From the Sector

INDA, the Association of the Nonwoven Fabrics Industry, announced three recipients for the INDA Lifetime Service Award and Lifetime Technical Achievement Awards. David Powling, Paul Latten, and Arnold Wilkie are being recognized for their key contributions to the advancement of the nonwovens industry and INDA.

David Powling and Paul Latten will receive their awards at the World of Wipes® (WOW) International Conference, June 18th beginning at 4:30 pm
Arnold Wilkie will receive his award at the RISE® Conference, October 1st at 4:30 pm.

The Award recipients are:

David Powling
David Powling has worked for Kimberly-Clark Corporation for nearly 25 years and has been a contributor to the Wipes Task Force and Technical Committees at INDA and EDANA for over 15 years. Powling served as Chairman of the INDA Wipes Task Force from 2009-2013. His work on these committees include developing the first and second edition of the Flushability Guidance Document (GD) and he was later instrumental in the roll out of the third and fourth edition GDs. Throughout this time, Powling coordinated activities with Kimberly-Clark Corporation to provide critical supporting data, as these flushability test protocols were developed.

Powling has been actively involved in collection studies where he was key in framing the work packages of those studies, collating and analyzing the data, and drafting reports. These collection studies include: Moraga, CA (advisor); Maine – Part #1 and Part #2 (hands-on); Jacksonville (hands-on); and the Northern and Southern California studies in 2023, which combined, was the largest study to date. Powling led the charge in the California study and was personally involved in identifying 1,745 samples.

Powling has been a key technical contributor to the INDA Government Relation efforts that has resulted in labelling regulations in multiple U.S. states. He has also been an active participant in efforts to develop an ISO standard for flushable products.  In this effort, he was a test method sub-team leader during the preparation of the proposed ISO standard responsible for organizing appendices of existing flushability methodologies. Additionally, Powling has been awarded, or has pending, 25+ U.S. patents, including many covering the development of dispersible wet wipes.

Paul Latten
Paul Latten has been an active member of the nonwoven and fiber industries for over 35 years. Most recently he has led innovation at Southeast Nonwovens, commercializing more than 75 new nonwoven products per year. Prior to joining Southeast Nonwovens, Latten held senior leadership positions with Basofil, Consolidated Fibers, Invista, and KoSa (and Trevira and Hoechst Celanese precursors to KoSa.)

Latten has a successful career of reinvigorating company R&D efforts by instilling a focus on customer-centric innovation. He is an inventor of record for a number of patents and pending applications. Latten has given numerous presentations on innovative nonwoven materials, at events such as INDA’s World of Wipes® (WOW) International Conference, RISE® (Research, Innovation & Science for Engineered Fabrics), the VISION International Conference, and the Converting and Bonding (CAB) Conference.

His recent innovations have been diverse in scope and include nonwovens for use in hydrogen fuel cells, moisture detection media, proprietary wipe designs, and natural fiber-based packaging. Aside from new fiber and nonwoven products, Latten has championed process innovation that has resulted in tangible output gains that broadened the market opportunity for his current and prior companies.

Latten’s portfolio of innovations has spanned across the nonwoven markets, often involving wetlaid and drylaid nonwovens. These include materials for moisture detection, synthetic papers, fuel cell cathodes, protective covers for treats, melamine nonwovens for surface treatment, and the development of binder fibers. His work also touched upon disposable hygiene applications entailing dry-laid web containing hollow synthetic fibers to improve absorbent core fluid uptake.

Latten has been a board member of INDA for multiple terms and served as Chairman in 2008-2010. Additionally, he has contributed to many INDA conference planning committees, helping drive the success of these events.

Arnold Wilkie
Arnold Wilkie has a distinguished career in advancing yarn, fiber, and nonwoven technologies since 1970. Since 1988, he has been President and Owner of Hills, Inc. where he has sustained their innovative culture. Wilkie has over 40 patents and applications covering yarns, bicomponent fibers, ultra-fine fibers, nanofibers, dissolvable filaments, meltblown nonwovens, and polymer processing innovations. He established Hills as a leading innovator in bicomponent fiber nonwovens and in the equipment to produce these materials. During Wilkie’s time leading Hills, their pilot capabilities have become well-known and highly regarded for enabling material innovations.

Many of his patents pertain to the development of equipment solutions that enable the production of complex bi- and multi-component fiber structures. These solutions include the method of forming a continuous filament spun-laid web, the method and apparatus for producing polymer fibers and fabrics including multiple polymer components, the method and apparatus for controlling airflow in a fiber extrusion system, and controlling the dissolution of dissolvable polymer components in plural component fibers.

Arnold Wilkie, President, Hills, Inc., earned his bachelor’s degree in Mechanical Engineering from the University of Tennessee and an MBA from the University of West Florida. He is a licensed Professional Engineer in Florida, and has been engaged in the synthetic fibers industry since 1970. The first 17 years were with the Monsanto Company, where he held positions in Fiber Process Engineering, Fiber Product R&D, and Product Management. Since 1988, he has been a majority Owner and President of Hills, Inc., a 52-year-old company located in West Melbourne, Florida, specializing in the development, manufacture, and supply of advanced custom fiber extrusion equipment. Wilkie has been involved with and supported The Nonwovens Institute, since its founding in 1991 as the Nonwovens Cooperative Research Center (NCRC), with Hills joining as a Member in 2001

INDA, The Association of the Nonwoven Fabrics Industry, announces that Director of Government Affairs Wes Fisher was named a 2023 Top Lobbyist by the National Institute for Lobbying & Ethics (NILE). The list includes professionals with legislative success in 2023, have been innovative in their field, are held in high regard by their peers, give back to their community through charity or pro bono work, and adhere to the highest ethical standards.

Fisher joined INDA in 2022, he previously held senior government affairs positions at the Pet Advocacy Network and the National Automatic Merchandising Association. His work at INDA has included interfacing with lawmakers, regulators, and stakeholders at the state, local, federal, and international levels and participating in UN negotiations regarding the ongoing Global Plastics Treaty. He serves on the board of directors of the Washington Area State Relations Group (WASRG) and in 2022 was appointed by the Governor of Virginia to the Virginia Rare Disease Council.

• INDA, the Association of the Nonwoven Fabrics Industry, today announced six new board members and its 2022 slate of officers to guide the success of the nonwovens industry and its members.

Elected by the INDA membership to three-year terms that began on March 1, the new board members bring a high level of diverse expertise and insight to the management of the association as it moves forward with its vibrant growth.

“I am delighted to welcome such a strong group of new board members who bring deep industry knowledge and insights to provide strategic stewardship for our association,” said Dave Rousse, INDA President. “We look forward to working with them to advance INDA’s new value proposition to enhance our industry’s leadership position and deliver greater value to our members.”

The new board members are from global leaders Lenzing Group, Bast Fibre Technologies, Reifenhauser Reicofil, Rockline Industries, Hollingsworth & Vose Company and Principle Business Enterprises.  

INDA also announced Bryan Haynes, Ph.D., R&E Technical Director Kimberly-Clark, has been named Chairman of the Board. Barbara Lawless, Vice President Sales and Marketing, Medical Products, Precision Fabrics Group, Inc. has been elected Vice Chair of Finance, and Richard Altice, President and CEO of NatureWorks, has been appointed to INDA’s Executive Committee.

The new board members are:

• Jürgen Eizinger, Senior Commercial Director, Nonwovens Business EU/AM/MEA, Lenzing Group

Eizinger has nearly 20 years of fiber industry experience. He has been with the Lenzing Group since 2001 and most recently was Vice President of the Global Nonwoven Business. He has worked at multiple locations around the world and held various commercial, engineering and technical customer services roles.

• Jim Posa, President and General Manager, Bast Fibre Technologies, Inc.

Posa has 30-plus years of nonwovens experience and has successfully led businesses from startups to some of the largest companies in the nonwovens market. He has developed and implemented strategic business, development, operational and acquisition growth plans. His teams have worked with businesses focused on most of the major end use markets such as hygiene, wipes, filtration, medical and industrial. As a senior executive, Posa has led global businesses at Fiberweb, BP/Amoco, CEO of a Nisseki/Amoco joint venture (ANCI), Lydall, and Nitto America. A long-time INDA supporter, he has previously served on committees and as a Board member.

• Markus Mueller – Sales Director and Board Member, Reifenhauser Reicofil

Mueller brings to the INDA Board 35 years of experience with Reifenhauser in the nonwovens and film industries. His experience has included roles as PLC Engineer, Commissioning Engineer, Project Manager and Sales Manager. Mueller has extensive knowledge of the global hygiene and medical nonwovens markets. He holds a degree in Electrical Engineering from the Technical University of Cologne.

• Matt Koele, Director of Global Materials Development, Rockline Industries

Koele is based at Rockline’s headquarters in Sheboygan, WI.  Before joining Rockline in 2012, he has held several business and Research and Development (R&D) leadership positions at SC Johnson and Kimberly-Clark Corporation. An inventor with over 10 patents, Koele is a magna cum laude graduate of Michigan Technological University in Chemical Engineering.

• Mike Clark, President, Filtration Solutions, Hollingsworth & Vose Company

Clark joined H&V in 2003 and has held numerous leadership positions in the U.S. and Germany. He previously served as the President of the High Efficiency and Specialty Filtration Division from 2009 to 2020.  Before joining H&V, Clark was a strategy consultant for eight years working with Fortune 100 manufacturing companies. He holds a bachelor’s in Mechanical Engineering from Rensselaer Polytechnic Institute.

• Andrew Stocking, Ph.D., President and CEO, Principle Business Enterprises, Inc. (PBE)

Stocking joined PBE in 2017 after a career in engineering, technology, nonprofits and government. He was named President and COO in 2018, then President and CEO in 2020, becoming the third-generation leader of the family-owned organization. He previously held roles in the private sector and within federal government offices, including the Department of Energy and Congressional Budget Office. He earned a BS in Chemical Engineering and an MS in Civil Engineering from Stanford University, and a Ph.D. in Resource Economics from the University of Maryland.

The 21-member board is comprised of elected Board Officers. One-third of the entire Board is elected each year for a three-year term by a majority vote of INDA’s general membership. INDA’s Executive Committee, empowered to act on behalf of the Board between meetings, consists of the Board Officers plus four appointees.

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement today welcoming President Biden’s action plan and COVID-19 response, accompanied by a series of executive orders, including an order signed today to strengthen U.S. supply chains by directing federal agencies to use the Defense Production Act (DPA) to address shortages of personal protective equipment (PPE) and related vaccine supplies.

“We are closely reviewing President Biden’s national strategic plan to confront the pandemic and welcome the executive order signed today to strengthen our supply chains by directing all federal agencies to use the Defense Production Act to address shortages of personal protective equipment, vaccine supplies and essential products. These are important steps that will help ramp up critical manufacturing of these essential PPE products and other critically needed supplies like tests and vaccines.”

American manufacturers have been at the forefront of the effort to build a domestic PPE supply chain since the onset of the COVID-19 pandemic. The U.S. textile industry retooled production and operations virtually overnight, producing millions of face masks, isolation gowns, testing swabs and other critical medical textiles.

The industry is dedicated to making significant investments in automated equipment for PPE, but the industry needs long-term, multiyear contracts to help realize that investment.

The deployment of DPA is one of the critical tools that will help incentivize investment in equipment, propel the hiring of U.S. workers and expand these critical production chains.

Since its inception, the DPA has been utilized by the Department of Defense to make critical investments in domestic textile manufacturing infrastructure and capacity, creating private-public partnerships through the government’s capital investments under the DPA and guaranteeing purchases through long-term contracts.  

NCTO applaud President Biden’s action and anticipate further steps including a reported order that will seek to strengthen government procurement of U.S. products in the coming days. NCTO appreciate President Biden outlining the “National Strategy for the COVID-19 Response and Pandemic Preparedness” a series of actions and steps the administration will undertake to deploy and manufacture the vaccine and other essential products.

Amid the rapid spread of COVID-19 around the world, DyStar’s global operations continue to adapt to the development of the situation and to mitigate potential risks or impacts across the business. While the trajectory is unknown, DyStar is guided by recommendations from the World Health Organization and the local government authorities, to proactively address situations that could possibly affect our people and customers. This is to ensure that we have effective plans and standard procedures to minimize the disruption of our global operations.

Business Continuity Plan (BCP)
As a globally operating company, each of our operating sites, manufacturing plants, offices have a Business Continuity Plan (BCP) in place to sustain our operations and the supply chains we serve. The BCP, owned by our Business Continuity Management Team, provides clear guidance for all local operations, such as Administration, Customer Services, Finance, Logistics Services, Sales and Technical Support as well as Procurement, to enable all functions to continue operating effectively to serve our customers, distributors and agents.

Emergency Response Plan (ERP)
DyStar’s manufacturing sites are also installed with an Emergency Response Procedure to cover all emergency circumstances, including the COVID-19 pandemic disease. The goal of the emergency response procedure is to mitigate the impact of such events on people and the environment, ensuring operational readiness of the site during an emergency.

As the world adjusts to the impact of the COVID-19 pandemic, DyStar will continue to monitor the situation very closely and will provide updates that adapt to the changing situation. We remain committed to provide our customers with excellent service and to work closely with all our partners throughout this difficult period.

Brown Wrote to President Outlining Critical Steps White House can Take Now to Address Shortage of Personal Protective Equipment

 U.S. Sen. Sherrod Brown (D-OH) hosted a news conference call to discuss his plan for addressing the shortage of personal protective equipment (PPE) needed by healthcare workers on the frontline of keeping Americans healthy and safe during the coronavirus pandemic.

This weekend, Brown wrote to President Trump outlining several steps the Administration should take immediately to address the shortage and ramp up manufacturing of these critical medical supplies.

In his plan and in his letter to the President, Brown lists nine steps the Administration could take immediately, including:

1. Designate a government official who can serve as a point person responsible for coordination the acquisition and development of PPE, medical devices, and other supplies necessary to fight the coronavirus pandemic. 
2. Establish a PPE and medical device assessment and database to monitor the supply and anticipated needs for PPE, ventilators, diagnostic test kits, and other needed medical supplies to respond to the coronavirus pandemic. 
3. Publish a list of PPE, medical device, and general medical supply needs to respond to the coronavirus pandemic. 
4. Establish a hotline capable of handling significant call capacity that will provide U.S. producers centralized information about the results of the national assessment and the current need for PPE, devices, and other health care supplies. 
5. Provide immediate funding to manufacturers to purchase equipment, retool machinery, hire additional workers, and cover any other expenses needed to increase production of PPE and necessary medical devices and supplies.
6. Streamline contract and certification procedures to ensure production and delivery of materials are not delayed due to paperwork constraints.
7. Provide critical protections for workers who are making PPE, medical devices, and necessary supplies to receive a waiver from any shelter-in-place requirements to allow workers to volunteer to go to work in these critical industries. 
8. Provide purchase guarantees and delivery assistance of product to the communities and health care facilities that need the products most. 
9. Support companies that have the capacity to sterilize reusable equipment to alleviate the existing PPE shortage. 

In his plan, Brown also pointed out important legislative actions that will help ramp up production of these critical supplies, including expanding the strategic national stockpile authority, substantially increasing Defense Production Act funding and strengthening domestic preferences.

Berlin - 200 exhibitors, around 1,000 visitors and over 20 speakers from Germany and abroad – the ATSG textile fair premiered in Berlin from 11 to 13 September 2019 brought together exhibitors, speakers and trade visitors from all over the world. Jason Prescott, CEO of JP Communications, said he was satisfied with the event at the Estrel Conference Center: "The first step has been taken, now we will establish the ATSG as an important event of the Berlin fashion and textile world".

The ATSG was the first fair of its kind in Germany. "There are many fashion trade fairs for sale from wholesale to retail. Berlin has so far lacked an event for companies of all sizes, including micro-brands and small fashion labels," continues Jason Prescott. The exhibited product categories included fabrics, technical clothing, mixed and knitted fabrics, home textiles, leather, natural and synthetic fibres, readymade goods and fashion accessories. Visitors to major European fashion brands as well as small, independent brands from the Berlin fashion scene were able to take a close look at raw materials and finished garments and discuss their ideas personally with the exhibitors. In parallel, China Textile Brand Show (Berlin), sponsored by Chinese Ministry of Commerce (MOFCOM), made its debut bringing in more than 150 superb Chinese manufacturers with their best collections for Germany and EU market.

Opening Ceremony, Lectures and Fashion Show

The ATSG was opened by Chinese government representatives and international association delegates. More than 20 lectures on the three days provided the latest impulses for thought and discussion. In their lectures and panel discussions, speakers from all over the world presented current positions on topics such as "All China? Or is there more to it?", "Application examples of artificial intelligence in the fashion industry", "Optimal logistics concepts for Europe", or "The importance of sustainability in the European fashion industry".

Wilson Zhu, COO at Li & Fung, one of the world's largest trading houses based in Hong Kong, explained in his keynote speech his view on the digitization of global supply chains: "From raw materials in the textile factory to consumer tracking: In retail, every step of the value chain is determined by digitization.

Companies need to be close to consumers and their supply chains must enable a seamless flow of data and information from start to finish". Customers and their requirements have also changed: "They want to know about origin, recyclability and production standards and use their information to adjust their purchasing behavior accordingly.” Other speakers included Jeff Streader of the brand investment platform Go Global and Salman Khokhar of Brand Lab Kollective Moda. The fashion show on the second day featured creations by local Berlin labels (Damur, Danny Reinke, Aline Celi, Yoona Tech) as well as Asian brands exhibiting at ATSG.

Successful kick-off

Exhibition organiser Jason Prescott draws a positive balance: "Looking back on the three days, I am very proud of what went well. Which has been confirmed for us: We're on an exciting path, have taken our first steps here in Berlin and will continue to develop the exhibition." The creators of ATSG 2019 are taking ideas for the year 2020 with them, especially from the many intensive discussions with exhibitors and visitors: "The ATSG has offered visitors and exhibitors a unique opportunity to identify new growth strategies, look around for market partners, learn from each other and establish networks. We are very pleased that the concept was used here in Berlin," concludes Chase Vance, Director of JP Communications.