From the Sector

SmartERZ wird bis Ende 2025 weiter durch das Bundesministerium für Bildung und Forschung (BMBF) gefördert. Mit einer Fördersumme von 6 Mio. EUR startet das Bündnis mit seinen Partnern, den laufenden Vorhaben und den neu eingereichten Projekten in die zweite Phase der Umsetzung.

Die Vorbereitungen für die zweite Förderphase des WIR!-Bündnisses „SmartERZ: Smart Composites Erzgebirge“ starteten im Juli 2021 mit dem Aufruf an alle 197 Bündnispartner (Stand: 01/2022) zur Einreichung von Onepagern. 22 dieser einseitigen Projektskizzen gingen insgesamt bis Ende August 2021 beim Verbundkoordinator Wirtschaftsförderung Erzgebirge GmbH (WFE) ein. Abgebildet wurden darin innovative Ideen und Projekte in den Bereichen Technologieentwicklung (z. B. Oberflächenfunktionalisierung), der Entwicklung von Applikationen (z. B. in den Bereichen Automotive und Bauwesen) sowie Innovationen bei der Organisations-, Fachkräfte- und Regionalentwicklung. Nach der Begutachtung durch den SmartERZ-Beirat wurden 13 innovative Projektideen für die Abgabe von vollständigen Projektskizzen ausgewählt. Diese ergänzen die Strategie des Bündnisses SmartERZ. Mit zahlreichen Partnern aus Wirtschaft, Wissenschaft und Gesellschaft soll das Erzgebirge durch Innovationen im Maschinenbau, der Elektrotechnik, Kunststoffverarbeitung, Oberflächentechnik und Textiltechnik zu einem zukunftsfähigen Wirtschaftsstandort entwickelt werden. Ziel ist die Transformation der Region Erzgebirge zu einem führenden Hightech-Standort für neuartige, funktionalisierte Verbundwerkstoffe, sogenannte Smart Composites. Diese Materialien haben ein großes Innovations- und Wachstumspotential. Sie gelten als Schlüsseltechnologie und ermöglichen langfristig eine hohe regionale Wertschöpfung.

Im Ergebnis der Forschungs- und Entwicklungsprojekte entstehen funktionalisierte Textilien, die mit Sensoren, Aktoren oder Leiterbahnen ausgestattet werden, um beispielsweise Körperfunktionen oder Transportschäden messen und melden zu können, oder funktionalisierte Matrizen, z. B. Formgedächtnispolymere, deren Form nach vorheriger „Programmierung“ thermoreversibel geändert werden kann, oder funktionalisierte Oberflächen mit Selbstheilungseigenschaften bzw. optischen und haptischen Effekten. Darauf aufbauend können funktionsintegrierte Leichtbauelemente (auch: Adaptronikleichtbau), wie Kunststoffräder mit erweiterten Funktionen, z. B. elektrische Radnabenmotoren, entwickelt werden.

Auf Basis des im Oktober 2021 beim Projektträger Jülich (PtJ) eingereichten Konzepts, der Präsentation am 25. Januar 2022 beim BMBF und der anschließenden Diskussion wurden der bisherige Fortschritt, die weitere Planung für die Umsetzungsphase und die Aussichten für eine Verstetigung des Bündnisses von der Expertenjury positiv mit folgendem Statement bewertet. „Das Bündnis ist wirtschaftsgetrieben und stark regional verwurzelt, was eine hohe Anwendungsorientierung und spätere Verwertbarkeit der Ergebnisse sowie konkrete Effekte in der Region erwarten lässt.“ In den kommenden Wochen wird sich der SmartERZ-Beirat erneut beraten, um die endgültige Entscheidung zu den eingereichten Projektskizzen zu treffen. Der Start in die zweite Förderphase, die konkrete Planung mit Timeline und das gemeinsame Ziel bis 2025hat die WFE bereits fest im Blick. Um auch die Bündnispartner und interessierte Unternehmen aus Wirtschaft und Wissenschaft mit einzubeziehen, gibt das SmartERZ-Managementteam am 7. April 2022 in der Online-Veranstaltung SmartCONNECT ein Update zu Neuerungen, Zeitplan und geplanten Projekten.

Als einwohnerstärkster Landkreis Ostdeutschlands hat das Erzgebirge eine solide Entwicklungsbasis. Mit der zweithöchsten Industrie- und Handwerkerdichte in Sachsen ist die Region in zahlreichen B2B-Zulieferketten etabliert und kann eine ausgeprägte Branchenvielfalt vorweisen. Auch die Arbeitslosenquote ist im Erzgebirge eine der niedrigsten in ganz Deutschland mit einem Höchststand an sozialversicherungspflichtigen Arbeitnehmern. Dem gegenüber stehen kleinteilige Firmenstrukturen mit geringer Produktivität, die Abhängigkeit vom Metall-Automotive-Sektor mit geringen Margen in Transformation und das niedrigste Lohnniveau auf Basis des Medianentgeltes. Hier setzt SmartERZ an: Das Netzwerk verbindet kleine und mittelständische Unternehmen und bezieht auch aktuelle Forschungsprojekte ein, so dass sich Kooperationen finden und die Innovationskraft der Region durch Wissenstransfer und Zusammenarbeit voll ausgeschöpft werden kann. Unter den 197 Bündnispartnern befinden sich 152 Wirtschaftsunternehmen, 30 wissenschaftliche und 15 gesellschaftliche Einrichtungen, die gemeinsam aktiv werden können. Der Fokus auf Smarte Composite verhilft dem Erzgebirge und der geballten Technologiekompetenz der ansässigen Unternehmen zu einer überregionalen Sichtbarkeit, was wiederum zu Aufträgen mit größerem Volumen beitragen soll. Basierend auf dieser erwünschten Entwicklung können Fachkräfte gehalten und neue Stellen zu besseren Konditionen geschaffen werden.

Die digitale Innovationsplattform innovERZ.hub wurde im Hinblick auf die projektübergreifende Innovationsentwicklung im Erzgebirge, den vorbereitenden Austausch und weitere Kooperationsvorhaben im November 2020 von der WFE ins Leben gerufen. Wirtschaftsunternehmen, öffentliche Institutionen und wissenschaftliche Einrichtungen können hier online Kooperations-, Umsetzungs- und Fertigungspartner suchen und finden.

• INDA, the Association of the Nonwoven Fabrics Industry, today announced six new board members and its 2022 slate of officers to guide the success of the nonwovens industry and its members.

Elected by the INDA membership to three-year terms that began on March 1, the new board members bring a high level of diverse expertise and insight to the management of the association as it moves forward with its vibrant growth.

“I am delighted to welcome such a strong group of new board members who bring deep industry knowledge and insights to provide strategic stewardship for our association,” said Dave Rousse, INDA President. “We look forward to working with them to advance INDA’s new value proposition to enhance our industry’s leadership position and deliver greater value to our members.”

The new board members are from global leaders Lenzing Group, Bast Fibre Technologies, Reifenhauser Reicofil, Rockline Industries, Hollingsworth & Vose Company and Principle Business Enterprises.  

INDA also announced Bryan Haynes, Ph.D., R&E Technical Director Kimberly-Clark, has been named Chairman of the Board. Barbara Lawless, Vice President Sales and Marketing, Medical Products, Precision Fabrics Group, Inc. has been elected Vice Chair of Finance, and Richard Altice, President and CEO of NatureWorks, has been appointed to INDA’s Executive Committee.

The new board members are:

• Jürgen Eizinger, Senior Commercial Director, Nonwovens Business EU/AM/MEA, Lenzing Group

Eizinger has nearly 20 years of fiber industry experience. He has been with the Lenzing Group since 2001 and most recently was Vice President of the Global Nonwoven Business. He has worked at multiple locations around the world and held various commercial, engineering and technical customer services roles.

• Jim Posa, President and General Manager, Bast Fibre Technologies, Inc.

Posa has 30-plus years of nonwovens experience and has successfully led businesses from startups to some of the largest companies in the nonwovens market. He has developed and implemented strategic business, development, operational and acquisition growth plans. His teams have worked with businesses focused on most of the major end use markets such as hygiene, wipes, filtration, medical and industrial. As a senior executive, Posa has led global businesses at Fiberweb, BP/Amoco, CEO of a Nisseki/Amoco joint venture (ANCI), Lydall, and Nitto America. A long-time INDA supporter, he has previously served on committees and as a Board member.

• Markus Mueller – Sales Director and Board Member, Reifenhauser Reicofil

Mueller brings to the INDA Board 35 years of experience with Reifenhauser in the nonwovens and film industries. His experience has included roles as PLC Engineer, Commissioning Engineer, Project Manager and Sales Manager. Mueller has extensive knowledge of the global hygiene and medical nonwovens markets. He holds a degree in Electrical Engineering from the Technical University of Cologne.

• Matt Koele, Director of Global Materials Development, Rockline Industries

Koele is based at Rockline’s headquarters in Sheboygan, WI.  Before joining Rockline in 2012, he has held several business and Research and Development (R&D) leadership positions at SC Johnson and Kimberly-Clark Corporation. An inventor with over 10 patents, Koele is a magna cum laude graduate of Michigan Technological University in Chemical Engineering.

• Mike Clark, President, Filtration Solutions, Hollingsworth & Vose Company

Clark joined H&V in 2003 and has held numerous leadership positions in the U.S. and Germany. He previously served as the President of the High Efficiency and Specialty Filtration Division from 2009 to 2020.  Before joining H&V, Clark was a strategy consultant for eight years working with Fortune 100 manufacturing companies. He holds a bachelor’s in Mechanical Engineering from Rensselaer Polytechnic Institute.

• Andrew Stocking, Ph.D., President and CEO, Principle Business Enterprises, Inc. (PBE)

Stocking joined PBE in 2017 after a career in engineering, technology, nonprofits and government. He was named President and COO in 2018, then President and CEO in 2020, becoming the third-generation leader of the family-owned organization. He previously held roles in the private sector and within federal government offices, including the Department of Energy and Congressional Budget Office. He earned a BS in Chemical Engineering and an MS in Civil Engineering from Stanford University, and a Ph.D. in Resource Economics from the University of Maryland.

The 21-member board is comprised of elected Board Officers. One-third of the entire Board is elected each year for a three-year term by a majority vote of INDA’s general membership. INDA’s Executive Committee, empowered to act on behalf of the Board between meetings, consists of the Board Officers plus four appointees.

• Company underlines commitment to helping customers meet 2030 sustainability goals

Avgol® Industries 1953 Ltd, a global leader in the manufacture of high-performance nonwoven fabric solutions, will use this month’s IDEA22 to underline its commitment to helping customers meet their long-term sustainability objectives.

The company will highlight the latest work in biodegradation technology for polyolefin nonwoven fabrics at the Miami Beach event, showcasing its own range of component nonwoven fabric solutions. Together with its sister companies from Indorama Ventures Limited (‘IVL’) – who will be presenting biodegradation capable polyolefin and polyester fibers – Avgol will discuss with visitors how specific products can help businesses achieve their 2030 sustainability goals.

Hypetex®, a leader in colouring carbon fibre materials, is delighted to announce that its Hypetex® Kromaskin™ field hockey stick for adidas has been selected as a finalist for the 2022 JEC Innovation Awards.

Hypetex® was commissioned by adidas to develop a market leading hockey stick differentiated from existing equipment not just by its unique pigmented carbon fibre finish, but also by its game changing hitting power and consistency. The patented range of Kromaskin™ sticks, created with support from project partners Textreme® and Marque Makers, was found to outperform competitors in a benchmark study against eight other premium hockey sticks carried out by Loughborough’s Sports Technology Institute (STI).

Hypetex® lead the design, engineering, materials, and production process development for the adidas field hockey stick project. By incorporating the stick’s finish colour within the outermost carbon fibre layer, the stick mould could be adjusted outwards, placing the highly structural spread tow materials right at the outer extremities of the mould cavity, increasing mechanical performance and maximising the structural benefits of the composite materials used.

Whilst the Kromaskin™ surface provides a stunning depth of colour with minimal finishing required after demoulding, the Hypetex® technology, including an epoxy based expanding microsphere system used in the core, delivers significant performance gains on the hockey pitch. In tests at the STI, adidas Kromaskin™ sticks had up to 16% higher coefficient of restitution (COR), meaning they will return more energy and the ball will travel faster. In addition, through the production led design and materials used, the variation in COR was 70% less than the other sticks on test, a significant reduction in the production inconsistencies common with the manufacturing of performance sporting goods.

• Sustainability at Milano Unica:  Ecodesign for an environmentally friendly fashion industry.

A ski suit made of yarn obtained from recycled materials and fully recyclable at end-of-life, without giving up on style, design and technical performance: this is RadiciGroup’s business card at the 34th Milano Unica, the international high-end textiles trade show taking place at the Milan Rho Fairground on 1-2 February.

In the Innovation Area of TexCubTec, Sistema Moda Italia’s technical and functional textile section, visitors can see and touch the new uniform of the RadiciGroup Ski Club designed by RadiciGroup in collaboration with the DKB sportswear brand.

“The ski suit, consisting of jacket and trousers, is fashioned with fabric made of RENYCLE®, a RadiciGroup yarn obtained from mechanically recycled nylon,” pointed out Marco De Silvestri, sales & marketing manager – Apparel and Technical of RadiciGroup Advanced Textile Solutions business area. “In addition, the suit’s padding and numerous accessories, such as zippers, Velcro, buttons and thread, are also made of polyamide. It was an ambitious project and we reached a definitive goal: circularity in sportswear without compromising on performance. A goal achieved through continuous close collaboration with other companies in the chain to develop chemically compatible materials that guarantee the high technical performance required by this kind of application.”

At Milano Unica, besides RENYCLE®, RadiciGroup is showcasing garments made of   REPETABLE®, a polyester yarn obtained from post-consumer recycled plastic bottles, and articles made of BIOFEEL®, a brand identifying both nylon and polyester yarn made from renewable source materials.

Promising conditions in the technical textiles and nonwovens market are expected to provide ample opportunities for suppliers at this year’s Cinte Techtextil China. The fair, which last year saw 366 exhibitors and 14,868 visits, will take place from 6 – 8 September 2022 at the Shanghai New International Expo Centre. Flexible exhibiting options will once again be available for overseas companies.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd, explained the positive conditions that exhibitors should expect at the fair thusly: “The pandemic has led to a surge in Chinese exports of both technical textiles and nonwovens, the latter in particular. The country remains the largest supplier of nonwovens, comprising one-third of the global total, yet still requires the advanced offerings of overseas machinery suppliers, as well as supplies of raw materials, to support its export production.”

Ms Wen continued: “Domestically, China is seeing increasing consumption of functional apparel, sportswear and personal protection items. Heightened health and sanitary regulations and new hygiene habits will also continue to drive demand, especially for nonwovens, well into the future. There has also been a post-pandemic boost in demand for filter, greenhouse covering and high-density fabrics amongst others. All of this adds up to a wealth of opportunities for overseas companies to take advantage of, as was experienced in the 2021 edition of the fair.”

Exhibitor and visitor experiences in 2021
“Our organisation promotes US cotton and we hope to use this platform to meet more companies and brands in the nonwovens industry who are interested in US cotton, and to meet up with old friends to discuss the current situation and industry trends. We also found some new potential clients this time.” Mr Eric Ni, Senior Manager, China Supply Chain Marketing, Fabrics, Garments and Nonwovens, Cotton Council International, USA

“Cinte Techtextil China is a professional exhibition that brings together cutting-edge technologies and products, allowing us to quickly learn about innovative technology trends in the industry. I’ve been particularly impressed by the biodegradable products in the Innovation Showcase. In addition, I am sourcing mask-related products and mops, and I have found some companies that I’m interested in.” Ms Claire Zhang, Senior Scientist, Personal Health, Philips Research China, Philips (China) Investment Co Ltd, China

Asia's largest fashion fair, CHIC SPRING SHANGHAI, will postpone the event planned for March to April 14-16, 2022. The latest worldwide pandemic developments due to the new virus variant Omicron prompted the CHIC organizers to take this step.

With this relocation, the organizers are also taking into account the interests of international exhibitors and visitors. In addition to various international joint stands, Germany will also be represented with a GERMAN PAVILION. The trade fair team is working on innovations at the trade fair with the highest priorities and will now focus the entire marketing on the new date.

CHIC SPRING is the showcase for the latest trend developments in fashion and offers trade visitors a concentrated overview. CHIC SPRING as a fashion and lifestyle fair shows the areas of womenswear, menswear, kidswear, denim, shoes and bags, accessories, designers and streetwear in clear segments at the National Convention & Exhibition Center in Shanghai.

CHIC is organized by Beijing Fashion Expo Co. Ltd. and China World Exhibitions, supported by the China National Garment Association, the China World Trade Center and the Sub-Council of the Textile Industry (CCPIT).

Avgol, an Indorama Ventures company and manufacturer of high-performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s Hygienix™ event.

Nick Carter, Vice President, Nonwovens Marketing at Avgol, will be a guest speaker at the event, giving a presentation alongside Dr. DeeAnn Nelson, R&D and Innovation Manager with Avgol in North America, on ‘Biotransformation Technology in Polyolefin Fibers and Nonwoven Fabrics, Focus on Fugitive Used Articles’. “Today, the word “sustainability” does not have a unified meaning in the industries we serve,” said Nick. “Perform a regional analysis on any given customer or consumer, delve into a legislative body or advocacy group’s positioning and you will find each are likely to use the word ‘sustainable’ with varying interpretations, implementations, and implications.

The Avgol presentation, part of the Product & Process Innovation in AHPs series, will take place at 2pm on Tuesday, November 16.

From their base at the tabletop event, Nick and the Avgol team will be discussing the global challenge of eliminating incineration, chemical treatment, landfill, dumping and, in particular, fugitive material pollution from non-woven products.

“Following our recent success at Index 20, we will be sharing insight to our research and development strategy with Hygienix attendees, addressing the degradation performance of our products and the path forward for the industry in terms of the use of new bio-colorants, biosurfactants and new technologies. Of course, we will also be demonstrating our latest Forward Innovative Thinking (FITTM) range of hygiene materials too, including natureFITTM”, says Nick Carter.

natureFIT™ is the newest innovation in the Avgol™ technology platform, designed to imbue nonwoven fabrics with additional qualities and benefits that anticipate the shifting demands of the consumer-led retail space. The suite of fabric solutions is focused on replacing elements of spun melt fabric design, where possible, with natural alternatives. The advanced technology affords product designers a significant reduction in polymer consumption to reduce environmental impact while simultaneously enhancing softness and conformability.

Hygienix™ runs from 15 – 18 November 2021 at the Westin Kierland Resort in Scottsdale, Arizona, USA.

As of October 1, 2021, Dr. Annegret Vester has assumed responsibility for sustainability issues of the CHT Group. With the Doctor of Chemistry, the ideal person for the CSO position could be found in many respects.
 
Dr. Vester has many years of experience in the transformation of CHT into today's sustainability-focused chemical company in her positions as Head of Global CHT Marketing and as Head of Strategy and Business Development.

In recent years, she has been responsible for the company's excellent rating in the EcoVadis assessment with regard to corporate social responsibility activities. The realignment of the corporate strategy with the United Nations Sustainable Development Goals (UNSDG) has been one of her tasks, as has the annually published CHT Sustainability Report documenting the measures and successes.

With the appointment of Dr. Vester, the CHT Management Board once again underlines the essential importance of sustainability for the strategic orientation of the globally operating group of companies.

SABIC has announced that the newly formed Hygiene & Healthcare segment of its Petrochemicals business will showcase its extensive portfolio of SABIC PURECARES™ polypropylene (PP) and polyethylene (PE) polymers for high-purity nonwovens and hygiene films at the upcoming INDEX™ Expo in Geneva, Switzerland, from October 19 through 22, 2021. The company will also present enabling solutions developed with partners to address the issue of plastic waste and support the transformation of the industry towards a circular economy with closed-loop initiatives and certified circular polymers under its TRUCIRCLE™ portfolio and services.

During INDEX, SABIC will exhibit a wide range of PP polymers targeted at these needs. Highlights on display will include dedicated PP and PE grades for lightweight nonwoven fabrics using the latest spunbond and meltblown processes, and a new ultra-high melt flow PP product engineered for meltblown fibers in nonwoven fabrics. The nonwoven focus will be complemented by industry proven polyolefins for cast and blown film applications in hygiene webs and laminates, providing desirable back and top sheet properties such as water tightness, breathability and elasticity.

In addition, SABIC will also present ISCC Plus certified fiber and film polymers based on circular and renewable PP and PE polymer technology as part of the company’s TRUCIRCLE portfolio for advancing the transformation of the plastics industry from a linear to a truly circular economy. Examples of this comprehensive initiative include collaborations with various market leaders in the field. Together with Fibertex Personal Care, one of the world’s largest manufacturers of spunbond nonwovens for the hygiene industry, SABIC is creating a range of high-purity nonwovens for the hygiene market using ISCC PLUS certified circular PP polymer derived from post-consumer plastic waste. In another project, Fraunhofer Institute, SABIC and Procter & Gamble (P&G) joined forces to develop and demonstrate the feasibility of an advanced close-loop recycling process for used nonwoven facemasks.