From the Sector

Finishing machinery specialist Monforts will exhibit at the upcoming Febratex textile machinery exhibition taking place in Blumenau, Brazil, from August 20-23, along with Uniferro, its new regional partner.

This new alliance follows the retirement of Herbert Erdmann of the service agency Euro Texteis, who has worked with Monforts over more than 30 years to secure a leading position in the region for Montex stenter dryers, Thermex dyeing ranges and associated finishing technology.

With offices in Sao Paulo and Ceara and sub-agents across Brazil, Uniferro has been active in the textile industry for over 50 years.

coaTTex
At Febratex, Monforts will introduce its latest coaTTex coating unit exclusively dedicated to air knife and knife-over-roller coating. For single-sided application with paste or foam, the versatile coater is suitable for both incorporation into existing finishing ranges as well as installation with new Monforts Montex stenter systems.

A wide range of coatings can be applied to fabrics for providing functions such as waterproofing, liquid and gas protection and breathability, in addition to foam lamination and black-out coating.

Denim hub
Brazil remains a buoyant hub for textile manufacturing with a particular stength in the denim dyeing and finishing sector and many Monforts Thermex hotflue dyeing systems are already operational in the region, reaping the benefits of the Econtrol® process.

Econtrol® is a continuous process for the dyeing of woven cotton and cellulosic fabrics, especially denim, in which reactive dyestuffs are fixed into the fabric in a one-step dyeing and drying process with a controlled combination of steam and air. The entire pad-dry process takes just two-to-three minutes.

“Differentiation is the key in the highly-competitive denim fabrics industry, whether through the successful incorporation of new fibres, accommodating new fabric constructions or exploring the many options for how to treat them at the finishing stage, to gain a market advantage,” says says Monforts Regional Sales Manager Achim Gesser. “Our lines allow users to be extremely versatile and respond quickly to market demand, while also allowing very short production runs.”

Because finishing is a particularly energy-intensive part of the textile production chain, it is exactly where convincing results can be achieved, he adds, and Monforts has developed a wide range of energy-saving. These included a range of heat recovery systems, such as the Universal Energy Tower and the ECO Booster. Both can also be retrofitted to existing ranges to make production more resource-efficient and economical, yet without having to invest in a new machine.

“Energy costs tend to be high in Brazil and can account for up to 70% of production costs for our customers, so there is great demand for ways of saving money,” says Gesser. “Cutting energy usage also helps in terms of global warming and reducing carbon footprint, of course, so these latest technologies are a win-win for fabric finishers. As we look forward to a promising partnership with Uniferro in Brazil, we would like to extend our thanks and best wishes for the future to Herbert Erdmann for his hard work over the years.”

The Sustainability Report 2023, which is now digitally available, provides insights into the past financial year and summarizes the main ecological, economic and social developments. Sustainability is an integral part of the corporate strategy of the CHT Group.

• The CHT Group uses the terms PEOPLE, PLANET and PERFORMANCE to emphasize its commitment to the 3 dimensions of sustainability worldwide and sets itself further goals. The CHT Group consistently aligns its sustainability strategy with all three ESG dimensions
• Responsibility for sustainability lies with the Chief Sustainability Officer
• Climate protection plays a central role worldwide - the corporate carbon footprint (Scope 1-3) 2023 adds up to 456 kt CO2(e)
• The Group is pursuing the goal of becoming climate-neutral by 2045
• At the end of 2021, the CHT Group signed up to the Science Based Targets initiative (SBTi) to meet the goals of the Paris Climate Agreement and committed to the 1.5 °C target
• SBTi has validated the CHT Group's reduction targets - by 2030, Scope 1+2 emissions will be reduced by - 42 % and Scope 3 emissions by - 25 %. 82 % of sales were achieved with sustainably classified products
• In 2024 EcoVadis awards the CHT Group's sustainability management with the Gold level for the first time

Bcomp announces its support on the new Italdesign Quintessenza™, a concept car unveiled at the 2024 Auto China in Beijing. Reflecting the harmonious relationship between nature and technology, the all-electric Quintessenza™ offers a blend of the functionality of a load-bearing pick-up and the dynamism of a GT-inspired family sports vehicle. The architectural concept breaks new ground in the automotive industry, as does its focus on the use of sustainable materials and finishes with the integration of Bcomp’s natural fibre composites across both its interior finishes and exterior body parts.

The Quintessenza™ is the world’s first vehicle to feature black-tinted NF (natural fibre) as a visual layer, showcasing Bcomp’s commitment to innovation. The interior design includes a foundational layer of ampliTex™ biaxial fabric combined with a layer of black-tinted NF. This advanced natural fibre composite, developed through a customised process that infuses the ampliTex™ fabric with a custom black resin, not only offers a durable and visually appealing surface finish but also facilitates the recycling process through its monomaterial composition.

The concept car also uses ampliTex™ material for several exterior parts, the front and back bumpers, the side rocker covers and the wheel arches. Not only does this enhance the vehicle’s appearance and cut CO₂ emissions by up to 85%, compared to carbon fibre, but as parts reach their end-of-life, natural fibre components can be processed through waste-to-energy plants, serving as a renewable energy source and avoiding the landfill route of carbon and glass fibres.

Cascale (formerly the Sustainable Apparel Coalition) will host Manufacturer Forum: Shanghai on June 28, part of an annual series of events designed to amplify the voices of manufacturers around the globe. Featuring targeted programming designed to address local challenges faced by manufacturers, the event will highlight solutions provided by Cascale’s Higg Index suite of tools and growing list of impact initiatives. The event takes place at the Shanghai New International Expo Center in collaboration with ISPO Shanghai, the multi-segment summer trade show.

Following successful runs in Bangalore, Dhaka, and Shenzhen, Manufacturer Forum: Shanghai will further facilitate pre-competitive collaboration in order to share best practices and collectively address critical challenges. Keynote speakers include Colin Browne, the organization’s newly-appointed CEO, and Scott Raskin, CEO of Worldly, Cascale’s technology partner and event sponsor.

Reflecting “Catalyst for Change,” the current theme of Cascale’s Manufacturer Forum series, the Shanghai event reinforces the organization’s commitment to support an open exchange between manufacturers and better understand their needs and ongoing challenges to jointly develop solutions.

Over 200 attendees are expected to attend the event, which brings together manufacturers with business leaders and critical stakeholders. Programming will cover a wide range of topics, including what manufacturers need to know about global policy, how strategic partnerships can drive industry change, the evolution of Higg FEM and verification processes, and the latest on decarbonization impacts. To aid goal and target-setting, there will also be dedicated training on setting Science-Based Targets for decarbonization, as part of an evolving and interactive program.

Stratasys Ltd. is announcing updates to several Industrial and Healthcare Business Unit products and Stratasys Direct. These include a new open platform for the F900™ 3D printer, more on-demand 3D printing capabilities and a new high-performance material for its Fused Deposition Modeling line.

OpenAM comes to the F900
Stratasys OpenAM™ is a software application that enables the user to modify machine controls to achieve results beyond standard print settings. Already available for the Fortus 450®mc printer, Stratasys is now making its OpenAM software available for the F900 printer. This will allow for expanded functionality and capabilities and will unlock new materials for F900 users.

New VICTREX AM 200 material for FDM
A new material offering that opens the application potential for demanding industries like aerospace and medical, where material properties are critical components of a 3D-printed solutions. This new high-performance, high-strength, validated material, VICTREX AM™ 200, will be available for the Fortus 450mc and the F900. VICTREX AM 200 is a PEEK-based polymer that is temperature, corrosion, and chemical resistant, with excellent mechanical properties which can be utilized with soluble and breakaway support material.

Carbon Fiber Visual Print Option for the F-Series
Carbon Fiber Visual Print Option is a new 5-slice (0.005”) layer height across the F-123 Series™ line of printers that is coming later this month for FDM®ABS-CF10. It produces a smoother surface finish, to provide the perfect finish when a part’s visual appearance is important to the application. It is built for applications that demand the durability of a carbon-filled polymer, but also requires a visually appealing result without additional post-processing.

F770 adds New Colors
The F770® printer can now print in multiple colors, in addition to its original single ivory color. Six new ASA colors, including red, white, light gray, black, blue, and yellow, will allow for more application versatility with FDM® ASA and ABS-M30 tried-and-true engineering plastics. The new colors enable printing without painting or other post-production marking, allowing parts to be available much faster, increasing productivity.

Somos NeXt Validated for SLA
Somos® NeXt™ is now a validated material for Stratasys NEO® stereolithography 3D printers. Somos NeXt is a resin with superior strength and can be used in automotive and consumer products, along with other applications, including prototyping, to produce durable, accurate and detailed parts.

New GrabCAD Software Print Integration Enhances On-Demand 3D Printing Capabilities
Stratasys has introduced Parts on Demand by GrabCAD, a new integration that synchronizes the company's software platform with Stratasys Direct. This addition allows GrabCAD Print™ customers to access Stratasys Direct’s fleet of 3D printers, allowing for larger and more intricate designs, a selection of more than 50 engineered materials, and the assurance of stringent quality inspections.

The LYCRA Company, a global leader in developing innovative and sustainable fiber and technology solutions for the apparel and personal care industries, is a 2024 thought leadership partner of the United Nations Fashion and Lifestyle Network and will be participating in the third annual meeting on June 3 at the United Nations (UN) Headquarters in New York City.

Jean Hegedus, The LYCRA Company’s sustainability director, will be joining the panel discussion on “Elevating Fashion: Sustainable Practices and Strategic Insights in the Apparel Industry.” She will highlight The LYCRA Company’s collaboration with Qore® to use its QIRA® product to potentially help reduce the carbon footprint of LYCRA® fiber by up to 44 percent.*

Available in early 2025, patented bio-derived LYCRA® fiber made with QIRA® will consist of 70 percent renewable content derived from dent corn. This renewable spandex will be the first available on a large scale and it will deliver equivalent performance to traditional LYCRA® fiber without requiring re-engineering of processes, garment patterns or fabrics.

This annual meeting brings together media, industry stakeholders, governments, and UN entities to advance knowledge, promote collaboration and enable action to meet Sustainable Development Goals (SDGs) in the fashion and lifestyle sectors.

The United Nations Fashion and Lifestyle Network is led by the United Nations Office for Partnerships and the Fashion Impact Fund. The Network stands as a catalyst for sustainable development within the fashion and lifestyle sectors.

*Estimate from Cradle-to-Gate Screening LCA for a representative LYCRA® fiber manufacturing facility, June 2022, prepared by Ramboll Americas Engineering Solutions, Inc.

Multiple global regulations set to take effect in the coming years have made traceability an imperative for retailers and brands. These include the Digital Product Passport, the Corporate Sustainability Due Diligence Directive, and the New York Fashion Sustainability and Social Accountability Act, to name a few.

While companies are aware of the importance of traceability, research indicates that they are not prepared to comply with upcoming legislation. A recent KPMG survey highlighted that 43% of executives at major enterprises had no visibility or were “largely unclear” about the performance of their Tier 1 suppliers. At the same time, only 28% of companies had clear visibility into Tier 2 suppliers.

TradeBeyond’s recently published Supply Chain Traceability Guide, the latest installment of its Retail Sourcing Report series, highlights the myriad challenges that companies face in implementing effective traceability programs. This report is relevant for all industries, and is especially topical for the apparel and footwear sectors, which are under increasing scrutiny to enhance traceability to ensure sustainability.

The report highlights retail’s slow progress in achieving transparency, as evidenced by the Fashion Transparency Index, which found that the average transparency score across 250 of the world’s largest brands and retailers was just 23%. That suggests that progress on transparent disclosure of social and environmental data is still lagging.
 
The report shows that brands fall short on most key measures of sustainability and traceability, including publishing a responsible code of conduct and providing visibility into their Scope 3 carbon footprint. The United Nations Economics Commission found that only a third of the top one hundred global clothing companies track their own supply chains. One of the obstacles is complexity. More than two-thirds (69%) of fashion companies report that complexity of their global business networks is an obstacle to visibility.

In addition to a lack of visibility, false sustainability claims are also rampant. Greenpeace found that in the apparel and footwear sector, 39% of sustainability claims are false or deceptive. Lack of third-party verification of ESG measures is also rampant.

The highest scoring brands in the 2023 Fashion Transparency Index included luxury brands such as Gucci and retailers such Target Australia, Kmart Australia, OVS, and Benetton. These companies back up their commitment with solid action on multiple measures of traceability.

Along with legislative requirements, consumers are a key driving force pushing companies to improve their traceability initiatives. McKinsey research found that 66% of consumers consider transparency to be a key factor when making a purchase decision and 73% of consumers would pay more for products with transparency into production and sourcing.

The report also highlights key challenges to overcome in the journey to traceability, including effective communication between stakeholders, compliance with new regulations, technology barriers, and data complexity.

On the positive side, the industry is responding with sophisticated technology, including software systems that incorporate artificial intelligence and blockchain-enabled traceability, which provide the required visibility and compliance.

Traceable fiber technology, which allows for traceability from the material origin of a product until its end-life, provides the option of a “fiber-forward” rather than a “product backward” approach to achieving traceability.

Aside from the regulatory and consumer drivers, there is a strong business case for implementing traceability, which includes cost savings, operational efficiency, brand protection and reducing supply chain risk. As such, TradeBeyond expects a rapid evolution in traceability programs across industries, especially in those that lag in best-practices.

While there has been considerable progress in recent years toward accurately tracing the complete origins of products, much more needs to be done. Brands and retailers must intensify their efforts to stay compliant with escalating regulations and align with evolving consumer preferences.

Breaking new ground in plastics recycling means assessing the value chain from end to end. The big opportunities for the future are in fine-tuning the individual process steps; from the collection of recyclable materials to the recycling process and the end product. This is where the cooperation of Lindner and the EREMA Group comes in, officially launched following the 50/50 founding of the holding BLUEONE Solutions in August 2023 to which shares of Lindner Washtech were contributed. The expertise of EREMA, a manufacturer of extruders and filtration solutions for plastics recycling and the largest company within the EREMA Group, has now been combined with the expert know-how from Lindner Washtech, a leading provider of all-in-one solutions for shredding, sorting and washing plastic feed materials.

Data transfer ensures more efficient recycling processes
Process control is an especially important aspect of plastics recycling, which is why standardising the process control system was what the two companies focused on first. "Together, we have developed a platform that allows data to be exchanged between the extruder and the washing system," says Manfred Hackl, CEO of the EREMA Group at IFAT in Munich. "This enables us to analyse the data more precisely so that effective improvement measures can be deduced." All key parameters are taken into account and monitored via a digital interface. For example, it is possible to use information relating to the current throughput of the EREMA Pre Conditioning Unit to optimise the washing process as soon as possible so that it can compensate for fluctuations in capacity and achieve a significant increase in output. This data transfer represents a new step on the roadmap to digitalization.

High efficiency due to smart energy management
"To ensure sustainable recycling, it is necessary to find the right process for each application and to make sure that the individual process steps are perfectly coordinated," emphasizes Michael Lackner, Managing Director of Lindner. Coordinating the process steps has already achieved initial success in energy management, and a clear example of this is heat recovery. "We use the latent heat generated during the extrusion process as an energy source for the washing and drying process," explains Lackner. "This enables our customers to sustainably reduce their energy costs and carbon emissions".

Making the most of synergies along the value chain
Synergies need to be used to establish the quality standards specified for each end application. "The key question is how we can improve the end product and increase the overall efficiency of the recycling process at the same time," agree Manfred Hackl and Michael Lackner. This will only work if companies work together along the value chain. The industry leaders can already point to several examples where together they have improved recycling processes and made it possible to move away from downcycling. "An example of this is the recycling loop of HDPE starting material, which is processed into high-quality, food-safe rHDPE pellets using our two technologies," says Lackner. Lindner Washtech and EREMA continue to work intensively together to develop strategies for upcycling plastics and increase recycling rates.

Together with international partners from industry and research, the DITF are presenting the Digital Textile Micro Factory at drupa's touchpoint textile (from May 28 to June 7, 2024). A fully networked on-demand production of sports products will be presented - from virtual design to the finished product.

One highlight is the material buffer between the printer and cutter, which links the continuous printing process with the step-by-step cutting process. At the end of the production chain, a robot arm sorts all the cut parts belonging to a product, such as the front and back sections, sleeves and collar trim of a T-shirt, into the corresponding boxes. Manual handling is only necessary in exceptional cases.

In future, digitally networked design and production chains will make it possible to react quickly and specifically to customer wishes and trends. This approach protects the environment and conserves resources: instead of producing mass-produced goods for the trash, the products are tailored precisely to requirements. At the trade fair, the carbon footprint from virtual development to the finished product will also be determined and explained using a model.

• Continued growth in the semiconductor business
• Weak demand for carbon fibers further impacts Group sales and profitability
• Group sales down slightly at €272.6 million (-3.9%), adjusted EBITDA up 5.0% to €42.1 million
• Adjusted EBITDA margin at 15.4% after 14.1% in the same quarter of the previous year
• Outlook for 2024 confirmed

SGL Carbon had a solid start to the first quarter of 2024. Despite the slight decline in sales of 3.9% to €272.6 million (Q1 2023: €283.7 million), adjusted EBITDA improved by 5.0% to € 42.1 million (Q1 2023: € 40.1 million). Weak demand in the Carbon Fibers business unit in particular have a negative impact on the Group's sales and earnings performance. By contrast, slightly higher sales and, especially, the increase in adjusted EBITDA in the Graphite Solutions and Process Technology business units had a positive effect on the Group's performance.

Outlook
In line with the course of business in the first three months of 2024, the company confirms its sales and earnings outlook for the 2024 financial year. Consolidated sales for the 2024 financial year are expected to be at the previous year's level and adjusted EBITDA between €160 million and €170 million.