From the Sector

from to
Reset
484 results
Airbus Helicopter Airbus Helicopter
Airbus Helicopter
22.06.2017

Airbus Helicopters selects HEXCEL as supplier of advanced composite materials for the H160 helicopter

The H160 was designed by Airbus Helicopters to create added value for customers in terms of performance, economic competitiveness, safety and comfort. The use of Hexcel’s composite materials throughout the structure (fuselage, tail boom, tail rotor and main rotor blades) contributes to the lightweight fuel-saving design and performance optimization.
“Hexcel’s composite materials have been used in Airbus Helicopters’ programs for many years and we are honored to be continuing our long term relationship, based on innovation and continuous improvement” commented Thierry Merlot, Hexcel President Aerospace EMEA-AP. “We thank Airbus Helicopters for their selection and look forward to our ongoing supply of high performance, weight saving composites materials for this innovative rotorcraft”.
H160 configurations in development include offshore transportation, business and private aviation, emergency medical services, public services, and commercial passenger transport. The helicopter is planned to enter into service in 2019.

The H160 was designed by Airbus Helicopters to create added value for customers in terms of performance, economic competitiveness, safety and comfort. The use of Hexcel’s composite materials throughout the structure (fuselage, tail boom, tail rotor and main rotor blades) contributes to the lightweight fuel-saving design and performance optimization.
“Hexcel’s composite materials have been used in Airbus Helicopters’ programs for many years and we are honored to be continuing our long term relationship, based on innovation and continuous improvement” commented Thierry Merlot, Hexcel President Aerospace EMEA-AP. “We thank Airbus Helicopters for their selection and look forward to our ongoing supply of high performance, weight saving composites materials for this innovative rotorcraft”.
H160 configurations in development include offshore transportation, business and private aviation, emergency medical services, public services, and commercial passenger transport. The helicopter is planned to enter into service in 2019.

More information:
Hexcel, Airbus
Source:

AGENCE APOCOPE

Carboncast Carboncast
Carboncast
20.06.2017

CHOMARAT AND ALTUS GROUP PRESENT CARBONCAST

At the “Future of Composites in Construction” trade show, CHOMARAT and ALTUS GROUP are presenting CarbonCast®, their flagship line of reinforced-concrete prefabricated wall panels, reinforced with CHOMARAT’s C-GRID® carbon-fiber grids. A recent army-hospital project in Greenville, South Carolina is another success story of this innovative product: 18,600 m² (200,000 sq.ft) of precast insulated panels were installed in record time. Come and learn more about it at the McCormick Place Lakeside Center, Chicago, Stand C 10, on 20-22 June 2017.
“Reducing installation time, improving the fire and safety performance, increasing the service life of structures, and cutting energy consumption are crucial criteria in the choice of a CarbonCast solution,” explains ALTUS GROUP Executive Director John CARSON. CarbonCast® panels are classified ASHRAE 90.1. Thanks to the low thermal conductivity of carbon fiber, C-GRID® reinforced panels offer excellent thermal performance, providing uniform insulation and, therefore, a comfortable, energy-efficient building.

At the “Future of Composites in Construction” trade show, CHOMARAT and ALTUS GROUP are presenting CarbonCast®, their flagship line of reinforced-concrete prefabricated wall panels, reinforced with CHOMARAT’s C-GRID® carbon-fiber grids. A recent army-hospital project in Greenville, South Carolina is another success story of this innovative product: 18,600 m² (200,000 sq.ft) of precast insulated panels were installed in record time. Come and learn more about it at the McCormick Place Lakeside Center, Chicago, Stand C 10, on 20-22 June 2017.
“Reducing installation time, improving the fire and safety performance, increasing the service life of structures, and cutting energy consumption are crucial criteria in the choice of a CarbonCast solution,” explains ALTUS GROUP Executive Director John CARSON. CarbonCast® panels are classified ASHRAE 90.1. Thanks to the low thermal conductivity of carbon fiber, C-GRID® reinforced panels offer excellent thermal performance, providing uniform insulation and, therefore, a comfortable, energy-efficient building.

Source:

AGENCE APOCOPE

Ipsos, Ginetex Ipsos, Ginetex
Ipsos, Ginetex
20.06.2017

In partnership with IPSOS, GINETEX presents the outcomes of its European barometer: "Europeans and textile care labeling"

In partnership with IPSOS, GINETEX presents the outcomes of its European barometer: "Europeans and textile care labeling" 70% of Europeans follow the textile care instructions featured on the labels and 80% admit that they would not (or would rarely) buy clothes without any labels, While another 84% feel concerned by water and energy savings . GINETEX, the international Association for Textile Care Labeling, called upon the French market research company IPSOS, to evaluate the behavior of European Consumers with regards to textile product labels and care symbols. This study, carried out in December 2016, combines the results of six different countries, gathered from a sample of 6,000 people in Germany, England, France, Italy, the Czech Republic and Sweden.
This IPSOS study reveals that 70% of Europeans follow the textile care instructions represented by the symbols. At a pan-European level, 57% even admit that they follow them 'often' and 13% do so 'always'. These figures illustrate the importance of care instructions in the minds of European consumers.

In partnership with IPSOS, GINETEX presents the outcomes of its European barometer: "Europeans and textile care labeling" 70% of Europeans follow the textile care instructions featured on the labels and 80% admit that they would not (or would rarely) buy clothes without any labels, While another 84% feel concerned by water and energy savings . GINETEX, the international Association for Textile Care Labeling, called upon the French market research company IPSOS, to evaluate the behavior of European Consumers with regards to textile product labels and care symbols. This study, carried out in December 2016, combines the results of six different countries, gathered from a sample of 6,000 people in Germany, England, France, Italy, the Czech Republic and Sweden.
This IPSOS study reveals that 70% of Europeans follow the textile care instructions represented by the symbols. At a pan-European level, 57% even admit that they follow them 'often' and 13% do so 'always'. These figures illustrate the importance of care instructions in the minds of European consumers.
- 38% state that they follow these instructions in order to avoid washing problems such as shrinking, in the first place
- 31% follow them in order to preserve their clothes and keep them longer, as a second reason Overall, Europeans consider labels as too cumbersome and 62% admit cutting them out: for 74% of them, the labels itch and irritate their skin and for another 55%, they are often too long and uncomfortable. These results can differ from one European country to another.
However, the presence of the label is a real purchasing criterion since 80% of Europeans state that they would never or rarely buy a piece of clothing without a label.

Source:

GINETEX

Oerlikon presents take up winder Source: www.ita.rwth-aachen.de
Oerlikon presents take up winder
30.05.2017

Oerlikon presents new take-up winder to ITA as partial gift

In May 2017, Jochen Adler, Vice-President and Chief Technology Officer at Oerlikon Textile GmbH & Co. KG, presented a Oerlikon Barmag take-up winder as a partial gift to Prof. Dr Thomas Gries, head of the Institut für Textiltechnik (ITA) at RWTH Aachen University. The new Type ASW602 winder, which is equipped with modern control software and user interface, replaces the former institute’s Barmag take-up winder.

In May 2017, Jochen Adler, Vice-President and Chief Technology Officer at Oerlikon Textile GmbH & Co. KG, presented a Oerlikon Barmag take-up winder as a partial gift to Prof. Dr Thomas Gries, head of the Institut für Textiltechnik (ITA) at RWTH Aachen University. The new Type ASW602 winder, which is equipped with modern control software and user interface, replaces the former institute’s Barmag take-up winder.


Due to this modernisation, ITA has access to a latest generation take-up winder which is used for various research projects. The new winder is applied at ITA’s two pilot melt spinning plants and ensures the transfer of new research and development insights into the pilot scale. Furthermore, this winder has two winding positions and operates with winding speeds between 2500 m/min and 5500 m/min. The new winder is suitable for all kinds of polymers, from polypropylene to polyethylene, polyester, polyamide etc. as well as for the production of several types of yarn, such as industrial yarn, pre-oriented yarn and fully-drawn yarn.
“We thank Oerlikon Barmag for the generous partial gifting and the support during the set-up of the new take-up winder”, says Prof. Dr Thomas Gries. “The new equipment will keep the institute’s machine park on a high and powerful level.” The head of ITA’s chemical fibre department Dr Thorsten Anders adds: “This winder is designed for the needs of chemical yarn research. It allows state of the art technology research and development and pilot-scale production. We will use it for the melt spinning plants in the single- and bi-component spinning process. This way, we can access a wide variety of producible yarn types.“

More information:
Oerlikon, ITA
Source:

Institut für Textiltechnik of RWTH Aachen University