From the Sector

Mehler Texnologies, a leading specialist in coated technical textiles, plans to close down the Fulda plant adapting to market changes.

For several years, Mehler Texnologies had to face by a persistently sluggish market environment. In view of considerable overcapacities within its own production network, the company therefore plans to close its Fulda plant in the course of 2025. On the basis of the current situation, 192 employees will be affected by the decision.

Mehler Texnologies has already notified the responsible employee representative bodies of its plans and socially compatible solutions are being developed in joint discussions. The specific date of the plant closure depends on the outcome of these discussions.

Dibella is again increasing the use of Cotton made in Africa cotton according to the mass balance system. In 2025, the company will purchase 825 tons of raw fibres. This corresponds to an increase of 10% compared to the previous year.

Dibella has been implementing Cotton made in Africa (CmiA) cotton in its supply chain in accordance with the mass balance system since 2017, thereby supporting socially and ecologically sustainable cotton production in Africa. With this further increase, Dibella is fulfilling its corporate goal of “increasing the use of sustainable fibers”.

The mass balance system allows the raw cotton to be easily implemented in the production process at Dibella's suppliers, while at the same time having a high impact on African cotton farmers. The license costs incurred are borne by Dibella and are not passed on to customers. In this way, Dibella aims to raise awareness for more sustainable raw fiber production, away from cost discussions.

Cotton made in Africa cotton causes up to 13% less greenhouse gas emissions compared to the global average. No artificial irrigation is used during cultivation. This not only saves drinking water, but also protects valuable water resources in regions that are often affected by water shortages. Not using genetically modified seeds protects natural biodiversity. This specific example shows just how much the cotton farmers benefit: In Côte d'Ivoire, the income of farming families from the sale of CmiA cotton increased by almost 18 percent between 2015 and 2020, according to an independent study* commissioned to assess CmiA's activities and their impact.

Pili, a French pioneer in biobased dyes and pigments, partners with Orta, the Turkish denim mill and Citizens of Humanity, a California-based high-end denim brand known for its commitment to quality and sustainability.

They are beginning a transformative shift in the denim industry with the commercial launch of the first products dyed with Pili’s biobased indigo. The first products will debut in January in the Spring 2025 collections of Citizens of Humanity and AGOLDE.

A New Ecological Standard for the Denim Industry
In 2024, Pili achieved a major milestone by producing its first tons of biobased indigo, enabling the creation of sustainable denim articles, a turning point in the company's efforts to decarbonize the textile industry especially denim.

Pili has developed unique processes combining fermentation and organic chemistry to offer a high-performance, eco-friendly alternative to petrochemical dyes. Their ecological alternative significantly reduces the use of toxic chemicals and fossil resources, while aiming to cut CO2 emissions up to 50%. It meets the same performance as petrochemical indigo while seamlessly integrating into existing dyeing processes without requiring additional investment in commercial dyeing equipment.

Pili’s colors development is based on standardized Life Cycle Assessments (LCAs), ensuring a rigorous process to measure and minimize their environmental impact.

A Partnership Driving Sustainable Transformation in the Industry
Fiber and dye are the two main components of denim products and also the ones with the greatest impact on their production. The partnership between Citizens of Humanity, Pili, and Orta establishes one of the highest ecological standards in the market with the use of regenerative cotton and biobased indigo.

Pili biobased indigo will make its debut in Citizens of Humanity and AGOLDE’s Spring 2025 collections. This long-term partnership between Citizens of Humanity, Orta, and Pili will continue to expand in future collections. The launch will be exclusive on NET-A-PORTER on January 6, 2025, before being extended to agolde.com, citizensofhumanity.com, and other global retailers.

A Key Step Towards the Decarbonization of the Color Industry
Building on this first success, Pili is accelerating the development of coloring solutions for various industrial applications, particularly in the inks, paints, and polymers sectors. The aim is to decarbonize everyday products using high-performance biobased pigments, with the first applicative tests set to begin this year. Pili continues its mission to decarbonize the color industry, paving the way for a sustainable revolution.

The International Textile Manufacturer Federation has published its International Textile Industry Statistics (ITIS) on productive capacity and raw materials consumption in the short-staple organized (spinning mill-) sector in virtually all textile-producing countries in the world. ITMF has used a new calculation method and reviewed past time series.

The estimated global number of installed short-staple spindles reached 232 Mio units in 2023 and the number of installed open-end rotors grew to 9.7 Mio (see Fig. 1 and 2). Capacity building is still disproportionally targeting Asia. The number of installed air-jet spindles soared to 637 thousand. Outside Asia, the main capacity increase was registered in Türkiye.

Global Installed Capacities and Raw Material Consumption in the Short-Staple Organized (Spinning Mill-) Sector of the Textile Industries (1993-2023) The number of installed shuttle-less looms increased to 1.7 Mio in 2023 (see Fig. 3). Total raw material consumption in the short-staple organized sector slightly decreased to 43 Mio tons (see Fig. 4). Global consumption of raw cotton and cellulosic short-staple fibers decreased by -4.4% and -2.9%, respectively. Consumption of synthetic short-staple fibers increased by 0.5%.

Autoneum expands its sustainable product portfolio for commercial vehicles with new polyester-based side and rear wall panels. Their carrier material consists of Propylat PET, the company’s eco-friendly and fully recyclable Pure technology made of 100 percent polyester. Autoneum’s components thus offer a significantly more sustainable alternative to the composite or thermoset resin panels commonly used in trucks today, which are difficult to recycle. Thanks to the unique material composition of Propylat PET, they contribute to optimized acoustic and thermal management.

With the establishment of a dedicated Business Unit Commercial Vehicles at the beginning of 2024, Autoneum has set the course for further sustainable and profitable growth in this market segment on a global scale. Manufacturers of medium and heavy trucks as well as agricultural vehicles thus benefit not only from Autoneum’s existing production footprint and comprehensive product and technology portfolio, but also from the Company’s longstanding experience in the development and manufacturing of environmentally friendly monomaterials. Components such as the new polyester-based side and rear wall panels support customers in improving the environmental performance of commercial vehicles and are therefore an important step towards a circular economy also in this vehicle segment.

The carrier material of Autoneum’s sustainable trim components consists of 100 percent polyester. Thanks to the high content of recycled fibers and the excellent end-of-life recyclability of Propylat PET, the side and rear wall panels from Autoneum are considerably more environmentally friendly than the composite or thermoset resin alternatives commonly used in trucks today. Furthermore, additional components can be welded onto the material without the use of adhesives or other chemicals, which further increases the products’ recyclability at the end of their service life. Due to the unique material composition of Propylat PET, the components also improve the acoustic and thermal insulation of the vehicle interior and are characterized by minimal emission of volatile organic compounds as well as low odor. In addition, Autoneum continues to invest in the develop-ment of monomaterial components for commercial vehicles, where both the carrier material and the aesthetic surface are made entirely of polyester, thus further advancing the transition to a sustaina-ble circular economy.

Polartec®, a Milliken™ & Company brand and creator of innovative textile solutions for future thinking, introduces Product, the third and final chapter in Polartec’s multifaceted Beyond Begins Today mini-series.

Beyond Begins Today looks at how Polartec fabrics are made to last, and to be used and enjoyed from one generation to the next and beyond. It explores the innovative monomaterials, repurposed plastic and the plant-based nylon membranes that Polartec uses to set new standards for high performance fabrics; the ambitious climate-related objectives across the entire value chain that exceed existing mandates. Such a holistic strategy allows Polartec to stay at the forefront of its industry by producing top-notch textiles that champion environmental stewardship and pave the way for a more sustainable tomorrow.

Within the rich tapestry of Polartec’s legacy, threads of innovation weave together the past, present, and future. From its humble origins as pioneers of synthetic fleece to bold strides into new realms, Polartec represents the promise of harmony between creation and care; touching lives while honoring the earth.

Product, the final installment of Beyond Begins Today, features Paul Cosgrove (Chief Product Officer, Mammut), Sachiye Koide, (Mountaineer & Product Engineer), and Eric Yung (Managing Director of Polartec). Through a discussion that begins with a reverent nod to the iconic designs of brands like Mammut and the pioneers who wore them, Chapter 3 leads into the soul of the great outdoors. From a celebration of the gear that binds lives to landscapes, and passions to purpose, it looks at a legacy that connects Polartec’s promise to enhance lives to the enduring strength of its textile solutions.