From the Sector

Following its successful beginnings in summer 2018 and its expansion in January 2019, TRADE UNION will be developed yet further as a dedicated space for selected brands and agencies.
 
“TRADE UNION is very close to our hearts,” explains SEEK Director Maren Wiebus. “Being able to work together to fill a space with life, interact with customers and products, and tell authentic stories in a laid-back, relaxing atmosphere – this open-minded, collaborative approach is ultra-modern and of the minute in its simplicity. We are all in the same big boat and can consider ourselves lucky that colleagues and customers are and have become friends. Together, we can achieve a lot this way.”

It has always been integral to SEEK’s DNA to continually work with partners and friends to develop new concepts that are perfectly suited to the demands of the market. The carefully curated setting of TRADE UNION, featuring brands such as Eat Dust, Porter-Yoshida & Co and Knickerbocker, is especially popular with the top buyers.
 
Felix Engelmann has supported the concept right from the off through his marketing agency Haptiques, and is full of passion and on board again with the concept this season.
“The TRADE UNION concept really came off for us in January. We worked well with our partners; the vibe was positive and nicely relaxed. I’m expecting the atmosphere in the summer to be just as fantastic and I’m sure it’ll be a good occasion with friends, partners and employees.”
 
In July, buyers can look forward to an expanded portfolio including Red Wing Shoes, a brand from Minnesota. European Marketing Manager Rik van Dijk comments:
“We can't wait to attend the inspiring setting, because our buyers really feel at home there. We need a location where you can take a step back, find a quiet place to sit and talk to everyone. The extra space at the TRADE UNION guarantees this. We’ve only heard good things from friendly brands and we’re really looking forward to the trade show.”

• New textile printer delivers unparalleled flexibility and unprecedented application capabilities
• Mimaki to showcase a wealth of technological breakthroughs and creative opportunities to drive digital print adoption in textiles

Mimaki Engineering, a leading manufacturer of inkjet printers and cutting systems, today announces that it will showcase its broad portfolio of cutting-edge digital print technologies at ITMA 2019 (20-26 June 2019, Fira de Barcelona, Spain). This will include the first global showing of a brand-new hybrid digital textile printer, uniquely featuring both direct-to-textile and direct-to-transfer print capabilities. Crucially, these features enable textile and garment manufacturers to achieve unparalleled flexibility and enhanced application opportunities for increased business growth.

To facilitate these benefits, the new Mimaki printer also allows multiple sets of inks to be loaded simultaneously, supporting increased fabric range versatility and maximum product variety.

As the future of textile printing and for further production benefits, Mimaki will also give a sneak preview of its new and upcoming TA Job Controller software, specifically designed for textile production environments. For use on Mimaki’s successful, EDP-awarded Tiger Pro Series and Rimslow TR Series – and all Mimaki textile printers –, TA Job Controller enables users to connect one-on-one to the RIP and other devices, for an automated workflow from design to pre-print, print and post print processes.

A. Monforts Textilmaschinen GmbH & Co. KG will demonstrate a range of new advances made possible by Industry 4.0 techniques at ITMA 2019 in Barcelona, Spain, from June 20-26.

At stand D101 in Hall 2, visitors will discover the possibilities of ‘digital twin’ capability – now being made available for all Monforts machine systems – and that by exploiting the latest advanced sensor technology, comprehensive technical machine data can now be virtually mapped in the cloud in real time. The data can be easily accessed using the new Monforts Smart Support and Smart Check apps for an instantaneous status overview. All specifications relating to machine performance and the production process can be mapped, to enable vastly simplified and targeted analysis for controlled planning and production. Insights harnessed from such analysis can be used to optimise the actual production process. At the same time, potential sources of error can be anticipated and eliminated, enabling improved machine availability while considerably minimising downtime.

Parts prediction
In addition, the digital twin system provides information on the individual wear parts of a system, such as, for example, converters or gears. “Operators and mill managers are informed by Smart Check sensors when maintenance or the replacement of key components will be required, well ahead of time,” explains Monforts Vice President Klaus A. Heinrichs. “Direct access to the integrated Monforts webshop allows users to instantly order such parts when they are needed, virtually preventing machine downtime.” On request, Monforts can also virtually monitor machine performance and pro-actively alert customers to the need for preventative action. In such cases, however, data is only ever called from the cloud by Monforts when customers have given their full consent, in the interests of data security. Data from Smart Check, for example, can even be used to analyse a system’s energy requirements, allowing machine operation to be optimised by tailoring production runs to the peaks and troughs of electricity costs.

• BASF’s photopolymer materials for advanced manufacturing applica-tions qualify for early development access in new WAV™ technology
• BASF’s Ultracur3D ST 45 reactive urethane photopolymer fulfills the re-quirements of functional applications

BASF 3D Printing Solutions is to provide innovative additive manufacturing materi-als to Paxis LLC for their new WAV™ technology. This is currently in development and is designed to meet the needs of additive manufacturing users, advanced manufacturing as well as traditional manufacturing markets. The WAV™ (Wave Applied Voxel) process was created with the end-user firmly in mind in an effort to solve trapped volume issues of current liquid resin-based technologies.

"The combination of BASF materials and Paxis’s system will revolutionize the way end-applications are designed, manufactured and integrated into production", states Arnaud Guedou, Business Director Photopolymer Solutions, BASF 3D Printing Solutions. "With the new WAV™ technology, Paxis extends the application possibilities of additive manufacturing to a much broader scope than current technologies allow. What’s more, equipment and processes can be adapted to requirements that were previously unimaginable in additive manufacturing. BASF’s innovative photopolymer materials are a perfect match for Paxis's WAV™ technology."

BASF’s Ultracur3D ST 45 reactive urethane photopolymer for tough applications has been designed to fulfill the requirements of functional applications for high accuracy and mechanical strength, where existing 3D printing materials often reach their limitations. Ultracur3D ST 45 can be used to produce high performance functional parts by using a wide variety of equipment, such as stereolithography (SLA), digital light processing (DLP), or Liquid Crystal Display (LCD).

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, received the prestigious Technical Innovation Award from the Flexographic Technical Association (FTA) for its recently introduced SteadyPrint print-stabilization technology. This award was presented May 5, 2019, at the FTA Forum 2019 awards banquet held in New Orleans.

SteadyPrint, now part of PCMC’s Fusion and ELS Max flexographic presses, couples innovative patented mechanical designs with cutting-edge disturbance-cancelling algorithms that suppress disturbances associated with the hard edge, largely removing the impact of bounce in flexographic printing. The press automatically learns when the disturbance occurs on each job and implements the cancellation algorithm to minimize or eliminate the impact on print quality.

“We are extremely excited to be a recipient of the 2019 FTA Technical Innovation Award,” said Rodney Pennings, PCMC’s Printing, Coating and Laminating Sales Director. “The entire PCMC team has worked very hard in developing SteadyPrint over the past couple of years. It is an innovation that we are quite proud of, and we appreciate the accolades that showcase SteadyPrint within the package-printing industry. Winning this award in the year we are celebrating our 100-year anniversary is also incredibly meaningful.”

A wide range of new technologies will be demonstrated by Vandewiele at the ITMA 2019 textile machinery show in Barcelona from June 20-26, including the latest RCE2+ digital carpet weaving machine.

All Vandewiele technologies are now being equipped for machine-to-machine interaction and learning, as part of the company’s comprehensive TEXconnect programme.

Meeting new industry needs
As a leader in complete carpet manufacturing systems – including BCF extrusion lines, heat setting systems and carpet weaving and tufting machines – Vandewiele has rapidly responded to the evolving needs of the textile industry for smaller and customised production runs, the most challenging of designs, and faster and more sustainable manufacturing.

The company’s sensors, software programmes and servers have become increasingly sophisticated as part of the TEXconnect program, and the real-time data from different machines – across connected manufacturing sites and across different countries and even continents – can be collected and shared. Digital models of both machines and production processes can be created and analysed for the optimisation of production settings, to vastly improve scheduling and planning and also make considerable savings in raw materials and energy consumption.

Virtual and remote control now allows for the Big Data analysis that is propelling the industry forward and will pave the way for AI applications. For carpet manufacturers, all of this is leading to the creation of truly Smart Factories.

RCE2 carpet weaving
The new RCE2+ Rug and Carpet Expert weaving machine is a truly digital workhorse, with all yarns continuously controlled and measured and the difficult bobbin changes of the past completely eliminated. This is as a result of Vandewiele’s latest Fast Creel, with the feed and tension of each pile yarn controlled by individual servomotors.

The pile yarns are now fed directly into the machine without having to pass pile-stop motions, to both increase efficiency and eliminate any waste yarns, while achieving previously unreachable industrial speeds.

The filling enters the machine smoothly via the latest IRO X3 winders, heavy duty filling brakes with multi lamellas, an active yarn recuperator and a high speed weft mixer, where again, all tensions are set electronically. Vandewiele’s servo-driven heddle frames (Smart Frames) are meanwhile already well proven in the industry.

TEXconnect further provides readily-available data on all yarn consumption, tension and threading, and then will supply the predictive maintenance that is paving the way to self-learning carpet weaving machines.

All of this would be unnecessary, if it didn’t result in allowing manufacturers to make the highest quality carpets at the most economic prices ever, with savings on the highest-bulk pile yarns from the Vandewiele extrusion lines, reduced waste yarns in the creel and industrial production speeds that have never before been attained.

Companies get a close-up of new consumer buying journey and explore how they can meet challenges with Lectra’s latest technologies and industry experts

Lectra cements its position as a fashion industry opinion maker by leading a much-awaited discussion on new consumer behavior at its latest fashion event, ‘Winning Over the New Fashion Consumer’ in Bordeaux-Cestas, France.

More than 75 industry insiders and market experts from 14 countries convened at Lectra’s International Advanced Technology and Conference Center (IATC) for two days to examine how the digital age is bringing about major shifts in consumer behavior. Today’s digitally attuned consumers have become co-creators in the production process, changing the fashion landscape entirely.

The keynotes, live demonstrations, and customer testimonials highlighted the importance of process digitization and data analysis for meeting new consumer needs. The event kicked off with two keynote speakers. Peter Jeavons, Managing Director of First Insight Europe, stressed the importance of using data to understand the hyperconnected fashion consumer. Craig Crawford, Strategist and Founder of CrawfordIT, outlined the arising challenges and opportunities from these changes, and urged fashion companies to embrace digital transformation internally by cultivating a conducive environment for it.

Beyond just understanding the new fashion consumer, the event stressed on the importance of leveraging data to deliver customer-centric services and products. Lectra presented their responses to this challenge in the form of two new major solutions, Kubix Link and Fashion on Demand by Lectra.

A focus on customer service, aligned with the drive to constantly innovate, has long ensured that the member companies of TMAS – the Swedish texile machinery manufacturers’ association – stay well ahead of the curve.

“All of the Swedish textile machinery companies are doing really well in major markets such as Europe, China, India and the USA,” says TMAS Secretary General Therese Premler-Andersson. “They are now gathering forces to prepare for the most important show – ITMA 2019 in Barcelona in June. I expect to see new players and partnerships as we enter the industry 4.0 era for real. We are ready to display an even higher degree of the real time monitoring of processes, automation, flexible customisation, and the incorporation of robots into production lines.  Our customers expect a lot of in terms of knowledge and our ability to customise and offer turnkey solutions.”

The forward-looking attitude of the Swedish companies is perhaps best summed up by Reimar Westerlind, the owner, since 1961, of ACG Gruppen.
At the age of 90, Reimar still travels to his office every day to oversee the operations of the diverse companies operating under the ACG umbrella.
“Everything now is about automation and digitisation,” he says. “We have to be on that track or we will be lost – innovate or die.”

Robotics
One ACG Gruppen company moving rapidly forward with new innovations in this area is ACG Kinna, which at ITMA 2019 will be providing dramatic live demonstrations of its new robotic pillow filling system.
This has the ability to fill and finish some 3,840 pillows per eight-hour shift, which is a considerable improvement on what is currently possible with existing systems, resulting in significant savings in both labour and energy for busy home textile businesses.

At ITMA 2019, Eton will be demonstrating a complete material handling solution with advanced software providing real-time information covering every aspect of the process.
“Our systems are a natural fit with the major Industry 4.0 networked manufacturing plants that are now being constructed worldwide for sectors such as the garment and home textiles manufacturing and automotive industries,” says Eton’s Sales and Commercial Director Roger Ryrlén.

Sensors
Advanced senor developments are playing a large part in moving many areas of the textile industry forward too.
Eltex of Sweden, for example, is achieving considerable success with its yarn fault detection and tension monitoring systems across a range of sectors, including the tufting of carpets, the creeling of woven materials and even the production of woven reinforcements for the composites industry.

At successive ITMA shows, IRO AB has also consistently introduced new milestones in the field of yarn feeding technology for weaving machines, and ITMA 2019 will be no exception.
“Following significant investment in our R&D capabilities, we have been making great progress in further boosting the efficiency and performance of our expanding X3 range,” says IRO AB Managing Director and Chairman of TMAS Mikael Äremann. “I can’t remember a time since the 1980s when we had so many new innovations to unveil at an ITMA, and I’m greatly looking forward to the positive response to them we are anticipating in Barcelona this June.”

Resource savings
ITMA 2019 will meanwhile see the launch of TexCoat G4 – the next generation of Baldwin Technology’s non-contact precision application system for fabric finishing. The TexCoat G4 enables a continuously high-quality and productive textile finishing process with zero chemistry waste and minimised water and energy consumption.
The non-contact spray technology brings a range of advantages including single or double-sided application,  the elimination of Foulard bath contamination, low wet pick-up levels leading to the elimination of drying steps, zero chemistry waste in changeovers of chemistry, colour or fabric, and the possibility of batch reporting, visibility of pad loading, chemical usage etc.

Other TMAS companies exhibiting in Barcelona include Texo AB, whose wide-width weaving looms make the belts for machines on which half of the world’s paper is made, ES-Automatex, which specialises in bespoke automation concepts and Svegea, a company leading the field in a number colarette machines and cutting and slitting equipment.

“At the last ITMA in 2015 in Milan, there was much talk about Industry 4.0 technologies but certainly from the perspective of TMAS, ITMA 2019 will be the place for concrete solutions as to how data and the new tools we have available can be exploited to the full,” says Therese Premler-Andersson. “There is already much more networking between the companies, with software very much the enabler and common interfaces bringing ideas closer together. We are greatly looking forward to further exchanges of ideas when meeting with customers old and new in Barcelona.”

The innovative technology addresses the growing need for on-demand textile design and production

Kornit Digital, a global market leader in digital textile printing innovation, has announced the introduction of the new Kornit Presto, the only industrial single-step solution for direct-to-fabric printing. The Kornit Presto solution eliminates the need for pre and post treatment of fabric and allows for high-quality printing on a broad variety of fabric types and applications. The Kornit Presto does not consume water in the printing process, making it a environmentally friendly solution.

The new Kornit Presto comes with the NeoPigment Robusto, a Pigment-based ink. Implemented into the Kornit NeoPigmentTM process, the Robusto provides above industry standard wash and rub results and exceptional color fastness across a wide fabric and application range. The Robusto enjoys faster physical and chemical bonding characteristics, enabling a significantly shorter curing time, while providing quality and a wide color gamut.

The Kornit Presto solution suits a wide range of business and application needs in a variety of industry segments, including fast growing segments within the on-demand fashion and home décor markets. It is a highly productive solution, available in multiple configurations and able to print 450 square meters per hour.

Gart Davis, CEO at Spoonflower, the world’s first web-based service for custom, on-demand fabric and design creation and a long-time Kornit customer, commented, “We were thrilled to be able to test the new system and found the Presto to be in a class by itself; it prints beautifully on all kinds of fabrics, in a single-step, with an environmentally friendly dry process, and now at a multiple of productivity.  Our partnership with Kornit continues to be fundamental to our mission to make custom fabric accessible to designers, creative individuals and small businesses all over the world. We can’t wait to get going.”

At the 128th Annual General Meeting of Rieter Holding Ltd. on April 4, 2019, 502 shareholders, who represent 63.8% of the share capital, participated. A dividend of CHF 5.00 per share was agreed. The shareholders approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for the fiscal year 2020.

The Chairman of the Board of Directors, Bernhard Jucker, and the members of the Board of Directors This E. Schneider, Michael Pieper, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi and Luc Tack were confirmed for an additional oneyear term of office.

Furthermore, This E. Schneider, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also re-elected for a one-year term of office.

Shareholders also adopted all other motions proposed by the Board of Directors, namely approval of the annual report, the financial statements and the consolidated financial statements for 2018, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review.