From the Sector

Reset
35 results
(c) A. Monforts Textilmaschinen GmbH & Co. KG
05.01.2024

Monforts: New Stenter line installed at Curt Bauer

Monforts' new Montex 8500 stenter line was recently installed at Curt Bauer’s plant in Aue in Germany.

Curt Bauer has been in continuous operation for 150 years, beginning as a weaving mill in Aue in the Ore Mountains region of Saxony back in 1882. Today, with 120 employees, the company has an annual production of 2.2 million metres of fabric and specialises in three key fields – home textiles, special damask fabrics for West African garments and technical textiles.

A first Montex stenter was installed by Monforts at the Aue plant in 2003 and an older machine from a third party supplier was also still in operation prior to the latest upgrade.
“The replacement of our older existing stenter, which was installed in 1985, was long overdue,” explains Gert Bauer. “It had a maximum working width of 2.2 metres and we were looking to both increase productivity and reduce energy requirements.”

Monforts' new Montex 8500 stenter line was recently installed at Curt Bauer’s plant in Aue in Germany.

Curt Bauer has been in continuous operation for 150 years, beginning as a weaving mill in Aue in the Ore Mountains region of Saxony back in 1882. Today, with 120 employees, the company has an annual production of 2.2 million metres of fabric and specialises in three key fields – home textiles, special damask fabrics for West African garments and technical textiles.

A first Montex stenter was installed by Monforts at the Aue plant in 2003 and an older machine from a third party supplier was also still in operation prior to the latest upgrade.
“The replacement of our older existing stenter, which was installed in 1985, was long overdue,” explains Gert Bauer. “It had a maximum working width of 2.2 metres and we were looking to both increase productivity and reduce energy requirements.”

As a consequence, the company opted for a new Montex 8500 line with a working width of 3.2 metres equipped with the MonforClean heat recovery and exhaust air purification system. The Montex stenter remains unmatched in terms of its robustness and long service life and with MonforClean technology, the waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required, compared to full gas and thermal oil heating. Overall energy savings of up to 40% can now be achieved compared to conventional stenters.

The first challenge at the Aue plant was how to fit the significantly larger machine into the available space without restricting the area required for docking operations.

The special multi-level configuration that Monforts designers and Curt Bauer’s team devised in order to meet these requirements involved raising all of the line’s drying zones – with a combined length of over 28 metres – on scaffolding platforms, to enable the ground floor space below them to continue to be fully utilised.

The next challenge involved configuring the MonforClean system without having to make any costly changes to the roofing structure. This, Gert Bauer observes, demanded “millimetre precision”.

With the new line now fully operational, the savings it is providing have yet to be fully calculated.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

AZL Aachen GmbH: Kick-off meeting for "Trends and Design Factors for Hydrogen Pressure Vessels" project (c) AZL Aachen GmbH
21.12.2023

AZL Aachen GmbH: Kick-off meeting for "Trends and Design Factors for Hydrogen Pressure Vessels" project

The kick-off meeting for the "Trends and Design Factors for Hydrogen Pressure Vessels" project, recently held at AZL Aachen GmbH, was a successful event, bringing together more than 37 experts in the field of composite technologies. This event laid a solid foundation for the Joint Partner Project, which currently comprises a consortium of 20 renowned companies from across the composite pressure vessel value chain: Ascend Performance Materials, C evotec GmbH, Chongqing Polycomp International Corp. (CPIC), Conbility GmbH, Elkamet Kunststofftechnik GmbH, F.A. Kümpers GmbH & Co. KG, f loteks plastik sanayi ticaret a.s., Formosa Plastics Corporation, Heraeus Noblelight GmbH, Huntsman Advanced Materials, Kaneka Belgium NV, Laserline GmbH, Mitsui Chemicals Europe GmbH, Plastik Omnium, Rassini Europe GmbH, Robert Bosch GmbH, Swancor Holding Co. Ltd. Ltd., TECNALIA, Toyota Motor Europe NV/SA, Tünkers do Brasil Ltda.

The project follows AZL´s well proven approach of a Joint Partner Project, aiming to provide technology and market insights as well as benchmarking of different material and production setups in combination with connecting experts along the value chain.

The kick-off meeting for the "Trends and Design Factors for Hydrogen Pressure Vessels" project, recently held at AZL Aachen GmbH, was a successful event, bringing together more than 37 experts in the field of composite technologies. This event laid a solid foundation for the Joint Partner Project, which currently comprises a consortium of 20 renowned companies from across the composite pressure vessel value chain: Ascend Performance Materials, C evotec GmbH, Chongqing Polycomp International Corp. (CPIC), Conbility GmbH, Elkamet Kunststofftechnik GmbH, F.A. Kümpers GmbH & Co. KG, f loteks plastik sanayi ticaret a.s., Formosa Plastics Corporation, Heraeus Noblelight GmbH, Huntsman Advanced Materials, Kaneka Belgium NV, Laserline GmbH, Mitsui Chemicals Europe GmbH, Plastik Omnium, Rassini Europe GmbH, Robert Bosch GmbH, Swancor Holding Co. Ltd. Ltd., TECNALIA, Toyota Motor Europe NV/SA, Tünkers do Brasil Ltda.

The project follows AZL´s well proven approach of a Joint Partner Project, aiming to provide technology and market insights as well as benchmarking of different material and production setups in combination with connecting experts along the value chain.

The kick-off meeting not only served as a platform to foster new contacts and get informed about the expertise and interests of the consortium members in the field of hydrogen pressure vessels, but also laid the groundwork for steering the focus of the upc oming project's ambitious phases. As a basis for the interactive discussion session, AZL outlined the background, motivation and detailed work plan. The central issues of the dialogue were the primary objectives, the most pressing challenges, the contribut ion to competitiveness, and
the priorities that would best meet the expectations of the project partners.

Discussions covered regulatory issues, the evolving value chain and the supply and properties of key materials such as carbon and glass fibres and resins. The consortium defined investigations into different manufacturing technologies, assessing their matu rity and potential benefits. Design layouts, including liners, boss designs and winding patterns, were thoroughly considered, taking into account their implications for mobile and stationary storage. The group is also interested in cost effective testing m ethods and certification processes, as well as the prospects for recycling into continuous fibres and the use of sustainable materials. Insight was requested into future demand for hydrogen tanks, OEM needs and strategies, and technological developments to produce more economical tanks.

The meeting highlighted the importance of CAE designs for fibre patterns, software suitability and the application dependent use of thermoset and thermoplastic designs.

The first report meeting will also set the stage of the next project phase, which will be the creation of reference designs by AZL's engineering team. These designs will cover a range of pressure vessel configurations using a variety of materials and production concepts. The aim is to develop models that not only re flect current technological capabilities, but also provide deep insight into the cost analysis of different production technologies, their CO2 footprint, recycling aspects and scalability.

AZL's project remains open to additional participants. Companies interested in joining this initiative are invited to contact Philipp Fröhlig.

Lenzing relies on wind power in the fiber and pulp production (c) Lenzing AG
At the ground-breaking ceremony, from left to right: Josef Reiter (Mayor of Engelhartstetten) Thomas Östros (Vice-President of the European Investment Bank) Helga Krismer-Huber (Green Party Lower Austria LAbg) Stephan Pernkopf (Deputy Governor of Lower Austria) Leonore Gewessler (Minister for Climate Protection) Gregor Erasim (owner of WLK energy) Gerda Holzinger-Burgstaller (Chairwoman of the Management Board of Erste Bank Österreich) Bianca Flesch (Environmental Management Messer Austria GmbH) Mario Wohanka (WLK Chief Financial Officer) Christian Skilich (CTO Lenzing AG)
10.11.2023

Lenzing relies on wind power in the fiber and pulp production

The Lenzing Group has concluded a supply contract with the Austrian electricity producer WLK energy for the purchase of around 13 megawatts of wind power. Lenzing is thus not only underlining its commitment to climate protection and the energy transition, but is also making a long-term investment in a price-stable and diversified electricity supply. The contract has a term of 15 years and provides for supply from the new wind farm in Engelhartstetten from the first quarter of 2025.

The construction of the wind farm is a joint project involving several partners, including the operator and electricity supplier WLK energy, based in Untersiebenbrunn (Lower Austria). The total output of the wind farm with a total of eleven wind turbines will be around 45 megawatts. The share of around 13 megawatts, which will be produced exclusively for the needs of the Lenzing site (Upper Austria), corresponds to the average electricity requirements of around 10,000 households per year in Austria. The ground-breaking ceremony to mark the start of construction took place on November 09, 2023 with representatives from politics and business.

The Lenzing Group has concluded a supply contract with the Austrian electricity producer WLK energy for the purchase of around 13 megawatts of wind power. Lenzing is thus not only underlining its commitment to climate protection and the energy transition, but is also making a long-term investment in a price-stable and diversified electricity supply. The contract has a term of 15 years and provides for supply from the new wind farm in Engelhartstetten from the first quarter of 2025.

The construction of the wind farm is a joint project involving several partners, including the operator and electricity supplier WLK energy, based in Untersiebenbrunn (Lower Austria). The total output of the wind farm with a total of eleven wind turbines will be around 45 megawatts. The share of around 13 megawatts, which will be produced exclusively for the needs of the Lenzing site (Upper Austria), corresponds to the average electricity requirements of around 10,000 households per year in Austria. The ground-breaking ceremony to mark the start of construction took place on November 09, 2023 with representatives from politics and business.

In 2019, Lenzing was the first fiber manufacturer to set itself the goal of reducing its CO2 emissions by 50 percent by 2030 and becoming carbon-neutral by 2050. This CO2 reduction target was recognized by the Science Based Targets Initiative. In 2022, Lenzing opened Upper Austria's largest open-space photovoltaic plant together with Verbund and also signed an electricity supply contract for photovoltaic energy with the green electricity producer Enery and Energie Steiermark.

Source:

Lenzing AG

18.10.2023

SHIMA SEIKI at A+A 2023

SHIMA SEIKI MFG., LTD. of Wakayama, Japan will participate in the A+A 2023—Safety, Security and Health at Work International Trade Fair in Düsseldorf, Germany (24th-27th October 2023). On display will be the company's latest safety-related technology through its new SPG®-R pile glove knitting machine and the prototype SFG®-R next-generation glove knitting machine. Each of these machines drew attention at SHIMA SEIKI's booth at the International Textile Machinery (ITMA 2023) Exhibition in Milan.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan will participate in the A+A 2023—Safety, Security and Health at Work International Trade Fair in Düsseldorf, Germany (24th-27th October 2023). On display will be the company's latest safety-related technology through its new SPG®-R pile glove knitting machine and the prototype SFG®-R next-generation glove knitting machine. Each of these machines drew attention at SHIMA SEIKI's booth at the International Textile Machinery (ITMA 2023) Exhibition in Milan.

SHIMA SEIKI's original SPG®, developed in 1979 as the world’s first automatic glove knitting machine to produce seamless pile-knitted gloves, is now reborn as a next-generation model. Pile gloves feature special traits that include cushioning, shock-reduction and thermal insulation and cold protection, making them popular especially in the field of industrial safety. Now, SPG® is redesigned from the ground up and re-introduced as the SPG®-R. The new SPG®-R features a new moveable sinker system with selectable loop presser function. Combined with a new belt-driven carriage it allows SPG® to provide efficient and reliable production of fashionable, high-quality pile gloves. Shown in 7 gauge at A+A, SPG®-R surpasses the previous generation with pioneering technology, improved capability and reliable productivity.

SHIMA SEIKI's original product on which the company was founded was the fully automated seamless glove knitting machine. While the original model evolved to become the current SFG® series, SFG®-R exhibited at A+A is its spiritual successor. With a new sinker system, a belt-driven 2-cam carriage and auto yarn carriers SFG®-R is a completely new machine for knitting gloves that conform better to the shape of the hand for improved fit. Furthermore its greater design potential offers users the opportunity to break out of the work glove market and into the fashion market. SFG®-R is shown as a prototype next-generation model in 12 gauge at A+A.

Also demonstrated will be SHIMA SEIKI's APEXFiz® design software. The importance of design software is made even more significant by the new patterning capabilities of SPG®-R and SFG®-R. Both machines now feature increased design potential that allow each of their products—pile gloves and work gloves, respectively—to expand their market into fashion. APEXFiz® is available for developing these designs. Furthermore virtual sampling on APEXFiz® is especially effective in streamlining the production process. Ultra-realistic simulation capability allows the use of virtual samples for evaluating design variations without producing actual samples for each variation, thereby minimizing the time, cost and resources normally required with sample-making, supporting smart, speedy and sustainable production.

Source:

SHIMA SEIKI MFG., LTD.

Brembo SGL Carbon Ceramic Brakes expands production capacity (c) SGL CARBON SE
13.09.2023

Brembo SGL Carbon Ceramic Brakes expands production capacity

SGL Carbon and Brembo agreed to expand production capacities for the joint venture Brembo SGL Carbon Ceramic Brakes (BSCCB). Both companies have been working together with BSCCB on the conditions and implementation plans for this in the preceding months. BSCCB will invest around €150 million until 2027 to expand by more than 70% production capacities at the sites in Meitingen (Germany) and Stezzano (Italy).

The capacity enlargement includes the construction of two new production facilities at the SGL Carbon Meitingen site with a total area of around 8,500 m² and the installation of new production machinery. The groundbreaking in Meitingen will take place this fall.

At the Stezzano site, production areas will be extended by around 4.000 m² to existing buildings and investments will be made in new production machinery.

SGL Carbon and Brembo agreed to expand production capacities for the joint venture Brembo SGL Carbon Ceramic Brakes (BSCCB). Both companies have been working together with BSCCB on the conditions and implementation plans for this in the preceding months. BSCCB will invest around €150 million until 2027 to expand by more than 70% production capacities at the sites in Meitingen (Germany) and Stezzano (Italy).

The capacity enlargement includes the construction of two new production facilities at the SGL Carbon Meitingen site with a total area of around 8,500 m² and the installation of new production machinery. The groundbreaking in Meitingen will take place this fall.

At the Stezzano site, production areas will be extended by around 4.000 m² to existing buildings and investments will be made in new production machinery.

The extensive expansion of production capacities will enable Brembo SGL Carbon Ceramic Brakes (BSCCB) to meet the high market demand and to cover the increasing customer requests in the future. The need for carbon ceramic brake discs from BSCCB increased worldwide. This is mainly due to the high product quality and performance of carbon ceramic brake discs, which meet the specific requirements of automotive manufacturers, especially in the premium and luxury segments, where high braking performance is needed.

Source:

SGL CARBON SE

13.02.2023

CELLIANT cleared to market in 50+ countries

  • Registered in majority as a class 1 medical device  

CELLIANT -  a performance textile that converts body heat into infrared energy - is designated as a Class 1 Medical Device in Australia, Canada, the EU and European Economic Area (EEA), Japan, New Zealand, the United Arab Emirates, the United Kingdom and the United States. CELLIANT is cleared to market in China, India, Indonesia, Korea, Malaysia, Mexico, Peru, Philippines, Russia, Saudi Arabia, Singapore, South Africa, Taiwan, Thailand and Vietnam, with more countries and regions to follow.

  • Registered in majority as a class 1 medical device  

CELLIANT -  a performance textile that converts body heat into infrared energy - is designated as a Class 1 Medical Device in Australia, Canada, the EU and European Economic Area (EEA), Japan, New Zealand, the United Arab Emirates, the United Kingdom and the United States. CELLIANT is cleared to market in China, India, Indonesia, Korea, Malaysia, Mexico, Peru, Philippines, Russia, Saudi Arabia, Singapore, South Africa, Taiwan, Thailand and Vietnam, with more countries and regions to follow.

In 2017, the FDA determined that products containing CELLIANT are medical devices as defined in section 201(h) of the Federal Food, Drug and Cosmetic Act and are general wellness products because they are intended to temporarily increase blood flow and local circulation at the site of the application in healthy individuals.
 
At Hologenix®, whose CELLIANT® infrared technology is an ingredient in world-class brands across many categories, science matters. The company has a distinguished Science Advisory Board composed of experts in the fields of photobiology, nanotechnology, sleep medicine, diabetes and wound care. The Science Advisory Board has overseen nine peer-reviewed published studies that collectively demonstrate CELLIANT’s effectiveness and the benefits of infrared energy. This claim set provides the basis for products containing CELLIANT to be designated as a Class 1 Medical Device in 38 countries and cleared to market in 15, with more countries and regions to follow. This elevated status in 53 countries translates to CELLIANT being an ideal partner for global companies who are seeking innovation in textiles to distinguish their products.   

“We have laid the groundwork for our partner brands to capitalize on the benefits of our infrared technology and to enhance their ability to do business,” said Seth Casden, Hologenix co-founder and CEO.  “We firmly believe that regulatory status matters and that is why we have grown the number of countries we have such relationships with by over a third in the last three years. It is definitely a competitive advantage of our company and CELLIANT.”

“Globally, the awareness of the benefits of infrared textiles, which absorb body heat and reflect it back as therapeutic infrared energy, has grown exponentially over the last 10 years,” continued Casden. “And in the United States infrared is gaining a strong foothold.”

Source:

Hologenix

(c) Lenzing AG
03.10.2022

Lenzing: Ground-mounted photovoltaic system becomes operational

The Lenzing Group and VERBUND, an energy transition company, launched the first development stage of the largest ground-mounted photovoltaic system in Upper Austria. Together with its energy partner VERBUND, Lenzing is also paving the way for the transition to zero-emission mobility. The installation of electric vehicle charging infrastructure at the company’s premises underlines Lenzing’s commitment to the energy transition process.

The Lenzing Group and VERBUND, an energy transition company, launched the first development stage of the largest ground-mounted photovoltaic system in Upper Austria. Together with its energy partner VERBUND, Lenzing is also paving the way for the transition to zero-emission mobility. The installation of electric vehicle charging infrastructure at the company’s premises underlines Lenzing’s commitment to the energy transition process.

Thanks to the ground-mounted photovoltaic system at the “Ofenloch” landfill site, Lenzing, in conjunction with VERBUND, is consistently moving forward on the path to a carbon-free energy supply and has commissioned the first half of the new photovoltaic system with a peak power of 2,780 kWp. Full commissioning of the system with a peak power of 5,560 kWp is envisaged in mid-October. Annual electricity production will amount to 6,000,000 kWh, which is expected to cut CO2 emissions by some 4,400 tonnes per year. The Austrian pioneer in fiber production already commissioned three rooftop photovoltaic systems in spring/summer of 2022, with a peak power of 1,454 kWp and annual electricity production of some 1,508,000 kWh. The electricity flows directly into the company’s on-site production and will also power electric charging stations in future. In the first development stage, 16 wallboxes are set to be installed by the end of the year. A further 32 charging points are planned for 2023. The charging stations will be accessible to staff, visitors and the company’s own vehicle fleet.

“VERBUND’s photovoltaic operator model allows us to make the transition to solar power without incurring investment costs or risks. Thanks to the constant expansion in renewable energy, we remain on course to ecologize the value chain, while optimizing our carbon footprint, cutting costs and reducing the load on the grid, as we are using nearly 100 percent of photovoltaic power in our production,” explains Christian Skilich, Chief Pulp Officer of the Lenzing Group.

More information:
Lenzing energy consumption CO2
Source:

Lenzing AG

(c) dullboiiiii
16.09.2022

Premium Group launches Charity Collection at The Ground event in Berlin

In cooperation with Platte Berlin, deadHYPE, Visionary Services and the Fashion Council Germany, The Ground invited to the Studio2Retail block party in Mitte. 950 guests, including creatives, influencers and the young Gen-Z Berlin fashion scene, came together for the first time since The Ground premiered in July to exchange and celebrate change.

The community had the exclusive opportunity to buy the limited pieces of the MUST-HAVE PEACE charity collection, which the Premium Group team initiated to support the people suffering from the war in Ukraine.

The collection includes 22 special items of clothing and accessories from 11 brands and designers from the Premium Group cosmos, of which 100% of the proceeds go to Be an Angel.

In cooperation with Platte Berlin, deadHYPE, Visionary Services and the Fashion Council Germany, The Ground invited to the Studio2Retail block party in Mitte. 950 guests, including creatives, influencers and the young Gen-Z Berlin fashion scene, came together for the first time since The Ground premiered in July to exchange and celebrate change.

The community had the exclusive opportunity to buy the limited pieces of the MUST-HAVE PEACE charity collection, which the Premium Group team initiated to support the people suffering from the war in Ukraine.

The collection includes 22 special items of clothing and accessories from 11 brands and designers from the Premium Group cosmos, of which 100% of the proceeds go to Be an Angel.

Be an Angel e.V. is an initiative of people from creative industries who are committed to the sustainable integration of people with a refugee background. Under the direction of Chairman Andreas Tölke, the team has been working intensively for the people from Ukraine for weeks, organising trips to Germany for refugees from Moldova, activating a nationwide network for accommodation and supplying hospitals in Odessa, Kyiv and Lemberg with medicine.

Source:

PREMIUM Exhibitions GmbH

PREMIUM GROUP & JOOR present their first Hybrid Trade Fair Platform (c) Premium Exhibitions GmbH
09.06.2022

PREMIUM GROUP & JOOR present hybrid Trade Fair Platform

Premium Group and JOOR have renewed their partnership to power the SS23 PREMIUM and SEEK trade shows through JOOR’s digital platform, underpinning their belief in the power of a hybrid approach to wholesale.

From 7 - 9 July, buyers visiting the shows in Berlin will be able to learn more about and shop from exhibitors in a new hybrid way. Buyers can discover the full PREMIUM and SEEK portfolio of brands both in-person and online 24/7 by visiting JOOR Passport, JOOR's digital trade show destination.

Premium Group and JOOR have renewed their partnership to power the SS23 PREMIUM and SEEK trade shows through JOOR’s digital platform, underpinning their belief in the power of a hybrid approach to wholesale.

From 7 - 9 July, buyers visiting the shows in Berlin will be able to learn more about and shop from exhibitors in a new hybrid way. Buyers can discover the full PREMIUM and SEEK portfolio of brands both in-person and online 24/7 by visiting JOOR Passport, JOOR's digital trade show destination.

Premium Group unites its various show locations to one cosmos for SS23 at Messe Berlin. The PREMIUM and SEEK shows will be joined by two further components— The Ground is a D2C creative platform for brands and consumers to meet, connect, and collaborate through one-of-a-kind experiences, engaging content, and innovative products, while FASHIONTECH, features masterclasses and panel discussions from the fashion industry’s most brilliant minds. A calendar of content includes deep dives into strong, successful, and sustainable strategies. As part of the content offer, JOOR will facilitate a masterclass on ‘Digital Wholesale’ and a future-looking roundtable discussion with four leading fashion brands on the FASHIONTECH stage.

Throughout the duration of the show, in-person buyers and visitors will have the ability to shop via the Premium Group mobile app. By simply scanning a brand’s corresponding QR code, visitors will link to the brand’s custom profile on JOOR Passport and be able to shop collections directly on the platform. JOOR Passport will also extend the duration of the shows by up to three months, allowing brands to continue wholesale selling digitally outside the window of the physical show.

JOOR and Premium Group’s flexible hybrid format allows visitors and brands a seamless digital and physical introduction to each other and their collections, the opportunity to connect in an efficient, effective, and longer term way, and the convenience to shop the show 24 hours a day from anywhere in the world.

Brands participating include Drykorn, Closed, Bertoni of Denmark, Veja, Ecoalf, Wrangler and Absolut Cashmere.

Source:

Premium Exhibitions GmbH

Photo: Erema
07.04.2022

EREMA: New R&D centre for innovative recycling technologies

Construction machinery rolls into action again. The ground-breaking ceremony at the EREMA site in Ansfelden on April, 6 signals the start of work on a new R&D centre. Two halls with a total area of 1,550 square metres and a new office building with 50 workplaces will be built. The R&D centre will offer cross-departmental and cross-company test machines and laboratory for research and development of plastics recycling technologies to further advance the circular economy. Completion is scheduled for February 2023.

Plastics recycling is currently evolving very rapidly from a niche to a trend. This is driven by the legislative targets for plastics recycling that the European Union and many countries around the world have enacted, as well as by the European Green Deal, which aims to make Europe the first climate-neutral continent and in which the circular economy plays a very central role.

Construction machinery rolls into action again. The ground-breaking ceremony at the EREMA site in Ansfelden on April, 6 signals the start of work on a new R&D centre. Two halls with a total area of 1,550 square metres and a new office building with 50 workplaces will be built. The R&D centre will offer cross-departmental and cross-company test machines and laboratory for research and development of plastics recycling technologies to further advance the circular economy. Completion is scheduled for February 2023.

Plastics recycling is currently evolving very rapidly from a niche to a trend. This is driven by the legislative targets for plastics recycling that the European Union and many countries around the world have enacted, as well as by the European Green Deal, which aims to make Europe the first climate-neutral continent and in which the circular economy plays a very central role.

However, there is not just one recycling solution for all types of plastic waste, but rather different solutions depending on the type of plastic, the product and the application intended for the recycled plastic. While some plastics processing loops, such as for PET bottles, have already been closed, many other plastic waste streams still require a great deal of R&D in cooperation with everyone involved in the value chain to produce recycled pellets that meet the very highest standards for the production of new products. More space will be available for this in the new centre.

R&D is decentralised at EREMA. In recent years, approximately 5 percent of turnover was reinvested annually in research and development. Employees from different departments handle process engineering challenges, innovations in mechanical engineering and automation technology, and special technologies with a view to further improving the quality of recycled pellets. They also focus on new recycling technologies for waste plastic materials for which there is currently no satisfactory circular economy solution. The decisive factor here is also to exploit the potential of digitalisation. By collecting and analysing machine data, not only can recycling processes and product quality be further improved, but we can also develop our digital service offering for our customers. Such offerings include customer-specific information tools that feature plant and process data, predictive maintenance and online support as well as commissioning via remote access.

For material tests, which are necessary for research and development work, an expanded machine park will be available following completion of the new R&D centre. Here, the recycling process can be evaluated end-to-end, including upstream and downstream processes such as shredding and further processing of the recycled pellets. The material tests are supported by detailed analysis in the professionally equipped laboratory, which will be relocated to the new premises and upgraded where necessary with the very latest lab equipment.

More information:
EREMA plastics recycling
Source:

EREMA Engineering Recycling Maschinen und Anlagen GmbH

LAMICOR-CL Laminator (c) Reifenhäuser
14.03.2022

Reifenhäuser Cast Sheet Coating presents new Ultrathin Coating process at ICE Europe

Reifenhäuser Cast Sheet Coating - specialists for cast film, sheet extrusion and extrusion coating lines - will showcase a new production process for cost-effective film/nonwoven composites with an exceptionally low grammage at ICE (International Converting Exhibition) Europe. The leading international trade show for paper, film, and foil conversion and processing will be held at Messe München (Munich trade fair center) from March 15-17, 2022.

Reifenhäuser Cast Sheet Coating - specialists for cast film, sheet extrusion and extrusion coating lines - will showcase a new production process for cost-effective film/nonwoven composites with an exceptionally low grammage at ICE (International Converting Exhibition) Europe. The leading international trade show for paper, film, and foil conversion and processing will be held at Messe München (Munich trade fair center) from March 15-17, 2022.

The Covid-19 pandemic and current supply shortages have exposed the dependence of companies on global supply chains. This situation is both a warning signal and an opportunity to boost and reorganize the local production of semi-finished products from the ground up. Reifenhäuser Cast Sheet Coating has now developed a trend-setting production process termed Ultrathin Coating, in particular for the sector of medical protective clothing. The process will permit customers to produce particularly lightweight film/nonwoven composites with greater cost efficiency and, as a result, more competitively. The patent-pending process has several advantages: It cuts film grammage by 66%; material consumption in the overall composite is reduced by 28%; and it slashes costs by up to 34% compared to conventional semi-finished products. Significant cost savings are achieved in various ways, for example, by replacing hotmelt adhesives, which reduces line maintenance to a great extent at the same time.

Mark Borutta, Sales & Marketing Specialist bei Reifenhäuser Cast Sheet Coating, erklärt: „Wir erleben derzeit einen nachhaltig wachsenden Mehrbedarf für medizinische Schutzbekleidung verbunden mit einer Rückholstrategie für lokale Produktionskapazitäten. Vor diesem Hintergrund erzielen Produzenten mit ‚Ultrathin Coating‘ einen schnellen Return on Invest und hohe Profitabilität – auch bei einer Produktion innerhalb Europas.“ Die Vlies-erfahrene Schwesterfirma Reifenhäuser Reicofil –führender Hersteller von Vliesstoffanlagen – hat die Entwicklung unterstützt.

Mark Borutta, Sales & Marketing specialist at Reifenhäuser Cast Sheet Coating, explains: "We are currently experiencing a sustained increase in demand for medical protective clothing combined with a return strategy for local production capacity. Against this backdrop, producers achieve a fast return on investment and high profitability with Ultrathin Coating - even when production is based in Europe." The sister company, Reifenhäuser Reicofil, an experienced and global leading manufacturer of nonwoven lines, provided their support to the development.

Even if manufacturers already produce medical protective clothing and prefer to handle the coating process internally in the future instead of importing the necessary composites, it is worthwhile to set up an in-house production facility. In either case, the investment in Ultrathin Coating usually pays for itself in less than 12 months. The lower material input also reduces the consumption of fossil raw materials and this in turn responds to the increased demand for more sustainable products.

More information:
Reifenhäuser high-tech coatings
Source:

Reifenhäuser

09.03.2022

adidas delivers strong results in 2021

  • adidas expects double-digit sales growth in 2022

Major developments FY 2021

•    Currency-neutral revenues up 16% driven by growth in all markets
•    Excellent top-line momentum in EMEA, North America and Latin America with strong double-digit increases in each region
•    Double-digit growth in DTC reflecting improvements in both online and offline
•    Gross margin increases to 50.7% driven by higher full-price sales and better inventory management  
•    Operating margin increases 5.3 percentage points to 9.4%  
•    Net income from continuing operations grows more than € 1 billion to € 1.492 billion
•    Executive and Supervisory Boards propose dividend increase of 10% to € 3.30 per share

Outlook for FY 2022

  • adidas expects double-digit sales growth in 2022

Major developments FY 2021

•    Currency-neutral revenues up 16% driven by growth in all markets
•    Excellent top-line momentum in EMEA, North America and Latin America with strong double-digit increases in each region
•    Double-digit growth in DTC reflecting improvements in both online and offline
•    Gross margin increases to 50.7% driven by higher full-price sales and better inventory management  
•    Operating margin increases 5.3 percentage points to 9.4%  
•    Net income from continuing operations grows more than € 1 billion to € 1.492 billion
•    Executive and Supervisory Boards propose dividend increase of 10% to € 3.30 per share

Outlook for FY 2022

•    Currency-neutral sales to increase at a rate between 11% and 13%, already reflecting up to € 250 million of risk in Russia/CIS business related to the war in Ukraine
•    Gross margin to increase to a level of between 51.5% and 52.0%
•    Operating margin to increase to a level of between 10.5% and 11.0%
•    Net income from continuing operations to grow to between € 1.8 billion and € 1.9 billion

Kasper Rorsted, CEO of adidas: “Unfortunately, we release our 2021 results in unsettling times. Our thoughts and prayers are with the Ukrainian people, our teams on the ground and everyone affected by the war. We strongly condemn any form of violence and stand in solidarity with all those calling for peace. We also provide immediate humanitarian aid to those in need of support. We will continue to follow the situation closely and take future business decisions and actions as needed, always prioritizing our employee’s safety and support.”

“In 2021, we delivered a strong set of results despite several external factors weighing on both demand and supply throughout the year”, Kasper Rorsted continued. “Wherever markets operated without major disruptions we have been experiencing strong top-line momentum. This is reflected in double-digit revenue growth in EMEA, North America and Latin America. While we continued to invest heavily into our brand, our direct-to-consumer business, and our digital transformation, we improved our bottom-line by more than € 1 billion. Taking it all together, 2021 was a successful first year within our new strategic cycle. In 2022, we will build on this momentum and continue to grow both our top- and bottom-line at double-digit rates amid heightened uncertainty.”

More information:
adidas Financial Year 2021
Source:

adidas Media Relations

KARL MAYER: New perspectives through precise lace symmetry (c) KARL MAYER
Examples of Symm-Net designs
08.03.2022

KARL MAYER: New perspectives through precise lace symmetry

  • Symm-Net articles made using the new MJ 92/1 B impress with their perfectly symmetrical appearance

Lace is a delicate seducer. The more finely crafted its ground structure, the more effective its refined designs come across, and as such, the higher the overall quality. The innovative Symm-Net pieces, which can be produced on KARL MAYER’s new MJ 92/1 B, have a look that sets new standards.

  • Symm-Net articles made using the new MJ 92/1 B impress with their perfectly symmetrical appearance

Lace is a delicate seducer. The more finely crafted its ground structure, the more effective its refined designs come across, and as such, the higher the overall quality. The innovative Symm-Net pieces, which can be produced on KARL MAYER’s new MJ 92/1 B, have a look that sets new standards.

Lace offering maximum clarity and balance
Symm-Net lace is characterised by an extremely delicate design, offering absolute symmetry. This is thanks to the particular configuration of the MJ 92/1 B – the new multi-bar jacquard raschel machine features a split-design jacquard bar with separate threading, and can thus work using both equal and counter lapping. In addition, the newcomer has two ground guide bars at the back for counterlapped elastane. For Symm-Net’s ground structure, GB1 works a pillar notation whilst the jacquard bar works a counter-lapped inlay. The result is a net structure with absolutely symmetrical, clearly defined symmetry. To perfect the geometry, the two elastane bars with split threading – i.e. 1 in, 1 out – and counter-lapping patterning mirror the movement of the jacquard bar.

The lapping patterns thus look as follows:
• JB 91: 0 – 0 / 2 – 2 // and JB 92: 2 – 2 / 0 – 0 //
• GB 93: 0 – 0 / 1 – 1 // and GB 94: 1 – 1 / 0 – 0 //

The ground structure is not only more uniform, but also more stable than its counterparts manufactured with equal lapping. The advantages of Symm-Net are particularly visible when working finer mesh constructions. “When it comes to a delicate appearance, Leavers lace traditionally sets the standard; in particular, Endsor- Net is known for its delicate design. There is hardly any discernible difference with Symm-Net, which should open up new design perspectives, especially for the premium brands in Europe,” explains Jamie Heather, lace expert at KARL MAYER. Symm-Net offers a further advantage thanks to its simple pattern development. For example, the patterning process does not require any updates to the commonly used patterning software, SAPO and ProCad – only the machine database needs to be adapted.

High design flexibility
In addition to the Symm-Net variants, all existing patterns of the OJ 91/1 B, MJ 85/1 B and OJ 83/1 B can be implemented on the MJ 92/1 B in E 24 without restrictions; switching from the new counter lapping to the traditional JACQUARDTRONIC® LACE pattern is seamless. Jamie Heather is certain this flexibility will give customers a real competitive advantage.

All the prerequisites for a bestseller
The MJ 92/1 B has been successfully offered on the market since May 2021. The newcomer is available in gauge E 24, with a working width of 134". Despite its high design flexibility, it still offers first-class productivity. It can also reach speeds of up to 800 rpm when producing Symm-Net articles. To allow for diverse product design, 88 pattern guide bars and two elastane bars, arranged in 16 shogging lines, are available. Thanks to these features, the MJ 92/1 B mainly produces elastic galloon lace, but also all-over lace for stylish lingerie items.

Source:

KARL MAYER Verwaltungsgesellschaft mbH

24.02.2022

Renewable Carbon as a Guiding Principle for Sustainable Carbon Cycles

  • Renewable Carbon Initiative (RCI) published a strategy paper on the defossilisation of the chemical and material industry with eleven policy recommendations

The Renewable Carbon Initiative, an interest group of more than 30 companies from the wide field of the chemical and material value chains, was founded in 2020 to collaboratively enable the chemical and material industries to tackle the challenges in meeting the climate goals set by the European Union and the sustainability expectations held by societies around the globe.

RCI addresses the core of the climate problem: 72% of anthropogenic climate change is caused directly by extracted fossil carbon from the ground. In order to rapidly mitigate climate change and achieve our global ambition for greenhouse gas emission reductions, the inflow of further fossil carbon from the ground into our system must be reduced as quickly as possible and in large scale.

  • Renewable Carbon Initiative (RCI) published a strategy paper on the defossilisation of the chemical and material industry with eleven policy recommendations

The Renewable Carbon Initiative, an interest group of more than 30 companies from the wide field of the chemical and material value chains, was founded in 2020 to collaboratively enable the chemical and material industries to tackle the challenges in meeting the climate goals set by the European Union and the sustainability expectations held by societies around the globe.

RCI addresses the core of the climate problem: 72% of anthropogenic climate change is caused directly by extracted fossil carbon from the ground. In order to rapidly mitigate climate change and achieve our global ambition for greenhouse gas emission reductions, the inflow of further fossil carbon from the ground into our system must be reduced as quickly as possible and in large scale.

In the energy and transport sector, this means a vigorous and fast expansion of renewable energies, hydrogen and electromobility, the so-called decarbonisation of these sectors. The EU has already started pushing an ambitious agenda in this space and will continue to do so, for instance with the recently released ‘Fit for 55’ package.

However, these policies have so far largely ignored other industries that extract and use fossil carbon. The chemical and material industries have a high demand for carbon and are essentially only possible with carbon-based feedstocks, as most of their products cannot do without carbon. Unlike energy, these sectors cannot be “decarbonised”, as molecules will always need carbon. The equivalent to decarbonisation via renewable energy in the energy sector is the transition to renewable carbon in the chemical and derived materials industries. Both strategies avoid bringing additional fossil carbon from the ground into the cycle and can be summarised under the term “defossilisation”.

To decouple chemistry from fossil carbon, the key question is which non-fossil carbon sources can be used in the future. Rapid developments in biosciences and chemistry have unlocked novel, renewable and increasingly affordable sources of carbon, which provide us with alternative solutions for a more sustainable chemicals and materials sector. These alternative sources are: biomass, utilisation of CO2 and recycling. They are combined under the term “renewable carbon”. When used as a guiding principle, renewable carbon provides a clear goal to work towards with sufficient room to manoeuvre for the whole sector. It enables the industry to think out of the box of established boundaries and stop the influx of additional fossil carbon from the ground.

The systematic change to renewable carbon will not only require significant efforts from industry, but must be supported by policy measures, technology developments and major investments. In order to implement a rapid and high-volume transition away from fossil carbon, and to demonstrate its impact, a supportive policy framework is essential. The emphasis should be put on sourcing carbon responsibly and in a manner that does not adversely impact the wider planetary boundaries nor undermines societal foundations. An overarching carbon management strategy is required that also takes specific regional and application-related features into account, to identify the most sustainable carbon source from the renewable carbon family. This will allow for a proper organisation of the complex transition from today’s fossil carbon from the ground to renewable energy and to renewable carbon across all industrial sectors.

RCI has developed eleven concrete policy recommendations on renewable carbon, carbon management, support for the transformation of the existing chemical infrastructure and the transformation of biofuel plants into chemical suppliers. The policy paper “Renewable Carbon as a Guiding Principle for Sustainable Carbon Cycles” is freely available for download in both a short version and a long version.


Link for Download: https://renewable-carbon-initiative.com/media/library/

Source:

Renewable Carbon Initiative (RCI)

22.12.2021

Frankfurt Fashion Week Showcases finden statt

  • Frankfurt Fashion Week Tradeshow - Premieren vom 18. bis 20. Januar 2022 in Frankfurt werden verschoben, Showcases und City-Events finden statt
  • Aufgrund der weltweit wieder zunehmend angespannten Covid-19-Situation und im Lichte der gestrigen Beschlüsse von Bund & Ländern wird die Frankfurt Fashion Week (17. bis 21. Januar 2022) nur in Teilen physisch stattfinden können. Showcases, Vernissagen, Installationen und Ausstellungen können nach aktuellem Stand auf der Basis passgenauer 2G und 2G+ Konzepte weiterhin durchgeführt werden.
  • Konferenzen, Talks und Panels werden teilweise in reduzierter, hybrider Form realisiert. Die Fachbesucher*innenevents – Neonyt, Premium, Seek, The Ground und Val:ue – verschieben die physische Frankfurt-Premiere ihrer Veranstaltungen jedoch in den Juli 2022.
  • Frankfurt Fashion Week Tradeshow - Premieren vom 18. bis 20. Januar 2022 in Frankfurt werden verschoben, Showcases und City-Events finden statt
  • Aufgrund der weltweit wieder zunehmend angespannten Covid-19-Situation und im Lichte der gestrigen Beschlüsse von Bund & Ländern wird die Frankfurt Fashion Week (17. bis 21. Januar 2022) nur in Teilen physisch stattfinden können. Showcases, Vernissagen, Installationen und Ausstellungen können nach aktuellem Stand auf der Basis passgenauer 2G und 2G+ Konzepte weiterhin durchgeführt werden.
  • Konferenzen, Talks und Panels werden teilweise in reduzierter, hybrider Form realisiert. Die Fachbesucher*innenevents – Neonyt, Premium, Seek, The Ground und Val:ue – verschieben die physische Frankfurt-Premiere ihrer Veranstaltungen jedoch in den Juli 2022.

In Anbetracht der durch den Expertenrat der Bundesregierung prognostizierten Zuspitzung der Pandemielage, die die Omikron-Variante für Deutschland mit sich bringen könnte, ist es für die Messe Frankfurt als Veranstalterin der Messeformate Neonyt und Val:ue sowie für die Premium Group als Veranstalterin der Messen Premium und Seek, des Fashion-Festivals The Ground sowie der Fashiontech-Konferenz aktuell nicht möglich, die Planungen zur erstmaligen Durchführung der großen Mode-Fachbesucher*innenmessen in Frankfurt weiter voranzutreiben. Auf die Entwicklungen des aktuellen Pandemiegeschehens reagierte ein Großteil der auf den Messen ausstellenden und besuchenden Unternehmen bereits jetzt mit Reise- und Messebesuchsverboten aus Gründen der Fürsorgepflicht gegenüber ihren Mitarbeitenden sowie zum Schutz vor gesundheitlichen Risiken.

Trotzdem arbeiten die Organisator*innen der Frankfurt Fashion Week daran, ein ausgewähltes Programm mit persönlichen Begegnungsformaten im coronakonformen Rahmen vor Ort in Frankfurt zu ermöglichen, um der Branche die Gelegenheit zum Austausch wertvoller Impulse zu geben. „Wir spüren das ausgeprägte Bedürfnis der Branche nach persönlichen Begegnungen. Wir sind daher davon überzeugt, dass wir mit den Showcases, Events und Konferenzen, die wir im Januar anlässlich der Frankfurt Fashion Week in dem Umfang realisieren, wie er dann coronakonform möglich sein wird, ein positives Signal des Aufbruchs aus Frankfurt senden werden“, sagt Olaf Schmidt, Vice President Textiles und Textile Technologies der Messe Frankfurt.

Weitere Informationen zum detaillierten Programm der Showcases, Events und Konferenzen finden Sie bereits auf www.frankfurt.fashion und werden sukzessive bekanntgegeben.

Political Tailwind for Alternative Carbon Sources (c) Renewable Carbon Initiative
European Policy under the new green deal
22.12.2021

Political Tailwind for Alternative Carbon Sources

  • More than 30 leading pioneers of the chemical and material sector welcome the latest political papers from Brussels, Berlin and Düsseldorf

The political situation for renewable carbon from biomass, CO2 and recycling for the defossilisation of the chemical and materials industry has begun to shift fundamentally in Europe. For the first time, important policy papers from Brussels and Germany take into consideration that the term decarbonisation alone is not sufficient, and that there are important industrial sectors with a permanent and even growing carbon demand. Finally, the need for a sustainable coverage of this carbon demand and the realisation of sustainable carbon cycles have been identified on the political stage. They are elemental to the realisation of a sustainable chemical and derived materials industry.

  • More than 30 leading pioneers of the chemical and material sector welcome the latest political papers from Brussels, Berlin and Düsseldorf

The political situation for renewable carbon from biomass, CO2 and recycling for the defossilisation of the chemical and materials industry has begun to shift fundamentally in Europe. For the first time, important policy papers from Brussels and Germany take into consideration that the term decarbonisation alone is not sufficient, and that there are important industrial sectors with a permanent and even growing carbon demand. Finally, the need for a sustainable coverage of this carbon demand and the realisation of sustainable carbon cycles have been identified on the political stage. They are elemental to the realisation of a sustainable chemical and derived materials industry.

The goal is to create sustainable carbon cycles. This requires comprehensive carbon management of renewable sources, which includes carbon from biomass, carbon from Carbon Capture and Utilisation (CCU) – the industrial use of CO2 as an integral part – as well as mechanical and chemical recycling. And only the use of all alternative carbon streams enables a true decoupling of the chemical and materials sector from additional fossil carbon from the ground. Only in this way can the chemical industry stay the backbone of modern society and transform into a sustainable sector that enables the achievement of global climate goals. The Renewable Carbon Initiative’s (RCI) major aim is to support the smart transition from fossil to renewable carbon: utilising carbon from biomass, CO2 and recycling instead of additional fossil carbon from the ground. This is crucial because 72% of the human-made greenhouse gas emissions are directly linked to additional fossil carbon. The RCI supports all renewable carbon sources available, but the political support is fragmented and differs between carbon from biomass, recycling or carbon capture and utilisation (CCU). Especially CCU has so far not been a strategic objective in the Green Deal and Fit-for-55.

This will change fundamentally with the European Commission's communication paper on “Sustainable Carbon Cycles” published on 15 December. The position in the paper represents an essential step forward that shows embedded carbon has reached the political mainstream – supported by recent opinions from members of the European parliament and also, apparently, by the upcoming IPCC assessment report 6. Now, CCU becomes a recognised and credible solution for sustainable carbon cycles and a potentially sustainable option for the chemical and  material industries. Also, in the political discussions in Brussels, the term “defossilation” is appearing more and more often, complementing or replacing the term decarbonisation in those areas where carbon is indispensable. MEP Maria da Graça Carvahlo is among a number of politicians in Brussels who perceive CCU as an important future industry, putting it on the political map and creating momentum for CCU. This includes the integration of CCU into the new Carbon Removal Regime and the Emission Trading System (ETS).

As the new policy documents are fully in line with the strategy of the RCI, the more than 30 member companies of the initiative are highly supportive of this new development and are ready to support policy-maker with data and detailed suggestions for active support and the realisation of sustainable carbon cycles and a sound carbon management. The recent political papers of relevance are highlighted in the following.

Brussels: Communication paper on “Sustainable Carbon Cycles”
On 15 December, the European Commission has published the communication paper “Sustainable Carbon Cycles” . For the first time, the importance of carbon in different industrial sectors is clearly stated. One of the key statements in the paper is the full recognition of CCU for the first time as a solution for the circular economy, which includes CCU-based fuels as well. The communication paper distinguishes between bio-based CO2, fossil CO2 and CO2 from direct air capture when addressing carbon removal and it also announces detailed monitoring of the different CO2 streams. Not only CCU, but also carbon from the bioeconomy is registered as an important pillar for the future. Here, the term carbon farming has been newly introduced, which refers to improved land management practices that result in an increase of carbon sequestration in living biomass, dead organic matter or soils by enhancing carbon capture or reducing the release of carbon. Even though the list of nature-based carbon storage technologies is non-exhaustive in our view, we strongly support the paper’s idea to deem sustainable land and forest management as a basis for the bioeconomy more important than solely considering land use as a carbon sink. Surprisingly, chemical recycling, which is also an alternative carbon source that substitutes additional fossil carbon from the ground (i.e. carbon from crude oil, natural gas or from coal), is completely absent from the communication paper.

Berlin: Coalition paper of the new German Government: “Dare more progress – alliance for freedom, justice and sustainability”
The whole of Europe is waiting to see how the new German government of Social Democrats, Greens and Liberals will shape the German climate policy. The new reform agenda focuses in particular on solar and wind energy as well as especially hydrogen. Solar energy is to be expanded to 200 GW by 2030 and two percent of the country's land is to be designated for onshore wind energy. A hydrogen grid infrastructure is to be created for green hydrogen, which will form the backbone of the energy system of the future – and is also needed for e-fuels and sustainable chemical industry, a clear commitment to CCU. There is a further focus on the topic of circular economy and recycling. A higher recycling quota and a product-specific minimum quota for the use of recyclates and secondary raw materials should be established at European level. In the coalition paper, there is also a clear commitment to chemical recycling to be found. A significant change for the industry is planned to occur in regards to the so-called “plastic tax” of 80 cents per kilogram of non-recycled plastic packaging. This tax has been implemented by the EU, but most countries are not passing on this tax to the manufacturers and distributors, or only to a limited extent. The new German government now plans to fully transfer this tax over to the industry.

Düsseldorf: Carbon can protect the climate – Carbon Management Strategy North Rhine-Westphalia (NRW)
Lastly, the RCI highly welcomes North Rhine-Westphalia (NRW, Germany) as the first region worldwide to adopt a comprehensive carbon management strategy, a foundation for the transformation from using additional fossil carbon from the ground to the utilisation of renewable carbon from biomass, CO2 and recycling. For all three alternative carbon streams, separate detailed strategies are being developed to achieve the defossilisation of the industry. This is all the more remarkable as North Rhine-Westphalia is the federal state with the strongest industry in Germany, in particular the chemical industry. And it is here, of all places, that a first master plan for the conversion of industry from fossil carbon to biomass, CO2 and recycling is implemented. If successful, NRW could become a global leader in sustainable carbon
management and the region could become a blueprint for many industrial regions.

04.11.2021

Frankfurt Fashion Week gibt Game Changern der Modeindustrie eine Plattform

Gemeinsam globale Lösungen finden, um die Welt zum Positiven zu verändern. Einen Wendepunkt herbeiführen. Dafür setzen sich zahlreiche Unternehmen der Textil- und Modebranche ein. Durch ihr Engagement, ihren Idealismus und ihre Innovationskraft treiben sie den positiven Wandel in besonderem Maße voran.

Die Frankfurt Fashion Week gibt den Game Changern der Modeindustrie eine Plattform – indem sie die Leitthemen Nachhaltigkeit und Digitalisierung thematisch auf multidisziplinären Konferenzen, Panels und Diskussionsforen und im digitalen FFW Studio in den Vordergrund hebt. Zudem macht sie Best Practices auf den B2B Tradeshows Neonyt, Premium, Seek und Val:ue sowie auf dem B2C Fashion-Festival The Ground vom 18. bis 20. Januar 2022 auch physisch erlebbar.

Gemeinsam globale Lösungen finden, um die Welt zum Positiven zu verändern. Einen Wendepunkt herbeiführen. Dafür setzen sich zahlreiche Unternehmen der Textil- und Modebranche ein. Durch ihr Engagement, ihren Idealismus und ihre Innovationskraft treiben sie den positiven Wandel in besonderem Maße voran.

Die Frankfurt Fashion Week gibt den Game Changern der Modeindustrie eine Plattform – indem sie die Leitthemen Nachhaltigkeit und Digitalisierung thematisch auf multidisziplinären Konferenzen, Panels und Diskussionsforen und im digitalen FFW Studio in den Vordergrund hebt. Zudem macht sie Best Practices auf den B2B Tradeshows Neonyt, Premium, Seek und Val:ue sowie auf dem B2C Fashion-Festival The Ground vom 18. bis 20. Januar 2022 auch physisch erlebbar.

„Die Modebranche verbindet weltweit Gleichgesinnte. Wir müssen uns auf die wesentlichen Themen für die Zukunft der Mode konzentrieren. Premium, Seek und The Ground sind ein Dreiklang, ein Trade- und Marketplace of Purpose and Ideas. B2B und B2C zu einem Zeitpunkt in einer Location zusammen zu bringen – das hat es in der Form noch nie gegeben und die Zeit dafür ist reif. Gemeinsam mit unseren Partnerevents von der Messe Frankfurt bringen wir auf der Frankfurt Fashion Week Retail, Brands, Influencer, Medien sowie Konsumenten und Konsumentinnen zusammen. Gerade nach der Pandemie ist dies unglaublich spannend. Wir verstehen uns als Connector und Enabler, aber auch als Innovator und Impulsgeber. Wir sprechen mit etablierten Partnern, vor allem aber kennen wir die neue Generation und stellen sie dem Handel und dem Ökosystem vor. Wir bringen im Januar in Frankfurt alle zusammen und eins ist jetzt schon klar - nichts ist mehr wie es mal war und es ist wichtig, dass wir den Herausforderungen unserer Zeit gemeinsam begegnen und voneinander lernen. Brands wie Absolut Cashmere, Ecoalf, Veja und Arys sind nur einige wenige Beispiele der zukunftsweisenden Labels. Wir freuen uns unglaublich darüber, wie viel in der Branche gerade angestoßen wird und was es alles Neues gibt. Diese Transformation werden wir in Frankfurt weiter herausstellen“, sagt Anita Tillmann, Managing Partner der Premium Group.

Ein erster Ausblick auf das, was es im kommenden Januar im Rahmen der Frankfurt Fashion Week auf der Neonyt zu sehen geben wird finden Sie im Anhang.

Source:

Messe Frankfurt GmbH

THE GROUND debuts at Frankfurt Fashion Week
The Ground Logo
20.10.2021

THE GROUND debuts at Frankfurt Fashion Week

  • A purpose-driven B2C festival for a young and optimistic generation

With THE GROUND, the PREMIUM GROUP is organizing a major fashion festival for young end consumers for the first time. Responsible for the event concept, in addition to Anita Tillmann, Jörg Arntz and the PREMIUM GROUP - team, is B2C expert Kai Zollhöfer, who already helped to make the Bread & Butter by Zalando a crowd puller.

“THE GROUND is a B2C festival aimed at a young, purpose-driven generation. This new generation has a strong stance on current social and environmental challenges and expects brands to reflect them. The overriding topics at THE GROUND are therefore sustainability, diversity and equality”, says Kai Zollhöfer.

  • A purpose-driven B2C festival for a young and optimistic generation

With THE GROUND, the PREMIUM GROUP is organizing a major fashion festival for young end consumers for the first time. Responsible for the event concept, in addition to Anita Tillmann, Jörg Arntz and the PREMIUM GROUP - team, is B2C expert Kai Zollhöfer, who already helped to make the Bread & Butter by Zalando a crowd puller.

“THE GROUND is a B2C festival aimed at a young, purpose-driven generation. This new generation has a strong stance on current social and environmental challenges and expects brands to reflect them. The overriding topics at THE GROUND are therefore sustainability, diversity and equality”, says Kai Zollhöfer.

“A  large  number  of  customers  are  interested  in  more  sustainable  options  -  there  is  a  desire  for  a  more conscious lifestyle, but this trend is currently not yet reflected in their actual shopping behavior. In between lies the so-called attitude-behavior gap, which THE GROUND wants to close further as a platform for brands with transparency and cool communication. We cannot expect that every brand, every consumer is currently doing everything 100% right, but it is the responsibility of all of us to take one small step in the right direction every day. We have to talk openly about how to do this in order to learn from each other so that we can take as many people as possible with us on this journey to a more sustainable future.“

The 3-day experiential marketing playground offers brands the opportunity to interactively exhibit purpose-driven stories and products and connect with consumers. In addition to the focus on fashion, brands from the areas of well-being, beauty, mobility and technology will present innovative products and solutions.

Source:

PREMIUM Exhibitions GmbH

During the first physical Frankfurt Fashion Week in January 2022, PREMIUM GROUP will show more novelties than ever. (c) PREMIUM GROUP
SEEK
06.10.2021

SAVE THE DATE: Frankfurt, January 2022

  • HIGHER, FASTER, FURTHER ! During the first physical Frankfurt Fashion Week in January 2022, PREMIUM GROUP will show more novelties than ever.

The anticipation is rising! With the actual move to Frankfurt in January 2022, Anita Tillmann, Jörg Arntz and the teams will not only present further developed versions of the PREMIUM and SEEK fashion fairs, but will also celebrate a major B2C festival for the first time with THE GROUND.

More than ever, the Berliners‘ passion for people and fashion, but also for business and trading, is at the heart of all their events. And where better to combine all this than in the power metropolis of Frankfurt am Main.

  • HIGHER, FASTER, FURTHER ! During the first physical Frankfurt Fashion Week in January 2022, PREMIUM GROUP will show more novelties than ever.

The anticipation is rising! With the actual move to Frankfurt in January 2022, Anita Tillmann, Jörg Arntz and the teams will not only present further developed versions of the PREMIUM and SEEK fashion fairs, but will also celebrate a major B2C festival for the first time with THE GROUND.

More than ever, the Berliners‘ passion for people and fashion, but also for business and trading, is at the heart of all their events. And where better to combine all this than in the power metropolis of Frankfurt am Main.

„No city in Germany - no city in Europe - stands for business relevance and trading power as much as Frankfurt am Main,“ explains Tillmann. „We now have a unique opportunity to actively shape the future together. PREMIUM GROUP provides the industry with the platform, the brands with the creative content. In addition, we do what we do best, introduce the right players to each other and connect them. We bring together the movers and shakers who have the same drive as we do. With this new mix of location, entertainment, creative industry and trading focus, we are creating a unique momentum after the pandemic - January is when the big deals are made and the c ourse is set for the future.“

To achieve this goal, the PREMIUM GROUP teams have also given the proven successful formats PREMIUM and SEEK a new coat of paint. More space, new areas and shorter distances provide visitors with a completely new trade event experience. Trends, brands and events can be discovered together with new and well-known partners - for the first time all in one place!

And PREMIUM, which is already entering its 19th year in January, is also showing a new side in Frankfurt. Instead of being spread out like in Station-Berlin, in Frankfurt all brands show their collections in one big hall. „We are so excited to finally unite all exhibitors in one hall. This way we create a universe with many different worlds - colorful and exciting,“ says Wiebus. „We are in close exchange with all the protagonists throughout the year and continue to develop the concepts together. The entire industry is positive about coming together in Frankfurt. Everyone is keen to experience and create something completely new! We offer the framework for this - that is our strength.“

And the Berliners have another surprise in store for the Frankfurt debut: With THE GROUND, they are organizing a large fashion festival for young end consumers for the first time. Responsible for the event concept, in addition to Tillmann, Arntz and the PREMIUM GROUP- team, is B2C expert Kai Zollhöfer, who already made the Bread & Butter by Zalando a crowd puller. “THE GROUND is a B2C festival aimed at a young, purpose-driven generation. This new generation has a strong stance on current social and environmental challenges and expects brands to reflect them. The overriding themes at THE GROUND are therefore sustainability, diversity and equality”, said Zollhöfer.

The 3-day event offers brands the opportunity to interactively exhibit purpose-driven stories and products. In addition to the thematic focus on fashion, brands from the fields of wellbeing, beauty, mobility and technology will also present innovative products and solutions.

29.09.2021

The Renewable Materials Conference 2022

  • 10–12 May 2022, Cologne, Germany (hybrid)
  • The unique concept of presenting all renewable material solutions at one event hits the mark: bio-based, CO2-based and recycled are the only alternatives to fossil-based chemicals and materials

Ready-to-use fossil-free sustainable material solutions with a low carbon footprint are in fast-growing demand. Innovative brand owners are keeping an eye out for such solutions, in particular those that will soon reach the mainstream.

  • 10–12 May 2022, Cologne, Germany (hybrid)
  • The unique concept of presenting all renewable material solutions at one event hits the mark: bio-based, CO2-based and recycled are the only alternatives to fossil-based chemicals and materials

Ready-to-use fossil-free sustainable material solutions with a low carbon footprint are in fast-growing demand. Innovative brand owners are keeping an eye out for such solutions, in particular those that will soon reach the mainstream.

For the second time, nova-Institute presents numerous market highlights from bio- and CO2-based chemicals and materials as well as from chemical recycling: All material solutions based on renewable carbon. Together, there is sufficient potential to completely replace petrochemicals by 2050. To tackle climate change at its roots, all additional fossil carbon from the ground must be substituted with renewable alternatives. Over the course of three days, participants will get a comprehensive overview of the latest developments in the renewable material sector, with a focus on industry-ready solutions from a wide spectrum of sustainable raw materials and technologies.

In 2021, the new concept of the Renewable Materials Conference generated an outstanding response, which exceeded all expectations: 420 online participants witnessed a firework of innovations of non-fossil material. 60 speakers, 11 panel discussions, 500 public posts and 1,500 networking activities were proof of the lively exchange during the three conference days.

In 2022, nova-Institute plans to host the conference physically in the heart of Germany's fourth largest city, Cologne, just a few hours away from France, Belgium and the Netherlands. Expected are 400 participants on-site and many more online. On-site, the conference will be accompanied by a large exhibition where companies and institutes can showcase their recent developments. The supporting program, networking activities and many secluded spots at the location offers excellent opportunities to make new business contacts and refresh old ones.

The focus of the conference: All material solutions based on renewable carbon – avoiding the use of additional fossil carbon. The entire spectrum of renewable materials is covered: bio-based, CO2- based and recycled.

The program includes a diverse range of bio-based materials such as bio-based polymers, plastics and biocomposites (first and second generation, biowaste), CO2-based materials (from fossil and biogenic point sources, atmosphere) as well as mechanically and chemically recycled materials.

Source:

nova-Institut GmbH