From the Sector

Fashion for Good launched the Mass Balance Demonstrator project, a collaborative industry initiative to implement and scale the mass balance attribution (MBA) chain-of-custody model for biomass-attributed PET in textile applications. The project represents a concrete step toward accelerating brand-driven decarbonisation across the apparel value chain.

While the portfolio of both preferred existing and next-generation materials offers opportunities for decarbonising the apparel industry, biosynthetics currently represent only a small fraction in material projections for 2030. The reality is that the dedicated commercial scale infrastructure required for biosynthetic materials is not yet fully developed, keeping production volumes prohibitively low and costs too high for widespread industry transition, despite their validated technical performance.

Borrowed from industries such as renewable energy and sustainable wood and paper, the mass balance attribution is a chain-of-custody model which allows renewable and fossil-based feedstocks to be physically mixed. It tracks how much renewable input entered the system and proportionally allocates that amount to the outputs, verified through audits and certification bodies. 

HOW DOES MASS BALANCE ATTRIBUTION (MBA) WORK
A chemical manufacturer introduces renewable feedstocks (such as agricultural residues or used cooking oil) into a production system that also processes fossil-based feedstocks. These feedstocks move through the same infrastructure and chemical processes, and by the time they become resin, they are chemically indistinguishable. The amount of renewable feedstock entering the system is carefully measured and recorded through a verified accounting system, creating a record of renewable input while accounting for process losses and conversion factors.

That accounted input is then allocated to specific products using mass balance principles. If 30% of the feedstock entering the system is renewable, a corresponding share of the output can carry a renewable attribution. In this project, this will be the biomass-attributed polyester (PET) but it could also be used for other fibres such as nylon. This does not necessarily mean each product physically contains renewable content; rather, the claim reflects the share of renewable input assigned to that product. Crucially, the system is strictly controlled: producers cannot allocate more renewable attribution than the amount of renewable feedstock entering the system, and once attributed, those certified attributes cannot be counted again elsewhere.

“We are at a point where the industry wants to move and adopt biosynthetics, but the production frameworks and commercial infrastructure haven’t caught up. The Mass Balance Demonstrator project is about closing that gap: building the impact and commercial evidence, the blueprint, and the feedback loops that will allow the MBA model to scale with integrity.” Katrin Ley, Managing Director at Fashion for Good. 

THE GOALS OF THE PROJECT
The Mass Balance Demonstrator project, an initiative led by Fashion for Good, brings together BESTSELLER, Beyond Yoga (Levi Strauss & Co.), ON, Paradise Textiles, Environmental Resources Management (ERM), Indorama Ventures, ISCC, UPM Biochemicals, and Textile Exchange. The consortium is designed not only to demonstrate what is possible today, but to generate insights that the wider industry can build on now and in the future.

“Polyester is our second biggest fiber by volume in BESTSELLER, which means we are continuously investigating improvements in this category. By taking part in this project we as a company are building experience within mass balance attribution and bio-attributed polyester. Hopefully, as we collaborate with other great partners, this can initiate pathways that can support scaling of renewable feedstocks (or inputs) going forward.” Anders Schorling Overgård, Material Research Lead at BESTSELLER

At its core, the project adopts and implements the mass balance attribution chain-of-custody model to enable the production of biomass-attributed PET for textile applications, demonstrating that existing manufacturing systems can integrate renewable feedstocks today. The project is structured around four interconnected objectives:

• Producing biomass-attributed materials: the project will physically produce biomass-attributed resin and yarns, generating real-world output that matches performance parity.
• Quantifying the climate impact: a comprehensive cradle-to-grave greenhouse gas (GHG) emissions model will be developed for the produced materials, delivering science-based insights into their decarbonisation potential and overall environmental footprint.
• Developing a blueprint for industry scale-up: the project will deliver a practical roadmap for scaling biomass-attributed PET in the apparel sector, identifying key supply chain actors, assessing lifecycle accounting approaches for different chain-of-custody models, and evaluating the techno-economic feasibility of market deployment.
• Informing climate frameworks and industry standards: insights from the project will be shared with climate initiatives and standard-setting bodies to help credible guidance on mass balance attribution.

Microplastics are now found almost everywhere, even in remote regions of Antarctica. They enter the human body through the food chain. Studies indicate that microplastics may have negative effects on the human health.

One important source of microplastic pollution is the washing of textiles made from synthetic fibers. During washing, significant amounts of microplastics are released into wastewater and then enter aquatic ecosystems. To address this problem, the German Institutes of Textile and Fiber Research Denkendorf (DITF) have developed a textile-based cascade filter system.

The amount of microfibers released per wash cycle and per kilogram of textiles is estimated to range from 12 and 1,400 milligrams. Wastewater treatment plants are already able to remove a large portion of microplastic particles from wastewater, with removal rates of up to 99 percent. However, because of the high volume of wastewater discharged every day, these plants can still contribute significantly to microplastic pollution in the environment.

To date, various mechanical and chemical technologies have been used in wastewater treatment. Filter cascades, on the other hand, have mainly been applied for the analysis and characterization of microplastic particles. In their study, the DITF researchers demonstrated that specialized textile-based filter cascades are also capable of effectively removing microplastics from rinse water in industrial laundries. This is possible even at low water pressure. In addition, the system has a simplified design and requires little maintenance.

The cascade microfilter developed by the Denkendorf research team consists of three filtration stages. Each stage uses a three-dimensional textile sandwich composite made of polypropylene fabric and a 3D spacer knit. The stages have progressively smaller pore sizes, allowing the removal of microplastic particles down to 1.5 μm.

A compressed-air backwashing system is integrated to clean the filter and restore its performance. Because the filter cake moves from the fabric to the spacer layer, backwashing is needed less often, and the operating time can be increased by up to 155 percent.

Field trials at an industrial laundry and a municipal wastewater treatment plant confirmed a separation efficiency of 89.7 percent and 98.5 percent for the microfilter cascade. It can thus make a significant contribution to reducing microplastic pollution.

The high microplastic separation efficiency and the long service life of the filter medium make the system a promising solution for wastewater treatment. It is cost-effective, space-saving, and can be adapted to different applications and scales.

The textile composite medium developed at the DITF can be tailored to meet a variety of filtration requirements beyond its application in microplastic filtration.

SNUGGLE LTD became a Sedex member in February 2024 and recently undertook their first independent SMETA audit, joining a world-leading organisation in their latest commitment to supply chain sustainability. Sedex is a global technology company that specialises in data, insights and professional services to empower supply chain sustainability.
 
SNUGGLE LTD is dedicated to being a responsible business, managing their operations and supply chain in a way that safeguards workers, communities and the environment. Serving the apparel, textile and fashion industry, the company helps brands move at the speed of trend while reducing waste, risk and unnecessary inventory. Its digital garment decoration and agile production model enables rapid customization, short runs and scalable fulfillment with premium quality at every stage.
 
Sedex’s technology and services help companies such as SNUGGLE LTD to source more sustainably. The platform and solutions provided empower businesses with the practical tools, data analysis and insights needed to drive more socially and environmentally responsible practices in their both own operations and with suppliers.
 
SNUGGLE LTD will use Sedex technology and data tools to map the supply chain in more detail, keep live risk assessment audits and better understand of continuous working conditions which drive positive impacts for employees and our customers.

INDA, the Association of the Nonwoven Fabrics Industry, announced the winners of its inaugural Legislative Champion and Industry Advocate of the Year Awards, recognizing policymakers and industry members for their support of the nonwovens industry’s advocacy agenda.

Legislative champion award winners were Senator Jeff Merkley (D-OR) and Congresswoman Lisa McClain (R-MI), recognized for their support of the WIPPES Act, which would enact national Do Not Flush labeling standards for non-flushable wipes. Senator Merkley accepted his award in person at INDA’s third annual Washington D.C. Fly-In and Advocacy Summit, held in conjunction with ISSA, the Worldwide Cleaning Association’s Clean Advocacy Summit.

Senator Merkley was able to share the news with the group that the WIPPES Act, S. 1092, had been passed by the United States Senate the day prior with unanimous consent.

Industry Advocate of the Year awards were given to Martyn Davis, President of Sellars Nonwovens, and Sam Nebel, co-founder of Goodwipes, in recognition for their support of the nonwoven industry and INDA’s wipes advocacy.

“INDA would like to extend a heartfelt thanks and congratulations to all awardees,” noted INDA government affairs director Wes Fisher, “It was a great moment for Senator Merkley to join us in person to share the news of the Senate passage of the WIPPES Act, he and Representative McClain have been instrumental in moving this key legislation. Additionally, we would like to thank and recognize Sam and Martyn for their steadfast support of the nonwovens industry’s advocacy agenda.”