From the Sector

• DushaGreya is a well-known brand from talented Moscow-based designer, Natalia Dushagreya, who puts her all into her unique creations.

Combining her outstanding creativity with cutting-edge digital printing technology, Natalia has been delighting women with eye-catching, comfortable clothes, which boast unparalleled individuality and vivacity for several years. “The quality of digital prints surpasses that of traditional fabrics, both in the variety of colour compositions and in the contrast and clarity when printing small details or complex geometric elements. Digital technology makes it possible to achieve exceptionally smooth colour transitions, which is almost unattainable when using analogue printing methods. As a designer, I make sure to fully leverage the advantages of digital printing when designing and producing my collection”, says Natalia.

By the time the DushaGreya brand begun, Natalia and her like-minded associate and father, Alexander Kordovatov, already had experience in the field of sublimation printing and knew that printing on fabric for subsequent tailoring would be carried out using this technology. However, no third-party performers could be found that would meet the quality and deadline requirements of the brand, so they decided to purchase new equipment and start printing at their own site. 

Alexander says. “We also found out that Smart-T (Mimaki's distributor in Russia), the supplier of this equipment in Moscow, is highly rated by the industry community and customers due to its professional expertise, first-line service support, and highly qualified engineers.” At the end of 2019, Smart-T installed the highly anticipated Mimaki Tx300P-1800 direct textile printer at the DushaGreya facility. Today it prints fabrics for dresses, skirts, T-shirts, fleeces, jumpers, hoodies, trench coats, and other midwear.

"Mimaki Tx300P-1800 is the only printer in the Mimaki line that allows us to print on natural fabrics without pre-processing,” Alexander comments. “This gives us the ability to produce short, original print runs at no extra cost, which is vital in achieving our goals. The TP400 pigment inks used in this printer have an expanded colour gamut, so the prints are always bright and saturated.”

A polybutylene succinate (PBS) polycondensation system was commissioned at Yingkou Kanghui Petrochemical Co. Ltd. in Dalian in the Chinese Liaoning Province at the beginning of January 2021. The PBS system, for which Oerlikon Barmag Huitong Engineering supplied both equipment and engineering, has a daily production capacity of 100 tons

It is used to manufacture high-viscosity chips for biodegradable films. Consequently, Yingkou Kanghui, a subsidiary of the Hengli Group, is catering to rising demand for biodegradable polymer products – demand that is increasing not just in China, but across the globe. Yingkou Kanghui Petrochemical Co., Ltd., founded in 2011, predominantly produces polyester chips and films. By expanding its portfolio to include the manufacture of PBS products, the enterprise is positioning itself as a pioneer of biopolymer production: In view of the large quantities of plastic waste not just in the oceans, biopolymers are considered the materials of the future.

The new plant at Yingkou Kanghui Petrochemical Co, Ltd. was production-ready with the support of Oerlikon Barmag Huitong Engineering within less than 14 months following contract signing.

Hexcel is pleased to announce Type Approval Certification of its HexPly® M9 prepreg materials by DNV GL. The addition of the HexPly M9 prepreg range to Hexcel’s already comprehensive DNV GL certified portfolio provides ship and boat builders with optimal prepreg processing options.

HexPly M9 prepregs enable short cure cycles at 100˚C and above and provide a balance between ease of processing and mechanical performance. Available in high tack and medium tack variants, HexPly M9 prepregs are available with a wide range of unidirectional, woven, and multiaxial reinforcements. Partnered with Hexcel’s own HexTow® IMC2 and HexTow® HM54 / HM63 fibers, designers and engineers can optimize highly loaded composite structures such as masts, wing sails, and foils with increased glass transition temperatures (Tg) and excellent long-term fatigue performance.
 
Hexcel has completed the DNV GL certification for HexPly M9 in response to the rapidly increasing demand for type-approved high-performance prepreg materials for large composite structures in the commercial marine craft.  

Hexcel’s collaboration with Chantiers de l’Atlantique on its new Silenseas cruise ship concept – a concept that uses composite Solid Sail® propulsion as well as dual-fuel engines to reduce emissions and operating costs – is one such application. In this case, DNV GL type approval provides third-party assurance of the product’s quality, performance and consistency, and also helps to streamline the approval of composite parts that replace traditionally metallic structures.

Hexcel has supplied advanced composite materials to the marine industry for more than 40 years and manufactures a comprehensive range of DNV GL certified products including woven reinforcements, multiaxial fabrics, prepregs, and adhesive films. Hexcel is committed to developing new composite technologies for the marine sector, helping builders evolve their designs to produce lighter, more fuel-efficient, and a sustainable craft for the future.

“Our latest Type Approval Certification is an important part of our strategy to provide the most complete package of DNV GL certified composite materials for the marine sector,” said Andreas Sageder, Product Manager at Hexcel. “With the addition of our M9 prepreg resin systems, mast, ship, and boat builders have an expanded range of processing and cure options available for parts requiring higher Tg and improved fatigue performance.”

Kornit Digital, a worldwide market leader in digital textile printing technology, announced Westerbroek, Groningen-based Reclameland has invested nearly €20 million in a second production hall and state-of-the-art machines, including the Kornit Atlas system for industrial direct-to-garment (DTG) production on demand, in the past year to further accelerate growth. The fastest-growing online printer in the Netherlands, Reclameland achieved a turnover of almost €23 million in 2019 and a profit of more than €1 million.

Now the second-largest business of its type in the Netherlands, Reclameland’s workforce grew by 20% in the past year, enabling them to handle most production operations internally. They attributed increased demand for printed pieces to a strong growth in online buying, for both consumers and businesses.

“2019 marked the definitive breakthrough of online printing, and we have established ourselves as a total print solutions provider for signage, banners, posters, flags, and other digitally printed textiles,” says Wouter Haan, CEO of Reclameland.  "By continuously innovating, we can serve every type of customer. Our investment in Kornit technology has empowered us to imprint more than a thousand garments per day with a single operator, meeting the retail quality, wash and light fastness, and sustainability standards of the world’s largest apparel brands.”

“Reclameland demonstrates the vast opportunities on-demand producers have when they diversify their product offerings and align their operations for a marketplace that increasingly relies on e-commerce,” says Chris Govier, KDEU Managing Director. “Kornit technology offers the perfect foundation for making that business model a success, eliminating slow and costly steps between buyers seeing a brilliantly-designed piece virtually and having it in their hands. We are proud to support Reclameland as they grow to fulfill the promise of digital commerce.”

Reflecting the pandemic-related drop in worldwide vehicle production, Autoneum’s revenue in local currencies fell by –18.7% in 2020, although the second half of the year saw a significant market recovery. Group revenue in Swiss francs fell by –24.2% year-on-year to CHF 1 740.6 million. For the full year 2020, the EBIT margin will be around 1.5% and the free cash flow slightly over CHF 100 million.
At the Annual General Meeting on March 25, 2021, the Board of Directors will propose Liane Hirner and Oliver Streuli for election to the Board of Directors of Autoneum Holding. Peter Spuhler will not stand for re-election.

At 74.5 million, the number of light vehicles produced globally in 2020 was down –16.2% compared to the previous year, where around 89 million vehicles were manufactured. Autoneum’s revenue in local currencies decreased by –18.7% in 2020, pretty much in line with the negative market dynamics. The somewhat stronger decline of revenue compared to the market results from a lower share of Asia in Autoneum's total revenue. Impacted by the appreciation of the Swiss franc against the most important currencies for Autoneum, the consolidated revenue dropped in 2020 by –24.2% to CHF 1 740.6 million. The heterogeneous development of the first and second half of the year was characteristic for the pandemic-driven automotive year 2020. Worldwide lockdowns and production stoppages at vehicle manufacturers led to a market slump in the first six months and a corresponding loss in revenue for Autoneum. Thanks to the subsequent market recovery and catch-up effects in the second half of the year, revenue improved considerably compared to the first half of the year.

Revenue development in Asia and SAMEA region significantly better than market
While revenues in local currencies of the highest-volume Business Groups Europe and North America decreased by –25.6% and –19.3% respectively, reflecting the regional, pandemic-driven market development (Europe: –22.9%; North America: –20.1%), Business Group Asia almost held its prior-year level with an organic decline of only –2.1% in 2020 thanks to the strong upturn in automobile production in China in the second half of the year and despite the fact that the number of vehicles produced in Asia fell by –11.4%.*

Personnel changes to the Board of Directors
At the Annual General Meeting on March 25, 2021, the Board of Directors of Autoneum Holding will propose Liane Hirner and Oliver Streuli for election as new members of the Board of Directors.
Liane Hirner has been CFO and member of the Management Board of Vienna Insurance Group, based in Vienna, Austria, since 2018.*

Oliver Streuli, a Swiss national, has been CEO of PCS Holding, based in Frauenfeld (Canton Thurgau), Switzerland, since 2019.*

Peter Spuhler has been a member of the Board of Directors of Autoneum since 2011 and will not stand for re-election at the Annual General Meeting on March 25, 2021.*

*See attached document for further informationen

• ISKO Vital™+ Premium community face cover receives the NEN certification in the Netherlands.

The responsible face cover brand is the first to be awarded the Dutch standard, recently established by The Royal Netherlands Standardization Institute. The mark of conformity was issued on January 19, when ISKO Vital+ completed the certification process.

Supported by parent company ISKO’s 100-years of experience and know-how in the textile industry, ISKO Vital+’s range of Premium face covers has exceeded the requirements set out by NEN for community face covers. The recently established Dutch standard, NEN-spec 1- 2 requires manufacturers to pass rigorous testing for bacterial filtration efficiency, breathing resistance, fit and ease of use and sustainability.
With a bacterial filtration efficiency (BFE) of ≥95% that exceeds the NEN’s minimum requirement of ≥70%, the ISKO Vital+ Premium face cover is a patented 4-fold design made from ISKO Vital™ fabric, a groundbreaking textile solution created by ISKO’s in-house research and development experts. It is fluid repellent and very easy to breathe through thanks to a single layer of organic cotton which is dermatologically tested, OEKO-TEX Standard 100 certified and gentle on the skin, providing a superior level of comfort as assessed by an independent panel.

Available in different sizes and colors, the Premium face covers surpass the minimum NEN requirement for breathing resistance of <70 Pa/cm2 too, with a respiratory resistance lower than 40 Pa/cm2 – making the face covers very comfortable to wear. In addition, they are much more sustainable than disposable masks as they can be reused and hand or machine-washed up to 15 times without loss of quality. “Current circumstances are expected to last in the foreseeable future, so it is extremely important to wear proper community face covers”, explained Edgar van der Linden, ISKO Vital™ Medical Business Lead. “Thanks to the mark of conformity, it is now clear that face cover must have the highest possible filtration efficiency and must also be comfortable, expressed in the lowest possible breathing resistance. Environmental aspects are also addressed. As a supplier of washable face covers made from one innovative layer of organic cotton we consider that very important. A good community face cover offers a combination of high filtration efficiency, comfort, ease of use and minimizes the burden on the environment”.

• Tata Communications continues to drive growth and profitability Delivers PAT of INR 309 Crore for Q3, up 428% YoY
• Data services revenue grew by +3.8% YoY | Consolidated EBITDA at INR 1,046 Crore, increase of +37.5% YoY with margin expansion of 680 Bps

Consolidated financial highlights

•    Consolidated revenue was at INR 4,223 crore (USD 572 Mn); flat YoY, growth in data business compensated for decrease in Voice business
•    Consolidated EBITDA at INR 1,046 crore (USD 142 Mn); increase of +37.5% YoY on the back of robust growth and margin expansion in data business and cost optimisation initiatives
•    Consolidated PAT at INR 309 crore (USD 42 Mn) as compared to a profit of INR 59 crore in Q3 FY20, growth of +428% YoY, on the back of strong growth in profitability
•    Net Debt has come down on the back of strong free cash flow generation; Net Debt to EBITDA at 1.9x as compared to 2.9x for same quarter last year
•    CAPEX for this quarter was INR 339 crore as compared to INR 490 crore in Q3 FY20

Please find attached the detailed financial results Q2 FY21.

Hologenix, creators of Celliant®, infrared responsive technology, and Kelheim Fibres, a world-leading manufacturer of viscose specialty fibers, have partnered to launch Celliant Viscose at ISPO Munich 2021. Celliant Viscose is a finalist in Best Products by ISPO and will be showcased in the Fibers & Insulations Category for ISPO Textrends, where realistic views and 3-D simulations will be available for each material.

The introduction of nature-based Celliant Viscose will be the first in-fiber infrared sustainable solution on the market and meets a consumer demand for more environmentally friendly textiles. An alternative to synthetic fibers and extremely versatile, Celliant Viscose blends beautifully with cotton, micromodal, lyocell, wool varieties including cashmere. It also has many applications across industries as it is ideal for performance wear, luxury loungewear, casual wear and bedding.

Celliant Viscose features natural, ethically sourced minerals embedded into plant-based fibers to create infrared products that capture and convert body heat into infrared, increasing local circulation and improved cellular oxygenation. This results in stronger performance, faster recovery and better sleep.

Celliant Viscose provides all the benefits of being a viscose fiber — lightweight, soft, highly breathable, excellent moisture management — as well as fiber enhancements from Celliant infrared technology. Celliant’s proprietary blend of natural minerals allows textiles to capture and convert body heat into full-spectrum infrared energy, resulting in stronger performance, faster recovery and better sleep. In addition, Celliant is durable and will not wash out, lasting the useful life of the product it powers.

An Affordable, Long-lasting Solution with Diverse Applications
As opposed to other IR viscose products which are coatings based, Celliant Viscose’s in-fiber solution increases wearability and longevity with a soft feel, durability from washing and longer life. The combination of Kelheim’s distinctive technology and the Celliant additives creates this unique fiber that provides full functionality without the need for any additional processing step — a new standard in the field of sustainable IR viscose fibers. This single processing also makes Celliant Viscose more cost-effective and time-efficient than coatings.

In addition, Kelheim’s flexible technology allows targeted interventions in the viscose fiber process. By modifying the fiber’s dimensions or cross sections or by incorporating additives into the fiber matrix, Kelheim can precisely define the fiber’s properties according to the specific needs of the end product.

Highly Sustainable
Celliant Viscose is a plant and mineral-based solution for brands seeking an alternative to synthetic fibers. It contains natural raw materials that are from the earth and can return safely to the earth.

Nature-based Celliant Viscose is certified by FSC® or PEFC™, which guarantees the origin in sustainably managed plantations, and is part of the CanopyStyle initiative to protect ancient and endangered forests. The production of Celliant Viscose takes place exclusively at the Kelheim facilities in Germany, complying with the country’s strict environmental laws and guaranteeing an overall eco-friendly product.

Backed by Science
Celliant is rigorously tested by a Science Advisory Board composed of experts in the fields of physics, biology, chemistry and medicine. The Science Advisory Board has overseen 10 clinical, technical and physical trials, and seven published studies that demonstrate Celliant’s effectiveness and the benefits of infrared energy.

For more information, visit www.celliant.com/celliant-viscose/

The RUDOLF GROUP is an uncontested agent of positive change especially when it comes to pioneering technologies that help transforming the textile and fashion industries. A shining example of conscious leadership played by the RUDOLF GROUP over the past decades is the invention and introduction of fluorine-free Durable Water Repellency (DWR) for textile and apparel. Since 2003, the RUCO-DRY product line has gradually convinced the industry that water-resistance can be achieved through the study and replica of natural models. “Biomimicry and the study of lotus leaves and bird’s feathers were instrumental in developing the very first fluorine-free DWR’s” says Dr. Gunther Duschek, Managing Director at RUDOLF GROUP.

Fifteen years later, RUDOLF GROUP does it again and takes a significant leapfrog. It pushes the boundaries of R&D well beyond fluorine-free, embraces nature and introduces water repellent performance entirely based on natural components. “We are launching two brand new, distinctive product propositions entirely manufactured from natural sources that do not compete with human and/or animal nutrition” continues Dr. Duschek.

RUCO®-DRY BIO CGR is an absolute breakthrough and the first Durable Water Repellent (DWR) agent based on plant-derived processing wastes. In fact, RUCO®-DRY BIO CGR is made of natural waste that accumulates as by-product during the processing of cereal grains in the food industry. The leftover material that would otherwise be disposed of is refined to create a powerful water and stain repellent textile finish.

“By turning natural waste into DWR we have optimized the biologic character of RUCO®-DRY BIO CGR where the active component is made of more than 90% bio carbon” states Dr. Dirk Sielemann, R&D Director at RUDOLF GROUP. He continues: “Although most of the product is composed by recycled biomass, RUCO®-DRY BIO CGR meets the performance and durability of conventional water repellent textile finishes”.

RUCO®-DRY BIO NPE is an equally outstanding product innovation where DWR is entirely based on a carefully selected mix of natural plant extracts. The well-balanced mix of plant-based ingredients combines excellent water and stain repellent effects with breathability and a natural handfeel. 

Unlike other 100% renewable raw materials, those used in the making of RUCO®-DRY BIO NPE are chemically and genetically non-modified and are not used as food, feed or fuel. Furthermore, all of the plant extracts that compose RUCO®-DRY BIO NPE are subject to a strict conservation and sustainability framework. “That’s why the supply of RUCO®-DRY BIO NPE is likely to remain limited to the creation and marketing of performance outdoor and sports apparel programs embedding state-of-the-art sustainable technology” concludes Dr. Duschek.

Both RUCO®-DRY BIO CGR and RUCO®-DRY BIO NPE are marketed through the BIO-LOGIC trademark, registered by RUDOLF GROUP.

For each of your visits to our page on the Texworld NYC virtual platform, Ecopel commits to plant one tree. Planting trees is an effective way to offset our greenhouse gas emissions and promote responsible practices. In 2020, Ecopel planted 2,000 trees with the One Tree Planted charities with a mission to help global reforestation efforts.
 

• #MakeAChange, PLANT A TREE