From the Sector

Paper Converting Machine Company (PCMC) has announced its industry-leading wet wipes folding machines the Rx200 and Mako Clipper are now available with high-content alcohol, measuring as much as 70 percent.

Previously, PCMC wet wipes machines operated with less than 20 percent alcohol, producing disinfectant wipes for personal, home, industrial and automotive use. However, the COVID-19 pandemic has created a spike in demand for sanitizing wipes that contain at least 70 percent alcohol, the key component in killing or deactivating viruses.

To help manufacturers meet the increased demand, PCMC redesigned its Rx200 and Mako Clipper to safely operate with high-content alcohol. The new designs feature increased air exchange for better ventilation and additional sensors to eliminate the risk of flash points and fires. The machines also include IDS 150/300 integrated dual stackers and a redesigned Mako saw to meet more stringent regulations and higher machine performance expectations.

Swedish commission dyeing company 7H Färgeri is looking to propel itself to the forefront of sustainable fabric production with the installation of the first industrial scale imogo Dye-Max spray dyeing line.
Currently under construction, the line will be delivered in the first week of March to the 7H plant close to the Swedish city of Borås. It will have a full working width of 1.8 metres with an operating speed of up to 50 metres for the reactive dyeing of cellulosic fibre-based fabrics. In addition, it will be capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing the company with unbeatable flexibility in production.

A proven Mini-Max laboratory unit for pre-determining application volumes and colour matching will also be delivered as part of the contract.

With the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems, the DyeMax has gained considerable attention since the concept was outlined and a prototype machine constructed in 2019.

Pilot scale trials have subsequently been carried out with many well-known international textile companies and their brand partners.
The application unit of the Dye-Max consists of a closed chamber containing a series of spray cassettes with precision nozzles for accurate and consistent coverage, in combination with the patented imogo Pro Speed valve that controls the volume to be applied.

Control and precision
“We are achieving an extremely low liquor ratio of around 0.5-1 litres per kilo of fabric and we fully control the pickup, applying precisely what is required to the specific fabric,” says imogo founding partner Per Stenflo. “Compared to traditional padders there is no contamination of the dyebath or dilution of the dye liquor to worry about.
Fast changeovers with virtually no waste together with a high production speed enable a high productivity and unmatched production flexibility. The system is also equipped with an exhaust system and droplet separator to ensure that the environment around the unit is safe and free from particles.

The imogo Mini-Max meanwhile frees up valuable production time by avoiding wasteful pre-runs. The user simply sets the recipe with the Mini-Max and transfers the parameters to the Dye-Max recipe database for the system to be fully production ready.

7H Färgeri was founded in 1935 and has established itself as the Nordic region’s most complete dyeing and processing plant, specialising in technical and functional textiles for the automotive and soft furnishings sectors, as well as functional and protective clothing.

The family-owned business is now run by brothers Johan and Peter Engelmann.
“We are pleased to be pioneering a sustainable first for the dyeing industry,” said Johan Engelmann. “Our goal is to offer the market products and services with the highest quality in the most climate-smart and sustainable way, and imogo’s spray technology will give us the opportunity to offer innovative new services and products to both existing and new customers. It will be a very exciting journey.”

World Congress on Textile Coating
On February 12th Per Stenflo will make a presentation entitled ‘Transforming Textile Dyeing’ during the online World Congress on Textile Coating which is held over four days, between February 11th and 19th.

International technology Group ANDRITZ has received an order from Lotus Teknik A.Ş., Turkey, to supply a neXline wetlace CP (carded pulp) line for the production of biodegradable, plastic-free wet wipes. Lotus Teknik A.Ş. is a leading nonwoven roll good producer and a member of the Sapro group. Sapro is based in Istanbul, Turkey, and is one of the top three producers of wet wipes globally.  

The neXline wetlace CP line is equipped with state-of-the-art stock preparation equipment, including approach flow and fan pump, opening and blending, TT card, wetlaid forming unit for pulp application, a hydroentanglement system, filtration unit, dewatering, and through-air drying. All components are perfectly designed to produce a first-class biodegradable wipe. The line is scheduled for start-up by the end of 2021.

ANDRITZ developed the new neXline wetlace CP line in order to serve the new market trend of sustainable wipes. Lotus Teknik supported the development from a roll goods producer and converter perspective. The partnership follows the successful installation of an ANDRITZ high-capacity spunlace line some years ago. The Wetlace CP new generation of production technology for biodegradable wipes has resulted from ANDRITZ’s extensive knowledge and considerable history of providing technologies for wood-based industries, spunlace and wetlaid roll goods, and the strong collaboration with Lotus Teknik.

Archroma, a global leader in specialty chemicals towards sustainable solutions, has been recently ranked number 1 in the “industrial chemicals” list published by the Institute of Public & Environmental Affairs (IPE) for driving transparency in their supply chain.

Archroma also entered the Top 50 of companies in IPE’s Green Supply Chain CITI Evaluation, at the 47th position. The evaluation dynamically assesses brands on the environmental management of their supply chains in China.

With a wide array of products used every day, everywhere, the company is committed to operate along the principles of “The Archroma Way to a Sustainable World: Safe, efficient, enhanced, it’s our nature”. The Archroma team is therefore committed to sourcing safe and sustainable raw materials and intermediates from like-minded partners.

Heike van de Kerkhof, CEO of Archroma, recently delivered a message at the IPE 2020 Green Supply Chain Forum online, and commented: “As industry leader, we have the responsibility to keep on addressing the climate challenge, and to do everything we can together to reduce our impact on the environment. This is where the approach of the Institute of Public & Environmental Affairs supports us. They encourage us to challenge our suppliers in terms of safety, health and environment, and to go even beyond our own strict policies and processes.”

Neumünster – Success is built by connecting the right people with the right product. In a global marketplace, this means collaboration is just as important as competition. Companies need to focus on their strengths, while finding practical ways to innovate and expand upon their capabilities.

An exclusive license from Procter & Gamble offers the best for nonwovens

In order to do so, working together often makes the most sense. This is what motivated Procter & Gamble and Oerlikon Nonwoven – Teknoweb Materials to agree on an exclusive license agreement to market and sell the Phantom platform worldwide.

The patented process for hybrid nonwovens combines the best of both airlaid and spunmelt technologies to deliver new, flexible ways of creating wet and dry wipes. Phantom technology offers additional benefits by reducing resources and cost, while increasing overall performance. The exclusive license gives Oerlikon Nonwoven – Teknoweb Materials distribute this technology worldwide. In addition, Oerlikon Nonwoven – Teknoweb Materials have further refined the process into their own Levra technology – an entry-level option which offers tailored production volumes with lower investment costs but is still suitable to be upgraded to the premium Phantom model in the future.

Quality products that cost less

Essentially, Phantom technology was developed to produce hybrid substrates. The spunmelt and airlaid processes are merged into one step to combine cellulose fibers, long fibers such as cotton, or even powders with polymer fibers in unprecedented ways. This technology has clear advantages in terms of resources, performance, and cost compared to the previous processes on the market. By removing hydroentanglement, it is no longer necessary to dry the material. Adjusting the process can optimize relevant product characteristics such as softness, strength, dirt absorption, and liquid absorption. In the end, this even increases the quality of the product itself.

The greater freedom for formulating continuous and discrete fibers allows for more flexible and absorbent structures and highly textured materials. Wipes feel softer to the touch while providing more protection for the hands. Up to 90% of the material can consist of pulp fibers, although natural alternatives like cotton or synthetic fibers can be added to the mix.

Phantom technology has not only found a practical application in a variety of wipes – such as hygiene wipes, anti-bacterial wipes, surgical wipes, or industrial wipes – but also in absorbent cores, for instance indiapers or fempro products. With so many applications, Oerlikon Nonwoven – Teknoweb Materials are fully prepared to deliver Procter & Gamble’s innovative Phantom technology to the global nonwovens market.

On Thursday, September 24, the Lenzing Group, a leading manufacturer of wood-based cellulose specialty fibers, and Hof University opened a new Nonwoven Development Center (VEZ). As a strategic partner, Lenzing has access to a state-of-the-art development line at the campus in Münchberg with immediate effect. This offers new opportunities for sustainable fiber and nonwoven innovations for a wide range of applications including hygiene, body care and medical.

In line with the sCore TEN corporate strategy, the Lenzing Group is focusing on sustainable innovations, which are agreed in an optimum manner to the needs of the value chain. „We offer our customers and partners a decisive competitive advantage: agility. The pilot plant in the VEZ allows the resource-efficient development of fiber and nonwoven innovations on a small scale”, Jürgen Eizinger, Vice President Business Unit Nonwovens at Lenzing, explains.

The VEZ was completed according to schedule in September 2020, after Lenzing and the University of Hof signed a cooperation agreement for its use in 2019. The timing is perfect. Developments at political level, such as the directive (EU) 2019/904 of the European Parliament and of the Council of 5 June 2019 on the reduction of the impact of certain plastic products on the environment, increase demand for responsibly manufactured nonwovens. The so-called Single-Use Plastics Directive aims at building awareness and greater transparency with regard to wet wipes and feminine hygiene products.

With its VEOCEL™ branded wood-based cellulose fibers, Lenzing has been laying the foundation for many years for sustainable nonwoven applications and will test and develop innovative ideas using the new possibilities offered by the VEZ. „We are noticing increasing interest in sustainable concepts from biodegradable cellulose fibers“, Jürgen Eizinger sums up the market development of the last months and adds: „We are aware that the fibers used have an enormous influence on the final product. For this reason our commitment goes beyond fiber production.“

With the spunlace pilot plant at the VEZ, Lenzing will support customers and partners more intensively in the development of new nonwoven applications and at the same time promote cooperation in the field of marketing. In the previous year, the company already established new certification standards for the VEOCEL™ brand. Since then certified manufacturers can only use the VEOCEL™ logo with blends of biodegradable cellulose fibers. With this measure, the VEOCEL™ brand allows consumers to make a more conscious product selection.

With its #ItsInOurHands environmental initiative, the VEOCEL™ brand also actively contributes to creating awareness. More detailed information can be obtained on itsinourhands.com.

• Protective masks, everyday masks, disinfecting wipes and surgical gowns are goods in demand in times of corona.
• In their manufacture, textile machines are at the beginning of the production chain.

The production of the textile raw material is the first step of the usually multi-stage production processes. Members of the VDMA Textile Machinery Association are at the beginning of this technological chain.

The production of protective masks starts with the manufacture of the filter material, which for surgical masks as well as FFP2 and FFP3 respirator masks consists of fine-pored nonwoven fabric to intercept coronaviruses. In addition to the systems, machines and components used for this purpose, measurement and control technology ensures the highest quality of important parameters such as basis weight and air permeability. Nonwovens used for respiratory masks have to meet the same high-quality requirements as the masks – to ensure the protection of the mask wearer.

Members of the VDMA Textile Machinery Association have reacted to the new market requirements in a very short time and developed new technologies for knitted, warp knitted as well as woven mouth and nose masks that can be produced without the need for sewing. For surgical masks, FFP2 respirators and social distancing masks, a wide variety of other materials and combinations of materials are used (nonwovens, woven fabrics, knitted or warp knitted fabrics and laminates thereof). Elastic bands are required to wear the masks and several association members provide technologies for their production.

Materials for masks can be treated with textile chemicals to make them antiviral and antibacterial. For this purpose, the VDMA member companies offer application systems which apply the corresponding chemicals to fabric webs. As already mentioned, quality assurance is extremely important for medical products. For this purpose, member companies of the VDMA offer software systems with which each mask can be traced through the entire production process.

VDMA members also offer solutions for the assembly of respirator masks, some of which were developed at short notice. These solutions enable respirators to be produced that meet the relevant standards and the highest quality requirements of customers and market surveillance. This applies to systems for the production of surgical masks and FFP respirators. At the end of the production chain, machines are used to pack masks in single or multiple packs.

In pandemic times, the demand for protective gowns (so-called surgical gowns) also increases. The same applies to disinfecting wipes. For these textile products, too, VDMA members manufacture tailor-made machines for production through to packaging. The quality of the products is ensured by means of measurement and control technology.

In the wake of the corona crisis, VDMA Textile Machinery has launched a new series of web events called "Textile Machinery Webtalk". Here, experts from up to four VDMA member companies present their innovative technologies on a specific topic in a maximum of 90 minutes and are available to answer questions from participants. The presentations are held in English. Participation in the web events is free of charge.
Topics of the first two webtalks were:
"Technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks)."
"Technologies for the production of respiratory protection masks (FFP masks and surgical masks)."

The format is well received. Around 180 people from more than 30 countries took part in the first two webtalks. With this format, the VDMA reaches both textile and nonwovens manufacturers who already manufacture these products and companies that want to invest in new business areas.

The next webtalk will take place on 23 July 2020 from 14.00 to 16.00 (CEST) on the current topic "Technology solutions to produce fully-fashioned community face masks." Experts from KARL MAYER, STOLL by KARL MAYER and Jakob Müller will be presenting their technologies for producing everyday textile masks to an international expert audience. Interested parties can register here.

• Australian production of medical masks to commence from April 2021 with Oerlikon Nonwoven meltblown technology

Neumünster/Germany, Brisbane/Queensland/Australia – Queensland company OZ Health Plus will establish Australia’s first manufacturing plant to make the critical fine plastic material used in most protective face masks. OZ Health Plus has purchased a plant of the Swiss-based technology company Oerlikon to establish a Queensland-based production plant for spun-bond and meltblown nonwovens. These fabrics are essential for Australia’s face mask manufac-turers, who currently produce about 500 million medical and industrial masks per year. However the fabrics have to be imported from overseas and access to these materials has been severely disrupted during the COVID-19 pandemic.

Oerlikon’s German-based business unit Oerlikon Nonwoven has now executed legal and commercial arrangements to supply the specialised machinery which can manufacture the nonwoven material lo-cally. The same machinery is used to make almost all face masks material manufactured in Europe. The world-leading Oerlikon Nonwoven meltblown plant will commence operations in April next year, with a second stage planned for late 2021.

The Oerlikon Nonwoven plant can produce meltblown fabrics for 500 million masks per year, along with other medical and non-medical grade products, filtration products, sanitary items, antiseptic wipes and more. Rainer Straub, Head of Oerlikon Nonwoven said: “We are very proud that we can now for the first time supply our Oerlikon Nonwoven meltblown technology to Australia. Due to the short delivery time, we hope to make our contribution to the Australian population and their safe sup-ply of high-quality protective masks as soon as possible.”

Queensland company secures manufacturing plant for the only Australian production of critical face mask material

OZ Health Plus director Darren Fooks said: “Australia has access to raw polypropylene feedstock but lacks the plant to convert that raw material to specialised spunbond and meltblown fabrics. These fabrics are essential for local mask manufacturing. The Australian-based Oerlikon Nonwoven plant will fill the production chain gap for Australia by producing the fabrics we need for mask production and many other products – it will reduce Australia’s protective mask supply chain from thousands of kilo-metres, to tens of kilometres.”

“Our decision in favor of Oerlikon Nonwoven was a given once we had analyzed the material samples. It was a matter of course for us that the Business Unit of the Oerlikon Manmade Fibers segment could supply high-quality machines and systems”, added Darren Fooks.

OZ Health Plus’ new facilities will take up 15,000 m2 of manufacturing space and will employ 100 full-time roles once the second stage of the project is complete. OZ Health Plus continues to work with both Queensland and Federal Government stakeholders and values their support in bringing this vital capability to Queensland.

Leading meltblown technology

Oerlikon Nonwoven meltblown technology, which can also be used to produce nonwovens for protec-tive masks, is recognized in the market as the technically most efficient method of producing high-separation filter media from plastic fibers. Most of the protective mask capacities available in Europe to date are produced on Oerlikon Nonwoven equipment.

Textile and nonwoven associations issued a joint statement today urging federal, state and local governments to deem textile and nonwoven manufacturing facilities as “essential” when drafting “Shelter in Place” orders in response to the COVID-19 crisis.

Our associations recognize the serious challenges our elected officials, health administrators, and others are facing when issuing orders to protect communities across the country and we understand the necessity for leaders to enforce a ‘Shelter in Place” order or quarantine orders.

Our members make a broad range of inputs and finished products used in an array of personal protective equipment (PPE) and medical nonwoven/textile supplies, including surgical gowns, face masks, antibacterial wipes, lab coats, blood pressure cuffs, cotton swabs and hazmat suits. These items are vital to the government’s effort to ramp up emergency production of these critical supplies.

If workers who produce these goods are not granted an “essential” exemption from “Shelter in Place” and other quarantine orders to go to their manufacturing and distribution facilities, it will cause major disruptions in the availability of these goods. This will create significant hardship to healthcare providers and consumers across the country who depend on steady and stable supplies of these critical items.

We are asking the administration and state and local authorities to provide greater certainty and clarity for our companies and employees and ask for a clear exclusion of our manufacturing operations from “Shelter in Place” orders as the textile and nonwoven products that we make in the U.S. play an essential role in mitigating the shortages of critical supplies. Such a designation will help us avoid disruptions of vital goods and services during this challenging time.

Non-contact precision spray technology enhances productivity, sustainability and process control

Baldwin Technology Company Inc. has announced that it will showcase the TexCoat G4 non-contact precision spray fabric finishing system at the Techtextil North America tradeshow, held from May 12 to 14, 2020, in Atlanta (booth #3048).

With extensive sustainability benefits, unprecedented tracking and process control, and industry 4.0 integration, the TexCoat G4 provides consistently high-quality fabric finishing, with no chemistry waste, as well as minimal water and energy consumption. 

Baldwin’s innovative non-contact spray technology eliminates chemistry dilution in wet-on-wet processes. The TexCoat G4 consistently and uniformly sprays chemistry across the fabric surface and applies it only where needed, on one or both sides of the fabric. Customers can expect no bath contamination during the finishing process, as well as minimal downtime during changeovers, which are made easy with recipe management that includes automated chemistry and coverage selection.

The TexCoat G4 also enhances sustainability by wasting no chemistry during color, fabric or chemistry changeovers, and because only the required chemistry volume is applied to the fabric, wet pick-up levels can be reduced by up to 50 percent—leading to 50 percent less water and energy consumption. Furthermore, in single-side applications, drying steps can be eliminated for various textiles, including those that are back-coated and laminated, thereby streamlining and simplifying the production process.