Textination Newsline

"Packaging made from bio-based plastics has long been established. We are now supporting the further development of these materials for new areas of application. If in the future the market also offers plant-based materials for technically demanding tasks such as vehicle construction, the bioeconomy will take a decisive step forward," explained Uwe Feiler, Parliamentary State Secretary at the Federal Ministry of Food and Agriculture, in Potsdam. The occasion was the handover of a grant to the Fraunhofer Institute for Applied Polymer Research IAP. The Fraunhofer IAP wants to develop a composite material that consists entirely of bio-based polylactic acid (PLA) and is significantly easier to recycle than conventional fiber composites.

The German Federal Ministry of Food and Agriculture (BMEL) is intensively promoting the development of biomaterials as part of its Renewable Resources funding program. More than 100 projects are currently underway, covering a wide range of topics: from plastics that are degradable in the sea to natural fiber-reinforced lightweight components for the automotive sector. The projects are supported by the Agency for Renewable Resources, the BMEL project management agency responsible for the Renewable Resources funding program.

Easier recycling of fiber-reinforced plastics
PLA is one of the particularly promising bio-based materials. The global market for this polymer is growing by around 10 percent a year. PLA is also used, among other things, as a matrix in fiber-reinforced plastics. In these mechanically resilient plastics, reinforcing fibers are embedded in a plastic matrix.

The Fraunhofer IAP project is now focusing on these reinforcing fibers: "We are further developing our PLA fibers in order to transfer them to industrial scale together with partners from industry. These fibers are ideally suited for reinforcing PLA plastics. The resulting self-reinforcing single-component composite promises great recycling benefits. Since the fiber and the matrix of PLA are chemically identical, complex separation steps are not necessary," explains Dr. André Lehmann, expert for fiber technology at Fraunhofer IAP.

Novel PLA fibers and films are more thermally stable
The challenge with this approach is that conventional PLA has a relatively low temperature resistance. Technical fibers can be produced most economically using the melt spinning process. The Fraunhofer IAP team is now using more thermally stable stereocomplex PLA (sc-PLA) for the fibers. The term stereocomplex refers to a special crystal structure that the PLA molecules can form. Sc-PLA fibers have a melting point that is 40 - 50 °C higher and can therefore withstand the incorporation process in a matrix made of conventional PLA. In the project, the researchers are developing and optimizing a melt spinning process for sc-PLA filament yarns. The partner in this work package is Trevira GmbH, a manufacturer of technical and textile fiber and filament yarn specialties that are in demand from automotive suppliers and contract furnishers, among others. Furthermore, the development of a manufacturing process for sc-PLA reinforced flat films is planned. The international adhesive tape manufacturer tesa SE is participating in this task, and will test the suitability of sc-PLA films as adhesive foils. In a third work package, the Fraunhofer IAP will finally process the filaments in a double pultrusion process to produce granules suitable for injection molding.

Bio-based solutions for the automotive and textile industries
The scientists led by Dr. André Lehmann are certain that the self-reinforced PLA material can conquer many new areas of application. The automotive and textile industries are already showing interest in bio-based materials that are also easier to recycle. In terms of price, PLA would already be competitive here, and now the material is also to be made technically fit for the new tasks.

Professor Alexander Böker, head of Fraunhofer IAP, says: "The steadily growing demand from industry for sustainable solutions underlines how important it is to develop biobased and at the same time high-performance materials. With our research, we are also actively driving the development of a sustainable and functioning circular economy and therefore very much welcome the support from the federal government."

Information on the project is available at fnr.de under the funding code 2220NR297X.

The Fraunhofer Institute for Biomedical Engineering IBMT, with its long-term expertise in nanotoxicity and nanosafety testing, contributes to a new EC project for water saving solutions for textile industry. This industry uses a vast amount of water for different steps in the textile dyeing process. It also produces a lot of wastewater, which contains a range of chemicals and dyes.

Breakthrough innovations are needed in energy intensive industries to recycle water and create closed loops in industrial processes. 20% of global industrial water pollution comes from textile manufacturing. To reduce the high amount of freshwater used in textile industry, the EC-funded Waste2Fresh project will develop a closed-loop process for textile manufacturing factories in which wastewater is collected, recycled and used again. Novel and innovative catalytic degradation approaches with highly selective separation and extraction techniques will be developed, based on nanotechnology. According to the European Commission, such “closed loops“ would significantly reduce the use of fresh water and improve water availability in the relevant EU water catchment areas, as outlined in the Water Framework Directive.

Closed loop recycling system for wastewater from textile manufacturers
Waste2Fresh meets the above challenges and industry needs by developing and demonstrating (to TRL 7) a closed loop recycling system for wastewater from textile manufacturing factories; to counteract freshwater resource scarcities and water pollution challenges exacerbated by energy intensive industries which are major users of fresh water (for e.g., processing, washing, heating, cooling).

The Waste2Fresh technology is developed to reduce current use of freshwater resources and considerably increases the recovery of water, energy and other resources (organics, salts and heavy metals). The result is a 30% increase in resource and water efficiency compared to the state-of-the-art. The system will ultimately lead to considerable environmental improvements and accordingly reduce the EC and global environmental footprint.

Fraunhofer IBMT expertise in human-toxicity and -safety testing
The Fraunhofer Institute for Biomedical Engineering IBMT will be primarily responsible for performing nanotoxicity and nanosafety testing during the whole technology process (from development to demonstration), ensuring that the developed system and processes meet relevant safety regulations. The Fraunhofer IBMT collaborates with all consortium partners developing and using to develop approaches for ensuring that the developed nanomaterial-based components meet relevant health and safety standards during their use.

For the hazard assessment of the developed nanomaterials, the Fraunhofer IBMT will perform a set of in vitro toxicity studies using commercially available human cell lines. The results of this toxicity studies will be the basis for the development of relevant safety procedures for handling and using the developed recycling technology.

 

Project funding: H2020-EU.2.1.5.3. - Sustainable, resource-efficient and low-carbon technologies in energy-intensive process industries

Duration: 12/2020- 11/2023

Coordinator:
KONYA TEKNIK UNIVERSITESI, Turkey

Project partners:
CENTRE FOR PROCESS INNOVATION LIMITED LBG, United Kingdom
ERAK GIYIM SANAYI VE TICARET ANONIM SIRKETI, Turkey
FRAUNHOFER GESELLSCHAFT ZUR FOERDERUNG DER ANGEWANDTEN FORSCHUNG E.V., Fraunhofer-Institut für Biomedizinische Technik IBMT, Germany
INNOVATION IN RESEARCH & ENGINEERING SOLUTIONS, Belgium
INSTYTUT MOLEKULYARNOI BIOLOGII I GENETYKY NAN UKRAINY, Ukraine
L'UREDERRA, FUNDACION PARA EL DESARROLLO TECNOLOGICO Y SOCIAL, Spain
NANOFIQUE LIMITED, United Kingdom
NANOGENTECH LTD, United Kingdom
PCI MEMBRANES SPOLKA Z OGRANICZONA ODPOWIEDZIALNOSCIA, Poland
STIFTELSE CSDI WATERTECH, Norway
THE OPEN UNIVERSITY, United Kingdom
ULUDAG CEVRE TEKNOLOJILERI ARGE MERKEZI SANAYI VE TICARET LIMITED SIRKETI, Turkey
UNIVERSIDAD INDUSTRIAL DE SANTANDER, Colombia
UNIVERSITA DEGLI STUDI DI TRENTO, Italy
VEREALA GMBH, Switzerland
VSI SOCIALINES INOVACIJOS SVARESNEI APLINKAI, Lithiani

• The “Bioconcept-Car” moves ahead

In automobile racing, lightweight bodies made from plastic and carbon fibers have been standard for many years because they enable drivers to reach the finish line more quickly. In the future, lightweight-construction solutions could help reduce the energy consumption and emissions of everyday vehicles. The catch is that the production of carbon fibers is not only expensive but also consumes considerable amounts of energy and petroleum. In collaboration with Porsche Motorsport and Four Motors, researchers at the Fraunhofer WKI have succeeded in replacing the carbon fibers in a car door with natural fibers. This is already being installed in small series at Porsche. The project team is now taking the next step: Together with HOBUM Oleochemicals, they want to maximize the proportion of renewable raw materials in the door and other body parts - using bio-based plastics and paints.

Carbon fibers reinforce plastics and therefore provide lightweight components with the necessary stability. Mass-produced natural fibers are not only more cost-effective but can also be produced in a considerably more sustainable manner. For the “Bioconcept-Car” pilot vehicle, researchers at the Fraunhofer WKI have developed body parts with 100 percent natural fibers as reinforcing components.

“We utilize natural fibers, such as those made from hemp, flax or jute. Whilst natural fibers exhibit lower stiffnesses and strengths compared to carbon fibers, the values achieved are nonetheless sufficient for many applications,” explained Ole Hansen, Project Manager at the Fraunhofer WKI. Due to their naturally grown structure, natural fibers dampen sound and vibrations more effectively. Their lesser tendency to splinter can help to reduce the risk of injury in the event of an accident. Furthermore, they do not cause skin irritation during processing.

The bio-based composites were successfully tested by the Four Motors racing team in the “Bioconcept-Car” on the racetrack under extreme conditions. Porsche has actually been using natural fiber-reinforced plastics in a small series of the Cayman GT4 Clubsport since 2019. During production, the researchers at the Fraunhofer WKI also conducted an initial ecological assessment based on material and energy data. “We were able to determine that the utilized natural-fiber fabric has a better environmental profile in its production, including the upstream chains, than the fabric made from carbon. Thermal recycling after the end of its service life should also be possible without any problems,” confirmed Ole Hansen.

In the next project phase of the "Bioconcept-Car", the researchers at the Fraunhofer WKI, in collaboration with the cooperation partners HOBUM Oleochemicals GmbH, Porsche Motorsport and Four Motors, will develop a vehicle door with a biogenic content of 85 percent in the overall composite consisting of fibers and resin. They intend to achieve this by, amongst other things, utilizing bio-based resin-hardener blends as well as bio-based paint systems. The practicality of the door - and possibly additional components - will again be tested by Four Motors on the racetrack. If the researchers are successful, it may be possible to transfer the acquired knowledge into series production at Porsche.

The German Federal Ministry of Food and Agriculture (BMEL) is funding the “Bioconcept-Car” project via the project-management agency Fachagentur Nachwachsende Rohstoffe e. V. (FNR).

Background
Sustainability through the utilization of renewable raw materials has formed the focus at the Fraunhofer WKI for more than 70 years. The institute, with locations in Braunschweig, Hanover and Wolfsburg, specializes in process engineering, natural-fiber composites, surface technology, wood and emission protection, quality assurance of wood products, material and product testing, recycling procedures and the utilization of organic building materials and wood in construction. Virtually all the procedures and materials resulting from the research activities are applied industrially.

 

• EU Project ALMA: Thinking Ahead to Electromobility

E-mobility and lightweight construction are two crucial building blocks of modern vehicle development to drive the energy transition. They are the focus of the ALMA project (Advanced Light Materials and Processes for the Eco-Design of Electric Vehicles). Nine European organizations are now working in the EU project to develop more energy-efficient and sustainable vehicles. Companies from research and industry are optimizing the efficiency and range of electric vehicles, among other things by reducing the weight of the overall vehicle. The Fraunhofer Institute for Industrial Mathematics ITWM is providing support with mathematical simulation expertise.

According to the low emissions mobility strategy, the European Union aims to have at least 30 million zero-emission vehicles on its roads by 2030. Measures to support jobs, growth, investment, and innovation are taken to tackle emissions from the transport sector. To make transport more climate-friendly, EU measures are being taken to promote jobs, investment and innovation. The European Commission's Horizon 2020 project ALMA represents one of these measures.

For years now, fashion retail has been able to show a moderate but steady growth in sales. However, the share of sales accounted for by online retail is becoming significantly stronger, and consequently that of stationary retail is becoming weaker. In just 10 years, online fashion retail will have a market share as high as that of local fashion stores, according to one of the findings of the study "Fashion 2030 - Seeing what fashion will be tomorrow" by KPMG in cooperation with EHI. "For retailers, the decline in sales in the stationary sector means that they have to reduce their stationary areas," says Marco Atzberger, Managing Director of EHI. A dilemma, because the majority of customers prefer to shop in their local fashion store, despite all the online alternatives.

Textiles, media and electrical goods are currently the categories most frequently purchased online. Consumers believe that online shopping in these categories will also be particularly attractive in the future, although there is also considerable interest in online purchasing of furniture, drugstore and hardware store products.

With sales of 16.5 billion euros, online fashion retail already accounts for 25 percent of total fashion sales, which were around 66 billion euros in 2020. The experts at KPMG and EHI predict that this share will double in the next ten years. The forecasted annual sales of 79.2 billion euros in 2030 are to be divided equally between online and stationary stores. In order to position itself correctly here, the textile trade is facing strategic changes in terms of sustainability and digitization in addition to reductions in retail space. Concepts such as circular economy (recycling) or re-commerce (second-hand) are just as much part of the customer's demands as a smooth (channel-independent) shopping experience or a targeted customer approach.

Online information sources are becoming increasingly important for customers. However, browsing in stores continues to be the main source of information when shopping. One exception, however, is electrical goods - the independent opinion of reviews is the most important source of information here.

Reductions in retail space
As the market share of online fashion retail is becoming increasingly stronger than that of the overall fashion market, there will be a scissor effect for the stationary clothing retail – unless decisive parameters such as store rents change. Permanently reducing the share of fixed costs in the stationary sector can lead to a harmonization of both sales channels and prevent massive cannibalization effects, according to the authors of the study. The reduction in retail space will have the most severe impact on department stores and multi-story formats. Interviews with retail experts show that the retail expects a reduction in space of around 50 percent by 2030 and anticipates shrinkages of up to 70 percent at peak times. However, the current crisis also offers fashion retailers a greater choice of appealing rental spaces and therefore the opportunity to position themselves for the future by strategically streamlining their own store networks, adapting their space and differentiating their concepts to suit their target customers - in combination with smart digital solutions.

Multi-channel approaches are continuing to grow. On the one hand, stationary retailers will increasingly enter the online market; on the other hand, it can be observed that the opening of their own local stores by previously online-only retailers is on the rise.

Shopping experience
For a successful shopping experience, the city centers must be vibrant as well as attractive and should offer entertainment. All of this requires cooperation between all of the local players involved and collaboration with conceptually oriented urban development. To increase the individual customer loyalty and build real trust, fashion retailers must invest more in emotionality and use IT solutions. Whether in-store or online, customers want a targeted and smooth shopping experience, which for retailers means cleverly linking the systems. Availability and finding clothes in the right size also play a significant role in the stationary fashion retail. 42 percent of customers say that they would shop more often in stores, if these factors were guaranteed.

Already today, a concrete shortage of qualified personnel can be observed in certain regions and areas of responsibility. This is likely to become even more severe in the future. The retail’s own qualification measures will increase, and the industry's image will have to be improved.

Despite all technological support, the human being remains the most important factor in retailing - 88 percent agree on this. For 60 percent of consumers, encounters with people in a retail store are becoming increasingly important.

Sustainability
For almost half of the consumers surveyed (46 percent), sustainability is already a worthwhile concept today. This also includes re-commerce and second-hand. 34 percent of customers already buy used clothing, and another 28 percent can imagine doing so. In terms of occasions, a large proportion can also imagine renting clothing. The second-hand clothing trend has the potential to claim a market share of up to 20 percent in the next ten years and therefore to become a significant market segment in fashion retail.

In addition to the sustainability debate, the main factors driving this trend are the digitalization of the "second-hand store around the corner" and the large online fashion platforms that are discovering this market for themselves and making consumers increasingly aware of the models of temporary use.

Laws and regulations as well as increasing pressure from stakeholders have contributed to the growing importance of sustainability. However, the consumer goods sector attaches greater importance than other sectors to the aspect of being able to achieve a reputational gain through a sustainability strategy.

When it comes to the circular economy or rather the recycling of raw materials from used clothing, many companies are already involved in non-profit initiatives and research projects to develop the relevant technologies. In 2030, also due to legal initiatives, many clothing items will probably be made from recycled textile raw materials or fibers, which would substantially shorten the supply chains. "Automated fiber recovery, increasing unit labor costs in the Far East and fewer used textiles, this is the starting point for a perspective revival of textile production in countries close to Europe as well as in Europe itself," says Stephan Fetsch, Head of Retail EMA at KPMG. Although circular economy does not yet play a major role due to the current limited availability, it shows great potential: 28 percent have already purchased recycled textiles, and over 50 percent are positive about it.

Customers believe that retailers and manufacturers are responsible for sustainability. They, on the other hand, would like consumers to initiate the upswing of re-commerce by changing their behavior. New compliance guidelines will have an accelerating effect on the development of the re-commerce market.

A dynamic family business as a future-oriented solution partner for high-tech elastics
 
The various branches of the German textile and fashion industry generate a combined annual turnover of around € 32 billion. Of the approximately 1,400 companies, the vast majority are medium-sized. Special solutions made in Germany are in demand. The importance of technical textiles has been growing for years - as has their share of turnover. Textination spoke with Andreas and Patrick Kielholz about innovative product solutions, the importance of family businesses in today's world, traditions and innovations, challenges and the courage to fail, aircraft construction, the automotive industry, medical technology and diving suits.

The history of today's company "JUMBO-Textil GmbH & Co. KG" goes back to the last millennium. Founded in 1909 in Wuppertal, you have moved beyond the production of pure yard goods for the lingerie industry and are now a demanded competence partner for high-tech solutions for narrow textiles. Which industries do you focus on when developing your technical textiles?

Andreas Kielholz: JUMBO-Textil focuses on particular competences in the field of narrow textiles and not on specific industries. We produce narrow fabrics, narrow braids and knitted fabrics. In these three fields we bring out our special competences: Elastics, individual solutions and individually fabricated elements in combination with non-textile components. There is, of course, a long-standing intensive cooperation with customers from the automotive industry, for example. In this sense, JUMBO-Textil is also an "interior expert". However, this does not imply a focus on a specific industry. Quite the opposite: We are very broadly positioned in terms of industries. New sectors are opening up all the time; most recently, we supplied the toy industry with textiles specially developed for babies and toddlers. We also supplied the medical technology sector with narrow-textile solutions in form of skin-friendly elastics.

Speaking of Elastics - how did the specialization come about?

Patrick Kielholz: The specialization in elastic narrow textiles began as early as the 1920s. In our entrance area you can see one of the first specialized braiding machines that was purchased for this purpose. It is about 100 years old. A landmark decision: It made the step from apparel textiles to technical textiles, which - many years later – became essential for survival, if not possible, then at least considerably easier.
 

What characterizes elastics? Why is the property so important for technical textiles?

Andreas Kielholz: Technical textiles, as well known, are textiles that are developed for a specific technical function. They have to, if you like, be capable of doing something: securing a load, sealing an opening, protecting from heat ... Many of these industrial functions can only be accomplished with elastic textiles - from applications in aircraft construction to protective suits for divers and to textiles in medicine. It is often the specific, highly precisely defined strength-elongation-ratio that makes use in such extreme, highly demanding applications possible. Innovative fibers are manufactured and finished by us on highly modern, digitally controlled equipment. In this way, we achieve highest precision and safety in the elongation properties and and produce a textile high-tech product with high-performance fibers for extreme, often individually requested technical applications.
 

And what does your product portfolio look like for your customers as a whole?

Patrick Kielholz: The spectrum ranges from woven tapes and belts to braided tape, tubular braids and braided cords to nets - in all widths, made from numerous raw materials and with specific, even demanding properties, special features and fabrications. As a solution partner, we often guide our customers from the initial idea to the finished product.
The importance of narrow textiles as components is growing visibly. Since they are very light, very efficient and at the same time very quiet, they are being used more frequently as an alternative to components made of other materials. The demands placed on the textiles are growing with their tasks: Their specifications are becoming increasingly more precise, the tolerances increasingly tighter. In the automotive sector and in protective equipment, for example, fire safety requirements play an important role. Therefore, we only have success with narrow textiles that are permanently flame retardant. We are currently addressing many inquiries for fitness bands with highly precisely defined strength-elongation-ratios. We are also responding to the sustainability question with our portfolio: We are increasingly working on projects with recycled materials or recyclable products. This development is embedded in a comprehensive sustainability strategy, which we are addressing for the entire Group - also in connection with the new planning of our sister company vombaur GmbH & Co KG.

 
What has particularly influenced the company's development process of about 110 years? Were there any significant changes of direction or decisions?

Andreas Kielholz: In the 1970s, we broadened our range enormously by no longer producing technical narrow textiles only for the apparel industry, but for all industries. At the same time, we continued to specialize - in elastics. This is not a contradiction: We implement what we are particularly good at, however, for all industries.
In the recent history of the company, we made a strong push with our new building in 2016. Optimal production conditions were created. With a variety of new production plants, we are at the advanced level of technology and high production capacity. The environment also has an effect on our team. You can feel that people enjoy working here. At the beginning of 2019, we again set an important strategic course when we combined our competencies with vombaur GmbH & Co KG under the umbrella of Textation Group GmbH & Co. KG.
 

These two traditional companies for demanding high-tech narrow textiles will remain independent as companies and brands. Why did you decide to take this step, what is the market response and what can you recommend to other producers in terms of partnerships?

Andreas Kielholz: We have had very good experiences as a sister company: Knowledge transfer, trade show appearances, digitization workshops - the partnership is beneficial in many ways. But - unlike in real life - we were able to choose our sister. The partner companies have to be compatible. Sure, you have to pay attention to that. They should have things in common without doing exactly the same thing. Because if they are too similar, there is a risk of competition, even cannibalization of one of the brands.
Our construct is perceived by our market companions as a good and elegant solution. We could serve as a role model for one or the other. Perhaps we will also expand our circle in the next few year, which we are open to. And our move has also been well received by our customers. In addition to all the other positive effects, succession issues can also be solved more easily in the Group. We are thereby demonstrating future prospects and security.
 

In the medium-sized textile industry, companies were and still are shaped by people - founding personalities, owners, families who live and breathe textile tradition and innovation. In your opinion, what qualities do people need to have in order to be successful in our niche-oriented German industry?

Andreas Kielholz: Successful and formative are people with curiosity and drive. People who like to explore new territories, first in their thinking and then consistently in their implementation. You should be able to inspire others in these explorations. In addition, you should keep a close eye on the market and act accordingly, i.e., constantly questioning the status quo. Self-criticism is therefore also important: Is our path still the right one? Are we fulfilling our aspirations? To move forward as a company, you have to work tirelessly not only in, but also on the company.    

Patrick Kielholz: The important thing is to recognize change and see it as an opportunity, not as a threat. I fully agree with that. However, I would strongly question the idea that it is the one founder, the one owner, and therefore individual people who make a company successful. We live in a very complex and fast-paced world that cannot be overseen and comprehended by a single person. Don't get me wrong, great ideas can come from individuals and help a company succeed. But we can't rely on that. A company today must be managed in such a way that ideas are developed by divergent teams. An environment must be created that gives each person the opportunity to make a difference. A leader must therefore understand how to develop functioning teams.
 

Mr. Kielholz Snr., you are the managing partner of JUMBO-Textil GmbH & Co. KG and one of the managing directors of vombaur GmbH & Co KG. For about two years now, you have your son Patrick at your side as Business Development Manager of JUMBO-Textil. How did that come about? Did you encourage your son to follow in your footsteps?

Andreas Kielholz: Not explicitly. My sons - there's also Kevin, Patrick's brother - had a lot of freedom in their childhood and youth. It was always up to them how they wanted to live their lives. During their school education and their studies, I tried to support everything in a trusting manner. Education has a lot to do with leading by example. I always had a lot of joy in what I did, even if it wasn't always easy. They witnessed this joy every day - and so I may have implicitly encouraged them.  
The fact that Patrick is now part of the team, performing a very good job and already bears a lot of responsibility - of course I'm very happy about that. He is a good, trustworthy corrective for me, because he can do some things better than I can. There is a high chance that Kevin will also join us after completing his technical studies.
 

Mr. Kielholz Jr., you completed your studies with a master's thesis on family businesses. How do you assess the future of family businesses in a global textile industry in general? And where do you see JUMBO-Textil here?

Patrick Kielholz: Family businesses are usually employers that retain their employees for a long time - by providing a family-like working environment and a corporate culture that creates trust. These include values that are important to the younger generations. Status symbols are becoming less important. This can create a working environment in which highly innovative and flexible work can be done - if it is not prevented by an overly patriarchal structure. Family businesses can usually still work on this. We are trying to create such an innovation-friendly environment in the Textation Group with JUMBO-Textil and vombaur, and in this way to be the best solution partner for narrow textiles in the future.
 

You manufacture exclusively in Germany. Why? Have you never been tempted to benefit from lower wage levels in other countries?

Andreas Kielholz: We position ourselves as a highly qualified solutions partner and aim to provide our customers with excellent expertise in the field of narrow textiles. We can do this best in a country with very good education and training opportunities, which for us, is Germany as a location. Of course, we also work in close cooperation with partners in Eastern Europe.
 

Customized instead of solutions for major customers: The topic of individualization up to batch size 1 takes up a lot of space today. At the new site in Sprockhövel, you have invested significantly in innovative production technology. What is your opinion of individual product solutions, and in which areas of application have you already implemented them successfully?
     
Andreas Kielholz: We don't produce tailored suits; we produce goods by the meter. Batch size 1 - this has a special meaning for us: We develop in exchange with our customers for one project - a car seat in an off-road vehicle, a crab on a crane, an exoskeleton, a baby grab ring, whatever - so we develop a textile component for this one project. Individually specified for the particular concrete application and its requirements - for example, with regard to elongation, temperature resistance, skin-friendliness, etc. All the properties of the textile are configured individually. And then it is produced in the required quantity. This is definitely a customized solution. So; if the customer project is the tailored suit, then "individualization up to batch size 1" is our day-to-day business. Because that's what we do.
 

What does it take for such solutions?

Patrick Kielholz: A close exchange is important for such individual solutions, but also precise industry knowledge and knowledge of the applicable standards. We assist some customers all the way to product registration and advice on technical delivery conditions and documentation. For individual solutions, know-how and experience go far beyond technical textile expertise. The key basis here is to understand the customer's product, the manufacturing process and its purpose. We want to offer a complete solution that provides the greatest value for the respective client company. This starts with the selection of the raw material and ends with the use by the end consumers..

Breaking new ground means being willing to make decisions, overcoming fears - and therefore also having the courage to fail. Not each project can succeed. In retrospect, which entrepreneurial decision are you particularly glad you made?

Andreas Kielholz: The courageous decisions to reconstruct JUMBO-Textil, the corporate alliance with vombaur and the planned new building here are among them - and: having my son on the Executive Board. He brings a new, different perspective to the company, which enriches us enormously. In addition, I simply enjoy it. Who sees their grown-up children every day?

Patrick Kielholz: Yes, that took courage to fail. (laughs) Seriously, not every result of a decision can be dated as firmly as the commissioning of our new building. We are right in the middle of some processes. We started digitization early on, for example, and it will certainly never be completed. It has an infinite number of facets - from materials management to product development, from quality assurance to internal and external processes. It’s an unbelievably dynamic topic that is constantly evolving and opening up new potential for improvement. You need smart people who want to work as a team to advance the issues, otherwise you'll be lagging behind instead of moving forward. The same applies to sustainability - also a topic that must be viewed as an opportunity rather than an unwanted evil, as is so often the case.

Andreas Kielholz: That's the crux of the matter: As a company, it's important not to be driven by such major issues, but to actively drive development forward yourself.
 

How important is the concept of sustainability in corporate decision-making? Which certifications do you use and where do you go beyond legal requirements?

Andreas Kielholz: Our quality management system is certified according to IATF 16949:2016, an extension of ISO 9001 developed by the automotive industry. We have also been awarded Formula Q-Capability according to the VW Group's customer-specific certification with a score of 95%. In the area of environment and sustainability, we are certified to the environmental management standard ISO 14001:2015, and many of our products meet the OEKO-TEX® Product Class I certificate. In addition, we expressly stand by the claim to enforce human rights, labor, social and ecological standards in economic value-added processes, as formulated in the Code of Conduct of the German Textile and Fashion Industry.

Patrick Kielholz: A specific feature of family businesses becomes apparent here as well. The demands on the company and the values it stands for are much more personal demands. People must and want to be measured against these demands as individuals. They cannot and do not want to hide in the anonymity of stock corporations. A family business owner is also personally connected to the stakeholders of his company and therefore has a stronger interest in pursuing social, environmental and economic sustainability.

How do you judge the efforts of other countries, such as China, to increasingly address the issue of sustainability? Will this mean that an important unique selling point in the comparison between Europe and Asia will be lost in the future?

Andreas Kielholz: The topic of sustainability has not yet reached its peak, in other words: demand will continue to rise here as well. China is getting stronger, but Europe is also working on not losing its pioneering role. Increased demand and competition will benefit us all, especially agile companies.
 

The COVID19 pandemic has also left its mark on the textile and clothing industry. When you look back on just under a year of "state of emergency" - what positive experiences do you take with you, where do you see a need for improvement, for what support are you grateful and where did you feel left alone?

Andreas Kielholz: By facing up to the challenges early on and - thanks to our timely, multi-layered controlling - always knowing where we stand, we were able to adapt quickly. This is how we have largely come through the crisis well. The newly developed forms of work - mobile working and video conferencing, partly also in-house - will continue to exist. We have also made significant progress in digitalisation and new media.

     
If you had to introduce your company in 100 words to someone who does not know JUMBO-Textil: What would you say? What makes you unique?

Patrick Kielholz: JUMBO-Textil is a solution partner - our customers are always at the center of our thoughts and actions. For them and their projects, we develop and manufacture sophisticated technical narrow textiles: precise, custom-fit and Made in Germany.

Andreas Kielholz: I don't even need that many words: Highest quality standards, intensive customer relationship, reliability and unique Elastics expertise.

Patrick Kielholz: These were eight. (laughs)

The Interview was conducted by Ines Chucholowius,
Managing partner of Textination GmbH

 

Contact restrictions, mandatory use of face masks, home office: The Coronavirus has turned our daily lives upside down and reduced public life almost to zero. The impact of the pandemic has even further in-creased the existing pressure for action to achieve the Sustainable Development Goals. And that is why, it is not surprising that the issues of sustainability, climate protection and digitization are gaining ground in the industry's and consumers' awareness. New management qualities are required.

Textination talked to Sonja Amport, Director of the STF Swiss Textile & Fashion Institute, about the new training course CAS Sustainability Management in Textiles. After career experiences in the industry and in associations, the business economist with a master's degree in International Management has been contributing her knowledge of textiles, education, business administration, as well as marketing and sales to STF with vigor and passion since 2015.

The history of the STF Swiss Textile & Fashion Institute began in 1881. In this year Pablo Picasso was born and Billy the Kid was shot. The Tales of Hoffmann by Jacques Offenbach was premiered and Thomas Alva Edison built the world's first electric power station. The Breuninger department store opened at Stuttgart's market square and Rudolph Karstadt's first store in Wismar.
What led to the foundation of STF during this period of time and what values do you still feel committed to today?
In 1881, the textile industry in Switzerland was thriving. Companies in the sector of spinning, weaving, finishing and others burgeoned. However, there was a shortage of trained specialists who could have operated or repaired the machines. This is why the companies teamed up and founded the STF Swiss Textile & Fashion Institute - a place for education and training of specialists for the Swiss textile and clothing industry. For this reason, the STF is still organized as a cooperative today. Therefore, we are still committed to the values of competence, customer orientation, innovation, inspiration and passion to this day.

If you had to introduce your educational institution in 100 words to someone who doesn't know the Schweizerische Textilfachschule: How does the school define itself today and on which fields of activity does it focus?
The STF Swiss Textile & Fashion Institute stands for sustainable educational competence covering the entire life cycle of a textile, fashion or lifestyle product. With the "STF-LAB", the STF positions itself as an educational service provider with three business fields. The core field is "Education", where the STF offers numerous training and further education courses, from basic education to bachelor's and master's degrees. In the "Incubator & Makerspace" (STF Studio), the main focus is on shared infrastructure, mutual inspiration and the thereby together achieved progress. In the third business field, "Think Tank & Consulting", the school acts as a think tank, where experts can be "hired" and part-time management is offered.

Keyword life-long education: What further education programs does the STF offer for the textile and clothing industry, even after a successful degree?
Which industry sectors and which countries are you focusing on?
Firstly, we offer a variety of informal modular courses for the textile and clothing industry as well as retail, in which one can achieve a good overview of a specific topic within 45 lessons. Such as: Welding & Bonding, Smart & Functional Textiles, Start-up in Fashion or the Steiger Stitch Module, where you learn to program your own knitting designs and then knit them on a "Shared Machine" at STF. We also offer two-week intensive summer courses each year, for example in Sustainable Fashion Design. In terms of formal education, I can recommend our master’s program in Product Management Fashion & Textile in German or our two CAS in Sustainability Management in Textiles. Once with face-to-face classes in German and once via e-learning in English. At the moment, we are focusing our programs on Germany, Austria and Switzerland (DACH region). Our internationalization strategy was abruptly stopped due to Covid-19. With our English master's programs, we were focusing particularly on the Indian and Chinese markets We are now strategically repositioning ourselves with English language courses and will start marketing again from 2022 onwards. The goal is to provide flexible, modular master's programs with a high e-learning component, so that costs remain moderate and travelling can be reduced.

Sustainability has changed from a buzzword to a matter of course: The latest OTTO Trend Study even says, that sustainable consumption has entered the mainstream society. What does this mean for the textile and clothing industry? Are the companies positioned in terms of personnel in such a way, that they have professionally incorporated this complex of topics into their service portfolio?
Swiss companies have recognized, that they only have a chance against foreign competitors, if they are capable of innovation, consistently operating in a niche and can stand out through sustainable production. Sustainability is therefore an absolutely central USP. With this in mind, many companies are dealing this and, of course, also send their employees to us for further training.

The STF offers - so far being the only one in the German-speaking area - an internationally recognized further education in the field of Sustainability Management in Textiles as a Certificate of Advanced Studies CAS. Which sub-areas from design, production, process optimization to marketing does the certificate cover?
The STF offers the internationally recognized University of Applied Sciences certificate in collaboration with SUPSI, the Scuola Universitaria Professionale della Svizzera Italiana in Ticino.

In the degree program, we look from a holistic perspective and at the entire value chain of a textile, i.e. from design to production and to marketing, global challenges, where sustainability acts as a multilateral solution. In addition, the normative and strategic management of sustainability, topics related to social responsibility as well as initiatives and standards for the textile industry are highlighted. An important element of the CAS are raw materials and products, i.e. not only sustainable fibers but also fabrics or the use of chemical agents. Last but not least, aspects around biodiversity, animal welfare, marketing, labeling as well as possible future scenarios and best practice examples are highlighted.

Who could be interested in the CAS Sustainability Management in Textiles and why? What impact can the certificate have on a career?
The CAS is attractive for managers who are generally concerned about the strategic orientation of a company, as well as for specialist employees in design, product development, purchasing, sales or quality management who are responsible for operationalizing the sustainability strategy. And of course we always welcome young designers with their own fashion labels willing to break new, sustainable grounds and to stand out from the rest. The push in professional life is strongly related to one's own personality. So far, however, all graduates have found attending the further education program to be extremely beneficial for their own career paths.

What about the formal aspects of the CAS? For example, are there selection criteria, by when do you have to register, what does the curriculum look like, and what are the fees for attendants?
We start the educational courses at the end of August each year. Early registration, preferably by mid-May, is recommended to secure a place. In the face-to-face course, 120 lessons take place in Zurich and Ticino, costs of CHF 5,900. -, including teaching materials and examination fees, can be expected. In the e-learning course, with a few days of on-site attendance, the content is taught synchronously by Microsoft Teams, usually by the same lecturers. Here, the fee is CHF 5,600.

These costs do not include personal expenses as well as travel and accommodation costs.

Those who are interested can find the facts & figures on our homepage (available in German only):
(www.stf.ch/kurse/cas or www.stf.ch/kurse/cas-online)

The COVID-19 pandemic has clearly shown us the limitations of mobility. How have you responded to this as an educational institution?
Physical limitations can easily be overcome with e-learning. One of the reasons why our classes continued regularly throughout the pandemic period. For the period after Covid-19, we are planning, in addition to face-to-face study modules, further online-only seminars, such as our CAS-Online. These will be offered increasingly in English as well. We are also currently testing possible forms of hybrid lessons. Meaning, while some are educated on-site in Zurich, people who have to travel a long way, such as those from Germany, Austria and Switzerland (DACH region), can attend the lessons virtually and live from a distance.

The past year has left its mark on the textile and apparel industry. When you look back on a year of "state of emergency" - what positive experiences do you take with you, where do you see a need for improvement?
It was definitely a year of a state of emergency! One positive aspect is, that we at STF were ready and able to teach online from day one of the lockdown. The learners, students and my team all showed the greatest understanding and flexibility. But as an institute in the textile, fashion and lifestyle sector, teaching also thrives on visual materials. Being able to feel and smell the yarns and fabrics, as well as to discuss the experiences in person, are important learning experiences. It is definitely a challenge to implement such key learning elements online. Overall, Covid-19 has catapulted us forward as an institution in regards to the topic of digitization by what feels like two years. However, I would be grateful if we could return to normality as soon as possible and to an everyday life with "less distance".

Breaking new ground means willingness to make decisions, overcoming fears - and thus courage to fail. Not every project can succeed. In retrospect, which decision that you made for the STF profile are you particularly pleased about?
I'm proud to say that most of the projects we tackle are successful. There is almost always a way. Sometimes, as you move forward, you just have to adjust the direction a bit to get where you want to go. A groundbreaking innovation was certainly the modularization of (almost) all degree programs. Students can therefore benefit from a wide range of choices and create their own curriculum.

A second decision I'm grateful for was that, as a small institute, we invested a lot in expanding our digital capabilities and infrastructure at a very early stage, which we are now benefiting from. With very well-trained lecturers and a learning platform, a VM platform and modern 3D software in various subject areas, we consider ourselves a pioneer in e-learning and digitalization across Europe. Capabilities, which also pay off in terms of sustainability.

The interview was conducted by Ines Chucholowius, Managing Director of Textination GmbH

 

Further information:

• Master in Product Management Fashion & Textile
  www.stf.ch/kurse/master-pm/
• CAS in Sustainability Management in Textiles
  (in German with classroom instruction and in English as an online course of study)
  www.stf.ch/kurse/cas/ or www.stf.ch/kurse/cas-online/

From 24-hour deliveries, status tracking and green packaging to textile recycling and innovative cleaning technology: new services have the potential to revolutionise the business of dry cleaners and laundries. Against this background, Messe Frankfurt invites start-ups to present their products and ideas at Texcare International. The world’s most important event for the textile-care sector in Frankfurt am Main from 27 November to 1 December 2021 offers young entrepreneurs outstanding opportunities to draw the market’s attention to their innovations.

The demands placed by both private and commercial customers on textile care are extremely high, especially in terms of speed, immediate availability, transparent communication and sustainable solutions. In this connection, Johannes Schmid-Wiedersheim, Director of Texcare International at Messe Frankfurt, says, “Start-ups have an important role to play when it comes to promoting digitalisation and sustainability in the world of textile care. In many cases, they succeed quickly in transforming the results of scientific research or trends from other sectors into useful projects. To support this, we want specifically to promote young, agile companies at Texcare International and offer them an attractive ‘Start-up Package’.”

Digital platforms offer dry cleaners and laundries an opportunity to promote their services online in a modern way. Summarising what makes these platforms so important, Daniel Dalkowski, Managing Director of the European Research Association for Innovative Textile Care (EFIT), says, “Digital platforms are undoubtedly one of the most important achievements of recent times – not just because there are so many of them but also because they have found imitators in the sector. In this case, the innovation is to be seen in a combination of ordering, flexible logistics and billing in a smartphone app or online platform.”

With their robotics solutions and bright ideas for artificial intelligence, IT start-ups help textile care companies on their way to becoming smart laundries. Elgar Straub, Managing Director, VDMA Textile Care, Fabric and Leather Technologies, explains how machine and plant manufacturers have benefited from their input: “In the field of mechanical engineering, an important role is played by start-ups offering technical solutions covering a broad spectrum of sectors, e.g., virtual machine commissioning and the optimisation of production process chains.”

Naturally, company founders in other disciplines are also putting forward their ideas. Against the background of the plastic waste debate, there are, for instance, numerous start-ups offering biodegradable packaging materials. As well, there are start-ups in the field of textile recycling, which process used workwear or laundry and thus contribute to the circular economy. And what does the future hold for the sector? One thing is for the experts certain: artificial intelligence and automation offer a great potential for ‘outsiders’ with genuine innovations to gain a foothold in the market. Improvements in the logistics chain of laundries and dry cleaners also have excellent chances of success.

Market entry at Texcare International Texcare
International from 27 November to 1 December 2021 offers start-ups an outstanding opportunity to draw attention to their services and to make contact with established companies. The Start-up Package of Messe Frankfurt includes a turnkey exhibition stand.

The prerequisites for participation:

• The company was founded no more than ten years ago per 27 November 2021
• The company employs max. ten people.
• The annual turnover does not exceed € 1 million (net).
• The start-up offers innovative products or services especially for the textile-care sector.

The product spectrum of Texcare International embraces machines and plant, laundry and cleaning substances, IT and logistics solutions and workwear and laundry.

Interview with Claudia Bitzer, Owner Bitzer PR, Albstadt

The past year was not only a big economic challenge for many companies, but also in terms of communication - whether in advertising or in PR topics - new ground had to be broken. Contact restrictions up to a strict lockdown, the cancellation of many trade fairs, congresses or other event formats made it necessary to rethink.

Textination discussed it with Claudia Bitzer, owner of the PR agency of the same name in Albstadt, Baden-Württemberg. Her customers include medium-sized companies from the textile and clothing industry as well as machinery manufacturers, public clients and the media.

With your PR agency based in Albstadt, you have also been busy in the textile industry for a good 5 years. If you had to introduce yourself in 100 words to someone who doesn't know you: Why did you decide to become your own boss after working for an agency, and what distinguishes your work?
Actually, self-employment gave me a call: An acquaintance suggested that I take over the communication for his employer, a textile machine manufacturer in the Alb, as a freelancer. When I was on the phone, I had our ten-day-old son in my arms. I was also a PR consultant at Ketchum in Stuttgart. Because I was curious, I got to grips with the matter over the next few months. With success: The textile machines have turned out to be surprisingly tangible products, after all, they make the clothes that we wear on our bodies every day. From this my access to the textile industry developed, which I would call my home base today.

Because I serve various companies along the textile chain, I have an overall view of the industry and can offer overarching stories with different perspectives. I also have a weakness for complex, "dusty" topics, regardless of the industry. I can delve in them with devotion in order to present them vividly. That's why I would call myself a content specialist.

In addition to German, English, Spanish and French, you speak Swabian fluently. Why is it important to have regional roots when you work for export-oriented companies in the textile industry in Baden-Württemberg?
You got that about fluent Swabian from my website, right? (Laughs) But yes, it is very helpful if you can feel whether "gschwind" – Swabian for “pretty fast” - tolerates a delay or has to be dealt with immediately.

I think the Swabian is really important in terms of the mentality behind it. I grew up in the Alb, my father ran a medium-sized company of his own. I understand many things without a customer having to explain them to me.

For example, modesty in relation to one's own person. Especially in long-established family businesses, the owners play an important role. They bear a great responsibility, both in the company and at their location. Nevertheless, the focus is always on the entrepreneurial performance, the product that, manufactured somewhere in the Swabian province, can keep up with the German, European or global competition. That doesn't happen by itself, but requires courage, entrepreneurial spirit and a great deal of openness to new things, and that fascinates me. I also often notice that by the passion, that these leading family businesses bring with them, I am carried away.

Breaking new ground means being willing to make decisions, overcoming fears - and thus also having the courage to fail. Not every project can succeed. In retrospect, which entrepreneurial decision are you particularly glad to have made?
Apart from being self-employed? The first corona lockdown with home schooling and closed daycare centers was a big challenge. On the one hand, I was relieved that it became quieter on the customer side between the end of March and the beginning of June, otherwise it would not have been feasible either professionally or in terms of family. On the other hand, this silence scared me and I often asked myself whether self-employment was the right way to go.

In early summer, when the situation on all sides had stabilized somewhat, I tackled the problem head on: I looked for co-working spaces and took extensive further training in online marketing. Being honest, of course, these were business decisions. Fortunately, they are already paying off, even if I may sit alone in the office for now.

Is there any work you are particularly proud of? Which story moved you beyond normal and which thematic challenges do you love?
One project that I fondly remember is the communication referring to a repdigit anniversary one of my clients was celebrating. For this, I first put 111 years of the company’s history down on paper in weeks, no, months of archive work. Because I had delved so deeply into the subject, I came up with many ideas for the messages of the anniversary celebration. Fortunately, the client was quickly convinced. At some point we had a signet, a slogan and a really good story for the anniversary. Incidentally, we still benefit from the numerous proof points we worked out for the occasion in our product and corporate communications today.

In addition, the project has naturally deepened the relationship with this client. I also work closely with the advertising agency that accompanied the anniversary communication. I consider such long-term partnerships as a great asset.

Have the messages you want or need to communicate for your clients changed in Corona times? And what was the focus of your work in 2020?
Unsurprisingly, the focus of work in 2020 was on online communication. For almost all of my customers we will start planning and implementing new measures in this area in the coming year.

As for the messages, little has altered. This is certainly due to the fact that the meta-topics have remained the same. Take sustainability, definitely a long-running favorite in the textile industry, and the sub-topic regionality. In contrast to previous crises, the Corona pandemic has not sidelined these approaches, but intensified them because it has shown us how dependent we are on production abroad. The same applies to the issues of transparency and quality.

Precisely because the themes have stayed the same, the crucial part for me is to find a unique story within these permanent themes so as not to disappear into the big river. That requires empathy, creativity - and a good portion of diligence.

Moving away from the simple advertising message to storytelling - what recommendation would you give medium-sized companies in general regarding their communication for the coming year? Are there any special features that the textile industry in particular should consider?
I think that will go in the direction of "We are still there, and even stronger than before". After all, the crisis demanded a lot from everyone. But it is always a productive phase, because when it comes to a head, it forces us to develop further that otherwise would not have been initiated or at least would have been initiated later. Therefore, it can represent a turning point, definitely for the better.

Take digitization, which is the most obvious approach: the crisis has given rise to a boost in this area; the online shop was or is to be expanded, the service is to become more digital.

Apart from that, there are certain individual changes in every company that the crisis has brought about. You can have the courage to name and tell them, because these are stories that interest everyone.

Goodbye Facebook - good morning TikTok. Which social media platforms do you recommend to your clients and under what conditions should medium-sized companies get involved?
TikTok has so far been more of a topic that I discuss with my daughter, who is almost 12 years old. But seriously: I recently read in a study published by Hootsuite that at the beginning of 2020, less than ten percent of Germans were using TikTok. On Facebook, the user share is still over 60 percent. For that reason alone, we shouldn't simply dismiss Facebook.

When I discuss the topic of social media with my clients, it is important for me not to think from the channels. Sure, it's tempting, but other questions should be asked at the beginning: What is the long-term goal of the social media activities? What resources are available - and what budgets? By now it is well known that social media is an extensive field of activity in its own right, which ties up corresponding resources. In medium-sized businesses, where I rarely have access to a multi-headed marketing team, a solid strategy is the be-all and end-all. It must be very, very clear which target groups are to be addressed. Then I can talk about channels and choose the most important ones. This almost certainly includes LinkedIn and Xing, as well as Instagram and Facebook, the latter especially in an international environment. By the way, the evaluation is just as important, it tends to fall behind. The relationship between measured values and corporate goals is anything but trivial.

Trade fairs, events, press conferences and meetings - these have almost completely fallen by the wayside in 2020. How important do you consider face-to-face communication to be in the long term, and which channels and measures do you recommend to your customers to compensate for these losses?
Face-to-face contact remains important! Of course, we all realised last year that not every event has to be a face-to-face event. A video conference saves time and money and, with the right discipline, can be just as effective as a face-to-face meeting. Many service cases can also be solved by video telephony, no one has to travel around. I am therefore convinced that we will not return to the meeting in person culture we had before Corona, even if this will be possible again at some point.

That's why I advise my clients to take advantage of the digital opportunities that are opening up everywhere. At the moment, everyone is still a beginner, you can only learn. Take virtual trade fairs: This is a fundamentally different approach than the classic presence fair. There is no need for a large trade fair team that is ready from 6 a.m. to 8 p.m. There are no press appointments either. It is much more important to contact the visitors directly, i.e., to collect leads, to group the visitors and to stay in touch with them after the event by providing them with tailor-made content. Speaking of content: at the latest with such online events, it becomes clear how diverse content must be prepared. To pick up customers in the virtual space, you need graphics, videos, animations and much more.

Nevertheless, it will not work without direct, physical contact. I remain convinced that people buy from people. Video conferences work particularly well when the participants already know each other from real life. And the textile industry in particular thrives on haptics. I can never feel a yarn or a fabric digitally. Nor can I feel the production speed of a machine. With every revolution there is a slight breeze. You can't get that digitally.

 

The interview was conducted by Ines Chucholowius, CEO Textination GmbH

The recently launched 6.1 million Euro project INNO4COV-19, funded by the European Commission (grant agreement no. 101016203), will support the marketing of new products to combat COVID-19 over the next two years, throughout Europe. The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP is contributing its know-how in sterilization using accelerated electrons and on near-to-eye visualization.

The €6.1 million project INNO4COV-19 is committed to supporting the commercialization of new products across Europe for combatting COVID-19 over the next two years. Looking for the fast development of products – from medical technologies to surveillance solutions - the project will boost innovation to tackle the new coronavirus, reinforcing Europe's technological leadership, and invigorating an industrial sector capable of protecting citizens' safety and well-being.

Officially starting on October 1, the virtual kick-off took place on October 6 – 7, counting with the support of two European Commission officers.

The 11-partner consortium led by INL – International Iberian Nanotechnology Laboratory, is looking for efficient and fast solutions that can help in the fight against COVID-19 jointly with the other actively involved industrial and RTO partners.

The mission of INNO4COV-19 is to create a “lab-to-fab” platform and a collaboration resource where companies and reference laboratories will find the tools for developing and implementing innovative technologies – from idea assessment to market exploitation. This work will be carried out as part the European Union Coronavirus initiative and in strong collaboration with all the funded projects where to accelerate the time to market for any promising product.

INNO4COV-19 is set to assist up to 30 test cases and applications from several areas spanning from Medical technologies, Environmental Surveillance systems, Sensors, Protection of Healthcare workers and Artificial Intelligence and Data mining. To achieve this, INNO4COV-19 is awarding half of the budget to support 30 enterprises selected through a set number of open calls during the first year of the project.

The first call will be launched in November 2020 across several platforms. Awardees will receive up to €100,000 each and benefit from the INNO4COV-19 consortium's technical, regulatory, and business expertise.

Roll-to-Roll Equipment and Electron Beam Technology for Large Area Sterilization of textile materials
During pandemic events like COVID-19, MERS, SARS or Ebola a substantial shortage of sterile materials for medical uses was observed due to peak demands. Fraunhofer FEP will contribute their roll-to-roll equipment and electron beam technology for the purpose of large area sterilization of textile materials to the INNO4COV-19 project.

Usually the textile material is produced in non-sterile conditions and therefore must be sterilized before being delivered to the consumers (e. g. hospitals); Sterilization at product level (sterilizing the final manufactured masks) is limited in throughput, due to a high number of individual small pieces, that must be sterilized.

Project manager Dr. Steffen Günther of Fraunhofer FEP explains the role and aims of the institute in more detail: “INNO4COV-19 will establish and verify a process chain for high throughput (4500 m²/h) electron beam sterilization of fabric material in roll-form in a single TRL 7 pilot machine to allow efficient manufacturing of sterile face masks and other fabric based sterile products without the need to sterilize the final product.”

OLED Microdisplays for Detecting Infected People
Another topic of Fraunhofer FEP within INNO4COV-19 deals with the earliest possible detection of infected people. A widely used strategy to early identify individuals with disease symptoms is body temperature screening using thermal cameras.

One possibility to allow continuous body temperature monitoring, is the integration of a thermal camera into a smart wearable device. Therefore, Fraunhofer FEP is using their OLED microdisplay technology. This allows small (< 3 × 2 cm²), ultrathin (< 5 mm including control circuitry) and ultra-low power (< 5 mW) devices to show visual information. In combination with an infrared sensor a thermal imager will be realized to both measure body temperature and directly displays the result via near-to-eye visualization. The system can be embedded within smart glasses, hats, caps or personal face shields.

About INNO4COV-19 project:
Website: www.inno4cov19.eu
Please contact: info@inno4cov19.eu

 

• DFG and Fraunhofer support trilateral project on autonomous driving

For many employees, it is an inviting vision of the future: to drive to work in their own car and still make good use of the travel time: Reading news, checking e-mails or relaxing and enjoying the first coffee of the day. In the future, passengers of autonomous vehicles will be able to pursue new activities. However, this will require new (software) tools to understand customers’ expectations, strengthen trust and demonstrate safety. With the EMMA4Drive project, the German Research Foundation (DFG) and the Fraunhofer-Gesellschaft are funding the development of a dynamic human model for the development of (partially) autonomously driving vehicles.

Researchers from the Fraunhofer Institute for Industrial Mathematics ITWM and the company fleXstructures are developing a muscle-activated human model together with scientists from the Institute for Engineering and Computational Mechanics (ITM) at the University of Stuttgart.

This model dynamically simulates the interaction of human body parts and the vehicle seat during driving maneuvers. The resulting software prototype, EMMA4Drive, will be used as a digital image of the passenger and will analyze and evaluate his safety and ergonomics during driving maneuvers.

Realistic movements instead of quasi-static investigations
So far, human models have been used either in crash simulations to estimate the risk of injury or in ergonomic analyses. In crash analyses, detailed, computationally intensive models are used for calculations in the millisecond range, which are not suitable for the simulation of dynamic driving maneuvers, because here longer processes have to be simulated. In contrast, human models for ergonomics analysis are based on the simplified kinematics of a multi-body model and so far, only allow quasi-static investigations. Realistic postures and movements during new activities can only be modeled with a lot of effort using these models.

"The by us developed prototypical human model EMMA uses an optimization algorithm to automatically calculate new postures and movement sequences with the associated muscle activities," explains Dr. Joachim Linn, head of the department "Mathematics for the Digital Factory" at the Fraunhofer ITWM, the special feature of EMMA. "This means that the new motion sequences for (partially) autonomous driving can be implemented and examined comparatively easily in the simulation model - for example when the driver takes over the steering wheel."

EMMA4Drive thus enables a comparatively simple implementation of new movement patterns and an efficient virtual examination of safety, comfort and ergonomics in (partially) autonomous driving. "Our goal is to have a further developed prototype of our digital human model EMMA available at the end of the project, which we can use to investigate and improve seating and operating concepts when driving semi-autonomous or fully autonomous vehicles," Joachim Linn explains.

DFG and Fraunhofer support six trilateral projects with EUR 5 million
In the trilateral project EMMA4Drive, the University of Stuttgart contributes extensive experience in the fields of active human modeling, vehicle safety and model reduction. The Fraunhofer ITWM contributes expertise in multibody-based human modeling and motion optimization by means of optimal control. The company fleXstructures develops, distributes and maintains the software family IPS including the digital human model IPS IMMA, which simulates motion sequences during assembly work.

"EMMA4Drive - Dynamic human model for autonomous driving" is one of six projects funded by the DFG and Fraunhofer. The aim of the EUR five million funding is to involve companies in research innovations at an early stage. Three project partners each from universities, Fraunhofer Institutes and industry are cooperating on the basis of a joint working program. The Fraunhofer experts take the lead in the exploitation of the project results for the application partners or other interested parties from industry.