From the Sector

• More than 30 leading pioneers of the chemical and material sector welcome the latest political papers from Brussels, Berlin and Düsseldorf

The political situation for renewable carbon from biomass, CO2 and recycling for the defossilisation of the chemical and materials industry has begun to shift fundamentally in Europe. For the first time, important policy papers from Brussels and Germany take into consideration that the term decarbonisation alone is not sufficient, and that there are important industrial sectors with a permanent and even growing carbon demand. Finally, the need for a sustainable coverage of this carbon demand and the realisation of sustainable carbon cycles have been identified on the political stage. They are elemental to the realisation of a sustainable chemical and derived materials industry.

The goal is to create sustainable carbon cycles. This requires comprehensive carbon management of renewable sources, which includes carbon from biomass, carbon from Carbon Capture and Utilisation (CCU) – the industrial use of CO2 as an integral part – as well as mechanical and chemical recycling. And only the use of all alternative carbon streams enables a true decoupling of the chemical and materials sector from additional fossil carbon from the ground. Only in this way can the chemical industry stay the backbone of modern society and transform into a sustainable sector that enables the achievement of global climate goals. The Renewable Carbon Initiative’s (RCI) major aim is to support the smart transition from fossil to renewable carbon: utilising carbon from biomass, CO2 and recycling instead of additional fossil carbon from the ground. This is crucial because 72% of the human-made greenhouse gas emissions are directly linked to additional fossil carbon. The RCI supports all renewable carbon sources available, but the political support is fragmented and differs between carbon from biomass, recycling or carbon capture and utilisation (CCU). Especially CCU has so far not been a strategic objective in the Green Deal and Fit-for-55.

This will change fundamentally with the European Commission's communication paper on “Sustainable Carbon Cycles” published on 15 December. The position in the paper represents an essential step forward that shows embedded carbon has reached the political mainstream – supported by recent opinions from members of the European parliament and also, apparently, by the upcoming IPCC assessment report 6. Now, CCU becomes a recognised and credible solution for sustainable carbon cycles and a potentially sustainable option for the chemical and  material industries. Also, in the political discussions in Brussels, the term “defossilation” is appearing more and more often, complementing or replacing the term decarbonisation in those areas where carbon is indispensable. MEP Maria da Graça Carvahlo is among a number of politicians in Brussels who perceive CCU as an important future industry, putting it on the political map and creating momentum for CCU. This includes the integration of CCU into the new Carbon Removal Regime and the Emission Trading System (ETS).

As the new policy documents are fully in line with the strategy of the RCI, the more than 30 member companies of the initiative are highly supportive of this new development and are ready to support policy-maker with data and detailed suggestions for active support and the realisation of sustainable carbon cycles and a sound carbon management. The recent political papers of relevance are highlighted in the following.

Brussels: Communication paper on “Sustainable Carbon Cycles”
On 15 December, the European Commission has published the communication paper “Sustainable Carbon Cycles” . For the first time, the importance of carbon in different industrial sectors is clearly stated. One of the key statements in the paper is the full recognition of CCU for the first time as a solution for the circular economy, which includes CCU-based fuels as well. The communication paper distinguishes between bio-based CO2, fossil CO2 and CO2 from direct air capture when addressing carbon removal and it also announces detailed monitoring of the different CO2 streams. Not only CCU, but also carbon from the bioeconomy is registered as an important pillar for the future. Here, the term carbon farming has been newly introduced, which refers to improved land management practices that result in an increase of carbon sequestration in living biomass, dead organic matter or soils by enhancing carbon capture or reducing the release of carbon. Even though the list of nature-based carbon storage technologies is non-exhaustive in our view, we strongly support the paper’s idea to deem sustainable land and forest management as a basis for the bioeconomy more important than solely considering land use as a carbon sink. Surprisingly, chemical recycling, which is also an alternative carbon source that substitutes additional fossil carbon from the ground (i.e. carbon from crude oil, natural gas or from coal), is completely absent from the communication paper.

Berlin: Coalition paper of the new German Government: “Dare more progress – alliance for freedom, justice and sustainability”
The whole of Europe is waiting to see how the new German government of Social Democrats, Greens and Liberals will shape the German climate policy. The new reform agenda focuses in particular on solar and wind energy as well as especially hydrogen. Solar energy is to be expanded to 200 GW by 2030 and two percent of the country's land is to be designated for onshore wind energy. A hydrogen grid infrastructure is to be created for green hydrogen, which will form the backbone of the energy system of the future – and is also needed for e-fuels and sustainable chemical industry, a clear commitment to CCU. There is a further focus on the topic of circular economy and recycling. A higher recycling quota and a product-specific minimum quota for the use of recyclates and secondary raw materials should be established at European level. In the coalition paper, there is also a clear commitment to chemical recycling to be found. A significant change for the industry is planned to occur in regards to the so-called “plastic tax” of 80 cents per kilogram of non-recycled plastic packaging. This tax has been implemented by the EU, but most countries are not passing on this tax to the manufacturers and distributors, or only to a limited extent. The new German government now plans to fully transfer this tax over to the industry.

Düsseldorf: Carbon can protect the climate – Carbon Management Strategy North Rhine-Westphalia (NRW)
Lastly, the RCI highly welcomes North Rhine-Westphalia (NRW, Germany) as the first region worldwide to adopt a comprehensive carbon management strategy, a foundation for the transformation from using additional fossil carbon from the ground to the utilisation of renewable carbon from biomass, CO2 and recycling. For all three alternative carbon streams, separate detailed strategies are being developed to achieve the defossilisation of the industry. This is all the more remarkable as North Rhine-Westphalia is the federal state with the strongest industry in Germany, in particular the chemical industry. And it is here, of all places, that a first master plan for the conversion of industry from fossil carbon to biomass, CO2 and recycling is implemented. If successful, NRW could become a global leader in sustainable carbon
management and the region could become a blueprint for many industrial regions.

Over the past 14 days, the wholesale cost of natural gas in Germany has risen by more than 50%. This increase presents an extraordinary challenge for industry, and there is no sign of support or intervention from the Government. Indeed, recent statements are destined to provoke a worsening of the situation.

Kelheim Fibres is entirely dependent on natural gas for the generation of electrical energy and steam and has no viable short-term alternatives. In addition, the raw materials used by the company often consume high levels of energy in their production and are also increasing significantly in cost. These increases in cost jeopardise the future of the business if they cannot be passed on though the supply chain.

Kelheim Fibres is calling on the Government of Germany to take immediate steps to mitigate the impact of the cost increases for natural gas and is committed to work to implement alternative sources of energy in the medium term.

In parallel, the disruption to global logistic networks that has been seen throughout 2021 is now expected to continue throughout 2022. Massive increases in shipping rates – in some cases in excess of 80% – are being imposed without notice and with no opportunity for negotiation. These costs must also be passed on though the supply chain if businesses are to remain viable.

To address these issues, Kelheim Fibres is implementing the following measures with immediate effect:

• The increased cost of energy and freight will be passed on in prices to customers at the soonest opportunity;
• If necessary, changes or adjustments to existing agreements will be negotiated to reflect the increased cost levels;
• If the necessary increase in fibre prices cannot be secured, cuts to production will be implemented with the objective of minimising losses until the cost increases can be mitigated.

As the drivers for the increases in natural gas prices appear to be temporary in nature, we will maintain any price adjustments under review and pass on any relief to customers.

Craig Barker, CEO of Kelheim Fibres, describes the current situation as critical. “The cost increases we are facing are unprecedented and call for swift and decisive action. We are determined to take the necessary steps to preserve the future of our business and provide security of supply for our customers. At the same time, we are relying on the support of our customers to help us conquer the challenges our business is facing.”

Iluna Group and Maglificio Ripa announce a strategic collaboration, each maintaining its own identity and independence, based on the complementarity of the proposal and the convergence of intentions for a new and more functional way of partnership.

Iluna Group, a leader in the production of smart lace, and Maglificio Ripa, internationally recognized for the production of premium and responsible jersey, both established in common sectors - from underwear to beachwear and sportswear - formally launched this collaboration during the MarediModa show in Cannes with a joint double stand where visitors could discover the latest collections of the two companies and also imagine new designs and solutions for sustainable fashion.

"We are living in a moment of strong change, from the wave of sustainability that is finally sweeping the fashion world to new market scenarios. And we are convinced that collaboration is the key to face these new challenges. In Maglificio Ripa we saw a complementary and unique partner with whom we can reach partners, customers and suppliers in a more complete way." comments Furio Annovazzi, CEO of Iluna Group. "Ours is not a union between companies but a new model of partnership, a sort of strategic symbiosis aimed at developing together new paths that can lead the both of us both to growth. Our collections, presented in the same context, can nurture the creativity of customers at a time when the stylistic contaminations are increasingly pronounced," adds Luca Bianco, CEO of Maglificio Ripa.
 
Furthermore, Iluna Group and Maglificio Ripa jointly created their new campaign with a photo shoot and video clip as well as jointly developed a trend scenario that allowed both companies to better embrace the evolving market by sharing information, perspectives and ideas.

The new claim “Crafted Elegance” embodies Bemberg™’s values of preciousness, uniqueness, quality and refined aesthetic blended with innovation and responsible values. In 2021 Bemberg™ celebrates nine decades of commitment to deliver true timeless beauty, style and touch thanks to its responsible innovation heritage and soul. And today it relaunches a new gender aesthetics that speaks about contemporary values of transparency, inclusivity and sustainability.
 
Bemberg™ is all about joyful comfort, premium values delivering an unparalleled wellbeing. It’s the one-of-a-kind material that offers design, beauty, innovation and responsibility all at once.

Its heritage talks about premium high-quality lining for formal and sportswear, but the contemporary and worldwide journeys and designers’ cooperation are talking about fashion, outerwear, innerwear dedicated to contemporary consumers.
 
Bemberg™ by Asahi Kasei is the brand name of the regenerated cellulose fiber made from the smart tech transformation of cotton linters - short downy fiber enfolding cotton seeds. It is pre-consumer materials obtained from manufacturing process of cotton oil that are converted through a traceable and transparent closed loop process, taking place in Nobeoka, Japan, the only plant producing Bemberg™ at worldwide level. So, the Bemberg™ DNA is really based on a circular economy approach.

Bemberg™ fiber is the key ingredient of some of the most cutting-edge design innovations on planet Fashion, proving to be a sustainable, responsible and innovative material.

The Bemberg™’s 90th anniversary signs also another important moment for the company. Mr. Koji Hamada is appointed as new CEO of Asahi Kasei Fibers Italia. Mr. Hamada has a strong connection to the Italian market having already spent more than 5 years in the Gallarate’s headquarter working in close contact with all partner of the territory.

After three-days of product sourcing and business networking, Techtextil India 2021 in Mumbai concluded in a strong and positive note. The trade fair emerged as a crucial meeting place for the technical textile players to rebuild their supplier links, promote industry integration and engage in lucrative knowledge exchange.

The eighth edition of Techtextil India stood out to be a ground-breaking business platform for the technical textile sector to build a new and strong foundation in the new normal. The aim of the new edition was to promote industry unification and business recovery across the value chain of technical textiles.

The event held at Bombay Exhibition Centre was inaugurated by major dignitaries, including Shri Ajit Chavan, Secretary – Textiles Committee, Ministry of Textiles, Government of India. Over the course of its three buzzing days, the show garnered an attendance of 4,087 visitors drawn by live demonstration of latest products, technologies and innovations exhibited by over 150 technical textile brands on the show floor.

The event received an overwhelming response, reflecting industry’s keen interest to explore new developments and opportunities in technical textiles. In regards to the same, Mr Abhijit Kulkarni, President – Textile Engineering Group, A.T.E. India, stated: “It was the first and best physical show also on hybrid mode filled with enthusiastic buyers and customers who visited our booth and had very fruitful discussions with us. Several leading textile manufacturers visited our stalls, including: Strata Geosystems India, SKAPS Industries, Reliance Composites, Paramount Textiles, and Welspun, to name a few.”

Alok Masterbatches Pvt Ltd, Khosla Profile Pvt Ltd, ATE Group, Lucky International, Meera Industries Limited, Park Non-Woven Pvt Ltd, Sarex Chemicals, SICAM, Suntech Geotextile Pvt Ltd and Weavetech Engineers, were among the leading Indian companies exhibiting at the show.

The significance of the three-day fair was further elevated by the German pavilion. Technical textile manufacturers from Germany, such as Autefa Solution Germany GmbH, DILO Systems GmbH, Emtec Electronic GmbH, Georg Sahm GmbH & Co, Karl Mayer Verwaltungsgesellschaft mbH, Merz Maschinenfabrik GmbH and Oerlikon Barmag Zweigniederlassung der Oerlikon Textile GmbH & Co, displayed their latest technologies on the show floor, which garnered significant attention from the Indian buyers.

The first Digital Symposium was another highlight of Techtextil India 2021. The forum delved into a series of crucial topics in technical textiles discussing PLI schemes, FDI opportunities and policies, investment opportunities in Tamil Nadu, & New Investment Opportunities, Sustainable Technical Textiles and Global sustainable approach for Textiles with Antimicrobial Performance.

Concluding on a successful note, Techtextil India 2021 emerged as a platform of new beginnings for the technical textiles sector and for businesses trying to retain their shape and seeking momentum after the tough pandemic phase.

Sateri’s Lyocell facility in Rizhao, Shandong Province, has been awarded the Sustainable Textile Production (STeP) certification for responsible production, making it the first Lyocell producer in China to be certified to the rigorous standards set by independent Swiss-based certification organisation OEKO-TEX®. Sateri’s Lyocell facility has also obtained the highest ranking of level three in the certification assessment scoring for exemplary implementation of best manufacturing practices.

Together with its earlier achievement of the STANDARD 100 by OEKO-TEX® certification that confirms its Lyocell fibre is free from any harmful substances and complies with European standards, Sateri’s lyocell products are qualified to carry the MADE IN GREEN by OEKO-TEX® product label. This label not only attests to Sateri’s Lyocell fibre as safe and manufactured in environmentally-friendly, socially responsible and safe facility, but also the Group’s commitment to higher levels of transparency and accountability through the product traceability feature of the label.

The STeP by OEKO-TEX® certification comprises three levels describing the extent to which a company has achieved sustainable production and working conditions of factories in the textile industry. The areas of assessment include chemicals management, environmental performance, environmental management, social responsibility, quality management, as well as occupational health and safety.

Sateri’s Lyocell fiber factory in Rizhao commenced operation in May 2020, with an annual output of 20,000 tonnes of Lyocell fiber. The same site houses a 5,000 tonne Lyocell pilot production line dedicated for the development of Lyocell application technology. In March 2021, the Group announced plans to expand its Lyocell annual production capacity in China up to 500,000 tonnes by 2025.

A natural and biodegradable fibre, Sateri’s Lyocell is made from wood pulp sourced from certified and sustainable plantations. It is manufactured using closed-loop technology, requiring minimal chemical input during the production process, and utilising an organic solvent that can be almost fully (99.7%) recovered and recycled.

Sateri’s Lyocell is used to produce high quality textiles and personal hygiene materials. Using a unique high technology manufacturing process, it has outstanding dry and wet strength, high uniformity and consistency, and superior quality. It blends well with various textile fibres to create different fabric styles and characteristics for wide downstream applications.

The Premium Group events will take place in Frankfurt am Main in the third week of January 2022, taking into account the 2G+ regulation (all participants have to be vaccinated, recovered and additionally daily tested).
 
On the basis of the current regulations of the federal government and the Hessian state government, which did not announce any further restrictions for vaccinated people last week, the fashion fairs PREMIUM and SEEK, the FASHIONTECH talks and the showcase of the new format THE GROUND will comply with the official health and hygiene regulations from 18th to January 20, 2022 in Frankfurt am Main.
 
This decision is based on the representative feedback from many protagonists of the industry, expert opinions and a close observation of the situation as well as an assessment of all measures that can be taken in Europe to ensure a safe event.

Four formats - one large exhibition hall
The conceptual novelty is that the PREMIUM, SEEK, THE GROUND and FASHIONTECH events will - for the first time and once - take place all together in a spacious hall, which roughly corresponds to the entire area of Station Berlin, on a total area of approx. 20,000 square meters. The resulting simplified admission management serves the safety of everyone. In this way, visitors can quickly and comfortably experience all the inspiration and concentrated brand power at once.

In addition to the security aspect, the merger of the two flagship events PREMIUM and SEEK in one large exhibition hall will bring new features, above all, in terms of content and atmosphere. Apart from an unprecedentedly strong brand portfolio, completely new synergies and energies will arise, which will make the meeting in January a unique momentum in the history of the industry.

Numerous brands have already signed-up and despite some decisions for smaller pop-up presentations, instead of large stands, the willingness to start again together and to want to send positive signals prevails! In addition to established players, many new brands also want to show their collections now.

THE GROUND - new generation, new platform
THE GROUND will give an outlook on what can be expected in summer with an exclusive press and influencer event. The Fashion Festival ‘for a young and purpose driven generation’ is an innovative platform for brands to get in direct contact with Gen Z with interactive installations, campaigns and storytelling.

At the preview event in January, 15 curated brands and key partners will present their value-based projects and products. In keynotes and panel talks, THE GROUND is dedicated to the topics most relevant to GEN Z: diversity, inclusion & sustainability.

FASHIONTECH - innovation, inspiration, content
FASHIONTECH is the content platform for fashion, technology and lifestyle. This is where decision-makers, industry insiders, communication experts and innovative minds meet to exchange experiences, discuss potential and developments, generate new leads and promote exchange between the various industries.

In addition to the core events, the Premium Group will also organize its popular evening events - due to the conditions, of course, to a slightly different extent than usual.

Koketa, a brand of premium womenswear based in Peru, has begun sampling leggings, undergarments and workout wear featuring Acteev® Protect fabric. Produced by U.S. manufacturer Ascend Performance Materials, Acteev incorporates the odor-fighting and mildew-destroying antimicrobial benefits of zinc ions embedded into the matrix of superior nylon yarns and fabrics.

“When it comes to what’s closest to your most vulnerable skin, being safe and sanitary is a top priority,” said Juan Daniel Del Carpio, commercial director for Koketa. “The Koketa woman wants beauty, comfort and protection, and a partnership with Acteev makes it easier than ever for us to deliver all three.”

Koketa garments with Acteev feature Koketa’s signature innovative styles, including unique knit patterns, on-trend colors and flattering silhouettes. The Acteev fabric is buttery-soft and breathable yet long-lasting and resistant to pilling.

Additionally, clothing made with Acteev is resistant to unwanted odors, keeping garments as fresh after 100 washes as they are on day one. The active ingredient – labeled safe by the U.S. Food and Drug Administration – targets the bacteria and microbes that can cause odor, mildew and discoloration.

“Zinc is nature’s safeguard,” said Juan Toro, global principal business development leader for Acteev in the Americas. “It is a mineral needed for human health, and we have harnessed its power to protect the garments in a natural, sustainable way.”

Huntsman Textile Effects has released the latest addition to the third generation of its revolutionary AVITERA® SE polyreactive dye range with the introduction of AVITERA® ROSE SE for brilliant bluish-red shades. The innovative new dye significantly outperforms the available dyeing technologies for cellulosic fibers and blends, delivering substantial water and energy savings, exceptional overall fastness, and reduced costs.

AVITERA® ROSE SE slashes the water and energy required for production by up to 50% thanks to its unique low-temperature and high-speed wash-off technology. It further delivers excellent right-first-time performance, with outstanding compatibility, levelling properties, and on-tone build-up. The cost-effective formulation reduces recipe costs for medium-dark shades while both minimizing processing costs and eliminating reprocessing. It also increases mill output by up to 25% or more.

Using AVITERA® ROSE SE, brands can stand out with brilliant bluish-red textile products in a broader shade gamut. The dyes offer very good light fastness levels for classic bluish trichromatic element, with exceptional overall fastness performance. Products dyed with AVITERA® ROSE SE have the highest chlorine resistance, tailormade for stringent Japanese and US laundering requirements, and are suitable for use with Huntsman’s HIGH IQ® Lasting Color Eco color-retention program. With minimal chance of cross-staining, they are ideal for red-white striped cotton knit fabric.

AVITERA® ROSE SE is fully compliant with the most stringent industry and brand-specific restricted substance lists. It is bluesign® approved and is suitable for STANDARD 100 by OEKO-TEX® certified textile products.

Launched by Huntsman Textile Effects in 2010, the first-generation AVITERA® SE dyes set the benchmark for sustainability in the textile industry. The second generation expanded the range’s color palette from the palest to the deepest and darkest shades. The third generation further enhances the economic sustainability of the AVITERA® range while delivering unrivalled environmental benefits, outstanding operational performance, and attractive textiles with exceptional overall fastness.

•  14 million for the Rhenish coal region

Shaping economic change in the Rhenish textile and coal region together with artificial intelligence (AI) - this is the goal of the WIRKsam competence centre launched at the beginning of November. The joint project, funded by the Federal Ministry of Education and Research, is researching innovative forms of work to secure employment, create attractive jobs and strengthen regional companies.
 

With a focus on the strengths of the Rhenish mining area, WIRKsam is to establish itself as a central point of contact and align various scientific institutions and their research specifically to the challenges of the regional working world. Funded by the BMBF with 14 million euros over five years, the project is fundamentally about transferring scientific findings into company practice and into the wider society. After the funding phase, the centre of excellence will continue to work independently.

Prospects: Attractive jobs in the lignite mining region
The region on the left bank of the Rhine is not only a lignite mining area, but also a historically grown textile region where technical textiles are produced today, for example for medical technology or plant and vehicle construction. This offers valuable future prospects for the employees affected by the lignite phase-out.

Against this background, the aim of the WIRKsam centre of excellence is to research the extensive possibilities of artificial intelligence for shaping the future world of work and to transfer them to companies. AI applications are used to develop innovative work and process flows to create attractive workplaces and increase the competitiveness of local companies.

Together: business and science
The special feature: research institutions and companies from the Rhenish textile industry and related sectors work together in the centre of excellence. Research partners are the Institut für Textiltechnik (ITA) of RWTH Aachen University and the Institute for Mobile Autonomous Systems and Cognitive Robotics (MASCOR) of FH Aachen University of Applied Sciences, headed by ifaa - Institut für angewandte Arbeitswissenschaft e.V. (Institute for Applied Work Science).

Nine regional companies are involved so far; more will join. AI applications are being developed and exemplarily implemented for their respective needs. In this way, the diverse potentials of AI for work design are being tested and qualification requirements derived. These results will not only increase the global competitiveness of the textile industry and other sectors; they will also secure jobs and make an important contribution to overcoming structural change in the Rhenish lignite mining area.

WIRKsam is funded by the Federal Ministry of Education and Research as part of the funding measure "Regional Competence Centres for Labour Research" and is supervised by the Karlsruhe Project Management Agency (PTKA) (funding code: 02L19C600). The WIRKsam competence centre will be based in Hürth, Germany, on the edge of the Rhenish mining area as soon as the conversion work on the former TV studios on the Euronova campus is completed.