From the Sector

all
Corona
Sustainable
Textile Business
Textile Machinery
Fibres, Yarns & Nonwovens
Technical Textiles
Interior Textiles
Clothing
Companies
Fairs
Trade
Associations
People
Archive
Reset
120 results
(c) Lenzing AG
article as PDF
21.06.2019

Lenzing Group to become the first carbon neutral fiber producer in the world

  • Lenzing sets net-zero CO2 emissions target by 2050
  • Reduction of specific CO2 emissions by 50 percent until 2030
  • Investment of more than EUR 100 mn to combat 1.3 Mt of CO2 emissions
  • Commitment to follow the Science Based Targets concept

Lenzing, member of the CEO Climate Leaders Group of the World Economic Forum and a signatory to the United Nations Fashion Industry Charter for Climate Action, will drastically reduce its CO2 footprint. The Lenzing Group will invest EUR 100 mn over the coming years to reduce carbon emissions both inside its operational boundaries (scope 1+2) and in its supply chain (scope 3). Due to its ambitious CO2 emission reduction strategy, the Lenzing Group will further contribute towards helping customers to transition their business to a lower CO2 base.

A first milestone is set for 2030, when Lenzing plans to reduce CO2 emissions per ton of product by almost 50 percent (scope 1+2 and 3) compared to a 2017 baseline. The total CO2 reduction of all the planned initiatives will yield 1.3 Mt.

  • Lenzing sets net-zero CO2 emissions target by 2050
  • Reduction of specific CO2 emissions by 50 percent until 2030
  • Investment of more than EUR 100 mn to combat 1.3 Mt of CO2 emissions
  • Commitment to follow the Science Based Targets concept

Lenzing, member of the CEO Climate Leaders Group of the World Economic Forum and a signatory to the United Nations Fashion Industry Charter for Climate Action, will drastically reduce its CO2 footprint. The Lenzing Group will invest EUR 100 mn over the coming years to reduce carbon emissions both inside its operational boundaries (scope 1+2) and in its supply chain (scope 3). Due to its ambitious CO2 emission reduction strategy, the Lenzing Group will further contribute towards helping customers to transition their business to a lower CO2 base.

A first milestone is set for 2030, when Lenzing plans to reduce CO2 emissions per ton of product by almost 50 percent (scope 1+2 and 3) compared to a 2017 baseline. The total CO2 reduction of all the planned initiatives will yield 1.3 Mt.

More information:
Lenzing Group
Source:

Lenzing AG

print close
more
article as PDF
19.06.2019

ZDHC Foundation Welcomes Broad Chemical Industry Engagement

After an intense dialogue and a series of meetings during the past year between the ZDHC Board of Directors and the GCIRT, an alignment was gained on ZDHC organisational commitments and a mutual understanding of the role of chemical suppliers within the ZDHC Programme. This opens the doors for broader, more active distribution of chemistry expertise and implementation support of textile dye and leather chemical manufacturing industry in the ZDHC Programme.

The Global Chemical Industry Round Table (GCIRT), sent an open letter to ZDHC in May 2018 and is a group of the leading chemical solution providers in the textile and leather industry with the collective aim of driving the industry further to become more sustainable. GCIRT’s signatory’s engagement into the ZDHC Programme will support a faster transformation of the industry by taking complexity out of the supply chain and to find appropriate solutions for the industries’ requirements.

After an intense dialogue and a series of meetings during the past year between the ZDHC Board of Directors and the GCIRT, an alignment was gained on ZDHC organisational commitments and a mutual understanding of the role of chemical suppliers within the ZDHC Programme. This opens the doors for broader, more active distribution of chemistry expertise and implementation support of textile dye and leather chemical manufacturing industry in the ZDHC Programme.

The Global Chemical Industry Round Table (GCIRT), sent an open letter to ZDHC in May 2018 and is a group of the leading chemical solution providers in the textile and leather industry with the collective aim of driving the industry further to become more sustainable. GCIRT’s signatory’s engagement into the ZDHC Programme will support a faster transformation of the industry by taking complexity out of the supply chain and to find appropriate solutions for the industries’ requirements.

The GCIRT members are: ARCHROMA (Switzerland); CHT Germany GmbH (Germany); Colourtex Industries Private Limited (India); DyStar Singapore Pte Ltd (Singapore); Huntsman Textile Effects (Singapore); KISCO (Korea); Pulcra Chemicals Group (Germany); RUDOLF GmbH (Germany); TANATEX Chemicals B.V. (Netherlands).

More information:
ZDHC GCIRT Huntsman Textile Effects Archroma DyStar Rudolf Group CHT
Source:

ZDHC Foundation

print close
more
04.06.2019

Autoneum publishes Corporate Responsibility Report 2018

Assuming social responsibility and acting sustainably has been Autoneum's focus since it became an independent company. In order to achieve the best results possible, the Company last year has defined a number of quantitative and qualitative targets in the areas of “Sustainable Products and Production Processes”, “Fair and Attractive Workplace”, “Good Corporate Citizenship” and “Responsible Supply Chain Management” for 2025. In all these areas Autoneum has achieved important successes already in 2018.

Through the consistent implementation of environmental efficiency projects – a total of over 80 worldwide – Autoneum reduced its environmental impact further in 2018. For example, both the amount of waste (–5.9%) and water consumption (–13.4%) have fallen sharply. At the same time, various plants – particularly in Asia and North America – have expanded their recycling capacity, significantly increasing the amount of production waste reused in the manufacturing process (14.9%).

Assuming social responsibility and acting sustainably has been Autoneum's focus since it became an independent company. In order to achieve the best results possible, the Company last year has defined a number of quantitative and qualitative targets in the areas of “Sustainable Products and Production Processes”, “Fair and Attractive Workplace”, “Good Corporate Citizenship” and “Responsible Supply Chain Management” for 2025. In all these areas Autoneum has achieved important successes already in 2018.

Through the consistent implementation of environmental efficiency projects – a total of over 80 worldwide – Autoneum reduced its environmental impact further in 2018. For example, both the amount of waste (–5.9%) and water consumption (–13.4%) have fallen sharply. At the same time, various plants – particularly in Asia and North America – have expanded their recycling capacity, significantly increasing the amount of production waste reused in the manufacturing process (14.9%).

To further improve working conditions especially in production, measures were taken in all Business Groups in 2018 to enhance occupational health and safety and well-being in the workplace. A global employee satisfaction survey conducted in fall last year has confirmed the first positive effects of these measures.

A complete overview of all targets and activities during the past year can be found in the Corporate Responsibility Report 2018 and is available at www.autoneum.com/corporateresponsibility/.

More information:
Autoneum Autoneum Management AG
Source:

Autoneum Management AG

print close
more
(c) Avery Dennison
article as PDF
29.04.2019

Sappi: Once again honoured with a prestigious award in 2019

Sappi wins Avery Dennison Supplier Distinction Award for the second time in a row

In 2019, Sappi was selected for an Avery Dennison Supplier Distinction Award for the second consecutive year. In doing so, the awarding authority honoured the paper manufacturer’s sustainable conduct, its high-quality products and being a real global supplier. While its group headquarters is in Johannesburg, South Africa, Sappi’s global packaging and speciality papers business supports eight Avery Dennison plants worldwide with numerous products from multiple facilities.

The Sappi team was delighted when they heard the results of this year’s Avery Dennison Supplier Distinction Award. Following an award last year, Sappi’s status as a leading supplier was again honoured with this significant award in 2019. “We were recognised for our excellent quality and for being a truly global supplier supporting Avery Dennison’s growth, especially in the USA. And finally, because of our expanded portfolio following the acquisition of Cham Paper Group,” said Thomas Kratochwill, Vice President Sales & Marketing Packaging and Speciality Papers (Sappi Europe).

Sappi wins Avery Dennison Supplier Distinction Award for the second time in a row

In 2019, Sappi was selected for an Avery Dennison Supplier Distinction Award for the second consecutive year. In doing so, the awarding authority honoured the paper manufacturer’s sustainable conduct, its high-quality products and being a real global supplier. While its group headquarters is in Johannesburg, South Africa, Sappi’s global packaging and speciality papers business supports eight Avery Dennison plants worldwide with numerous products from multiple facilities.

The Sappi team was delighted when they heard the results of this year’s Avery Dennison Supplier Distinction Award. Following an award last year, Sappi’s status as a leading supplier was again honoured with this significant award in 2019. “We were recognised for our excellent quality and for being a truly global supplier supporting Avery Dennison’s growth, especially in the USA. And finally, because of our expanded portfolio following the acquisition of Cham Paper Group,” said Thomas Kratochwill, Vice President Sales & Marketing Packaging and Speciality Papers (Sappi Europe).

(c) Avery Dennison
More information:
Sappi
Source:

RUESS PUBLIC T GMBH

print close
more
(c) Fong’s Europe GmbH
25.03.2019

FONG’S EUROPE celebrates the 100th anniversary of its flagship THEN brand at ITMA

FONG’S EUROPE, based in Schwäbisch Hall, Germany, will celebrate the 100th anniversary of its flagship THEN brand for advanced dyeing technology with a special reception for customers and agents at ITMA 2019 in Barcelona.

The company, which has been a member of the CHTC FONG’S group since 2004, has its origins in the German city of Chemnitz, where back in 1919 Rudolf Then founded a barrel-making business which soon branched out into piece dyeing machines.

The company’s reputation for innovation began early, with the introduction of ceramic linings for dye baths, which were then made of wood, in order to avoid staining and allow easy cleaning. At the end of the 1920s, Rudolf Then was also quick to recognise the acid-resistant advantages of stainless steel for dyeing vessels.

Relocating to West Germany after World War 2, Rudolf Then ran a number of businesses in Schwäbisch Hall, eventually founding THEN in 1955 with partner Karl Kurz, who later took over the business specialising in dye vats and other textile equipment.

FONG’S EUROPE, based in Schwäbisch Hall, Germany, will celebrate the 100th anniversary of its flagship THEN brand for advanced dyeing technology with a special reception for customers and agents at ITMA 2019 in Barcelona.

The company, which has been a member of the CHTC FONG’S group since 2004, has its origins in the German city of Chemnitz, where back in 1919 Rudolf Then founded a barrel-making business which soon branched out into piece dyeing machines.

The company’s reputation for innovation began early, with the introduction of ceramic linings for dye baths, which were then made of wood, in order to avoid staining and allow easy cleaning. At the end of the 1920s, Rudolf Then was also quick to recognise the acid-resistant advantages of stainless steel for dyeing vessels.

Relocating to West Germany after World War 2, Rudolf Then ran a number of businesses in Schwäbisch Hall, eventually founding THEN in 1955 with partner Karl Kurz, who later took over the business specialising in dye vats and other textile equipment.

Throughout the 1960s and 70s, the company continued to further improve its technologies, but it was the introduction of the first THEN AIRFLOW system at ITMA 1983 in Milan which significantly boosted the company’s fortunes, representing a milestone in the development of dyeing machines.

Prior to this, the dyeing of just one kilo of fabric required around 150 litres of water and THEN’s AIRFLOW system, invented by engineer Wilhelm Christ and colleagues, drastically reduced the requirement to between just 35-40 litres. Instead of the traditional dye liquor used for hydraulic fabric transport it efficiently distributed much smaller amounts of dye liquor via aerosol. This technology has subsequently been further developed in successive machine models and has made an enormous impact on sustainable dyeing operations.

Now, as FONG’S EUROPE, the company continues to innovate, and at ITMA 2019 is showcasing the THEN SMARTFLOW TSF hydraulic high temperature dyeing machine, designed to achieve the lowest possible energy and water consumption rates available on the market for jet dyeing.

The company has a number of patents pending on the innovative new features of this machine, including the SMARTFLOW’s fabric transport design. This is based on a smart, winchless fabric transport system which eliminates the need for a loading rope, and a circular plaiter with programmable rotation speeds which provides full filling of the drop zone.

Its newly-developed nozzles and reel-less transport, in combination with smart controlled circular plaiting and variable chamber adjustment, provide even fabric treatment without entanglements and the highest loading capacity with the lowest kier volume

“Further developments, including the new THEN AIRFLOW PLUS system with a round design are in the development pipeline and will once again result in further reductions in power consumption without sacrificing performance,” says FONG’s Europe Sales Director Richard Fander. “Similar innovations are being made to our hydraulic long shape machine, the THEN SUPRATEC LTM. The ability to transport fabrics with reduced tension and without the need for a transport winch which is being introduced on all of our recent machines will allow new fabrics to be created and further increase the efficiency of textile finishing.

Fong’s Europe will be at stand D101 in Hall 2 at ITMA 2019.

More information:
Fong’s Europe GmbH
Source:

AWOL Media

print close
more
(c) CHOMARAT
04.03.2019

Chomarat Carbon Reinforcements at JEC WORLD 2019

Composite reinforcement specialist Chomarat will exhibit its latest woven and multiaxial carbon fibre reinforcements at JEC World 2019. "Prepregs are used in the most demanding markets, such as aerospace or the automotive industry. Due to their high performance, Chomarat’s carbon fabrics are highly considered by prepreggers. Compared to standard solutions, the multiaxial reinforcements developed by the group offer Chomarat’s converter customers significant productivity gains. With its production sites in France, Asia and the United States, Chomarat is able to supply its customers and guarantee the same high level of quality in all countries," explains Group Managing Director Michel Cognet.

Composite reinforcement specialist Chomarat will exhibit its latest woven and multiaxial carbon fibre reinforcements at JEC World 2019. "Prepregs are used in the most demanding markets, such as aerospace or the automotive industry. Due to their high performance, Chomarat’s carbon fabrics are highly considered by prepreggers. Compared to standard solutions, the multiaxial reinforcements developed by the group offer Chomarat’s converter customers significant productivity gains. With its production sites in France, Asia and the United States, Chomarat is able to supply its customers and guarantee the same high level of quality in all countries," explains Group Managing Director Michel Cognet.

C-WEAVE™ - THE QUALITY AND RELIABILITY BENCHMARK
In just a few years, prepreggers have come to consider Chomarat's C-WEAVE™ carbon-fibre fabrics as a benchmark for surface-finish quality and processability.
The reinforcement contributes to productivity and reliability during the prepregging process. Helen Doughty, Director at SHD Composites, testifies: “The consistent high quality of C-WEAVE™ has been a key part of SHD Composite Materials continued success and growth.”
"Prepreg users often manufacture Class A surface parts for demanding applications, and they need excellence and reproducibility," explains Chomarat’s Prepreg Market Manager Ulrike Salmon.

C-PLY™: GOING FURTHER WITH CARBON MULTIAXIALS
The advantages of multi-axial reinforcements are now well established - oriented axes, absence of resin-rich areas allowing a high fibre content, and improved mechanical tensile and/or bending performance thanks to the non-crimp fibres.
By developing its C-PLY™ range, Chomarat further demonstrates that multiaxials are a real asset in terms of performance and appearance. "Chomarat strives to minimize marking on parts and to optimize surface quality through fibre spreading and the use of suitable stitches. C-PLY™ can also integrate aesthetic functions by using the assembly seam as a graphic design", continues Ulrike Salmon.
These new advantages are important for the automotive, sports-equipment and consumer-electronics markets, which seek to combine premium quality and productivity.

 

(c) CHOMARAT
More information:
Chomarat, Altus Group, Carboncast CHOMARAT
Source:

AGENCE APOCOPE

print close
more
Representatives of FM Global Management and Beaulieu Fibres International at the Award ceremony on February 20, 2019. (c) Beaulieu International Group
Representatives of FM Global Management and Beaulieu Fibres International at the Award ceremony on February 20, 2019.
article as PDF
22.02.2019

Beaulieu Fibres awarded FM Global “Highly Protected Risk” (HPR) status

  • HPR is the highest status a plant can achieve for fire risk prevention and protection
  • The site Beaulieu Fibres International is the fourth in the Beaulieu International Group to reach HPR status
  • Underlines Group’s commitment to risk prevention at B.I.G. sites & to reinforcing our strong business contingency plan

Beaulieu Fibres International, one of the leading polyolefin staple fibre producers, is pleased to announce the achievement of Highly Protected Risk (HPR) status for its production site in Wielsbeke, a designation that means a facility meets the highest industry standards for property protection.

HPR status was awarded by FM Global, Beaulieu International Group’s (B.I.G.) industrial property and business interruption insurer for the past three years. The company offers B.I.G a unique concept that supports the Group in reducing its exposure to loss and increasing its business resilience. A dedicated worldwide team of engineers focuses on providing assistance and protection of its assets, helping the Group to achieve a higher level of risk protection.

  • HPR is the highest status a plant can achieve for fire risk prevention and protection
  • The site Beaulieu Fibres International is the fourth in the Beaulieu International Group to reach HPR status
  • Underlines Group’s commitment to risk prevention at B.I.G. sites & to reinforcing our strong business contingency plan

Beaulieu Fibres International, one of the leading polyolefin staple fibre producers, is pleased to announce the achievement of Highly Protected Risk (HPR) status for its production site in Wielsbeke, a designation that means a facility meets the highest industry standards for property protection.

HPR status was awarded by FM Global, Beaulieu International Group’s (B.I.G.) industrial property and business interruption insurer for the past three years. The company offers B.I.G a unique concept that supports the Group in reducing its exposure to loss and increasing its business resilience. A dedicated worldwide team of engineers focuses on providing assistance and protection of its assets, helping the Group to achieve a higher level of risk protection.

The Beaulieu Fibres International site produces high performance fibres for a large variety of applications and market segments. It scored exceptionally well in its FM Global assessment which focused on aspects including fire protection, protection against natural hazards, mechanical breakdown of machinery, cyber risks and consequent business interruption.

Its overall risk mark of 83 ranks it within the top 25% of its industry for fire risk prevention and protection.

Commenting on the Award, Maria Teresa Tomaselli, Global Sales Director Fibres, said: “This HPR fibre production site reinforces strongly our supply chain security and demonstrates our engagement towards our customers and partners. Our contingency planning and risk management are essential, well-considered elements within our long-term business strategy to demanding sectors such as Automotive, Geotextiles, Flooring industries.”

 

Beaulieu Fibres International Project Team at the Award ceremony on February 20, 2019. (c) Beaulieu International Group Beaulieu Fibres International received the Highly Protected Risk (HPR) Award at a ceremony on February 20, 2019 attended by the maintenance team, and representatives of B.I.G. Management, Beaulieu Fibres International Management and FM Global Management. (c) Beaulieu International Group
More information:
Beaulieu International Group Beaulieu Yarns Beaulieu Fibres International
Source:

Beaulieu International Group

print close
more
(c) BASF
article as PDF
12.11.2018

BASF 3D Printing Solutions presents new products at formnext and announces pioneering strategic alliances for industrial 3D printing

New products for photopolymer and laser sinter printing methods from BASF 3D Printing Solutions GmbH (B3DPS) are on show from November 13 to 16 at Stand F20 in Hall 3.1 at this year’s formnext fair in Frankfurt. The BASF subsidiary is also announcing several new partnerships for the development and distribution of groundbreaking 3D printing solutions and products.

B3DPS has entered into a strategic partnership with the US company Origin, San Francisco, California for the further development of photopolymer printing processes. “Within the framework of an open business model, we are combining BASF’s material know-how with Origin’s expertise in printer software programming and the manufacture of the corresponding hardware,” explained Volker Hammes, Managing Director BASF 3D Printing Solutions GmbH. The collaboration has already shown the first signs of success. Origin has developed a new printing method where BASF’s new Ultracur3D photopolymers can be processed particularly well. The technology offers an optimal combination of a good surface finish and high mechanical stability, while also allowing for high material throughput.

New products for photopolymer and laser sinter printing methods from BASF 3D Printing Solutions GmbH (B3DPS) are on show from November 13 to 16 at Stand F20 in Hall 3.1 at this year’s formnext fair in Frankfurt. The BASF subsidiary is also announcing several new partnerships for the development and distribution of groundbreaking 3D printing solutions and products.

B3DPS has entered into a strategic partnership with the US company Origin, San Francisco, California for the further development of photopolymer printing processes. “Within the framework of an open business model, we are combining BASF’s material know-how with Origin’s expertise in printer software programming and the manufacture of the corresponding hardware,” explained Volker Hammes, Managing Director BASF 3D Printing Solutions GmbH. The collaboration has already shown the first signs of success. Origin has developed a new printing method where BASF’s new Ultracur3D photopolymers can be processed particularly well. The technology offers an optimal combination of a good surface finish and high mechanical stability, while also allowing for high material throughput.

B3DPS is working together with Photocentric, a manufacturer of 3D printers and their corresponding software and materials, on the development of new photopolymers and large-format photopolymer printers for mass production of functional components. Based in Peterborough, UK and Phoenix, USA, Photocentric has developed and optimized the use of LCD screens as image generators for its own printing systems. The two partners plan to offer the industry 3D printing solutions that replace parts of traditional manufacturing processes such as injection molding for small series, as well as enabling the production of large components.

The objective of the cooperation with Xunshi Technology, a Chinese printer manufacturer headquartered in Shaoxing, and operates in USA under the name Sprintray, will be opening new fields of application in 3D printing for the Ultracur3D product range of B3DPS.

Ultracur3D specialties for photopolymer printing processes
B3DPS has grouped well-established and new photopolymers designed for the respective 3D printing processes under the brand name Ultracur3D. BASF has developed unique raw materials for its new products that enable special part properties.
“Our Ultracur3D portfolio enables us to offer customers various UV-curable materials for 3D printing that provide far better mechanical properties and higher long-term stability than most available materials,” explained András Marton, Senior Business Development Manager at B3DPS. He added: “These materials have been developed for functional components that are subject to high stress.”

Expansion of distribution network for filaments
Innofil3D, a subsidiary of B3DPS, is entering into a partnership with Jet-Mate Technology, based in Tjanjin, China, for the distribution of plastic filaments in China. In parallel, a distribution agreement has been concluded with M. Holland in Northbrook, USA for the distribution of filaments in USA. “Since the USA is the largest market for filaments, we intend to strengthen our activities there,” said Jeroen Wiggers, Business Director 3DP Solutions for Additive Extrusion at B3DPS, adding: “Asia is another important market for us. We will be developing further distribution channels there and putting our Ultrafuse filaments on the Asian market in 2019.”

BASF’s portfolio of filaments for 3D printing are comprised of two categories; the well-established Innofil3D filaments based on generic polymers for conventional applications and polymer-based Ultrafuse filaments for advanced formulations used in demanding technical applications. One of the broadest filament selections on the market, this portfolio covers customer requirements ranging from prototype to industrial-scale production.

SLS: new 3D printing material with fire protection classification
New flame-resistant Ultrasint Polyamide PA6 Black FR meets UL94 V2 fire protection standards and is a new material class for use in selective laser sintering (SLS) processes, distinguished by high stiffness and thermal stability. In cooperation with one of the global leaders of public transportation vehicles, B3DPS has developed new components that meet vehicle fire protection requirements. “Together with our partner, we are currently producing prototypes, spare parts, and small series components, and are working to further improve flame resistance to meet additional certification specifications,” explained Hammes.
BASF introduced Ultrasint Grey PA6 LM X085 at AMUG this spring and now is followed by another product on show at formnext. Ultrasint PA6 Black LM X085 is based on polyamide 6, and can be processed at 175-185 degrees Celsius therefore making it suitable for most current SLS machines.

B3DPS adds polypropylene to its 3D printing portfolio
Through the acquisition of Advanc3D Materials GmbH in July 2018, B3DPS has expanded its range with numerous materials for use on laser sinter machines, including polyamide Adsint PA12, Adsint PA11, Adsint PA11CF and Adsint TPU flex 90.
Ultrasint PP is a special highlight. This polypropylene-based product exhibits outstanding mechanical properties and is frequently used in standard industrial production as it offers a good balance between price and performance. Ultrasint PP is distinguished by excellent plasticity, low moisture uptake, and resistance to liquids and gases. Prototypes and small batches can now be produced from the same material as used for traditional serial production. Post treatments such as thermoforming, sealing, and dyeing can be performed after printing.

More information:
BASF 3D printing materials
Source:

BASF 3D Printing Solutions GmbH

print close
more
Donald Mulazzani, Marketing and Business Development Director Garmon Chemicals copia (c) Garmon Chemicals
Donald Mulazzani, Marketing and Business Development Director Garmon Chemicals copia
30.07.2018

Sustainability becomes an integrated path to growth in the new strategy chosen by Garmon Chemicals

  • Product innovations, thought-leadership and the new certifications.
  • A set of strategic green actions, aimed at increasing transparency and traceability in the company and throughout the industry.

Garmon Chemicals relaunches its commitment to an increasingly green and transparent use of chemicals. The new goal for the company, which in January 2018 has become part of the US Kemin Industries group, is to embark on an actual journey towards sustainability, integrating product innovation with increasingly distinctive strategic actions.

There are three main innovations spearheading Garmon’s commitment. The partnership with the ground-breaking project Alliance for Responsible Denim in the exclusive workshop “Doctor Visits”, held in London June 12. The new ISO 14001:2015 and ISO 9001:2015 process certifications.  The innovative “Stretch Care” collection which features a whole package of eco-compatible solutions, specific for finishing in the world of stretch fabrics.

  • Product innovations, thought-leadership and the new certifications.
  • A set of strategic green actions, aimed at increasing transparency and traceability in the company and throughout the industry.

Garmon Chemicals relaunches its commitment to an increasingly green and transparent use of chemicals. The new goal for the company, which in January 2018 has become part of the US Kemin Industries group, is to embark on an actual journey towards sustainability, integrating product innovation with increasingly distinctive strategic actions.

There are three main innovations spearheading Garmon’s commitment. The partnership with the ground-breaking project Alliance for Responsible Denim in the exclusive workshop “Doctor Visits”, held in London June 12. The new ISO 14001:2015 and ISO 9001:2015 process certifications.  The innovative “Stretch Care” collection which features a whole package of eco-compatible solutions, specific for finishing in the world of stretch fabrics.

In partnership with Alliance for Responsible Denim for the “Doctor Visits” workshop
On June 12, in London, the stage was set for “Doctor Visits” an event-workshop organized by Alliance for Responsible Denim focusing on the dissemination and promotion of best practices for sustainable manufacturing. The meeting was dedicated to six selected denim brands, which had a chance to meet the greatest experts in the finishing of indigo fabric.

Garmon Chemicals made available its inimitable experience as technical partner for finishing, as well as conducting team sessions with the Jeanologia staff, a leading company for eco-sustainable technological solutions. The six brands brought the finishing recipes of their Never out of Stock styles, to receive support and recommendations from the experts about the most innovative alternatives in terms of sustainability. The goal was to show the brands new possibilities to migrate towards more responsible finishing, improving their recipes as well. This was a way to reaffirm how ecodriven innovations can also increase finished product quality.
 
The new ISO certifications: increasingly high standards
Garmon Chemicals is also pleased to announce that it has been awarded two important certifications for compliance with ISO international standards as regards safety, reliability and quality. Reference is made here to ISO 9001:2015, a certification which sets international criteria for quality management systems, and most notably, to ISO 14001:2015, a standard acknowledged worldwide stipulating all requirements for an environmental management system. This certification, in particular, helps organizations improve their environmental management performance levels through a more efficient use of resources as well as by reducing production waste. Indeed ISO 14001:2015 mandates that an organization should take into account all aspects relevant to its core business. Amongst assessed parameters there are: air pollution, managing water resources and discharge, waste management, soil contamination, mitigation and adjustment to climate change, as well as an efficient use of resources.

These certifications, once again, provide evidence of the constant commitment on the part of Garmon for an increasingly sustainable use of chemicals, aimed at truly reducing its impact on humans and the environment.
    
A commitment which comes to life in the new “Stretch Care” collection
Introduced on the occasion of the Kingpins exhibition in April 2018, the new “Stretch Care” collection is a line of products completely dedicated to enhancing the qualities and performance of stretch fabrics. The special formulations developed for this line, with their cutting-edge raw materials, are especially suited for treatments with a high eco-compatibility rate; at the same time they optimize the production process. It is worth mentioning in particular the innovative Geopower NPS (= no pumice stone), a compound which helps eliminate pumice stone from denim washings, thus reducing environmental costs and impacts. Another ground-breaking product is Avol Oxy White, the innovative bleaching agent designed to achieve localized effects on denim. Thanks to its composition it is an ecologically advanced product whose environmental impact has been reduced to a minimum, a real challenge to the use of potassium permanganate which tends to be pervasively used as part of industrial processes.

“We firmly believe in developing sustainable chemistry” – concludes Donald Mulazzani, Marketing and Business Development Director at Garmon Chemicals – “not only in terms of product, but also as evidence of our responsible approach on several levels. In this way, we want to contribute to disseminating what will need to be the best practices in the future, for the whole industry”.

Stretch-Care-collection (c) Garmon Chemicals The-Italian-Job---Research-&-Design-studio-entirely-based-on-Garmon's-chemistry (c) Garmon Chemicals
More information:
Garmon
Source:

Menabò Press office for Garmon Chemicals

print close
more
Bally Logo
26.07.2018

Bally Completes its Executive Team

Bally, the historic Swiss luxury brand is pleased to announce the appointment of two key figures to its executive team, completing the process of strategic redevelopment begun last year with the transfer of the Creative, Merchandising and Marketing offices from London to its new showroom in Milan.

Effective immediately, Eva Quirrenbach joins Bally as Chief Marketing Officer following a term in New York as Vice President of Global Brand Marketing at Tory Burch, having previously occupied strategic roles within the Tod’s Group in both Italy and the United States. Eva is a recognised expert in all aspects of international branding and marketing within the luxury sector, and with her proven understanding of consumer behaviour, she played an integral role in the development and acceleration of the digital footprint and in supporting global brand development at Tory Burch.

Bally, the historic Swiss luxury brand is pleased to announce the appointment of two key figures to its executive team, completing the process of strategic redevelopment begun last year with the transfer of the Creative, Merchandising and Marketing offices from London to its new showroom in Milan.

Effective immediately, Eva Quirrenbach joins Bally as Chief Marketing Officer following a term in New York as Vice President of Global Brand Marketing at Tory Burch, having previously occupied strategic roles within the Tod’s Group in both Italy and the United States. Eva is a recognised expert in all aspects of international branding and marketing within the luxury sector, and with her proven understanding of consumer behaviour, she played an integral role in the development and acceleration of the digital footprint and in supporting global brand development at Tory Burch.

“Eva is an excellent addition to the Bally team. The combination of a consolidated experience and understanding of luxury brands along with her background driving the strategic development of successful global projects make her the ideal leader to drive Bally's commitment to unified commerce on a global level".
Frédéric De Narp, Bally Group CEO

Bally has moved to a three-pronged regional strategy and as such is also pleased to announce the promotion of Silvia Onofri to a new role as CEO for the EMEA region, in addition to her current role as Vice President of Global Wholesale. During her time in Bally, Silvia has obtained outstanding results entering top tier multi-brand doors around the world and increasing Bally's footprint in Travel Retail to make the brand a global leader in the field.

Silvia has extensive experience in the global fashion and luxury industry, having first joined the Bally team 10 years ago, following key marketing roles in Bulgari.

“Silvia has the unique benefit of intimately understanding the Bally brand and it’s DNA, and having proven experience in forging new relationships with the world’s leading retailers and their customers. With this invaluable expertise in hand, I am confident that she will infuse the EMEA Retail division with enthusiasm, professionalism and unique market insights to take Bally to the next level in these crucial markets” -
Frédéric De Narp.

The arrival of Eva Quirrenbach and the promotion of Silvia Onofri are part of Bally Group CEO Frédéric de Narp’s ongoing strategic vision to infuse Bally’s prestigious brand identity with heightened dynamism, appeal and allure.
Both roles report directly to Bally’s Group CEO, Frederic de Narp.

Eva Quirrenbach (c) Bally - Eva Quirrenbach Silvia Onofri (c) Bally - Silvia Onofri
More information:
Bally
Source:

NETWORK PUBLIC RELATIONS GMBH

print close
more
28.06.2018

Kooperation von Borealis und Henkel erzielt Kunststoffflasche und Auftragsdüse zu 100% aus Post-Consumer-Rezyklaten

Verpackungslösung aus 100% Kunststoffrezyklaten liefert weitere Bestätigung für Kreislaufwirtschaft
Borealis, ein führender Anbieter innovativer Lösungen für die Bereiche Polyolefine, Basischemikalien und Pflanzennährstoffe, gibt den erfolgreichen Marktstart einer neuen Verpackungslösung bekannt, die zur Gänze aus Post-Consumer-Rezyklaten (PCR, aus Haushaltsabfall hergestellte Kunststoffe) produziert wird. Diese nachhaltige Verpackungslösung wurde in enger Zusammenarbeit mit dem deutschen Produzenten von Konsum- und Industriegütern Henkel sowie zwei weiteren Partnern aus der Wertschöpfungskette entwickelt und ist ein weiterer Beweis dafür, wie mtm plastics GmbH, ein Teil der Borealis Gruppe, dabei hilft, die Eignung von Kunststoffen für die Kreislaufwirtschaft zu verbessern. Die Einführung dieser Verpackungslösung ist von wesentlicher Bedeutung für die Konsumgüterindustrie: ihre Robustheit unterstreicht, dass sich Kunststoffrezyklate in der Tat für eine Vielzahl anspruchsvoller Verpackungsanwendungen eignen – in diesem Fall für eine bekannte Klebstoffmarke von Henkel.

Verpackungslösung aus 100% Kunststoffrezyklaten liefert weitere Bestätigung für Kreislaufwirtschaft
Borealis, ein führender Anbieter innovativer Lösungen für die Bereiche Polyolefine, Basischemikalien und Pflanzennährstoffe, gibt den erfolgreichen Marktstart einer neuen Verpackungslösung bekannt, die zur Gänze aus Post-Consumer-Rezyklaten (PCR, aus Haushaltsabfall hergestellte Kunststoffe) produziert wird. Diese nachhaltige Verpackungslösung wurde in enger Zusammenarbeit mit dem deutschen Produzenten von Konsum- und Industriegütern Henkel sowie zwei weiteren Partnern aus der Wertschöpfungskette entwickelt und ist ein weiterer Beweis dafür, wie mtm plastics GmbH, ein Teil der Borealis Gruppe, dabei hilft, die Eignung von Kunststoffen für die Kreislaufwirtschaft zu verbessern. Die Einführung dieser Verpackungslösung ist von wesentlicher Bedeutung für die Konsumgüterindustrie: ihre Robustheit unterstreicht, dass sich Kunststoffrezyklate in der Tat für eine Vielzahl anspruchsvoller Verpackungsanwendungen eignen – in diesem Fall für eine bekannte Klebstoffmarke von Henkel.

Zusammenarbeit entlang der Wertschöpfungskette bringt Kunststoffflasche und Düse aus 100% PCR-Material auf den Markt
Im Jahr 2016 erwarb Borealis den führenden deutschen Recycler mtm plastics GmbH, der damit Mitglied der Borealis Group wurde. Indem sie das Wissen aus ihren jeweiligen Fachbereichen sowie ihre jahrzehntelange Erfahrung als Hersteller neuwertiger Polyolefine bzw. als „Upcycler“ nutzen, erforschen Borealis und mtm plastics mit vereinten Kräften neue Wachstumschancen.

Eine Erfolgsgeschichte, die aus dieser Reise hervorgegangen ist, stellt ein vor kurzem abgeschlossenes Pilotprojekt mit Henkel dar, einem weltweit führenden Anbieter für Klebstoffe, Dichtstoffe und funktionale Beschichtungen. Die Unternehmen arbeiteten an der Entwicklung einer neuen Verpackungslösung auf Basis von Recyclingmaterial für Flaschen und Verschlüsse des „Made at Home“-Allzweckklebers, den Henkel unter seiner bekannten Marke „Pattex“ vertreibt. Das Ziel war es, neuwertiges Kunststoffmaterial, das üblicherweise für diese Art von Verpackung verwendet wird, durch ein rezyklatbasiertes Harz zu ersetzen. Dieses musste allerdings die unterschiedlichen Anforderungen an Materialien, die zur Verpackung von Klebstoffprodukten eingesetzt werden, erfüllen.

Nach der umfassenden gemeinsamen Anwendungsentwicklung wurde eine neue Flasche aus dem unternehmenseigenen Produkt Purpolen® PE entwickelt, einem hochwertigen Polyethylen-Regranulat, das von mtm am Standort in Niedergebra, Deutschland hergestellt wird. Die Produktion der Flaschen übernahm ein Partner aus der Wertschöpfungskette, KKT Kaller-Kunststofftechnik GmbH, ein Kunststoffverarbeiter aus Deutschland. Für die drei einzelnen Bestandteile der verstellbaren Auftragsdüse, die sowohl für filigranes als auch für großflächiges Kleben verwendet werden kann, wurde Purpolen® PP ausgewählt, ein hochwertiges Polypropylen-Regranulat, das von mtm produziert wird. Die Spritzdüsen wurden vom deutschen Kunststoffkomponentenhersteller bomo trendline Technik GmbH gefertigt.

Die neue Pattex „Made at Home“-Verpackungslösung bestand zahlreiche umfassende Anwendungstests, wie unter anderem einen dreimonatigen Lagertest sowie unterschiedliche Tests der mechanischen Eigenschaften. Das Produkt wurde im Jahr 2018 im europäischen Markt eingeführt.

„Als Hersteller neuer Polyolefine ist Borealis begeistert, zu den Pionieren zu zählen, die Kunststoffrezyklate in neuen Anwendungen verwenden“, erklärt Günter Stephan, Head of Borealis Circular Economy Solutions. „Auch wenn die Steigerung der Zirkularität von Kunststoffen immer mehr an Bedeutung gewinnt, müssen wir innerhalb unserer Branche nach wie vor den Beweis dafür erbringen, dass die Verwendung von Rezyklaten – und auch von 100%-PCR – sogar für anspruchsvolle Anwendungen eine geeignete und effektive Option darstellt. Dank der erfolgreichen Kooperation mit unseren Partnern aus der Wertschöpfungskette Henkel, KKT und bomo verhelfen wir Kunststoffen zu einem zweiten Leben und bringen sie damit einen Schritt näher an das Ziel einer Kreislaufwirtschaft für Kunststoffe.“

„Unser Bekenntnis zu einer Führungsrolle im Bereich Nachhaltigkeit ist tief in den Werten unseres Unternehmens verankert“, erklärt Matthias Schaefer, Project Manager Global Packaging Engineering bei Henkel Adhesive Technologies. „Wir gehen in unserer Branche mit neuen Nachhaltigkeitsstrategien für Verpackungen voran. Deshalb haben wir unseren Pattex Made-at-Home Alleskleber als Pilotprojekt identifiziert, um den Einsatz von Rezyklaten anstelle von Neukunststoffen zu erforschen. Die konstruktive Zusammenarbeit mit unseren Partnern bestätigt die Eignung von 100%-PCR-Materialien für ein Klebstoffprodukt wie „Made at Home“. Damit unterstreichen wir unsere Führungsrolle im Bereich Nachhaltigkeitsbereich auch im Markt für Konsumentenklebstoffe.“

More information:
Pattex PCR-Material Klebstoff
Source:

Borealis Group

print close
more
28.06.2018

COOPERATION BY BOREALIS AND HENKEL PRODUCES PLASTIC BOTTLE AND NOZZLE COMPOSED 100% OF POST-CONSUMER RECYCLED MATERIAL

Packaging solution made of 100% plastic recyclate delivers circular economy proof point
Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces the successful launch of a new packaging solution produced entirely with post-consumer recycled (PCR) material. Developed in close collaboration with the German consumer and industrial goods company Henkel and two additional value chain partners, this truly sustainable packaging solution is further evidence of how mtm plastics GmbH, a member of the Borealis Group, is helping increase the circularity of plastics. The launch has significance for the consumer goods industry because the robustness of this new packaging solution provides further evidence that plastic recyclate is indeed suitable for a variety of demanding packaging applications, in this case a popular adhesive brand marketed by Henkel.

Value chain collaboration yields plastic bottle and nozzle composed of 100% PCR material

Packaging solution made of 100% plastic recyclate delivers circular economy proof point
Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces the successful launch of a new packaging solution produced entirely with post-consumer recycled (PCR) material. Developed in close collaboration with the German consumer and industrial goods company Henkel and two additional value chain partners, this truly sustainable packaging solution is further evidence of how mtm plastics GmbH, a member of the Borealis Group, is helping increase the circularity of plastics. The launch has significance for the consumer goods industry because the robustness of this new packaging solution provides further evidence that plastic recyclate is indeed suitable for a variety of demanding packaging applications, in this case a popular adhesive brand marketed by Henkel.

Value chain collaboration yields plastic bottle and nozzle composed of 100% PCR material
In 2016, Borealis acquired leading German recycler mtm plastics GmbH, which is now a member of the Borealis Group. By leveraging their respective areas of expertise and decades of experience as a virgin polyolefins producer and “upcycler”, respectively, Borealis and mtm plastics are exploring new growth opportunities with joint forces.

A success story originating from this exploration is a recently completed pilot project with Henkel, the global leader for adhesives, sealants and functional coatings. The companies have worked to develop a new packaging solution based on recycled material for the Made-at-Home all-purpose glue bottle and cap, which Henkel is marketing under its well-known Pattex brand.  The aim was to replace the virgin plastic material traditionally used for this packaging with a recyclate-based resin. The resin, however, had to fulfil the diverse material demands for packaging of an adhesive product.

After extensive and joint application development, a new bottle was developed with the proprietary mtm product Purpolen® PE, a high-quality polyethylene regranulate produced by mtm at its facilities in Niedergebra, Germany. Value chain partner KKT Kaller Kunststoff Technik GmbH, a plastics processor also based in Germany, manufactured the bottles. For the three separate components of the adjustable applicator nozzle, which is used for both filigree and wide-area gluing, high-quality Purpolen® PP polypropylene regranulate produced by mtm was identified as the ideal solution. German plastic components manufacturer bomo trendline Technik GmbH produced the applicator nozzles.

The new Pattex Made-at-Home packaging solution successfully passed extensive application tests, including a three-month storage test and other tests of mechanical properties. It was launched on the European market in 2018.

“Our commitment to leadership in sustainability is deeply embedded in our companies´ values,” explained Matthias Schaefer, Project Manager for Global Packaging Engineering at Henkel Adhesive Technologies. “We are at the forefront of the industry when it comes to new sustainability strategies in packaging.  Thus, we identified Pattex Made-at-Home as a candidate for exploring the use of recyclate instead of virgin plastics. This constructive collaboration with our partners proves the viability of 100% PCR material for an adhesive product like Made-at Home. It also underscores our efforts at Henkel to drive leadership in sustainability in the consumer goods sector.”

“As a virgin polyolefins producer, Borealis is thrilled to be among the pioneers in using plastic recyclate in new applications,” says Günter Stephan, Head of Borealis Circular Economy Solutions. “Even though momentum is gaining in the drive to increase the circularity of plastics, we still need to prove without a doubt within the industry that using recyclates – and even 100% PCR – is a suitable and effective option, even for demanding applications. Thanks to this successful value chain cooperation with our partners Henkel, KKT and bomo, we are giving plastics a second life and are thus one step closer to the goal of a more circular economy of plastics.”
 

More information:
Pattex Sustainability polyolefins post-consumer recycled material
Source:

Borealis Group

print close
more
Ternua Group chooses Lectra Fashion PLM 4.0 (c) Tenua Group
21.03.2018

Ternua Group chooses Lectra Fashion PLM 4.0

  • Spanish outdoor and sportswear market leader expands international presence thanks to Lectra’s latest product lifecycle management solution

Ismaning/Paris – Lectra, the technological partner for companies using fabrics and leather, is pleased to announce that the Ternua Group, a world-renowned Spanish outdoor clothing and sportswear group, has chosen Lectra Fashion PLM 4.0 to increase their geographical presence by improving global teamwork.

Founded in 1994, the Ternua Group has achieved worldwide success by promoting adventure through respect for nature, producing sustainable technical clothing for outdoor sports enthusiasts worldwide. The group’s strong commitment to the environment is shown through their R&D that focuses on developing their own fabric by using eco-friendly materials such as organic cotton and recycled down.

Today, the group’s portfolio includes three brands Ternua, Astore and Lorpen, currently exporting to more than 50 countries, with operations in Europe, America and Asia. Compounding this global success, the ambitious group plans to penetrate more markets across the globe.

  • Spanish outdoor and sportswear market leader expands international presence thanks to Lectra’s latest product lifecycle management solution

Ismaning/Paris – Lectra, the technological partner for companies using fabrics and leather, is pleased to announce that the Ternua Group, a world-renowned Spanish outdoor clothing and sportswear group, has chosen Lectra Fashion PLM 4.0 to increase their geographical presence by improving global teamwork.

Founded in 1994, the Ternua Group has achieved worldwide success by promoting adventure through respect for nature, producing sustainable technical clothing for outdoor sports enthusiasts worldwide. The group’s strong commitment to the environment is shown through their R&D that focuses on developing their own fabric by using eco-friendly materials such as organic cotton and recycled down.

Today, the group’s portfolio includes three brands Ternua, Astore and Lorpen, currently exporting to more than 50 countries, with operations in Europe, America and Asia. Compounding this global success, the ambitious group plans to penetrate more markets across the globe.

The group is implementing Lectra Fashion PLM 4.0 into their entire production process. Specifically developed to help fashion companies navigate the digital era, this modular and user-friendly solution will help the Ternua Group centralize and store information coming from their brands by digitalizing their supply chain. This will connect all teams involved in the design-to-production process, regardless of geographic location. Team members will also be able to comm unicate better with external suppliers, access accurate information and keep track of every collection’s development progress. The group can hence speed up the entire production process and help their brands deliver their collections to markets all over the world on time.

“We manage our design and product development processes in-house but outsource our production in Europe, north of Africa and Asia. For our business to expand globally, we need to go fully digital. By having a system that consolidates and standardizes data coming from all supply chain actors across the world, we can respond faster to consumer demand,” explains Aitor Barinaga, Chief Operations Officer, Ternua Group. “We have assessed all other vendors—and Lectra Fashion PLM 4.0 is clearly the winner. It has the ability to fully integrate all processes and improve communication and teamwork across all departments through sound data management. We are more than happy to have a trusted partner as Lectra for such an ambitious project.”

“Ternua Group is constantly pushing the boundaries of innovation. This is shown through their desire to help customers achieve their personal best by providing them with high-performance technical wear that is also environmentally friendly. We are thrilled to embark on this new journey with the Ternua Group, and we are confident that our solution and expertise will help them get their collections out to new markets on time,” says Rodrigo Siza, Managing Director, Spain and Portugal, Lectra.

More information:
Ternua Group Lectra, PLM Nachhaltigkeit
Source:

Lectra

print close
more
20th anniversary of the JEC Innovation Awards (c) GROUPE JEC - Thierry-Alain TRUONG
07.03.2018

20th anniversary of the JEC Innovation Awards

  • JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

  • JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

“JEC Group supports innovation. In 1998, it created the first award dedicated to composites, as a way to promote and reward the sector’s champions. Thanks to the work of JEC Group’s teams, the program has become an international benchmark. Each year, we receive more than a hundred applications from all over the world. Selection is now based on criteria like the level of involvement of the innovation’s partners in the value chain, the technical nature of the innovation, or its commercial applications,” explains JEC Group President & CEO Frédérique Mutel.
A new feature this year is that the jury revealed the winners during the ceremony, and the public could choose their favorite innovation before, during, and after the ceremony. So there is still time to vote! Votes are opened until Thursday March 8th, 5pm http://innovationawards.jec-world.events
Did you miss the ceremony?

11 AWARD WINNERS:
AEROSPACE APPLICATION
Winner:
AeroComposit, JSC (Russia) and its partner Solvay (United Kingdom)

  • Infusion technology for an aircraft wing

The use of infusion technology to manufacture primary structural components for an aircraft wing. The technology makes it possible to create extra-long, integrated composite structures with complex aerodynamic shapes.

AEROSPACE PROCESS 
2 tied winners!
Winner: Airbus (Germany) and its partners, BMW Group (Germany), Technical University of Munich (TUM) (Germany), Neue Materialien Bayreuth GmbH (Germany), Werkzeugbau Siegfried Hofmann GmbH (Germany), BASF SE (Germany), Foldcore GmbH (Germany), Neenah Filtration (Germany) and SGL Carbon GmbH (Germany)

  • Complex structural applications for MAI sandwich technology

Cost-effective production of a complex 2.5D structure made of thermoplastic composite sandwich, with very short cycle times: under 5 minutes for aerospace materials and 2.5 minutes for automotive materials.

Winner: M. Torres Diseños Industriales SAU (Spain)
Moldless process to manufacture one-piece parts
A new manufacturing process for oversized one-piece reinforced composite structures, without requiring the use of complete molds.

AUTOMOTIVE APPLICATION
Winner: Ford Werke GmbH (Germany) and its partners, Gestamp (United Kingdom), GRM Consulting (United Kingdom) and University of Warwick (United Kingdom)

  • Lightweight composite automotive suspension part

Structural suspension part made of lightweight composite, using a brand-new patented process for prepreg/SMC/steel overmolding that was designed using a new computer-aided engineering (CAE) technology.

AUTOMOTIVE PROCESS
Winner: Audi AG (Germany) and its partners, Voith Composites GmbH & Co. KG (Germany), Dow Automotive (Switzerland), and Zoltek Corp. (United States)

  • Series production of a rear panel module made of carbon composite

For the first time, the potential of carbon fiber reinforced plastics (CFRP) is used to full advantage in series production with a new rear panel module and cost-effective production technologies.

CONSTRUCTION & INFRASTRUCTURE
Winner: Komatsu Seiren Co., Ltd. (Japan) and its partners, Kanazawa Institute of Technology (Japan) and Nagase ChemteX Corporation (Japan)

  • Cabkoma cable made of CFRTP

Komatsu Seiren has developed a cable made of molded carbon fiber reinforced thermoplastic (CFRTP), using a very cost-effective process that consists in polymerizing a thermoplastic epoxy resin in situ.

MARINE
Winner: Uljanik JSC (Croatia)

  • Composite cargo decks for a vehicle carrier

On the SIEM Cicero, a vehicle carrier with a capacity of 7,000 vehicles, glass-fiber reinforced composites are used for a number of the structures for the cargo decks, thereby considerably reducing the ship’s weight, fuel consumption and CO2 emissions.

RAILWAY
Winner: ELG Carbon Fibre Ltd. (United Kingdom) and its partners, Alstom Transport (United Kingdom), Magma Structures (United Kingdom), the University of Birmingham (United Kingdom), and the University of Huddersfield (United Kingdom)

  • A bogie frame made of optimized lightweight carbon fiber

This project has developed the very first carbon-fiber bogie frame that uses a recycled material, making it possible to overcome the obstacles to a commercial adoption of this type of structure.

SPORTS & LEISURE
Winner: BMW Group (Germany) and its partners EDAG Engineering GmbH (Germany), KraussMaffei Technologies GmbH (Germany), Chr. Karl Siebenwurst GmbH & Co. KG (Germany), TUM-LCC (Germany), Automation W + R GmbH (Germany), and FHG-IGCV (Germany)

  • A modular construction system for the rear swing arm suspension of a motorcycle

A modular system to produce a complex-shape swing arm suspension reinforced with carbon fiber. The system can adjust the mechanical properties on a case-by-case basis, for a competitive cost and weight compared to metal solutions.

SMART CITIES
Winner: MC Materiales Compuestos (Argentina) and its partners, Plaquimet (Argentina), Purcom (Brazil), IS Groupe - Composite Integrity (France), and G12 Innovation (Brazil)

  • The Wet Core Pod composite housing module

The Wet Core Pod is a composite housing module with an industrialization potential that can facilitate the most complex, costly and difficult step in a construction project.

SUSTAINABLE DEVELOPMENT
Winner: Cetim-Cermat (France) and its partner, CETIM (France)

  • “3-in-1” line for producing recycled composites

A modular line that uses an innovative thermomechanical process to make large panels from recycled composites or plastics. The panels are then thermoformed into parts.
 

More information:
JEC Innovation Awards JEC World 2018
Source:

Dorothée David & Marion RISCH, Agence Apocope

print close
more
Trevira CS Stoffwettbewerb 2018 © Trevira GmbH
Trevira CS Stoffwettbewerb 2018
25.01.2018

Trevira's CS Joint Booth at the 2018 Heimtextil trade fair a tremendous succes

At this year's Heimtextil, which took place from 9-12 January in Frankfurt, Trevira impressed visitors with a brand new fair concept. The company worked together with sixteen of its biggest customers to create a joint booth covering 1,305 square metres of Hall 4.2, drawing a large crowd.

Head of Marketing, Anke Vollenbröker, explained, "Thanks to our new approach and booth concept, we were able to present our brand Trevira CS in an open and welcoming manner plus highlight the good relationship we have with our customers."

Trevira CEO Klaus Holz added, "We are really pleased with the very positive feedback we have had from all sides in response to our grand Trevira CS joint booth. We would like to thank everyone who has contributed to the booth's success. The extremely positive market reaction has reassured us that this is a concept we can build on in the future."

At this year's Heimtextil, which took place from 9-12 January in Frankfurt, Trevira impressed visitors with a brand new fair concept. The company worked together with sixteen of its biggest customers to create a joint booth covering 1,305 square metres of Hall 4.2, drawing a large crowd.

Head of Marketing, Anke Vollenbröker, explained, "Thanks to our new approach and booth concept, we were able to present our brand Trevira CS in an open and welcoming manner plus highlight the good relationship we have with our customers."

Trevira CEO Klaus Holz added, "We are really pleased with the very positive feedback we have had from all sides in response to our grand Trevira CS joint booth. We would like to thank everyone who has contributed to the booth's success. The extremely positive market reaction has reassured us that this is a concept we can build on in the future."

A Trevira exhibition formed the centrepiece of the joint booth, showcasing the winning fabrics from the 2018 Trevira CS Creativity Competition, which this year featured "Colour" as its major theme. At the heart of the display, visitors could find out more about Trevira with the help of twelve tablets providing information in a variety of formats, including a staff presentation and a flyer about the new Trevira Sinfineco® brand.

Encircling this core and thereby completing the joint booth concept, sixteen major customers grouped their individual stands around this centrepiece to display their own new Trevira CS collections for residential and contract usage. The customers joining Trevira to create the booth were Baumann Dekor Ges.m.b.H., Engelbert E. Stieger AG, FIDIVI Tessitura Vergnano S.p.A., Georg + Otto Friedrich, Jenny Fabrics AG, Johan van den Acker Textielfabriek B.V., Mattes & Ammann GmbH & Co. KG, Pugi R.G. S.R.L., Spandauer Velours GmbH & Co. KG, SR Webatex GmbH / Getzner Textil AG, Swisstulle AG, Tessitura Mario Ghioldi & C. srl, Torcitura Fibre Sintetiche S.p.A., Torcitura Lei Tsu S.r.l. / Ilcat S.p.A., Vlnap a.s. / Wagenfelder Spinning Group and Wintex S.r.l..

Another major section of the Trevira booth was dedicated to the world of acoustics. Increasingly, customers are (re)discovering textiles as a way to significantly improve the quality of room acoustics, and this part of the booth also attracted numerous visitors.

A special highlight at the joint booth were the Trevira CS sports shoes, worn by Trevira staff as a key element of the brand's trade fair outfit. The shoes are an Adidas Originals Special Edition of the iconic Stan Smith Silhouette, which Adidas manufactured in cooperation with Kvadrat.

In keeping with annual tradition, the new Trevira CS Gold and Silver Club members were announced during the Heimtextil fair. The new members were presented with their awards at a formal ceremony on Tuesday evening (9 January).

Trevira CS Stoffwettbewerb 2018 © Trevira GmbH Individuelle Stände der Trevira CS Kunden auf der Heimtextil 2018 © Trevira GmbH Individuelle Stände der Trevira CS Kunden auf der Heimtextil 2018 © Trevira GmbH Trevira CS Gold Club 2018: Garnanbieter © Trevira GmbH
More information:
Trevira GmbH, Heimtextil 2018, Frankfurt Trevira GmbH Trevira Heimtextil 2018
Source:

Trevira GmbH

print close
more
Lenzing Group with substantial earnings increase in the first nine months of 2017 ©The Lenzing Group
Lenzing Group Vorstand
15.11.2017

Lenzing Group with substantial earnings increase in the first nine months of 2017

  • Revenue up 9.4 percent to EUR 1,726.6 mn
  • EBITDA improvement of 23.9 percent to EUR 397.1 mn
  • Retail bond of EUR 120 mn redeemed – Lenzing with net liquidity as at end of September
  • State-of-the-art application innovation center opened in Hong Kong

Lenzing – The Lenzing Group generated a substantial increase in revenue and earnings in the first nine months of the 2017 financial year compared to the prior-year period. The company is continuing the implementation of its Group strategy sCore TEN in order to further expand the offering of specialty fibers and be even closer to its customers and business partners.

  • Revenue up 9.4 percent to EUR 1,726.6 mn
  • EBITDA improvement of 23.9 percent to EUR 397.1 mn
  • Retail bond of EUR 120 mn redeemed – Lenzing with net liquidity as at end of September
  • State-of-the-art application innovation center opened in Hong Kong

Lenzing – The Lenzing Group generated a substantial increase in revenue and earnings in the first nine months of the 2017 financial year compared to the prior-year period. The company is continuing the implementation of its Group strategy sCore TEN in order to further expand the offering of specialty fibers and be even closer to its customers and business partners.

Consolidated revenue climbed 9.4 percent year-on-year to EUR 1,726.6 mn. This increase is mainly attributable to higher prices for all three fiber generations. Consolidated earnings before tax, depreciation and amortization (EBITDA) rose 23.9 percent to EUR 397.1 mn, corresponding to an EBITDA margin of 23 percent, up from 20.3 percent in the prior-year period. Earnings before interest and tax (EBIT) increased by 34.6 percent to EUR 298.4 mn, resulting in a higher EBIT margin of 17.3 percent (Q1-3 2016: 14 percent). The profit for the period improved by 35.3 percent to EUR 219.3 mn, and earnings per share rose 36 percent to EUR 8.12 per share. In September Lenzing redeemed the retail bond of EUR 120 mn. At the end of the reporting period the Group had net liquidity of EUR 16.9 mn.

“In the first three quarters of 2017, we successfully captured value in a very positive market environment and we continue to implement the sCore TEN strategy with great discipline. The opening of our new application innovation center in Hong Kong is an important step to boost our regional innovation capabilities. We were particularly proud to launch TENCELTM Luxe as a sign of Lenzing’s ongoing commitment to innovation and sustainability”, states Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “After three excellent quarters we are confident to deliver substantially better operating results in 2017 compared to 2016, but at the same time we do expect more headwinds in 2018.”

Focus on customer intimacy

In September 2017, the Lenzing Group opened a new application innovation center (AIC) in Hong Kong, thus setting a further milestone in strengthening its innovation offering to all partners along the value chain. New applications for Lenzing fibers will be developed and tested at the new facility, among them applications for recent innovations such as the TENCELTM Luxe branded lyocell filament, the RefibraTM branded lyocell fiber and the EcoVeroTM branded viscose fiber.

Furthermore, new sales and marketing offices were opened in Turkey and South Korea in the first half of 2017. The direct contact to customers and well-equipped showrooms featuring products made of LenzingTM fibers serve as the basis for providing even better customer support.

Investment program in progress

The Lenzing Group aims to increase the share of specialty fibers as a percentage of revenue to 50 percent by 2020. Following the capacity expansion initiatives in Heiligenkreuz (Austria) and Mobile, Alabama (USA) which are both underway, Lenzing announced its intention to construct the next plant to produce TENCEL® fibers in Thailand.

A new era of sustainable production

In October 2017, the Lenzing Group presented a new product, TENCELTM Luxe, at an exclusive event held in Paris. The TENCELTM Luxe branded filament yarn represents Lenzing’s entry in the filament market. This fiber will support the Lenzing Group’s path towards becoming a true specialty player in the market for botanic materials derived from the sustainable raw material wood.

The launch volumes of TENCELTM Luxe are being produced at the Lenzing site. The basic engineering for a commercial scale plant was commenced.

Outlook
Demand development on the global fiber market remains positive within the context of a generally friendly macroeconomic environment. Lenzing expects wood-based cellulose fibers to grow at an even higher rate than the overall fiber market. After three excellent quarters, the Lenzing Group will achieve an operating result in 2017 that is significantly better than 2016.

For 2018, Lenzing sees a number of somewhat opposing factors that limit visibility regarding fiber price developments. Overall market demand is expected to remain high. However, the Group expects a substantial increase on the supply side, especially for viscose but also for cotton. Price trends for selected key raw materials, especially caustic soda, are difficult to predict. Against this background the Lenzing Group expects a much more challenging market environment for standard viscose during the upcoming quarters.

The above-mentioned development reassures the Lenzing Group in its chosen corporate strategy sCore TEN. The Group initiated its transformation from a volume-oriented viscose player to a value-oriented specialty fiber player at the end of 2015, and will continue the disciplined implementation of its business strategy.

Key Group indicators (IFRS) in EUR mn

 

 

 

 

 

 

 

 

 

 

Lenzing Group with substantial earnings increase in the first nine months of 2017 ©The Lenzing Group Lenzing Group with substantial earnings increase in the first nine months of 2017 ©The Lenzing Group Lenzing Group with substantial earnings increase in the first nine months of 2017 ©The Lenzing Group
More information:
Lenzing Group Fibers
Source:

The Lenzing Group

print close
more
Beaulieu Yarns received the Highly Protected Risk (HPR) Award at a ceremony on November 7, 2017 attended by all staff, and representatives of B.I.G. Management, Beaulieu Yarns Management and FM Global Management. © Beaulieu International Group
Beaulieu Yarns receives HPR Award
08.11.2017

Beaulieu Yarns awarded prestigious FM Global “Highly Protected Risk” (HPR) status for French production site

  • HPR is the highest status a plant can achieve for fire risk prevention and protection
  • The site Ideal Fibres & Fabrics Comines is the second in the Beaulieu International Group to reach HPR status
  • Underlines Group’s commitment to risk prevention at B.I.G. sites & to reinforcing our strong business contingency plan

Wielsbeke, Belgium – Beaulieu Yarns, the global supplier of high-quality polyamide and polypropylene yarns, is pleased to announce the achievement of Highly Protected Risk (HPR) status for its French production site, Ideal Fibres & Fabrics Comines. Awarded by FM Global, HPR designation means a facility meets the highest industry standards for property protection.

  • HPR is the highest status a plant can achieve for fire risk prevention and protection
  • The site Ideal Fibres & Fabrics Comines is the second in the Beaulieu International Group to reach HPR status
  • Underlines Group’s commitment to risk prevention at B.I.G. sites & to reinforcing our strong business contingency plan

Wielsbeke, Belgium – Beaulieu Yarns, the global supplier of high-quality polyamide and polypropylene yarns, is pleased to announce the achievement of Highly Protected Risk (HPR) status for its French production site, Ideal Fibres & Fabrics Comines. Awarded by FM Global, HPR designation means a facility meets the highest industry standards for property protection.

FM Global, Beaulieu International Group’s (B.I.G.) industrial property and business interruption insurer for the past two years, offers a unique concept that supports the Group in reducing its exposure to loss and increases its business resilience. A dedicated worldwide team of engineers focuses on providing assistance and protection of its assets, helping the Group to achieve a higher level of risk protection.

The Ideal Fibres & Fabrics Comines site produces high quality yarns for a large variety of application and market segments including the automotive industry. It scored exceptionally well in its FM Global assessment which focused on aspects including fire protection, protection against natural hazard, mechanical breakdown of machinery and also cyber risks.

Its overall risk mark of 76 ranks it within the top 25% of its industry for fire risk prevention and protection.

Commenting on the Award, Emmanuel Colchen, Global Sales Director Yarns within BU Beaulieu Engineered Products, said: “This HPR yarn production site reinforces strongly our supply chain security and demonstrates our engagement towards our customers and partners. Our contingency planning and risk management are essential, well-considered elements within our long-term business strategy to demanding sectors such as Automotive and Commercial & Residential floor covering contracts.”

Ideal Fibres & Fabrics Comines is the second facility in the Group to attain HPR status, and the very first in Europe. Pinnacle Polymers LLC in the USA also achieved the HPR as a chemical plant, which is a rare achievement within the chemical business. Fire risk prevention is part of the Group’s broader risk management activities. B.I.G. is investing in increasing the level of protection at all B.I.G. plants in order to protect its business continuity.

The divisions of B.I.G. are also implementing a number of safety programmes to raise awareness of workplace safety and to maintain strong safety records.

Karena Cancilleri, Vice President BU Beaulieu Engineered Products, commented: “I am proud of Beaulieu Yarns for achieving the highly-regarded FM Global HPR Award and setting an example for the whole Beaulieu International Group. This positive step reflects the strong commitment of the Engineered Products division and the rest of the Group to improving safety and protecting our workplaces and our production facilities.”

Beaulieu Yarns received the HPR Award at a ceremony on November 7, 2017 attended by all staff, and representatives of B.I.G. Management, Beaulieu Yarns Management and FM Global Management.

Representatives of FM Global Management, B.I.G. Management and Ideal Fibres & Fabrics Project Team at the Award ceremony on November 7, 2017. © Beaulieu International Group Representatives of FM Global Management, B.I.G. Management and Ideal Fibres & Fabrics Project Team at the Award ceremony on November 7, 2017. © Beaulieu International Group Erwin De Deyn, Chief Legal Officer and Vice President at Beaulieu International Group, accepting the Award on behalf of Beaulieu Yarns. © Beaulieu International Group
More information:
Beaulieu International Group HPR Award
Source:

EMG

print close
more
Viyellatex Group Extends Collaboration Agreement with Huntsman for Another Two Years © Huntsman
Huntsman Viyellatex Signing Ceremony
12.10.2017

Viyellatex Group Extends Collaboration Agreement with Huntsman for Another Two Years

  • Huntsman continues to inject its leading edge innovation in bangladesh to support textile industry with sustainable practices

Singapore - In a signing ceremony, Huntsman Textile Effects announced that it has extended the partnership and collaboration agreement with Viyellatex Group for another two years. The agreement will see the Viyellatex Group continuing to use Huntsman as its preferred and sole supplier for industry leading dyes, chemicals and dying auxiliaries. This partnership, now in its 17th year reinforces the recognition of Huntsman as a trusted and preferred supplier for the Viyellatex Group. Under this agreement, Huntsman will support Viyellatex’s Group of mills to streamline operations and optimize processes, train technical staff, and make recommendations to help improve yield and productivity. This strategic cooperation will enable Viyellatex Group to continue to achieve operational excellence.

  • Huntsman continues to inject its leading edge innovation in bangladesh to support textile industry with sustainable practices

Singapore - In a signing ceremony, Huntsman Textile Effects announced that it has extended the partnership and collaboration agreement with Viyellatex Group for another two years. The agreement will see the Viyellatex Group continuing to use Huntsman as its preferred and sole supplier for industry leading dyes, chemicals and dying auxiliaries. This partnership, now in its 17th year reinforces the recognition of Huntsman as a trusted and preferred supplier for the Viyellatex Group. Under this agreement, Huntsman will support Viyellatex’s Group of mills to streamline operations and optimize processes, train technical staff, and make recommendations to help improve yield and productivity. This strategic cooperation will enable Viyellatex Group to continue to achieve operational excellence.

“We are extremely pleased and proud of this continuing partnership with the Viyellatex Group. As a global leader in the transition to a more sustainable textiles sector, we are pleased to join hands with one of the country’s leading exporter of ready-made garments (RMG) and a supplier to leading international brands, commented Chuck Hirsch, Vice President, Sales and Technical Resources, Huntsman Textile Effects. “This cooperation agreement will also help Viyellatex Group to maintain its leading edge in the textile industry by leveraging on Huntsman’s R&D capabilities, innovation and focus on sustainability, while continuing to comply with the stringent requirements of its export customers around the world,” continued Mr Hirsh.

Speaking on the occasion Mr. David Hasanat, Chairman of Viyellatex Group said, “Viyellatex Group is the leading company in the area of sustainable apparel in Bangladesh. This continuing support and technical expertise from Huntsman will help us be more competitive in this increasingly challenging market. It will help us to comply with the stringent product demands from our global customers and better equip us to face challenges from the operational and environmental aspects.” He continues, “Viyellatex Group places strong emphasis on sustainability by minimizing energy usage, adopting waste and water recycling, and using only organic materials and environmentally compliant chemicals and dyes and Huntsman is the perfect partner in this regard as they share this vision.” “We are pleased to be conferred Preferred Supplier Status from Viyellatex Group, partnering with one of the leading apparel groups in Bangladesh” , said Mr. Dheeraj Talreja, Commercial Director - South Asia, Middle East & Africa of Huntsman Textile Effects. “This partnership is a great testament of our customers’ trust and confidence in Huntsman’s quality, proven expertise, products and service delivery,” he continued.

In conjunction with this signing ceremony and as an active supporter of Bangladesh’s textile industry, today Mr Hirsch also hosted a customer seminar for more than 500 customers and prospects in the country’s capital, to provide them with leading edge technologies to help them be more sustainable with competitive value-add to customers.

Huntsman Textile Effects holds regular seminars and workshops and also collaborates with textile mills and apparel manufacturers to adopt new technologies and processes that conserve resources, reduce waste and improve productivity.

Bangladesh’s textile industry is the nation’s largest export sector. The ready-made garment (RMG) sector is worth US$28.14* billion in 2016-2017, with more than 4,300 garment factories employing about 4 million people and accounting for 80.7% of the country’s total exports. To remain internationally competitive, local textile mills and RMG factories increasingly have to demonstrate that they operate in a socially and environmentally sustainable way.

More information:
Huntsman Viyellatex Grouo
Source:

Huntsman

print close
more
Lectra and Faurecia renew their partnership agreement ©lectra
Faurecia Cadillac
26.09.2017

Lectra and Faurecia renew their partnership agreement

  • Lectra contributes to Faurecia Seating Business Group Industry 4.0 readiness and “digital enterprise” transformation initiative

Paris, September 26, 2017 – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the renewal of its partnership with Faurecia through the signing of a global agreement for its Seating Business Group.

The cutting process for the production of seat covers, headrests and interiors is an increasingly strategic part of Faurecia’s Seating activity. Faurecia Seating supplies vehicle complete seats, frames, mechanisms and trim covers to major carmakers worldwide, whose manufacturing processes are gradually evolving toward Industry 4.0.

Faurecia Seating aims to double the production of its existing manufacturing facilities by reinforcing operations with advanced manufacturing technologies. The company’s extended partnership with Lectra entails focusing on operational excellence initiatives across its automotive seating division.

  • Lectra contributes to Faurecia Seating Business Group Industry 4.0 readiness and “digital enterprise” transformation initiative

Paris, September 26, 2017 – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the renewal of its partnership with Faurecia through the signing of a global agreement for its Seating Business Group.

The cutting process for the production of seat covers, headrests and interiors is an increasingly strategic part of Faurecia’s Seating activity. Faurecia Seating supplies vehicle complete seats, frames, mechanisms and trim covers to major carmakers worldwide, whose manufacturing processes are gradually evolving toward Industry 4.0.

Faurecia Seating aims to double the production of its existing manufacturing facilities by reinforcing operations with advanced manufacturing technologies. The company’s extended partnership with Lectra entails focusing on operational excellence initiatives across its automotive seating division.

Standardization of the Vector® fabric-cutting solution—endowed with preventive and predictive maintenance capabilities and the highest-performance cutting system available on the market to date—will be instrumental to the implementation of these initiatives throughout the division’s fabric cutting facilities. Faurecia currently has more than 60 Vector fabric cutting solutions in production worldwide.

“More than ever, we face major challenges in terms of flexibility, agility and productivity—producing more while reducing costs,” observes Hagen Wiesner, Executive Vice President, Faurecia Seating. “Our cutting processes have become strategic in reaching these goals. Faurecia’s ‘digital enterprise’ project aims to achieve operational excellence in virtually every aspect of our organization. Together with Lectra, we will make this a reality in the cutting room, with smart automation and predictive maintenance”.

“Given the profound transformations gripping manufacturing, helping our customers ready their operations for the Fourth Industrial Revolution has become without question our core mission,” remarks Daniel Harari, Lectra Chairman and CEO. “Faurecia is among the automotive suppliers at the forefront of this movement. Digital technologies and industry expertise are the business enablers that will allow manufacturers to connect inside and outside the value chain in the near future.”

More information:
Lectra Technical Textiles Leather Automotive Cadillac Faurecia
Source:

Lectra Headquarters / Press Department
 

print close
more
Carboncast Carboncast
Carboncast
20.06.2017

CHOMARAT AND ALTUS GROUP PRESENT CARBONCAST

At the “Future of Composites in Construction” trade show, CHOMARAT and ALTUS GROUP are presenting CarbonCast®, their flagship line of reinforced-concrete prefabricated wall panels, reinforced with CHOMARAT’s C-GRID® carbon-fiber grids. A recent army-hospital project in Greenville, South Carolina is another success story of this innovative product: 18,600 m² (200,000 sq.ft) of precast insulated panels were installed in record time. Come and learn more about it at the McCormick Place Lakeside Center, Chicago, Stand C 10, on 20-22 June 2017.
“Reducing installation time, improving the fire and safety performance, increasing the service life of structures, and cutting energy consumption are crucial criteria in the choice of a CarbonCast solution,” explains ALTUS GROUP Executive Director John CARSON. CarbonCast® panels are classified ASHRAE 90.1. Thanks to the low thermal conductivity of carbon fiber, C-GRID® reinforced panels offer excellent thermal performance, providing uniform insulation and, therefore, a comfortable, energy-efficient building.

At the “Future of Composites in Construction” trade show, CHOMARAT and ALTUS GROUP are presenting CarbonCast®, their flagship line of reinforced-concrete prefabricated wall panels, reinforced with CHOMARAT’s C-GRID® carbon-fiber grids. A recent army-hospital project in Greenville, South Carolina is another success story of this innovative product: 18,600 m² (200,000 sq.ft) of precast insulated panels were installed in record time. Come and learn more about it at the McCormick Place Lakeside Center, Chicago, Stand C 10, on 20-22 June 2017.
“Reducing installation time, improving the fire and safety performance, increasing the service life of structures, and cutting energy consumption are crucial criteria in the choice of a CarbonCast solution,” explains ALTUS GROUP Executive Director John CARSON. CarbonCast® panels are classified ASHRAE 90.1. Thanks to the low thermal conductivity of carbon fiber, C-GRID® reinforced panels offer excellent thermal performance, providing uniform insulation and, therefore, a comfortable, energy-efficient building.

More information:
Chomarat, Altus Group, Carboncast
Source:

AGENCE APOCOPE

print close
more