From the Sector

• Textile Exchange report shows growth of preferred fiber and materials market needs to be accelerated
• With post-pandemic fiber production increasing, the transition to preferred fibers and materials must be a non-negotiable decision, notes Textile Exchange.

According to a new Textile Exchange report, the market share for preferred fiber and materials grew significantly in 2020. The Preferred Fiber and Materials Market Report 2021 outlines the market for plant fibers such as cotton, hemp, and linen; animal fibers and materials such as wool, mohair, cashmere, alpaca, down, silk, and leather; manmade cellulosics (MMCFs) such as viscose, lyocell, modal, acetate, and cupro; as well as synthetics such as polyester, polyamide, and more.

The report is a unique annual publication about global fiber and materials production, availability, and trends, including those associated with improved social and environmental impacts, referred to as ”preferred.” The comprehensive report includes quantitative data, industry updates, trend analysis and inspiring insights into the work of leading companies and organizations as they create material change.

The results show that between 2019 and 2020 the market share of preferred cotton increased from 24 to 30 percent and recycled polyester from 13.7 to 14.7 percent. Preferred cashmere increased from 0.8 to 7 percent of all cashmere produced while Responsible Mohair Standard certified fiber expanded from 0 to 27 percent of all mohair produced worldwide in its first year of existence in 2020. The market share of FSC and/or PEFC certified MMCFs increased to approximately 55-60 percent. While the market share of recycled MMCFs is only 0.4 percent, it is expected to increase significantly in the following years.

Brands’ increased interest in the use of preferred fibers and materials was also demonstrated by 75 percent increase in the total number of facilities (to 30,000) around the world becoming certified to the organization’s portfolio of standards in 2020. However, the report also notes that despite the increase, preferred fibers only represent less than one-fifth of the global fiber market. Less than 0.5 percent of the global fiber market was from pre- and post-consumer recycled textiles.

Indeed, global fiber production has almost doubled in the last 20 years from 58 million tonnes in 2000 to 109 million tonnes in 2020. While it is not yet clear how the pandemic and other factors will impact future development, global fiber production is expected to increase by another 34 percent to 146 million tonnes in 2030 if the industry builds back business as usual. If this growth continues, it will be increasingly difficult for the industry to meet science-based targets for climate and nature.

Textile Exchange aims to be the driving force for urgent climate action, and its Climate+ strategy calling for the textile industry to reduce greenhouse gas emissions by 45 percent by 2030 compared to a 2019 baseline in the pre-spinning phase of textile fiber and materials production, while also addressing other impact areas interconnected with climate such as water, biodiversity, and soil health.

There has been a sharp rise in demand for organic cotton products. Compared to conventionally grown cotton, the cultivation of organic cotton requires the renunciation of genetically modified seeds, chemical pesticides or fertilisers. Nevertheless, genetic modifications are repeatedly found in textiles that are falsely labelled with organic claims. Often, available certification systems are not backed up by lab testing. At best, they only take random seed samples. Textile testing specialist, Hohenstein, has developed an assessment method specifically for cotton. This new DNA analysis method makes it possible to ascertain the amount of genetically modified cotton contained in products. This is good news for textile industry stakeholders who will be on the safe side in terms of quality control and labelling of organic cotton products.

First step: qualitative screening and identification. Second step: quantification of genetically modified cotton.
For qualitative screening, Hohenstein experts had developed molecular biological detection systems to make clear yes/no statements about genetically modified cotton. Testing can be applied to all kinds of materials, from raw cotton to chemically untreated yarns and fabrics. In addition, Hohenstein is one of only a few laboratories in the world accredited to test for GMOs in accordance with the ISO/IWA 32:2019 protocol. Its method provides reliable evidence of the presence or exclusion of genetic modification in cotton textile precursors.

Once qualitative proof of genetic modification is obtained, Hohenstein experts begin quantifying the type and extent of the genetic modifications. To do this, they use DNA analysis to search for different cotton lines known to contain genetic alterations and quantify the proportion. Only by pinpointing individual genetic modifications and quantifying the extent of modification is it possible to provide precise information on whether there is an extremely small proportion of contamination, or whether larger proportions of GMOs have been mixed in. This offers clear benefits to manufacturers, brand owners and retailers when it comes to supply chain transparency and fraud prevention.

• The National Council of Textile Organizations (NCTO) Welcomes Senate Passage of Infrastructure Bill

WASHINGTON—The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement today welcoming Senate passage of a bipartisan infrastructure bill that will provide billions of dollars in new spending to revitalize the nation’s roads, bridges and railways and help reconstitute a domestic supply chain for personal protective equipment (PPE).

“We commend the Senate for passing the bipartisan infrastructure bill, which will provide critical resources for our nation’s aging infrastructure and at the same time help incentivize the reshoring of personal protective equipment (PPE) production, an important priority of the U.S. textile industry,” said NCTO President and CEO Kim Glas.

NCTO worked with congressional allies to include a version of the Make PPE in America Act, legislation co-sponsored by Senator Rob Portman (R-OH) and Senator Gary Peters (D-MI), in the infrastructure legislative package. The bill ensures all PPE purchased by the Departments of Homeland Security, Health and Human Services and Veterans Affairs are Berry Amendment-compliant; guarantees long-term contracts (a minimum of two years) to U.S. manufacturers; and creates a tiered preference for PPE made in the Western Hemisphere by our free trade partners using U.S. components, after domestic manufacturing capacity has been maximized.

“We sincerely thank Senator Portman and Senator Peters for working to include their Make PPE in America Act in the infrastructure bill,” Glas said. “This bill will help onshore critical production of personal protective equipment (PPE) by guaranteeing long-term contracts for domestically produced PPE and ensuring that taxpayer dollars are utilized to bolster the federal purchase of American-made PPE.

The U.S. manufacturing industry has produced over a billion lifesaving PPE and other medical products over the last year, as NCTO members retooled production chains in response to the nation’s needs. We will continue to urge the government to purchase Berry-compliant products containing 100 percent domestic content for PPE to help bolster the full U.S. production chain in the future.”

• Expanding additive manufacturing technology portfolio for next generation of sustainable on-demand textile production

Kornit Digital Ltd. (NASDAQ: KRNT), a worldwide market leader in digital textile production technologies, announced the acquisition of all associated assets of Somerville, Massachusetts-based Voxel8.  

Voxel8’s advanced additive manufacturing technology for textiles allows for digital fabrication of functional features with zonal control of material properties, in addition to utilizing high-performance elastomers adhering to inkjet technology.

"By integrating Voxel8’s technology into Kornit’s product roadmap, we will be able to transform numerous market segments and verticals, accelerating our collective visions and technology advancements," . “Voxel8 offers direct 3D print-on-part capabilities, advanced design software that can be easily integrated with any production floor software workflow, and versatile chemistry enabling on-the-fly formulation of high-performance elastomers to change the material properties of the resulting printed structures by multiple orders of magnitude. This means reflective, high-density, silicone and metallics, as well as compression elements for sports and therapeutics, protection elements like cushioning and impact resistance, and functionality applications like anti-slip, waterproofing, and other qualities combining form and function that are key to Kornit’s vision of digitizing production in every conceivable manner,” explained Kobi Mann, Kornit Digital Chief Technology Officer

Officina+39, an Italian company specialized in research and chemical application in the textile and fashion sector, has joined the BLUESIGN's network of chemical excellences.

This landmark confirms a longstanding pledge to minimize environmental impacts by envisioning and developing forefront solutions and technologies that reduce the use of energy and hazardous chemicals, while increasing waste recycling and water conservation. Together with the high-profile players involved who share BLUESIGN’s purposes, the company will work to ensure a responsible use of resources and to guarantee the highest possible degree of consumer protection.

Eager to constantly grow and improve, Officina+39 has recently extended its commitment to innovation to its own Headquarters too, by moving to a brand new facility in Biella (Italy).

Solid net profit and further strengthening of the balance sheet thanks to significant revenue and profitability increases

The automobile industry recovered significantly in the first half of 2021 compared to the prior-year period, which had been impacted by the effects of the coronavirus pandemic. Autoneum benefited from the market dynamics and managed to increase its revenue in local currencies by 24.3% in the first semester. EBIT rose to CHF 44.7 million thanks to higher revenues and further progress in the turnaround in North America, corresponding to an EBIT margin of 5.0%. The strong free cash flow of CHF 67.2 million has allowed for a further reduction in net debt.

In the first half of 2021, 29.2% more light vehicles were produced worldwide than in the coronavirus-hit first half of 2020. The market recovery, though significant, was hampered by the global semiconductor shortage, which led to temporary production stoppages and manufacturers producing lower vehicle volumes. Autoneum increased revenue in local currencies by 24.3% in the first six months. In Swiss francs, revenue climbed by 21.9% to CHF 890.3 million. Business Group SAMEA (South America, Middle East and Africa) grew clearly above market, while the shortage of semiconductors in North America in particular impacted the production of models supplied by Autoneum and the revenue development of Business Group North America.

Autoneum managed to improve its operating result (EBIT) considerably by CHF 76.5 million in the first six months compared to the prior-year period. In addition to higher revenues, this was mainly due to the immediate and sustainable adjustment of the cost structure in all Business Groups to the new market reality in 2020 as well as the improved earnings achieved in the turnaround program in North America. Higher material costs, however, had a negative impact on the operating result. EBIT in the amount of CHF 44.7 million (prior-year period: CHF –31.8 million) corresponds to an EBIT margin of 5.0% (prior-year period: –4.4%).

The development of global light vehicle production in the second half of 2021 remains uncertain due to the semiconductor shortage. Although there is a high demand from end customers in all regions, it can be assumed that the shortage of chips will continue to impact automobile production in the second half of the year, but not as severely as in the second quarter of the first half-year.

Revenue in the second half-year 2021 is expected to be higher than in the first semester. Based on the unfavorable allocation of semiconductors to vehicle models supplied by Autoneum in the first half of 2021, revenue development is likely to be slightly below market for the full year 2021. With an easing of the semiconductor shortage, this will normalize.

Weko Holding GmbH has taken over RotaSpray GmbH from Oehringen with retroactive effect from January 1st, 2021 and further expands its textile segment.

With the merger of the two companies, the competencies in the field of functional wet finishing, digital printing pre-treatment and spray dyeing processes will be bundled for the textile segment. Both companies believe that these segments offer good future opportunities, because the demand for a resource-saving, CO2-reduced dyeing and finishing process for textile yarns and fabrics is increasing rapidly. Likewise the market trend of ever smaller production lot sizes per order.

RotaSpray GmbH will continue to be managed as an independent unit within the WEKO Holding Group and will focus purely on the high-quality textile sector.
WEKO has been developing and producing non-contact application systems for product optimization and surface finishing with different types of liquids and powdery substances since 1953. The areas of application are broad and the nonwovens, paper, tissue, printing, wood fiber boards, foils and metal industries are successfully supported with WEKO solutions.

The 48^th INNATEX is opening its doors at the Messecenter Rhein-Main in Hofheim-Wallau from 31 July to 2 August 2021. More than 200 labels are poised to appear at the international trade fair for sustainable textiles. Following a long string of industry gatherings being cancelled due to COVID-19, the summer trade fair is a first opportunity for the sector to get together. All visitors are required to register digitally  in advance of the fair.

The pandemic has presented an opportunity to launch new projects. They include a special zone created in collaboration with GIZ GmbH, the German society for international development, which will shine a light on African designers. 13 labels from Ethiopia, Kenya, Rwanda, South Africa, Tanzania, and Uganda will present their ideas for sustainable textiles and fashion products.

The starting point for the special area is a virtual trade fair, commissioned by the Federal Ministry for Economic Cooperation and Development. GIZ GmbH has realised the joint project in cooperation with several partners; its physical extension can be visited at INNATEX.

Exhibitors include well-known pioneers and young newcomers
The IVN (International Association of Natural Textile Industry), which sponsors INNATEX, is staging its own pop-up showroom. In doing so, the association is creating its own curated space, showcasing the diversity and special features of its members. The future objective is to expand this space with the organiser to create a growing Concept Area that introduces visitors to different ways of presenting green fashion.

Besides the IVN, the Global Organic Textile Standard, the Green Button and Fairtrade are among the other standardisation bodies represented at the fair. In addition, a special exhibition entitled “Fashion in the Hood” (Fashion im Kiez) and delivered by the young interest group “Frankfurt Fashion Movement”, helps visitors join the dots in the fashion industry. Among the labels exhibiting at the fair for the first time are Active Wear by Klitmøller Collective from Denmark, Organic Fashion by Bibico from the UK and Italian sneaker brand ACBC.

Avery Dennison, a global leader in innovation, materials science, branding and manufacturing, and Shenzhou International Holdings Ltd., one of the world’s largest vertically-integrated knitwear manufacturers, hosted a grand opening event for the launch of ADX Lab Ningbo, an experience hub co-created by the two innovators, located in Ningbo, China.

Themed “Newness is the Name of Your Game,” the opening event brought together leading global apparel and footwear brands. Offering a bespoke lab experience, an insightful seminar, and a plant tour, Avery Dennison shared the cutting-edge fashion trends for seasons ahead and launched new design concepts and solutions. Industry stakeholders saw how ADX Lab Ningbo empowers global apparel and footwear brands with Avery Dennison’s end-to-end solutions, bringing their innovative ideas to life, telling their brands’ story, and helping them create cutting-edge, diverse products.

ADX, which stands for “Avery Dennison Experience,” offers a future-focused platform for apparel industry stakeholders to see innovative technology, materials and solutions, and explore how these breakthrough technologies can be put into development. At ADX Labs, Avery Dennison engages apparel and footwear brands around the globe, co-creating the next breakthrough solutions. ADX Labs will launch new collections and solutions biannually across digital production techniques, external embellishments, packaging, automation and more. The newly-launched ADX Lab Ningbo is Avery Dennison’s fourth ADX Lab across the globe, joining the innovation and experience hubs in Norway, Italy, and Panyu, China. Avery Dennison will expand its hub in the USA in January next year.

During the ADX Lab Ningbo launch event, Avery Dennison’s revealed its newest portfolio for external embellishments. The collection was inspired by seasonal trends and featured sustainable production techniques, materials and designs. From larger graphics to small details, different materials and technology were juxtaposed and brought to life in novel ways. The results are over 90 bespoke graphic technique combinations – covering heat transfer labels, woven, embroideries and more, spanning performance, lifestyle and team sports.

“Avery Dennison joined forces with Shenzhou International to introduce a broader vision for innovation to our global customers to help apparel and footwear brands stay ahead of industry trends and, ultimately, achieve their business goals,” said Michael Barton, vice president and general manager, global commercial, apparel solutions, Avery Dennison. “We believe that inspiration and innovation should never be limited by geographic location. Therefore, virtual experiences will be available at the ADX Lab Ningbo starting July 30. Our customers can be inspired by this immersive experience from the comfort of their own homes.”

“The partnership between Avery Dennison and Shenzhou International can be traced back to 2005. Over the past 16 years, the innovation driven by this important partnership has allowed both corporations to expand the scope of services in our businesses. By incorporating innovation throughout the process to product offerings, our customers are empowered to scale their businesses in more creative, diverse and personalized ways,” said Ally Feng, vice president and general manager, Greater China, Avery Dennison RBIS. “The launch of the ADX Lab Ningbo is another momentous step forward in our joint pursuit to drive innovation for the industry. Moving forward, we will continue to work together closely to serve the needs of apparel and footwear brands around the world, accelerating innovation and shaping the future of the industry at large.”

Exploring the relationship between fashion, dreams and escapism
Curated by Ya'ara Keydar
July 13th, 2021 – December 11th, 2021

The Design Museum Holon unveils its newest and most ambitious fashion exhibition “The Ball” spanning the entire museum. Taking an innovative approach from Design Museum Holon’s previous fashion exhibitions, “The Ball” is a multi-sensory theatrical experience that combines fashion, sound, music, scenery, and lighting to showcase how dresses from the past resonate in today’s eveningwear design. The exhibition offers a dreamy experience full of fantasy, forging connections between the history of balls, Western fashion, and the current creations of Israel’s leading designers.

“The Ball” looks at past and present-day fashion, exploring the complexities woven into the longing for opulence and escapism. Throughout history, while balls were often reserved for the elite, fairytales provided a gateway into a world of imagination, overcoming social divides and barriers. Through a creative dialogue between the fantastic and the real, the exhibition invites visitors to explore the role of fashion and escapism in everyday life.

The exhibition displays approximately 120 ball gowns representing both historical and contemporary designs, which feature luxurious materials alongside surprisingly recognizable ones. In addition to the gowns, the exhibition showcases approximately 50 accessories created especially for the exhibition by Israel’s leading designers, including a display of glass Cinderella slippers printed in 3D, and a collection of hats inspired by desserts.

Participating designers:
Shadi Abed, Chen Adar, Shlomi Anteby, Rivi Avivi, Shahar Avnet, Idit Barak, Victor Vivi Bellaish, Berta, BOOBA MACHO by Karin Vasiluk, Hila Cohen, Luci David, Tatiana Davidov (Studio Tiamanta), Gadi Elimelech, Lia Fattal, Aviram Fima, Aharon Genish, Nimrod Gilo, Lee Grebenau, Brurya, Haritan, Nofar Hatuka, Lihi Hod, Iota Studio, Adi Karni, Ohad Krief, Galia Lahav, Ronen Levin, Rotem Levitan - Retema, Noam Levy, Alon Livne, Shady Francis Majlaton, Chana Marelus, Tal Medina, Moni Mednik, Yaron Minkowsky, Evyatar Myor, Maya Naé, Eliran Nargassi, Nataf Hirshberg and Yanky Golian, Dylan Parienty, Yaniv Persy, Ruth Philosoph, Assaf Reeb, , Katya Romantsov, Eden Saadon, Alon Shabo, Shai Shalom, Orwa Shareef, Sharon Tal, Maskit ,Rotem Shaul, Gal Shenfeld, Nadir Shoshany, Liora Taragan, Ariel Toledano, Michal Yersanesh Mangisto, Maor Zabar, Mira Zwillinger Studio

Visit DMH