From the Sector

Carbios  has been granted the building permit and operating authorization for the world’s first PET[1] biorecycling plant, allowing construction to start. The plant will be built in Longlaville in the Grand-Est Region on a 13.7-hectare site adjacent to the existing PET production plant of Indorama Ventures, its strategic partner.

This state-of-the-art facility, scheduled for commissioning in 2025, will play a crucial role in the fight against plastic pollution by providing an industrial-scale enzymatic recycling solution for PET waste. Carbios’ technology enables PET circularity and offers an alternative raw material to virgin fossil-based monomers, allowing PET producers, chemical companies, waste management firms, public entities, and brands to have an effective solution to meet regulatory requirements and fulfill their sustainability commitments. The plant will have a processing capacity of 50,000 tons of post-consumer PET waste per year (mostly waste that is non-recyclable mechanically, equivalent to 2 billion colored PET bottles or 2.5 billion PET food trays) and will generate 150 direct and indirect jobs in the region.
 
The plant will be built on a 13.7-hectare site acquired by Carbios on Indorama Ventures’ existing PET plant site without suspensive conditions. The land area gives the possibility to double the facility’s capacity.
 
A plant designed to minimize its carbon footprint
The plant is designed to maximize circularity, with high-quality output products, and minimize its environmental footprint, especially with regards to energy consumption. Optimizations are underway to further increase the recycling of water required for the process.

Located near the borders with Belgium, Germany, and Luxembourg, the plant’s location is strategic for nearby waste supply. Moreover, Carbios’ biorecycling technology can process complex waste that conventional technologies cannot recycle and produce food-grade products, enhancing the plant’s flexibility for waste supply. Carbios and Indorama Ventures will collaborate to ensure the feedstock supply of the Longlaville plant, located in a geographical area where the supply potential could reach 400,000 tons in 2023, and up to 500,000 tons in 2030 with improved selective collection.

Carbios has already secured an initial supply source by winning part of the CITEO tender for the biorecycling of multilayer food trays. The consortium composed of Carbios, Wellman (a subsidiary of Indorama Ventures), and Valorplast has been selected to handle 30% of the tonnage proposed by CITEO. Carbios will handle the portion of the flow consisting of multilayer food trays at its Longlaville plant starting in 2025.
 
Plant funding secured
In July 2023, Carbios successfully completed its capital increase for approximately €141 million, the largest capital increase on Euronext Growth since 2015. This amount is mainly intended to finance the construction of this plant, for which the total investment is estimated at around €230 million. The portion of the investment not funded by the proceeds from the July 2023 capital increase is expected to be covered by Indorama Ventures, which plans to mobilize approximately €110 million for this project, French state subsidies of €30 million, and €12.5 million from the Grand-Est Region, as well as a portion of Carbios Group’s available cash, which amounted to €78 million as of 30 June 2023.

Carbios announced the strengthening of its leadership team with the appointment of Bénédicte Garbil as Senior Vice President of Corporate Affairs and Sustainability. Bénédicte Garbil oversees three strategic areas: Public Affairs, Corporate Affairs, and Sustainability. In her Corporate Affairs role, she supervises Communication, Regulatory, Project Management, and Innovation Funding functions. In her Sustainability role, she oversees CSR, QHSE, and LCA functions. Bénédicte Garbil also joins the Group’s Executive Committee.

Bénédicte Garbil started as a public affairs advisor at the French Federation of Healthcare Industries before becoming Director of Public Affairs at a pharmaceutical laboratory. In 2013, she joined the public sector, first working at the General Directorate of Enterprises (DGE) as Head of the Health, Biotechnology, and Agri-food Industries Bureau, and then at the General Investment Commissioner’s Office (CGI) from 2014 to 2017 as Deputy Director of Health and Biotechnology. Her experience allowed her to gain expertise in public policies and funding innovative projects, contributing to the creation of public funding mechanisms supported by the French Program of Investments for the Future (PIA). After her public service, she led Edwards Lifesciences in France for 4 years, then founded a consulting company accompanying biotechnology and healthcare companies in their development, from valuation to market access, including industrial development in France. A graduate of Sciences Po Lille, she holds a master’s degree in health law and a university degree in pharmacoeconomics.

adidas Originals and Edison Chen announce their global partnership, adidas Originals by Edison Chen, as Chen makes his return to the brand to begin a new era of collaboration that will redefine creative innovation and build a cultural legacy for the future.

Chen is the Founder and Creative Director of global lifestyle brand CLOT, which is celebrating its 20th anniversary this year. After moving from Vancouver to Hong Kong in his youth, the clash of East meets West began for him as he adapted to the exposure to different cultures. His experiences and new perspectives opened his eyes to globalism and started to lay the foundation for what would eventually become CLOT.

For his partnership with adidas Originals, Chen will bring an innovative vision and creative prowess to introduce exclusive collaboration styles, leveraging adidas’ extensive archive and history in the process. With a focus on fostering cultural exchange between the East and West, adidas is partnering with Chen to introduce collections that push boundaries and defy the norms with his thought-provoking designs.

Celebrating the shared commitment to creative innovation between adidas Original and Edison Chen, the “Change The Generation” collection explores three distinctly different styles ranging from ultra-lifestyle to formal dress and active/streetwear bringing to life a collection that can be explored individually as well as a collision of the three lifestyles together.  

Pieces from the collection will start becoming available in January 2024.

Digital fashion outlet Otrium announces the launch of a dedicated garment refurbishment and repair programme for damaged returns following a successful pilot scheme. The initiative is being run in partnership with Bleckmann, experts in supply chain management for fashion and lifestyle brands. Working with Bleckmann’s team of circular fashion experts from The Renewal Workshop, Otrium is taking the next step in its strategic journey to help reduce the number of that might ultimately end up in landfills or destroyed.
 
Most of the returns that Otrium currently receives can be easily restored and put back on sale. However, in rare cases, returned items are damaged. “Preventing waste is an important part of Otrium’s DNA, and thanks to our partnership with Bleckmann and their Renewal Workshop team, we can now repair the majority of damaged returns and put them back into circulation,” said Kevin Carolan, Director of Logistics at Otrium. “We are happy that we can use our position in the fashion supply chain to create lasting change and accelerate towards our mission of reducing the volume of garments that go to landfill.”

Since 2020, Otrium is exploring refurbishment and repairs with their third-party logistics provider Bleckmann. In April 2023, both partners started a three-month pilot at Bleckmann’s facility in Almelo, the Netherlands, to expand the programme with a broader range of repairs and optimised processes through data use. During the pilot, the Renewal Workshop team at Bleckmann refurbished more than 1,000 returned garments, shoes and accessories for Otrium each month.

“With hundreds of high-end labels on the platform, we needed an efficient solution tailored to the needs of a wide range of products – from shoes and coats to bags,” explained Marlot Kiveron, Head of Sustainability at Otrium. “The Renewal Workshop team worked closely with us to develop a streamlined and scalable process that could grow in line with our ambitions, delivering like-new repairs at the speed of e-commerce. Their combination of purpose, professionalism, agility and expertise makes them the ideal partner for this kind of project.”
 
Bleckmann’s integrated data capabilities were also crucial to the success of the partnership. “Data collection and analysis can be vital in demonstrating the commercial viability of sustainability initiatives,” said Tamara Zwart, Director of Renewal at Bleckmann. “Using our advanced stock tracking systems, we determined that 70% of the renewed Otrium stock had been sold within seven weeks. We’re all delighted with the results!”
Furthermore, carbon-tracking software Vaayu calculated that on average, a refurbished return sold on Otrium avoids 2.760kg of carbon emissions and 69g of waste proofing that this programme can have a positive impact on both: the planet and the business.

Having established the business case, the team decided to expand the initiative beyond the pilot phase. “This project is a milestone in our sustainability journey,” concluded Marlot. “It’s a key part of our ongoing commitment to finding more ways to reduce our environmental impact while helping to ensure that more clothes get worn. By the end of 2023, we aim to repair at least 25,000 damaged garments. Together with Bleckmann and their renewal experts, we’re well on our way to proving that this circular business model can be a valuable part of our future growth.”

The new Orthopac RXVMC-20 automatic straightening system for forward control of knitwear with strong distortions can remove distortions in textile webs even faster and more precisely.

"With the new straightening concept, special attention was paid to the straightening mechanics and their interaction with the analysis electronics of the scanner system," explains Head of Sales Thomas Höpfl. Two individually controlled and driven straightening modules with a total of four bow and three skew rollers ensure that the correction of bow and skew distortions takes place in small steps. The control concept is also new. A scanner group at the infeed of the straightening machine detects distortions even before they reach the correction rollers. This way, the rollers are brought directly into position and the fabric is corrected from the very first centimetre. A scanner group at the outlet also detects possible residual distortion, which is corrected at the second straightening module. This enables an even more precise and faster response when it comes to reacting to rapidly changing distortions.

The Orthopac RXVMC therefore shows its full strength when straightening knitwear and distortion-sensitive fabrics. Knitted fabrics are special in terms of distortion dynamics. It is difficult for operators when changing the fabric rolls to join the relatively short fabric webs with weft and loop-straight seams. Before and after unavoidable insufficient seams, the distortion (e.g. right before to left before) changes abruptly. Conventionally, the distortion change is only detected by scanning at the output of the straightener.
 
The RXVMC concept enables a shortened reaction time to jumping distortion, (especially in the case of seams) due to the improved scanning concept with scanning at the outlet and inlet. This reduces knitted fabric outside the straightening tolerance up to 50 percent after each seam. Fewer fabric pieces have to be reprocessed. It guarantees higher quality goods and thus less waste.

Since the rapid growth brought about by the pandemic, the technical textiles and nonwovens markets are stabilising towards a new normal – one in which technological innovation, sustainable development, and intelligent manufacturing are the most sought-after qualities. Held from 19 – 21 September 2023 at the Shanghai New International Expo Centre, the fair amplified this new industry direction, both through its fringe programme and across the booths of the 40,000 sqm show floor. With a nearly one-third increase from 2021, 467 exhibitors representing 13 countries and regions engaged a significantly international visitor flow, numbering 15,542 total visits from 52 countries and regions. Suppliers showcased up-to-date products for multiple application areas, with various equipment, technical textiles and nonwovens for agriculture, automotive, protective apparel, and medical and hygiene especially prevalent.

Speaking at the fair’s close, Ms Wilmet Shea, General Manager of Messe Frankfurt (HK) Ltd, had an optimistic outlook for the future of the sector: “Sustainability and innovation often go hand-in-hand, and walking through the various halls, zones, and pavilions these past few days the evidence for this was widespread. With environmental protection more important than ever, and buyers across application areas increasingly sourcing eco-friendly solutions, our exhibitors were well-placed to meet that demand. This fair is consistently at the leading edge of technological progress, and with the global and domestic markets showing signs of improving further, we are already looking forward to what we can offer at next year’s edition.”  

With many overseas exhibitors making a comeback, this year’s fair was marked by the return of the Taiwan Pavilion and the 40-exhibitor strong European Zone. Beyond the international areas, domestic pavilions were organised by Beijing Guanghua, China Hang Tang Group, Funing, Jiujing, Shenda, Tiantai, Xianto, and Xiqiao, showcasing nonwovens for various sub-sectors, including filtration and medical. Valuable insights were exchanged at multiple fringe events, including the 11th China International Nonwovens Conference, the Advanced Technical Textiles Industry Chain Synergistic Innovation Development Forum, various events covering marine textiles and rope netting, and the “Kingsafe Dangs” National University Students' Nonwovens Development and Applications Showcase. Visitors, meanwhile, were pleased with the innovation on show across the entire platform.

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

ISKO provided their latest innovation in material science to British designers, Priya Ahluwalia, Masha Popova, Chet Lo and Aaron Esh, for the London Fashion Week SS24 season.

Alongside supplying their latest denim fabrics, ISKO opened its doors to its London-based product development centre, Creative Room London, for finishing and washing of their final designs as well providing expertise and knowledge in denim design and construction.

Priya Ahluwalia
For Ahluwalia’s Spring Summer 24 collection, entitled Acknowledgements, Creative Director and founder Priya Ahluwalia’s research led her on a journey of creative rediscovery.
ISKO’s Ctrl+Z fabric, which is made entirely from recycled and regenerated fibres, was used to create the flower motif denim showcase within 3 looks across jeans and jackets. This development contains no virgin cotton and uses a minimum of 60% recycled materials and the remainder is regenerated cellulose fibres while still giving a look and feel identical to traditional denim and speaks to Ahluwalia’s ongoing commitment to sustainable design and business practices.

Chet Lo
This season, Chet Lo took an active stand in reclaiming the power lost during his youth, healing the childhood wounds inflicted by a society that sidelined differences instead of celebrating them.
ISKO’s Ctrl+Z fabric and specialist lasering techniques from ISKO’s Creative Room was used across three looks featuring signature Chet Lo erotic laser prints across denim bottoms.

Aaron Esh
The SS24 season marked the brand’s debut at London Fashion Week, a homecoming of sorts for Esh, who was born and raised in the heart of the British capital, studied at Central Saint Martins and became a finalist at the LVMH Prize earlier this year. The early impulses of Aaron Esh remain steadfast: clothes that combine establishment rigour with the rebellious spirit of youth culture, devotedly crafted for a generation who feels somewhere in-between.
Aaron created bootleg denim ripped jeans made entirely from ISKO Denim using R-TWO50 fabric, which comprises a minimum of 50% pre and post-consumer recycled content. The designer noted the addition of denim accompanied by leathers add a new level of depth to their latest collection.

Masha Popova
Masha Popova’s sophomore catwalk outing, MONSTER was a “seasonless” offering that combines Autumn Winter 2023 and Spring Summer 2024.
Masha continued her obsession with denim manipulation, using various finishings including over-dyeing, flocking, patchwork, scratching and fraying in a variety of colours from vibrant green to silver across jeans, tops and jackets, all developed with the help of ISKO’s Creative Room, London.

Santoni Shanghai Knitting Machinery Co., Ltd. announced the strategic acquisition of Terrot GmbH, a manufacturer of circular knitting machines based in Chemnitz, Germany. The move comes as the latest development in Santoni Shanghai’s long-term vision to build an ecosystem that aims to reshape and consolidate the circular knitting industry. The transaction will be finalized pending approval from Chinese regulatory authorities.

The global circular knitting machine market is expected to see significant growth in the coming years, with a July 2023 report from Consegic Business Intelligence forecasting a 5.7% CAGR from 2023 to 2030, propelled by an increasing consumer preference for breathable and comfortable knitted fabrics as well as increasingly diversification of demand for knitted apparel. To seize this market opportunity, Santoni Shanghai has developed an ambitious strategic plan centered around innovation, sustainability and digitalization. The new partnership with Terrot aims to further this strategy by enhancing Santoni’s integrated and scaled-up ecosystem, while also driving the sustainable development of the global knitting machinery industry.

“With the strategic investment of Santoni, we aim to strengthen our position as the preferred solution provider to many of the world’s leading textile manufacturers and top brands as well as continue working with industry talents as we provide valuable and essential know-how to drive premium ‘Made in Germany’ textile machinery.” said Robert Czajkowski, Managing Director of Terrot GmbH. "We have found a strong, globally active partner with clear dedication to quality, performance and excellent expertise in all circular knitting segments, who understands the unique value proposition and potentials of our portfolio and with whom we can realize our growth objectives” he added.

Die AZL Aachen GmbH, bekannter Innovationspartner für Industriekooperationen auf dem Gebiet der Leichtbautechnologieforschung, startet eines neuen Projekts mit dem Titel "Trends und Designfaktoren für Wasserstoffdruckbehälter". Das Projekt wird Fragestellungen der Industrie in Bezug auf die Wasserstoffspeicherung adressieren.

AZL Aachen GmbH, a recognized innovator in lightweight technologies research and industry collaboration, announces the initiation of a new project titled "Trends and Design Factors for Hydrogen Pressure Vessels". The project aims to address industry needs surrounding hydrogen storage.

Hydrogen has gained significant attention as a key technological solution for decarbonization, with high pressure storage and transportation emerging as vital components. Its applications extend from stationary storage solutions to mobile pressure vessels employed in sectors such as transportation and energy systems.

The AZL team, renowned for its high reputation in providing market and technology insights as well as developing component and production concepts in the format of Joint Partner Projects seeks for companies along the whole composite value chain interested in further developing their application know how in this economically highly relevant field.

The project will provide an in depth exploration of market insights, regulatory standards, and intellectual property landscapes. Beyond this, there is a dedicated focus on staying updated with state of the art and advancements in design, materials, and man ufacturing techniques.

An integral component of the project involves the creation of reference designs by AZL´s engineering team. The reference designs will encompass a variety of pressure vessel configurations and will consider a diverse range of materials and production concep ts.

With the scheduled project start in October 2023, and a project timeline of approximately nine months, AZL encourages companies active across the composite value chain to participate. Companies interested in participating or seeking further information should reach out directly to the AZL expert team.

SETEX Schermuly textile computer GmbH, a global leader in manufacturing process management software and textile machinery controls, is pleased to announce the transfer of a majority stake to Elvaston Capital Management GmbH.

Private equity partner Elvaston has established the overarching Textile Solutions Holding GmbH. This company will manage a portfolio of technology companies that ensure seamless integration along the textile process chain and introduce unique market functionalities.

The current company owners of SETEX, Christoph and Oliver Schermuly, will continue their roles as managing directors.

SETEX is convinced that this step will further expand SETEX's competitiveness and growth potential.