From the Sector

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.
Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs. Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

Among the Aerospace promotions at Hexcel’s booth are carbon-reinforced 3D printed parts, made from Hexcel’s HexAM™ additive manufacturing technology that uses PEKK ultra-high performance polymers. Hexcel acquired this technology from Oxford Performance Materials in December 2017 to provide a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Aircraft engines benefit from a number of Hexcel technologies that will be promoted at JEC 2018, including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.
Another honeycomb innovation from Hexcel is Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs. An example of this technology will be on display at JEC 2018.

Rounding off the aircraft engine exhibits is a CTi fan blade for new generation lightweight turbofan engines from Rolls-Royce, manufactured from Hexcel’s HexPly® M91 high toughness and impact-resistant epoxy prepreg. Hexcel supplies HexPly® M91 as slit tape for the automated lay-up of the complex aerodynamic shape, with a constantly changing thickness across the blade length. The blade which is thinner and lighter than titanium fan blades is currently undergoing flight tests.
Hexcel’s HiTape® and HiMax™ dry carbon reinforcements that were developed for the automated lay-up of preforms for resin-infused aerospace structures will be promoted at the show. Two demonstrator parts, one made with HiMax™ and one with HiTape®, were both infused with HexFlow® RTM6 resin to demonstrate the potential benefits of an integrated design for aircraft skins, spars and stiffeners that meets OEM requirements for production rate increases and cost effectiveness.

Hexcel is also introducing its new range of HiFlow™ advanced liquid resins for aerospace structures manufactured by liquid molding technologies. Based on novel proprietary chemistry, the new resin family will enhance the performance of composites and ease processing when combined with HiTape® and HiMax™ dry carbon reinforcements. HiFlow™ HF610 is the first resin in the range.
Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil last October. Hexcel is relaunching the acquired products under the new HexBond™ brand name at JEC World. This fast-growing range of pastes, liquid shim and film adhesives has a wide spectrum of operating temperatures and is in qualification with a large number of aerospace and industrial OEMs.
In the Planet Aerospace area at JEC, Daher and Hexcel will jointly display an aircraft spar manufactured from HexPly® M56 prepreg. Hexcel’s Neil Parker and Daher R&T Director Dominique Bailly will give a joint presentation focusing on the materials used and the benefits for the finished part. The aircraft spar was designed and manufactured by Daher using Hexcel’s HexPly® M56 prepreg, in slit tape format, that was developed for automated deposition and out-of-autoclave curing. The spar was manufactured using only the vacuum bag process and demonstrates very low porosity levels. It is currently undergoing testing and validation through CORAC funding.

Hexcel’s Automotive promotions at JEC World 2018 include a new prepreg for composite leaf springs, HexPly® M901. In contrast to steel leaf springs used for suspension on vans, trucks and SUVs, newer composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. Hexcel’s HexPly® M901 prepreg raises the bar further, reducing mold cure time below 15 minutes, a 50% reduction compared to standard industrial prepregs. HexPly® M901 provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure. Hexcel’s expertise in manufacturing heavy weight glass UD prepregs, with fiber areal weights of up to 1600gsm, allows the company to offer a highly cost-competitive solution for the rapid manufacture of these safety critical components.

Hexcel is constantly seeking ways to ensure that customers obtain the maximum benefit from composites and has recently acquired state-of-the-art simulation technology that accurately predicts how HiMax™ non-crimp fabrics will drape in a mold. Working in collaboration with Nottingham University Hexcel has created a car seat shell, for which the material selection was optimized using this new drape simulation technology. Visitors to Hexcel’s stand at JEC will see an on-screen demonstration that illustrates how the simulation tool operates, predicting process and performance and ensuring that the optimum fabric architecture is quickly identified, reducing the need for expensive trial programs.
Hexcel’s HexMC®-i 2000 carbon fiber/epoxy molding compound has been successfully used by Audi to manufacture a high-performance engine cross brace. HexMC®-i is a fast curing high-performance molding material, suitable for the series production of complex shaped parts and providing excellent mechanical properties. The Audi cross brace covers the engine, providing torsional stiffness for enhanced drive dynamics.

Hexcel’s product offering for customers in the Marine industry has expanded following the acquisition of Formax in 2016 and Structil in 2017. At JEC World, Hexcel will promote its enhanced portfolio of carbon fibers, prepregs, woven reinforcements and multiaxial fabrics for builders of racing catamarans and luxury yachts.
Marine customers have supplied a number of parts for display to illustrate their expertise in manufacturing composite structures from Hexcel materials. These include part of a Diam 24 yacht mast made by ADH Inotec from Hexcel’s HexPly® M79 fast curing, low temperature cure prepreg. ADH Inotec purchased the prepreg from Composites Distribution, a Hexcel Official Distributor that also supplied HexPly® M9.6 prepreg to Lorima for the Outremer 5X catamaran mast section on display. Part of Lorima’s 42m wing mast for a multihull racing boat made with HexPly® prepreg from Vert-Le-Petit (formerly Structil) will complete the marine display.

Hexcel’s innovations for Wind Energy include Polyspeed® pultruded laminates for load-carrying elements in wind blades. These continuous cross-section profiles, made from a polyurethane matrix reinforced with unidirectional carbon fiber, provide consistently high mechanical properties, including high stiffness, fracture toughness and shear strength, combined with low weight and durability. Visitors to Hexcel’s stand will see a 2m diameter coil of pultruded carbon laminate that contains 255m of material in a single roll. This technology offers an economical way of reinforcing large-scale composite structures such as wind turbine blades. Hexcel will also launch its surface finishing prepreg for wind turbine blades and components. This provides a tough, durable and ready-to-paint blade surface without the use of gel coat and results in faster blade manufacture, saving time in production and reducing material costs. The benefits of the new surfacing prepreg will be demonstrated via a wind blade exhibit that has been given four different treatments across the blade surface. These include a section with gel coat, a section of standard prepreg without gel coat, and a section where a fleece has been added to improve surface quality but still requires preparation before painting due to pin holes. The final section made with new HexPly® XF2P surfacing prepreg has a ready-to-paint surface, straight from the mold, without any requirement for gel coat, fleece or finishing operations.

For the first time at FILO Milano, Filatura C4 is proud to present, in addition to the already established Re.Verso™ collection for contract, the Blue Drop winning fabric by Audejas, made with Re.Verso™ re-engineered wool. A result born from the shared commitment and vision to integrate a new generation of eco values into their circular economy creations.

Since 1962, Filatura C4 has been known for smart innovation in furnishing contract markets and is now specializing in the recovery of both technical and natural fibers. The company offers a wide range of styles and typologies of yarns for the Technical, Natural and Classic categories. From the choice of raw materials up until the final packaging, Filatura C4 develops and proposes, together with its partners, tailored solutions apt to satisfy a diversified demand. Thanks to its background and its grounding, Filatura C4 is a unique partner for Re.Verso™ in the contract sector.

The collection was planned to satisfy the market’s increasingly more specific needs, which require increased specialization and responsibility in the recovery of textile fabrics. Thanks to the Re.Verso™ system, the company offers quality products with low environmental impact through the use of pre-consumer wool packaging cuts which are collected, selected and processed in an accredited, fully transparent and traceable way. The Re.Verso™ collection is mainly employed in contract and home furnishing.

The Re.Verso™ product is available in a range of counts going from 5,000 to 9,500 Nm and it can be supplied both in singles and in twisted plies.  Re.VersoTM yarns by Filatura C4 are certified by ICEA (Environmental and Ethical Certification Institute) according to GRS (Global Recycled Standard) issued by the international body Textile Exchange and can boast unique savings (in comparison to virgin wool) in terms of energy (-27%), water consumption (-53%), and CO2 emissions (-49%), as certified by the LCA (Life Cycle Assessment) study led by Prima Q.

At Filo, Filatura C4 presents the prizewinning product signed by Audejas, leading Lithuanian producer of upholstery and home textile fabrics since 1946, made for the 75% of wool (55% Re.Verso™ wool) in mix with 20% polyamide and 5% other fibres. This product received the Blue Drop Award on the second day of MoOD 2017. MoOD Brussels is an exhibition dedicated to producers of upholstery, window and wall coverings for the residential and contract market. The Blue Drop exhibition is an inspiring overview of the “best of the best” of what you can find at MoOD selected from creations submitted by exhibitors. Unique in its own way because it is the world’s only quality label of its kind for interior textiles. The “Floris” fabric by Audejas, won the first prize of the Circular Material category, being recognized as a  product that made great effort reducing waste by focusing on eco-centric materials.

As the global textile industry’s most comprehensive sourcing summit for the spring / summer season, Intertextile Shanghai Apparel Fabrics is naturally the ideal place to find the latest developments in product innovation and sustainability. This is especially true in the fair’s Beyond Denim zone, which this edition will feature over 110 exhibitors from China, Japan, Pakistan, Turkey and elsewhere. Adding to a total of some 3,300 exhibitors from around 22 countries and regions, they provide sourcing options for the entire industry, from fabrics for ladieswear, menswear, suiting, shirting, lingerie and swimwear to high-end wool fabrics, original pattern designs, functional & performance fabrics, sustainability products & services, digital printing technologies, garment & fashion accessories and more.

Denim enriched with volcanic ash: the latest innovation from Orta Anadolu
Volcanic ash is not uncommon in beauty products – it is known as Mother Nature’s skin purifier after all, and used as an exfoliator for example – but it is far less common in the textile industry. Orta Anadolu are set to change that with their BIOWARE denim which is enriched with mineralised volcanic ash to create an odour absorbing effect. This technology captures and absorbs odour compounds that would normally pass through the fabric, neutralising bad bacteria while retaining the helpful bacteria that common deodorisers, which contain harsh substances, normally eliminate. This leads to a more environmentally friendly product that is better for the user’s skin.

Orta will also be presenting BIOCHARGE at Intertextile, which, according to the company, is the world’s first denim fabric for muscle wellness. Infused with minerals, Orta state that BIOCHARGE is medically proven to refresh muscles, relieve muscle tension and optimise body balance. They will also present their BOUNCE stretch range, with high elasticity and a ‘street’ style, while CHRONICLE, another in their S/S 19 range, is a blend of heritage and future styles.

US Denim Mills blend tomorrow’s technology with yesterday’s style
Another innovative denim firm exhibiting at Intertextile Shanghai, and another blending old and new, is US Denim Mills. According to the company, their collection at the fair will “harness tomorrow’s textile advances to revitalise the great style visions of the past by adding fashion, comfort, performance and sustainability advantages to authentic denim looks.” This collection includes:

• Selvedge: using the company’s legacy selvedge looms to produce bi-stretch ‘SelvedgeX’ while experimenting with blends of natural yarns and high-tech fibre blends in its ‘HeritEdge+’ range
• Stretch: including ‘Flex 360’ bi-stretch denim with a slight cross-bias freedom, and ‘Modern Stretches’ with a higher stretch range for intense comfort
• SoftWear: advanced finishing treatments for superior soft touch from natural fibre blended yarns and softness-selected weaves
• Sustainable: new additions to the range of recycled and natural ‘GreenEgo’ denims

Kipas Denim step up their sustainability efforts
Well aware of the effect denim production has on the environment, Kipas Denim’s multi-faceted programme to address this is one of the most comprehensive in the denim sector. Their recycled yarn initiative includes recycling waste yarn from the production process, while it also takes waste cotton yarn and blends it with REPREVE® fibres to create an eco-friendly denim fabric. Kipas also uses BCI cotton and organic cotton, and targets each to be 15% and 5% of total consumption, respectively. Furthermore, their Conservablue technology aims to reduce the environmental impact of the dyeing process by eliminating the use of rinsing overflow boxes before and after the indigo dye boxes, as well as ensuring 100% of applied dyestuff remains on the yarn in the rinsing bath.

As well as the overseas offerings, a wide range of domestic denim exhibitors covering all price and quality points will also feature in Beyond Denim. Some of the more notable brands participating include Advance Denim, Black Peony, Guangzhou Foison and Prosperity Textile.

Denim’s ‘next move’ to be debated in INVISTA panel discussion
The market is changing and so must apparel and textile manufacturers. Low prices and discounts are no longer driving sales the way they used to. Today’s consumer wants better quality, appreciates new technology and is evolving their casualwear style. This is the premise behind the INVISTA-sponsored panel discussion which will take place on day 1 of the fair. Titled ‘Denim’s Next Move – New Opportunities to Keep Growing Sales of Jeans and Casualwear at Retail’, participants will learn what consumers really want in jeans and casualwear, the return of chinos and new fabric technologies that are energising casualwear.

The panel will be moderated by Jane Singer, Director and Head of Market Development at Inside Fashion. Panellists will include representatives from Advance Denim, Guangzhou Conshing Clothing Group, Prosperity Textile and Texhong who will share their latest innovations that will help brands and retailers drive sales and profits.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

The 2018 Autumn Edition of Intertextile Shanghai Apparel Fabrics will take place earlier this year, with the industry’s leading trade fair running from 27 – 29 September instead of its usual October timing. It will be held again at the National Exhibition and Convention Center (Shanghai), its home since 2015. The 2017 fair played host to 4,538 exhibitors from 32 countries and regions, and 77,883 trade buyers from 102 countries and regions.

“After extensive consultation with all stakeholders over the past year, we have come to the decision to bring forward the Autumn Edition to September,” Ms Wendy Wen, Senior General Manager of fair co-organiser Messe Frankfurt (HK) Ltd explained. “The autumn / winter sourcing season has steadily moved earlier in the year, and this change in timing is necessary to ensure Intertextile Shanghai remains the leading business platform for both suppliers and buyers in the global apparel fabrics and accessories industry.”

As in previous editions, Intertextile Shanghai Apparel Fabrics will be held concurrently with Yarn Expo Autumn, fashion garment fair CHIC and knitting fair PH Value, making this the most comprehensive sourcing platform in the global industry.

More details of the Autumn Edition will be announced after the conclusion of next month’s Spring Edition, which will take place from 14 – 16 March, where some 3,300 exhibitors and around 70,000 trade buyers are expected to converge.

The acquisition is the fifth strategic deal finalized by Imprima Spa , holding controlled by the Italian private equity fund Wisequity IV.

IMPRIMA S.p.A., the holding company of the multinational group dedicated to textile printing and finishing, announces the acquisition of City Prints and the twin company Premier Fabrics, both American companies specialised in printed textiles. 

Imprima, controlled by Wise SGR through the Italian private equity fund Wisequity, now strengthens its strategic positioning, consolidating its global presence as a leading player in the field of printing and textile finishing for international retailers and fashion brands.

City Prints and Premier Fabrics, founded in 1997 and headquartered in New York and Los Angeles, are specialized in textile printing for the programmed collection market. The companies supply printed fabrics, based on proprietary design, to major American retailers such as Walmart, Target and Macy's, to  fashion brands such as Ralph Lauren, Calvin Klein and Tommy Hilfiger, and to online retailers such as Amazon. The companies serve retailers and brands through leading private label intermediaries, currently sourcing prints and garments mainly from China.  

As in the case of the previous acquisitions, the brothers Jason and Ryan Borg, co-founders of City Prints and Premier Fabrics, will maintain a leadership role in the management of the companies and become shareholders of IMPRIMA. 

 "Our entry into the IMPRIMA group is an excellent opportunity to consolidate and increase our commercial positioning in the market, through the introduction of IMPRIMA Group’s brands in the US market and the opening of a digital production facility within the US territory, relying on the technology know-how in digital printing and the financial support that IMPRIMA provides", said Jason and Ryan Borg co-owners of City Prints and Premier Fabrics, which currently show a consolidated turnover of over 23 million dollars.

“With this acquisition, IMPRIMA deals with the US market with the goal of becoming the first textile converter with full digital printing capability in this local market.  The current deep crisis of American apparel retailers is pushing the industry to reshape its current supply chain strategy, mainly based on sourcing from Far East, towards a European-like fast fashion model. IMPRIMA, through City Prints and Premier Fabrics, will allow local retailers to leverage the "Made in USA" banner to deliver a great creative experience through a local, reliable partner.", said President Valentina Franceschini, and Executive V.P. Gianluca Boni.

This acquisition of the US companies follows the recent acquisition of the Italian print converters SET, Guarisco and B-Blossom and of the German print converter KBC.  

Buyers looking for premium wool fabrics will be spoilt for choice at next month’s Intertextile Shanghai Apparel Fabrics. The epicentre for those with this product on their sourcing checklist is the Premium Wool Zone, with mills from the UK, Italy, France, Peru and elsewhere located here, while the Italy Pavilion also includes a number of quality wool suppliers. Rounding out the sourcing options, and adding further quality and price variety, are the 180-plus domestic wool suppliers in hall 6.1.

Some of the notable overseas brands participating this edition include Abraham Moon & Sons, Aris Industrial, Dechamps, Dormeuil, Dugdale Bros & Co, Ferla, Fratelli Piacenza, Holland & Sherry, Huddersfield Fine Worsteds, Lanificio F.lli Cerruti DAL 1881 and Scabal. The Spring Edition of the industry’s most comprehensive sourcing platform for the spring / summer season, Intertextile Shanghai Apparel Fabrics, will feature some 3,300 exhibitors from around 20 countries covering all apparel fabrics and accessories product groups.

Growing affluence in China drives demand for premium wool fabrics

While a true global marketplace for the industry’s order writers with buyers from around 100 countries expected at Intertextile Shanghai next month, much of the demand for high-end wool at the fair comes from Chinese buyers thanks to growing affluence in the country. This is evidenced by the fact that Australian wool prices are at record highs this season, with China accounting for over 70% of Australian wool exports[1]. What’s more, whereas 15 to 20 years ago most wool imported by China was re-exported, nowadays around 60% is used to produce garments for the domestic market.

Intertextile’s number one position in China ensures that high-end domestic buyers are in abundance. “The buyer professionalism here is surprisingly high,” Mr Bob McAuley, Huddersfield Fine Worsteds’ President, explained last October. “We’re looking specifically for tailors and menswear specialty stores, and these type of buyers are definitely present.” Speaking about domestic market trends, he continued: “Retailers are not able to put all fashion in stores, so the made-tomeasure market is growing, especially in China. I’m surprised each edition how many new high-end Chinese brands we meet at this fair. There’s more menswear specialty stores opening here, whereas in the US, for example, the move is more towards going direct-to-consumer and online.”

Innovation and new-season styles added to heritage brands’ collections  

Precious metals such as gold and silver are known to have been worked into garments as long as 3,000 years ago, when they were hammered into extremely thin sheets then cut into ribbons. Modern technology has made this process much more straightforward, as well as opening up new opportunities. One of these is combining wool and silver, which Holland & Sherry will exhibit at Intertextile Shanghai. Their Argento collection of Super 200's wool fabrics applies a state of the art silver ion technology finish to superfine 13.5µ merino wool. This combination provides effective antibacterial protection, counteracting bacterial odour formation and keeping the fabrics hygienic and fresh. And because the conductive properties of silver prevent the build-up of static charge, the fabrics also benefit from anti-static properties.

While most collections in the Premium Wool Zone emphasise the brands’ heritage and tradition, like Holland & Sherry, some will be introducing new or updated collections. Dugdale Bros & Co refreshed its Royal Classic superfine Australian merino wool collection last year for the first time since 1987, adding around 30 patterns drawn directly from its original archive. Abraham Moon & Sons will showcase new fabrics at the fair for spring / summer ‘19 designed by Creative Director Martin Aveyard, which take in categories of classic, casual and contemporary, with a unique use of worsted, linen and cashmere combinations.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

At Milano Unica, as key inspiring article, ILUNA presented an exclusive and elegant lace long dress, created in collaboration with Valery, starting from an all over textronic ultralight lace with a complex organic design completely made of recycled materials, using ROICA™ Eco-Smart family, a world-first range of responsible made premium stretch yarns, demonstrating, once more, how the two leading innovators continue their close partnership to present the most “advanced” and responsible solutions to the market today.

Nevertheless, for ILUNA smart innovation is not just a project even, at its space at Milano Unica visitors will had the opportunity to discover the new collection and also to experience and touch the latest boundaries of lace smart innovations. This season novelties include:

1. Green Label collection, the Iluna dedicated range featuring a new responsible approach in respect of the planet and people, able to deliver innovation, beauty and quality, at 360°. This season, in addition to the all over, jacquard, double jacquard and mesh offer, the line is also featuring  new stretch Galloon laces fully made with GRS certified recycled  materials, including the stretch thanks to the introduction of the unique ROICA™ sustainable yarn part of the ROICA™ Eco-Smart family. 
2. ILUNA is also proud to introduce a worldwide première: Eco- Smart family made of sustainable yarns allover laces made with NAIA cellulosic fiber by Eastmann combined with ROICA™ premium stretch sustainable yarn   realized on warp knitting jacquard looms. A unique innovation, with an interesting look & feel combined with a special softness!  
3. ILUNA has strategically included in all their stretch laces only ROICA™ Eco-Smart family of sustainable yarns since some time. The company is pleased to introduce the latest version of this yarns that are able to deliver 3 functions in one:  premium stretch, sustainability combined with the ROICA™ Colour Perfect family function offering excellent flawless and world unique colour dimensions, homogeneity.
4. For the salon, another première:  in cooperation with ROICA™ and Cupro by Asahi Kasei, Iluna is pleased to introduce ‘Smart Bucket Bag’ as a  special  limited edition gift. In origin, this was a roomy bag shaped like a bucket taller than it is wide with a rounded bottom. It first came to fashion in the 1900's, from a pouch with a string and a hardened bottom. Federica Annovazzi idea started from the traditional shape, but it went way beyond and imade it contemporary by smart materials and manufacturing. A beautifully crafted ‘double face recipe’ made  combining a luxurious Cupro fabric by Infinity with an Iluna stretch Double face Smart Bucket bag lace designed and produced with ROICA™ Eco-Smart family of sustainable yarns. The bag is manufactured exclusively by Made in Carcere a cooperative of women in rehabilitation, so creating a useful social exchange as well as a responsible and smart one. The Made in Carcere brand was founded in 2007, thanks to Luciana Delle Donne, founder of Officina Creativa, a non-profit social cooperative.
5. ILUNA can also boast its new STeP (Sustainable Textile Production) certification by Oeko-Tex, a certification that clarifies and communicates the company’s sustainable production commitment. In addition to this, all products are Oeko-Tex 100 certified.

ILUNA’s newest digital programs:

• ILUNA has created the new e-shop offering its exclusive materials to smaller companies looking for added values as: creativity, innovation, made in Italy and responsibility. 
• The whole collection is also visible online at its web site, previous registration, and orders can be done directly online always aiming to customers care.

Today ILUNA represents the largest European lace producer, and thanks to its journey toward the most contemporary way to innovate that includes responsibility, has also become a reference point in the international market for a lace offer that is beautiful, innovative and responsible at the same time. An alchemy of design and sustainable innovation, the only eco-fashion line that includes lace and stockings, capable of combining ethics and high quality standards with a fashion image of bright and deep colors. 

At the upcoming ISPO exhibition, SITIP are pleased to introduce BEHOT, a SITIP Heat Generating Technology for fabrics that has been licensed from the unique ROICA™ StretchEnergy™ System by Asahi Kasei and is already adopted by Santini that is offering Premium cycle wear Made in Italy since 1965.

SITIP is a leading Italian textile company specialized in high-tech and function-rich innovations for sport, technical underwear, shapewear, beachwear, footwear components, protective helmets, and in particular Velcro-receptive fabrics for mechanical fastening systems and a number of innovative technical fabrics for other industrial end-uses, all made through key manufacture technologies that include weft & warp knit fabric innovations.

Further, SITIP has more recently launched 16 unique trade brands, each one specialized in highly advanced innovation solutions designed to fit both market and the discerning needs of the contemporary consumer.

Santini is offering to the market a multi-panel thermal bib tight for the coldest winter training. Made with the special BeHot fabric by Sitip, constructed with the ROICA™ StretchEnergy™ active performance material, it not only insulates, but generates up to 2 degrees of heat as you workout as certified by CeRism, Outdoor Sport Research Centre at Verona University. Complete comfort and protection thanks to the Acquazero by Sitip treatment that ensures you stay dry even in the most challenging conditions.

The design is completed with breathable mesh braces for added comfort and a reflective pixel detail on the leg to improve visibility in low light conditions. BeHOT represents a special combination of a highly refined type of knitted construction combined with this unique ROICA™ Premium Stretch yarn function, and has been especially developed for this new high-function concept.

At the Munich Fabric Start in Munich, TINTEX proudly announced its complete switch from the use of conventional cotton and the concomitant launch of a new fabric range that is the highest expression of the new generation of cotton: Naturally Advanced Cotton by TINTEX.

This new range is able to offer an advanced smart choice of 4 different premium and responsible advanced cotton solutions such as BCI Cotton, ECOTEC® by Marchi & Fildi, GOTS certified organic cotton and Supima. These new fabrics maintain and upgrade the transparent, hi-tech and sustainable organics that are at the heart of the TINTEX DNA. They represent better, smarter ecomaterials with new levels of performance and hi-tech smarts, thanks to a first class expertise in specialist dyeing and finishing techniques, coatings and applications that use the latest research, equipment and processes to deliver it. 

This new launch is confirming once more the commitment of TINTEX to its ‘Naturally Advanced’ position meaning “advancing beautiful, organic and natural materials to the next level combined with unique, hybrid ‘nature-tech’ smarts, with added value and creativity, thanks to dedicated investments that serve and secure our customer’s demands both now and in the seasons to come” says CEO Mario Jorge Silva.

The “Naturally Advanced Cotton” on Collection by TINTEX:

BCI cotton: The Better Cotton Initiative has specific aims:

• Reduce the environmental impact of cotton production
• Improve livelihoods and economic development in cotton producing areas
• Improve commitment to and flow of Better Cotton throughout supply chain.

ECOTEC® by Marchi & Fildi: a range of full-colour yarns, a smarter cotton made from pre-consumer clippings that save up to 77,9% water during manufacture. This season TINTEX is also introducing a new, finer ECOTEC® yarn called Phoenix, also GRS certified, being made from 50% ECOTEC® cotton and 50% recycled polyester. Here wellbeing credentials are guaranteed with Tessile e Salute* certification. 

GOTS Organic Cotton: The Global Organic Textile Standard GOTS is the most important standard for sustainable production of garments and natural fiber textile products from organic farming such as organic cotton or organic wool. GOTS criteria measures environmental, technical quality, toxicity and social impacts. GOTS is backed by independent certification for the entire supply chain.

Supima Cotton: Luxury, quality and craftsmanship are the benchmarks of American-grown, extra-long staple cotton. TINTEX offers 100% Supima precious fabrics and blends with tencel.

These special 4 cotton actors are made even more “advanced” by unique smart finishing as Plummy and Naturally Clean, for clean surfaces, bright colours, outstanding touch always with a very careful eye at the responsible values.  

At this year's Heimtextil, which took place from 9-12 January in Frankfurt, Trevira impressed visitors with a brand new fair concept. The company worked together with sixteen of its biggest customers to create a joint booth covering 1,305 square metres of Hall 4.2, drawing a large crowd.

Head of Marketing, Anke Vollenbröker, explained, "Thanks to our new approach and booth concept, we were able to present our brand Trevira CS in an open and welcoming manner plus highlight the good relationship we have with our customers."

Trevira CEO Klaus Holz added, "We are really pleased with the very positive feedback we have had from all sides in response to our grand Trevira CS joint booth. We would like to thank everyone who has contributed to the booth's success. The extremely positive market reaction has reassured us that this is a concept we can build on in the future."

A Trevira exhibition formed the centrepiece of the joint booth, showcasing the winning fabrics from the 2018 Trevira CS Creativity Competition, which this year featured "Colour" as its major theme. At the heart of the display, visitors could find out more about Trevira with the help of twelve tablets providing information in a variety of formats, including a staff presentation and a flyer about the new Trevira Sinfineco® brand.

Encircling this core and thereby completing the joint booth concept, sixteen major customers grouped their individual stands around this centrepiece to display their own new Trevira CS collections for residential and contract usage. The customers joining Trevira to create the booth were Baumann Dekor Ges.m.b.H., Engelbert E. Stieger AG, FIDIVI Tessitura Vergnano S.p.A., Georg + Otto Friedrich, Jenny Fabrics AG, Johan van den Acker Textielfabriek B.V., Mattes & Ammann GmbH & Co. KG, Pugi R.G. S.R.L., Spandauer Velours GmbH & Co. KG, SR Webatex GmbH / Getzner Textil AG, Swisstulle AG, Tessitura Mario Ghioldi & C. srl, Torcitura Fibre Sintetiche S.p.A., Torcitura Lei Tsu S.r.l. / Ilcat S.p.A., Vlnap a.s. / Wagenfelder Spinning Group and Wintex S.r.l..

Another major section of the Trevira booth was dedicated to the world of acoustics. Increasingly, customers are (re)discovering textiles as a way to significantly improve the quality of room acoustics, and this part of the booth also attracted numerous visitors.

A special highlight at the joint booth were the Trevira CS sports shoes, worn by Trevira staff as a key element of the brand's trade fair outfit. The shoes are an Adidas Originals Special Edition of the iconic Stan Smith Silhouette, which Adidas manufactured in cooperation with Kvadrat.

In keeping with annual tradition, the new Trevira CS Gold and Silver Club members were announced during the Heimtextil fair. The new members were presented with their awards at a formal ceremony on Tuesday evening (9 January).