From the Sector

The 14th in-store asia will be held in Mumbai from 1 June to 3 June 2023. The trade exhibition for retail resources and investment in store design, VM and in-store marketing gathers decision-makers from more than 7,500 retail companies, consultants, service providers, and manufacturers, bringing together over 100 exhibitors.

Since 2018, in-store asia has been a member of the international trade fair family of EuroShop in Düsseldorf. It assembles all leading retail solutions providers from India and other countries under one roof. Here decision-makers from retail, including branded product producers, retail consultants as well as providers of services and solutions for retail, store designers, architects and VM experts come together.

The 3-day event includes not only the Expo area but also a wide range of side events comprising a Convention with over 30 speakers, the presentation of the coveted VM & RD Retail Design Awards as well as the VM Challenge, a live shop window challenge for top-notch visual merchandisers that is unique for India. Furthermore, the Retail Technology Pavilion will present new tools, for instance for retail management and customer tracking as well as solutions revolving around AI & virtual reality, NFTs, smart checkout all the way down to store management, retail security and payment. Celebrating a premiere here will be the Start-up Hub, which will provide emerging, innovative companies with a stage to present themselves to the industry.

The Indian retail industry has changed drastically; being one of the fastest growing retail markets it has proven a key driver for the Indian economy. The Indian retail sector is forecast to continue posting enormous growth rates due to such factors as growing urbanisation, rising household incomes, better connected rural consumers and rising consumer spending.

As a trade fair for safety and occupational health in China, the 104th China International Occupational Safety & Health Goods Expo (CIOSH 2023), organized by China Textile Commerce Association (CTCA) and Messe Düsseldorf (Shanghai) Co., Ltd. (MDS), will be grandly held at the Shanghai New International Expo Centre (SNIEC) Hall E1-E7 from 13-15 April 2023. Following three years of epidemic prevention and control measures, the situation has stabilized in China, allowing the labor protection market to enter a phase of rapid recovery and rebound. CIOSH 2023 will attract over 1,500 exhibitors from 14 countries, showcasing their latest protective equipment and technology in an exhibition area exceeding 80,000 square meters.

Integrating Online and Offline Platforms
CIOSH 2023 encompasses four major sectors: Safety at Work, Security at Work, Health at Work, and Emergency Rescue Management. Renowned domestic and international exhibitors, including 3M, Honeywell, Ansell, SATA, JSP, MSA, DELTAPLUS, Lakeland, Cortina, UVEX, CM Chaomei, Xing Yu Gloves, DS, East Asia Glove, Hanvo, SOMO Zhongmai Safety, SAFETY-INXS, and TELPS, will assemble on site. At the same time, CIOSH 2023 has introduced an innovative online platform - CIOSH VIRTUAL. By offering online displays, live streaming, interactive features, and real-time communications, it breaks time and space constraints, facilitating exhibitors and visitors to continue their business exchanges and cooperations beyond the physical exhibition. So far, nearly 1,300 companies have joined the CIOSH VIRTUAL, showcasing more than 3,000 products online and attracting over 70,000 views.

CIOSH Industry Technical Seminar, Sustainable Development Emerges as the Key Focus
The annual Industry Technical Seminar, held concurrently with CIOSH, serves as a platform for professionals to discuss product solutions, share industry insights, and exchange ideas on relevant policies. In 2021, China integrated climate change mitigation measures into its 14th Five-Year Plan, established a 2030 carbon peaking action plan, and proactively pursued the goal of carbon neutrality by 2060. Under the development objectives of "carbon peaking" and "carbon neutrality," the sustainable development of the personal protective equipment (PPE) industry has become the primary theme of this year's seminar. Experts from China Carbon Low-carbon Certification (Jiangsu) Co., Ltd., China Certification Centre, Inc., and SGS-CSTC Standards Technical Services Co., Ltd., will examine related policies, the effects of "carbon neutrality" on the PPE industry chain and the industries using PPE from different angles. They will also explore the future direction of PPE and offer professional guidance for the transformation of relevant enterprises.

Fall Protection Zone
Falls from height are one of the most common accidents that cause serious injury or death to workers. Effective fall protection requires not only protective equipment, but also professional instructions and training. Therefore, CIOSH set up a new Fall Protection Zone in 2021, which received unanimous acclaim. CIOSH 2023 has continued to invite SKYLOTEC, rothoblaas, JECH, Mode and NTR Safety, five companies that specialize in protection at height, to conduct on-site demonstrations on fall testing, fall protection solutions and aerial rescue, and provide visitors with the most professional fall protection guidance and training.

Occupational Health
CIOSH has always implemented the strategy of expanding the business scope in a diversified way, which devotes itself to providing innovative opportunities and new driving forces for the sustainability of the occupational safety and health industry. This year, focusing on the "occupational health" sector, the exhibition will launch an Ergonomics Zone and an Exoskeleton Technology Zone for the first time.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Hong Kong subsidiary SHIMA SEIKI (HONG KONG) LTD., will participate in the 40th Session of SPINEXPO in Shanghai, China from 12th - 14th April 2023.

At SPINEXPO, SHIMA SEIKI will offer visitors a choice between its "SDS®-ONE APEX4" apparel design system and its "APEXFiz®" subscription-based design software. Whereas SDS®-ONE APEX4 is offered as an all-in-one proprietary hardware + software package, APEXFiz® is subscription-based design software that can be installed on customers' individual computers. Both SDS®-ONE APEX4 and APEXFiz® software support the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. When a design is approved for production, knitting data is automatically generated for converting to machine data, allowing smooth communication for digitally bridging the gap between studio and factory. APEXFiz® thereby helps to realize sustainability while digitally transforming the fashion supply chain.

Also on display at SPINEXPO will be SHIMA SEIKI's "yarnbank®," an online web service for searching and viewing the latest yarns, developed with cooperation from yarn companies from around the world. Registered users can download yarn data for free, for use in fabric simulation and virtual sampling on APEXFiz®, avoiding the need to scan yarn on their own. By using yarn that is used in actual production, designers and apparel companies can furthermore rest assured that the simulations created using yarn from yarnbank® are not merely realistic images but accurate representations using yarn that can actually be purchased and used in production. With yarnbank®, the entire supply chain from yarn companies and apparel companies to knit manufacturers can be connected digitally.

SHIMA SEIKI will also display the latest collection of its knit samples, including WHOLEGARMENT® knitwear that is knit in its entirety on the machine without the need for linking or sewing afterward. Together with virtual sampling performed on APEXFiz®, WHOLEGARMENT® offers smart production for realizing a sustainable fashion supply chain.

Paper Converting Machine Company (PCMC)—which specializes in the design and manufacture of high-performance converting machinery for the tissue, nonwovens, package-printing and bag-converting industries worldwide—announced that Windell McGill has joined the organization as the Product Launch Manager for its print business segment.

Bringing more than 25 years of print industry experience to PCMC, McGill will oversee product management, product launch and brand expansion for all PCMC print products and services.

Prior to joining PCMC, McGill was Managing Partner of ePac Atlanta, a provider of custom, high-quality flexible packaging solutions and digital printing services. Before that, he served as Business Segment Manager for flexible packaging at HP Indigo. McGill’s extensive experience also includes more than 15 years with Advanced Vision Technology, a provider of camera-based inspection equipment for the packaging market, where he held a variety of sales roles before being named President-Americas.

McGill will operate from his office in Atlanta.

• TreeToTextile sustainable textile fibre demo plant in Sweden

TreeToTextile, owned by H&M Group, Inter IKEA Group, Stora Enso, and LSCS Invest, invested €35 million in constructing a textile fiber process technology demonstration plant in Sweden. AFRY supported TreeToTextile throughout the project in the development and implementation phases from 2016-2022. The demonstration plant is now in the start-up phase.

TreeToTextile is offering a new technology to produce bio-based textile fibers with a low environmental footprint and aims to make sustainable textile fibers available to all. The new fiber is a regenerated cellulosic fiber, produced from renewable and sustainably sourced raw materials from forests. TreeToTextile has invested €35 million in developing and constructing a new demonstration plant in Nymölla, Sweden. This investment is a crucial step prior to the scale-up and commercialization of this technology.

AFRY has been the leading consultant and engineering partner of TreeToTextile from its early stages of project development in 2016, continuing onto demo plant implementation engineering from 2020-2022 In the project development phase, AFRY’s assignment included several pre-feasibility and feasibility studies, process design, up-scaling evaluations, and supplier pilot runs planning. In the demo plant implementation phase, AFRY was responsible for the engineering, project management and site services, also providing many additional services like permit and procurement support as well as machine and IT solutions.

“AFRY and TreeToTextile have a long-lasting, mutually developing relationship that we hope to continue. Together with AFRY, we have overcome the challenges through close collaboration, flexibility, broad competence and most important of all, mutual commitment”, says Olli Ylä-Jarkko, CTO at TreeToTextile.

The commissioning of the demonstration plant started in the summer of 2022, and the project was handed over to TreeToTextile for start-up and further optimization of the process.

“I’m proud of the deep and long-lasting cooperation with TreeToTextile. This project shows AFRY’s ability and wide competence to meet various demands of customer investment projects – from early phase development to implementation. AFRY’s long experience with bio-based materials, combined with our extensive process industry and project execution experience, makes us a unique partner for industrial clients in accelerating their bio-based fibers to scalable commercial production”, says Lisa Vedin, Head of Process Industries Sweden at AFRY.

The Supervisory Board of adidas AG has extended the appointment of Harm Ohlmeyer as Chief Financial Officer of the company by another three years until the beginning of 2028. Harm Ohlmeyer has been member of the Executive Board of adidas AG since March 2017 and the company’s CFO since May 2017.

At the same time, the Supervisory Board appointed Arthur Hoeld as Executive Board member, responsible for Global Sales, as of April 1, 2023. Hoeld has been with adidas for 25 years, most recently as Managing Director of the company’s EMEA region since 2018. He will succeed Roland Auschel, who has decided to step down from his role, pass on the baton and leave the company after 33 years with adidas, including ten years as an Executive Board member.    

Furthermore, Brian Grevy, Executive Board member of adidas AG, responsible for Global Brands, has informed adidas AG’s Supervisory Board that he will step down from the Executive Board and leave the company. In mutual agreement with Brian Grevy, the Supervisory Board approved the termination of his appointment as an Executive Board member as of March 31, 2023. adidas CEO Bjørn Gulden will assume responsibility for Global Brands. In this role, Gulden will lead adidas product and marketing activities, which will enable the required fast decision-making across all business units and departments.

Thomas Rabe thanked Brian Grevy for his many important contributions during his years of service with the company. Grevy initially joined adidas in 1998 and held leadership positions of increasing responsibility for adidas on a local, regional and global level before leaving the company in 2016. At the beginning of 2020, Brian Grevy returned to adidas as the company’s Executive Board member for Global Brands.

As of April 1, 2023, the company’s new Executive Board will consist of Bjørn Gulden (Chief Executive Officer and Global Brands), Arthur Hoeld (Global Sales), Harm Ohlmeyer (Chief Financial Officer), Amanda Rajkumar (Global Human Resources, People and Culture) and Martin Shankland (Global Operations).

• Standard assesses fibre release, biodegradation and ecotoxicity for the first time

Testing service provider Hohenstein has worked with the project partners Trigema, Freudenberg, DBL ITEX and Paradies to create a new standardized test method for detecting and classifying the environmental effects of textiles during washing. DIN SPEC 4872 combines analysis of fibre release, biodegradability and ecotoxicity. The test method according to DIN SPEC 4872 shows how many fibres are released during textile laundering, how well these fibres degrade in wastewater and how harmful the fibre residues are to the environment.

Studies have shown that washing textiles releases microfibres into the wash water, which cannot be sufficiently retained by wastewater treatment plants. Synthetic fibres pose the greatest risk to the environment because of their longevity and inability to biodegrade. However, Hohenstein project manager Juliane Alberts does not give the all-clear for biodegradable fibres and natural fibres: "Biodegradability alone does not mean that pure natural fibres, for example, are completely harmless to the environment. They, too, remain in ecosystems until they completely degrade and can also have a negative impact. In addition, additives, auxiliaries or finishes used in textile production can further slow the degradation process and leach into the environment."

The new standard enables textile producers and suppliers to test, evaluate and compare products for fibre release during washing and environmental impact. Juliane Alberts sees this systematic evaluation as an opportunity for the textile industry to take the initiative on environmental impact: "Our reliable data can be used as a basis for more targeted product development. This is a way to actively and consciously control further environmental pollution."

NatureWorks, the manufacturer of low-carbon polylactic acid (PLA) biopolymers made from renewable resources, hosted a cornerstone laying ceremony to celebrate construction of their new Ingeo™️ PLA manufacturing complex in Thailand. The ceremony which took place on February 1st, 2023 commemorated the progress made to date on the new fully integrated biopolymer facility. The day also featured a ceremonial groundbreaking that mirrored the ceremony held in Blair, Nebraska, USA in 2000 when NatureWorks began construction on the world’s first commercial scale PLA manufacturing facility.

The new manufacturing facility located on the Nakhon Sawan Biocomplex (NBC) in Nakhon Sawan Province, Thailand is designed to be fully integrated including production sites for lactic acid, lactide, and polymer. With completion expected in the second half of 2024, the manufacturing site will have an annual capacity of 75,000 tons and will produce the full portfolio of Ingeo biopolymer grades.

The expanded global production of Ingeo biopolymer will support growth in markets including 3D printing and hygiene as well as compostable coffee capsules, tea bags, flexible packaging, and food serviceware that demand sustainable, low-carbon biomaterials and require the high-performance attributes that Ingeo is uniquely suited to deliver.

“This ceremony is a meaningful milestone for the entire NatureWorks team,” said Rich Altice, president and CEO of NatureWorks. “For the last three decades, we have not only been building a company and manufacturing facilities, but also a whole new industry and market for low-carbon, renewable biomaterials that are revolutionizing the sustainability and safety of packaging and product materials used in our everyday lives.”

The Science Based Targets initiative (SBTi) has approved Autoneum’s science-based emissions reduction targets. The validation by the SBTi is an important milestone in Autoneum’s efforts to reduce its direct and indirect greenhouse gas (GHG) emissions along the entire value chain.

Recognizing the serious environmental challenges facing the world today and the resulting need for rapid and significant reductions in global CO₂ emissions, Autoneum has committed to reducing its absolute scope 1 and 2 GHG emissions by 20% by 2027 from a 2019 base year. The Company also commits to reduce its absolute scope 3 GHG emissions from purchased goods and services by 20% within the same timeframe. Autoneum’s GHG emission reduction targets were validated by the SBTi on January 12, 2023, and are in line with the goals of the Paris Agreement to limit global warming to well below 2°C. The Company is thus taking another important step toward a sustainable future of mobility.

An overview of all emissions reduction targets and activities implemented by Autoneum in 2022 will be published in the Company’s Corporate Responsibility Report 2022 on March 24, 2023.

From April 2023, OEKO-TEX® will officially launch its new ORGANIC COTTON label. Two initial pilot customers have already been certified by the testing service provider Hohenstein: the Indian textile supplier Milan Group and the Turkish cotton producer Akasya.

The new organic label ensures that all requirements for labeling as organic cotton are met. In addition to testing in accordance with OEKO-TEX® STANDARD 100, it ensures that the cotton contains less than ten percent genetically modified material, complies with pesticide limits and guarantees its organic origin.

Textile companies whose products have been certified with the OEKO-TEX® STANDARD 100 can now have their certificates extended to an ORGANIC COTTON certificate after ensuring ecological production.

"A combination with OEKO-TEX® MADE IN GREEN is ideal," explains Ivonne Schramm, Head of OEKO-TEX® at Hohenstein. "This ensures environmental friendliness, transparency and socially responsible conditions in a single certification."

The certificate can be used for ready-made articles (e.g. T-shirt, bedspread, etc.) as well as for textile intermediate products (e.g. intermediate products such as raw fibers, yarns, etc.). Mixtures of organic and conventional cultivation are not permitted.