From the Sector

Reset
808 results
15.11.2023

ECHA: Research needs for regulating hazardous chemicals

The European Chemicals Agency (ECHA) has published a new report on ‘Key areas of regulatory challenge 2023’ that identifies areas where research is needed to protect people and the environment from hazardous chemicals. It also highlights where new methods, that support the shift away from animal testing, are needed.

To further improve chemical safety in the EU, scientific research needs to deliver data that is relevant to regulating chemicals. In order to enhance the regulatory relevance of scientific data, ECHA has identified the following areas as priorities for research:

The European Chemicals Agency (ECHA) has published a new report on ‘Key areas of regulatory challenge 2023’ that identifies areas where research is needed to protect people and the environment from hazardous chemicals. It also highlights where new methods, that support the shift away from animal testing, are needed.

To further improve chemical safety in the EU, scientific research needs to deliver data that is relevant to regulating chemicals. In order to enhance the regulatory relevance of scientific data, ECHA has identified the following areas as priorities for research:

  • Hazard identification for critical biological effects that currently lack specific and sensitive test methods: i.e. developmental and adult neurotoxicity, immunotoxicity and endocrine disruption
  • Chemical pollution in the natural environment (bioaccumulation, impact on biodiversity, exposure assessment)
  • Shift away from animal testing (read across under REACH, move away from fish testing, mechanistic support to toxicology studies e.g. carcinogenicity)
  • New information on chemicals (polymers, nanomaterials, analytical methods in support of enforcement)

Background
The European Partnership for the Assessment of Risks from Chemicals (PARC), is a seven-year EU-wide research and innovation programme under Horizon Europe which aims to advance research, share knowledge and improve skills in chemical risk assessment.

ECHA’s role in PARC is to make sure that the funded scientific research addresses current challenges related to chemical risk assessment and adds value to the EU’s regulatory processes.

The key areas of regulatory challenge report can be seen as an evolving research and development agenda aiming to support and inspire the Partnership for the Assessment of Risks from Chemicals (PARC) and the wider research community. The list of research needs is not exhaustive. The next update to the report is expected in spring 2024.

More information:
ECHA chemicals polymers
Source:

The European Chemicals Agency (ECHA)

14.11.2023

Italian Textile Machinery at ITME Africa 2023

A delegation of 12 Italian textile machinery manufacturers will be on hand at the ITME Africa trade show, to be held in Nairobi (Kenya) from November 30th to December 2nd 2023. These Italian companies will be exhibiting at the Italian Pavilion, organized by ACIMIT, the Association of Italian Textile Machinery Manufacturers, and by the Italian Trade Agency.

Kenya’s economy is among the most dynamic in sub-Saharan Africa, with annual GDP growth rates of around 6%. Its textile and garments industry ranks among the Country’s leading economic revenue sources, and is supported by government programs aimed at sustaining growth, as well as international agreements, such as the Economic Partnership Agreement (EPA) between the European Union and Kenya, currently in the process of ratification.

A delegation of 12 Italian textile machinery manufacturers will be on hand at the ITME Africa trade show, to be held in Nairobi (Kenya) from November 30th to December 2nd 2023. These Italian companies will be exhibiting at the Italian Pavilion, organized by ACIMIT, the Association of Italian Textile Machinery Manufacturers, and by the Italian Trade Agency.

Kenya’s economy is among the most dynamic in sub-Saharan Africa, with annual GDP growth rates of around 6%. Its textile and garments industry ranks among the Country’s leading economic revenue sources, and is supported by government programs aimed at sustaining growth, as well as international agreements, such as the Economic Partnership Agreement (EPA) between the European Union and Kenya, currently in the process of ratification.

The total value of Kenya’s imports of textile machinery reached Euros 24 million in 2022. In the future, demand from local companies will mainly focus on high-end and medium to high-end technology, thus allowing Italian manufacturers to strengthen their market share in Kenya. Currently, Italian imports amount to approximately 4% of total imported machinery technology, for a value of roughly Euros 900 thousands in 2022.

Among the 12 Italian exhibitors the following ones are ACIMIT associated members: Biancalani, Bianco; Danitech, Ferraro, Lgl, Mei, Monti Antonio, Reggiani Macchine, Savio, Stalam and Tomsic.

More information:
ACIMIT ITME Africa
Source:

ACIMIT

(c) AVK - Industrievereinigung Verstärkte Kunststoffe e. V.
14.11.2023

Successful SMCCreate 2023 Design Conference in Prague

Successful SMCCreate 2023 Design Conference in Prague

With over 60 participants from Europe and the USA the second edition of the SMCCreate Design Conference took place from November 7th to 8th in Prague. The conference was jointly organized by the AVK – Federation of Reinforced Plastics and the European Alliance for SMC BMC, promoting the use of SMC and providing design tools to designers for applying these versatile materials.

During the SMCCreate 2023 conference topics covered the wide spectrum of the design with fiber composite/composite components in SMC and BMC technology, from conceptual design, development, and scale-up, with a special emphasis on recycling and sustainability solutions. 18 speakers from various European countries showed how they address important market trends and changing customer needs, and which solutions their companies offered in terms of materials, performance and much more.

Successful SMCCreate 2023 Design Conference in Prague

With over 60 participants from Europe and the USA the second edition of the SMCCreate Design Conference took place from November 7th to 8th in Prague. The conference was jointly organized by the AVK – Federation of Reinforced Plastics and the European Alliance for SMC BMC, promoting the use of SMC and providing design tools to designers for applying these versatile materials.

During the SMCCreate 2023 conference topics covered the wide spectrum of the design with fiber composite/composite components in SMC and BMC technology, from conceptual design, development, and scale-up, with a special emphasis on recycling and sustainability solutions. 18 speakers from various European countries showed how they address important market trends and changing customer needs, and which solutions their companies offered in terms of materials, performance and much more.

As an introduction, speakers - including CTC/Airbus and Teijin - presented different possible applications for SMC and BMC components, including aircraft interiors, bicycle boxes, and applications in e-mobility. The topic of sustainability was broadly covered, highlighting recycling solutions and experiences (Siemens, IDI, OC, AOC), the use of renewable raw materials, as well new LCA models developed by the SMC BMC Alliance (LCS),

Specifically for designers, the use of the SMC flow and curing modelling was presented (ESI, OC), SMC positioning vs. aluminium (Spartners). The second day concluded with contributions on process optimization options for component production, including speeches by Dieffenbacher, Netzsch and EBG.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

08.11.2023

ECHA: Toxic chemicals in childcare products

The European Chemicals Agency (ECHA) has found that substances causing cancer, genetic mutations or harming reproduction are present in childcare products, such as car seats, bibs and baby changing mats. Its investigation will help the European Commission to prepare an EU-wide restriction to limit these chemicals, with the aim of safeguarding children.

ECHA’s investigation, drawing on information from 48 different sources, shows that substances which are carcinogenic, mutagenic or toxic for reproduction (CMR) may be present in childcare products (articles). Metals like cobalt and lead, along with phthalates like DEHP, are the most common CMR substances found in childcare products.

CMRs were most often found in items like car seats, bibs, products related to toiletries, and bedding and mattresses. Children may be exposed to these hazardous substances during use, for example through skin or oral contact, and are particularly vulnerable to the harm caused by chemical substances because of their small size, developing physiology and behaviour.

The European Chemicals Agency (ECHA) has found that substances causing cancer, genetic mutations or harming reproduction are present in childcare products, such as car seats, bibs and baby changing mats. Its investigation will help the European Commission to prepare an EU-wide restriction to limit these chemicals, with the aim of safeguarding children.

ECHA’s investigation, drawing on information from 48 different sources, shows that substances which are carcinogenic, mutagenic or toxic for reproduction (CMR) may be present in childcare products (articles). Metals like cobalt and lead, along with phthalates like DEHP, are the most common CMR substances found in childcare products.

CMRs were most often found in items like car seats, bibs, products related to toiletries, and bedding and mattresses. Children may be exposed to these hazardous substances during use, for example through skin or oral contact, and are particularly vulnerable to the harm caused by chemical substances because of their small size, developing physiology and behaviour.

ECHA’s report provides elements to support the European Commission in the preparation of a potential future restriction. These include information on how childcare articles are defined, what the restriction could cover, potential derogations, recommended concentration limits and timeframes for implementation. The report also includes views from ECHA’s Enforcement Forum on how feasible it would be to enforce such a restriction.

The report will now be sent to the European Commission, who will use it to prepare a draft restriction proposal under REACH Article 68(2). This procedure allows the Commission to prepare a restriction proposal without involvement of ECHA’s scientific committees.

Background
The purpose of ECHA’s investigation is to support the European Commission in preparing a restriction under the REACH Regulation to protect children from exposure to CMR substances in childcare articles. It focused on substances that have a harmonised classification under the Classification, Labelling and Packaging (CLP) Regulation as a CMR in category 1A (known human carcinogen, mutagen or reproductive toxicant) or 1B (presumed human carcinogen, mutagen or reproductive toxicant).

During the investigation, ECHA organised two public calls for evidence and a consultation on the draft report. The Agency contacted 233 different stakeholders to inform about the work and considered their feedback.

Source:

European Chemicals Agency

08.11.2023

adidas: Revenue increase in third quarter

Developments:

Developments:

  • Currency-neutral revenues up 1% driven by growth in all regions except North America
  • Top-line development reflects focus on conservative sell-in and full-price business
  • Gross margin up 0.2pp to 49.3% driven by reduced freight costs, a more favorable business mix, and lower inventory allowances; discounting levels continue to improve  
  • Operating profit of € 409 million includes extraordinary expenses of around € 110 million
  • Conservative sell-in strategy paying off as inventory position improves substantially versus Q2 level to € 4.8 billion; now down 23% year-over-year

Outlook
adidas expects revenues to decline at a low-single-digit rate
On October 17, adidas had adjusted its full year financial guidance to reflect both the positive impact of the second drop of some of its Yeezy inventory and the better-than-expected development of the underlying business. At the same time, macroeconomic challenges and geopolitical tensions persist. Elevated recession risks in North America and Europe as well as uncertainty around the recovery in Greater China continue to exist. In addition, the company’s revenue development will continue to be impacted by the initiatives to significantly reduce high inventory levels in North America and the company’s focus on full-price sales across its own channels. As a result, adidas now expects currency-neutral revenues to decline at a low-single-digit rate in 2023 (previously: decline at a mid-single-digit rate).

Underlying operating profit anticipated to reach a level of around € 100 million
The company’s underlying operating profit – excluding any one-offs related to Yeezy and the ongoing strategic review – is now anticipated to reach a level of around € 100 million in 2023 (previously: around break-even level). Including the positive impact from the two Yeezy drops in Q2 and Q3 of around € 300 million (previously: € 150 million), the potential write-off of the remaining Yeezy inventory of now around € 300 million (previously: € 400 million) and one-off costs related to the strategic review of up to € 200 million (unchanged), adidas now expects a reported operating loss of around € 100 million in 2023 (previously: loss of € 450 million).

Source:

adidas AG

Lenzing and Södra win ITMF Award for cooperation in textile recycling (c) Lenzing AG/Leopold
Lenzing x Södra Project team
06.11.2023

Lenzing and Södra: ITMF Award for cooperation in textile recycling

  • Lenzing and Södra – a long-standing partnership for systemic change
  • International Textile Manufacturers Federation (ITMF) honored the two companies in the "International Cooperation" category
  • EU co-funded recycling project for textiles on an industrial scale

The Lenzing Group, the world’s leading supplier of specialty fibers for the textile and nonwovens industries, and the Swedish pulp producer Södra have received the ITMF Award 2023 in the category “International Cooperation” for their joint achievements in textile recycling and circular economy. The award was presented at the ITMF Annual Conference in Keqiao, China, on November 06, 2023.

  • Lenzing and Södra – a long-standing partnership for systemic change
  • International Textile Manufacturers Federation (ITMF) honored the two companies in the "International Cooperation" category
  • EU co-funded recycling project for textiles on an industrial scale

The Lenzing Group, the world’s leading supplier of specialty fibers for the textile and nonwovens industries, and the Swedish pulp producer Södra have received the ITMF Award 2023 in the category “International Cooperation” for their joint achievements in textile recycling and circular economy. The award was presented at the ITMF Annual Conference in Keqiao, China, on November 06, 2023.

The ITMF Award 2023 is given by the International Textile Manufacturers Federation (ITMF) to recognize outstanding achievements and merits in the textile sector in two categories: ”Sustainability & Innovation“ and ”International Cooperation“. Since 2021, the two pioneers have been joining forces in textile recycling, making a decisive contribution to promoting the circular economy in the fashion industry. As part of the cooperation, the companies intend to share their knowledge with each other and jointly develop processes to enable the wider use of cellulose-based used textiles on a commercial scale.

The OnceMore® pulp from Södra, which was jointly developed further by Södra and Lenzing, is subsequently used, among other things, as a raw material for the production of Lenzing fibers with REFIBRA™ technology. The OnceMore® process makes it possible to process and recycle a blend of cotton and polyester.

ITMF paid particular tribute to the joint LIFE TREATS project (Textile Recycling in Europe AT Scale)1,which was supported by an EU grant of EUR 10m under the LIFE 20222 program and aims to build a large-scale plant at Södra's Mörrum site in Sweden.

For more information on the ITMF Awards 2023, visit the ITMF website.

1 Project 101113614 — LIFE22-ENV-SE-TREATS
2 https://cinea.ec.europa.eu/programmes/life_en

Source:

Lenzing AG

CHT USA celebrates expansion of its headquarters in Michigan (c) CHT Group
03.11.2023

CHT USA celebrates expansion of its headquarters in Michigan

With a ribbon cutting ceremony on October 24, 2023 CHT USA celebrated the $ 25 million expansion at its US headquarters in Cassopolis, Michigan. More than 100 attendees came to the celebrations, among others officials from local, county and state governments, neighbors, and area business leaders, CHT employees, CTO Dr. Bernhard Hettich as representative of CHT’s Global management team, and members of the press.

In his speech, Dr. Bernhard Hettich, CTO of CHT Group, thanked the local authorities for their business-friendly policies and stated that a development towards sustainability in many areas would not be possible without CHT's silicone products: "With CHT's largest single investment outside Europe, CHT is taking a big step and doubling its silicone production capacity. We intend to use this expansion not only to support our customers in the Americas, but also to leverage the capacity for our global growth. In line with the motto "CHT first", further steps in this direction will follow."

With a ribbon cutting ceremony on October 24, 2023 CHT USA celebrated the $ 25 million expansion at its US headquarters in Cassopolis, Michigan. More than 100 attendees came to the celebrations, among others officials from local, county and state governments, neighbors, and area business leaders, CHT employees, CTO Dr. Bernhard Hettich as representative of CHT’s Global management team, and members of the press.

In his speech, Dr. Bernhard Hettich, CTO of CHT Group, thanked the local authorities for their business-friendly policies and stated that a development towards sustainability in many areas would not be possible without CHT's silicone products: "With CHT's largest single investment outside Europe, CHT is taking a big step and doubling its silicone production capacity. We intend to use this expansion not only to support our customers in the Americas, but also to leverage the capacity for our global growth. In line with the motto "CHT first", further steps in this direction will follow."

For the Cass County site, the approximately 45,000 square feet new facility with 5 reactors and distillation units resulted in an increase in the total area of the company's site to 120,000 square feet. This will then allow sufficient space for additional reactors and downstream processes. The CHT USA site expansion has created approximately 30 highly skilled jobs in the community.

CHT USA’s Regional Sales and Marketing Director NORAM, Matthew Loman hosted the Ribbon Cutting ceremony.

More information:
CHT Group USA silicone
Source:

CHT Group

03.11.2023

Solvay announces Board of Directors for standalone SYENSQO

Solvay announced the future Board of Directors of SYENSQO, effective upon completion of the planned separation of Solvay into two companies – SOLVAY and SYENSQO – which is on track to be completed in December 2023.

SYENSQO’s Board will be composed of 10 members, including 6 independent members, 3 members representing the reference shareholder, Solvac, and the company CEO. They have deep expertise in specialty industries, international business operations, risk management, corporate governance, finance and clean technology.

Solvay announced the future Board of Directors of SYENSQO, effective upon completion of the planned separation of Solvay into two companies – SOLVAY and SYENSQO – which is on track to be completed in December 2023.

SYENSQO’s Board will be composed of 10 members, including 6 independent members, 3 members representing the reference shareholder, Solvac, and the company CEO. They have deep expertise in specialty industries, international business operations, risk management, corporate governance, finance and clean technology.

The following individuals will serve on the SYENSQO Board of Directors:
Rosemary Thorne will serve as independent Director and Chair of the SYENSQO Board, as well as Chair of the Board’s Finance Committee. She is currently an Independent Director on the Solvay Board of Directors, appointed in 2014, and Chair of the Board’s Audit Committee. She is also an Independent Director on the Board of Merrill Lynch International (UK), a wholly-owned subsidiary of Bank of America, serving as Chair of the Audit Committee. Ms. Thorne has decades of financial leadership experience across a wide range of industries. She previously served as Chief Financial Officer at J. Sainsbury, the UK’s largest supermarket chain at the time; Bradford & Bingley; and Ladbrokes. Ms. Thorne previously sat as an Independent Director on the Boards of Royal Mail Group, Cadbury Schweppes, Santander UK, First Global Trust Bank and Smurfit Kappa Group.

Dr. Ilham Kadri will serve as Chief Executive Officer and member of the Board of Directors of SYENSQO. She is currently CEO and President of the Executive Committee at Solvay. Ms. Kadri has successfully led the turnaround of Solvay, delivering double-digit EBITDA growth and 18 consecutive quarters of positive free cash flow, deleveraging the balance sheet and promoting superior people engagement. She is an independent Board member at A.O. Smith and L’Oréal. She is active in non-profit organizations, as Chair of the World Business Council for Sustainable Development (WBCSD), member of the steering committee of the European Round Table of Industrialists (ERT) as well as a permanent member of the World Economic Forum’s International Business Council (WEF). Ms. Kadri has extensive leadership experience across a variety of industries in four continents and with leading industrial multinationals, including Shell, UCB, Huntsman, Dow, Sealed Air. Prior to Solvay, she was CEO and President of Diversey in the USA, led the company’s return to profitability and resulting spin off and divestiture to Bain Capital. She founded two non-Profit foundations: the Solvay Solidarity Fund in Belgium in 2020 which supported more than 7000 families affected by Covid-19 and natural disasters; and founded the ISSA Hygieia Network in 2015 in the USA, to help women in the cleaning industry. She received two Doctor Honoris Clausa from EWHA University in Korea and Université de Namur in Belgium.

Julian Waldron will serve as independent Director and Chair of the Audit Committee. He currently serves as Deputy Executive Chairman of privately-held Albea Group, a global beauty and personal care packaging company which operates 35 facilities in Europe, Asia and the Americas. Mr. Waldron has held senior leadership roles at several leading listed companies in the industrial, technology and services sectors and brings a wealth of expertise in finance and business operations. Prior to joining Albea in 2022, he was Chief Financial Officer of Suez for three years after serving as Chief Financial Officer and subsequently Chief Operating Officer of Technip. He started his career at UBS Warburg where he spent 14 years. Mr. Waldron also served as an independent Board member and Chairman of finance, risk and investments at Carbon Clean, a privately-owned carbon capture company dedicated to achieving net zero.

Heike Van de Kerkhof will serve as independent Director and Chair of the Nomination Committee. She currently sits on the Board of OCI N.V.. Ms. Van de Kerkhof brings more than 30 years of experience in the chemicals, oil & gas and materials industries, having served in numerous leadership roles around the globe. From 2020 to 2023, she was Chief Executive Officer of Archroma Management, a global specialty chemicals company. During her tenure, she successfully completed the transformational acquisition of Huntsman’s Textile Effects business. Prior to her role at Archroma, Ms. Van de Kerkhof served as Vice President of Lubricants, Western Hemisphere at BP, and held positions at Castrol, The Chemours Company, and Neste Corporation. She also held many leading roles within DuPont over 18 years.

Matti Lievonen will serve as independent Director and Chair of the Compensation Committee. He is currently an independent director on the Solvay Board, appointed in 2017. Mr. Lievonen is a proven executive in the energy, forestry, power and automation industries with an extensive track record of leading businesses through climate transition. For over ten years until 2018, he served as Chairman and Chief Executive Officer of Neste Corporation, a global leader in next-generation renewable fuels and chemicals. During his time at Neste, Mr. Lievonen successfully promoted the development of clean fuels as well as Finland’s bioeconomy strategy in advancing renewable transportation fuels. He has also been involved with organizations such as Fortum Board, SSAB, Nynäs AB, Ilmarinen, and the HE Finnish Fair Foundation. Until 2021, Mr. Lievonen was also Chairman of the Board of Directors at Fortum. He has been recognized for his admirable leadership and expertise, and in 2016 was awarded an Honorary Doctorate of Technology by the Aalto University Schools of Technology.

Dr. Françoise de Viron will serve as non-independent Director, Chair of the ESG Committee and Vice-Chair of the Board. She is currently a director of the Solvay Board, appointed in 2013. Ms. de Viron is a regarded academic leader and has extensive experience in innovation, R&D and qualitative research. She is a Professor Emeritus at the Faculty of Psychology and Education Sciences and Louvain School of Management at UCLouvain in Belgium where she has been an Academic Member of various groups at UCLouvain. Ms. de Viron previously served as the president of AISBL EUCEN – the European Universities Continuing Education Network. Prior to her university position, from 1985 to 2000, she was in charge of developing Artificial Intelligence applications at Tractebel S.A. (now Tractebel-Engie).

Roeland Baan will serve as independent Director. He currently serves as President and Chief Executive Officer of Topsoe, a privately-held leading provider of clean energy and petrochemical technologies. He is also Chairman of the Supervisory Board of SBM Offshore NV. Roeland Baan has extensive experience in supply chain management, M&A, business development and operations management. Prior to joining Topsoe in 2020, he was President and CEO of Outokumpu and has held several executive roles at global organizations such as Aleris International, ArcelorMittal and SHV NV. He spent over 16 years in various roles across the globe at Shell, living in South America, in Africa and in the United Kingdom.

Edouard Janssen will serve as non-independent Director. He is currently a Director on the Solvay Board, appointed in 2021. Earlier this year, he was appointed Chief Financial Officer of D’Ieteren Group, a European leader in automotive distribution services. Mr. Janssen is also a Board member of privately-held Financière de Tubize and Union Financière Boël, as well as Co-Founder and Chair of Trusted Family. Mr. Janssen is active in academics, as Vice-Chair of the International Advisory Board of the Solvay Brussels School of Economics and Management and on the advisory board of the INSEAD HGIBS. He brings expertise in finance, strategy, entrepreneurship, business management, planning and marketing. He has served as Solvay’s Vice President in strategy and M&A between 2019 and 2021, and prior to that, he was the US-based General Manager for North- and Latin America at Solvay’s Aroma Performance Global Business Unit.
 
Dr. Mary Meaney will serve as non-independent Director. She is currently a member of the Board of Directors and of the Audit Committee of Groupe Bruxelles Lambert SA. She also sits on the Board of Directors and the Remuneration Committee of Beamery, the privately-held talent management company. She is a member of the Board of Directors and of the Finance Committee of Imperial College, London.Dr. Meaney will bring expertise in Strategy, M&A, and change management, which she acquired over a 24-year career at McKinsey. She was a Senior Partner, served on the McKinsey Shareholders Council and led McKinsey’s global Organization practice.

Nadine Leslie will serve as independent Director and is based in the United States of America. She is currently a member of the Board of Directors of Provident Financial Services , as well as a Non-Executive Director of Seven Seas Water Corporation, a water and wastewater treatment multinational company. She also sits on the Board of Trustees of Hackensack Meridian Health Network and is active as strategic consultant for civil engineering firm T&M Associates. Over a 22-year career at Suez, Ms. Leslie held several leadership positions, the last one being Chief Executive Officer of Suez North America, until 2022. Previously she served as Executive Vice President Health & Safety.

More information:
Solvay Board of Directors
Source:

Solvay

26.10.2023

Source Fashion doubles again for February 2024

The appetite for responsible sourcing shows no sign of slowing with Europe's fastest-growing platform, Source Fashion expanding again for its next edition with a 50% increase in exhibitors to over 320 from around the world.

The gateway to the UK fashion industry, Source Fashion takes place on 18th - 20th February at Kensington Olympia London putting international manufacturers and suppliers at the fingertips of UK brands.

Source Fashion offers a unique experience for decision-makers in buying, sourcing and procurement, with the reassurance of knowing that every exhibitor has been audited to ensure sustainability and transparency remains at the heart of their business model. The next show unites manufacturers from the UK, India, Portugal, Turkey Madagascar, China, Sri Lanka, Nepal, Peru, Philippines, Ethiopia and many more. The show will also see the debut of manufacturers from Mongolia, Lithuania, and Tunisia.

The appetite for responsible sourcing shows no sign of slowing with Europe's fastest-growing platform, Source Fashion expanding again for its next edition with a 50% increase in exhibitors to over 320 from around the world.

The gateway to the UK fashion industry, Source Fashion takes place on 18th - 20th February at Kensington Olympia London putting international manufacturers and suppliers at the fingertips of UK brands.

Source Fashion offers a unique experience for decision-makers in buying, sourcing and procurement, with the reassurance of knowing that every exhibitor has been audited to ensure sustainability and transparency remains at the heart of their business model. The next show unites manufacturers from the UK, India, Portugal, Turkey Madagascar, China, Sri Lanka, Nepal, Peru, Philippines, Ethiopia and many more. The show will also see the debut of manufacturers from Mongolia, Lithuania, and Tunisia.

Suzanne Ellingham, Director of Sourcing of Source Fashion says; "Visitors will love the quality, diversity and variety of producers, makers and manufacturers from around the world with the best of the best in terms of high-quality knitted apparel, luxury wool knits, leather, denim, and more across our sectors including Fabrics, Accessories, Sportswear, Garment Manufacturers, Packaging, Yarns, Trims and Fixtures, plus Design & Technology."

Connecting global manufacturers and suppliers to buyers who want the security in knowing every conversation is one that could lead to a new range creation, Source Fashion is the gateway to retail for manufacturers and suppliers from across the world. From raw materials, fabrics, trims, and packaging, all the way through to contract manufacturers offering in house design services, the show brings the inspiration and tools together in one exciting destination to bring new ranges to life.

The July 2023 show welcomed some of retail's biggest names. Buyers, sourcing managers, product developers, technologists, and designers from brands and retailers including John Lewis, Mountain Warehouse, Fila, Selfridges, H&M, Lipsy, Lyle & Scott, Joules, FILA, Perry Ellis, JoJo Mamman Bebe, Monsoon, Fatface, Lulu Guinness, Next, Sainsburys, Vivienne Westwood, Stitch Fix, ASOS, Bella Freud, Burberry, Fat Face, Hackett, Harrods, NBrown, Monsoon and many more came to explore and source from Source Fashion's diverse mix of audited exhibitors.

With a content stage dedicated to presenting and discussing the latest trends, innovations, and topics in responsible and sustainable manufacturing from internationally renowned industry professionals, as well the inspirational Source Catwalk shows, Source Fashion is the must-attend event for the fashion community.

More information:
Source Fashion
Source:

Good Results PR

11.10.2023

Toray expands French Carbon Fiber Production Facilities

Toray Industries, Inc. will expand the French subsidiary Toray Carbon Fibers Europe S.A.’s production facilities for regular tow medium- and high-modulus carbon fibers (up to 24,000 filaments). This move will increase annual capacity at the Abidos plant (South-West France) from 5,000 metric tons annually, to 6,000 metric tons. Production is expected to start in 2025.

Demand for medium- and high-modulus carbon fibers is rising in Europe, driven by a push to move towards a net-zero society. This growth is mainly due to higher build rates for commercial aircrafts (secondary structures and engines), as well as centrifuge for energy production, satellites, and high-end automobiles. By boosting carbon fiber production capacity in Europe, Toray is responding to its customers’ demand for medium and high-modulus carbon fibers, as befits the market leader.

Toray Industries, Inc. will expand the French subsidiary Toray Carbon Fibers Europe S.A.’s production facilities for regular tow medium- and high-modulus carbon fibers (up to 24,000 filaments). This move will increase annual capacity at the Abidos plant (South-West France) from 5,000 metric tons annually, to 6,000 metric tons. Production is expected to start in 2025.

Demand for medium- and high-modulus carbon fibers is rising in Europe, driven by a push to move towards a net-zero society. This growth is mainly due to higher build rates for commercial aircrafts (secondary structures and engines), as well as centrifuge for energy production, satellites, and high-end automobiles. By boosting carbon fiber production capacity in Europe, Toray is responding to its customers’ demand for medium and high-modulus carbon fibers, as befits the market leader.

Source:

Toray Industries

10.10.2023

Textile & Fashion Forum Helsinki 2023

The Textile & Fashion Forum Helsinki 2023, organized by Finnish Textile & Fashion and EURATEX, highlights the discourse on sustainable practices within the textile and fashion industry. This two-day event, scheduled for 26-27 October at the Little Finlandia event center in Helsinki, will include a day of curated company visits.

Finland’s leading textile and fashion forum will showcase the industry's pioneering companies and their pursuit of a sustainable and resilient future. With insightful discussions, inspiring speakers, and thrilling business cases, the event drives transformation and sets new benchmarks for the textile and fashion sector.

The Textile & Fashion Forum Helsinki 2023, organized by Finnish Textile & Fashion and EURATEX, highlights the discourse on sustainable practices within the textile and fashion industry. This two-day event, scheduled for 26-27 October at the Little Finlandia event center in Helsinki, will include a day of curated company visits.

Finland’s leading textile and fashion forum will showcase the industry's pioneering companies and their pursuit of a sustainable and resilient future. With insightful discussions, inspiring speakers, and thrilling business cases, the event drives transformation and sets new benchmarks for the textile and fashion sector.

The Textile & Fashion Forum Helsinki 2023 will focus on critical industry themes. The transformation of the textile and fashion industry relies on three key pillars: the creation of different circular business models matching growth with sustainability, a green and digital transition where information technology is necessary to deliver sustainability, and scaling the business, as how start-ups can make a leap and big companies can evolve their growth strategies. These three themes will be discussed in depth during the event.

The speaker lineup, drawn from Finland, Europe and beyond, demonstrates the expertise connecting on this platform. Noteworthy figures include Tiina Alahuhta-Kasko, President & CEO of Marimekko; Kai Mykkänen, Minister of Climate and the Environment of Finland; Marcus Hartmann, Head of Public Affairs & Sustainability at H&M; Liljana K. Forssten, Range Strategist at IKEA; and Virginijus Sinkevičius, European Commissioner (on video).

Source:

Euratex & Finnish Textile & Fashion

TEXAID x Triumph: Expansion of international in-store collection program (c) TEXAID Textilverwertungs-AG
06.10.2023

TEXAID x Triumph: Expansion of international in-store collection program

As a leading company in the collecting, sorting, reselling and recycling of post-consumer textile waste, TEXAID has enabled the recycling of post-consumer textile waste into new textiles and clothing. Working together with brands and retailers, TEXAID and our partners are continuing to take action to shift from a linear to a circular system.

Since 2022, TEXAID has partnered with Triumph International, operating their in-store collection program, “Together We Grow”, for 160 stores across Austria, Denmark, France, Germany, the Netherlands and Switzerland. Given the success of the program, starting April 2023, in-store take back has been expanded to an additional 108 stores across Belgium, Czech Republic, Hungary, Luxembourg, Poland, Portugal, Sweden and Spain. Customers bring in their worn garments and TEXAID manages the collected clothing in alignment with the EU waste hierarchy, sending each item to its next most sustainable lifecycle. TEXAID is pleased to be partnering with Triumph International to offer in-store take back, at scale, across Europe. For every 5 kg collected, Triumph plants a tree in partnership with Treedom.

As a leading company in the collecting, sorting, reselling and recycling of post-consumer textile waste, TEXAID has enabled the recycling of post-consumer textile waste into new textiles and clothing. Working together with brands and retailers, TEXAID and our partners are continuing to take action to shift from a linear to a circular system.

Since 2022, TEXAID has partnered with Triumph International, operating their in-store collection program, “Together We Grow”, for 160 stores across Austria, Denmark, France, Germany, the Netherlands and Switzerland. Given the success of the program, starting April 2023, in-store take back has been expanded to an additional 108 stores across Belgium, Czech Republic, Hungary, Luxembourg, Poland, Portugal, Sweden and Spain. Customers bring in their worn garments and TEXAID manages the collected clothing in alignment with the EU waste hierarchy, sending each item to its next most sustainable lifecycle. TEXAID is pleased to be partnering with Triumph International to offer in-store take back, at scale, across Europe. For every 5 kg collected, Triumph plants a tree in partnership with Treedom.

To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID continues to expand its offering for in-store collection programs throughout Europe and the USA.

Source:

TEXAID Textilverwertungs-AG

05.10.2023

EURATEX and CIE warn EU Presidency about de-industrialised Europe

Ahead of the extra-ordinary Council on 6 October in Granada, EURATEX President, Alberto Paccanelli, and CIE President, Jose Vte Serna, call on the EU Presidency to develop a new competitiveness strategy, which can relaunch the European industry and ensure it will remain competitive in the decades to come. This means bringing together trade, energy, state aid and sustainability policies into a single, integrated, comprehensive approach, which can support a robust and modern European manufacturing industry.  
 
To consolidate a strong industrial structure in Europe, the Union should

Ahead of the extra-ordinary Council on 6 October in Granada, EURATEX President, Alberto Paccanelli, and CIE President, Jose Vte Serna, call on the EU Presidency to develop a new competitiveness strategy, which can relaunch the European industry and ensure it will remain competitive in the decades to come. This means bringing together trade, energy, state aid and sustainability policies into a single, integrated, comprehensive approach, which can support a robust and modern European manufacturing industry.  
 
To consolidate a strong industrial structure in Europe, the Union should

  1. secure the supply of clean energy at a competitive cost;
  2. support innovation and foster the necessary talent pool and
  3. be more assertive in achieving an international level-playing field on sustainability, based on the European model.  

During the past few years the implementation of incoherent and conflicting objectives under the trade, energy, industrial and sustainability policy has been observed. As a matter of fact, while the circular economy promised to be a recipe for a competitive industry of the future, the likelihood of pushing the EU industry out of the market and driving investment elsewhere than in Europe is very high. If this approach were to continue in the next years, it will result in a de-industrialised Europe, depending on imports from abroad. Such a Europe would be more exposed to geopolitical turmoil, with no agency to deliver its vision of peace, well-being and a healthy environment to its citizens.

It is fundamental for Europe to pursue a more coherent set of policies that put the competitiveness of its domestic industry at the core. In this context, all the industrial manufacturing sectors should be in the scope, including the textile industry, given its importance in providing essential products and applications to our society. A first impactful action that can be taken in this direction, would be to expand the scope of the Net-Zero Industry Act (NZIA) to include the textiles and clothing industry.
 
The history of European industry is fully woven in the birth and expansion of the European textiles industry since the XVIII century. Still today, the European textiles and clothing industry holds a pivotal position in the market, encompassing a diverse range of sectors and applications. In terms of employment, our industry creates 1,3 million direct jobs in Europe, encompassing a wide range of roles, from design and production to distribution and retail. European textiles have a wide range of applications, the most common one is of course clothing and fashion. The industry has a long history of producing high-quality apparel, with various regions specializing in specific niches.
 
Beyond clothing, there is a wide range of industrial sectors were textiles play an essential role, including  Automotive (used for upholstery, interior components, and even lightweight composite materials), Aircraft and Shipbuilding (where textiles are employed for their lightweight and high-strength properties, to enhance fuel efficiency, reduce emissions, and improve overall performance), Building and Construction (insulation, roofing, geotextiles, and architectural textiles), or Personal Protective Equipment, for medical personnel, firefighters, police and army officers. This includes masks, gowns, uniforms, helmets, and fire-resistant clothing, ensuring safety in hazardous environments.
 
Textiles are essential components of our society and our well-being. It is key for Europe to maintain its capacity to manufacture high-quality, sustainable and high-technology textiles.  With this in mind, the competitiveness policy of the future and the related funds to support it, should include the textile ecosystem in its scope.  

 

More information:
Euratex EU council Policy Hub
Source:

Euratex

Freudenberg´s Colback ECO-R and Lutradur ECO-R backings contain a recycled content of between 51 and 90 %. (c) Freudenberg
Freudenberg´s Colback ECO-R and Lutradur ECO-R backings contain a recycled content of between 51 and 90 %.
05.10.2023

Freudenberg extends ECO range for sustainable carpet backings

Freudenberg Performance Materials (Freudenberg) is extending its recently-introduced ECO range of sustainable nonwoven carpet backings: Lutradur ECO-R and Colback ECO-R backings contain high percentages of recycled raw materials. With its ECO portfolio Freudenberg supports carpet manufacturers in their transition towards an increasingly sustainable product offering.

The company launched its ECO range for sustainable primary backings earlier this year with the introduction of the ECO-RE resource-efficient backings that use less raw materials and support end product recyclability. To achieve this, Freudenberg R&D teams further developed the company’s proprietary yarn production technology allowing for extremely thin filaments.

Freudenberg Performance Materials (Freudenberg) is extending its recently-introduced ECO range of sustainable nonwoven carpet backings: Lutradur ECO-R and Colback ECO-R backings contain high percentages of recycled raw materials. With its ECO portfolio Freudenberg supports carpet manufacturers in their transition towards an increasingly sustainable product offering.

The company launched its ECO range for sustainable primary backings earlier this year with the introduction of the ECO-RE resource-efficient backings that use less raw materials and support end product recyclability. To achieve this, Freudenberg R&D teams further developed the company’s proprietary yarn production technology allowing for extremely thin filaments.

ECO-R products
Freudenberg’s spunbond nonwoven primary and secondary carpet backings contribute to manufacturers’ easy and efficient production processes as well as to high-performance end products. The company is now extending its ECO range in Europe with Colback ECO-R and Lutradur ECO-R backings that contain a recycled content of between 51 and 90%. Replacing virgin raw materials with recycled polyester saves on natural resources and improves the carbon footprint of end products. The ECO-R backings are specifically suitable for carpet tiles, broadloom, dust control mats and automotive option mats.

Source:

Freudenberg Performance Materials Holding GmbH

One-third increase in exhibitors at Cinte Techtextil China 2023 (c) Messe Frankfurt (HK) Ltd
04.10.2023

One-third increase in exhibitors at Cinte Techtextil China 2023

Since the rapid growth brought about by the pandemic, the technical textiles and nonwovens markets are stabilising towards a new normal – one in which technological innovation, sustainable development, and intelligent manufacturing are the most sought-after qualities. Held from 19 – 21 September 2023 at the Shanghai New International Expo Centre, the fair amplified this new industry direction, both through its fringe programme and across the booths of the 40,000 sqm show floor. With a nearly one-third increase from 2021, 467 exhibitors representing 13 countries and regions engaged a significantly international visitor flow, numbering 15,542 total visits from 52 countries and regions. Suppliers showcased up-to-date products for multiple application areas, with various equipment, technical textiles and nonwovens for agriculture, automotive, protective apparel, and medical and hygiene especially prevalent.

Since the rapid growth brought about by the pandemic, the technical textiles and nonwovens markets are stabilising towards a new normal – one in which technological innovation, sustainable development, and intelligent manufacturing are the most sought-after qualities. Held from 19 – 21 September 2023 at the Shanghai New International Expo Centre, the fair amplified this new industry direction, both through its fringe programme and across the booths of the 40,000 sqm show floor. With a nearly one-third increase from 2021, 467 exhibitors representing 13 countries and regions engaged a significantly international visitor flow, numbering 15,542 total visits from 52 countries and regions. Suppliers showcased up-to-date products for multiple application areas, with various equipment, technical textiles and nonwovens for agriculture, automotive, protective apparel, and medical and hygiene especially prevalent.

Speaking at the fair’s close, Ms Wilmet Shea, General Manager of Messe Frankfurt (HK) Ltd, had an optimistic outlook for the future of the sector: “Sustainability and innovation often go hand-in-hand, and walking through the various halls, zones, and pavilions these past few days the evidence for this was widespread. With environmental protection more important than ever, and buyers across application areas increasingly sourcing eco-friendly solutions, our exhibitors were well-placed to meet that demand. This fair is consistently at the leading edge of technological progress, and with the global and domestic markets showing signs of improving further, we are already looking forward to what we can offer at next year’s edition.”  

With many overseas exhibitors making a comeback, this year’s fair was marked by the return of the Taiwan Pavilion and the 40-exhibitor strong European Zone. Beyond the international areas, domestic pavilions were organised by Beijing Guanghua, China Hang Tang Group, Funing, Jiujing, Shenda, Tiantai, Xianto, and Xiqiao, showcasing nonwovens for various sub-sectors, including filtration and medical. Valuable insights were exchanged at multiple fringe events, including the 11th China International Nonwovens Conference, the Advanced Technical Textiles Industry Chain Synergistic Innovation Development Forum, various events covering marine textiles and rope netting, and the “Kingsafe Dangs” National University Students' Nonwovens Development and Applications Showcase. Visitors, meanwhile, were pleased with the innovation on show across the entire platform.

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

04.10.2023

Official launch of ReHubs Europe

At a kick off meeting hosted by Mango, EURATEX and 20 incoming members presented ReHubs Europe, a new international non-profit organisation poised to give a boost to the textile recycling. The launch follows three years of intense preparation, and the publication of a Techno-Economic Study, which analysed the business case, cost and environmental benefits for upscaling textile waste recycling in Europe.

ReHubs Europe will gather key players from the textile value chain - textile manufacturers, fashion brands, collectors and recyclers, chemical industry, technology providers - who welcome the ReHubs joint ambition to recycle 2.5 million tons of textile waste by 2030. This requires up to 250 industrial projects across Europe, covering different types of fibre-to-fibre recycling.

ReHubs Europe is the industry’s response to the upcoming EU legislation, which sets compulsory collection and sorting of textile waste, by 2025. To manage this, an upscale of recycling capacity is needed as well as a collaboration of different players from the value chain.

At a kick off meeting hosted by Mango, EURATEX and 20 incoming members presented ReHubs Europe, a new international non-profit organisation poised to give a boost to the textile recycling. The launch follows three years of intense preparation, and the publication of a Techno-Economic Study, which analysed the business case, cost and environmental benefits for upscaling textile waste recycling in Europe.

ReHubs Europe will gather key players from the textile value chain - textile manufacturers, fashion brands, collectors and recyclers, chemical industry, technology providers - who welcome the ReHubs joint ambition to recycle 2.5 million tons of textile waste by 2030. This requires up to 250 industrial projects across Europe, covering different types of fibre-to-fibre recycling.

ReHubs Europe is the industry’s response to the upcoming EU legislation, which sets compulsory collection and sorting of textile waste, by 2025. To manage this, an upscale of recycling capacity is needed as well as a collaboration of different players from the value chain.

Chris Deloof will lead ReHubs Europe as Executive Director. Chris has a long-standing experience in the textile sector and is a passionate advocate for cross-industry collaboration. Moreover, Chris is deeply committed to driving the transition towards a circular economy, which aligns seamlessly with ReHubs Europe's mission.

ReHubs Europe will operate from Brussels, in close partnership with EURATEX. Membership is open to any companies who wish to invest in textile waste recycling in Europe.

Source:

Euratex

Akhlaq Hussain Photo OETI
Akhlaq Hussain
28.09.2023

OETI opens sales office in Pakistan

Since 1967, ‘OETI - Institute for Ecology, Technology and Innovation’ has made a name for itself worldwide as an accredited and notified centre of excellence. With decades of experience as a service provider, the company specialises in the testing and certification of textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality. As a founding member of the international OEKO-TEX® association (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company, TESTEX AG, OETI’s network of locations spans several continents. Recently, one more branch has been added in Pakistan (headquartered in Faisalabad).
OETI Pakistan is managed by Akhlaq Hussain, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management.

Since 1967, ‘OETI - Institute for Ecology, Technology and Innovation’ has made a name for itself worldwide as an accredited and notified centre of excellence. With decades of experience as a service provider, the company specialises in the testing and certification of textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality. As a founding member of the international OEKO-TEX® association (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company, TESTEX AG, OETI’s network of locations spans several continents. Recently, one more branch has been added in Pakistan (headquartered in Faisalabad).
OETI Pakistan is managed by Akhlaq Hussain, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management.

Akhlaq Hussain’s main goal is to ‘create visibility for the OETI brand in Pakistan. We want to offer sustainable, reliable, and competitive services to Pakistan’s textile industry. My aim is to foster Pakistan’s exports by offering more sustainable certifications and training in environmental and social topics as well as due diligence in supply chains, which are in high demand in European countries.’

Markus Lang’s - OETI’s Global Head of Marketing & Sales – main goal is to ‘increase the awareness of sustainability within Pakistan’s textile and leather industry, which is also the main objective of our future development.’

More information:
Pakistan OETI
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

27.09.2023

CELLIANT meets updated requirements for Class 1 Medical Devices

The European Union (EU) has upgraded the requirements for the Class 1 Medical Device designation and Hologenix®, creators of CELLIANT®, has met the stricter requirements for this important market. This means that compliant manufacturers can continue to use the CE mark on their EU products containing CELLIANT.

Brand partners simply need to comply with the requirements that Hologenix provides, and do not have to pursue regulations on their own. Regulatory status validates the science and technology behind CELLIANT, a natural blend of bioceramic minerals that absorb body heat and reflect it back as therapeutic infrared energy.

The list of products that are now registered in the EU as Class 1 Medical Devices has grown considerably since 2014 when Hologenix first sought registration and now includes bed blankets, bed sheets, duvets, duvet covers, mattresses, mattress covers, pillows, heat-reflective upper and lower torso garments, therapeutic diabetic socks, compression socks/stockings, support bandages, wraps and limb mobilization/support skin adhesive tape.  

The European Union (EU) has upgraded the requirements for the Class 1 Medical Device designation and Hologenix®, creators of CELLIANT®, has met the stricter requirements for this important market. This means that compliant manufacturers can continue to use the CE mark on their EU products containing CELLIANT.

Brand partners simply need to comply with the requirements that Hologenix provides, and do not have to pursue regulations on their own. Regulatory status validates the science and technology behind CELLIANT, a natural blend of bioceramic minerals that absorb body heat and reflect it back as therapeutic infrared energy.

The list of products that are now registered in the EU as Class 1 Medical Devices has grown considerably since 2014 when Hologenix first sought registration and now includes bed blankets, bed sheets, duvets, duvet covers, mattresses, mattress covers, pillows, heat-reflective upper and lower torso garments, therapeutic diabetic socks, compression socks/stockings, support bandages, wraps and limb mobilization/support skin adhesive tape.  

The transition to the Medical Device Regulations in the EU for CELLIANT Class 1 medical devices includes more stringent requirements to demonstrate medical device safety for users, a refined quality management system and detailed technical documents.

More information:
Hologenix Celliant medical textiles
Source:

Hologenix, LLC

26.09.2023

ECHA: More than 5 600 comments on PFAS restriction proposal

More than 4 400 organisations, companies and individuals submitted comments and information on the proposal to restrict per- and polyfluoroalkyl substances (PFAS) in the European Economic Area.

At the end of the consultation on 25 September, ECHA had received more than 5 600 comments from more than 4 400 organisations, companies and individuals.

The comments will be checked by ECHA's scientific committees for Risk Assessment (RAC) and Socio-Economic Analysis (SEAC), and those providing relevant evidence-based information will be considered in the opinion making process.

The five countries who prepared the initial proposal will also review the consultation input and may update their initial proposal based on it.

Many comments submitted during the consultation are already published on ECHA’s website. Information indicated as confidential by the consultee is not made public. Comments received very close to the deadline are currently being processed and will be published shortly.

More than 4 400 organisations, companies and individuals submitted comments and information on the proposal to restrict per- and polyfluoroalkyl substances (PFAS) in the European Economic Area.

At the end of the consultation on 25 September, ECHA had received more than 5 600 comments from more than 4 400 organisations, companies and individuals.

The comments will be checked by ECHA's scientific committees for Risk Assessment (RAC) and Socio-Economic Analysis (SEAC), and those providing relevant evidence-based information will be considered in the opinion making process.

The five countries who prepared the initial proposal will also review the consultation input and may update their initial proposal based on it.

Many comments submitted during the consultation are already published on ECHA’s website. Information indicated as confidential by the consultee is not made public. Comments received very close to the deadline are currently being processed and will be published shortly.

Next steps
RAC and SEAC are evaluating the proposed restriction and considering the relevant information received through the consultation. The committees develop their independent, scientific opinions over a series of meetings, where draft opinions are discussed. Attention is given to all aspects and impacted sectors.

ECHA will deliver the final opinions to the European Commission in the shortest possible timeframe, while ensuring proper scrutiny by the scientific committees. Once the committees adopt their opinions, they will be communicated to the public.

The Commission, together with the EU Member States, will decide on the restriction.

Background
The restriction proposal was prepared by authorities in Denmark, Germany, the Netherlands, Norway and Sweden. It was submitted to ECHA on 13 January 2023. It aims to reduce PFAS emissions into the environment and make products and processes safer for people. The six-month consultation ran from 22 March to 25 September 2023.

Further information
•    Consultation comments
•    Restriction on the manufacture, placing on the market and use of PFAS
•    Topical page on PFAS
•    REACH restriction process

More information:
ECHA PFAS
Source:

ECHA

25.09.2023

Indorama Ventures recycles 100 billion PET bottles

Indorama Ventures Public Company Limited, a global sustainable chemical company, announced that it has recycled 100 billion post-consumer PET bottles since February 2011. This has diverted 2.1 million tons of waste from the environment and saved 2.9 million tons of carbon footprint from the product lifecycles. Demonstrating its commitment to support the establishment of a circular economy for PET, in the last ten years Indorama Ventures has spent more than $1 billion towards waste collection of used PET bottles.

Indorama Ventures Public Company Limited, a global sustainable chemical company, announced that it has recycled 100 billion post-consumer PET bottles since February 2011. This has diverted 2.1 million tons of waste from the environment and saved 2.9 million tons of carbon footprint from the product lifecycles. Demonstrating its commitment to support the establishment of a circular economy for PET, in the last ten years Indorama Ventures has spent more than $1 billion towards waste collection of used PET bottles.

The company has also committed a further $1.5 billion to expand its recycling business. To support increased recycling rates globally, Indorama Ventures has expanded its recycling facilities, infrastructure, and public education programs. The unique PET plastic used in soft drinks and water bottles is fully recyclable and is collected in practice and at scale. As a result, PET is the most recycled plastic in the world, and the company’s recycling achievements support that. Building on its position as the world’s largest producer of recycled resin used in plastic beverage bottles, Indorama Ventures is also seeking advanced technologies to deliver more recycling infrastructure globally and reduce lifecycle carbon emissions.

The company now has 20 recycling sites in Asia, the Americas, and Europe. Recent developments include doubling the capacity of a recycling site in Brazil; and the opening of PETValue, the largest bottle-to-bottle recycling facility in the Philippines, in partnership with Coca-Cola. Both part of a $300 million ‘Blue Loan’ Indorama Ventures received in 2020 from the International Finance Corporation (IFC), part of the World Bank, and Asian Development Bank. The loan has the objective of increasing recycling capacity and diverting plastic waste from landfills and oceans in Thailand, Indonesia, Philippines, India, and Brazil - countries seeking support in managing environmental waste. Indorama Ventures has also partnered with the Yunus Foundation, a leading non-profit organization promoting sustainable development with a global network, with the goal of educating one million consumers globally about recycling by 2030 with 200,000 reached so far.

Source:

Indorama