From the Sector

To receive an award at PERFORMANCE DAYS is the ultimate industry recognition. In selecting the winners of the (ECO) PERFORMANCE AWARDS, the jury handles with total integrity with no outside influence and is absolutely free in making its decisions. This season there are so many outstanding innovations at the exhibition that two awards are announced!

WATER – OUR RESPONSIBILITY, the current FOCUS TOPIC for the next trade fair on November 28-29th, seems to have spurred the PERFORMANCE DAYS exhibitors to peak performances. The trade fair has highlighted innovations every season for the past ten years, but seldom have there been so many outstanding new developments. So many in fact, that two awards are to be presented: the ECO PERFORMANCE AWARD for best sustainable development, and the PERFORMANCE AWARD for a new functional highlight.  

And the winner of the ECO PERFORMANCE AWARD is:
The jury is highly enthusiastic about the nomination of the ECO PERFORMANCE AWARD winner and described the award-winning fabric as the best ecological solution currently available on the market. This extraordinary laminate from Jou Jou Fish combines various sustainable technologies. Article "JYRNP0002 307" consists of 100% recycled nylon and is designed with a micro-porous membrane (functional performance 15K/10K) that is produced without solvents. This saves a lot of water, plus the fabric is made from pre-dyed fibres (solution-dyeing) and the DWR coating is applied using a dry-finish treatment. The only thing that could improve it: as the polyamide is currently produced from postindustrial waste products, it would be nice to have option of using post-consumer polyamides in the future.

And the winner of the PERFORMANCE AWARD is:
The PERFORMANCE AWARD recognizes another pioneering development. Never before has there been such a fine, yet still tear resistant, highly functional fabric. The winner is article "DPQ 1092 DWR" from Green Threads and with only 17g/m² an absolute lightweight. Particularly fine nylon yarns are used (7d and 4d); a 4d yarn has never before been used in functional fabrics. This plus the extremely good tear resistance clinched it for the jury. Another plus for the winner: this lightweight fabric can achieve with just 17 g comparable performance values to a 50g fabric; thereby, not only is the weight significantly reduced, but also the amount of raw materials and energy consumed in production. This is also a factor that protects the environment when the garment is disposed at the end of its useful life.

The fourth edition of the ICNF - International Conference on Natural Fibers – Smart Sustainable Solutions will be taking place from 1-3 July 2019 in Porto, Portugal, is accepting extended abstracts of two full pages until 31st January 2019.
The Conference, focused on the latest scientific and technical advances in natural fibers will bring together more than 300 participants from universities, research and technological centers and companies.

Program topics
Following up the success of ICNF2017 held in Braga, Portugal, focusing on the topic ‘Advanced Materials for a Greener World’, next year’s ICNF is devoted to the topic ‘Smart Sustainable Solutions’.
The conference topics include:

•    New processes for natural fiber agriculture extraction and processing;
•    Natural fiber reinforced biopolymers;
•    Innovative natural fibers & structures;
•    Functional natural fibers;
•    Natural fiber modification techniques;
•    Advanced fibrous structures based on natural fibers;
•    Nanodimensional natural fibers;
•    Natural fiber based polymeric composites;
•    Green composites;
•    Natural fiber based cementitious composites;
•    Applications of natural fibers in high end sectors;
•    Analytics, modeling and prediction of properties and behavior;
•    Biomimetics;
•    Product development based on natural fibers;
•    Markets for natural fibers;
•    Sustainability of natural fibers: life cycle assessment studies;
•    Textile processing of natural fibers;
•    Properties & characterization of natural fibers & structures.

Natural Fibrenamics Award 2019
After the success of last editions, the Natural Fibrenamics Award is again included in the ICNF2019 program to award the best innovative products in the field of natural fibers. The innovative product applications will be shown during the Conference in a special showroom and evaluated by a selected jury in terms of innovation, design and functionality. The contest intends to be a showcase of the latest innovations in the field of natural fibers, both for the scientific and industrial communities.

The online abstract submission is open until January 31, 2019 at the official ICNF2019 website: www.icnf2019.fibrenamics.com

• Huntsman Textile effects redefines dyeing of polyester including microfiber and blends with UNIVADINE® E3-3D diffusion accelerant
• Eco-friendly diffusion accelerant provides reproducible, high-speed polyester dyeing

Singapore – Huntsman Textile Effects introduces UNIVADINE® E3-3D next-generation diffusion accelerant to help mills achieve high-performance dyeing of polyester, microfibers and blends in an environment-friendly way that complies with current and anticipated industry sustainability standards.

The demand for polyester and man-made fibers is booming as sports and athleisure apparel markets expand rapidly around the world. At the same time, big-name brands that set trends in the sector continue to increase focus on sustainability and performance. As such, this is putting pressure on mills since the current industry standard involves chemically active diffusion accelerants that contain unwanted chemicals and require additional leveling agents and anti-foaming products that may be hazardous to people and the environment.

Developed by Huntsman Textile Effects specifically to meet these challenges, UNIVADINE® E3-3D diffusion accelerant is low-odor, free of benzyl benzoate and other hazardous substances. Part of Huntsman’s range of innovative dyEvolution™ dyeing auxiliaries, it uses Huntsman’s Active Diffusion Technology to enable high-speed dyeing with best-in-class leveling, retarding and migration properties.

“UNIVADINE® E3-3D diffusion accelerant delivers across three key dimensions – diffusion, leveling and migration – for exceptional performance and environmental and economic sustainability. Its environmental credentials offer mills greater processing flexibility and an optimum price-performance ratio,” said Kerim Oner, Global Marketing Manager for Dyeing Auxiliaries at Huntsman Textile Effects. “We expect this latest offering to change the way that the industry dyes polyester and blends while meeting stringent environmental standards.”

UNIVADINE® E3-3D diffusion accelerant has a high affinity to polyester, causing the fiber to swell and increasing the diffusion of the disperse dye, even at lower temperatures. Multiple leveling mechanisms then slow down the exhaustion rate to ensure safe, defect-free dyeing. Finally, as the dye bath heats up, the product’s strong support for disperse dye migration ensures the dye molecules are evenly absorbed.

As a result of this cutting-edge diffusion technology, UNIVADINE® E3-3D diffusion accelerant can be used to successfully dye polyester fibers in tightly wound or high-density yarn/beam dyeing and is suitable for jet applications without the need for anti-foaming products. Reducing exposure to high heat, its Active Diffusion Technology minimizes the potential to damage the elastane in polyester-elastane blends and provides for on-tone dyeing of microfibers. The superior migration support of UNIVADINE® E3-3D diffusion accelerant also increases reproducibility, allowing mills to dispense with additional leveling agents. Polyester, microfibers and blends treated with UNIVADINE® E3-3D diffusion accelerant comply with the requirements of bluesign®, in addition to being suitable for Standard 100 by OEKO-TEX® and an approved input dyeing auxiliary chemical for GOTS (Global Organic Textile Standard) certified textile products*.

With an investment in an Innovation Center with testing labs and additional production facilities, Carl Meiser GmbH&Co KG gives a clear statement to it’s location in Albstadt in Central Europe. As well this underlines the know-how and the motivation of the whole team. The constructions were already launched. The first buildings for production and a part if the Innovation Center will be ready end of this year. State of the art offices and social facilities will be ready to move in mid of 2019.

“After our suffered setback with the fire in our production facilities in November 2017, this investment will move us much more forward and will give us the motivation to offer our customers even better and more innovative service and products. In long-term view this will creates the base for further growth”, says Jens Meiser CEO of Carl Meiser GmbH&Co.KG. During the last months we already invested in production technology and machines. During the last weeks we changed the complete production organisation to reach a lean product flow.

As well Meiser expanded it’s apprenticeship programme during the last years. At the moment we apprentice new staff members in three different education programmes. It is planned to add a fourth in management in future.

The company Carl Meiser GmbH&Co.KG with it’s brand „MEISER – Know How in textiles“ delivers to the high end underwear and lingerie industry as specialised dyehouse for knitted fabrics. With the brand “NOPMA technical textiles” the company acts as a fast growing development and production partner for the aviation, automotive and furniture industry as well the protection fabric industry. For this industries coated fabrics are developed and delivered to the markets. “In this sector we grow continuous during the last years. We are convinced that our investment in the Innovation Center will support this growth next to our first presence as exhibitor on the fair Techtex in 2019”, says Jens Meiser.

In the approval phase the company was supported by the city of Albstadt in all necessary questions. Fast and possible solutions were found. This shows the Mittelstands-friendly climate in this region in south Germany. The invest is supported by the national programme “Spitze auf dem Land” by the country of Baden-Württemberg and the EU.

FILPUCCI GROUP proceeds along the path of commitment towards an ever more responsible innovation. The group takes part in the 83rd edition of Pitti Filati (June 27-29, 2018) with unique products, high-end knitwear and creative yarns, all resulting from the authentic Smart Innovation the company has been long committed to.
 
Research, style and fashion are key words for the world-renown Tuscan company, which unveils an always more responsible approach both at a corporate level and in terms of offer.
Here are some key elements to prove Filpucci’s relentless commitment:

• The GOTS (Global Organic Textile Standard) and OCS (Organic Content Standard) certifications obtained by the Filpucci dyeing plant add to the Clear to Wear (CTW) standard developed by Inditex Group and achieved in 2014 and to the Detox commitment, which was signed in February, 2016.
• Not only the best raw materials, but also an established knowhow in the fields of dyeing and finishing, always under the key concept of Responsible Innovation. This concept extends to each and every FILPUCCI collection and their ever-increasing offer, the roughly twenty innovative new items, the Woolen line of carded yarns and the real spearhead of premium fashion, the Collection. Among this season’s new offer: Baby Camel Re.Verso™, RWS- certified merino organic wool, Re.Verso™ cashmere, organic silks and FSC-certified viscose.
• The achievement of further certifications such as the FSC (Forest Stewardship Council) for viscose shows the care and respect towards the ecosystem as a whole, guaranteeing a product derived from a forest or a plantation forest in the respect of strict environmental, social and economic standards. The RWS (Responsible Wool Standard) finally guarantees the use of wool coming from livestock managed under rigorous criteria oriented towards the wellbeing of animals and the reduction of environmental impact.
• Filpucci Group is all about a constant vocation towards new generation values and a reliable, traceable and transparent manufacturing process, as shown by the Re.Verso™ circular economy supply chain, of which the group is a unique ambassador in the field of high-end/low-impact knitwear yarns.

With absolute quality always in mind, FILPUCCI GROUP represents a corporate model that has made of sustainability a real mission, embarking on complex paths that have brought great results with fashionable textile solutions lead by ethnical and sustainable values. Thanks to this, Filpucci’s products have become part of Patagonia Collections, an important acknowledging from the brand’s part, whose managers stated: “We are always on the hunt for the highest performing, lowest impact materials. We were thrilled to find Re.Verso ™ (95/5 transformed) Cashmere yarn from Filpucci. It allowed us to create a range of products with the insulative and soft properties of cashmere while adhering to our mission statement; build the best product, cause no unnecessary harm.”
FILPUCCI GROUP’s commitment is evident and it moves forward thanks to the passion towards responsible and innovative paths that contribute to turning the group into a reliable partner, symbol of quality and excellence.

Filpucci is also a C.L.A.S.S. (Creativity Lifestyle And Sustainable Synergy) partner.

Archroma, a global leader in color and specialty chemicals, has presented an aniline-free* denim indigo dye at the recent Planet Textiles 2018 Conference in Vancouver, Canada. The brand new dye provides a non-toxic way to produce the traditional, iconic indigo blue that consumers associate with denim and jeans.
Currently, aniline impurities are an unavoidable element of producing indigo-dyed denim. Unlike other chemical impurities, aniline is locked into the indigo pigment during the dyeing process and therefore cannot be washed off the fabric.

Scientific testing has shown that aniline impurities are toxic to humans, causing skin allergies, damage to major organs and genetic defects, as well as being linked to cancer. Aniline is also toxic to aquatic life, which is an issue as two thirds of the 400 metric tons of aniline waste on an annual basis ends up in the environment as wastewater discharge. The toxic chemical is therefore starting to feature on the restricted substance lists (RSL) of some major clothing brands and retailers. “We have tested denim garments and found that aniline concentrations are frequently higher than expected,” says Alexander Wessels, CEO, Archroma. “This could put some manufacturers over the limits agreed on their RSLs.”

True to its commitment to take on innovation challenges, Archroma decided to take a closer look at the issue with its R&D experts, and developed an alternative system that is aniline free*.
“At Archroma, we continuously challenge the status quo in the deep belief that we can make our industry sustainable,” continues Alexander Wessels. “By removing a hazardous impurity from the denim supply chain, we aim to protect the workers who create denim, the consumers who wear denim, and the environment with cleaner waterways.” The Denisol® Pure Indigo 30 dye is the latest in a long line of sustainable innovations for denim started in 2009. That year, Archroma introduced its ‘Advanced Denim’ technology which uses up to 90% less water during the dyeing process. “Being not indigo but sulfur based, ‘Advanced Denim’ itself was an aniline free solution too!”, adds Alexander Wessels. For designers and brand owners who long for authentic indigo inspiration, the new Denisol® Pure Indigo 30 now also makes it possible to produce indigo-dyed denim without high levels aniline impurities. Archroma successfully tested Denisol® Pure Indigo 30 at Absolute Denim mill in Thailand. “During the testing everything performed exactly the same as it would with conventional indigo,” says Vichai Phromvanich, Board Member, Absolute Denim. “There was just one important difference: no aniline.”

“We’ve had an overwhelming positive reaction from the industry in sneak previews and during the launch at Planet Textiles,” continues Alexander Wessels. “As a responsible industry leader, we believe it’s important to actively look for eco-advanced solutions that are attractive and at the same time cost-efficient for clothing brands, retailers and end-consumers.”

Archroma will make the Denisol® Pure Indigo 30 dye in the most sustainable way as possible. The new dye will be produced in Archroma’s facility in Pakistan, a plant that made the headlines in 2012 for being what Archroma believed to be the industry’s first zero liquid discharge plant.

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.
Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs. Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

Among the Aerospace promotions at Hexcel’s booth are carbon-reinforced 3D printed parts, made from Hexcel’s HexAM™ additive manufacturing technology that uses PEKK ultra-high performance polymers. Hexcel acquired this technology from Oxford Performance Materials in December 2017 to provide a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Aircraft engines benefit from a number of Hexcel technologies that will be promoted at JEC 2018, including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.
Another honeycomb innovation from Hexcel is Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs. An example of this technology will be on display at JEC 2018.

Rounding off the aircraft engine exhibits is a CTi fan blade for new generation lightweight turbofan engines from Rolls-Royce, manufactured from Hexcel’s HexPly® M91 high toughness and impact-resistant epoxy prepreg. Hexcel supplies HexPly® M91 as slit tape for the automated lay-up of the complex aerodynamic shape, with a constantly changing thickness across the blade length. The blade which is thinner and lighter than titanium fan blades is currently undergoing flight tests.
Hexcel’s HiTape® and HiMax™ dry carbon reinforcements that were developed for the automated lay-up of preforms for resin-infused aerospace structures will be promoted at the show. Two demonstrator parts, one made with HiMax™ and one with HiTape®, were both infused with HexFlow® RTM6 resin to demonstrate the potential benefits of an integrated design for aircraft skins, spars and stiffeners that meets OEM requirements for production rate increases and cost effectiveness.

Hexcel is also introducing its new range of HiFlow™ advanced liquid resins for aerospace structures manufactured by liquid molding technologies. Based on novel proprietary chemistry, the new resin family will enhance the performance of composites and ease processing when combined with HiTape® and HiMax™ dry carbon reinforcements. HiFlow™ HF610 is the first resin in the range.
Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil last October. Hexcel is relaunching the acquired products under the new HexBond™ brand name at JEC World. This fast-growing range of pastes, liquid shim and film adhesives has a wide spectrum of operating temperatures and is in qualification with a large number of aerospace and industrial OEMs.
In the Planet Aerospace area at JEC, Daher and Hexcel will jointly display an aircraft spar manufactured from HexPly® M56 prepreg. Hexcel’s Neil Parker and Daher R&T Director Dominique Bailly will give a joint presentation focusing on the materials used and the benefits for the finished part. The aircraft spar was designed and manufactured by Daher using Hexcel’s HexPly® M56 prepreg, in slit tape format, that was developed for automated deposition and out-of-autoclave curing. The spar was manufactured using only the vacuum bag process and demonstrates very low porosity levels. It is currently undergoing testing and validation through CORAC funding.

Hexcel’s Automotive promotions at JEC World 2018 include a new prepreg for composite leaf springs, HexPly® M901. In contrast to steel leaf springs used for suspension on vans, trucks and SUVs, newer composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. Hexcel’s HexPly® M901 prepreg raises the bar further, reducing mold cure time below 15 minutes, a 50% reduction compared to standard industrial prepregs. HexPly® M901 provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure. Hexcel’s expertise in manufacturing heavy weight glass UD prepregs, with fiber areal weights of up to 1600gsm, allows the company to offer a highly cost-competitive solution for the rapid manufacture of these safety critical components.

Hexcel is constantly seeking ways to ensure that customers obtain the maximum benefit from composites and has recently acquired state-of-the-art simulation technology that accurately predicts how HiMax™ non-crimp fabrics will drape in a mold. Working in collaboration with Nottingham University Hexcel has created a car seat shell, for which the material selection was optimized using this new drape simulation technology. Visitors to Hexcel’s stand at JEC will see an on-screen demonstration that illustrates how the simulation tool operates, predicting process and performance and ensuring that the optimum fabric architecture is quickly identified, reducing the need for expensive trial programs.
Hexcel’s HexMC®-i 2000 carbon fiber/epoxy molding compound has been successfully used by Audi to manufacture a high-performance engine cross brace. HexMC®-i is a fast curing high-performance molding material, suitable for the series production of complex shaped parts and providing excellent mechanical properties. The Audi cross brace covers the engine, providing torsional stiffness for enhanced drive dynamics.

Hexcel’s product offering for customers in the Marine industry has expanded following the acquisition of Formax in 2016 and Structil in 2017. At JEC World, Hexcel will promote its enhanced portfolio of carbon fibers, prepregs, woven reinforcements and multiaxial fabrics for builders of racing catamarans and luxury yachts.
Marine customers have supplied a number of parts for display to illustrate their expertise in manufacturing composite structures from Hexcel materials. These include part of a Diam 24 yacht mast made by ADH Inotec from Hexcel’s HexPly® M79 fast curing, low temperature cure prepreg. ADH Inotec purchased the prepreg from Composites Distribution, a Hexcel Official Distributor that also supplied HexPly® M9.6 prepreg to Lorima for the Outremer 5X catamaran mast section on display. Part of Lorima’s 42m wing mast for a multihull racing boat made with HexPly® prepreg from Vert-Le-Petit (formerly Structil) will complete the marine display.

Hexcel’s innovations for Wind Energy include Polyspeed® pultruded laminates for load-carrying elements in wind blades. These continuous cross-section profiles, made from a polyurethane matrix reinforced with unidirectional carbon fiber, provide consistently high mechanical properties, including high stiffness, fracture toughness and shear strength, combined with low weight and durability. Visitors to Hexcel’s stand will see a 2m diameter coil of pultruded carbon laminate that contains 255m of material in a single roll. This technology offers an economical way of reinforcing large-scale composite structures such as wind turbine blades. Hexcel will also launch its surface finishing prepreg for wind turbine blades and components. This provides a tough, durable and ready-to-paint blade surface without the use of gel coat and results in faster blade manufacture, saving time in production and reducing material costs. The benefits of the new surfacing prepreg will be demonstrated via a wind blade exhibit that has been given four different treatments across the blade surface. These include a section with gel coat, a section of standard prepreg without gel coat, and a section where a fleece has been added to improve surface quality but still requires preparation before painting due to pin holes. The final section made with new HexPly® XF2P surfacing prepreg has a ready-to-paint surface, straight from the mold, without any requirement for gel coat, fleece or finishing operations.

The market for the production of carpet yarn is increasingly evolving towards more demanding processes. However, beyond commodity products, standard plants can no longer fully exploit their advantages. From 20th to 22nd March 2018, Oerlikon Neumag will be presenting an economical alternative in Shanghai in hall W3, booth F03 at the Domotex asia/Chinafloor, the leading floor covering trade fair in the Asia-Pacific region: the BCF plant Sytec One with single-end technology.

If the requirements for the production of BCF yarns increase, for example, from recycled polyester or fine filaments, then this can also lead to higher breakage rates. Highly standardised production plants must then often strike compromises with regard to throughput, quality or cost-efficiency. In such cases, the Sytec One offers a good solution instead of the mostly three-end technology plants for standard processes.

Single-end technology with 98% productivity

This BCF plant works with only one yarn (end) per position, making it ideal for demanding production processes. The reason: when a yarn break occurs only one yarn tears, all other yarns continue to run. This not only simplifies troubleshooting, it also reduces the re-threading time. In addition, less waste is produced. As a result, the productivity of the Sytec One is still over 98% for ten breakages a day, while a plant with three-end technology only reaches around 92%.

Faster processes due to a straight yarn path

In addition, the absolutely straight yarn path of the Sytec One enables significantly higher process speeds of up to 15% in spinning and texturing processes compared to multi-end technologies. Higher total titers of up to 6,000 dtex can also be produced without any problems. The gentle yarn guidance also ensures minimum friction on the individual filaments. This means less yarn breaks and a more stable process.

Optimised key component: spinning pack

Last but not least, the engineers at Oerlikon Neumag have developed a new design for the spinning pack. This central component of every BCF machine significantly influences the yarn quality. The corresponding solution for the Sytec One optimises the polymer flow in the spin pack, thus reducing the polymer dwell time. This leads to shorter product and colour change times and increases the plant efficiency. In addition, the spinning packs were widened so that yarns with up to 500 filaments can now be produced.

The product mix is decisive

In view of these advantages, the single-end Sytec One is recommended for processes with high breakage rates, fine filaments, frequent colour changes or in general when demanding processes take up an increasing share in the business. "The product mix is decisive for the choice of technology," sums up Alfred Czaplinski, Sales Manager BCF at Oerlikon Neumag. "We are happy to advise on the optimal solution and offer both single-end and three-end plant technologies." 

Good business at the Domotex Hanover, Germany

In the run-up to the trade fair, the Domotex Hanover in mid-January was already proving to be a promising harbinger. With four lively trade fair days and contract conclusions in the lower double-digit million euro range, mainly from the European and Asian markets, the order intake for Oerlikon Neumag was very good.

Première Vision has once again been chosen by Archroma to present its developments combining creativity, technology, and sustainable approach. Color Atlas - Archroma's innovative color system dedicated to designers, brands, retailers, and the whole industry - confirms itself as the ideal tool to bring fashion inspiration to life, enhancing functionality in all stages of the process

Archroma, a global leader in color and specialty chemicals, will showcase the latest in its advanced color-management solutions at Première Vision Paris, Hall 6 Booth 6U2. The Color Atlas system will also be featured in MintModa’s SS19 seasonal inspirations, presented on February 14, 2018 at Hall 5, Room 504, at 3pm and 4pm.

Color Atlas: a game-changing system for fashion design

How many shades can creativity have? The Color Atlas by Archroma®, through no less than 4,320 hues and color swatches, truly gives shape to any imagination. This is Archroma Color Management’s groundbreaking platform specially devised to address the needs of designers, brands, retailers, and manufacturers, enhancing creative possibilities for the industry as well as manageability and time to market through key complementary tools:

• The Color Atlas Library is the six-volume physical reference to the 4,320 color swatches and cotton poplin samples, secured yet easily removable and absolutely intuitive to be browsed thanks to the accordion-fold design of the catalogues. A compact edition of the Color Atlas is also available, including the very same color variety while being slimmed down from six to two volumes for increased portability.
• Color Atlas Online is the mobile-friendly designer’s companion to find the perfect color matching while on-the-go or in the office. Through this feature, it’s possible to capture an inspiring image using a smartphone and immediately identify the closest Color Atlas shade palette, with the possibility to purchase a color sample instantly. A new patent-pending technology powered by NFC, exclusively introduced by Archroma, also adds swatch-specific information to each Engineered Color Standard, giving retailers, brands, and mills instant access to dye recipes and more color information than ever. The online system also allows to create personal special collections of colors or products that can also be shared, both internally and with suppliers.

The colors of SS19 trends by MintModa, in collaboration with Archroma

During Première Vision, SS19 seasonal inspirations by MintModa will also highlight the main trends for the new collections, with color ranges referenced using Color Atlas by Archroma®.
On February 14, both at 3pm and 4pm at Hall 5, Room 504, Sharon Graubard (Founder/Creative Director of MintModa) will introduce a highly visual and emotive presentation that captures the zeitgeist with four compelling SS19 color and style narratives. Each design story is told with evocative, style-centric imagery from global runway and street, consumer profiles, beauty and wellness, art, architecture, and other culturally impactful touchpoints. This presentation identifies emerging influences relevant to all design industries.
A limited-edition MintModa x Archroma SS19 color card will be distributed to all attendees.

Cost-efficient BCF yarn production for demanding processes with Sytec One from Oerlikon Neumag

Cost-efficient production of carpet yarns beyond commodity products can constitute a challenge. Highly standardized production systems must strike compromises with regard to throughput, quality or cost-efficiency. At the Domotex 2018, the world's largest trade fair for floor coverings, Oerlikon Neumag will present the Sytec One solution for demanding BCF processes.

The Sytec One is a BCF plant with only one end per position. Due to this single-end characteristic, it is particularly well suited for demanding production processes, such as recycled polyester or fine filaments. The reason: In the event of a yarn break, only one end breaks. All the other positions are not affected and continue to run. As a result, this plant has a higher efficiency compared with a multi-end technology plant. For example, with ten breaks a day, the efficiency of the Sytec One is still over 98%, while a threeend technology achieves only 92% efficiency.

Higher productivity due to the straight yarn path

The machine concept of the Sytec One with its absolutely straight yarn path in spinning and texturing also enables significantly higher process speeds compared to multi-end technologies. This results in a speed increase of up to 15%. In addition to standard processes, more demanding processes with higher break rates play an increasingly important role. "The product mix is critical to the choice of technology," said Martin Rademacher, vice president of sales Oerlikon Neumag. "We are in the comfortable position of being able to offer our customers both a single-end and a three-end technology."