From the Sector

SSM Schärer Schweiter Mettler AG, a subsidiary of the Rieter Group, has appointed Per Olofsson as Managing Director and member of the SSM Group’s management team effective April 1, 2021.

Mr. Olofsson is a Swedish citizen and holds a Master of Science Degree in Supply Chain and Operations Management from the University of Liverpool, United Kingdom, and an Executive MBA from the International Institute for Management Development (IMD) in Lausanne, Switzerland.

Per Oloffson joined the Rieter Group in 2013 and is an experienced operations manager with a proven management track record at both local and global level.

SUPREME GREEN COTTON® has been chosen by the Italian brand Diesel for the ‘Green Label’, ‘NightCrush’ and ‘Malign’ jersey T-shirts. From cotton seed to fiber, yarn production, fabric and final garments, the full supply chain is not just transparent but located in a very focused area 100% in Greece.
 
SUPREME GREEN COTTON® is the premium quality smart yarn collection by Varvaressos S.A. European Spinning Mills. The Greek yarn manufacturer has developed an innovative and socially responsible system from the seed to the garment that supports farmers and businesses at the foothills of Mount Olympus.
 
SUPREME GREEN COTTON® uses a customized satellite-powered drip irrigation system in the fields that allows saving up to 40% of water. Water usage is one of the pressing issues in cotton production. Thanks to the advanced drip irrigation system, plants are watered and fed without wasting a single drop. Thanks to a custom-developed app connected via satellite and meteorological stations in selected cotton fields, farmers can monitor the fields in real time. The IoT – Internet of Things system warns them to take action to ensure plants to flourish healthily and high a higher yield in a sustainable way.
 
The smart yarns are Made in Greece and have been certified by MADE IN GREEN by OEKO-TEX® which assures transparency and traceability, moreover the company has also obtained the STeP by OEKO-TEX®.

Flocus™ offers a range of kapok textile materials such as fibers, yarns, textiles and nonwovens, which provide the textile industry with a naturally sustainable and regenerative alternative which has not been available before.

Kapok is a natural fiber, traditionally used by local population for fillings but with no large scale applications until Flocus™ founding. Beside kapok several interesting properties, there were some limits that had been inhibiting the possibility to use it at a larger scale and build a supply chain on textile products based on it: kapok fibers are short stapled ones (2-4 cm length), very light and empty inside: for this reason they incorporate air and made the spinning attempts unsuccessful.

Flocus™ pioneers sustainable and regenerative textile solutions based on kapok fiber, and it is creating a responsible supply chain for kapok.

With one of the most advanced technologies in the market, FLOCUS™ can spin the highest kapok percentage, offer yarns in the thinnest counts with the possibility of low minimum order quantity per blend.

Flocus™ Kapok offers products which can reduce the presence of animal and synthetic products in the market, utilizing a completely natural alternative without abandoning functionality.

The Flocus™ team works in partnership with companies who want to investigate the use of the eco-responsible fibers and is testing the wide range of applications of Flocus™ kapok stuffing, yarns, fabrics, nonwovens for thermo and sound insulation, waddings, foam replacement, medical, automotive and technical uses and others.

The dates are set: IFFT/Interior Lifestyle Living is welcoming exhibitor registration for its 2021 edition, to be held from 18 – 20 October 2021 in the South Halls of Tokyo Big Sight. The dedicated fair for interior design is once again set to attract not only retail buyers but also visitors from design and architecture offices, commercial facilities, and other contract businesses. The 2019 edition welcomed 352 exhibitors from 14 countries and regions as well as 16,016 visitors from 34 countries and regions, receiving much positive feedback for its increased focus on contract business.
 
IFFT/Interior Lifestyle Living 2019
Returning after a hiatus in 2020 due to the COVID-19 pandemic, IFFT/Interior Lifestyle Living will once again create opportunities for exhibitors to meet new clients and expand their businesses. Messe Frankfurt Japan Ltd is working to put all of the appropriate safety and hygiene measures in place to protect participants during the fair period, and prevent the spread of COVID-19.
 
New ETHICAL zone added to satisfy consumer demand
A newly introduced ETHICAL zone will help industry players explore the themes of sustainability and ecology, which are continuing to gain traction in the interior design market. The zone focuses on environmental protection, up-cycling, fair trade, products that support people with disabilities, organic products, local production for local consumption, and more. Furniture production from recycled forest materials will also be a focus of the zone, which will be promoted in the run up to the fair through sector-specific media channels. This will include dedicated promotional activities targeting ethically driven retailers and restaurants.
 
A variety of booth sizes to accommodate exhibitors’ needs
In response to requests from exhibitors who showcase smaller items, a new booth size has been added for 2021. Measuring 6.3 sqm (width 3m x depth 2.1m), the new booth option is one size smaller than the existing 9 sqm booth, adding more choice for exhibitors
 
Dedicated lifestyle themed zones
Proving popular amongst trade buyers during previous editions, ‘CREATIVE RESOURCE’ is a zone devoted to innovative interior materials, as well as parts and services for interior design and home remodelling. Products featured at the zone include wallpaper, floor coverings, paints and related materials. First introduced in 2012, the zone has grown in stature as the destination for the likes of manufacturers, architects, designers and developers to find inspiration.
 
The fair’s zoning encompasses a variety of different product categories and themes. This not only simplifies the sourcing process for trade buyers, but it also maximises business exposure for exhibitors. Day-to-day lifestyle products – both stylish and functional – will be displayed in the ‘HOME’, ‘ACCENT’ and ‘EVERYDAY’ zones with a focus on living spaces, accessories and household items respectively.
 
Moreover, catering to the world of convenience and home cuisine, an array of pragmatically-designed packaged food will be presented at 'FOODIST', while innovative dining items will be gathered at the ‘KITCHEN LIFE’ zone.
 
Highlighting high quality local craftsmanship, designs from Japanese artisanal artists with a modern touch will be located in the ‘JAPAN STYLE’ zone. The latest designs from highly acclaimed international brands will be displayed too, in the ‘MOVEMENT’ area, while work from up-and-coming young designers will appear at the ‘TALENTS’ and ‘NEXT’ zones.
 
About IFFT/Interior Lifestyle Living
IFFT/Interior Lifestyle Living is held annually in fall and is the sister fair of Interior Lifestyle Tokyo held in spring, which is based on Ambiente, Messe Frankfurt’s largest and most important international consumer goods fair, and Heimtextil, the biggest international home and contract textiles fair. With the synergetic effects of these leading global trade fairs in the high-end interior market, and with Messe Frankfurt’s global network, IFFT/Interior Lifestyle Living is a key platform for professionals, buyers, architects and those engaged in domestic and international contract business.

• Mostafiz Uddin, Managing Director of Denim Expert Limited and Founder of Bangladesh Apparel Exchange (BAE) has won Sustainable Fashion Champion at the Drapers Sustainable Fashion Awards 2021, which took place virtually on 10 March.

On receiving the award, Mostafiz said he wants to be a game-changer in the apparel industry, leading by example to inspire others to behave responsibly and ethically.

He also dedicated the award to H&M which, he explained, supported his business, Denim Expert, through the pandemic by continuing to place orders He said the loyal support of the Swedish fashion giant almost certainly helped save the livelihoods of 2000 workers at his factory and their 10000 family members. “That’s true sustainability leadership,” he said.

The Drapers Sustainable Fashion Awards recognise steps being made in reducing the fashion industry’s environmental impact and creating fairer working conditions across the supply chain.
Judged by an independent panel of sustainability and fashion retail experts, the awards shine a spotlight on best practice within the global fashion industry.

Covid-19 has presented unforeseen challenges for fashion retailers and brands, but it has also given us all an opportunity to build back better. Forward-thinking fashion businesses know change is not optional, and are embracing their responsibilities and ability to make a difference.

Mostafiz Uddin has been recognised as the Sustainable Fashion Champion 2021 for setting examples in promoting sustainability during the Covid-19 pandemic which broke out worldwide in March last year.
Jill Geoghegan, Acting Editor of Drapers, said: “Despite the challenges thrown up by the Coronavirus pandemic, fashion brands and retailers increasingly recognise that sustainability is a business imperative.”  
“Many businesses continued to invest in cleaning up their supply chains and introducing new models of working, despite the unprecedented trading conditions.

“The Drapers Sustainable Fashion Awards highlight and celebrate these advancements, paving the way for a more responsible future for the industry.” Managing Director of Denim Expert Limited Mostafiz Uddin said: “In the pandemic, my factory Denim Expert Limited kept true to its commitment towards sustainability, despite an extremely difficult trading landscape.

“During the pandemic, I was vocal about the issue of buyer-supplier relationships and, in speaking out, I wanted to champion the cause of suppliers all over the world. Too often suppliers in garment supply chains do not have a voice because they fear that by speaking out, they will be treated unfavourably by brands.

“This was, of course, a risk on my own part but I like to think I stood up for what I think is right and ultimately, I believe progressive brands understood I was coming from a good place. Like them, all I want to see is a fair, ethical and sustainable industry where brands and retailers work in an environment of collaboration, not conflict.”

Mostafiz also had some special praise for H&M. He said: “It would have not been possible for me to support my workers during the pandemic, had my factory not received help from H&M during the unprecedented time. While Denim Expert suffered from huge orders cancellation and orders hold, H&M supported us by placing orders in the pandemic that saved thousands of lives and livelihoods. Therefore, I would like to dedicate this Award to H&M and its CEO Helena Helmersson.”

The judges of Drapers Sustainable Fashion Champion Award 2021 have been Kerry Bannigan, Founder, Conscious Fashion Campaign; Sarah Ditty, Global Policy Director, Fashion Revolution; Miriam Lahage, Founder, Aequip; Samata Pattinson, CEO, Red Carpet Green Dress; Caroline Rush, Chief Executive Officer, British Fashion Council; Lucy Shea, Group CEO, Futerra; Jane Shepherdson, Chairman, My Wardrobe HQ; and Dilys Williams, Director, Centre for Sustainable Fashion.

• Major Monforts denim customers continue to pioneer new initiatives that are pushing the boundaries of sustainable production.

Recycling their cotton waste has become one way these companies can do more with less, and at the recent Kingpins24 Flash online event, Sedef Uncu Aki, director of Orta, headquartered in Istanbul, Turkey, announced a new partnership with leading recycling operation Gama Recycle.

Traceable
“Through this local partnership we will supply the waste from our spinning mills and return around 3,000 tons of premium quality cotton back to them,” she said. “We have established a truly controlled and traceable system and partnering with a domestic recycling centre is important because a lot the carbon emissions associated with recycling usually come from transportation.”

Orta’s ZeroMax range meanwhile uses no cotton at all, being based on Lenzing’s Tencel cellulosic fibre, while the company’s involvement in denim production for a recent launch by Levi Strauss, of jeans made with organic cotton and Circulose – a breakthrough material developed by re:newcell of Sweden and partners – was hailed as a further step forward.

To make Circulose, re:newcell repurposes discarded cotton textiles, such as worn-out denim jeans, through a process akin to recycling paper. The incoming waste fabrics are broken down using water. The colour is then stripped from these materials using an eco-friendly bleach and after any synthetic fibres are removed from the mix, the slurry-like mixture is dried and the excess water is extracted, leaving behind a sheet of Circulose. This sheet is then made into viscose fibre which is combined with cotton and woven into new fabrics.

Circular Park
Omer Ahmed, CEO of Artistic Milliners also announced plans for his company’s new 70,000 square-foot Circular Park in Karachi, Pakistan, at Kingpins24 Flash.

Once complete, this will add three million square metres of additional denim capacity a month to the company’s production and take its total recycled output to a monthly five million metres.
Ahmed observed that there is currently a lack of sustainable fibres that are readily available to use for denim production at scale.

“Organic cotton is too expensive, and in my opinion always will be,” he said. “Cottonised hemp is also not cheap and it’s hard to mix with cotton, while the new regenerated cellulose fibres that are now emerging are promising, but currently in short supply. Recycled polyester is meanwhile still based on petroleum resources which we want to move away from. As a consequence, there are only a few other options for us as a manufacturer and this new project will help us minimise our own waste while significantly lowering our carbon footprint.”

Other Monforts denim customers to introduce cotton fibre recycling operations at their plants recently include AGI Denim, Bossa and Soorty.

Vertical savings
Refresh is the name of the latest collection from AGI Denim – reflecting the company’s significant reduction in water consumption.

The company has just opened new fibre spinning and denim mills at its complex in Karachi, Pakistan.

“Over the years we’ve gone through a series of backward integration steps to become fully vertical,” said AGI Denim executive director Ahmed Javed, at Kingpins24 Flash. “In our latest expansion, we revisited every step of the production processes in order to make resource savings.”

Innovations have included the installation of proprietary robotics for garment finishing, but the most attention has been paid to water savings.

“Pakistan is one of the largest cotton-producing companies in the world and we’re fortunate that the type of cotton that is grown here is well suited to denim production and also helps us lower our carbon footprint, with everything done in close proximity,” Javed said. “In the lifecycle of a pair of denim jeans, however, cotton fibre production contributes 68% of water consumption. While we cannot control how much water cotton needs for it to grow, we can rethink the way we use it in our factory.”

Refresh-branded denims are washed from 100% recycled water as a result of the company’s new wastewater treatment plant, which puts production wastewater through a series of steps beginning with equalisation, followed by aeration and concluding with sedimentation. The water travels through filtration and ultrafiltration systems before being subjected to an activated carbon system and finally a reverse osmosis system to reduce any dissolved salts.

AGI now recycles 4.4 million gallons of water each month – enough to wash a million pairs of jeans.

Sustainable
Monforts has a leading position in the field of denim finishing with its well proven Thermex continuous dyeing systems, Montex stenter dryers and other lines for resource-efficient and economical processing.

“Our denim partners are constantly setting themselves new goals in respect of sustainable production – and more importantly, achieving them,” says Hans Wroblowski, Monforts Head of Denim. “We work closely with them with the aim of constantly optimising processing parameters and achieving further savings in energy, water and raw materials throughout the dyeing and finishing stages of production.”

The latest Monforts innovation for denim is the CYD yarn dyeing system. This technology is based on the effective and established dyeing process for denim fabrics that is now being applied for yarn dyeing. The CYD system integrates new functions and processes into the weaving preparation processes to increase quality, flexibility, economic viability and productivity. A full CYD line is now available for trials at the company’s Advanced Technology Centre in Mönchengladbach, Germany.”

• On 22.03 STOLL will offer a webinar through the online platform of Fashion Council Germany on the topic of digitalisation and sustainability in STOLL flat knitting.

Webinar Description
Digitalisation and sustainability are becoming increasingly essential for the success and existence of fashion companies. The flat knitting industry with its immense flexibility and diversity offers many opportunities for digital solutions and sustainable practices. In this webinar, Karl Mayer Stoll will share how digital design tools enable more sustainable knitwear development.

Fashion Council Germany
The FCG is the patron to strengthen the German fashion and design landscape for a visionary, technological & sustainable future in a global market.
The Fashion Council Germany represents the interests of fashion "designed in Germany". Founded in January 2015 in Berlin. On the initiative of national industry experts, the Fashion Council Germany promotes German fashion design as a cultural and economic asset and supports young designers from Germany. In addition to the promotion of young designers, special attention is paid to education, sustainability and fashion technology as well as to the promotion of cross-disciplinary dialogue and networking. Against this background, the Council carries out essential lobbying work in politics, business and culture, strives for visibility and emphasises the global relevance of fashion design and Germany as a fashion location at home and abroad.

Since the beginning of last year, the FCG offers workshops on various business topics in the fashion industry. Until further notice, all FCG seminars will take place online due to the Corona crisis.

Royal DSM announces that its DSM Engineering Materials business will launch mass-balanced bio-based Arnitel®, a thermoplastic elastomer, together with Sympatex Technologies. In this way, DSM Engineering Materials is taking the next step on its sustainability journey and enabling its customers to transition to a more circular and bio-based economy.

To address growing consumer and legislative demand for lower carbon footprint and more sustainable feedstock, the sports and apparel value chain is increasingly integrating bio-based materials into its designs. By offering a new range of mass-balanced bio-based Arnitel®, DSM Engineering Materials is enabling membrane manufacturer, Sympatex Technologies to meet these demands and make more sustainable choices.

DSM’s bio-based Arnitel® is manufactured with bio-based feedstock using a mass-balance approach¹. The end product contains more than 25% bio-based content by weight.

Sympatex uses Arnitel® to manufacture its waterproof, windproof, and breathable membranes for sports applications. The transition to bio-based feedstock will maintain the unique functional properties of Arnitel® and will enable Sympatex to easily shift to a more sustainable solution with a lower carbon footprint without having to requalify materials.

¹ Mass balance accounting is a well-known approach that has been designed to trace the flow of materials through a complex value chain. The mass balance approach provides a set of rules for how to allocate the bio-based and/or recycled content to different products to be able to claim and market the content as ‘bio’-based or ‘recycled’-based. Source: Ellen MacArthur Foundation (Mass Balance White Paper).

Summer 2020 saw the first ever staging of PREMIUM+SEEK Passport by JOOR. In the midst of the pandemic, it offered the industry an opportunity to continue doing business, stay in contact with key partners, and expand business networks. Over 150,000 retailers took part in the event in 2020 and 40,000 products were sold.

The second edition of the PREMIUM+SEEK+JOOR Passport event will be an optimised and focussed version and offers participants maximum opportunity for success. From 27 January around 100 brands curated by the team at the PREMIUM GROUP will once again have access to JOOR’s network of over 200,000 selected international retailers. Virtual showrooms will act as the location for showcasing the latest collections, telling brand stories and closing deals. Every showroom can be individually designed by participating brands so as to stage and communicate their brand identity in a purely digital setting. Accessible at any time, without time-consuming logistics.

The partnership between the PREMIUM GROUP and JOOR is due to continue in July 2021. In future, there will be a hybrid event where the physical and virtual worlds will go hand in hand. Face-to-face is still essential and now more important than ever. Networking becomes easier and more effective; stories are told and emotions triggered. Processes that follow are digitally optimised with JOOR and handled more easily than before.

In summer 2021 there will be a return to a physical coming together with SEEK, PREMIUM and FASHIONTECH. From 6-8 July – as part of Frankfurt Fashion Week.

The Turkish textile industry, which continues its exports and investments without slowing down despite the devastating pandemic, once again proved its strength, especially in this period. ITM 2021 Exhibition, which will be held in Istanbul between 22 and 26 June 2021, will provide a great advantage to companies that desire to expand their investments and introduce their brand new technologies.

Although there were slowdowns in the textile industry in April and May this year due to the troublesome coronavirus pandemic , the Turkish textile industry succeeded a big breakthrough with the removal of restrictions in June, thanks to both its textile production infrastructure and international exports capacity. The exports of the textile and raw materials sector increased and the companies turned to new investments. While many local companies enlarged their facilities, some of them made new investment decisions. For example, while a giant hygienic and medical fabric production facility was invested in Çorlu, another Turkish company, a global brand in textile machinery production, decided to invest 40 million Turkish Lira. Gaziantep-based spunbond and meltblown nonwoven manufacturer company added two new meltblown lines to its operations. Another company also began to invest in the production of raw materials that they import. This investment activity in Turkey, where is a manufacturing base of European customers whet the appetite of international investors. One of South Korea's largest conglomerates has rolled up its sleeves for an investment of 430 million US Dollars in Çerkezköy. Due to the investments, the purchase of textile machinery increased by 37.1 percent in the first nine months of 2020 amounting to over 1 billion US Dollars.

The Accurate Address for Investment Decisions: ITM 2021 Exhibition
Although the companies took advantage of the pandemic period as an opportunity and continued their investments, many of them are waiting for the ITM 2021 Exhibition for large machinery purchases. ITM 2021 Exhibition, which will be held between 22 and 26 June 2021 at Istanbul Tüyap Fair and Congress Center, will gather thousands of participating companies and visitors under one roof. The company officials, who will have the opportunity to observe the latest technological products to be exhibited by the international and domestic exhibitors, will direct their investments by meeting with the experts of the sector. The machines produced for technical textiles, which became even more important during the devastating pandemic period, will attract the attention of visitors. Thanks to the machinery purchases and business partnerships of both domestic and international companies, there will be great dynamism in the textile industry and the national economy.