From the Sector

from to
Reset
65 results
(c) Kai-Chieh Kuo
17.11.2021

ITA PhD student Kai-Chieh Kuo was awarded Best Master’s Thesis Award of Walter Reiners-Stiftung

Kai-Chieh Kuo, PhD student at the Institut für Textiltechnik (ITA) of RWTH Aachen University, was awarded the German Textile Mechanical Engineering 2021 Best Master's Thesis Award for his master's thesis entitled "Modification of the tube weaving process of fine yarns for the production of woven ultra-low profile stent grafts". The prize is endowed with 3,500€. Peter D. Dornier, Chairman of the Board of the Walter Reiners-Stiftung (Foundation), virtually presented the award on the occasion of the ADD International Textile Conference on 9 November 2021.

Kai-Chieh Kuo, PhD student at the Institut für Textiltechnik (ITA) of RWTH Aachen University, was awarded the German Textile Mechanical Engineering 2021 Best Master's Thesis Award for his master's thesis entitled "Modification of the tube weaving process of fine yarns for the production of woven ultra-low profile stent grafts". The prize is endowed with 3,500€. Peter D. Dornier, Chairman of the Board of the Walter Reiners-Stiftung (Foundation), virtually presented the award on the occasion of the ADD International Textile Conference on 9 November 2021.

Minimally invasive endovascular aortic repair (EVAR) with textile stent-graft systems is nowadays a clinically established therapy procedure for the treatment of abdominal aortic aneurysms (AAA) – pathological bulges of the aorta. Due to the thick profile of the folded stent graft systems, there is currently a high risk of injuring narrowed or highly angulated access vessels from the inside during implantation. Stent graft systems with smaller profiles could provide an improvement, which could overcome complicated access routes through a lower bending stiffness. One possible approach for reducing the system profiles is the use of thin-walled tubular woven fabrics made of ultrafine multifilament yarns (≤20 dtex) as graft material.

Up to now, it has not been possible to process the fine yarns with the required high thread density (>200 threads/cm) and the available weaving technology in order to guarantee sufficient tightness against blood.

In his master's thesis, Kai-Chieh Kuo made high-density tubular weaving of ultra-fine filament yarns possible for the first time by means of suitable modifications to a shuttle loom as well as adaptations in the weaving preparation. In particular, he developed a new innovative reed technology that reduces warp thread friction during the shedding process and thus improves the process stability of the dense tube weaving process of fine yarns.

With the help of the process modification, it was then possible to produce high-density, thin-walled tubular woven fabrics, which were positively evaluated with regard to their suitability for a stent graft. Above all the potential of these tubular fabrics lies in their extremely thin-walled fabric profile, which seals well against blood. By using these new types of tubular fabrics as graft material for stent grafts, the system profile of the folded stent graft system can be reduced without having to compromise the blood tightness of the implant. The technology developed by Mr Kuo is not only applicable to stent graft systems, but also offers great possibilities for use in all other endovascular implants such as trans catheter heart valves, covered stents and small-lumen vascular prostheses.

Mahlo: Two heads of subsidiaries celebrate anniversaries (c) Mahlo
Michel Bruni, CEO of Mahlo Italia
16.11.2021

Mahlo: Two heads of subsidiaries celebrate anniversaries

At the subsidiaries of the German Mahlo GmbH + Co KG, two branch managers are celebrating anniversaries this year. Alan Lavore, CEO of Mahlo America Inc., has been with the machine builder for 25 years. Michel Bruni, CEO of Mahlo Italia, has been part of the Mahlo family for 40 years.

Bruni began his career at Mahlo in 1981 as a service technician in the French branch Mahlo Ouest. Just one year later, he moved to Mahlo Italia, where he was appointed branch manager in 1996. He still holds this position today. Bruni is also sales manager for the Benelux countries, the Maghreb countries and Madagascar. The Mahlo Italia CEO's recipe for success includes expertise paired with experience and passion. To remain loyal to a company for so many years also testifies to a special relationship. "Then as now, I work with a dynamic and committed team. We also have a very good relationship with the employees of the parent company in Germany," says Bruni.

At the subsidiaries of the German Mahlo GmbH + Co KG, two branch managers are celebrating anniversaries this year. Alan Lavore, CEO of Mahlo America Inc., has been with the machine builder for 25 years. Michel Bruni, CEO of Mahlo Italia, has been part of the Mahlo family for 40 years.

Bruni began his career at Mahlo in 1981 as a service technician in the French branch Mahlo Ouest. Just one year later, he moved to Mahlo Italia, where he was appointed branch manager in 1996. He still holds this position today. Bruni is also sales manager for the Benelux countries, the Maghreb countries and Madagascar. The Mahlo Italia CEO's recipe for success includes expertise paired with experience and passion. To remain loyal to a company for so many years also testifies to a special relationship. "Then as now, I work with a dynamic and committed team. We also have a very good relationship with the employees of the parent company in Germany," says Bruni.

The culture and integrity with which business is conducted in the family-owned company were among the reasons why Mahlo America Inc. CEO Alan Lavore has also been with Mahlo for 25 years. "I just love working with all the great people at Mahlo." Lavore joined Mahlo in 1996 as a territory sales manager and took over as CEO in 2005. During this time, he drove the company's expansion from a textile specialist to a supplier for various production sectors such as film, paper, coating and converting or nonwovens.

More information:
Mahlo nonwovens Automation
Source:

Mahlo GmbH + Co. KG

DiloGroup: successful INDEX exhibition (c) DiloGroup
DiloGroup at the INDEX
10.11.2021

DiloGroup: successful INDEX exhibition

DiloGroup would like to thank all customers and interested parties for visiting the Dilo booth in Geneva. Despite the existing worldwide Covid, we were able to welcome a great number of well-known faces as well as meet new contacts, among them the most important nonwovens producers from across the world in all application areas: hygiene and lightweight nonwovens, technical textiles and needled nonwovens including geotextiles, filter media and automotive. The interest in using resource saving plant engineering, energy saving and the processing of natural fibres remains.

DiloGroup would like to thank all customers and interested parties for visiting the Dilo booth in Geneva. Despite the existing worldwide Covid, we were able to welcome a great number of well-known faces as well as meet new contacts, among them the most important nonwovens producers from across the world in all application areas: hygiene and lightweight nonwovens, technical textiles and needled nonwovens including geotextiles, filter media and automotive. The interest in using resource saving plant engineering, energy saving and the processing of natural fibres remains.

Dilo presented its latest developments in industry 4.0. Systematic plant monitoring and analysis of machine data allows simplified operation and more effective production. This smart system was illustrated with the aid of live analysis of the performance, quality and availability parameters of the production lines in our Textile Research Centre. The new production systems Hyperpunch Alpha, HyperTex and 3D-Lofter were explained with the aid of videos which led to a very positive responsive from the many different producers which are interested in running trials at the Dilo Textile Research Centre to further explore these subjects. These highlights and further new developments were the basis for fruitful technical discussions.

Source:

Oskar Dilo Maschinenfabrik KG

VDMA: Top young talent with cutting-edge topics  (c) VDMA
The 2021 winners (from top left to right): Dr Martin Hengstermann, Irina Kuznik, Kai-Chieh Kuo.
10.11.2021

VDMA: Top young talent with cutting-edge topics

The Chairman of the Walter Reiners-Stiftung foundation of the VDMA Textile Machinery Association, Peter D. Dornier has awarded prizes to three successful young engineers. The award-winning works provide practical solutions on the topic of circular economy. For example, the recycling of carbon fibres, which are used to produce lightweight components for the automotive industry. Or the environmentally friendly production of yarns from crab shells. Another topic was medical applications: The processing of ultra-fine yarns into stents for aortic repair. The award ceremony took place online on 9 November as part of the Aachen-Dresden-Denkendorf International Textile Conference.  

With a creativity prize, endowed with 3,000 euros, the foundation honoured the diploma thesis of Irina Kuznik, TU Dresden. She used a creative approach to realise solutions for processing chitosan into fibre yarn.

The Chairman of the Walter Reiners-Stiftung foundation of the VDMA Textile Machinery Association, Peter D. Dornier has awarded prizes to three successful young engineers. The award-winning works provide practical solutions on the topic of circular economy. For example, the recycling of carbon fibres, which are used to produce lightweight components for the automotive industry. Or the environmentally friendly production of yarns from crab shells. Another topic was medical applications: The processing of ultra-fine yarns into stents for aortic repair. The award ceremony took place online on 9 November as part of the Aachen-Dresden-Denkendorf International Textile Conference.  

With a creativity prize, endowed with 3,000 euros, the foundation honoured the diploma thesis of Irina Kuznik, TU Dresden. She used a creative approach to realise solutions for processing chitosan into fibre yarn.

Mr Kai-Chieh Kuo was awarded the diploma/master's thesis promotion prize of 3,500 euros. With his master's thesis, which was written at RWTH Aachen University, Mr Kuo contributes to the production of vital components used in medicine. The stents made of ultra-fine yarns are made possible by an innovative modification of the classic tube weaving process.

The Walter Reiners Foundation rewarded the doctoral thesis of Dr. Martin Hengstermann with the promotional prize in the dissertation category, endowed with 5,000 euros. The thesis deals with the production of recycled carbon fibres. These can be used to produce lightweight components for motor vehicle and aircraft construction or the wind energy sector.

New Prize Sustainability / Circular Economy
The environmental conditions of the textile industry and machine construction are changing. Topics such as climate protection and the circular economy are becoming central. From this perspective, the board of the Walter Reiners Foundation has decided to further develop the foundation's prize system.

In 2022, the foundation will for the first time offer a prize with a focus on design / sustainability. Peter D. Dornier, Chairman of the Foundation, explained: "Already in the design phase, one can set the parameters so that a textile product can be reintroduced after use into the economic cycle for a high-quality application. For example, through the appropriate use of materials and finishing. We are looking for solutions for resource-saving design, technology and manufacturing processes."   

With the "SmartTex" shirt, astronauts can wear the necessary sensors comfortably on their bodies. © DLR
SmartTex Shirt
27.10.2021

Research for cosmic missions: SmartTex provides data on vital functions

It looks like a normal shirt, but it has it all: The new SmartTex shirt uses integrated sensors to transfer physiological data from astronauts to Earth via a wireless communication network. In this way, the effects of the space environment on the human cardiovascular system will be evaluated and documented, especially with regard to long-term manned space missions. Developed by the German Aerospace Center (DLR) in cooperation with DSI Aerospace Technology, the Medical Faculty of Bielefeld University and textile research partner Hohenstein, SmartTex will be tested for the first time as part of the Wireless Compose-2 (WICO2) project by German ESA astronaut Dr. Matthias Maurer, who will leave for his ‘Cosmic Kiss’ mission on the International Space Station (ISS) for six months on October 30, 2021.

It looks like a normal shirt, but it has it all: The new SmartTex shirt uses integrated sensors to transfer physiological data from astronauts to Earth via a wireless communication network. In this way, the effects of the space environment on the human cardiovascular system will be evaluated and documented, especially with regard to long-term manned space missions. Developed by the German Aerospace Center (DLR) in cooperation with DSI Aerospace Technology, the Medical Faculty of Bielefeld University and textile research partner Hohenstein, SmartTex will be tested for the first time as part of the Wireless Compose-2 (WICO2) project by German ESA astronaut Dr. Matthias Maurer, who will leave for his ‘Cosmic Kiss’ mission on the International Space Station (ISS) for six months on October 30, 2021.

"We were already able to gain valuable insights into the interaction of the body, clothing and climate under microgravity conditions during the previous projects Spacetex (2014) and Spacetex2 (2018)," explains Hohenstein Senior Scientific Expert Dr. Jan Beringer. The insights provided at the time by the mission of ESA astronaut Dr. Alexander Gerst have now been directly incorporated into the development of the new SmartTex shirt at Hohenstein. "Matthias Maurer can wear his tailor-made shirt comfortably on his body during his everyday work on the International Space Station. For this, we used his body measurements as the basis for our cut development and the production of the shirt. We integrated the necessary sensors as well as data processing and communication modules into the shirt's cut in such a way that they interfere as little as possible and are always positioned in the right place, regardless of the wearing situation. This is the prerequisite for reliably measuring the relevant physiological data." The SmartTex shirt is intended to provide a continuous picture of the vital functions of astronauts. This will be particularly relevant for future long-term manned space missions to the Moon and Mars.

For example, during the BEAT experiment (Ballistocardiography for Extraterrestrial Applications and long-Term missions), Matthias Maurer will be the first astronaut to wear a T-shirt equipped with sensors that measure his ballistocardiographic data such as pulse and relative blood pressure. For this purpose, the sensors were calibrated in the :envihab research facility at the DLR Institute of Aerospace Medicine in Cologne. Details on the contraction rate and opening and closing times of the heart valves, which are normally only accessible via sonography or computer tomography, can also be read from the data material. The goal is to study the effects of the space environment on the human cardiovascular system. To be able to analyse these effects realistically, Matthias Maurer's ballistocardiographic data will be recorded before, during and after his stay on the ISS. For the future, a technology transfer of the SmartTex shirt for application in the field of fitness or even in telemedicine is conceivable.

Wireless Compose-2 (WICO2)
The project was planned and prepared by the German Aerospace Center (DLR) and its cooperation partners DSI Aerospace Technology, Hohenstein and the University of Bielefeld. The wireless communication network reads sensor data and can determine the position of people and objects in space by propagation times of radio pulses. It is also available as a platform for several experiments on the ISS. The determined data is temporarily stored within the network and read out at regular intervals by the astronauts. These data packets are then transferred to Earth via the ISS link and analysed by the research teams. It can generate its own energy from artificial light sources via solar cells.

 

 

ESA astronaut Dr. Matthias Maurer in summer 2021 during preliminary talks on the Cosmic Kiss mission in DLR's :envihab in Cologne. © DLR


Sensors measure physiological data during a test run on Earth. © DLR


With the "SmartTex" shirt, astronauts can wear the necessary sensors comfortably on their bodies. © DLR

Dr. Jan Beringer, Hohenstein Senior Scientific Expert. © Hohenstein

Rieter CAMPUS – Foundation Stone Laid (c) Rieter
Rieter Campus Winterthur
09.09.2021

Rieter CAMPUS – Foundation Stone Laid

  • Rieter CAMPUS strengthens innovation strategy and technology leadership position
  • Customer and technology center and administration building ready for occupancy in 2024
  • Commitment to the Winterthur site and to Switzerland as a business location

On September 8, 2021, the foundation stone was laid for the Rieter CAMPUS on the western part of the Rieter site at the Winterthur location, which includes a customer and technology center as well as an administration building. The Rieter CAMPUS will make an important contribution to the implementation of the innovation strategy and to the enhancement of the company’s technology leadership position. At the same time, the investment of around CHF 80 million is a commitment to the Winterthur site and to Switzerland as a business location. 

  • Rieter CAMPUS strengthens innovation strategy and technology leadership position
  • Customer and technology center and administration building ready for occupancy in 2024
  • Commitment to the Winterthur site and to Switzerland as a business location

On September 8, 2021, the foundation stone was laid for the Rieter CAMPUS on the western part of the Rieter site at the Winterthur location, which includes a customer and technology center as well as an administration building. The Rieter CAMPUS will make an important contribution to the implementation of the innovation strategy and to the enhancement of the company’s technology leadership position. At the same time, the investment of around CHF 80 million is a commitment to the Winterthur site and to Switzerland as a business location. 

With a floor area of over 30 000 m2, the Rieter CAMPUS offers space for around   700 ultra-modern workplaces. For this purpose, Rieter and a specialist in office architecture have developed a contemporary space concept for the “Open Space Office” that is tailored to the needs of the company, divided into meeting rooms, focus rooms and some individual offices. The underground car park provides   88 parking spaces, and a further 12 outdoor parking spaces are being created   in front of the technology center.  “In the course of its 225-year company history, Rieter has helped shape the city of Winterthur. The foundation for the future as a leading technology company is now being created with the new CAMPUS. In this way, Rieter is giving a clear indication   of its commitment to the Winterthur site and to Switzerland as a business location”, commented Bernhard Jucker, Chairman of the Board of Directors of Rieter Holding AG.

Innovation is an important part of Rieter’s strategy and crucial for the company’s success. For this reason, Rieter invests more than CHF 50 million annually in research and development. Thanks to this commitment, Rieter is making a   decisive contribution to the further development of systems for sustainable yarn production and their digitization. The Rieter CAMPUS will provide an attractive working environment that promotes creativity and innovation.  The new CAMPUS is a showcase project in terms of economic feasibility, energy efficiency and sustainability. Rieter relies on renewable energy for construction. This includes heat generation via geothermal probes and a photovoltaic system on around 1 300 m2 of roof area. “In this way, the entrepreneurial focus on sustainable and energy-efficient solutions for yarn production is reflected in the overall concept of the CAMPUS,” emphasized Rieter CEO Norbert Klapper.  The move into the new building is planned for 2024.

Source:

Rieter Management AG

(c) Schoeller Textil AG
19.07.2021

Change in leadership at Schoeller Textil AG: Kath succeeds Winkelbeiner

Schoeller Textil AG, the Swiss textile and technology company, announces a shift in leadership as Joachim Kath takes over as CEO. Following a 10-year career at the global textile solutions brand, CEO Siegfried Winkelbeiner is moving into his retirement later this month. Joachim Kath, who comes from the chemical industry, has been working closely with Winkelbeiner as COO at Schoeller for the past year and a half.

Schoeller Textil AG, the Swiss textile and technology company, announces a shift in leadership as Joachim Kath takes over as CEO. Following a 10-year career at the global textile solutions brand, CEO Siegfried Winkelbeiner is moving into his retirement later this month. Joachim Kath, who comes from the chemical industry, has been working closely with Winkelbeiner as COO at Schoeller for the past year and a half.

The transition comes after long-term planning. Since February 2020, and in close partnership with Siegfried Winkelbeiner, Joachim Kath (on the left) has been preparing as Schoeller COO to take over its management. Joachim Kath originally comes from Flensburg (DE) and, following his studies of Chemical Engineering in Karlsruhe, shaped his professional career in the chemical industry with Ciba (-Geigy) / BASF in Basel (CH). His career over 30 years has incorporated engineering, production and marketing & sales in diverse management functions – in a wide range of business segments for various industries and areas of application around the globe. Joachim Kath spent 12 years of his career dedicated to textile finishing, with a period of intensive travel in Asia and a 3-year stay in the USA.

Asked how he sees himself, Joachim Kath said: “The common thread running through all my assignments and business activities is process orientation, interest in new paths, and an instinct for what is feasible – with the goal of achieving customer benefits and satisfaction. Kath aims to ensure that Schoeller can continue to face the challenges of changing market requirements with outstanding and exceptional products, while evolving and innovating to stay ahead of consumer needs for the future. High performance capability, sustainable product development, premium quality, reliability, productivity, and keeping the customer as the central focus of all activities continue as essential keys to Schoeller’s continued business success.

Source:

Schoeller Textil AG

(c) Tom Schulze. “IQ Innovationspreis Mitteldeutschland“, overall winner (from left to right) FibreCoat GmbH from Aachen, ITA graduate Dr Robert Brüll, Deutsche Basalt Fiber GmbH from Sangerhausen, Georgi Gogoladze.
28.06.2021

Overall prize of the “IQ Innovationspreis Mitteldeutschland“ for FibreCoat GmbH and DBF Deutsche Basalt Faser GmbH

FibreCoat GmbH from Aachen, Germany, together with DBF Deutsche Basalt GmbH, developed a completely new type of fibre material to shield electromagnetic radiation from digital end devices, medical technology or e-car batteries cheaply and effectively. The joint project was awarded the overall prize of the“ IQ Innovationspreises Mitteldeutschland“ on 24 June in an online event broadcast live from Leipzig.

The prize is endowed with €15,000 and was sponsored by the Halle-Dessau, Leipzig and East Thuringia Chambers of Industry and Commerce.

FibreCoat GmbH from Aachen, Germany, together with DBF Deutsche Basalt GmbH, developed a completely new type of fibre material to shield electromagnetic radiation from digital end devices, medical technology or e-car batteries cheaply and effectively. The joint project was awarded the overall prize of the“ IQ Innovationspreises Mitteldeutschland“ on 24 June in an online event broadcast live from Leipzig.

The prize is endowed with €15,000 and was sponsored by the Halle-Dessau, Leipzig and East Thuringia Chambers of Industry and Commerce.

Electromagnetic radiation from smartphones, hospital diagnostics and electric car batteries must be shielded so that they do not inter-fere with each other. To prevent mutual interference, they have so far been covered with metal fibre fabrics, a very time- and energy-consuming and thus expensive procedure. The new material from Basalt Faser GmbH and FibreCoat GmbH prevents this with a fibre core made of melted, thinly drawn basalt, which is coated with aluminium and bundled into the so-called AluCoat yarn. This yarn remains just as conductive and shielding, but is lighter, stronger, cheaper and more sustainable than previous alternatives. In addition, there are further advantages:

  • The number of process steps required is reduced from ten to one.
  • 1,500 metres of yarn are produced per minute instead of the previous five metres.
  • The energy required is only 10 per cent of the previous amount.

The result is a price that is twenty times lower.

The textile made of AluCoat fibres is versatile and flexible: as wallpaper it can shield 5G radiation in offices or medical rooms or encase batteries and thus ensure the smooth functioning of electric cars. AluCoat is already being used in some companies. A European fibre centre in Sangerhausen is being planned for mass production.

The two innovative companies DBF Deutsche Basalt GmbH and FibreCoat GmbH from East and West combine the two materials basalt and aluminium to protect against electromagnetic radiation. In doing so, they coat basalt with aluminium and, through this novel combination, create an inexpensive, sustainable and quickly produced alter-native for a market worth billions.

FibreCoat GmbH from Aachen is a spin-off of the Institut für Textiltechnik (ITA) of RWTH Aachen University; the managing directors Dr Robert Brüll and Alexander Lüking and Richard Haas have completed their doctorates at the ITA or are in the process of preparing their doctorates. Georgi Gogoladze, Managing Director of Deutsche Basaltfaser GmbH, also studied at RWTH Aachen University. The two managing directors Brüll and Gogoladze know each other from their student days.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen University

04.06.2021

Election of a new EPTA Board

During its members meeting of June 2nd, 2021, the European Pultrusion Technology Association (EPTA) elected a new board. All EPTA board members who stood for re-election have been confirmed again. Dr. Elmar Witten, Secretary of the EPTA, is happy about the continuity in the line-up of the EPTA board. "We will continue the current marketing activities to promote the pultrusion process," said Witten.

Thus, the board members for the next 4 years are:
Dr. Luigi Giamundo, ATP srl., Italy (Chairman)
Alfonso Branca, TOP GLASS, Italy
Dietmar Kühne, Ernst Kühne Kunststoffwerk, Germany
Sebastian Mehrtens, Fibrolux, Germany
Eric Moussiaux, Exel Composites, Belgium
Martin Zelinka, Owens Corning, France

Pultrusion is an important and continuously growing segment in the composites industry. It is a continuous manufacturing process of linear composite profiles made of polymeric resins such as polyesters and fiber reinforcement such as glass fibers. Automated Pultrusion Production Technology facilitates today's High Quality and Low-Cost demands by the market.

During its members meeting of June 2nd, 2021, the European Pultrusion Technology Association (EPTA) elected a new board. All EPTA board members who stood for re-election have been confirmed again. Dr. Elmar Witten, Secretary of the EPTA, is happy about the continuity in the line-up of the EPTA board. "We will continue the current marketing activities to promote the pultrusion process," said Witten.

Thus, the board members for the next 4 years are:
Dr. Luigi Giamundo, ATP srl., Italy (Chairman)
Alfonso Branca, TOP GLASS, Italy
Dietmar Kühne, Ernst Kühne Kunststoffwerk, Germany
Sebastian Mehrtens, Fibrolux, Germany
Eric Moussiaux, Exel Composites, Belgium
Martin Zelinka, Owens Corning, France

Pultrusion is an important and continuously growing segment in the composites industry. It is a continuous manufacturing process of linear composite profiles made of polymeric resins such as polyesters and fiber reinforcement such as glass fibers. Automated Pultrusion Production Technology facilitates today's High Quality and Low-Cost demands by the market.

Mimaki appoints Mark Sollman as Product Manager EMEA (c) Mimaki Europe BV
Mark Sollman, Product Manager EMEA
21.05.2021

Mimaki appoints Mark Sollman as Product Manager EMEA

Mimaki, a manufacturer of inkjet printers and cutting systems, has today announced that long-standing employee, Mark Sollman, will be appointed to the role of Product Manager, EMEA on the 1st July 2021. Sollman has been with Mimaki for over 15 years and as such, his extensive knowledge of the business and its diverse product portfolio makes him the clear choice for this esteemed management position.

Sollman will be succeeding Bert Benckhuysen. After four years with Mimaki, Benckhuysen has decided to take on a new challenge as Business Development Director at Colourama. A valued Mimaki customer, Colourama is a company Benckhuysen knows well, having also previously been employed as Production Manager at this thriving Polish textile printer.

Mimaki, a manufacturer of inkjet printers and cutting systems, has today announced that long-standing employee, Mark Sollman, will be appointed to the role of Product Manager, EMEA on the 1st July 2021. Sollman has been with Mimaki for over 15 years and as such, his extensive knowledge of the business and its diverse product portfolio makes him the clear choice for this esteemed management position.

Sollman will be succeeding Bert Benckhuysen. After four years with Mimaki, Benckhuysen has decided to take on a new challenge as Business Development Director at Colourama. A valued Mimaki customer, Colourama is a company Benckhuysen knows well, having also previously been employed as Production Manager at this thriving Polish textile printer.

Source:

Mimaki Europe B.V / Bespoke

14.04.2021

Resolutions adopted by the virtual Annual General Meeting of Lenzing AG

At the 77th Annual General Meeting of Lenzing AG, which was once again held virtually on April 14, 2021 via livestream due to the COVID-19 pandemic, the members of the Managing Board and Supervisory Board were formally discharged from liability for the business year 2020. KPMG Austria GmbH Wirtschaftsprüfungs- u. Steuerberatungsgesellschaft was appointed to serve as the auditor of the annual financial statements and consolidated annual financial statements for the business year 2021.

Furthermore, the Annual General Meeting adopted the resolution on the compensation to be paid to Supervisory Board members as well as the principles underlying the remuneration of the members of the Managing Board. In addition to financial performance criteria, the remuneration policy of Lenzing AG regulating the multi-year, performance-oriented remuneration paid to the Managing Board members will also be linked in the future to non-financial sustainability criteria (ESG) designed to further promote the sustainable business strategy of Lenzing AG.

At the 77th Annual General Meeting of Lenzing AG, which was once again held virtually on April 14, 2021 via livestream due to the COVID-19 pandemic, the members of the Managing Board and Supervisory Board were formally discharged from liability for the business year 2020. KPMG Austria GmbH Wirtschaftsprüfungs- u. Steuerberatungsgesellschaft was appointed to serve as the auditor of the annual financial statements and consolidated annual financial statements for the business year 2021.

Furthermore, the Annual General Meeting adopted the resolution on the compensation to be paid to Supervisory Board members as well as the principles underlying the remuneration of the members of the Managing Board. In addition to financial performance criteria, the remuneration policy of Lenzing AG regulating the multi-year, performance-oriented remuneration paid to the Managing Board members will also be linked in the future to non-financial sustainability criteria (ESG) designed to further promote the sustainable business strategy of Lenzing AG.

Fully on track strategically
The Managing Board of Lenzing AG presented the business development of the year 2020, a strategic outlook and sustainability strategy including the relevant roadmap to achieve climate targets to the participating shareholders. In 2019, Lenzing made a strategic commitment to reducing its greenhouse gas emissions per ton of product by 50 percent by the year 2030. The goal is to operate in a climate-neutral manner by 2050.

The substantial investments made in Thailand and Brazil not only support Lenzing in its transformation to a supplier of environmentally compatible specialty fibers but also comprise an important milestone on this journey which sustainably increases the company’s enterprise value.

The implementation of these two key projects is proceeding ahead as planned in spite of the direct impacts of the coronavirus crisis. The pulp plant in Brazil is scheduled to be put into operation in the first half of 2022 and will significantly increase Lenzing’s own in-house supply of dissolving pulp. Production in Thailand is expected to commence towards the end of 2021, further raising the share of eco-friendly specialty fibers in the Lenzing product portfolio.

New appointments to the Supervisory Board
Dr. Veit Sorger retired from the Supervisory Board of Lenzing AG on his request effective at the end of the Annual General Meeting. Veit Sorger had been a Member of the Supervisory Board since 2004 (also serving as Deputy Chairman since 2011) and served on various Supervisory Board committees.

The Annual General Meeting elected Dr. Markus Fürst, Managing Director of B&C Industrieholding GmbH, and Thomas Cord Prinzhorn, MBA, CEO of Prinzhorn Holding GmbH, to serve on the Supervisory Board until the end of the Annual General Meeting resolving upon the discharge of the Supervisory Board members for the business year 2024.

Source:

Lenzing AG

24.03.2021

NCTO elects Chairman, Council Chairs and Board Members

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished sewn products, held its officer elections for fiscal year 2021 today.

NCTO has re-elected David Roberts, CEO of Cap Yarns, as Chairman and David Poston, President of Palmetto Synthetics, as Vice Chairman.

In addition to the appointment of a new chairman and vice chairman, NCTO elected chairs for each of its four councils. NCTO is comprised of four councils to ensure a broad representation of the industry supply chain. Each council has an allotted number of members who are elected to the association’s Board of Directors, in addition to the Executive Committee.*

“This is a critical juncture for our industry, which answered the call of the nation to produce lifesaving personal protective equipment (PPE) for frontline workers battling the COVID-19 pandemic,” said NCTO President and CEO Kim. “We will continue to engage with all stakeholders to press for policies that support the industry overall, help onshore PPE production and create a permanent domestic supply chain.”

 

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished sewn products, held its officer elections for fiscal year 2021 today.

NCTO has re-elected David Roberts, CEO of Cap Yarns, as Chairman and David Poston, President of Palmetto Synthetics, as Vice Chairman.

In addition to the appointment of a new chairman and vice chairman, NCTO elected chairs for each of its four councils. NCTO is comprised of four councils to ensure a broad representation of the industry supply chain. Each council has an allotted number of members who are elected to the association’s Board of Directors, in addition to the Executive Committee.*

“This is a critical juncture for our industry, which answered the call of the nation to produce lifesaving personal protective equipment (PPE) for frontline workers battling the COVID-19 pandemic,” said NCTO President and CEO Kim. “We will continue to engage with all stakeholders to press for policies that support the industry overall, help onshore PPE production and create a permanent domestic supply chain.”

 

*See attached document for more information.

21.01.2021

NCTO welcomes President Biden’s action plan and Covid-19 Response

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement today welcoming President Biden’s action plan and COVID-19 response, accompanied by a series of executive orders, including an order signed today to strengthen U.S. supply chains by directing federal agencies to use the Defense Production Act (DPA) to address shortages of personal protective equipment (PPE) and related vaccine supplies.

“We are closely reviewing President Biden’s national strategic plan to confront the pandemic and welcome the executive order signed today to strengthen our supply chains by directing all federal agencies to use the Defense Production Act to address shortages of personal protective equipment, vaccine supplies and essential products. These are important steps that will help ramp up critical manufacturing of these essential PPE products and other critically needed supplies like tests and vaccines.”

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement today welcoming President Biden’s action plan and COVID-19 response, accompanied by a series of executive orders, including an order signed today to strengthen U.S. supply chains by directing federal agencies to use the Defense Production Act (DPA) to address shortages of personal protective equipment (PPE) and related vaccine supplies.

“We are closely reviewing President Biden’s national strategic plan to confront the pandemic and welcome the executive order signed today to strengthen our supply chains by directing all federal agencies to use the Defense Production Act to address shortages of personal protective equipment, vaccine supplies and essential products. These are important steps that will help ramp up critical manufacturing of these essential PPE products and other critically needed supplies like tests and vaccines.”

American manufacturers have been at the forefront of the effort to build a domestic PPE supply chain since the onset of the COVID-19 pandemic. The U.S. textile industry retooled production and operations virtually overnight, producing millions of face masks, isolation gowns, testing swabs and other critical medical textiles.

The industry is dedicated to making significant investments in automated equipment for PPE, but the industry needs long-term, multiyear contracts to help realize that investment.

The deployment of DPA is one of the critical tools that will help incentivize investment in equipment, propel the hiring of U.S. workers and expand these critical production chains.

Since its inception, the DPA has been utilized by the Department of Defense to make critical investments in domestic textile manufacturing infrastructure and capacity, creating private-public partnerships through the government’s capital investments under the DPA and guaranteeing purchases through long-term contracts.  

NCTO applaud President Biden’s action and anticipate further steps including a reported order that will seek to strengthen government procurement of U.S. products in the coming days. NCTO appreciate President Biden outlining the “National Strategy for the COVID-19 Response and Pandemic Preparedness” a series of actions and steps the administration will undertake to deploy and manufacture the vaccine and other essential products.

Source:

National Council of Textile Organizations

21.01.2021

Autoneum: Revenue development and personnel changes

Reflecting the pandemic-related drop in worldwide vehicle production, Autoneum’s revenue in local currencies fell by –18.7% in 2020, although the second half of the year saw a significant market recovery. Group revenue in Swiss francs fell by –24.2% year-on-year to CHF 1 740.6 million. For the full year 2020, the EBIT margin will be around 1.5% and the free cash flow slightly over CHF 100 million.
At the Annual General Meeting on March 25, 2021, the Board of Directors will propose Liane Hirner and Oliver Streuli for election to the Board of Directors of Autoneum Holding. Peter Spuhler will not stand for re-election.

Reflecting the pandemic-related drop in worldwide vehicle production, Autoneum’s revenue in local currencies fell by –18.7% in 2020, although the second half of the year saw a significant market recovery. Group revenue in Swiss francs fell by –24.2% year-on-year to CHF 1 740.6 million. For the full year 2020, the EBIT margin will be around 1.5% and the free cash flow slightly over CHF 100 million.
At the Annual General Meeting on March 25, 2021, the Board of Directors will propose Liane Hirner and Oliver Streuli for election to the Board of Directors of Autoneum Holding. Peter Spuhler will not stand for re-election.

At 74.5 million, the number of light vehicles produced globally in 2020 was down –16.2% compared to the previous year, where around 89 million vehicles were manufactured. Autoneum’s revenue in local currencies decreased by –18.7% in 2020, pretty much in line with the negative market dynamics. The somewhat stronger decline of revenue compared to the market results from a lower share of Asia in Autoneum's total revenue. Impacted by the appreciation of the Swiss franc against the most important currencies for Autoneum, the consolidated revenue dropped in 2020 by –24.2% to CHF 1 740.6 million. The heterogeneous development of the first and second half of the year was characteristic for the pandemic-driven automotive year 2020. Worldwide lockdowns and production stoppages at vehicle manufacturers led to a market slump in the first six months and a corresponding loss in revenue for Autoneum. Thanks to the subsequent market recovery and catch-up effects in the second half of the year, revenue improved considerably compared to the first half of the year.

Revenue development in Asia and SAMEA region significantly better than market
While revenues in local currencies of the highest-volume Business Groups Europe and North America decreased by –25.6% and –19.3% respectively, reflecting the regional, pandemic-driven market development (Europe: –22.9%; North America: –20.1%), Business Group Asia almost held its prior-year level with an organic decline of only –2.1% in 2020 thanks to the strong upturn in automobile production in China in the second half of the year and despite the fact that the number of vehicles produced in Asia fell by –11.4%.*

Personnel changes to the Board of Directors
At the Annual General Meeting on March 25, 2021, the Board of Directors of Autoneum Holding will propose Liane Hirner and Oliver Streuli for election as new members of the Board of Directors.
Liane Hirner has been CFO and member of the Management Board of Vienna Insurance Group, based in Vienna, Austria, since 2018.*

Oliver Streuli, a Swiss national, has been CEO of PCS Holding, based in Frauenfeld (Canton Thurgau), Switzerland, since 2019.*

Peter Spuhler has been a member of the Board of Directors of Autoneum since 2011 and will not stand for re-election at the Annual General Meeting on March 25, 2021.*

 

*See attached document for further informationen

Source:

Autoneum Management AG

VDMA: Young talents honoured online (c) VDMA
The winners 2020 (from top left to bottom right): Dr. Frederik Cloppenburg, Philippa Böhnke, Juan Carlos Arañó Romero, Dr. Annett Schmieder, Maximilian Speiser, Harry Lucas jun.
03.12.2020

VDMA: Young talents honoured online

In early December, the chairman of the Walter Reiners Foundation of the VDMA Textile Machinery Association, Peter D. Dornier presented awards to six successful young engineers. Due to the Covid-19 pandemic, the award ceremony took place as a web conference for the first time.

Philippa Böhnke, ITM Dresden, and Juan Carlos Arañó Romero, ITA Aachen, were honoured with creativity awards for the cleverest bachelor or project work. The prizes are endowed with 3,000 euros each. Ms. Böhnke’s project dealt with composite implants for the repair and regeneration of bone defects. In his bachelor thesis, Mr. Arañó Romero has developed a spinning machine able to produce yarn with material from the moon. By this, the transport effort in space travel can be minimised, because insulating material for example necessary for a moon base can be produced on the moon directly.

In early December, the chairman of the Walter Reiners Foundation of the VDMA Textile Machinery Association, Peter D. Dornier presented awards to six successful young engineers. Due to the Covid-19 pandemic, the award ceremony took place as a web conference for the first time.

Philippa Böhnke, ITM Dresden, and Juan Carlos Arañó Romero, ITA Aachen, were honoured with creativity awards for the cleverest bachelor or project work. The prizes are endowed with 3,000 euros each. Ms. Böhnke’s project dealt with composite implants for the repair and regeneration of bone defects. In his bachelor thesis, Mr. Arañó Romero has developed a spinning machine able to produce yarn with material from the moon. By this, the transport effort in space travel can be minimised, because insulating material for example necessary for a moon base can be produced on the moon directly.

Harry Lucas, TU Chemnitz, and Maximilian Speiser, Reutlingen University, were awarded two promotion prizes in the category master thesis with prize money of 3,500 euros each. The master thesis of Mr. Lucas deals with the development of a new knitting head for jacquard knitted fabrics, enabling a large variety of colours e.g. in the production of fan scarfs. Mr. Speiser showed in his master thesis a solution for increasing energy efficiency in the nonwovens process.

This year, two promotion prizes of the German Textile Machinery Industry in the dissertation category were awarded to Dr. Frederik Cloppenburg, ITA Aachen, and Dr. Annett Schmieder, TU Chemnitz. In his dissertation Mr. Cloppenburg developed a model for the optimisation of roller cards in the nonwovens process. Ms. Schmieder introduced in her dissertation a damage analysis system for fibre ropes. The system detects when a rope must be replaced e.g. in transport applications.

The award ceremony 2021 shall take place with physical presence again. It is scheduled for early May at the fair Techtextil in Frankfurt.

Source:

VDMA

Frankfurt Fashion Week: hosting the future of fashion © Lottermann and Fuentes
Anita Tillmann and Detlef Braun
02.12.2020

Frankfurt Fashion Week: hosting the future of fashion

  • Looking to the future – Frankfurt Fashion Week is positioning itself with a consistently sustainable agenda and propelling the transformation of a modern, resource-efficient fashion industry.

The Conscious Fashion Campaign (CFC), working in collaboration with the United Nations Office for Partnerships (UNOP), will be the presenting partner and the Sustainable Development Goals (SDGs) will be a prerequisite for all exhibitors by 2023. And the Frankfurt Fashion SDG Summit by CFC is set to become the leading international conference for sustainability in the fashion world. The future of fashion has begun – and its key players will be coming together in Frankfurt am Main from 5-9 July 2021.
 

  • Looking to the future – Frankfurt Fashion Week is positioning itself with a consistently sustainable agenda and propelling the transformation of a modern, resource-efficient fashion industry.

The Conscious Fashion Campaign (CFC), working in collaboration with the United Nations Office for Partnerships (UNOP), will be the presenting partner and the Sustainable Development Goals (SDGs) will be a prerequisite for all exhibitors by 2023. And the Frankfurt Fashion SDG Summit by CFC is set to become the leading international conference for sustainability in the fashion world. The future of fashion has begun – and its key players will be coming together in Frankfurt am Main from 5-9 July 2021.
 
Frankfurt am Main, 2 December 2020. Joining forces to improve the fashion industry: Frankfurt Fashion Week is positioning itself as the host of the future of fashion and actively driving forward the transformation towards a future-oriented, more sustainable fashion and textile industry. All decision-makers looking to instigate this change will be coming together in Frankfurt am Main from 5-9 July 2021. The initiators of Frankfurt Fashion Week – Messe Frankfurt and the Premium Group – have achieved a real coup: Conscious Fashion Campaign, working in collaboration with the United Nations Office for Partnerships, will be the presenting partner. Messe Frankfurt will build on its collaboration with the United Nations Office for Partnerships and establish Frankfurt Fashion week as the platform on which to advance the Sustainable Development Goals and help guide the fashion industry into the 'Decade of Action'.
 
“Frankfurt will play host to the whole world. We are seeing a very positive response indeed,” confirmed Peter Feldmann, Senior Mayor of the City of Frankfurt am Main, at today’s digital press conference, before going on to say: “The fact that the initiators are able to rethink the concept of a Fashion Week in such a way is extremely impressive and proves that the fashion industry is correctly interpreting the signs of the present and future. The time has come for value creation and values to be reconciled. Consistent alignment with the Sustainable Development Goals is an important step in this direction.”
 
“Frankfurt Fashion Week aims to play a crucial role in finding solutions for macrosocial challenges and supporting the goals of international politics such as the European Green Deal. The fashion and textile industries are also expected to be climate-neutral by 2050. If we want to achieve this, we all need to pull together. Frankfurt Fashion Week is inviting all initiators and supporters of sustainable concepts and congresses or shows dedicated to sustainability to meet in Frankfurt, partake in discussions and make tangible decisions for the greater good. We will connect the most relevant players and pave the way for a future-proof fashion and textile industry,” says Detlef Braun, CEO of Messe Frankfurt.
 
“Given its global reach, the fashion industry is uniquely positioned to collaborate and engage on the Sustainable Development Goals, in particular on climate action and responsible production and consumption,” said Annemarie Hou, Acting Executive Director of the United Nations Office for Partnerships. “Frankfurt Fashion Week and the Summit will serve as an important platform for education and engagement of the fashion and textile industry in the Decade of Action,” emphasised Ms Hou.
 
The aim of Frankfurt Fashion Week is for all exhibitors, participants and partners to align with the Sustainable Development Goals by 2023. The SDGs will also be incorporated into all formats of Frankfurt Fashion Week. This will help to make the UN’s sustainability goals visible and tangible for the Fashion Week audience, therefore bringing its claim, goals and specific proposals for implementation to an international opinion-forming fashion and lifestyle community. During a one-day Frankfurt Fashion SDG Summit presented by Conscious Fashion Campaign, topics like gender equality, clean water, climate protection, social justice and their significance for a forward-looking fashion industry will be examined in greater depth. Another point on the sustainability agenda: Frankfurt Fashion Week is launching a Sustainability Award for outstanding, innovative, sustainable design, alongside other categories with a global appeal for the fashion and textile industry.
 
"We are committed to setting the wheels of transformation in motion. Not only does the overall mindset have to fundamentally change; the entire industry also needs to have the courage to be transparent and honest. It’s important to see values and value creation as opportunities rather than contentious. We are doing what we do best: connecting the relevant players at all levels. With its ecosystem, Frankfurt Fashion Week will become the enabler. We are creating a platform that will orchestrate industry-wide change. With this as our inspiration, we are also developing our tradeshow formats from a ‘marketplace of products’ to a ‘marketplace of purpose and ideas’,” explains Anita Tillmann, Managing Partner of the Premium Group.
 
A new start in Frankfurt: In summer 2021 the entire fashion industry will be coming to the metropolis on the Main river to inform themselves, be inspired, discuss, negotiate and celebrate. “There’s a huge need to finally meet in person again, to exchange ideas and be inspired. At the same time, digital tools and formats have become an integral part of the fashion industry,” says Markus Frank, Head of the City of Frankfurt’s Department of Economic Affairs and therefore also responsible for its creative industry. “To implement such a future-oriented, all-encompassing overall concept, Frankfurt’s business and creative scenes offer an almost unique concentration of different expertise with its internationally networked agencies, universities and museums. The city’s multifaceted, high-end club, bar and restaurant scene, diverse hotel industry and internationally renowned retail landscape will become the stage for this. This network will be a key factor in the successful implementation of Frankfurt Fashion Week and the way in which it will expand into the public space as a cultural and social happening.”
 
A number of major publishing houses are also showing their commitment to the new Fashion Week in Frankfurt with conferences, events and awards: Textilwirtschaft, the leading professional fashion journal by the Deutscher Fachverlag publishing house, is moving its traditional meeting of the industry’s top decision-makers – the TW Forum, the presentation of the renowned Forum Award, as well as its subsequent conference – from Heidelberg to Frankfurt’s Palmengarten botanical gardens, and will therefore be kicking off Frankfurt Fashion Week on Sunday evening and Monday morning. The Frankfurter Allgemeine Zeitung will be hosting its traditional fashion party for the first time in Frankfurt and publishing a special edition of its FAZ Magazin on Frankfurt Fashion Week. And the ZEIT publishing group is holding its ‘UNLOCK Style by ZEITmagazin’ conference, which was established in 2014, and the ZEITmagazin Fashion Week party in Frankfurt for the first time and will dedicate the whole new issue of ZEITmagazin Frankfurt to Frankfurt Fashion Week. Condé Nast will also be involved in next summer’s Frankfurt Fashion Week with an exclusive event by GQ. And the Burda publishing house will also be represented with various event formats from its lifestyle and fashion brands.There will also be talks with SHINE  Conventions, the organiser of GLOW, about what a mutual collaboration could look like.
 
Frankfurt Fashion Week is also delighted to have the Fashion Council Germany (FCG) on board.  The FCG is theinstitution when it comes to German fashion design. It promotes designers, is committed to gaining more political relevance and strengthens the international visibility and awareness of German fashion. At Frankfurt Fashion Week, the FCG will contribute selected formats, such as its already established Fireside Chat, and a future-oriented accelerator format to support German designers.
 
“What really impresses me about Fashion Week is the whole networking aspect: the creative industries will meet the financial world and sustainability is the common denominator. The Green Finance Cluster is another project that we could link with Frankfurt Fashion Week in the future. This will provide new inspiration in the fashion industry, which will certainly extend way beyond its own horizon of Frankfurt and Hesse. After a very difficult year for the trade fair industry, the concept is an encouraging breath of fresh air,” sums up Tarek Al-Wazir, Hesse’s Minister of Economics, Energy, Transport and Regional Development and Deputy Minister-President of the state of Hessen.

Warden Schijve joins the AZL team (c) AZL
Dr. Michael Emonts, Warden Schijve, Philipp Fröhlig und Dr. Kai Fischer (von links nach rechts) im AZL Tech Center
02.11.2020

Warden Schijve joins the AZL team

Aachen - Warden Schijve, former Chief Scientist Composites at SABIC, recently joined the AZL engineering team in October. As Design Leader, he is further expanding the product and application development division of the service provider for business development and technology development in lightweight.

AZL Aachen GmbH supports companies along the entire value chain in implementing competitive lightweight technologies. "We develop component and production concepts for companies, including the analysis of costs and production-relevant KPIs. With our broad range of material and production technologies, we provide a comprehensive solution for the development and evaluation of products and identify the most suitable paths to implementation. Warden Schijve will use his many years of experience to support our partners in the efficient development, evaluation and implementation of component and production solutions through to market readiness," says Dr. Kai Fischer, Managing Partner of AZL Aachen GmbH.

Aachen - Warden Schijve, former Chief Scientist Composites at SABIC, recently joined the AZL engineering team in October. As Design Leader, he is further expanding the product and application development division of the service provider for business development and technology development in lightweight.

AZL Aachen GmbH supports companies along the entire value chain in implementing competitive lightweight technologies. "We develop component and production concepts for companies, including the analysis of costs and production-relevant KPIs. With our broad range of material and production technologies, we provide a comprehensive solution for the development and evaluation of products and identify the most suitable paths to implementation. Warden Schijve will use his many years of experience to support our partners in the efficient development, evaluation and implementation of component and production solutions through to market readiness," says Dr. Kai Fischer, Managing Partner of AZL Aachen GmbH.

From his 35 years in the composites industry with Fokker, DSM and SABIC, Warden Schijve brings a broad and deep expertise in structural design, plastics and composites, as well as processing technology.
Warden Schijve: “In my career I’ve always seen that it pays off to evaluate various different design concepts, which may use different materials or material combinations, to finally come to the most cost-competitive lightweight applications. Taking into account different manufacturing technologies right from the beginning can save a lot in later stages of component development. And this is what fascinates me about AZL and its eco-system: the available knowledge on a wide variation of process and production technologies, including cutting edge equipment, at both the AZL Tech Center, and the various institutes present in the total RWTH Aachen Campus.”

Dr. Michael Emonts, Managing Partner of AZL Aachen GmbH: "We are delighted that Warden Schijve, as a well-known face from the AZL community, will enrich us in developing lightweight applications, production systems and processes, identifying competitive technology optimizations through the analysis of markets and applications, and supporting our customers in the industrial implementation of the developed technologies."

Warden Schijve will also lead the project for a concept study for future battery casings based on composite-based multi-material systems. The AZL started the project in October together with 30 participating companies from the entire value chain to get an overview of existing component solutions, evaluate the advantages of a multi-material approach and develop a multi-material component design including a production concept for battery casings.

Bemberg™: Nilufer Bracco launches niLuu collection (c) Bemberg™
Women’s Sand kimono, matching sleep mask and pillowcase made of Bemberg™
27.10.2020

Bemberg™: Nilufer Bracco launches niLuu collection

  • The stunning niLuu collection by former professional volleyball player Nilufer Bracco features smart Bemberg™ fabrics by Ipeker
  • Wonderful kimonos for women and men, sleep and face masks are the key pieces of the PETA certified and cruelty-free collection, 100% Bemberg™ and vegan

Former professional volleyball player Nilufer Bracco recently launched niLuu, a PETA approved cruelty-free loungewear brand using 100% Bemberg™ by Asahi Kasei that combines the iconic elegance of traditional silk with a socially and environmentally ethical production process.

  • The stunning niLuu collection by former professional volleyball player Nilufer Bracco features smart Bemberg™ fabrics by Ipeker
  • Wonderful kimonos for women and men, sleep and face masks are the key pieces of the PETA certified and cruelty-free collection, 100% Bemberg™ and vegan

Former professional volleyball player Nilufer Bracco recently launched niLuu, a PETA approved cruelty-free loungewear brand using 100% Bemberg™ by Asahi Kasei that combines the iconic elegance of traditional silk with a socially and environmentally ethical production process.

Bemberg™ is a fiber made from the smart-tech transformation of cotton linters bio-utility materials that are converted through a traceable and transparent closed loop process; the Bemberg™ Ipeker Textile  fabric’s uniqueness comes from the exceptional quality characteristics achieved in design. The end result is a luxurious fabric so soft and smooth that it is almost like a second skin, breathes like cotton, drapes beautifully like silk, and reflects the cultural tradition of luxury textiles from founder Nilufer Bracco’s native country, Turkey. The first collection released by Miami based niLuu features premium quality kimono robes, sleep masks, face masks, and pillowcases that are available in a variety of deep and vibrant colors, and with a soft-brushed finish typical of premium sand-washed silk.

Designed to not only feel and look amazing but the entire niLuu collection is sustainable, biodegradable and 100% vegan.  Ipeker Textile, one of the major Bemberg™ fabric producers in Europe, proudly holds the title as the first vegan fabric producer in the world, receiving Vegan V-Label certificate on around 150 different products that adhere to the guidelines of the European Vegetarian Label, most of them developed with Bemberg™ yarn.

niLuu’s innovative Bemberg™ collection is hypoallergenic, antistatic, easy to care for, and it is also known to have several benefits for the skin. The breathability of the fabric helps to maintain body temperature; excellent moisture control means the fabric doesn’t dry out the skin or hair in the ways that cotton would and minimal friction against the skin means it is also known to have anti-aging benefits.  Speaking of niLuu’s high-quality Bemberg™ fabric, Founder, Nilufer Bracco adds, “Our innovative Bemberg™ vegan silk delivers the best of both worlds. Not only does our luxury fabric feel amazing when you use it, but you can also feel good knowing that it caused minimum harm to the planet when it was produced and that it will leave only the slightest trace when it reaches the end of its lifecycle.”

The luxury textiles brand has also shown its commitment to responsible practices, by partnering with 1% for the Planet pledging to donate 1% of their annual revenue to environmental organizations that work hard to protect our planet.

Oerlikon (c) Oerlikon
f.l.t.r Jochen Adler, Ralf Morgenroth, Markus Reichwein, Matthias Schmitz
15.10.2020

Oerlikon Experts share their know-how online

In order to ensure the transfer of know-how and technology in times of the pandemic, the Manmade Fibers segment of the Swiss Oerlikon Group will start its new webinar series in November. Four interesting technology lectures are planned until the end of 2020 which will be held in English. Current trends in the production of manmade fibers as well as Oerlikons technology solutions will be presented and discussed with the participants. A continuation of the webinar series is already planned for 2021.

In order to ensure the transfer of know-how and technology in times of the pandemic, the Manmade Fibers segment of the Swiss Oerlikon Group will start its new webinar series in November. Four interesting technology lectures are planned until the end of 2020 which will be held in English. Current trends in the production of manmade fibers as well as Oerlikons technology solutions will be presented and discussed with the participants. A continuation of the webinar series is already planned for 2021.

  • Factory know-how from a single source – A boost for your efficiency
    4. November 2020: 11:00-11:45h CET
    Speaker: Jochen Adler, Oerlikon Manmade Fibers CTO*
     
  • VarioFil – Your compact spinning solution
    11. November 2020: 11:00-11:45h CET
    Speaker: Ralf Morgenroth, Head of Engineering Textile Machinery BB Engineering (BBE)*
     
  • Green Technologies – Join us on the road to a sustainable fiber industry
    2. December 2020: 11:00-11:45h CET
    Speaker: Markus Reichwein, Head of Product Management Oerlikon Manmade Fibers*
     
  • VacuFil – Your future upcycling plant, from waste to value
    9. December 2020: 11:00-11:45h CET
    Speaker: Matthias Schmitz, Head of Engineering Recycling Technology, BB Engineering (BBE)*

 

*Please read the attached document for more information

Source:

Oerlikon Textile GmbH & Co. KG

Amazing Connections: SFASHION NET & C.L.A.S.S. © GB Network Marketing & Communication
Marina Savarese, SFASHION NET founder
31.08.2020

Amazing Connections: SFASHION NET & C.L.A.S.S.

  • A new partnership is born in the name of responsible innovation, relationships and a new twist in the fashion system

C.L.A.S.S., the international hub for responsible innovation founded by Giusy Bettoni, and SFASHION NET, the portal dedicated to micro critical fashion companies created by Guya Manzoni and Marina Savarese, join forces to give active support to micro enterprises and bring a wave of fresh air in the fashion system.

When you speak the same language and are moved by the same values, it is easy to meet on a common path. You can decide to walk alone, or to continue together in the same direction. This is what has happened since the meeting of C.L.A.S.S. and SFASHION NET, two realities, the first consolidated over time and the second recently born, which speak of responsible innovation, beauty, design, tradition, ethics and smart communication.

And who have decided to combine skills and ideas in the name of a revolutionary vision of fashion.

  • A new partnership is born in the name of responsible innovation, relationships and a new twist in the fashion system

C.L.A.S.S., the international hub for responsible innovation founded by Giusy Bettoni, and SFASHION NET, the portal dedicated to micro critical fashion companies created by Guya Manzoni and Marina Savarese, join forces to give active support to micro enterprises and bring a wave of fresh air in the fashion system.

When you speak the same language and are moved by the same values, it is easy to meet on a common path. You can decide to walk alone, or to continue together in the same direction. This is what has happened since the meeting of C.L.A.S.S. and SFASHION NET, two realities, the first consolidated over time and the second recently born, which speak of responsible innovation, beauty, design, tradition, ethics and smart communication.

And who have decided to combine skills and ideas in the name of a revolutionary vision of fashion.

Micro companies and independent designers, the daily bread of SFASHION NET, will become the final addressees of a series of specialized services and courses developed by C.L.A.S.S. and will benefit from special conditions for finding materials in small quantities available on the Smart Source and ad hoc consultancy. All this to support the growth of these brands that have always moved on the wave of sustainability and ethical production, but often encountering many problems.

Online activities will alternate with offline meetings, because relationship is what makes the difference, even in the world of fashion.

“The spirit and values of the new generation of designers are what makes us optimistic about tomorrow’s fashion system. For this reason, together with SFASHION NET “every year” we will choose 1 or 2 creatives that are more in line with our common values and we will promote them at 360°, on all our channels and with a targeted communication activity starting from the collections that will be presented in February”.