From the Sector

• Specialised in dye-sublimation printing, the Italian company has conquered the heights of the high fashion sector with its top-quality printed fabrics.
• With its recent investment in a direct-to-fabric printing line, Digitak is preparing to expand its range of printed products, focusing on fabric differentiation.

Dye sublimation printing of high fashion designs is the beating heart of Digitak, an Italian company specialised in digital textile printing. Operating in the textile district of Lombardy, Italy, the company has established itself among the main suppliers in the world of high fashion and sportswear in just under 15 years.

Making production versatility one of the cornerstones of its philosophy, Digitak has continued to invest in technology, as well as research and development its product portfolio. This forward-thinking approach has enabled the company to guarantee innovative, personalised products with meticulous attention to detail, with the highest – almost obsessive – standards of quality and maximum design flexibility. Over the years, the extensive experience gained by the company’s management in the field of sublimation with traditional and digital techniques, combined with their investment decisions have allowed Digitak to enhance its production performance, gradually implementing higher quality standards and differentiating itself from the competition in the complex and competitive sector of high fashion. An important feat, which has not, however, dampened its enthusiasm and willingness to continue growing and exceeding its goals. The company’s latest investment in a direct-to-fabric digital printing line with pigment ink propels the company into a new and promising production dimension.

Sublimation printing specialists

Since Digitak’s establishment, Filippo Taccani, the founder and current owner of the company, had set himself a clear and ambitious objective: “I wanted to take up the challenge of operating digitally - printing fabrics using this innovative technology to create products on a par with those  I had achieved with traditional sublimation textile printing methods during my previous work experience.”

The purchase of a Mimaki JV4 plotter, one of the first to be installed in Italy, marked the beginning of Digitak’s adventure. “To start the business, I needed a printing system that could operate with dispersed inks to print on polyester and I found the JV4 to be the best option,” explains Taccani. “It was an excellent decision, because I used these plotters to build the company and its success.”

The first Mimaki plotter was in fact followed by a second and a third. When it bought the fifth, the company moved to an industrial unit in Tradate (Varese) – Digitak’s current site – which now houses around fifteen Mimaki JV33 plotters, in addition to three Mimaki TS500-1800 wide-format sublimation printers, and a Mimaki TS300P-1800 high-speed sublimation printer. This Mimaki powered production facility – which is one of the company’s core strengths – was recently expanded with the addition of a Mimaki TX300P-1800B belt-type hybrid printing system, together with a Mimaki TR300-1850C textile coater and a Mimaki Tiger-1800.

“Naturally, over the years, we have also tested printing systems from other suppliers, but we have always returned to Mimaki. With high fashion as our key market, we need to guarantee our customers the highest levels of quality and, to date, we have never found solutions that beat the quality of this Japanese brand’s technology.”

According to Taccani, the difference lies in the “calligraphy” of Mimaki’s machines, that is the line of the ink on the fabric: “Unlike its competitors, Mimaki has focused on the ‘waveforms’, i.e. the electronics associated with the print heads. This attention paid to the way the ink jet is managed from the print head has allowed Mimaki to achieve unparalleled levels of accuracy, an aspect that has given my company a clear competitive edge.”

Moreover, at Digitak, quality comes before quantity: “We prefer to dedicate an extra day to production to guarantee the customer a final product that fully meets requirements and expectations. Mimaki’s technology not only suits this business model bult on top quality, but it crucially enables it.”

Operational and creative flexibility

Digitak currently prints around 2,000 linear metres of fabric per day. Its portfolio ranges from clothing and scarves, to beach and swimwear, with related personalised accessories, to sportswear, with technical properties such as breathability, comfort, resistance to external agents. The company have even added customised outdoor furniture to their offering of diverse and creative products.
The company’s machines operate continuously, 24/7. During the day, the machines are mainly used to develop and produce samples and colour proofs, while the actual production is carried out at night. “Thanks to our technology, we have developed an extraordinary operational flexibility. The fact that we have so many plotters allows us to work on multiple designs at the same time and to launch projects that are also very different from one another,” explains Taccani. “There are also some other crucial factors that have contributed, and continue to contribute, to increasing our production efficiency. The reliability of Mimaki’s solutions and the remote monitoring option offered is key. Once the standard start-up monitoring has been carried out and the machines are found to be printing correctly, we can let them work overnight without an operator. This is a great benefit for people who, like us, manage such a large and diverse fleet of machines.”

Digitak takes the same approach to customer service. Faced with an increasingly demanding market in terms of creativity, precision and completeness of service, the company wants to guarantee flexibility and customisation. “We decided to set up a department dedicated to the pre-press stage, in charge of preparing and checking the files supplied by customers. Seldom do our teams not need to do some editing of the files supplied, even if it’s only to make small changes that are essential for the print document to be as suitable as possible and to achieve the best final result.”

Technologies of the future

With a view to further enhancing production and customer service, Taccani has chosen to take on a new challenge, switching things up with some of the most recent investments.

While maintaining the focus on dye sublimation printing, Taccani has focused on technological diversification by installing a direct-to-fabric digital printing line. This consists of a Mimaki TX300P-1800B printing system with pigment inks and a TR300-1850C coater from Mimaki’s TR series. “The market continues to evolve and now requires even more flexibility regarding both processes and the fabrics supplied. This means that great opportunities exist for a print shop capable of simultaneously producing the same design – with minimal colour adjustment – on different fabrics, guaranteeing similar and accurate results. And this is precisely the path we are taking,” says Taccani. “Why have we opted for Mimaki again? Well, I had an opportunity to try out their new pigment inks and I immediately realised that they are a generation ahead of the other pigments available on the market. The cyan is very clean, the black is deep and there is a very interesting fullness of colour, suitable not only for furnishings, but also for other applications in the clothing sector.”

With its pigment inks, the new direct-to-fabric printing line allows Digitak to explore other related market segments. Thanks to the innovative automatic belt system, the TX300P-1800B guarantees good productivity and high-quality results. A standard of quality that is also boosted by the TR300-1850C fabric pre-treatment system: “This coater is essential for ensuring the best possible preparation of fabrics for printing. In fact, we are able to treat fabrics to make them suitable for the type of print they are intended for, sanitise them for specific applications and, in some cases, even dye them, with excellent quality.”

According to Taccani, another beneficial factor of direct-to-fabric pigment printing technology is the eco-sustainability of the process and its lower environmental impact. “We are proud to be able to offer our customers excellent printing results using little water and printing in ‘green mode’, with both the technologies we have available. I consider them winning technologies for the future, as both dye sublimation printing and direct-to-fabric printing with pigment inks use little water while mainly requiring the use of energy. Therefore, if you use renewable energy, then you’re done.”

Digitak’s other trump card is the Tiger-1800 installed in 2019. With this industrial printing system, the company aims to increase production volumes while maintaining its high-quality standards and further optimising costs. “We are excited to have these promising technologies available to us in-house. We are currently experimenting with these solutions, testing new opportunities and evaluating which paths to take to stay ahead of the game,” concludes Taccani.

On February 10, 2020, the Supervisory Board of SGL Carbon SE appointed Dr. Torsten Derr as Chief Executive Officer of SGL Carbon SE for the duration of five years effective July 1, 2020. In agreement with his current employer, Dr. Derr will now take up his position as CEO of SGL Carbon one month earlier on June 1, 2020. The Supervisory Board very much welcomes this development in view of the challenges that these extraordinary times pose.  

Since 2016, Dr. Torsten Derr is holding the position of Managing Director of SALTIGO GmbH, a subsidiary of LANXESS AG. Following his master degree and attainment of his PhD in chemistry at the University of Bremen, Dr. Derr began his professional career 1997 at Bayer AG, and since 2003 at LANXESS AG, where he was Vice President for Plastic Intermediates, Head of the Business Units Material Protection Products and EPDM-Elastomers, as well as holding various other management functions, amongst others as Head of Commercial & Supply Chain Excellence & Chief Commercial Officer of LANXESS AG.

All proposals submitted by the Board of Directors were approved at the Annual General Meeting of Autoneum Holding Ltd. In view of the net loss in the 2019 financial year, a dis-tinct majority of shareholders agreed to the proposal to forgo a dividend payment.

In consideration of COVID-19 Ordinance 2 of the Federal Council, no shareholders were admitted to physically attend the Annual General Meeting on site. The Company therefore requested the shareholders in advance to transfer their votes to the independent voting proxy. He represented 59.8% of the total 4 672 363 shares issued.

The shareholders approved the 2019 Annual Report including the consolidated and annual finan-cial statements. Given the significant net loss in the 2019 financial year shareholders approved the proposal submitted by the Board of Directors to forgo a dividend. Hans-Peter Schwald, Chairman of the Board of Directors, stressed: “Autoneum aims to distribute at least 30% of net profit attributable to Autoneum shareholders as dividends. Unfortunately, Autoneum did not generate a profit in 2019, mainly due to impairments. This development is unacceptable for both, the Group Executive Board and the Board of Directors, and together with the employees we are doing every-thing possible to get back on the road to success. Nevertheless, the Board of Directors and the Group Management will continue to adhere to their long-standing dividend policy and thus ensure that shareholders participate appropriately in the Company's success.”

Chairman Hans-Peter Schwald and the other members of the Board of Directors, Rainer Schmückle, Norbert Indlekofer, Michael Pieper, This E. Schneider, Peter Spuhler and Ferdinand Stutz, were confirmed in office. This E. Schneider, Hans-Peter Schwald and Ferdinand Stutz were also re-elected to the Compensation Committee. In addition, a large majority of the shareholders of Autoneum Holding Ltd gave formal discharge to all members of the Board of Directors and the Group Executive Board.

The consultative vote on the 2019 remuneration report was approved by 89.2%. The proposals for the remuneration of the Board of Directors and the Group Executive Board for the 2021 financial year as well as the other proposals were also approved by a large majority.

As a member of the Swiss Textile Machinery Association, Saurer will give visitors the opportunity to learn about the company and to gain an overview of its spinning and embroidery offerings at ITME Africa from 14 to 16 February 2020. At the exhibition, visitors will learn more about Saurer’s extensive spinning offerings, which enable customers to process a wide range of fibres depending on their needs using ring-, worsted- and compact- or rotor-spinning technologies. Autoairo, the group’s new double-sided air-spinning machine, will also be introduced to prospective clients.

• Porcher Industries presents the future of quiet and clean mobility solutions with materials that offer high-performance thermal and acoustical insulation.

The 5th Edition of the Annual Automotive Exhaust Systems Summit, to be held in Dusseldorf on November 28th-29th, will see Porcher Industries showcase the market’s most complete range of high performance thermal and acoustical insulation products.

With a key strategic thrust targeting quiet and clean mobility by developing new insulation applications, Porcher Industries’ range of textiles meet the demands and requirements of the Automotive, Aerospace and other transport sectors by delivering unsurpassed levels of thermal and acoustical management.

On display the group will showcase its Techmat®, SilcoSoft® and ThermoShield® materials – all highly functional non-woven textiles that can be found in key areas of both the hot and cold ends of vehicle exhaust systems.

Produced from 100% non-respirable fibres, these binder free non-wovens are safe to handle and can be tailored to provide application specific thermal insulation and heat shields at temperatures ranging from 650˚C to 1150˚C (1200°F to 2100°F).

Porcher Industries is able to deliver its Techmat®, SilcoSoft® and ThermoShield® materials in a wide range of formats from roll goods, flat or formed shapes through to sub-assemblies and finished parts that combine metallic layers with their insulation materials.

Porcher Industries’ thermal and acoustical insulation solutions will also be on show in Dusseldorf: technical textiles that blend chemistry and fibre processing technology to produce a powerful range of non-woven and glass mat thermoplastics (GMT) materials that can be tailored to a customer’s specific acoustical and thermal insulation requirements.

In addition, Andreas Stoeferle, Technical Support Engineer, EMEA, Porcher Industries, will present a detailed view of the group’s expertise in high performance insulations, their global reach, products and delivery formats on the opening day of the conference.

“As one of the leading manufacturers of specialist technical textiles within the Automotive sector, we have responded to demand and placed significant development time and resource into developing our range of thermal and acoustical material solutions for Automotive and Aerospace.” commented Pierre-Yves Quéfélec, Global Aerospace & Automotive BU Head.

Joint booth to host demonstrations of Apollo wicketer and Meridian laser anilox cleaner
Hudson-Sharp and Paper Converting Machine Company (PCMC), both part of Barry-Wehmiller, will be showcasing equipment at K2019 (hall 3, B16), held 16 to 23 October, 2019, in Düsseldorf, Germany. Hudson-Sharp joined PCMC as of October 1, 2019, and attendees may visit the companies’ joint booth during the show to view live demonstrations of two innovative machines.

Hudson-Sharp will be demonstrating its brand-new high-speed Apollo wicketer, with quick changeover features, automation, enhanced ergonomics and user interface, and increased output speeds. The Apollo’s smart features will enable customers to reduce scrap rates and collect improvement metrics to assist in production decisions.

PCMC will be showcasing its Meridian laser anilox cleaner, which quickly deep-cleans anilox cells with a laser to remove deposited particles inside of the cells. This cleaning technology extends the life of anilox rolls and does not require any chemicals, sodium bicarbonate, polymer beads, water or detergents—making it a sustainable technology with a very low environmental impact. PCMC’s newest Meridian models include updated controls and a new internal traversing vacuum system.

Berlin - 200 exhibitors, around 1,000 visitors and over 20 speakers from Germany and abroad – the ATSG textile fair premiered in Berlin from 11 to 13 September 2019 brought together exhibitors, speakers and trade visitors from all over the world. Jason Prescott, CEO of JP Communications, said he was satisfied with the event at the Estrel Conference Center: "The first step has been taken, now we will establish the ATSG as an important event of the Berlin fashion and textile world".

The ATSG was the first fair of its kind in Germany. "There are many fashion trade fairs for sale from wholesale to retail. Berlin has so far lacked an event for companies of all sizes, including micro-brands and small fashion labels," continues Jason Prescott. The exhibited product categories included fabrics, technical clothing, mixed and knitted fabrics, home textiles, leather, natural and synthetic fibres, readymade goods and fashion accessories. Visitors to major European fashion brands as well as small, independent brands from the Berlin fashion scene were able to take a close look at raw materials and finished garments and discuss their ideas personally with the exhibitors. In parallel, China Textile Brand Show (Berlin), sponsored by Chinese Ministry of Commerce (MOFCOM), made its debut bringing in more than 150 superb Chinese manufacturers with their best collections for Germany and EU market.

Opening Ceremony, Lectures and Fashion Show

The ATSG was opened by Chinese government representatives and international association delegates. More than 20 lectures on the three days provided the latest impulses for thought and discussion. In their lectures and panel discussions, speakers from all over the world presented current positions on topics such as "All China? Or is there more to it?", "Application examples of artificial intelligence in the fashion industry", "Optimal logistics concepts for Europe", or "The importance of sustainability in the European fashion industry".

Wilson Zhu, COO at Li & Fung, one of the world's largest trading houses based in Hong Kong, explained in his keynote speech his view on the digitization of global supply chains: "From raw materials in the textile factory to consumer tracking: In retail, every step of the value chain is determined by digitization.

Companies need to be close to consumers and their supply chains must enable a seamless flow of data and information from start to finish". Customers and their requirements have also changed: "They want to know about origin, recyclability and production standards and use their information to adjust their purchasing behavior accordingly.” Other speakers included Jeff Streader of the brand investment platform Go Global and Salman Khokhar of Brand Lab Kollective Moda. The fashion show on the second day featured creations by local Berlin labels (Damur, Danny Reinke, Aline Celi, Yoona Tech) as well as Asian brands exhibiting at ATSG.

Successful kick-off

Exhibition organiser Jason Prescott draws a positive balance: "Looking back on the three days, I am very proud of what went well. Which has been confirmed for us: We're on an exciting path, have taken our first steps here in Berlin and will continue to develop the exhibition." The creators of ATSG 2019 are taking ideas for the year 2020 with them, especially from the many intensive discussions with exhibitors and visitors: "The ATSG has offered visitors and exhibitors a unique opportunity to identify new growth strategies, look around for market partners, learn from each other and establish networks. We are very pleased that the concept was used here in Berlin," concludes Chase Vance, Director of JP Communications.

• Committed To Making a Better World

EUROBIKE, the world’s leading trade fair for the cycling industry, will include ROICA™ smart innovations into the race. Cycle retailers, brands and manufacturers will discover ROICA™ premium stretch that provides comfort and movement as it energizes.

Spearheading the premium stretch market, ROICA™ partners’ materials elevate new standards for high-tech performance that can enhance cycling products to compete responsibly. ROICA™ partners excite you as they show a fantastic range of stretch essentials for cycling clothing, gear, and apparel that offer solid performance perks.

Most importantly, visit ROICA™ partners at EUROBIKE to learn about their ongoing commitment to responsible innovation and creativity by experiencing their advanced responsible developments made with the ROICA Eco-SmartTM Family.

The ROICA Eco-Smart™ family offers two responsible made yarns with outstanding stretch performances that give free rein to designers’ creativity and guarantees the highest quality while complying to the most-cutting edge sustainable standards.

• The ROICA™ EF– GRS (Global Recycled Standard) certified - is made with 58% of pre-consumer recycled content. GRS guarantees its sustainable mission with a certification by the influential Textile Exchange*, one of the most known and recognized global players in the market.
• The ROICA™ V550   Indeed, it proudly breaks down without releasing harmful substance under the testing environment according to Hohenstein Environmental Compatibility certification. Made and engineered by Asahi Kasei R&D team, and produced in ROICA™ German plant only, the yarn offers additional and relevant circular economy advantages linked to material health as proved by a Gold Level Material Health Certificate by the Cradle to Cradle Product Innovation Institute for a safe and biological end of life cycle.

Witness ROICA™ partners as leaders in high-tech performance fabrics for the world of sports for riders that want to stand out. See, feel, imagine and learn why choosing ROICA™ is a winning decision. View the unbeatable collection of well-constructed fabric

• M.I.T.I. SpA (IT), Hall/Stand No. A7-215 partner with ROICA™ since the very beginning, develops and creates from more than 85 years, innovative stretch warp knitted fabrics for high performance sports.
• Payen – ESF (FR), Hall/Stand No. A7 / A7-219, committed to develop durable performant solutions chooses ROICA Resistance™ range of high-tech protection stretch functions.
• Piave Maitex (IT), Hall/Stand No. A7-123 presents AGAIN, the new smart and technically advanced line able to balance performances and sustainable features, formed of highly performing jerseys. Two premium sustainable ingredients have been involved for the creation of AGAIN: Global Recycled Standard (GRS) owned by Textile Exchange - premium stretch fiber ROICA™ EF and perPETual high quality sustainable polyester born from a cost-effective process that reverses engineer consumer waste PET bottles.
• SITIP SpA (IT), Hall/Stand No. A7-213 creates high-tech innovative sports fabrics that are made in Italy including BeHot fabric constructed with ROICA™, providing a new dimension to active performance.
• Sportwear Argentona S.A. (ES) Hall/Stand No. A7-322 based in Spain, these leaders in high-tech tech, optimal performance sports fabrics create specialized structures for all facets of sports including high comfort, elastic and performance.

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, will be showcasing its Meridian laser anilox cleaner at Labelexpo Europe (booth 11C36), held 24 to 27 Sept., 2019, in Brussels. This is the first time the Meridian will be showcased with live demonstrations at this show.

Attendees may visit the PCMC booth anytime to watch as the Meridian quickly deep-cleans anilox cells by using a laser to remove deposited particles inside of the cells. This cleaning technology extends the life of anilox rolls and does not require any chemicals, sodium bicarbonate, polymer beads, water or detergents—making it a sustainable cleaning technology with a very low environmental impact. PCMC’s newest Meridian models are designed for the narrow web market and include a new internal traversing vacuum system.

“We’re very excited to welcome people into our booth to view the new innovations on our Meridian firsthand,” said Rodney Pennings, PCMC’s Printing, Coating and Laminating Sales Director. “I think they’ll be impressed by its technology, speed and effectiveness.”

Garmon Chemicals confirms itself as a pioneer in chemistry specifically applied to garment treatment, at the forefront in terms of product research and active promotion on the sustainable issue. The Dutch show is the ideal stage to present a preview of the latest innovation born out of Garmon’s volcanic R&D department. It is Avol Lime, the revolutionary and ecologicallyadvanced neutralizing agent. Used in combination with Avol Oxy White (the bleaching agent that represents the safe alternative to potassium permanganate), it allows to obtain a fully safe and sustainable bleaching process.

white&green: solutions for eco-bleaching
white&green is the ultimate solution to obtain a safe and sustainable jeans discoloration process. The new line provides two avant-garde solutions: two highly performant products, both representing a safe and conscious alternative.
Two souls presenting unique characteristics:

The “white” soul

• the hightest level of whiteness
• superior bright shades
• stylish vintage looks
• extraordinary contrasts

The “green” soul

• safe alternative to dangerous products
• significant energy savings
• classified in ZDHC gateway (from level 1)
• greenofchange® approved