From the Sector

from to
Reset
1317 results
(c) Euratex
EU-27 Textile & Clothing Turnover
12.10.2021

EURATEX: Latest economic data confirm further recovery of the textile and clothing industry

European Textiles and Clothing (T&C) industry coming out of the Covid19-crisis, but facing new challenges ahead. This recovery may however be disrupted by the current supply chain and energy problems. Latest economic data on the European T&C industry confirm further recovery from the corona pandemic. The textile activity has now surpassed its pre-pandemic level from Q4 2019 (+3.6%); the clothing sector still remains 11.5% below, but continues to improve.

European Textiles and Clothing (T&C) industry coming out of the Covid19-crisis, but facing new challenges ahead. This recovery may however be disrupted by the current supply chain and energy problems. Latest economic data on the European T&C industry confirm further recovery from the corona pandemic. The textile activity has now surpassed its pre-pandemic level from Q4 2019 (+3.6%); the clothing sector still remains 11.5% below, but continues to improve.

In quarter-on-quarter terms, the EU turnover showed signs of improvements across the sector. The textile turnover increased by +3.3% in Q2 2021, after slightly contracting in Q1 2021. Similarly, the business activity in the clothing sector expanded by +7% in Q2 2021, after increasing by +1% in the previous quarter.
 
In the 2nd quarter 2021, the EU-27 trade balance for T&C improved, resulting mostly from an increase of export sales across third markets and a drop of textile imports. T&C Extra-EU exports boomed by +49% as compared with the same quarter of the previous year. T&C Extra-EU imports went down by -26% as compared with the same quarter of the previous year, following a decrease of imports from some main supplier countries. EU imports from China and the UK collapsed due to a combination of Brexit and weaker demand in Europe.
 
During the second quarter of 2021, job creation was slowly stabilising in the textile industry (-0.2% q-o-q), while employment in the clothing sector continued to be affected by lower levels of production activity in industry during the first part of the year (-1.2%). When compared to its pre-pandemic level in Q4 2019, EU employment in Q2 2021 was still 4.4% down in textiles and 11.8% down in clothing.

However, this fragile recovery is hampered by higher shipping costs and prices’ increase in raw materials and energy. The cost of energy, in particular gas, has increased more than 3 times since the beginning of this year. Since the announcement of the EU’s “Fit for 55” package, we have seen CO2 prices rising above €60. This inevitably has an impact on the industry’s competitiveness, especially in a global context. The future recovery is also threatened by some factors limiting production, such as shortage of labour force and equipment, which are putting additional pressure on T&C industries.

Director General Dirk Vantyghem commented on these latest figures: “Our companies have shown great resilience during the pandemic, and their latest export performance is an encouraging sign of recovery. This recovery may however be disrupted by the current supply chain and energy problems. Once again, recent developments show that this transition towards more sustainable production can only work if organised in a global context, avoiding carbon leakage and with an effective level playing field. This must be considered in the upcoming EU Textiles Strategy.”

More information:
Euratex
Source:

Euratex

12.10.2021

Röhm: PLEXIGLAS® molding compounds at Fakuma 2021

  • Comprehensive portfolio for innovative vehicle design
  • Material development is keeping pace with technical innovations
  • PLEXIGLAS® Optical HT PMMA special molding compound for the best optical quality at high continuous service temperatures

Vehicle design requirements are changing in line with the huge trends in the industry, such as electric drivetrains and autonomous driving. Materials manufacturers are preparing for this and are developing custom materials – and PLEXIGLAS® special molding compounds from Röhm GmbH are just one example. Between October 12 and 16, the Molding Compounds business unit will be presenting its diverse range of PLEXIGLAS® molding compounds for the automotive sector at Fakuma 2021 in Friedrichshafen.

The brand polymethyl methacrylate (PMMA) from Röhm is both light and robust, has a high-quality surface and can be processed in all common injection molding and extrusion procedures.

  • Comprehensive portfolio for innovative vehicle design
  • Material development is keeping pace with technical innovations
  • PLEXIGLAS® Optical HT PMMA special molding compound for the best optical quality at high continuous service temperatures

Vehicle design requirements are changing in line with the huge trends in the industry, such as electric drivetrains and autonomous driving. Materials manufacturers are preparing for this and are developing custom materials – and PLEXIGLAS® special molding compounds from Röhm GmbH are just one example. Between October 12 and 16, the Molding Compounds business unit will be presenting its diverse range of PLEXIGLAS® molding compounds for the automotive sector at Fakuma 2021 in Friedrichshafen.

The brand polymethyl methacrylate (PMMA) from Röhm is both light and robust, has a high-quality surface and can be processed in all common injection molding and extrusion procedures.

At Fakuma 2021, Röhm will present one of its newest special molding compounds for the first time. PLEXIGLAS® Optical HT was developed specifically for applications with high power LEDs, such as headlamp lenses. With its special characteristics profile, the innovative material guarantees the best possible optical quality even at increased continuous service temperatures.

More information:
Röhm Fakuma PLEXIGLAS® Automotive
Source:

Röhm GmbH

12.10.2021

Elleti and Itema at Première Vision in Milan

Elleti Group, an Italian manufacturer specialized in denim treatments and garment making, will present an innovative approach: how we experience denim and its transformation processes.

Elleti Group, an Italian manufacturer specialized in denim treatments and garment making, will present an innovative approach: how we experience denim and its transformation processes.

Elleti Group will display its “Green Replicants” project in a new and improved “Lighter. Better. Wiser.” edition.  This project, inaugurated a few years ago, recreates some of the iconic pieces from the Elleti Group Museum of Denim (dating back to the 19th century) with today’s most advanced environmentally sustainable technologies. This special edition replicas are fully developed using the latest addition to the sustainable tools of the company: the “Wiser Wash” technology, a patented washing method that eliminates the use of all potentially harmful chemicals and pumice stone, while drastically reducing the water consumption throughout the process.
 
Moreover, at the Immaterial M.O.D.E. booth, a special project designed by Denim Première Vision and realized in collaboration with Elleti Group and Sense – Immaterial Reality will take visitors through an Augmented Reality installation to explore a selection of legendary pieces from M.O.D.E., Museum of Denim by Elleti Group. By downloading the app, available on every digital store, on your phone or tablet and looking out for the signage on site, unique denim masterpieces will be at everyone’s fingertips.

Itema, a worldwide manufacturer of weaving solutions, will be for the first time at the Denim Première Vision fair. The company is renowned in the industry to be one of the only manufacturers to produce all the top three weft insertion technologies – rapier, air-jet and projectile.

The company will highlight the iSAVER® technology: designed by Itemalab®, the Itema advanced innovation company. Thanks to iSAVER®, one thousand kilos of cotton per loom a year will be saved – i.e. 3% of total raw materials – which will prevent wasting 20 million litres of water, while saving costs for about €2.000 a year on each loom. iSAVER® significantly contributes in making the denim production greener.

Source:

Menabò Group srl

12.10.2021

DSM to showcase armor solutions made with Dyneema® at Milipol Paris 2021

DSM, the inventor and manufacturer of Dyneema®, will be exhibiting at one of the leading events for homeland security and safety, Milipol Paris 2021, from October 19-22.

The performance characteristics of Dyneema® make it ideal for a variety of applications, including soft and hard armor ballistics to protect against today’s advanced and emerging threats. In addition, Dyneema® combines next-generation fiber technology and unidirectional engineering to deliver armor solutions with unmatched ballistic stopping power in a lightweight and flexible composite.

By implementing Dyneema®, body armor manufacturers are able to use less material in the development of their ballistic vests, plates and helmets. This leads to weight savings upwards of 30 percent when compared to competitive materials, without impacting ballistic performance. The lightweight construction of armor made with Dyneema® also mitigates injuries associated with the cumulative effects of daily armor use – while improving situational awareness, as well as cognitive and tactical performance.

DSM, the inventor and manufacturer of Dyneema®, will be exhibiting at one of the leading events for homeland security and safety, Milipol Paris 2021, from October 19-22.

The performance characteristics of Dyneema® make it ideal for a variety of applications, including soft and hard armor ballistics to protect against today’s advanced and emerging threats. In addition, Dyneema® combines next-generation fiber technology and unidirectional engineering to deliver armor solutions with unmatched ballistic stopping power in a lightweight and flexible composite.

By implementing Dyneema®, body armor manufacturers are able to use less material in the development of their ballistic vests, plates and helmets. This leads to weight savings upwards of 30 percent when compared to competitive materials, without impacting ballistic performance. The lightweight construction of armor made with Dyneema® also mitigates injuries associated with the cumulative effects of daily armor use – while improving situational awareness, as well as cognitive and tactical performance.

While decreasing the load on the wearer, Dyneema® is simultaneously able to reduce the impact of material manufacturing on our planet. In line with DSM’s commitment to protect people and the environment they live in, we have developed the first-ever bio-based ultra-high molecular weight polyethylene fiber and unidirectional (UD) material. Bio-based Dyneema® boasts the same exact performance as conventional Dyneema® with a carbon footprint that is 90 percent lower than generic HMPE.

Source:

DSM Protective Materials / EMG

11.10.2021

ISKO™ introduces R-TWO™50+

Denim ingredient brand ISKO™ announces R-TWO™50+. Part of Responsible Innovation™, R-TWO™50+ creates high-quality denim that is less harmful to the natural world.

R-TWO™50+ reduces carbon emissions by as much as 45% and water usage by as much as 65%. An exclusive yarn spinning technology, patented by ISKO, uses a minimum of 50% recycled materials to reduce reliance on natural resources.

The fabrics are stronger and more durable, and have a good shape recovery, a soft cotton hand feel and dry up to 20% more quickly.
R-TWO50+ fabrics also have the Global Recycled Standard (GRS) certification, which provides standardised verification for recycled materials.

ISKO is also one of the first in the fashion market to achieve an ESG (Environmental, Social, and Governance) scoring, which measures companies’ sustainability and societal impact.

Denim ingredient brand ISKO™ announces R-TWO™50+. Part of Responsible Innovation™, R-TWO™50+ creates high-quality denim that is less harmful to the natural world.

R-TWO™50+ reduces carbon emissions by as much as 45% and water usage by as much as 65%. An exclusive yarn spinning technology, patented by ISKO, uses a minimum of 50% recycled materials to reduce reliance on natural resources.

The fabrics are stronger and more durable, and have a good shape recovery, a soft cotton hand feel and dry up to 20% more quickly.
R-TWO50+ fabrics also have the Global Recycled Standard (GRS) certification, which provides standardised verification for recycled materials.

ISKO is also one of the first in the fashion market to achieve an ESG (Environmental, Social, and Governance) scoring, which measures companies’ sustainability and societal impact.

More information:
Isko Denim Recycling Sustainability
Source:

ISKO / Menabò Group srl

Picanol introduces online plattform for weaving (c) Picanol
08.10.2021

Picanol introduces online platform for weaving

With PicConnect, a new fully digital platform, Picanol is offering a wide range of features, from industrial IoT to service-related applications. PicConnect is a web-based application that can be accessed through a web browser on any device and it functions as the gateway to all Picanol’s digital services. The platform is cloud-based and it allows connecting the Picanol weaving machines to the platform in order to leverage its full extent of possibilities.

“PicConnect enables weavers to quickly react to changes in the weaving room, and it will have an immediate impact on the performance of the weaving machines. It will not only change how weavers interact with their machines but also the way they interact with Picanol. For this reason, Picanol can boldly state that PicConnect is bringing weavers into the era of intuitive weaving,” comments Johan Verstraete, Vice President Weaving Machines.

The first four applications that will be launched as part of PicConnect are: production monitoring, energy monitoring, style administration, and PartsLine, which is Picanol’s new online webshop.

With PicConnect, a new fully digital platform, Picanol is offering a wide range of features, from industrial IoT to service-related applications. PicConnect is a web-based application that can be accessed through a web browser on any device and it functions as the gateway to all Picanol’s digital services. The platform is cloud-based and it allows connecting the Picanol weaving machines to the platform in order to leverage its full extent of possibilities.

“PicConnect enables weavers to quickly react to changes in the weaving room, and it will have an immediate impact on the performance of the weaving machines. It will not only change how weavers interact with their machines but also the way they interact with Picanol. For this reason, Picanol can boldly state that PicConnect is bringing weavers into the era of intuitive weaving,” comments Johan Verstraete, Vice President Weaving Machines.

The first four applications that will be launched as part of PicConnect are: production monitoring, energy monitoring, style administration, and PartsLine, which is Picanol’s new online webshop.

Source:

Picanol

GoCustom Clothing Adopts Kornit Avalanche HD6 (c) Kornit Digital / GoCustom Clothing
07.10.2021

GoCustom Clothing Adopts Kornit Avalanche HD6

Kornit Digital announced that United Kingdom-based GoCustom Clothing has installed the Kornit Avalanche HD6 system for on-demand, direct-to-garment (DTG) digtal production. This installment coincides with GoCustom Clothing’s implementation of the KornitX platform, which provides a streamlined end-to-end workflow between the brand’s online customer stores and their production floor.

GoCustom Clothing offers print and embroidery services, and began by providing workwear for local businesses before branching out to school hoodies and uniforms. As their e-commerce business grew and orders became more diverse, GoCustom Clothing determined it was best to add digital DTG production capabilities, which could accommodate both orders of 1,000-plus pieces and single pieces. GoCustom originally invested in a Kornit Storm system for on-demand production, before upgrading to a Kornit Avalanche HD6 for increased capacity.

Kornit Digital announced that United Kingdom-based GoCustom Clothing has installed the Kornit Avalanche HD6 system for on-demand, direct-to-garment (DTG) digtal production. This installment coincides with GoCustom Clothing’s implementation of the KornitX platform, which provides a streamlined end-to-end workflow between the brand’s online customer stores and their production floor.

GoCustom Clothing offers print and embroidery services, and began by providing workwear for local businesses before branching out to school hoodies and uniforms. As their e-commerce business grew and orders became more diverse, GoCustom Clothing determined it was best to add digital DTG production capabilities, which could accommodate both orders of 1,000-plus pieces and single pieces. GoCustom originally invested in a Kornit Storm system for on-demand production, before upgrading to a Kornit Avalanche HD6 for increased capacity.

Kornit Avalanche HD6 can digitally produce numerous apparel types without considerable setup time.  Pallets can be changed quickly to handle different sizes and applications, versus the costly and time-consuming processes associated with screen printing operations. Furthermore, digitizing operations with KornitX,  Kornit’s operating system for on-demand sustainable fashion, means increased control and management of the end-to-end fulfillment process, from front-end steps including design, order management, and virtual catalog to smart routing of orders, production, packaging, and shipping.

Source:

Kornit Digital / pr4u

During the first physical Frankfurt Fashion Week in January 2022, PREMIUM GROUP will show more novelties than ever. (c) PREMIUM GROUP
SEEK
06.10.2021

SAVE THE DATE: Frankfurt, January 2022

  • HIGHER, FASTER, FURTHER ! During the first physical Frankfurt Fashion Week in January 2022, PREMIUM GROUP will show more novelties than ever.

The anticipation is rising! With the actual move to Frankfurt in January 2022, Anita Tillmann, Jörg Arntz and the teams will not only present further developed versions of the PREMIUM and SEEK fashion fairs, but will also celebrate a major B2C festival for the first time with THE GROUND.

More than ever, the Berliners‘ passion for people and fashion, but also for business and trading, is at the heart of all their events. And where better to combine all this than in the power metropolis of Frankfurt am Main.

  • HIGHER, FASTER, FURTHER ! During the first physical Frankfurt Fashion Week in January 2022, PREMIUM GROUP will show more novelties than ever.

The anticipation is rising! With the actual move to Frankfurt in January 2022, Anita Tillmann, Jörg Arntz and the teams will not only present further developed versions of the PREMIUM and SEEK fashion fairs, but will also celebrate a major B2C festival for the first time with THE GROUND.

More than ever, the Berliners‘ passion for people and fashion, but also for business and trading, is at the heart of all their events. And where better to combine all this than in the power metropolis of Frankfurt am Main.

„No city in Germany - no city in Europe - stands for business relevance and trading power as much as Frankfurt am Main,“ explains Tillmann. „We now have a unique opportunity to actively shape the future together. PREMIUM GROUP provides the industry with the platform, the brands with the creative content. In addition, we do what we do best, introduce the right players to each other and connect them. We bring together the movers and shakers who have the same drive as we do. With this new mix of location, entertainment, creative industry and trading focus, we are creating a unique momentum after the pandemic - January is when the big deals are made and the c ourse is set for the future.“

To achieve this goal, the PREMIUM GROUP teams have also given the proven successful formats PREMIUM and SEEK a new coat of paint. More space, new areas and shorter distances provide visitors with a completely new trade event experience. Trends, brands and events can be discovered together with new and well-known partners - for the first time all in one place!

And PREMIUM, which is already entering its 19th year in January, is also showing a new side in Frankfurt. Instead of being spread out like in Station-Berlin, in Frankfurt all brands show their collections in one big hall. „We are so excited to finally unite all exhibitors in one hall. This way we create a universe with many different worlds - colorful and exciting,“ says Wiebus. „We are in close exchange with all the protagonists throughout the year and continue to develop the concepts together. The entire industry is positive about coming together in Frankfurt. Everyone is keen to experience and create something completely new! We offer the framework for this - that is our strength.“

And the Berliners have another surprise in store for the Frankfurt debut: With THE GROUND, they are organizing a large fashion festival for young end consumers for the first time. Responsible for the event concept, in addition to Tillmann, Arntz and the PREMIUM GROUP- team, is B2C expert Kai Zollhöfer, who already made the Bread & Butter by Zalando a crowd puller. “THE GROUND is a B2C festival aimed at a young, purpose-driven generation. This new generation has a strong stance on current social and environmental challenges and expects brands to reflect them. The overriding themes at THE GROUND are therefore sustainability, diversity and equality”, said Zollhöfer.

The 3-day event offers brands the opportunity to interactively exhibit purpose-driven stories and products. In addition to the thematic focus on fashion, brands from the fields of wellbeing, beauty, mobility and technology will also present innovative products and solutions.

04.10.2021

MS Plastic Welders: Name Change to MS Ultrasonic Technology

MS Plastic Welders, LLC, a leader in ultrasonic technology, announced today that it has changed its name to MS Ultrasonic Technology, LLC. This aligns the name with the sister companies worldwide as well as with the brand name MS Ultrasonic Technology Group.  

The name change reflects the growth of the company as well as its vision for the future.

COO, Peter Wall said “The new name really speaks to who we are as a company. Considering our current relocation to Howell, MI, it was the perfect opportunity to implement the name change at the same time.”

“We’re very excited about the name change as it fits perfectly with our slogan- We Are Ultrasonics.,” said MS Ultrasonic Technology, LLC CFO, Rouven Muell. “It makes it easier for customers, partners, and candidates to consistently recognize our company within the MS Ultrasonic Technology Group and clearly addresses our focus in Ultrasonics.”

MS Plastic Welders, LLC, a leader in ultrasonic technology, announced today that it has changed its name to MS Ultrasonic Technology, LLC. This aligns the name with the sister companies worldwide as well as with the brand name MS Ultrasonic Technology Group.  

The name change reflects the growth of the company as well as its vision for the future.

COO, Peter Wall said “The new name really speaks to who we are as a company. Considering our current relocation to Howell, MI, it was the perfect opportunity to implement the name change at the same time.”

“We’re very excited about the name change as it fits perfectly with our slogan- We Are Ultrasonics.,” said MS Ultrasonic Technology, LLC CFO, Rouven Muell. “It makes it easier for customers, partners, and candidates to consistently recognize our company within the MS Ultrasonic Technology Group and clearly addresses our focus in Ultrasonics.”

Source:

MS Ultraschall Technologie GmbH

ISKO launches woven compression technology (c) ISKO, SANKO Group
04.10.2021

ISKO launches woven compression technology

ISKO introduces ISKO RHEACT™ – a patented, cutting-edge garment manufacturing solution designed to improve everyday living and physical wellness for everyone, through the proven benefits of woven compression.

Building on the exponentially growing trend for wellbeing products in many consumer sectors, ISKO has leveraged its expertise in developing innovative technologies to create ISKO RHEACT, its own wellbeing product for the apparel industry. Available exclusively to ISKO’s trade partners, ISKO RHEACT is extremely versatile and suitable for use in a variety of consumer sectors, from lifestyle, to fitness and workwear.

ISKO introduces ISKO RHEACT™ – a patented, cutting-edge garment manufacturing solution designed to improve everyday living and physical wellness for everyone, through the proven benefits of woven compression.

Building on the exponentially growing trend for wellbeing products in many consumer sectors, ISKO has leveraged its expertise in developing innovative technologies to create ISKO RHEACT, its own wellbeing product for the apparel industry. Available exclusively to ISKO’s trade partners, ISKO RHEACT is extremely versatile and suitable for use in a variety of consumer sectors, from lifestyle, to fitness and workwear.

ISKO RHEACT stands out for its woven, gradual compression technology that helps boost the energy of the wearer through improved blood flow. It also provides a micro massaging effect by varying pressure in different areas of a garment. ISKO RHEACT is superior to knit compression as it works for up to 12 hours (compared to 3 hours) for any type of lifestyle – whether it’s taking a long-haul flight, lounging at home or during or after a workout where it helps with warming up before exercise and improves post-workout recovery. From a consumer standpoint, this translates to a garment that wears like a second skin, is durable, works to focus the mind, sharpens the senses, and energizes the body.

ISKO RHEACT products are certified by the independent Hohenstein Institute (Bönnigheim, Germany) and have received the endorsement of many physicians for their health and wellbeing benefits. They are also acknowledged by the US Food and Drug Administration (FDA) as general wellness products as per section 513(g) of the FD&C Act.

Source:

ISKO / Menabò Group

01.10.2021

Archroma celebrates 8 Years of creating positive impact

Archroma celebrates 8 years of leading the way to a sustainable world, with innovations and solutions aimed at creating added value sustainable for its partners, consumers and the planet.

Archroma came to life on 1st October 2013 from textile, paper and emulsions businesses acquired from Clariant by SK Capital Partners.
Building on decades of commitment to developing safer eco-friendlier chemistry, Archroma has become in the past 8 years a prominent name for more sustainable colors and performance, collaborating with leading brands such as Primark, G-Star, Patagonia, Esprit and more.

Archroma has introduced innovations, such as the EarthColors® made from non-edible plant waste from the food and herbal industry, Denisol® Pure, an indigo for aniline-free* denim, aniline being a category 2 carcinogen substance, and Smartrepel®, a PFC-free* water repellent solution. The company is also about to launch a new plant-based softener.

Archroma celebrates 8 years of leading the way to a sustainable world, with innovations and solutions aimed at creating added value sustainable for its partners, consumers and the planet.

Archroma came to life on 1st October 2013 from textile, paper and emulsions businesses acquired from Clariant by SK Capital Partners.
Building on decades of commitment to developing safer eco-friendlier chemistry, Archroma has become in the past 8 years a prominent name for more sustainable colors and performance, collaborating with leading brands such as Primark, G-Star, Patagonia, Esprit and more.

Archroma has introduced innovations, such as the EarthColors® made from non-edible plant waste from the food and herbal industry, Denisol® Pure, an indigo for aniline-free* denim, aniline being a category 2 carcinogen substance, and Smartrepel®, a PFC-free* water repellent solution. The company is also about to launch a new plant-based softener.

The company started to develop holistic solutions designed to bring innovation and performance, whilst reducing the impacts on water, energy and other natural resources. The savings generated by these 70+ system solutions are demonstrated by Archroma's proprietary ONE WAY Impact Calculator, a tool launched in 2012 and continuously upgraded to simulate and optimize the footprint of application processes.

Archroma also recently launched CASUAL X SMART, a sulfur dyeing system for trendy wash-down effects to make clothes that look smart at home and at work. The colors won't fade in the washing cycle, and the application process allows resource savings of up to 33% water, 21% energy and 35% chemical usage compared to a benchmark reactive & pigment garment dyeing.

With ONE WAY, a brand can calculate how much impact their current production and the Archroma Way collection will have on water, energy, chemical, raw material or CO2 footprint.

nova-Institute and YNCORIS are presenting the innovation award 2022: "Best CO2 Utilisation" (c) nova-Institut GmbH
30.09.2021

nova-Institute and YNCORIS are presenting the innovation award 2022: "Best CO2 Utilisation"

nova-Institute and YNCORIS together with CO2 Value Europe are looking forward to applications for the innovation award “Best CO2 Utilisation 2022”. The award will be granted at the well-established “Conference on CO2-based Fuels and Chemicals”, 23–24 March 2022 in Cologne.

With the innovation award “Best CO2 Utilisation 2022” together with YNCORIS and CO2 Value Europe, the nova-Institute offers innovators in the CCU field the unique opportunity to present and market their carbon capture or carbon utilisation (Power-to-X) technology, CO2-based fuel or chemical at one of the leading conferences on CO2 as a raw material. The only requirement for participation in the competition is that the product is already on the market or about to be launched in near future.

nova-Institute and YNCORIS together with CO2 Value Europe are looking forward to applications for the innovation award “Best CO2 Utilisation 2022”. The award will be granted at the well-established “Conference on CO2-based Fuels and Chemicals”, 23–24 March 2022 in Cologne.

With the innovation award “Best CO2 Utilisation 2022” together with YNCORIS and CO2 Value Europe, the nova-Institute offers innovators in the CCU field the unique opportunity to present and market their carbon capture or carbon utilisation (Power-to-X) technology, CO2-based fuel or chemical at one of the leading conferences on CO2 as a raw material. The only requirement for participation in the competition is that the product is already on the market or about to be launched in near future.

29.09.2021

Lenzing presented its sustainable processes at FILO

Lenzing presented at FILO its sustainable approach and on a selection of key innovations such as TENCEL™-branded specialty fibers.

As part of the space dedicated to Cittadellarte – Fondazione Pistoletto and Fashion B.E.S.T., the first Italian collective of responsible fashion designers, a selection of TENCEL™’s key technologies were under the spotlight:

Lenzing presented at FILO its sustainable approach and on a selection of key innovations such as TENCEL™-branded specialty fibers.

As part of the space dedicated to Cittadellarte – Fondazione Pistoletto and Fashion B.E.S.T., the first Italian collective of responsible fashion designers, a selection of TENCEL™’s key technologies were under the spotlight:

  • TENCEL™ x REFIBRA™, using cotton textile waste and wood pulp as the feedstock for cellulosic fibers, creating a circular solution;
  • TENCEL™ x Indigo Color, infusing pigment into fibers directly during the spinning process;
  • TENCEL™ Luxe, providing superior aesthetics, performance and comfort to be the perfect partner of other noble fibers such as silk, cashmere or wool;
  • TENCEL™ Carbon Zero, offering carbon-zero CarbonNeutral®-certified products by Natural Capital Partners;
  • TENCEL™ x Eco Clean, bringing totally chlorine-free-bleached TENCEL™ Modal fibers to the textile industry.

Lenzing's priority has been to produce fibers for many sectors (fashion, beauty care, cleaning, hygiene and home textiles) in a sustainable way. Each Lenzing product is made of cellulose from wood, a renewable natural resource, coming only from certified sustainable sources.
The Lenzing Group operates two commercial-scale biorefineries with 100% wood utilization, which ensure that the totality of wood constituents are used to produce fibers, biobased chemicals, and bioenergy, thus maximizing value creation from an economic and environmental perspective. This concept was illustrated by Carlo Covini, Lenzing Business Development Manager Italy & Switzerland, in his presentation “Lenzing’s biorefinery concept”.

Source:

Menabò Group

29.09.2021

The Renewable Materials Conference 2022

  • 10–12 May 2022, Cologne, Germany (hybrid)
  • The unique concept of presenting all renewable material solutions at one event hits the mark: bio-based, CO2-based and recycled are the only alternatives to fossil-based chemicals and materials

Ready-to-use fossil-free sustainable material solutions with a low carbon footprint are in fast-growing demand. Innovative brand owners are keeping an eye out for such solutions, in particular those that will soon reach the mainstream.

  • 10–12 May 2022, Cologne, Germany (hybrid)
  • The unique concept of presenting all renewable material solutions at one event hits the mark: bio-based, CO2-based and recycled are the only alternatives to fossil-based chemicals and materials

Ready-to-use fossil-free sustainable material solutions with a low carbon footprint are in fast-growing demand. Innovative brand owners are keeping an eye out for such solutions, in particular those that will soon reach the mainstream.

For the second time, nova-Institute presents numerous market highlights from bio- and CO2-based chemicals and materials as well as from chemical recycling: All material solutions based on renewable carbon. Together, there is sufficient potential to completely replace petrochemicals by 2050. To tackle climate change at its roots, all additional fossil carbon from the ground must be substituted with renewable alternatives. Over the course of three days, participants will get a comprehensive overview of the latest developments in the renewable material sector, with a focus on industry-ready solutions from a wide spectrum of sustainable raw materials and technologies.

In 2021, the new concept of the Renewable Materials Conference generated an outstanding response, which exceeded all expectations: 420 online participants witnessed a firework of innovations of non-fossil material. 60 speakers, 11 panel discussions, 500 public posts and 1,500 networking activities were proof of the lively exchange during the three conference days.

In 2022, nova-Institute plans to host the conference physically in the heart of Germany's fourth largest city, Cologne, just a few hours away from France, Belgium and the Netherlands. Expected are 400 participants on-site and many more online. On-site, the conference will be accompanied by a large exhibition where companies and institutes can showcase their recent developments. The supporting program, networking activities and many secluded spots at the location offers excellent opportunities to make new business contacts and refresh old ones.

The focus of the conference: All material solutions based on renewable carbon – avoiding the use of additional fossil carbon. The entire spectrum of renewable materials is covered: bio-based, CO2- based and recycled.

The program includes a diverse range of bio-based materials such as bio-based polymers, plastics and biocomposites (first and second generation, biowaste), CO2-based materials (from fossil and biogenic point sources, atmosphere) as well as mechanically and chemically recycled materials.

Source:

nova-Institut GmbH

Sustainability concept with more than 500 sustainable and innovative solutions (c) Freudenberg
The Freudenberg House of Sustainability
29.09.2021

The Freudenberg House of Sustainability

  • Sustainability concept with more than 500 sustainable and innovative solutions

Freudenberg Performance Materials Apparel (Freudenberg) is proud to announce its new House of Sustainability. The initiative is designed to assist customers worldwide in enhancing the sustainability of their products, thereby laying the groundwork for a more sustainable future together with Freudenberg. Customers will find more than 500 sustainable and innovative solutions of premium quality for a comprehensive range of applications in the apparel industry. With this initiative, Freudenberg is making its entire portfolio of sustainable solutions visible and transparent. At the same time, the leading global manufacturer of technical textiles is also driving its roadmap of forward-looking innovations.

  • Sustainability concept with more than 500 sustainable and innovative solutions

Freudenberg Performance Materials Apparel (Freudenberg) is proud to announce its new House of Sustainability. The initiative is designed to assist customers worldwide in enhancing the sustainability of their products, thereby laying the groundwork for a more sustainable future together with Freudenberg. Customers will find more than 500 sustainable and innovative solutions of premium quality for a comprehensive range of applications in the apparel industry. With this initiative, Freudenberg is making its entire portfolio of sustainable solutions visible and transparent. At the same time, the leading global manufacturer of technical textiles is also driving its roadmap of forward-looking innovations.

Sustainability has been an integral part of business activities ever since Freudenberg was established and the first values and principles were drawn up in 1887. Freudenberg aspires to reduce its own footprint and increase the handprint for customers and end users. This means the company strives to minimize the impact of its production processes on the environment (footprint) while helping customers achieve their sustainability goals by offering appropriate products and services (handprint).

The Freudenberg House of Sustainability

The foundation for the Freudenberg House of Sustainability is made up of four elements: Certifications & Regulations, Raw Materials, Technology and Carbon Footprint. This foundation supports seven pillars providing customers with more than 500 sustainable solutions. The House of Sustainability enables customers to choose the right solutions for their sustainable applications and to meet their sustainability goals efficiently. In addition, all Freudenberg services are visible and transparent.

Launch of the Freudenberg House of Sustainability

The House of Sustainability will be launched worldwide over a 12-week period. Each week, Freudenberg will post in-depth information about the elements and pillars on several channels. The complete House of Sustainability will be presented at ISPO Munich 2022.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

Design, e-commerce and sustainable development highlights of Intertextile Shanghai Home Textiles fringe programme (c) ITSH20
29.09.2021

Design, e-commerce and sustainable development highlights of Intertextile Shanghai Home Textiles fringe programme

The rescheduled Intertextile Shanghai Home Textiles, now taking place from 9 – 11 October, will once again provide the industry with insight into the future through its fringe programme’s four categories: Design Inspiration, Business O2O, Textiles & Technologies and Industry Empowerment. And with the Online Business Matching sourcing platform returning this edition, buyers worldwide can still participate in the fair.

Each of the fringe programme’s four categories – Design Inspiration, Business O2O (online to offline), Textiles & Technologies and Industry Empowerment – features a mix of conferences, seminars and presentations that reflect the future of the home textile industry. Highlights of each category are included below, while further details can be found on the fair’s website: https://intertextile-shanghai-hometextiles-autumn.hk.messefrankfurt.com/shanghai/en/programme-events.html.

The rescheduled Intertextile Shanghai Home Textiles, now taking place from 9 – 11 October, will once again provide the industry with insight into the future through its fringe programme’s four categories: Design Inspiration, Business O2O, Textiles & Technologies and Industry Empowerment. And with the Online Business Matching sourcing platform returning this edition, buyers worldwide can still participate in the fair.

Each of the fringe programme’s four categories – Design Inspiration, Business O2O (online to offline), Textiles & Technologies and Industry Empowerment – features a mix of conferences, seminars and presentations that reflect the future of the home textile industry. Highlights of each category are included below, while further details can be found on the fair’s website: https://intertextile-shanghai-hometextiles-autumn.hk.messefrankfurt.com/shanghai/en/programme-events.html.

Since 2019, Messe Frankfurt has been working with the Conscious Fashion Campaign and United Nations Office for Partnerships as part of the Texpertise Network and supports the UN Sustainable Development Goals. The goals will be presented gradually at global textile events in order to highlight the most pressing challenges facing the textile and fashion industry worldwide.

Industry Empowerment: antimicrobial technologies and licensing in the home textile sector

Growing awareness of health and hygiene has increased the demand for antimicrobial and other functional textiles. Seminars hosted by the Chinese Industry Association for Antimicrobial Materials & Products will further discuss the increasing prominence of these textiles, as well as how the adoption of new antimicrobial textile technologies is expected to evolve in the future. In addition, experts will share the new trends of licensing and IP with case studies for the furniture companies and fabric brands.

2022 China Home Textile Trends

The China Home Textiles Trend Area will feature the research of the China Home Textile Association, The Department of Home Textile Trend Research and Promotion and Concept & Style Fashion Project Group Italy who shared their knowledge, inspirations and exchanged their visions of trend evolutions considering consumer demand, retail expertise, the contract market and new technologies.

Intertextile Shanghai Home Textiles – Autumn Edition 2021 will be held concurrently with Intertextile Shanghai Apparel Fabrics – Autumn Edition, Yarn Expo Autumn, PH Value and CHIC at the National Exhibition and Convention Center. Intertextile Shanghai Home Textiles – Autumn Edition is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA).

29.09.2021

Suominen launches HYDRASPUN® Aquaflo

Suominen has successfully developed HYDRASPUN® Aquaflo, a moist toilet tissue with even better dispersibility. HYDRASPUN® Aquaflo offers near parity dispersion with dry toilet tissue but with premium thickness for a better consumer experience in use.

Suominen’s new flushable nonwovens substrate, HYDRASPUN® Aquaflo passed the stringent standards for dispersibility set by both the International Water Services Flushability Group (IWSFG) and INDA/EDANA (GD4) in independent testing.

“We are extremely proud to launch HYDRASPUN® Aquaflo. Its 100% cellulosic fiber composition is evidence of sustainable origins and its capability to fully and rapidly break down in wastewater provides biodegradability in disposal, giving consumers an end-to-end eco-friendly solution for personal care. Dry toilet tissue is recognized as the material most capable of breaking down in sewer systems and HYDRASPUN® Aquaflo was developed with this result in mind, “says Andrew Charleston, Manager, Category Management, Americas.

Suominen has successfully developed HYDRASPUN® Aquaflo, a moist toilet tissue with even better dispersibility. HYDRASPUN® Aquaflo offers near parity dispersion with dry toilet tissue but with premium thickness for a better consumer experience in use.

Suominen’s new flushable nonwovens substrate, HYDRASPUN® Aquaflo passed the stringent standards for dispersibility set by both the International Water Services Flushability Group (IWSFG) and INDA/EDANA (GD4) in independent testing.

“We are extremely proud to launch HYDRASPUN® Aquaflo. Its 100% cellulosic fiber composition is evidence of sustainable origins and its capability to fully and rapidly break down in wastewater provides biodegradability in disposal, giving consumers an end-to-end eco-friendly solution for personal care. Dry toilet tissue is recognized as the material most capable of breaking down in sewer systems and HYDRASPUN® Aquaflo was developed with this result in mind, “says Andrew Charleston, Manager, Category Management, Americas.

Source:

Suominen

29.09.2021

Archroma announces a general price increase across its portfolio

Effective 01 October 2021, Archroma will increase the prices of its products by up to 0.25 USD per kg. These adjustments will apply to all Archroma products globally. The increase is necessary to offset the ongoing exceptionally high freight and logistics costs.

“Archroma made every effort to absorb these increases,” says Marcos Furrer, Chief Operating Officer at Archroma. “We have however reached a point where these adjustments are needed for us to be able to maintain our service levels.”

Effective 01 October 2021, Archroma will increase the prices of its products by up to 0.25 USD per kg. These adjustments will apply to all Archroma products globally. The increase is necessary to offset the ongoing exceptionally high freight and logistics costs.

“Archroma made every effort to absorb these increases,” says Marcos Furrer, Chief Operating Officer at Archroma. “We have however reached a point where these adjustments are needed for us to be able to maintain our service levels.”

More information:
Archroma
Source:

EMG for Archroma

29.09.2021

Suominen’s HYDRASPUN® Regal receives Fine to Flush certification

Suominen has launched a second nonwoven product, HYDRASPUN® Regal, that has received the Fine to Flush Manufacturer’s Generic Certificate from Water UK. HYDRASPUN® Regal was developed to meet the increasing need for flushable wipes that are dispersible according to the Water UK’s flushability standard.

HYDRASPUN® Regal is made of plastic free and biodegradable raw materials, containing only cellulosic fibers. It also has a low-level carbon footprint due to its high pulp content.

Suominen was one of the first nonwoven substrate manufacturers to receive the Fine to Flush Manufacturer’s Generic Certificate from Water UK. The first certification was granted for HYDRASPUN® Royal in Spring 2020.

 

Suominen has launched a second nonwoven product, HYDRASPUN® Regal, that has received the Fine to Flush Manufacturer’s Generic Certificate from Water UK. HYDRASPUN® Regal was developed to meet the increasing need for flushable wipes that are dispersible according to the Water UK’s flushability standard.

HYDRASPUN® Regal is made of plastic free and biodegradable raw materials, containing only cellulosic fibers. It also has a low-level carbon footprint due to its high pulp content.

Suominen was one of the first nonwoven substrate manufacturers to receive the Fine to Flush Manufacturer’s Generic Certificate from Water UK. The first certification was granted for HYDRASPUN® Royal in Spring 2020.

 

Source:

Suominen

29.09.2021

INDA and EDANA publish the Global Nonwoven Markets Report

A new report published by the two nonwoven trade associations forecasts strong market demand for nonwovens materials through the next five years, according to the joint publication from EDANA and INDA’s Global Nonwoven Markets Report, A Comprehensive Survey and Outlook, 2020–2025.

This report provides information and analysis of the global nonwoven macro drivers, supply and demand, and regional trade. Among the highlights of the report:

  • In the historical period (2010–2020) production increased 6.2% annually, led by growth in the spunlaid processes and drylaid hydroentanglement.
  • China led the growth in production, adding an additional 4.7 million tonnes from the end of 2010 through to the end of 2020, representing a 11.5% annual growth rate.
  • Across the nonwoven end use segments, the wipes, filtration, medical segments expanded at the fastest rates, given the industry’s rapid response to provide materials that keep the surfaces we touch clean, protect the air we breathe, and provide a barrier to keep our bodies safe.

A new report published by the two nonwoven trade associations forecasts strong market demand for nonwovens materials through the next five years, according to the joint publication from EDANA and INDA’s Global Nonwoven Markets Report, A Comprehensive Survey and Outlook, 2020–2025.

This report provides information and analysis of the global nonwoven macro drivers, supply and demand, and regional trade. Among the highlights of the report:

  • In the historical period (2010–2020) production increased 6.2% annually, led by growth in the spunlaid processes and drylaid hydroentanglement.
  • China led the growth in production, adding an additional 4.7 million tonnes from the end of 2010 through to the end of 2020, representing a 11.5% annual growth rate.
  • Across the nonwoven end use segments, the wipes, filtration, medical segments expanded at the fastest rates, given the industry’s rapid response to provide materials that keep the surfaces we touch clean, protect the air we breathe, and provide a barrier to keep our bodies safe.
Source:

INDA