From the Sector

Reset
Archroma joins hands with Liberty Textile Mills Limited to produce life-saving PPE in Pakistan © Liberty Textile Mills Limited
Product lines of Liberty Textile Mills Limited.
07.08.2020

Archroma joins hands with Liberty Textile Mills Limited to produce life-saving PPE in Pakistan

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, has joined hands with Liberty Textile Mill Limited (Liberty), a leading producer in healthcare textiles to produce high quality personal protective equipment (PPE).

Liberty will be benefitting from Archroma’s specialty solutions for hygiene protection, and well-established technical expertise in the area of medical textiles. Amidst the COVID-19 pandemic, the PPEs manufactured by Liberty are aimed at easing the current shortage of PPEs for medical professionals in Pakistan.

Liberty carries over two decades of experience in medical textiles and exporting them all over the world. Its partnering with Archroma is a major step forward towards creating enhanced protection in the current crisis. With its advanced scientific knowledge and technical expertise, Archroma provides a complete set of specialty chemicals required to produce PPEs, in particular in the area of antimicrobial and barrier coatings. The project will assist in enhancing medical standards in hospitals, isolation centers and intensive care units, in Pakistan and, very soon, worldwide.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, has joined hands with Liberty Textile Mill Limited (Liberty), a leading producer in healthcare textiles to produce high quality personal protective equipment (PPE).

Liberty will be benefitting from Archroma’s specialty solutions for hygiene protection, and well-established technical expertise in the area of medical textiles. Amidst the COVID-19 pandemic, the PPEs manufactured by Liberty are aimed at easing the current shortage of PPEs for medical professionals in Pakistan.

Liberty carries over two decades of experience in medical textiles and exporting them all over the world. Its partnering with Archroma is a major step forward towards creating enhanced protection in the current crisis. With its advanced scientific knowledge and technical expertise, Archroma provides a complete set of specialty chemicals required to produce PPEs, in particular in the area of antimicrobial and barrier coatings. The project will assist in enhancing medical standards in hospitals, isolation centers and intensive care units, in Pakistan and, very soon, worldwide.

“By continuously challenging the status quo, we at Archroma are able to support our customers operating in or entering the area of medical textiles, with a holistic and expert approach to hygiene protection. With our collaboration with Liberty, we are so proud to be able to bring state-of-the art protection to health professionals and the general public,” comments Mujtaba Rahim, CEO of Archroma Pakistan.

“Liberty has a presence of more than five decades with high achieving accolades. Our processing units are fully equipped with latest equipment complying with international standards. We take this new partnership with Archroma as a start of building a strong relationship in the area of medical textiles. The COVID-19 pandemic has given a wake-up call to work extensively towards enhancing healthcare facilities. We are looking forward to new innovations in producing top-class PPEs,” adds Taimoor Mukaty, Director of Liberty Textile Mills Limited.

Lenzing Aktiengesellschaft (c) Lenzing Aktiengesellschaft
Lenzing Aktiengesellschaft
05.08.2020

COVID-19 impacts revenue and earnings of the Lenzing Group in the first half of 2020

  • Fiber prices and demand under pressure
  • Measures to protect employees, customers and suppliers and to keep plants operational implemented successfully
  • Joint venture Hygiene Austria established for industrial production of protective masks in the fight against the COVID-19 pandemic – new distribution channel via shop.hygiene-austria.at
  • Strategic investment projects progress according to plan – financing agreements for construction of pulp plant in Brazil concluded as planned
  • Revenue and operating result in the remaining quarters of 2020 expected to exceed that of the second quarter

Lenzing – In the first half of 2020, the Lenzing Group faced a historically difficult market environment with increased pressure on prices and volumes resulting from the COVID-19 crisis. To counteract that, Lenzing intensified its cooperation with partners along the value chains and adjusted its production volumes and sales prices to market reality.

  • Fiber prices and demand under pressure
  • Measures to protect employees, customers and suppliers and to keep plants operational implemented successfully
  • Joint venture Hygiene Austria established for industrial production of protective masks in the fight against the COVID-19 pandemic – new distribution channel via shop.hygiene-austria.at
  • Strategic investment projects progress according to plan – financing agreements for construction of pulp plant in Brazil concluded as planned
  • Revenue and operating result in the remaining quarters of 2020 expected to exceed that of the second quarter

Lenzing – In the first half of 2020, the Lenzing Group faced a historically difficult market environment with increased pressure on prices and volumes resulting from the COVID-19 crisis. To counteract that, Lenzing intensified its cooperation with partners along the value chains and adjusted its production volumes and sales prices to market reality. The disciplined implementation of the sCore TEN corporate strategy and the focus on specialty fibers continued to have a positive impact.*

*Please read the attached document for more information

More information:
Lenzing AG Covid-19 Coronakrise
Source:

Lenzing Aktiengesellschaft

28.07.2020

Autoneum: Corona-related slump in revenue – bottom point overcome

The coronavirus pandemic and its massive impact on the automotive industry led to an un-precedented market slump in the first half of 2020 and a corresponding revenue decline at Autoneum. Revenue in local currencies fell by –32.7% compared to the prior-year period, and in Swiss francs by –36.8% to CHF 730.6 million. The turnaround program for the North American sites made further progress in the first six months and is showing the targeted results. However, they were clearly overcompensated by the massive impact of the corona-virus crisis, which led to a negative net result of CHF –54.9 million despite comprehensive cost flexibilization measures.

The coronavirus pandemic and its massive impact on the automotive industry led to an un-precedented market slump in the first half of 2020 and a corresponding revenue decline at Autoneum. Revenue in local currencies fell by –32.7% compared to the prior-year period, and in Swiss francs by –36.8% to CHF 730.6 million. The turnaround program for the North American sites made further progress in the first six months and is showing the targeted results. However, they were clearly overcompensated by the massive impact of the corona-virus crisis, which led to a negative net result of CHF –54.9 million despite comprehensive cost flexibilization measures.

Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production completely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.


 Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production com-pletely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.

Autoneum promptly responded to the pandemic-related market slump by adopting extensive cost-cutting measures in all regions. These include the reduction of employee costs by, among other things, adjusting time accounts, introducing short-time work at eligible locations and temporary layoffs as well as headcount reduction, mainly among temporary workers. In addition, operating expenditures were limited to the absolutely necessary. The investment volume for 2020, already reduced from previous years, was downsized even further. Autoneum continues to benefit in this regard from the high level of investments undertaken in recent years.

 Although the coronavirus crisis and the measures taken to contain it dominated Autoneum’s course of business in the first half of 2020, the Company achieved necessary operational and financial im-provements during this period. The comprehensive turnaround program for the North American sites made further progress and is on track. Efficiency improvements already achieved there had a posi-tive effect on the figures of the first half-year, but were significantly overcompensated by the substan-tial impact of the COVID-19 crisis. Savings and cost flexibilization measures taken immediately and implemented worldwide in view of the revenue loss could not offset the ongoing, capacity-related fixed costs. This led at the Group level to a negative EBIT of CHF –31.8 million (prior-year period: CHF 16.4 million), which equates to an EBIT margin of –4.4% (prior-year period: 1.4%). The net result decreased because of the severe revenue shortfall to CHF –54.9 million (prior-year period: CHF –6.0 million).

Outlook
For 2020 Autoneum expects revenue to develop at market level. Although customers’ production volumes should increase again in the second half of 2020 compared with the first semester, latest fore-casts indicate that they will remain clearly below the level of the second half of 2019. Immediately implemented and ongoing cost reduction measures as well as further operational optimizations also within the turnaround program in North America will lead to improvements in the second half of the year. Due to the current uncertainties, a reliable statement on the net result for the full year 2020 thus cannot be made. With regard to the mid-term targets, a recovery of the profitability level is expected, but it will largely depend on the market development.

Source:

Autoneum Management AG

21.07.2020

ITM 2021: Accelerating the Textile Sector that Has Become Stationary Due to Pandemic

The ITM 2021 Exhibition, which is postponed to 22-26 June 2021 due to the coronavirus pandemic outbreak, will direct the world and Turkish textile industry, which will demonstrate a vigorous comeback in the post-pandemic period.

The ITM Exhibition, which was planned to be held between 2-6 June this year, was postponed to 22-26 June 2021 due to the troublesome Coronavirus pandemic. Participating companies in countries that had to interrupt their production, especially Italy, France, Spain, Germany and China, which were most affected by the virus, welcomed the postponement of the ITM Exhibition. The countries, holding similar opinions that it is not possible to save from the pandemic without effective drug treatment or vaccine against coronavirus, started normalization process by increasing their protective measures while fighting against the pandemic.

The ITM 2021 Exhibition, which is postponed to 22-26 June 2021 due to the coronavirus pandemic outbreak, will direct the world and Turkish textile industry, which will demonstrate a vigorous comeback in the post-pandemic period.

The ITM Exhibition, which was planned to be held between 2-6 June this year, was postponed to 22-26 June 2021 due to the troublesome Coronavirus pandemic. Participating companies in countries that had to interrupt their production, especially Italy, France, Spain, Germany and China, which were most affected by the virus, welcomed the postponement of the ITM Exhibition. The countries, holding similar opinions that it is not possible to save from the pandemic without effective drug treatment or vaccine against coronavirus, started normalization process by increasing their protective measures while fighting against the pandemic.

More information:
ITM textile machinery fair
Source:

ITM

Hygiene Austria LP GmbH is prepared with an online shop for the reintroduction of the mask requirement (c) Lenzing AG
Hygiene Austria LP GmbH Logo
21.07.2020

Hygiene Austria LP GmbH is prepared with an online shop for the reintroduction of the mask requirement

  • With shop.hygiene-austria.at, quick access to MNS, FFP2 and child masks “made in Austria” is guaranteed.

Wiener Neudorf – Hygiene Austria LP GmbH has become known for its locally produced mouth-nose protective masks, FFP2 and children's masks during the COVID-19 crisis. The company is now well prepared for the reintroduction of the mask requirement. “Especially in times of a pandemic, it is important to us at Hygiene Austria to make a contribution to the security of Austrian supply”, said Stephan Trubrich, Managing Director of Hygiene Austria LP GmbH, confidently.

All interested parties who want to prepare for their purchases in the supermarkets or their visit to public facilities but also for their holiday trips can now purchase masks of different types at the following website: https://shop.hygiene-austria.at.

  • With shop.hygiene-austria.at, quick access to MNS, FFP2 and child masks “made in Austria” is guaranteed.

Wiener Neudorf – Hygiene Austria LP GmbH has become known for its locally produced mouth-nose protective masks, FFP2 and children's masks during the COVID-19 crisis. The company is now well prepared for the reintroduction of the mask requirement. “Especially in times of a pandemic, it is important to us at Hygiene Austria to make a contribution to the security of Austrian supply”, said Stephan Trubrich, Managing Director of Hygiene Austria LP GmbH, confidently.

All interested parties who want to prepare for their purchases in the supermarkets or their visit to public facilities but also for their holiday trips can now purchase masks of different types at the following website: https://shop.hygiene-austria.at.

Source:

Lenzing Aktiengesellschaft

AFFIX Labs launches world’s first long-lasting surface treatment to kill the coronavirus © 2020 AFFIX Labs
Si-Quat by AFFIX Labs is a versatile anti-viral surface treatment that has been scientifically proven to last for months on any surface or textile while effectively killing the COVID-19 pathogen upon contact. Si-Quat by AFFIX Labs can be implemented onto any surface.
20.07.2020

AFFIX Labs launches world’s first long-lasting surface treatment to kill the coronavirus

  • Si-Quat by AFFIX Labs is a versatile anti-viral surface treatment that has been scientifically proven to last for months on any surface or textile while effectively killing the COVID-19 pathogen upon contact.
     

Helsinki - Leading chemical binding expert AFFIX Labs has harnessed its global experience in disease prevention to create the first long-lasting surface treatment proven to kill COVID-19. Si-Quat combines a safe and well-established disinfectant and a proprietary chemical binding technique, so that the active ingredient can kill viruses, including SARS-COV-2. Testing at Portugal’s Biochemistry Institute at the University of Lisbon proves that Si-Quat effectively kills the COVID-19 pathogens that it comes into contact with.

  • Si-Quat by AFFIX Labs is a versatile anti-viral surface treatment that has been scientifically proven to last for months on any surface or textile while effectively killing the COVID-19 pathogen upon contact.
     

Helsinki - Leading chemical binding expert AFFIX Labs has harnessed its global experience in disease prevention to create the first long-lasting surface treatment proven to kill COVID-19. Si-Quat combines a safe and well-established disinfectant and a proprietary chemical binding technique, so that the active ingredient can kill viruses, including SARS-COV-2. Testing at Portugal’s Biochemistry Institute at the University of Lisbon proves that Si-Quat effectively kills the COVID-19 pathogens that it comes into contact with.

“Tragedies have unfolded across the globe, affecting different countries at varying degrees. The second waves of COVID-19 are just appearing on the horizon. This long-lasting surface treatment is a viable, accessible solution across cultures. By killing the COVID-19 pathogen on surfaces before it can infect people, the Si-Quat solution is a game changer. It can provide increased security and peace of mind to your communities, as well as your customers,” says Tom Sam, CEO of AFFIX Labs.

Si-Quat has been tested to kill 99.99% of microbes within minutes, while still being fully safe to touch. Proven to be effective for about a month on frequently touched surfaces, it is the longest lasting anti-viral surface treatment available to reduce the spread of the novel coronavirus. The product is non-corrosive, free from silver salts and heavy metal nanoparticles, and perfectly safe to touch.

Several major agencies around the globe have already accepted quaternary ammonium, the main ingredient in the surface coating, to be an effective surface treatment against the novel coronavirus, including the World Health Organization (WHO), the US Environmental Protection Agency, the American Chemistry Council (ACC) and the European Chemical Agency (ECHA).

Si-Quat was invented in January 2020 by the AFFIX Labs’ Repeltec development team to specifically help combat the COVID-19 outbreak. The product is based on the trusted and safe disinfectant quaternary ammonium, which is chemically bound to align silane quaternary ammonium molecules (silane quats) in a highly effective manner. Positively charged nitrogen particles then actively attract viruses and bacteria, penetrating the membranes and killing them within minutes.

Rigorous testing has shown Si-Quat to adhere to almost any surface, performing as the most durable surface treatment commercially available. Due to its incredibly strong layer, the solution only wears down on surfaces after thousands of touches or multiple cleaning cycles. This means that on heavily used surfaces, such as door handles and counters, Si-Quat will be effective for about a month. On rarely touched surfaces like walls, it has the potential to protect for years. Since the product is incredibly easy to apply, technicians require minimal training and only basic protection. They simply have to brush or spray Si-Quat onto the surface and allow it to dry for 6 hours.

“Other sanitising solutions require reapplication to every surface several times daily, interrupting business operations. This results in additional costs and disruptions at a time when many companies are already struggling,” Sam explains. “By combining proven efficacy, safety and long durability, Si-Quat is emerging as an important weapon in the battle against the spread of COVID-19.”

AFFIX Labs has begun to roll out the distribution of Si-Quat across the globe, with new regions being serviced every week. It is currently looking for distribution partners in local markets.

The project leading to the development of Si-Quat included funding from the European Institute of Innovation and Technology, a body of the European Union, under the Horizon 2020 Framework for Research and Innovation.

20.07.2020

Screen Print India in Mumbai to re-open doors in March 2021

Messe Frankfurt India has announced new dates for the Mumbai edition of Screen Print India - the leading trade fair for screen, textile, sublimation and digital printing technologies The exhibition will be held in parallel with Gartex Texprocess India, from 19 – 21 March 2021 at the Bombay Exhibition Centre in Mumbai. With the gradual re-opening of commercial activities and businesses, the co-located fairs will enable the industry to channel their efforts back towards business development and cater to the needs of screen printing, textile and garment manufacturing industry players as it gears up to bring the production and manufacturing value chain under one roof.
 

Messe Frankfurt India has announced new dates for the Mumbai edition of Screen Print India - the leading trade fair for screen, textile, sublimation and digital printing technologies The exhibition will be held in parallel with Gartex Texprocess India, from 19 – 21 March 2021 at the Bombay Exhibition Centre in Mumbai. With the gradual re-opening of commercial activities and businesses, the co-located fairs will enable the industry to channel their efforts back towards business development and cater to the needs of screen printing, textile and garment manufacturing industry players as it gears up to bring the production and manufacturing value chain under one roof.
 
While the focus segments under Gartex Texprocess India will draw attention to innovations in garmenting & apparel machinery, the product launches and live demos at Screen Print India will enable business visitors and traders to track technological advances in digital textile and screen-printing technologies. The secure, business-focused ambience will enable both printing and textile sector players to showcase, source and strengthen their supply chains and keep pace with the shifting demand for screen printing, textile printing, digital and sublimation technologies across other sectors.
 
Screen Print India will also host a series of sessions on processes and innovations related to the graphics industry. Another key highlight of this successful trade fair is the Screen Print Excellence Awards that upholds a strong tradition of honouring technology inventors and trailblazers within the screen-printing industry. With this in mind, the Mumbai edition will curate a special “SPI Gallery” to showcase award winning pieces of screen-printing excellence.

Source:

Messe Frankfurt, India