From the Sector

At JEC World 2020, MECELEC COMPOSITES is a finalist of the JEC Innovation Awards in the Design & Furniture category. The Group announces the launch of a new sustainable development application on the urban design market. MECELEC COMPOSITES designed the first mass-produced flax fibre roofs for the 550 Morris columns installed by JCDecaux in Paris. “This is the first application of flax fibre BMC for mass production. The new solution combines all the advantages of composite materials, lightness and strength, with stringent environmental requirements and is adapted to the safety constraints of this kind of street furniture,” says Bénédicte Durand, Chief Executive Officer at MECELEC COMPOSITES.

A COMPOSITE ROOF THAT IS BOTH INNOVATIVE AND GREEN
The dome of the Morris columns is composed of 23 different parts, 14 of which are made from composite materials. To design the roof, MECELEC COMPOSITES developed a new RTM complex and a new BMC material, that is reinforced exclusively with a flax mat. “Today it is the only BMC with a 100% flax fibre reinforcement, which uses a partially recycled ABS resin. It was created specifically for this project and we had to work on the processes in order to adapt them to this new material,” explains Bertrand Vieille, Head of sales.
In the design, MECELEC COMPOSITES replaced the bonding process with a time-saving mechanical assembly process using an invisible fixing system.

AN ECO-FRIENDLY APPLICATION IN LINE WITH THE GROUP’S ECO-DESIGN CSR APPROACH
MECELEC COMPOSITES creates scalable, sustainable and environmentally-friendly street furniture. The Group is committed to developing a sustainable production process and reuses all its waste materials. MECELEC COMPOSITES R&D laboratory promotes eco-design with a process of characterisation and mechanical sizing of parts. “For this project, we imagined, created, produced and delivered a mass-produced composite application with a low environmental impact within less than a year. At the end of its lifecycle, the product completely breaks down, leaving no fibre residue,” Bénédicte Durand concludes.

After Interfilière and Milano Unica Iluna Group arrives at Première Vision, the other Parisian stop where to present the latest exclusive capsule

Iluna Group returns to Paris, this time to Première Vision, with an eco-sustainable lace collection and the brand new Yoga Capsule collection.

In the latest short film released on the Monforts YouTube Channel – captured at the recent Denim Première Vision show in London – some of the leading global manufacturers discuss their initiatives for more sustainable denim production.

Cone Denim, based in Greensboro, North Carolina, for example, can lay claim to having put in place its first environmental control measures back in the 1940s when the company first started recycling its water.

“It was a method of efficiency even back then, eighty years ago,” says Gabriel Magopat, of the company’s UK customer service centre, “but  producing high quality products is another method of being sustainable and of being efficient, and I think that’s what Cone stands for. We have an amazing history.”

Cone Denim is known for its signature S Gene® stretch denims which have traditionally incorporated polyester components to provide the stretch. It has now partnered with Intrinsic Advanced Materials of Gastonia, also in North Carolina, to introduce patent-pending CiCLO stretch polyester fibres into its denim collections. 

While still being synthetic based, CiCLO polyester is able to biodegrade in marine environments, wastewater treatment plants and landfill conditions, at rates similar to natural fibres like wool. 

This more sustainable solution for stretch is also being introduced to China for the first time by another leading denim supplier, Advance Denim.

“Advance Denim is spending its resources on being the most technologically advanced company in China, and also the most sustainable,” says Mark Ix, the company’s Director of Marketing. “We are investing heavily in our manufacturing to save both water and chemicals to create cleaner products.”

Monforts denim customer Berto is a family-owned company with its main denim mill in Bovolenta, a small rural town near to Padua in the north east of Italy, where respect for the environment has always been a must.

“The family has always been focused on respect for the environment,” says Berto’s Marketing Manager Francesca Palento. “In particular, we have a river next to the company from which we take our water for production and we then return it cleaner than it was before. We are also now producing GOTS and Global Recycling Standard jean produced with yarns made from our own internal waste production.”

Pakistan’s Soorty has recently received Cradle to Cradle Gold certification – the most stringent and exacting sustainable standard currently in existence – for its Pure D range of denims. These are produced using the company’s proprietary Zero Waste Water dyeing technology, in combination with the most advanced Monforts finishing machines. 

“Our very latest collection is called Climate Jeans, because every single product we now produce draws attention to the climate emergency we are living through right now,” says Eda Dikman, Soorty’s Marketing Communications Manager. “Sustainability is very important to us because we produce at scale and all of the actions we take reflect on the planet.”

The Oerlikon Nonwoven experts will be presenting efficient solutions and comprehensive technology know-how for challenging filtration tasks to an international trade audience at the FiltXPO 2020 in Chicago, USA (Stand # 420), taking place between February 26 and 28.

Meltblown technology is one of the most efficient methods for producing very fine and highly-separating filter media made from manmade fibers. New, unique and highly-sophisticated filter media are easy to manufacture thanks to Oerlikon Nonwoven’s optimized meltblown technology. This process is characterized by its constant melt pressure distribution and consistent dwell time across the entire width of the spinning beam, Furthermore, the novel guidance and distribution of the process air outside the coathanger distributor offered by the Oerlikon Nonwoven technology prevents so-called hotspots, which overall ensures particularly homogeneous nonwoven properties and basis weights even in the case of delicate raw materials.

The Oerlikon Nonwoven charging unit stands out against other concepts currently available on the market. Users can freely choose from a large number of variation possibilities and set the optimum charging method depending on the filter application, allowing the Oerlikon Nonwoven charging unit to also be used for the manufacture of EPA- and HEPA-class filter media.

The new forming section ensures improved nonwoven formation evenness across the entire width, even in the case of high spinning speeds, special polymers and polymer combinations. In addition to this, the newly-designed system also ensures that nonwovens only require minimal edge trimming at the end of the production process. The newly-developed mixedfiber technology enables the combining of various filament cross-sections and polymers, in order to set ideal filtering and pleating performances, for example.

The origins of both Industry 4.0 and an awareness of the need for more sustainable manufacturing methods can arguably be traced back to the year 1971.

It was in 1971 that the first microprocessor was introduced by Intel, and also that the first and perhaps now most well-known environmental campaigner, Greenpeace, was founded.

As such, a direct line can be charted from that year to today’s automated textile manufacturing machinery concepts, as well as the drive to develop more increasingly resource-efficient processes.

All of the recent innovations which have been introduced to the market by A. Monforts Textilmaschinen GmbH & Co. KG, for example, are being powered by the possibilities of Industry 4.0 and developed in response to the market demand for more sustainable production.

They include the new ‘digital twinning’ capability introduced in 2019 for all Monforts machines, with advanced sensor technologies which make it possible to access comprehensive technical machine data from any location using the company’s Smart Support and Smart Check apps. In addition, the digital twin system provides information on individual wear parts, such as, for example, converters or gears.

These latest developments have been very favourably received by Monforts customers, especially in Europe.

50th anniversary
The very first Heimtextil – the leading trade fair for the home textiles market – was also held in Frankfurt in January 1971 and Monforts customers Bierbaum Group and Konrad Hornschuch AG are amongst the German companies who were there from the very start and have attended every annual show since.

Bierbaum Group, based in Borken, is the company behind the well-known Irisette bedding brand and is celebrating its own 125th anniversary in 2020. It has also introduced products bearing the German government’s new Grüner Knopf textile seal of approval for sustainable production.

As a specialist in synthetic leathers for home surfaces, as well as vehicle interiors, Konrad Hornschuch AG, of Weissbach, has been a member of the €44 billion automotive giant Continental AG since 2016.

Representatives from both companies received memorial trophies at a special presentation held on January 7th during the 50th anniversary Heimtextil show.

The home textiles market remains very strong in Germany, with sales amounting to some €9.6 billion in 2019, according to analyst IFH Cologne.

Global growth
The first Heimtextil in 1971 was a significant success, attracting 679 exhibitors from 26 countries.

This year’s show, however, attracted a total of 2,952 exhibitors from 66 countries, reflecting not only the growth of the home textiles industry, but also the globalisation which has taken place over the last half century.

Monforts now has customers for its advanced finishing technologies around the world, with home textile customers from India and Pakistan being particularly well represented at Heimtextil 2020.

Among stand outs from Indian companies at this year’s show was the 2020 collection of Welspun India’s famous Christy England brand, inspired by botanical studies of the gardens of British stately homes. Welspun towels meanwhile benefit from the company’s HygroCotton hollow core yarn technology, produced by a proprietary spinning method which ensures they become softer, fluffier and more absorbent after every wash.

An equally ground-breaking new technology is being introduced by Trident Group, which is one of India’s largest vertically-integrated home textiles manufacturers and two years ago installed five complete Monforts finishing ranges for its new linen department.

Trident’s patented Air Rich yarns feature pores throughout their cross sections for high breathability and absorbency, as well as rapid drying.

Monforts home textile customers from Pakistan stressed the resource efficiency of their processes and products as a result of investments in advanced technology, and during the show the ‘Sustainable Pakistan’ initiative was announced.

Supported by GIZ, the German Society for International Cooperation, the initiative aims to reshape global perceptions of Pakistan’s manufacturers and their innovations. So far, twenty producers have been carefully chosen to be presented on this global platform and will help rebrand Pakistan’s textile industry at the Heimtextil exhibitions going forward.

Heimtextil’s organiser Messe Frankfurt also announced its own new alliance with the United Nations Office for Partnerships, in order to support the UN’s Sustainable Development Goals.

Constancy
Many things have changed since 1971 and home interiors are certainly no longer predominantly orange and brown – and perhaps unlikely to ever become so again.

It’s clear, however, that there has been a constancy in the push to consistently improve textile technologies, processes and products that may have originated in Europe, but have subsequently spread around the world.

And the significance of both microprocessors and sustainability in 2020 could only have been guessed at back in 1971.

Tailor-made solutions for hygiene, medical, filtration and other technical applications as well as extensive product and process know-how – with these arguments Oerlikon Nonwoven made a convincing appearance at the 18th Shanghai International Nonwoven Exhibition (SINCE) that took place from December 11 to 13.

Dr. Ingo Mählmann, Head of Sales and Marketing of Oerlikon Nonwoven, was very pleased with the three lively days at the trade fair: "The many discussions showed that we are on the right track with our strategy and the further development of our technologies with regard to nonwovens. Visitors were impressed by our technology solutions for disposable nonwoven fabrics or geotextiles". Almost all wellknown nonwoven fabric producers visited the trade fair stand of the plant manufacturer from Neumünster to find out about the advantages of spunbond, meltblown and airlaid technologies.

Overall, the nonwoven fabric team of the Oerlikon Group draws a very positive conclusion and looks back with satisfaction on the intensive and good quality discussions as well as numerous concrete inquiries from customers and prospective customers.

A successful autumn season for Sappi at a collection of trade fairs, with exceptional interest shown in innovative packaging papers

Sappi Europe has presented its solutions for sustainable, future-oriented packaging at three trade fairs in the past few weeks. The globally operating paper specialist’s extensive product range has been serving as a benchmark in the industry for years and now includes the functional barrier papers from the Sappi Guard family, the sealable packaging paper Sappi Seal and the folding boxboard Atelier. The showcasing of innovations in sustainable packaging papers will continue at interpack in Düsseldorf in May 2020.

“Environmentally friendly packaging” was the first leading theme of FachPack, which, according to Messe Nürnberg, really had its finger on the pulse. This theme also was given top priority by visitors that were attracted to the Sappi stand, by its wide range of innovative and sustainable application solutions.

Huge demand for specific projects
Almost fifty per cent more branded goods manufacturers, converters, established customers and interested parties visited the FachPack stand in Nuremberg compared to the previous year – with specific projects in mind. For those planning to replace composite packaging with a paper-based solution with integrated functionality, Sappi presented its Sappi Guard barrierpapers and highlighted some related best practice references. This included the packaging solution for a new nut-fruit bar, recently introduced to the market, from a well-known brand manufacturer. The Sappi Guard range includes Sappi Guard M and Sappi Guard MS with a mineral oil barrier (MOB) and a grease barrier of Kit 11 or Kit 7. All Guard papers guarantee very high product safety and can be completely recycled. The integrated heat sealability was the focus of the development of Sappi Seal. René Köhler, Head of Business Development Packaging and Speciality Papers at Sappi, says: “Reducing the consumption of fossil resources in packaging is a major concern for Sappi. On this account, we developed Sappi Seal, a functional paper with integrated heat sealing functionality which is integrated in the form of a dispersion coating on the reverse side of the paper and can replace papers with a PE coating.” Sappi presented a wide range of successfully completed projects in order to demonstrate the specific application of this paper to the trade fair visitors.

Monforts Textilmaschinen GmbH & Co. KG will be providing information on its extensive range of coating and finishing technologies for the production of nonwovens and technical textiles at the forthcoming Techtextil India exhibition.

“India is already a very important market for Monforts and there are exciting prospects ahead for Indian manufacturers of technical textiles, who are well positioned to capitalise on growth opportunities,” says Monforts Head of Denim Hans Wroblowski, who will be at the Monforts stand in Hall 4, booth C52 at the show. “India has one of the largest working-age populations in the world and a complete textile value chain for both natural and synthetic fibres.”

In addition, he adds, India’s government, through its Ministry of Textiles, has been actively promoting the growth of technical textiles through various programmes based on investment promotion, subsidies, the creation of infrastructure and the stimulation of consumption.

As a result, India’s Ministry of Textiles is forecasting that the growth of technical textiles in the country will be over 18% annually in the next few years, from a value of US$16.6 billion in 2018 to US$28.7 billion in 2021.

Value addition

High value-added technical products such as wide-width digital printing substrates, carbon fabrics for high-performance composites, filter media, flame retardant barrier fabrics and heavy-duty membranes are now being coated on Monforts texCoat ranges and finished with the company’s industry-leading Montex stenters.

“Since we acquired the technology that our coating units are based on in 2015, we have made a lot of refinements,” says Hans. “All of these developments are reflected in higher coating accuracy and the resulting quality of the treated fabrics. At the same time, our latest multi-functional coating heads offer an unprecedented range of options, with a wide range of modules available.”

The texCoat user interface is now equipped with the unique Monforts visualisation system and the magnetic doctor blade has greater power reserves. Options include a carbon fibre-reinforced composite coating drum with a more scratch-resistant surface and maximum rigidity and remote control which simplifies exact adjustment for the operator.

Montex stenters in special executions are meanwhile ideal for the drying and finishing of both technical woven fabrics and nonwovens and characterised by high stretching devices in both length and width.

“The European-built Montex range of stenters has earned its leading position in the technical textiles market due to the overall robustness, reliability and economy of these machines,” Hans concludes. “Whatever the intended end-product – and we continue to discover potentially new areas in which technical textiles can be utilised all the time – we have the machine specification and know-how to turn ideas into reality. In India we also benefit from the strong sales and service support of A.T.E. Enterprises.”

Texchtextil India takes place alongside World of Composites at the Bombay Exhibition Centre in Mumbai from November 20-22.

• Acquisition drives market growth
• Additional sales channel for BASF customers and partners
• Access to new materials and technologies for customers of BASF and Sculpteo

To continue to expand its position as a leading service provider in the additive manufacturing sector, BASF New Business GmbH has formally agreed to acquire the online 3D printing service provider Sculpteo. The agreement was signed on November 14, 2019 and is expected to become effective in the next few weeks pending regulatory approval by the relevant authorities. The acquisition of the French 3D printing specialist based in Paris and San Francisco will enable BASF 3D Printing Solutions GmbH, a wholly-owned subsidiary of BASF New Business GmbH, to market and establish new industrial 3D printing materials more quickly. Sculpteo’s management team fully supports the acquisition and will remain in place to provide customers and partners with this expanded service spectrum.

For around a decade already, Sculpteo has operated an online platform with integrated production for the manufacturing of prototypes, individual objects, and serial production components with a range of different additive manufacturing technologies. Customers in various industrial sectors around the world use the Sculpteo service to produce new components rapidly and reliably.

BASF will develop the existing Sculpteo 3D printing platform further into a global network. For customers and partners, BASF 3D Printing Solutions will thus be able to offer an additional channel for marketing their services and expanding their own customer bases.

"Through the acquisition of Sculpteo, we can provide customers and partners with even faster access to our innovative 3D printing solutions. In addition, our customers will benefit from an extended range of services”, explains Dr. Dietmar Bender, Managing Director BASF 3D Printing Solutions. “Together with Sculpteo, we are pursuing our goal of establishing additive manufacturing as a proven technology for industrial mass production", says Bender.

Combining the strengths of both companies will provide Sculpteo's existing customers with access to a more extensive portfolio of 3D printing materials. "We are excited to join the BASF team and thus benefit from BASF’s outstanding R&D to provide our customers with innovative solutions”, says Clément Moreau, CEO and Co-Founder of Sculpteo. Moreau will stay with Sculpteo as CEO.

Beyond this, the Sculpteo Design Studio and BASF’s technical experts will collaborate to be able to support customers in their 3D printing projects from the early planning phase right through to the final printed part. This will enable BASF to offer its customers end-to-end industrial 3D printing solutions.

COBRA International, one of the world’s largest OEM manufacturers of composite products, is proud to announce its partnership with Skeeta Foiling Craft to build the new range of hydro foiling dinghies. Skeeta Foiling Craft, founded by father and son team Jim and David French, have been refining their unique concept for a simple, accessible hydro foiling dinghy in Australia since 2015. In collaboration with Dr Ian Ward’s Glide Free hydrofoil technology, Skeeta Foiling Craftdeveloped the 3.66m Skeeta and 2.9m Nikki dinghies that are available in both foiling and displacement sailing configurations, maximising the thrill of foiling in a versatile package that the whole family can use.

Jim French was determined to build the Skeeta hull using an expanded polystyrene (EPS) foam core and the single shot closed mould epoxy lamination process pioneered by the windsurf board market, making COBRA International the perfect build partner for series production. Skeeta Foiling Craft first contacted COBRA back in early 2016, when the company started developing initial hull production materials and processes that could match their targets for lightweight, durable and cost-effective construction.