From the Sector

Reset
15 results
01.08.2024

Mahlo at Febratex 2024: Advancements in straightening technology and process control

Mahlo GmbH + Co. KG announces its participation in the Febratex trade show from August 20 to 23, 2024. The event will take place in Blumenau, Brazil, a hub for textile and garment production.

The company will present its latest advancements in straightening technology and process control. The booth will be jointly hosted by Mahlo’s sales agency MBR Textile and Christian Matthias, the head of Mahlo’s application department. They will be available to provide in-depth knowledge and demonstrations of Mahlo's solutions.

Mahlo GmbH + Co. KG announces its participation in the Febratex trade show from August 20 to 23, 2024. The event will take place in Blumenau, Brazil, a hub for textile and garment production.

The company will present its latest advancements in straightening technology and process control. The booth will be jointly hosted by Mahlo’s sales agency MBR Textile and Christian Matthias, the head of Mahlo’s application department. They will be available to provide in-depth knowledge and demonstrations of Mahlo's solutions.

Mahlo’s technology addresses the critical needs of textile manufacturers, ensuring high-quality production with minimized distortion and optimized processes. The company’s automatic straightening system guarantees thread-
straight fabric across various applications, thanks to its modular design that can be tailored to individual production environments. Additionally, Mahlo offers several process control systems designed to optimize stenter frame operations by measuring and controlling parameters such as dwell time, thread density, and residual moisture. These systems help manufacturers improve textile quality, save raw materials, and reduce energy costs.

Source:

Mahlo GmbH & Co. KG

31.05.2024

Tintoria Finissaggio 2000 invests in Mahlo's automatic straightening system

Tintoria Finissaggio 2000 is one of the most important Italian companies in the textile finishing sector. Founded in 1973 in Masserano in the textile district of Biella, the company offers the complete range of dyeing of all types of fibres, finishing, digital printing, lamination and membrane lining. These processes are used to give fabrics certain properties, such as colour, pattern, softness, shine or waterproofness.

At Tintoria Finissaggio 2000, customers benefit from the fact that all processes are handled under one roof, from design support to the finishing of fabrics, combining decades of experience with the new possibilities of lamination and digital printing. The dyeing plant in Masserano is a state-of-the-art facility that fulfils the strictest environmental standards. In general, Tintoria Finissaggio 2000 continuously invests in state-of-the-art technologies and production facilities in order to achieve high-quality results while ensuring sustainable production processes.

Tintoria Finissaggio 2000 is one of the most important Italian companies in the textile finishing sector. Founded in 1973 in Masserano in the textile district of Biella, the company offers the complete range of dyeing of all types of fibres, finishing, digital printing, lamination and membrane lining. These processes are used to give fabrics certain properties, such as colour, pattern, softness, shine or waterproofness.

At Tintoria Finissaggio 2000, customers benefit from the fact that all processes are handled under one roof, from design support to the finishing of fabrics, combining decades of experience with the new possibilities of lamination and digital printing. The dyeing plant in Masserano is a state-of-the-art facility that fulfils the strictest environmental standards. In general, Tintoria Finissaggio 2000 continuously invests in state-of-the-art technologies and production facilities in order to achieve high-quality results while ensuring sustainable production processes.

Tintoria Finissagio 2000 also focused on innovation when equipping a new stenter frame. The company opted for the latest development from German machine manufacturer Mahlo GmbH + Co. KG: the Orthopac RXVMC-20 automatic straightening system. The new straightening concept is specially designed for processing textiles with high distortion dynamics, i.e. textiles with highly variable distortion. Two individually controlled and driven straightening modules with a total of three bow and four skew rollers ensure that bow and skew distortions are corrected in small steps. The control concept is also new. A scanner group at the infeed of the straightener detects distortions even before they reach the correction rollers. This means that the rollers are brought directly into position and the fabric is corrected from the very first centimetre. A scanner group at the outfeed also recognises any residual distortion, which is then corrected on the second straightening module.

27.05.2024

Mahlo at ITM

Mahlo will be showcasing its comprehensive portfolio of solutions with its partner Masters Limited at the upcoming ITM trade show, scheduled from 4th to 8th June in Istanbul.

The Turkish textile industry continues to experience growth and innovation, making events like ITM crucial for industry players to connect and explore advancements. Fabric distortion remains a common challenge in textile production, impacting product quality and efficiency. Additionally, sustainability and resource optimization are increasingly vital considerations for manufacturers aiming to maintain profitability.

Mahlo will be showcasing its comprehensive portfolio of solutions with its partner Masters Limited at the upcoming ITM trade show, scheduled from 4th to 8th June in Istanbul.

The Turkish textile industry continues to experience growth and innovation, making events like ITM crucial for industry players to connect and explore advancements. Fabric distortion remains a common challenge in textile production, impacting product quality and efficiency. Additionally, sustainability and resource optimization are increasingly vital considerations for manufacturers aiming to maintain profitability.

Mahlo offers a range of solutions tailored to different textile structures, from heavy carpets to delicate fabrics. The company's products encompass everything from distortion detection sensors to fully automated straightening systems, customizable to individual production requirements. Moreover, Mahlo's latest generation of straighteners, sensors, and control loops are equipped for Industry 4.0 integration, enabling remote access and real-time monitoring for enhanced efficiency and productivity.
As the textile industry continues to evolve, Mahlo remains at the forefront, providing innovative solutions to meet the changing demands of modern production.

Source:

Mahlo GmbH + Co. KG

Preview Igatex (c) Mahlo GmbH & Co. KG
24.04.2024

Mahlo at Igatex Trade Show, Pakistan

Mahlo GmbH + Co. KG announced its participation in the upcoming Igatex Trade Show, scheduled from 1 to 5 May in Lahore, Pakistan. Mahlo, known for its innovative solutions in the textile industry, will present its latest advancements aimed at improving quality, efficiency, and sustainability in textile manufacturing.

Pakistan ranks among the world's top textile-producing nations, making the Igatex Trade Show a significant platform for industry players to convene, share insights, and explore technologies.

“The visitors can discover our various weft straightening solutions, suitable for different kind of textile applications”, says Clemens Kaplan, Product Manager Textile at Mahlo. He is on site together with the service partners of Mahlo Pakistan and Al Ameen Trading Corporation. “A process control systems tailored to the needs of the customer helps to regulate parameters such as dwell time, exhaust air or temperature. With its commitment to sustainability, Mahlo offers eco-friendly solutions aligned with the industry's growing emphasis on green production from energy-efficient equipment to resource-saving process optimization tools.

Mahlo GmbH + Co. KG announced its participation in the upcoming Igatex Trade Show, scheduled from 1 to 5 May in Lahore, Pakistan. Mahlo, known for its innovative solutions in the textile industry, will present its latest advancements aimed at improving quality, efficiency, and sustainability in textile manufacturing.

Pakistan ranks among the world's top textile-producing nations, making the Igatex Trade Show a significant platform for industry players to convene, share insights, and explore technologies.

“The visitors can discover our various weft straightening solutions, suitable for different kind of textile applications”, says Clemens Kaplan, Product Manager Textile at Mahlo. He is on site together with the service partners of Mahlo Pakistan and Al Ameen Trading Corporation. “A process control systems tailored to the needs of the customer helps to regulate parameters such as dwell time, exhaust air or temperature. With its commitment to sustainability, Mahlo offers eco-friendly solutions aligned with the industry's growing emphasis on green production from energy-efficient equipment to resource-saving process optimization tools.

Source:

Mahlo GmbH & Co. KG

Mahlo at IndoIntertex in Jakarta (c) Mahlo GmbH + Co. KG
15.03.2024

Mahlo at IndoIntertex in Jakarta

Mahlo GmbH + Co. KG exhibits its technologies at the upcoming IndoIntertex trade show in Jakarta. The event, scheduled from March 20 to March 23, will serve as a platform for Mahlo and its long-term partner agency Agansa to showcase its solutions tailored to meet the evolving needs of the Indonesian textile sector.

With a rich history in textile manufacturing and a skilled workforce, Indonesia has emerged as a key player in the global textile landscape. The country's strategic location, coupled with favorable government policies, has fueled the growth of its textile sector, attracting investments and fostering technological advancements.

Mahlo's participation in the IndoIntertex trade show underscores its commitment to supporting the Indonesian textile industry with solutions designed to enhance quality, efficiency, and productivity. Visitors to Mahlo's booth can expect to explore a range of offerings, including measurement and control systems, process automation solutions, and expert consultancy services.

Mahlo GmbH + Co. KG exhibits its technologies at the upcoming IndoIntertex trade show in Jakarta. The event, scheduled from March 20 to March 23, will serve as a platform for Mahlo and its long-term partner agency Agansa to showcase its solutions tailored to meet the evolving needs of the Indonesian textile sector.

With a rich history in textile manufacturing and a skilled workforce, Indonesia has emerged as a key player in the global textile landscape. The country's strategic location, coupled with favorable government policies, has fueled the growth of its textile sector, attracting investments and fostering technological advancements.

Mahlo's participation in the IndoIntertex trade show underscores its commitment to supporting the Indonesian textile industry with solutions designed to enhance quality, efficiency, and productivity. Visitors to Mahlo's booth can expect to explore a range of offerings, including measurement and control systems, process automation solutions, and expert consultancy services.

Source:

Mahlo GmbH + Co. KG

19.01.2024

Mahlo joins forces with Brückner Textile Technologies at Colombiatex

Mahlo GmbH + Co. KG will participate in the Colombiatex textile show, held in Medellin from 23 to 25 January. This year, Mahlo will be joining forces with Brückner Textile Technologies to present their solutions for the textile production sector at their joint booth.

Both companies appreciate the power of Colombia’s textile industry. Textile is one of the most important industrial sectors in the Latin American country with an export value of clothing of more than 600 million US dollars. The United States are also the main export destination for apparel products. At Colombiatex 2024, Mahlo's Head of Sales, Thomas Höpfl, will be present to share insights and discuss how Mahlo’s innovative technologies can address the specific challenges faced by Colombian textile manufacturers. Sustainability of process efficiency being among the most pressing ones.

Mahlo GmbH + Co. KG will participate in the Colombiatex textile show, held in Medellin from 23 to 25 January. This year, Mahlo will be joining forces with Brückner Textile Technologies to present their solutions for the textile production sector at their joint booth.

Both companies appreciate the power of Colombia’s textile industry. Textile is one of the most important industrial sectors in the Latin American country with an export value of clothing of more than 600 million US dollars. The United States are also the main export destination for apparel products. At Colombiatex 2024, Mahlo's Head of Sales, Thomas Höpfl, will be present to share insights and discuss how Mahlo’s innovative technologies can address the specific challenges faced by Colombian textile manufacturers. Sustainability of process efficiency being among the most pressing ones.

06.11.2023

Mahlo presents new solutions at ITMA Asia 2023

Mahlo GmbH + Co. KG will present its systems and solutions for efficient and high-quality textile production and finishing together with Shanghai Kuantex at ITMA Asia (November 19 and 23). The focus will be on the machine manufacturer's new straightening concept, the Orthopac RXVMC.

"In the new straightening concept, special attention was paid to the straightening mechanics and their interaction with the analysis electronics of the probe system," explains Sales Manager Thomas Höpfl. The control concept is also new. A probe group at the leveler infeed detects distortions even before they reach the correction rolls. In this way, the rolls are brought directly into position and the fabric is corrected from the very first centimeter. A scanner group at the outfeed also detects possible residual distortion, which is corrected at the second straightening module. This enables an even more precise and faster response when it comes to reacting to rapidly changing distortions. The Orthopac RXVMC therefore shows its full strength when straightening knitwear and fabrics sensitive to distortion.

Mahlo GmbH + Co. KG will present its systems and solutions for efficient and high-quality textile production and finishing together with Shanghai Kuantex at ITMA Asia (November 19 and 23). The focus will be on the machine manufacturer's new straightening concept, the Orthopac RXVMC.

"In the new straightening concept, special attention was paid to the straightening mechanics and their interaction with the analysis electronics of the probe system," explains Sales Manager Thomas Höpfl. The control concept is also new. A probe group at the leveler infeed detects distortions even before they reach the correction rolls. In this way, the rolls are brought directly into position and the fabric is corrected from the very first centimeter. A scanner group at the outfeed also detects possible residual distortion, which is corrected at the second straightening module. This enables an even more precise and faster response when it comes to reacting to rapidly changing distortions. The Orthopac RXVMC therefore shows its full strength when straightening knitwear and fabrics sensitive to distortion.

Also contributing to high-quality textile production and finishing is the Famacont PMC for controlling weft and stitch course density, which will also be on show at ITMA Asia. The Famacont PMC-15 uses a sensor to measure the yarn or stitch density and compares it with the target value stored in the recipe data management system. The detected deviation of the yarn density from the target value is used to fully automatically regulate the leading during the needling process on the stenter frame. Interested parties can have the mode of operation explained to them at the Mahlo booth with the help of a demo tower and their own or provided fabric samples.

Another major topic remains Industry 4.0, because the best measured data is of no use if it cannot be utilized. Mahlo has continuously developed its digital environment mSmart. "Our systems generate data that the customer can use immediately to regulate goods on-line. At the same time, all measured values are backed up in our data management system mLog enhanced and can be retrieved at any time. With this historical data, processes can be optimized and weak points in the process can be minimized," explains Sales Manager Thomas Höpfl.

Orthopac RXVMC Photo Mahlo GmbH + Co. KG
Orthopac RXVMC
05.10.2023

Mahlo: New straightening concept

The new Orthopac RXVMC-20 automatic straightening system for forward control of knitwear with strong distortions can remove distortions in textile webs even faster and more precisely.

"With the new straightening concept, special attention was paid to the straightening mechanics and their interaction with the analysis electronics of the scanner system," explains Head of Sales Thomas Höpfl. Two individually controlled and driven straightening modules with a total of four bow and three skew rollers ensure that the correction of bow and skew distortions takes place in small steps. The control concept is also new. A scanner group at the infeed of the straightening machine detects distortions even before they reach the correction rollers. This way, the rollers are brought directly into position and the fabric is corrected from the very first centimetre. A scanner group at the outlet also detects possible residual distortion, which is corrected at the second straightening module. This enables an even more precise and faster response when it comes to reacting to rapidly changing distortions.

The new Orthopac RXVMC-20 automatic straightening system for forward control of knitwear with strong distortions can remove distortions in textile webs even faster and more precisely.

"With the new straightening concept, special attention was paid to the straightening mechanics and their interaction with the analysis electronics of the scanner system," explains Head of Sales Thomas Höpfl. Two individually controlled and driven straightening modules with a total of four bow and three skew rollers ensure that the correction of bow and skew distortions takes place in small steps. The control concept is also new. A scanner group at the infeed of the straightening machine detects distortions even before they reach the correction rollers. This way, the rollers are brought directly into position and the fabric is corrected from the very first centimetre. A scanner group at the outlet also detects possible residual distortion, which is corrected at the second straightening module. This enables an even more precise and faster response when it comes to reacting to rapidly changing distortions.

The Orthopac RXVMC therefore shows its full strength when straightening knitwear and distortion-sensitive fabrics. Knitted fabrics are special in terms of distortion dynamics. It is difficult for operators when changing the fabric rolls to join the relatively short fabric webs with weft and loop-straight seams. Before and after unavoidable insufficient seams, the distortion (e.g. right before to left before) changes abruptly. Conventionally, the distortion change is only detected by scanning at the output of the straightener.
 
The RXVMC concept enables a shortened reaction time to jumping distortion, (especially in the case of seams) due to the improved scanning concept with scanning at the outlet and inlet. This reduces knitted fabric outside the straightening tolerance up to 50 percent after each seam. Fewer fabric pieces have to be reprocessed. It guarantees higher quality goods and thus less waste.

Source:

Mahlo GmbH + Co. KG

Photo Mahlo GmbH + Co. KG
23.03.2023

Mahlo at the INDEX 2023: Nonwovens in focus

When the nonwoven industry meets at the leading trade fair INDEX in Geneva from 18 to 21 April, Mahlo GmbH + Co KG awaits trade visitors from all over the world to inform them about the right measurement technology enabling more efficient and high-quality production of nonwovens.

With a wide range of sensors, different measuring techniques and the corresponding measuring bridges, practically all tasks regarding the control of basis weight, moisture, thickness, fibre content, and air permeability can be solved in a cost-efficient and practical way.

When the nonwoven industry meets at the leading trade fair INDEX in Geneva from 18 to 21 April, Mahlo GmbH + Co KG awaits trade visitors from all over the world to inform them about the right measurement technology enabling more efficient and high-quality production of nonwovens.

With a wide range of sensors, different measuring techniques and the corresponding measuring bridges, practically all tasks regarding the control of basis weight, moisture, thickness, fibre content, and air permeability can be solved in a cost-efficient and practical way.

As an example, Wulbeck mentions spunlace products. They mainly consist of fibres such as cotton, PE, PET or rayon. They absorb light in the near-infrared range. Water and all other materials have different spectral ranges and can thus be distinguished. The near-infrared sensor Infrascope NIR determines the moisture content and the basis weight of different materials by attenuating the light in certain wavelengths. Due to its very high spectral resolution, the sensor can distinguish between components with very similar but not identical IR absorption and achieves high measurement accuracy. "Up to 0.05 g/m2 of the respective coating weight is possible," says Wulbeck.

"We want to support manufacturers in optimising their production processes and thus also the end product," says Matthias Wulbeck, Mahlo product manager for QCS. Because, like many other industries, the nonwoven sector is struggling with challenges such as rising prices for energy and raw materials, long delivery times and uncertain supply chains. In order to continue to produce economically and on time, it is therefore necessary to save resources and avoid faulty production as well as unnecessary process times. "Our Qualiscan QMS measurement and control system helps to do just that."

Source:

Mahlo GmbH + Co. KG

Foto Mahlo GmbH + Co. KG
19.01.2023

Mahlo: Datengesteuerte Produktion in Echtzeit

Extrem steigende Energiepreise und zunehmende Unsicherheit in fast allen Industriezweigen: Viele produzierende Textilunternehmen stehen heute vor großen Herausforderungen. Um auf dem Markt bestehen zu können, müssen sie die Flexibilität und die Effizienz ihrer Produktion erhöhen und Herstellungskosten durch Reduzierung des Ressourceneinsatzes minimieren. Die Online-Qualitätskontrolle in textilen Produktionsprozessen ist aktuell wichtiger denn je.

Mahlo will zeigen, wie eine datengesteuerte Produktion Probleme in der Textilbeschichtung und -veredelung lösen kann.

I4.0-konforme Qualitätskontrollsysteme von Mahlo, die in einer modernen Textilbeschichtungsanlage installiert sind, zeigen die Vielfalt der Möglichkeiten zur Produktionssteuerung. Um unterschiedlichen Anforderungen gerecht zu werden, hat Mahlo ein breites Portfolio an intelligenten Sensoren und Messrahmen im Qualiscan QMS-System, die online Produkt- und Prozessparameter wie Flächengewicht, Auftragsgewicht, Dicke, Feuchtegehalt, Bahntemperatur, Restfeuchte, Abluftfeuchte, Luftdurchlässigkeit etc. in den verschiedenen Phasen der Produktion erfassen.

Extrem steigende Energiepreise und zunehmende Unsicherheit in fast allen Industriezweigen: Viele produzierende Textilunternehmen stehen heute vor großen Herausforderungen. Um auf dem Markt bestehen zu können, müssen sie die Flexibilität und die Effizienz ihrer Produktion erhöhen und Herstellungskosten durch Reduzierung des Ressourceneinsatzes minimieren. Die Online-Qualitätskontrolle in textilen Produktionsprozessen ist aktuell wichtiger denn je.

Mahlo will zeigen, wie eine datengesteuerte Produktion Probleme in der Textilbeschichtung und -veredelung lösen kann.

I4.0-konforme Qualitätskontrollsysteme von Mahlo, die in einer modernen Textilbeschichtungsanlage installiert sind, zeigen die Vielfalt der Möglichkeiten zur Produktionssteuerung. Um unterschiedlichen Anforderungen gerecht zu werden, hat Mahlo ein breites Portfolio an intelligenten Sensoren und Messrahmen im Qualiscan QMS-System, die online Produkt- und Prozessparameter wie Flächengewicht, Auftragsgewicht, Dicke, Feuchtegehalt, Bahntemperatur, Restfeuchte, Abluftfeuchte, Luftdurchlässigkeit etc. in den verschiedenen Phasen der Produktion erfassen.

Die Messwerte werden direkt in den Echtzeitprozessoren der Sensoren verarbeitet. Die fertigen Messdaten werden intern in einem intuitiven Steuerungsdisplay visualisiert oder über Schnittstellen (OPC-UA, Modbus etc.) an ein externes Netzwerk übertragen. Die implementierten Regelungsalgorithmen interagieren direkt mit den entsprechenden Aktoren der Textilbeschichtungsanlage und reduzieren die Abweichung vom Sollwert. So entsteht ein gleichmäßigeres Endprodukt. Dies ermöglicht optimierte Sollwertvorgaben und führt neben einer besseren Produktqualität zu deutlichen Einsparungen bei Rohstoffen und Energiekosten. Zudem steigen Prozesssicherheit und Produktionsdurchsatz. Neben der Online-Kontrolle der oben genannten Parameter ist die Bereitstellung detaillierter historischer Daten eine wichtige Funktion jedes Qualitätskontrollsystems.

Durch einen vereinfachten und direkten Datenaustausch kann der Endanwender jederzeit nachvollziehen, wo und vor allem wie sein Produkt gefertigt wird. Damit sei nicht nur eine reibungslose Wertschöpfungskette gewährleistet, so Wulbeck. Der Endverbraucher kann auch sicher sein, dass sein Stoff immer mit den richtigen Parametern produziert wird. "Diese Sicherheit ist in diesen unsicheren Zeiten von hohem Wert."

Source:

Mahlo GmbH + Co. KG

08.08.2022

Mahlo at Febratex

Brazil hosts all industries needed for textile and garment production - from fiber to final production. This is why Mahlo, with its diverse solutions on straightening technology and process control, will exhibit at Febratex, held on August 23-26 in Blumenau.

"No matter what products they make, all producers have the same goals at the end of the day," says Area Sales Manager Miguel Lessel. "High-quality goods without distortion and optimized processes that combine quality and economy.

The automatic straightening system of the world market leader ensures thread-straight fabric in almost all applications. The modular system can be adapted to individual production conditions. To optimize the processes around the stenter frame, Mahlo offers various process control systems. These can be used, for example, to measure and control critical parameters such as dwell time, thread density or residual moisture. These systems not only help to improve the quality of the textiles, but also to save raw materials and reduce energy costs.

Brazil hosts all industries needed for textile and garment production - from fiber to final production. This is why Mahlo, with its diverse solutions on straightening technology and process control, will exhibit at Febratex, held on August 23-26 in Blumenau.

"No matter what products they make, all producers have the same goals at the end of the day," says Area Sales Manager Miguel Lessel. "High-quality goods without distortion and optimized processes that combine quality and economy.

The automatic straightening system of the world market leader ensures thread-straight fabric in almost all applications. The modular system can be adapted to individual production conditions. To optimize the processes around the stenter frame, Mahlo offers various process control systems. These can be used, for example, to measure and control critical parameters such as dwell time, thread density or residual moisture. These systems not only help to improve the quality of the textiles, but also to save raw materials and reduce energy costs.

Source:

Mahlo GmbH + Co. KG

Photo: Mahlo
26.07.2022

Mahlo at Indo Intertex 2022

  • Focus on straightening technology and process control

At Indo Intertex, held from 10 to 13 August in Jakarta, visitors get to see the Mahlo-way for process control in textile production. The German machine manufacturer and its partner agency Agansa Primatama will be available to show everyone its leading straightening technology as well as energy saving concepts around the stenter frames. INDO INTERTEX is South East Asia’s largest trade show on the textile and garment industries, bringing together leaders to experience world-class manufacture, technology and solutions.

Indonesia is one of the ten biggest textile producers in the world. Especially the USA, the European Union and Japan import a majority of their requirements from the Southeast Asian Island state. In order to fulfill the increasing demands and the call for high quality goods, producers invest in machinery, equipment and technology.

  • Focus on straightening technology and process control

At Indo Intertex, held from 10 to 13 August in Jakarta, visitors get to see the Mahlo-way for process control in textile production. The German machine manufacturer and its partner agency Agansa Primatama will be available to show everyone its leading straightening technology as well as energy saving concepts around the stenter frames. INDO INTERTEX is South East Asia’s largest trade show on the textile and garment industries, bringing together leaders to experience world-class manufacture, technology and solutions.

Indonesia is one of the ten biggest textile producers in the world. Especially the USA, the European Union and Japan import a majority of their requirements from the Southeast Asian Island state. In order to fulfill the increasing demands and the call for high quality goods, producers invest in machinery, equipment and technology.

At IndoIntertex, Mahlo informs about its straightening machine Orthopac RVMC-15, among other. Based on experience reaching back to over 75 years, the machine offers the latest technology for correcting distortions. The modular straightening and process control system ensures a straight-thread product before and after the drying or fixing process and optimises the processes all around the stenter. This increases quality and saves resources and energy. The process control system Optipac VMC-15 measures and controls critical parameters such as dwell time, thread density or residual moisture.

Source:

Mahlo GmbH + Co. KG

Process control with Qualiscan QMS (c) Mahlo. Process control with Qualiscan QMS.
17.05.2022

Mahlo at Techtextil 2022

At Techtextil from 21-24 June in Frankfurt, Mahlo will be demonstrating how manufacturers of technical textiles can optimise their production even further using measuring and control technology.

Special straightening technology for technical textiles
Mahlo's range also includes solutions for straightening distorted goods. Best suited for technical textiles are, for example, the symbol of the straightening machine, the Orthopac RVMC-15 and the reinforced version Orthopac GRVMC-15. Frame, bearings, and rollers are designed for high loads and allow large working widths of up to 5,400 mm. As the latest development from Mahlo, the experts present the Orthopac CRVMC-15 automatic straightener, which is particularly interesting for the glass & carbon fabric industry and some special applications.

At Techtextil from 21-24 June in Frankfurt, Mahlo will be demonstrating how manufacturers of technical textiles can optimise their production even further using measuring and control technology.

Special straightening technology for technical textiles
Mahlo's range also includes solutions for straightening distorted goods. Best suited for technical textiles are, for example, the symbol of the straightening machine, the Orthopac RVMC-15 and the reinforced version Orthopac GRVMC-15. Frame, bearings, and rollers are designed for high loads and allow large working widths of up to 5,400 mm. As the latest development from Mahlo, the experts present the Orthopac CRVMC-15 automatic straightener, which is particularly interesting for the glass & carbon fabric industry and some special applications.

The Mahlo team will present the wide portfolio of intelligent scanners and sensors that record product and process parameters, such as distortion, fabric temperature, dwell time, basis weight, coating weight, thickness, moisture content, residual moisture, exhaust moisture, air permeability, etc. online. Among other things, visitors can expect to see the Famacont PMC-15 weft density measurement system in live operation. The system measures the weft or course density on the running web and compares it with the target value stored in the recipe data management system. The detected deviation from the target value is used to fully automatically control the overfeed during the needling process at the stenter frame and to ensure a constant weft/course density over the full width of the product.

Source:

Mahlo GmbH + Co. KG

(c) Mahlo GmbH + Co. KG
04.05.2022

Altun Tekstil acquires weft straighteners from Mahlo

Turkish company Altun Tekstil, a manufacturer of home textiles and upholstery fabrics, has ordered a total of five of the latest Orthopac RVMC-15 weft straighteners from Mahlo.

The production of textured yarns, weaving and raschel knitting as well as dyeing and finishing is included in Altun’s operations. While the focus is on tulle curtains and upholstery, the company’s fabric range also encompasses a wide variety for apparel.

When investing in the future, Altun Tekstil has consistently trusted in Mahlo and has installed 10 Mahlo Orthopac RVMC-15 weft straighteners in its two plants since 2016.

Lowest residual distortion at highest speed
All the Mahlo weft straighteners Orthopac RVMC-15 are integrated into existing production lines. Mahlo’s latest weft straightener is fit to interact and communicate via the newly mSmart concept with all production lines and provide historical data, which help to improve the production processes.

Turkish company Altun Tekstil, a manufacturer of home textiles and upholstery fabrics, has ordered a total of five of the latest Orthopac RVMC-15 weft straighteners from Mahlo.

The production of textured yarns, weaving and raschel knitting as well as dyeing and finishing is included in Altun’s operations. While the focus is on tulle curtains and upholstery, the company’s fabric range also encompasses a wide variety for apparel.

When investing in the future, Altun Tekstil has consistently trusted in Mahlo and has installed 10 Mahlo Orthopac RVMC-15 weft straighteners in its two plants since 2016.

Lowest residual distortion at highest speed
All the Mahlo weft straighteners Orthopac RVMC-15 are integrated into existing production lines. Mahlo’s latest weft straightener is fit to interact and communicate via the newly mSmart concept with all production lines and provide historical data, which help to improve the production processes.

The fully integrated units benefit from universal control technology and the intuitive Mahlo mSmart G15 visualization concept. The HMI has been optimized for userfriendliness. The visualisation concept is constantly enhanced and ready for Industry 4.0. The path to a digital future within Altun is prepared.

Source:

Mahlo GmbH + Co. KG

02.11.2021

Penn Textile Solutions setzt auf Prozesskontrolle von Mahlo

Penn Textile Solutions GmbH is one of the world's leading manufacturers of elastic fabrics for under-wear, corsetry, sportswear and swimwear, as well as highly functional textiles for technical applications. The fully integrated company with its own warping, circular knitting, warp knitting, dyeing and finishing facilities currently employs around 150 people.

Penn Textile Solutions GmbH is one of the world's leading manufacturers of elastic fabrics for under-wear, corsetry, sportswear and swimwear, as well as highly functional textiles for technical applications. The fully integrated company with its own warping, circular knitting, warp knitting, dyeing and finishing facilities currently employs around 150 people.

Penn has long relied on Mahlo
Penn has relied on the cooperation with Mahlo for years. The manufacturer of measuring, control and automation systems for web-shaped goods has decades of experience in the field of process control. Until the summer of 2020, the textile manufacturer had been using a basis weight measurement system in the stenter frame outlet with beta radiation and manual control. "When the krypton preparations had passed their half-life, we had to make a decision: Exchange or replace the system right away", says operations manager Franz Schütte. They sat down with Mahlo representatives and looked for the best solution. Since the systems had already reached a high operating age and the measurement was limited to the basis weight, a new concept was decided upon. "Mahlo made us the best price-performance offer." The new system should be even more efficient and easier to operate for the special makes..

The compression zones of the functional fabric create corresponding distortions within the textile surface in its raw state, which have to be smoothed out in the fixing process. This work is now taken over by a process control system. The Mahlo Famacont PMC-15 with two measuring points automatically controls the leading of the stenter frame by continuously and contactlessly determining the mesh density. In addition, the Patcontrol PCS-20 process control system ensures that the dimensions of the different zones are recorded and also automatically controlled. "The previous beta-radiation facility was not able to collect this kind of data," explains the Penn operations manager. Another important aspect for the textile manufacturer: the complete and costly radiation protection is no longer necessary with the new systems.

Despite very good experience with Mahlo in the past, every change naturally involves a risk. Penn did not have to rely on theoretical considerations, however, but carried out tests in advance with appropriate sample material in the Mahlo test laboratory. The results convinced the decision-makers.

Source:

Mahlo GmbH + Co. KG