From the Sector

from to
Reset
484 results
(c) Edana
18.07.2025

Edana: Potential EU Countermeasures on US Fluff Pulp Risk Driving Up Prices of Hygiene Products

EDANA, the leading association representing the nonwovens and related industries, which include the manufacturers of hygiene products, such as menstrual products, adult incontinence and baby diapers, and their value chain, acknowledges the European Commission’s potential decision to implement countermeasures in response to the recently imposed US tariffs. 

One such measure—targeting US-origin fluff pulp—would have far-reaching and unintended consequences. Fluff pulp, classified under CN code 47032100, is a critical raw material used in the manufacture of absorbent hygiene products (AHPs), including but not limited to baby diapers, feminine care, and adult incontinence products. These products are essential to the health, dignity, and daily wellbeing of millions of Europeans—particularly babies, women, and elderly citizens. 

From the first diaper of a newborn to the pads that allow women to move through their day with confidence, to the products that restore dignity to the elderly—this material touches lives in deeply personal ways. 

EDANA, the leading association representing the nonwovens and related industries, which include the manufacturers of hygiene products, such as menstrual products, adult incontinence and baby diapers, and their value chain, acknowledges the European Commission’s potential decision to implement countermeasures in response to the recently imposed US tariffs. 

One such measure—targeting US-origin fluff pulp—would have far-reaching and unintended consequences. Fluff pulp, classified under CN code 47032100, is a critical raw material used in the manufacture of absorbent hygiene products (AHPs), including but not limited to baby diapers, feminine care, and adult incontinence products. These products are essential to the health, dignity, and daily wellbeing of millions of Europeans—particularly babies, women, and elderly citizens. 

From the first diaper of a newborn to the pads that allow women to move through their day with confidence, to the products that restore dignity to the elderly—this material touches lives in deeply personal ways. 

Approximately 90% of fluff pulp is used in AHPs due to its role in these products. US fluff pulp is irreplaceable because most of the global fluff pulp capacity comes from the US, and it can’t be fully replaced by other markets. Imposing duties on this material would significantly increase manufacturing costs, compounding already high inflationary pressures. The result: higher prices on essential hygiene items for those families who can least afford them. 

The ripple effects would extend beyond consumers. European manufacturers would be placed at a disadvantage, facing rising input costs while competitors outside the EU continue exporting finished hygiene products into Europe without the same burden. This threatens not only industry jobs but also the long-term resilience of our production ecosystem. 
The global market reality further complicates the issue:

  • The United States accounts for more than 80% of global fluff pulp production. There are no alternative suppliers that can meet European demand in volume or regulatory compliance. 
  • Less than half of EU demand for fluff pulp can currently be met through sources outside the US. 

If the proposed duties are enacted, they would not only strain household budgets but risk disrupting the supply of indispensable health and hygiene products across Europe. 

EDANA calls on policymakers to exclude fluff pulp (CN code 47032100) from any countermeasure. Protecting access to essential products, supporting European manufacturers, and avoiding unnecessary hardship for vulnerable consumers must remain a shared priority.

17.07.2025

Hygienix™ 2025 opens registration

INDA, the Association of the Nonwoven Fabrics Industry, has opened registration and tabletop reservations for Hygienix™ 2025, taking place Nov. 17-20 at the Omni Orlando ChampionsGate Resort in ChampionsGate, Florida.

Hygienix will bring together industry leaders, innovators, and business professionals from across the absorbent hygiene products (AHP) industry for expert-led conference sessions, product showcases, interactive workshops, networking opportunities, and the presentation of the Hygienix Innovation Award™.

Hygienix Program Highlights

INDA, the Association of the Nonwoven Fabrics Industry, has opened registration and tabletop reservations for Hygienix™ 2025, taking place Nov. 17-20 at the Omni Orlando ChampionsGate Resort in ChampionsGate, Florida.

Hygienix will bring together industry leaders, innovators, and business professionals from across the absorbent hygiene products (AHP) industry for expert-led conference sessions, product showcases, interactive workshops, networking opportunities, and the presentation of the Hygienix Innovation Award™.

Hygienix Program Highlights

  • Sustainability and Circularity: Presentations and panel discussions will cover the latest advances in biobased materials, natural fibers, packaging innovations, Safe Operating Limits (SOL) and End-of-Life (EOL) solutions, and product construction with sustainable materials.
  • Consumer and Market Insights: Speakers will explore trends such as the growth of private label products, regional market outlooks, and in-depth sessions on skin health and the microbiome.
  • Product Innovation: Panelists will delve into strategies for overcoming hurdles in the race to bring period care innovations to market.
  • Regulations and Standards: Presentations will address crucial regulatory updates, including Extended Producer Responsibility (EPR), and testing methods for modern AHP designs.

Workshops
Kicking off the conference, INDA will host three workshops on Nov. 17, providing hands-on learning and insights on crucial topics within the sector, including:

  • Fundamentals of Absorption Systems and Opportunities in Adult Incontinence
    James Robinson, Principal, Absorbent Hygiene Insights, LLC
  • Innovations in Menstrual Care
    Heidi Beatty, Chief Executive Officer, Crown Abbey, LLC
  • Baby and Infant Care Market Dynamics
    Natalia Richer, Director of Business Development, Diaper Testing International

Hygienix Innovation Award™
Recognizing breakthrough products, technologies, and solutions that are making a significant impact in the hygiene sector, the Hygienix Innovation Award will be awarded at the event.

Nominations will be accepted until Sept. 15. Finalists will present their products on Nov. 18, and the winner will be announced on Nov. 20 to close the event. Last year’s winner was HIRO Technologies’ MycoDigestable™ Diapers, a biodegradable solution driving environmental progress in infant care.

Source:

INDA, Association of the Nonwoven Fabrics Industry

16.07.2025

Closing Military Procurement Loophole in Boost for U.S. Textile Industry

The National Council of Textile Organizations (NCTO), spanning the entire spectrum of U.S. textiles from fiber to finished sewn products, issued a statement today commending the House Armed Services Committee (HASC) for passing the Fiscal Year 2026 National Defense Authorization Act (NDAA), which contains a provision that could boost domestic textile industry sales to the U.S. military. 

The House NDAA bill, which authorizes funding levels and provides authorities for the U.S. military, includes a provision that would eliminate a statutory exemption under the Berry Amendment that acts as a loophole allowing the U.S. military to buy textiles abroad instead of from American textile manufacturers as long as the purchase is at or below a small purchase threshold of $150,000.

The National Council of Textile Organizations (NCTO), spanning the entire spectrum of U.S. textiles from fiber to finished sewn products, issued a statement today commending the House Armed Services Committee (HASC) for passing the Fiscal Year 2026 National Defense Authorization Act (NDAA), which contains a provision that could boost domestic textile industry sales to the U.S. military. 

The House NDAA bill, which authorizes funding levels and provides authorities for the U.S. military, includes a provision that would eliminate a statutory exemption under the Berry Amendment that acts as a loophole allowing the U.S. military to buy textiles abroad instead of from American textile manufacturers as long as the purchase is at or below a small purchase threshold of $150,000.

The NDAA also includes language from the Better Outfitting Our Troops (BOOTS) Act, a bill that NCTO has pushed for as part of a broader coalition. The provision requires the Secretary of Defense to issue regulations within two years that prohibit any member of the Armed Forces from wearing optional combat boots as part of a required uniform unless those boots are made in the United States with American-made components, with a few exceptions.

“We applaud the HASC for passing the FY 2026 NDAA and including provisions that would help boost domestic manufacturing, strengthen American economic competitiveness, and meet the mission-critical needs of our Armed Forces,” said NCTO President and CEO Kim Glas.

“We are sincerely appreciative of the leadership of Congressman Don Davis (D-NC) and Congressman Pat Harrigan (R-NC), who led efforts to close the Berry Amendment loophole and co-sponsored the amendment to the NDAA.

“The Berry Amendment requires the Department of Defense (DOD) to purchase 100% U.S.-made textiles and clothing. But the small-purchase exemption in the statute has led to U.S. military purchases of foreign-made textile articles largely at the expense of American textile manufacturers who have potentially lost several million dollars per year in U.S. government sales.

“Eliminating this exemption will lead to the military procurement of more American-made military textile products as well as oversight of Berry Amendment compliance.  

“Lastly, we also applaud the inclusion of the BOOTS Act in the NDAA, which will support domestic military footwear production. 

“This is a win for the American textile and apparel industry, a key strategic contributor to our national defense that supplies over 8,000 products a year to our men and women in uniform. The industry provides high-tech, functional components for the U.S. government, including more than $1.8 billion worth of vital uniforms and equipment for our armed forces annually.

“It is vital to America’s national security that the U.S. military maintain the ability to source high-quality, innovative textile materials, apparel, and personal equipment from a vibrant American textile industrial base. After passage of the FY 2026 NDAA by the full House, we look forward to working with the Senate and House to ensure this provision is included in the final NDAA conference report.”

Source:

National Council of Textile Organizations

11.07.2025

First ITMA Sustainability Forum at Singapore Expo in October 2025

In response to mounting global regulations and the push for a circular economy, CEMATEX (the European Committee of Textile Machinery Manufacturers) is launching ITMA Sustainability Forum: Accelerating the Green Transition on 30 October at Singapore Expo. 

The half-day forum is designed to help textile and garment manufacturers, particularly from South and Southeast Asia and the Middle East, navigate the European Union’s evolving sustainability regulations, and access to green financing opportunities to support their transition. 

Held alongside ITMA ASIA + CITME, Singapore 2025, the forum brings together EU policymakers, financial institutions, and industry leaders to facilitate cross-border dialogue and knowledge exchange. 

Singapore Fashion Council, the official association for the textile and fashion 
industry in Singapore, is the programme partner of the forum organised by ITMA Services. 

In response to mounting global regulations and the push for a circular economy, CEMATEX (the European Committee of Textile Machinery Manufacturers) is launching ITMA Sustainability Forum: Accelerating the Green Transition on 30 October at Singapore Expo. 

The half-day forum is designed to help textile and garment manufacturers, particularly from South and Southeast Asia and the Middle East, navigate the European Union’s evolving sustainability regulations, and access to green financing opportunities to support their transition. 

Held alongside ITMA ASIA + CITME, Singapore 2025, the forum brings together EU policymakers, financial institutions, and industry leaders to facilitate cross-border dialogue and knowledge exchange. 

Singapore Fashion Council, the official association for the textile and fashion 
industry in Singapore, is the programme partner of the forum organised by ITMA Services. 

Mr Alex Zucchi, President, CEMATEX, said: “Sustainability has become a global priority. The textile industry must act swiftly to modernise production in line with regulatory demands and growing consumer expectations. This forum provides a much-needed platform for manufacturers to better understand the EU’s legislative landscape and the financing tools available for sustainable growth.” 

A key highlight of the forum will be the keynote presentation by Ms Kristin Schreiber, Director, European Commission DG GROW. She will provide a comprehensive overview of the EU’s sustainability roadmap and upcoming regulations driving the shift towards circular textile production.

Ms Schreiber said: “South and Southeast Asia are vital players in the global textile value chain. Many producers in these regions export to the European market, and their ability to align with upcoming requirements will be critical to a successful and inclusive transition. I look forward to exchanging perspectives at this forum on how we can collaborate globally to build a more sustainable and resilient textile industry.”

Under the EU Strategy for Sustainable and Circular Textiles, by 2030, all textiles placed on the EU market must be durable, recyclable, largely made from recycled fibres and free from hazardous substances. Manufacturers worldwide must act now to meet these requirements and remain competitive. 

Programme highlights 

  • Shaping Sustainability: Responding to EU Policy Changes
    Moderator: Ms Nicole van der Elst Desai, Founder, VDE Consultancy 
    Speaker: Mr Robert van de Kerkhof, CEO, ReHubs 
  • Profit Meets Purpose: Financing Sustainability 
    Moderator: Mr Brandon Courban, Senior Advisor (Climate), Openspace Ventures
    Speakers:
    - Dr Rene Van Berkel, Senior Circular Economy Expert, Switch Asia, EU Policy Support Component
    - Ms Iris Ng, Head, Emerging Business & Global Commercial Banking, OCBC Bank
    - Mr Michael Rattinger, Senior Climate Change Specialist, Asian Development Bank
Source:

Cematex 

11.07.2025

First-Ever Conductive Yarn Standard for E-Textile Application

The Global Electronics Association, based in Illinois, announces the release of IPC-8911, Requirements for Conductive Yarns for E-Textiles Applications. This first-of-its-kind global standard establishes a clear framework for classifying, designating, and qualifying conductive yarns—helping to address longstanding challenges in supply chain communication, product testing, and material selection within the growing e-textiles industry. The Global Electronics Association retains the IPC brand for the industry’s standards and certification programs, which are vital to ensure product reliability and consistency. 
 
Developed by the IPC Conductive Yarns for E-Textiles Test Methods Task Group, IPC-8911 defines key yarn categories, introduces a standardized designation system, and includes qualification and conformance requirements tailored to conductive yarns. The standard is supported by eight new IPC-TM-650 Test Methods, designed to evaluate performance characteristics such as conductivity, mechanical durability, and resistance to environmental and chemical exposures.

The Global Electronics Association, based in Illinois, announces the release of IPC-8911, Requirements for Conductive Yarns for E-Textiles Applications. This first-of-its-kind global standard establishes a clear framework for classifying, designating, and qualifying conductive yarns—helping to address longstanding challenges in supply chain communication, product testing, and material selection within the growing e-textiles industry. The Global Electronics Association retains the IPC brand for the industry’s standards and certification programs, which are vital to ensure product reliability and consistency. 
 
Developed by the IPC Conductive Yarns for E-Textiles Test Methods Task Group, IPC-8911 defines key yarn categories, introduces a standardized designation system, and includes qualification and conformance requirements tailored to conductive yarns. The standard is supported by eight new IPC-TM-650 Test Methods, designed to evaluate performance characteristics such as conductivity, mechanical durability, and resistance to environmental and chemical exposures.

By clearly defining the performance characteristics and communication protocols for conductive yarns, IPC-8911 supports faster product development, more consistent sourcing, and improved reliability for all e-textiles product applications, from consumer to medical to aerospace and defense.
 
The release of IPC-8911 marks a critical step in advancing e-textile integration—establishing conductive yarns as true electronic building blocks while supporting better collaboration between yarn suppliers, product developers, and OEMs and brands.

The task group included global experts from both textile and electronics sectors, with leadership from Joe Geiger of Bally Ribbon Mills and Sahar Rostami of Meta.
 
“This standard gives manufacturers tools to know what to ask for when ordering yarns and helps yarn suppliers understand the electrical needs their products must meet,” said Geiger. “It brings clarity to the entire process—acting almost like a recipe for building reliable e-textile systems.”
 
Rostami added, “IPC-8911 eliminates the guesswork. It gives developers, researchers, and engineers a common framework and accelerates R&D by reducing the need to reinvent the wheel when selecting and testing conductive yarns.”

Source:

Global Electronics Association

08.07.2025

SMCCREATE 2025 – November 04th/05th, 2025 in Prague

The third edition of the SMCCREATE conference, organised by AVK and the European Alli-ance for SMC BMC, will take place again in Prague (Vienna House Diplomat Prague), Czech Republic, on November 04th – 05th, 2025. The event brings together international experts to discuss the latest developments and applications in the field of SMC/BMC.

SMC and BMC – Innovative materials for modern designs
SMC (sheet moulding compound) and BMC (bulk moulding compound) are high-performance fibre composites that are particularly suitable for the manufacture of light-weight, complex-shaped components – they combine structural properties with a smooth surface. For this reason, SMC and BMC are increasingly being used in a wide range of end applications and markets.

The third edition of the SMCCREATE conference, organised by AVK and the European Alli-ance for SMC BMC, will take place again in Prague (Vienna House Diplomat Prague), Czech Republic, on November 04th – 05th, 2025. The event brings together international experts to discuss the latest developments and applications in the field of SMC/BMC.

SMC and BMC – Innovative materials for modern designs
SMC (sheet moulding compound) and BMC (bulk moulding compound) are high-performance fibre composites that are particularly suitable for the manufacture of light-weight, complex-shaped components – they combine structural properties with a smooth surface. For this reason, SMC and BMC are increasingly being used in a wide range of end applications and markets.

Application-oriented content for the areas of design and development
SMCCREATE will once again offer a compact and high-quality program in 2025:
Over the course of one and a half days, leading companies and research institutions such as AOC, Owens Corning, Menzolit and TU Delft will present the latest findings, best prac-tices and innovative solutions relating to the use of SMC and BMC in modern construction processes.
Participants can look forward to a total of 15 presentations on the topics of market & trends, sustainability and design.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V. (

07.07.2025

Italian Textile Machinery: 2024 marked by challenges and a light slowdown

Enhancing the value of Made in Italy must be placed at the heart of the challenges facing the Italian textile machinery industry in the coming years. This was the message emphasized by Marco Salvadè, President of ACIMIT, the Association of Italian Textile Machinery Manufacturers, during the General Assembly, held on Friday, 4 July, at the Ferrari Museum in Maranello. Presenting the latest industry figures, Salvadè reported that in 2024 production fell by 8% compared to 2023, amounting to €2.1 billion, while exports declined by 9% (€1.8 billion).

These results are set against a fragile international scenario, with similar trends observed by the main competitors of Italian manufacturers too. China, Turkey, India, and the United States remained the primary export destinations for Italian textile machinery in 2024, despite a persistently weak demand. The first months of 2025 have opened under the same sign of uncertainty.

Enhancing the value of Made in Italy must be placed at the heart of the challenges facing the Italian textile machinery industry in the coming years. This was the message emphasized by Marco Salvadè, President of ACIMIT, the Association of Italian Textile Machinery Manufacturers, during the General Assembly, held on Friday, 4 July, at the Ferrari Museum in Maranello. Presenting the latest industry figures, Salvadè reported that in 2024 production fell by 8% compared to 2023, amounting to €2.1 billion, while exports declined by 9% (€1.8 billion).

These results are set against a fragile international scenario, with similar trends observed by the main competitors of Italian manufacturers too. China, Turkey, India, and the United States remained the primary export destinations for Italian textile machinery in 2024, despite a persistently weak demand. The first months of 2025 have opened under the same sign of uncertainty.

“U.S. protectionist policies and mounting geopolitical instability risk further slowing global investments in the textile and apparel sector,” commented Salvadè. “In particular, any escalation of the trade war would prove even more damaging to the entire supply chain.”

The protection of authentic Made in Italy is regarded as an urgent priority by the Association. The experience of our workforce, creativity, and an unwavering drive for innovation remain the cornerstones of our success. “It is therefore essential,” Salvadè reaffirmed, “to defend and promote true Made in Italy—products designed and manufactured in Italy without compromise, distinguished by the quality and creativity for which we are renowned worldwide.”

The Assembly also celebrated ACIMIT’s 80th anniversary. “An important milestone that invites us to look back with pride and ahead with renewed passion and responsibility,” the ACIMIT President emphasized. Trade tensions and regional conflicts have reshaped international equilibria, directly impacting corporate strategies. The Italian textile machinery industry, with its strong export orientation, is particularly exposed to these dynamics. While it continues to hold a leading position on the global stage, it must question whether its traditional formula, based on innovation and internationalization, remains fully adequate.

These themes were the focus of the roundtable discussion held during the public session of the Assembly, addressing three key topics for the future of the sector: internationalization, innovation, and sustainability. Participants agreed on the strategic importance of enhancing Made in Italy to boost the competitiveness of Italian companies. The future of Italy’s textile machinery sector cannot forgo a continued drive for innovation, capable of delivering sustainable solutions with low environmental impact while also reducing production costs.  The debate further highlighted the crucial need to consolidate the presence in international markets, both mature and emerging, through initiatives that can strengthen the global leadership of Italian-made machinery.

More information:
ACIMIT Italy export
Source:

ACIMIT

Final meeting in Terrassa – group photo with partners: All goals of the AddTex project have been achieved! Photo (c) IVGT/AddTex
04.07.2025

Europe's textile industry is becoming more digital and sustainable

From 25 to 26 June 2025, the final meeting of the ERASMUS+ project AddTex took place in Terrassa, Spain, which aimed to train workers, pupils and students in the textile industry. Over a period of three years, eleven partners from Greece, Ireland, Italy, Portugal, Romania, Sweden, Slovenia, Spain, the Czech Republic and the IVGT association for Germany were involved in the project.

With hackathons, virtual internships and 45 freely accessible MOOCs, AddTex set new standards in training and further education in the textile industry. The online platform www.addtex.eu provides professionals with the latest insights into green, digital and smart textiles – in a practical and free format. 

AddTex.eu online platform
All the project goals were achieved. The partners developed innovative formats such as summer schools, back-to-school programmes, coaching services and masterclasses. The 45 massive open online courses (MOOCs) on the AddTex.eu platform offer explanatory videos and learning materials as downloadable PDFs, each tailored to the three main target groups: technicians, engineers and managers.

From 25 to 26 June 2025, the final meeting of the ERASMUS+ project AddTex took place in Terrassa, Spain, which aimed to train workers, pupils and students in the textile industry. Over a period of three years, eleven partners from Greece, Ireland, Italy, Portugal, Romania, Sweden, Slovenia, Spain, the Czech Republic and the IVGT association for Germany were involved in the project.

With hackathons, virtual internships and 45 freely accessible MOOCs, AddTex set new standards in training and further education in the textile industry. The online platform www.addtex.eu provides professionals with the latest insights into green, digital and smart textiles – in a practical and free format. 

AddTex.eu online platform
All the project goals were achieved. The partners developed innovative formats such as summer schools, back-to-school programmes, coaching services and masterclasses. The 45 massive open online courses (MOOCs) on the AddTex.eu platform offer explanatory videos and learning materials as downloadable PDFs, each tailored to the three main target groups: technicians, engineers and managers.

A highlight of the closing event on 26 June 2025, which was jointly organised by AddTex and the EU project xBUILD-EU under the motto ‘Textile Talent & Innovation: Driving Tomorrow's Industry’, was the interactive session ‘New Generations in the Labour Market’, including the speed dating event ‘Talent meets Industry’. The event brought together companies, students and experts for an intensive exchange and networking day in Terrassa.

The AddTex.eu platform will be continuously developed over the next five years by the IVGT Technical Textiles Department together with the project partners in order to provide up-to-date content and act as a point of contact for industry and universities. In addition to instructions for creating your own MOOCs, hackathons and webinars, new soft skills and formats such as back-to-school programmes and solution-oriented consulting have been developed and implemented by project hubs.

A collaboration with the Chair of Textile Technology at Chemnitz University of Technology and the Texoversum Experts & Training Hub in Reutlingen is currently planned to supplement the project results. In addition to the three EU priority areas of ‘Green – Digital – Smart’, the focus is also on textile recycling and digitisation and AI topics in order to provide IVGT members with targeted information, training materials and network contacts.

The IVGT was most recently responsible for work package 5, ‘Qualification of the textile industry through ADDTEX hubs for green-digital-smart,’ as well as for the creation of an application manual and a business plan to ensure that the project content is updated for at least five years after the end of the project.

More information:
IVGT addtex.eu ADDTEX Training
Source:

IVGT/AddTex

WIPPES Act passes U.S. House of Representatives Graphic by INDA
27.06.2025

WIPPES Act passes U.S. House of Representatives

INDA, the Association of the Nonwoven Fabrics Industry, applauds the U.S. House of Representatives for passing the Wastewater Infrastructure Pollution Prevention and Environmental Safety (WIPPES) Act (H.R. 2269). The WIPPES Act, which creates national standards for “Do Not Flush” labeling for non-flushable wipes, passed out of the House Committee on Energy and Commerce in December of 2023, and today it cleared the House floor in a voice vote. The Senate version of the bill (S. 1092) advanced out of the Senate Science, Commerce, and Energy Committee.

This bipartisan legislation is intended to address the growing problem of sewer system clogs caused by improper disposal of consumer wipes that are not intended to be disposed of in toilets. This federal solution is the result of a years-long industry collaboration with wastewater operators, which has resulted in the passage of similar legislation in seven states. The WIPPES Act will create a national standard based on existing state laws to ensure non-flushable wipes will carry prominent “Do Not Flush” labeling on packaging.

INDA, the Association of the Nonwoven Fabrics Industry, applauds the U.S. House of Representatives for passing the Wastewater Infrastructure Pollution Prevention and Environmental Safety (WIPPES) Act (H.R. 2269). The WIPPES Act, which creates national standards for “Do Not Flush” labeling for non-flushable wipes, passed out of the House Committee on Energy and Commerce in December of 2023, and today it cleared the House floor in a voice vote. The Senate version of the bill (S. 1092) advanced out of the Senate Science, Commerce, and Energy Committee.

This bipartisan legislation is intended to address the growing problem of sewer system clogs caused by improper disposal of consumer wipes that are not intended to be disposed of in toilets. This federal solution is the result of a years-long industry collaboration with wastewater operators, which has resulted in the passage of similar legislation in seven states. The WIPPES Act will create a national standard based on existing state laws to ensure non-flushable wipes will carry prominent “Do Not Flush” labeling on packaging.

“INDA has championed this legislation for the past two years, and we are encouraged to see it pass out of the House for the consecutive Congress. With the Senate Commerce Committee having advanced the Senate version of the bill last month, we now have more momentum behind this legislation than ever. We extend our thanks to the bill sponsors, our industry and wastewater partners, and INDA members as we take another step forward to make “Do Not Flush” labeling nationwide,” said Wes Fisher, Director of Government Affairs.

The WIPPES Act lead sponsors in the House are Representative Lisa McClain (R-MI) and Representative Kevin Mullin (D-CA), and the bill was introduced in the Senate by Senator Jeff Merkley (D-OR) and Senator Susan Collins (R-ME).

Source:

INDA

OUTLOOK™ Photo Edana
26.06.2025

EDANA’s OUTLOOK™ 2025: Budapest is calling

EDANA announced that preparations are well underway for OUTLOOK™ 2025. So far, hundreds of participants from more than 50 companies have signed up, confirming strong interest in this year’s edition. The exhibition area is filling up quickly: 12 booths are already sold, with just eight remaining.

The comprehensive three-day programme will explore the latest trends in AHPs, compliance and competitiveness, and dedicated sessions on wipes and start-ups, with renowned speakers and interactive formats designed to spark dialogue and collaboration. 

This year’s keynote speakers are: Ambassador Ivo H. Daalder, former U.S. Ambassador to NATO and President of the Chicago Council on Global Affairs. At OUTLOOK™, he’ll explore how shifting global alliances are reshaping international trade and what this means for business. Drawing on decades of diplomatic experience, he’ll offer strategic insights into navigating today’s evolving geopolitical and economic landscape. 

EDANA announced that preparations are well underway for OUTLOOK™ 2025. So far, hundreds of participants from more than 50 companies have signed up, confirming strong interest in this year’s edition. The exhibition area is filling up quickly: 12 booths are already sold, with just eight remaining.

The comprehensive three-day programme will explore the latest trends in AHPs, compliance and competitiveness, and dedicated sessions on wipes and start-ups, with renowned speakers and interactive formats designed to spark dialogue and collaboration. 

This year’s keynote speakers are: Ambassador Ivo H. Daalder, former U.S. Ambassador to NATO and President of the Chicago Council on Global Affairs. At OUTLOOK™, he’ll explore how shifting global alliances are reshaping international trade and what this means for business. Drawing on decades of diplomatic experience, he’ll offer strategic insights into navigating today’s evolving geopolitical and economic landscape. 

Networking will take centre stage with two special evening cocktails planned. The first, a thematic cocktail, will take place in the exhibition area on Day 1, encouraging relaxed exchanges among participants. On Day 2, attendees will enjoy a memorable external cocktail held at one of Budapest’s most iconic venues, offering a unique cultural touch to the event experience. 

Sponsorship opportunities are also available for companies looking to stand out and boost their brand visibility throughout the event! These options provide exclusive exposure before and during the event, both online and onsite. 

More information:
Edana OUTLOOK™ Conference
Source:

Edana

Svegea EC 200 system in situ at Interstoff Apparels Photo AWOL Media
Svegea EC 200 system in situ at Interstoff Apparels
23.06.2025

Interstoff opts for advanced Svegea colarette systems

Svegea – a member of TMAS, the Swedish textile machinery association – has delivered six of its EC 200 automatic collarette machines to the Bangladesh-based Interstoff Group in the past 12 months.

Interstoff, which belongs to the Pandughar Group, was founded in 2000 as a modest garment factory with just 62 sewing machines.

Today its three divisions – Interstoff Apparels, Interstoff Clothing and South East Textile – have a combined workforce of over 10,000 people, producing around 72 million fully finished and packaged garments each year.

Interstoff is further equipped with the very latest knitting and dyeing and finishing machinery sourced from Europe and Japan to enable a daily production capacity of 30,000 kg of fabrics. Through continuous innovation in yarns and processes, the company’s fabrics consistently earn recognition for their environmental responsibility and quality. Its fabric laboratory is certified by leading brands such as H&M, M&S, Sainsbury’s and Tesco.

Svegea – a member of TMAS, the Swedish textile machinery association – has delivered six of its EC 200 automatic collarette machines to the Bangladesh-based Interstoff Group in the past 12 months.

Interstoff, which belongs to the Pandughar Group, was founded in 2000 as a modest garment factory with just 62 sewing machines.

Today its three divisions – Interstoff Apparels, Interstoff Clothing and South East Textile – have a combined workforce of over 10,000 people, producing around 72 million fully finished and packaged garments each year.

Interstoff is further equipped with the very latest knitting and dyeing and finishing machinery sourced from Europe and Japan to enable a daily production capacity of 30,000 kg of fabrics. Through continuous innovation in yarns and processes, the company’s fabrics consistently earn recognition for their environmental responsibility and quality. Its fabric laboratory is certified by leading brands such as H&M, M&S, Sainsbury’s and Tesco.

Two Svegea collarette machines have now been commissioned at each of the three Interstoff divisions for the high speed production of tubular apparel components such as cuffs, collars and neck tapes.

Interstoff chose the EC 200 machines over the faster EC 300 model primarily because some of its fabrics include seams. The faster crush-cutting knife system in Svegea’s EC 300 series can struggle with multiple fabric layers or seams stitched with polyester thread, since it cuts by pressure rather than slicing. By contrast, the EC 200 uses scissor-action knives – two sharp circular blades with a slight overlap – which function like scissors and handle seams without issue.

The machines run directly from turntables at speeds of up to 40 metres per minute, depending on the fabric width, material properties and optimal settings. They are equipped with Svegea’s standard drive system in an electronic master/slave configuration. Each machine has been specially equipped with a third knife set, enabling the simultaneous cutting of up to three bands. This means that total output in linear metres per minute can be significantly higher when cutting multiple bands in parallel.

Svegea will be demonstrating both semi- and fully-automatic cutting machines at ITMA Asia + CITME from October 28-31.

Source:

Issued on behalf of TMAS by AWOL Media

2025 World of Wipes Innovation Award® Finalists Graphic: Inda
23.06.2025

INDA announces 2025 World of Wipes Innovation Award® Finalists

INDA, the Association of the Nonwoven Fabrics Industry, has announced that eco-friendly wipes developed by Cookware Care, Dude Products Inc., and Magnera have been selected as the finalists for the 2025 World of WipesInnovation Award®, honoring advances in sustainable materials and next-generation wipe performance.

INDA’s Technical Advisory Board selected the finalists for their creativity, distinctiveness, and technical excellence in advancing nonwoven applications across the value chain, including innovations in raw materials, roll goods, converting, packaging, active ingredients, binders, additives, and end-use performance.

The three standout products competing for the award are Cookware Care’s Seasoning Wipes™, Dude Products’ DUDE Odor Destroyer XL Flushable Deodorant Wipes, and Magnera’s Sontara EC® Green Cotton.

The companies will showcase their products at the World of Wipes® (WOW) International Conference, July 21-24, at the Hilton Columbus Downtown in Columbus, Ohio. The winner will be announced during the closing session on July 24.

INDA, the Association of the Nonwoven Fabrics Industry, has announced that eco-friendly wipes developed by Cookware Care, Dude Products Inc., and Magnera have been selected as the finalists for the 2025 World of WipesInnovation Award®, honoring advances in sustainable materials and next-generation wipe performance.

INDA’s Technical Advisory Board selected the finalists for their creativity, distinctiveness, and technical excellence in advancing nonwoven applications across the value chain, including innovations in raw materials, roll goods, converting, packaging, active ingredients, binders, additives, and end-use performance.

The three standout products competing for the award are Cookware Care’s Seasoning Wipes™, Dude Products’ DUDE Odor Destroyer XL Flushable Deodorant Wipes, and Magnera’s Sontara EC® Green Cotton.

The companies will showcase their products at the World of Wipes® (WOW) International Conference, July 21-24, at the Hilton Columbus Downtown in Columbus, Ohio. The winner will be announced during the closing session on July 24.

Presented annually, the World of Wipes Innovation Award recognizes breakthroughs in nonwoven product design and application. It celebrates innovation across the entire wipes supply chain, highlighting advancements in raw materials, fibers, technology, and functionality that enhance the utility and sustainability of nonwovens.

The 2025 Award finalists are:

  • Seasoning Wipes™ offer a simple, convenient, mess-free solution for maintaining cast iron and carbon steel cookware. Made from 100 percent viscose and infused through a proprietary process using a combination of non-petrochemical oils and beeswax, the formula contains no water, emulsifiers, or synthetic additives. The wipes streamline and simplify traditional maintenance with a cleaner, more consistent solution. Seasoning Wipes™ sets a new standard for cookware maintenance while expanding the possibilities of nonwovens beyond traditional applications.
  • DUDE Odor Destroyer XL Flushable Deodorant Wipes utilize powerful, long-lasting technology to capture and eliminate the compounds that cause body odor (including fecal odor), rather than just masking them. These wipes are proven to neutralize odor instantly and reduce it for up to 24 hours on skin, fabric, and in the air. Made with plant-based fibers, aloe vera, and vitamin E, the hypoallergenic wipes, infused with a sea mineral scent, redefine personal hygiene and modern cleanliness.
  • Sontara EC® Green Cotton wipes advance sustainable precision cleaning with natural pure performance. Made from a proprietary blend of 100 percent naturally derived, biodegradable fibers—including pure unbleached TruCotton™ and sustainably sourced wood pulp—these innovative nonwoven wipes deliver superior absorbency, low lint, and a visibly natural aesthetic, perfect for industrial and critical cleaning environments demanding both technical excellence and environmental responsibility.
Source:

INDA

Istanbul Photo Unsplash
19.06.2025

Turkey wants to be included in the EU's free trade agreements with third countries

At the event titled "The Transformation Journey of the Turkish Apparel Industry," coordinated by the Istanbul Apparel Exporters’ Association (İHKİB), Mustafa Gültepe, Chairman of the Turkish Exporters Assembly (TİM), delivered a speech. In order to strengthen their competitiveness, the Customs Union should be updated without further delay.

Mustafa Gültepe: The Customs Union in its current form is limiting rather than supporting our cooperation. We would like the ongoing technical contacts to be completed as soon as possible. Because we know that permanent competitive advantage in the EU market can only be possible with the full modernization of the Customs Union.

Mustafa Gültepe, Chairman of the Turkish Exporters Assembly (TİM), said that the Customs Union between the European Union (EU) and Türkiye in its current form has a limiting effect rather than supporting cooperation between the parties.

Gültepe, who also holds the position of Chairman of the Istanbul Apparel Exporters’ Association (İHKİB), underlined that a permanent competitive edge in the EU market can only be attained through the full and comprehensive modernization of the Customs Union.

At the event titled "The Transformation Journey of the Turkish Apparel Industry," coordinated by the Istanbul Apparel Exporters’ Association (İHKİB), Mustafa Gültepe, Chairman of the Turkish Exporters Assembly (TİM), delivered a speech. In order to strengthen their competitiveness, the Customs Union should be updated without further delay.

Mustafa Gültepe: The Customs Union in its current form is limiting rather than supporting our cooperation. We would like the ongoing technical contacts to be completed as soon as possible. Because we know that permanent competitive advantage in the EU market can only be possible with the full modernization of the Customs Union.

Mustafa Gültepe, Chairman of the Turkish Exporters Assembly (TİM), said that the Customs Union between the European Union (EU) and Türkiye in its current form has a limiting effect rather than supporting cooperation between the parties.

Gültepe, who also holds the position of Chairman of the Istanbul Apparel Exporters’ Association (İHKİB), underlined that a permanent competitive edge in the EU market can only be attained through the full and comprehensive modernization of the Customs Union.

The event titled “The Transformation Journey of the Turkish Apparel Industry,” organized by the Istanbul Apparel Exporters’ Association (İHKİB), brought together exporters, international brands, industry professionals and experts.
In his opening remarks, Mustafa Gültepe emphasized that the apparel industry is among Türkiye’s most vital sectors, thanks to its high value-added production, employment generation, and export performance.

Highlighting the European Union as a strategic market for the Turkish apparel sector, Gültepe continued as follows:

TÜRKİYE should be included in the EU'S FTAs with third countries
“We export approximately 70 percent of our apparel products to Europe. We hold a strong position in many European markets, particularly in Germany, Spain, and the Netherlands. Our strategic advantage as a nearshore supplier further reinforces our competitive standing. However, we are aware that in the medium and long term, these advantages alone will not be sufficient.

With this awareness, we are determined to accelerate our twin transformation—digital and green. We are effectively utilizing EU funds to support this transition. To date, we have secured a total of 37 million euros in grant funding from the EU for our completed and ongoing projects. 

Today, in areas such as recycling, carbon footprint reduction, digitalization, and social compliance, we have reached—or even surpassed—European standards. I have no doubt that we will successfully complete the twin transformation.

Find attached the full press release of the Istanbul Apparel Exporters’ Association (İHKİB).

Source:

Istanbul Apparel Exporters’ Association (İHKİB)

EDANA Innovation Forum Photo EDANA
EDANA Innovation Forum
18.06.2025

EDANA Innovation Forum 2025: Serendipity, AI and Circularity

EDANA’s Innovation Forum 2025, held on 11–12 June in Station F, Paris, brought together a vibrant cross-section of industry leaders, researchers, startups and innovation experts to explore the dynamic evolution of the nonwovens sector. With a rich two-day agenda that combined high-level keynote addresses, thematic sessions, research showcases and networking events, the Forum served as a hub for ideation, collaboration and inspiration around the sector’s most urgent challenges and exciting opportunities. 
 
“Innovation is a key factor to stay competitive — but more than that, it’s the foundation for resilience and long-term relevance. By embedding sustainability, digitalization and collaboration into the core of our innovation culture, we’re not just keeping pace with change — we’re shaping the future of our industry.” said EDANA General Manager Murat Dogru in his opening address. 
 

EDANA’s Innovation Forum 2025, held on 11–12 June in Station F, Paris, brought together a vibrant cross-section of industry leaders, researchers, startups and innovation experts to explore the dynamic evolution of the nonwovens sector. With a rich two-day agenda that combined high-level keynote addresses, thematic sessions, research showcases and networking events, the Forum served as a hub for ideation, collaboration and inspiration around the sector’s most urgent challenges and exciting opportunities. 
 
“Innovation is a key factor to stay competitive — but more than that, it’s the foundation for resilience and long-term relevance. By embedding sustainability, digitalization and collaboration into the core of our innovation culture, we’re not just keeping pace with change — we’re shaping the future of our industry.” said EDANA General Manager Murat Dogru in his opening address. 
 
Speakers explored how textile waste can become high-value products, how fibrelevel modelling replaces costly prototyping, and how AI enables more autonomous and sustainable manufacturing. “Nonwovens are robust and can tolerate stress. This gives an opportunity in the recycling textile to tackle the textile tsunami.” - Maria Ström, CEO of The Loop Factory. 
 
The Forum also welcomed nature-powered innovations set to transform the fibre landscape. “What if we made fibres from agricultural waste? Natural fibres are extraordinary, and we wouldn’t even have to use the leaves that are grown, but the ones already on the ground and that are now considered waste.” - Dr. Carmen Hijosa, Founder & Creative Director of Ananas Anam. 
 
The afternoon turned its spotlight on research institutes from across Europe, examining how their strategic priorities align with industry needs. “It is crucial that people in the nonwovens industry understand what’s going on on the other side of the fence and to understand what R&D people are doing”, said Matthew Tipper, CEO of Nonwovens Innovation & Research Institute (NIRI). “We need collaboration between the real needs of the industry and research institutes.” 
 
Towards the end of the first day, the EDANA Innovation Forum featured a workshop on capturing serendipity. “Not all progress is planned”, said Dieter Eichinger, CEO & Founder of Eichinger. “Some of the most transformative ideas are born from surprises, and we need to make space for it to imagine the imaginable”. 
 
The first day ended with a cocktail dinner aboard the Excellence, gliding through the heart of Paris on the River Seine, admiring the beauty of the City of Light and its stunning views of the Eiffel Tower. 
 
Day two began with a provocative and practical keynote on AI as a creative partner in product development. “AI doesn’t replace creativity,” said Oliver Breucker, CoCEO & AI Consultant at Roover Consulting. “It amplifies it. It clears space for us to think bigger, iterate faster, and design better — with the customer always at the centre.” 
 
Moreover, sustainable innovation is no longer confined to early-stage R&D. From fibre-based packaging to carbon-zero superabsorbents, speakers showcased products ready to hit the market, each with compelling environmental and commercial benefits. “It’s not about choosing between performance and sustainability anymore,” said Alexandros Skouras, Director of Hygiene Sector at Paptic. “The next generation of materials offers both.” 
 
The forum also invited Walter Johnsen, Venture Science Associate at Marble Studio, who offered a strategic lens on how deep-tech entrepreneurship can fast-track climate progress. In addition, four startups took the stage to showcase how they’re transforming diapers, textiles, fashion and chemical processes. “Innovation is not about making things slightly better,” said Miki Agrawal of Hiro Technologies. “It’s about asking: what if we start completely differently and solve the root problem instead of patching the old one?” 
 
To end the second day, Maxime Guillaud, CEO of INSKIP, mapped out how startups and ecosystems are evolving — and what the nonwovens industry can learn from other sectors. “Innovation doesn’t just come from technology — it comes from how we organise people and capital around ideas,” said Maxime. “That’s where ecosystems matter.” The event concluded with a guided visit to Station F, the world’s largest startup campus, reinforcing the importance of ecosystems in scaling transformative ideas. 
 
EDANA extended its heartfelt thanks to all speakers, moderators, partners and participants whose energy and insight made the Forum such a success. The connections made in Paris will continue to drive meaningful progress in the months and years ahead! 

Source:

Edana

17.06.2025

Italian's Textile Machinery Association at Milano Unica

At the next edition of Milano Unica, the leading international trade fair for high-end fabrics and accessories, scheduled to take place at Rho Fiera Milano from July 8 to 10, ACIMIT (the Association of Italian Textile Machinery Manufacturers) will participate for the first time with an institutional booth.

Through this initiative, ACIMIT aims to foster connections between its member companies, exhibitors, and buyers attending Milano Unica, while also promoting greater awareness of the cutting-edge technological solutions that define the Italian textile machinery industry—particularly in the areas of sustainability, circular economy, and digitalization.

Marco Salvadè, President of ACIMIT: “I believe it is essential for our Association to be present at such a significant trade event. The synergy between Italian excellence in textiles and textile machinery has always been, and continues to be, a key factor in strengthening the leadership of the entire Italian textile supply chain.”

At the next edition of Milano Unica, the leading international trade fair for high-end fabrics and accessories, scheduled to take place at Rho Fiera Milano from July 8 to 10, ACIMIT (the Association of Italian Textile Machinery Manufacturers) will participate for the first time with an institutional booth.

Through this initiative, ACIMIT aims to foster connections between its member companies, exhibitors, and buyers attending Milano Unica, while also promoting greater awareness of the cutting-edge technological solutions that define the Italian textile machinery industry—particularly in the areas of sustainability, circular economy, and digitalization.

Marco Salvadè, President of ACIMIT: “I believe it is essential for our Association to be present at such a significant trade event. The synergy between Italian excellence in textiles and textile machinery has always been, and continues to be, a key factor in strengthening the leadership of the entire Italian textile supply chain.”

More information:
ACIMIT Milano Unica
Source:

ACIMIT

Monterey Textiles: Innovation Award for Sustainability Photo Network Association of Uniform Manufacturers and Distributors (NAUMD)
12.06.2025

Monterey Textiles: Innovation Award for Sustainability

Monterey Textiles developed ECO-FYRE, an innovative recycled aramid fabric designed for the gas and oil industry. This sustainable solution tackles the growing problem of uniform waste sent to landfills by recycling soiled garments back into fiber form. Blended with virgin aramids, the fabric delivers superior flash fire protection, color fastness, and comfort while supporting environmental responsibility. Extensive lab testing and wear trials confirmed the fabric’s performance in harsh conditions without sacrificing safety or durability. 

ECO-FYRE offers a closed-loop recycling model that reduces manufacturing waste, minimizes environmental impact, and supports companies focused on sustainability—delivering both protection for workers and meaningful progress for the planet. Moreover, the integration of this technology has also allowed for a more efficient production cycle, helping Monterey Textiles offer competitive pricing without compromising quality.

Monterey Textiles developed ECO-FYRE, an innovative recycled aramid fabric designed for the gas and oil industry. This sustainable solution tackles the growing problem of uniform waste sent to landfills by recycling soiled garments back into fiber form. Blended with virgin aramids, the fabric delivers superior flash fire protection, color fastness, and comfort while supporting environmental responsibility. Extensive lab testing and wear trials confirmed the fabric’s performance in harsh conditions without sacrificing safety or durability. 

ECO-FYRE offers a closed-loop recycling model that reduces manufacturing waste, minimizes environmental impact, and supports companies focused on sustainability—delivering both protection for workers and meaningful progress for the planet. Moreover, the integration of this technology has also allowed for a more efficient production cycle, helping Monterey Textiles offer competitive pricing without compromising quality.

General Recycled® (GR) stated that its patented aramid recycling technology played a pivotal role in the development of Monterey Textiles' new Eco-Fyre® fabric, which was honored with the Innovation Award for Sustainability at the 2025 Network Association of Uniform Manufacturers and Distributors (NAUMD) annual conference.

"Monterey's success with Eco-Fyre® underscores the value and potential of our patented recycling process," said Ted Parker, President of General Recycled. "Partnering with Monterey and Filspec to bring this sustainable solution to market has been incredibly rewarding. This recognition highlights the growing industry demand for circular, closed-loop innovations in flame-resistant textiles."

Source:

Network Association of Uniform Manufacturers and Distributors (NAUMD) et. al.

11.06.2025

INDA and EDANA Boards Approve Formation of the Global Nonwoven Alliance

The Boards of Directors of INDA and EDANA have officially approved the formation of the Global Nonwoven Alliance (GNA) and have concurrently agreed to become its founding members. Both Boards have also approved a motion authorizing each organization to appoint six representatives from each founding organization – current chair and 5 additional representatives. 

This move marks a major milestone in the collaborative vision outlined in the organizations’ jointly signed Letter of Intent from September 2024. The Board votes follow extensive planning and consultation and includes the recommendation to formally establish GNA as a non-profit association under the laws of the United States. 

By aligning strategic resources and deepening collaboration, the GNA will provide a unified and coordinated approach to the key opportunities and challenges facing the global nonwovens industry. The Alliance is designed to accelerate innovation, improve operational efficiency, expand international reach, and foster long-term industry growth—all while strengthening the services and support delivered to members at both regional and global levels. 

The Boards of Directors of INDA and EDANA have officially approved the formation of the Global Nonwoven Alliance (GNA) and have concurrently agreed to become its founding members. Both Boards have also approved a motion authorizing each organization to appoint six representatives from each founding organization – current chair and 5 additional representatives. 

This move marks a major milestone in the collaborative vision outlined in the organizations’ jointly signed Letter of Intent from September 2024. The Board votes follow extensive planning and consultation and includes the recommendation to formally establish GNA as a non-profit association under the laws of the United States. 

By aligning strategic resources and deepening collaboration, the GNA will provide a unified and coordinated approach to the key opportunities and challenges facing the global nonwovens industry. The Alliance is designed to accelerate innovation, improve operational efficiency, expand international reach, and foster long-term industry growth—all while strengthening the services and support delivered to members at both regional and global levels. 

Under the GNA framework, INDA and EDANA will continue to operate as independent legal entities, maintaining their regional focus and advocacy efforts. As founding members, however, both organizations will participate in aligning leadership, staffing, and programmatic initiatives to advance shared objectives and cross-border priorities. 

In the immediate term, INDA and EDANA will focus on laying a strong foundation for GNA, including establishing the organization and solidifying its governance structure. Looking ahead, Allied Membership is expected to be open to any not-for-profit trade, industry, or professional association whose mission aligns with that of the founding members—offering an inclusive platform for broader collaboration across the global nonwovens value chain.

“The formation of GNA is a milestone for our industry. By working together across regions, we can accelerate innovation, speak with a stronger voice globally, and deliver even greater value to our members,” said Tony Fragnito, President of INDA. “This is not a merger—it’s a strategic alliance built on mutual respect and a shared commitment to the future of nonwovens.” 

“With the creation of GNA, we are positioning the nonwovens industry to meet global challenges with greater unity and impact,” said Murat Dogru, General Manager of EDANA. “This collaborative structure allows us to scale our efforts, strengthen our influence, and pursue solutions that benefit our members worldwide.” 

GNA will be governed by a Board composed of six members from each founding organization –five appointed representatives plus the current Chair–, ensuring balanced representation and a regional perspective. This governance structure will promote transparency, long-term strategic alignment, and organizational stability while guiding shared policies, priorities, and programs.

Source:

Edana 

Nonwovens industry takes a stand against NGO report Graphic by Edana
05.06.2025

Nonwovens industry takes a stand against NGO report

EDANA, the global association for the nonwovens and related industries, together with the Absorbent Hygiene Product Manufacturers Association (AHPMA) in the UK, the Center for Baby and Adult Hygiene Products (BAHP), and the Association of the Nonwoven Fabrics Industry (INDA) in the US, is addressing a recent NGO report claiming to have detected trace levels of glyphosate in a single box of tampons.

The report’s comprehensive results have not been published, and the available details are minimal. The report is limited in scale, stating that “just 15 boxes” of tampons were tested. Its main claim centres on a finding in “one of the boxes”, without clarifying whether it was present in just one tampon or throughout the box. We would welcome the test data being shared so that we could examine and understand the results.

The authors also state that the detected trace levels of glyphosate are 40 times higher than those permitted in drinking water, with their finding being 0.004 mg/kg. EDANA’s Stewardship Programme sets a guidance value of 0,5mg/kg for pesticides. The traces found in the NGO report are therefore 125 times lower than this industry guidance value.

EDANA, the global association for the nonwovens and related industries, together with the Absorbent Hygiene Product Manufacturers Association (AHPMA) in the UK, the Center for Baby and Adult Hygiene Products (BAHP), and the Association of the Nonwoven Fabrics Industry (INDA) in the US, is addressing a recent NGO report claiming to have detected trace levels of glyphosate in a single box of tampons.

The report’s comprehensive results have not been published, and the available details are minimal. The report is limited in scale, stating that “just 15 boxes” of tampons were tested. Its main claim centres on a finding in “one of the boxes”, without clarifying whether it was present in just one tampon or throughout the box. We would welcome the test data being shared so that we could examine and understand the results.

The authors also state that the detected trace levels of glyphosate are 40 times higher than those permitted in drinking water, with their finding being 0.004 mg/kg. EDANA’s Stewardship Programme sets a guidance value of 0,5mg/kg for pesticides. The traces found in the NGO report are therefore 125 times lower than this industry guidance value.

Moreover, comparing levels in tampons to drinking water overlooks a crucial point: the nature of exposure. While individuals typically consume around 2 litres of water daily, a tampon is used only a few times per month and remains in contact with the body for only a few hours at a time. As such, the comparison is misleading and disproportionate.

The health and safety of consumers is the foremost, non-negotiable commitment of our industry. EDANA's voluntary Stewardship Programme for Absorbent Hygiene Products (AHP’s), with its core component—the CODEX™—exemplifies the industry's proactive commitment to safety, consumer confidence, and transparency.

The CODEX™ establishes stringent guidance values for a list of trace chemicals. It goes beyond current EU and national legislative requirements, showcasing a commitment to best practices. It also incorporates standardized, consumer-relevant test methods[1]—further ensuring that millions of individuals can use AHPs with confidence every day.

Consumers can be assured that tampons are a safe way of managing their period. Our associations reiterate their full confidence in the safety of tampons, built on decades of safe use, rigorous testing, regulatory compliance and proactive industry stewardship.

More information:
Edana NGO tampon hygiene market
Source:

Edana

İHKİB and Bilişim Vadisi Join Forces for the Turkish Apparel Industry Photo Istanbul Apparel Exporters’ Association (İHKİB)
04.06.2025

İHKİB and Bilişim Vadisi Join Forces for the Turkish Apparel Industry

Istanbul Apparel Exporters’ Association (İHKİB) and Bilişim Vadisi -Technology Development Zone (Informatics Valley) have signed a Cooperation Protocol to enhance the competitiveness of the Turkish apparel industry in global markets. Under this protocol, the parties will develop projects and work packages that add value to the sector, focusing primarily on twin transformation, sustainability, the circular economy, and design. 

Speaking at the signing ceremony, İHKİB Vice President Mustafa Paşahan noted that Türkiye is the world’s seventh-largest apparel supplier and the third-largest supplier to the European Union (EU). He stated that Türkiye accounts for 3.2% of global apparel exports, and continued: 

Istanbul Apparel Exporters’ Association (İHKİB) and Bilişim Vadisi -Technology Development Zone (Informatics Valley) have signed a Cooperation Protocol to enhance the competitiveness of the Turkish apparel industry in global markets. Under this protocol, the parties will develop projects and work packages that add value to the sector, focusing primarily on twin transformation, sustainability, the circular economy, and design. 

Speaking at the signing ceremony, İHKİB Vice President Mustafa Paşahan noted that Türkiye is the world’s seventh-largest apparel supplier and the third-largest supplier to the European Union (EU). He stated that Türkiye accounts for 3.2% of global apparel exports, and continued: 

“We are a leading country in apparel production. Thanks to our high quality, rapid and flexible manufacturing capabilities, and geographical advantages, we stand out from our competitors. We already comply with European standards in areas such as recycling, carbon footprint reduction, digitalization, and social compliance. To further strengthen our position in global markets, we aim to build on these existing strengths and turn digital and green transformation into key opportunities. In this process, we are making effective use of EU funds through projects developed under the IPA (Instrument for Pre-accession Assistance). So far, we have secured €37 million in EU funding. In February, we successfully completed our METAMORPHOSIS project under IPA II, one of the key outcomes of which was the establishment of the Digital Transformation Center, which now serves the industry. Last month, we launched our MIDAS project, also with EU funding, to provide the necessary infrastructure for twin transformation among SMEs. Later this year, we will initiate our 'Carbon Footprint Tracking and Reduction' project, again supported by EU funds. With our new partnership with Bilişim Vadisi, we believe we will launch many innovative projects that will further enhance the global competitiveness of our fashion industry, especially in digitalization and green transformation.” 

ERKAM TUZGEN: CONNECTING STAKEHOLDERS WITHIN THE SAME ECOSYSTEM 
General Manager of Bilişim Vadisi Erkam Tüzgen also shared his thoughts: “Next-generation textile technologies are being driven not only by major players but also by creative startups. Through this program, we are bringing together young entrepreneurs, designers, and technology developers within a shared ecosystem. Bilişim Vadisi will continue to act as a catalyst at this intersection of technology and design.”

Under the protocol, the two parties will apply for national and international support programs focused on digitalization, green transformation, sustainability, the circular economy, and creative industries. They will jointly develop projects and work packages aligned with strategic goals in the technology and design sectors. By collaborating with their affiliates and stakeholders, they will form solution-oriented partnerships in digital transformation and design processes. They will also engage in joint efforts through structures such as digitalization and design clustering centers. Entrepreneurs based in Bilişim Vadisi will be given opportunities to grow through partnerships with İHKİB members.

Source:

Istanbul Apparel Exporters’ Association (İHKİB)

Tour de LOOP Photo Sächsisches Textilforschungsinstitut e.V.
04.06.2025

Tour de LOOP – textile art and design in the European Capital of Culture 2025

The European Capital of Culture 2025, Chemnitz, opened its doors to textile designers, textile artists and experts from the fields of fashion, art and textiles: the Tour de LOOP on 26 and 27 May 2025 took participants on an exclusive professional tour of one of Europe's most traditional and innovative textile regions. 19 visitors from Europe explored Chemnitz and its textile region. They came from the Netherlands, Austria, the Czech Republic, Great Britain and Germany.

Once known as the ‘Saxon Manchester’, Chemnitz today inspires with sustainable textile production, digital textile design and artistic diversity. The two-day trip impressively combined the past, present and future of local textile production.

The European Capital of Culture 2025, Chemnitz, opened its doors to textile designers, textile artists and experts from the fields of fashion, art and textiles: the Tour de LOOP on 26 and 27 May 2025 took participants on an exclusive professional tour of one of Europe's most traditional and innovative textile regions. 19 visitors from Europe explored Chemnitz and its textile region. They came from the Netherlands, Austria, the Czech Republic, Great Britain and Germany.

Once known as the ‘Saxon Manchester’, Chemnitz today inspires with sustainable textile production, digital textile design and artistic diversity. The two-day trip impressively combined the past, present and future of local textile production.

Exclusive guided tours focussing on textile history and textile technologies
To kick things off, a city centre tour including a playful exploration of the European Capital of Culture 2025 broke the ice. Special stops on the tour included the Esche LAB in Limbach-Oberfrohna on 26 May 2025 - a workshop for creative textile work with a focus on knitting, embroidery and ready-to-wear clothing - and the Sächsisches Textilforschungsinstitut e.V. (STFI) on 27 May 2025, which offers extensive opportunities for artistic textile projects and research collaborations.

The programme at the Esche Museum included a demonstration of historical knitting machines, a tour of the Fabric Visions special exhibition and a workshop in the ESCHE Lab. The ESCHE Lab was opened at the beginning of the year and has since been available as a makerspace for creative projects. At the STFI, visitors were given an insight into the technological possibilities of the Textile Lab Professional. In addition to surface technologies such as knitting, weaving, warp knitting, functionalisation and textile recycling, the tour led to the textile factory of the future, where research is being conducted into digitalisation in textile production. The Textile Lab Professional is a cooperation between the STFI and the ESCHE Lab and is open to creative minds with its expertise and diverse plant technology. The trip concluded with a workshop in the art collections, which focussed on the Schneeberger Geflecht exhibition.

European network
The workshops and live demonstrations provided insights into innovative techniques and offered starting points for artistic approaches. Through expert discussions and an open networking evening, the Tour de LOOP created an exchange with creatives, designers and scientists from Chemnitz and Europe. 

Tour de LOOP is an offer from the Makers, Business & Arts project of the European Capital of Culture Chemnitz 2025, the Esche Museum and the Sächsisches Textilforschungsinstitut e.V. (STFI).

Source:

Sächsisches Textilforschungsinstitut e.V.