From the Sector

Reset
60 results
(c) Kornit
17.10.2019

Image Magic Installs Twin Kornit Avalanche Poly Pro Systems for Enhanced DTG Printing

Direct-to-garment system for polyester “is ideal for handling a wide variety of products in small quantities, which should help us attract new customers” says Image Magic CEO

Kornit Digital (Nasdaq: KRNT), announced that Tokyo-based Image Magic has installed two Kornit Avalanche Poly Pro systems, expanding its longstanding digital direct-to-garment capabilities to imprint polyester and poly-blend fabrics. The move supplements Image Magic’s continuous development of internal efficiencies, and increases capacity for an operation that has observed 40% year-over-year growth. The brand serves a mix of corporate clients, including some of Japan’s leading apparel brands, and general consumers via a predominantly internet-based sales model.

Using the eco-friendly NeoPigment™ Olympia ink set, Kornit Avalanche Poly Pro was developed to extend digital design complexity, color gamut, and durability to polyesters, which have grown in popularity as a result of sportswear and “athleisure” trends.

 

Direct-to-garment system for polyester “is ideal for handling a wide variety of products in small quantities, which should help us attract new customers” says Image Magic CEO

Kornit Digital (Nasdaq: KRNT), announced that Tokyo-based Image Magic has installed two Kornit Avalanche Poly Pro systems, expanding its longstanding digital direct-to-garment capabilities to imprint polyester and poly-blend fabrics. The move supplements Image Magic’s continuous development of internal efficiencies, and increases capacity for an operation that has observed 40% year-over-year growth. The brand serves a mix of corporate clients, including some of Japan’s leading apparel brands, and general consumers via a predominantly internet-based sales model.

Using the eco-friendly NeoPigment™ Olympia ink set, Kornit Avalanche Poly Pro was developed to extend digital design complexity, color gamut, and durability to polyesters, which have grown in popularity as a result of sportswear and “athleisure” trends.

 

More information:
Kornit Digital Ltd.
Source:

PR4U

LENZING™ fibers are fully biodegradable in water, soil and compost (c) Lenzing
30.08.2019

LENZING™ fibers are fully biodegradable in water, soil and compost

  • Organic Waste Systems and TÜV confirm fiber biodegradability also in fresh water
  • All white LENZING™ Viscose, Modal and Lyocell fibers are now certified for all environments
  • Global legislators aim at limiting plastic waste persisting in the environment for centuries
  • EU Single-Use Plastics Directive partly regulates usage of plastic products
  • Biodegradable materials such as wood-based fibers are the best alternative to single-use plastics

The Lenzing Group received confirmation of the full biodegradability of its fibers in fresh water by the independent research laboratory Organic Waste Systems (OWS). The new and existing international certifications conducted by OWS and issued by TÜV Austria verify that LENZING™ Viscose fibers, LENZING™ Modal fibers and LENZING™ Lyocell fibers are biodegradable in all natural and industrial environments: in the soil, compost as well as in fresh and in marine water.

  • Organic Waste Systems and TÜV confirm fiber biodegradability also in fresh water
  • All white LENZING™ Viscose, Modal and Lyocell fibers are now certified for all environments
  • Global legislators aim at limiting plastic waste persisting in the environment for centuries
  • EU Single-Use Plastics Directive partly regulates usage of plastic products
  • Biodegradable materials such as wood-based fibers are the best alternative to single-use plastics

The Lenzing Group received confirmation of the full biodegradability of its fibers in fresh water by the independent research laboratory Organic Waste Systems (OWS). The new and existing international certifications conducted by OWS and issued by TÜV Austria verify that LENZING™ Viscose fibers, LENZING™ Modal fibers and LENZING™ Lyocell fibers are biodegradable in all natural and industrial environments: in the soil, compost as well as in fresh and in marine water.

The biodegradability of cellulosic products and the synthetic fiber polyester was tested in fresh water at OWS according to valid international standards, e.g. ISO 14851. At the end of the trial period, LENZING™ wood-based cellulosic fibers, cotton and paper pulp were shown to be fully biodegradable in fresh water in contrast to synthetic polyester fibers. The fact that synthetic materials are not biodegradable leads to major problems in wastewater treatment plants and potentially marine litter. In turn, this not only harms fish and birds living in and close to the oceans but also all marine organisms and us humans.

“The Lenzing Group operates a truly circular business model based on the renewable raw material wood to produce biodegradable fibers returning to nature after use. This complete cycle comprises the starting point of the core value of sustainability embedded in our company strategy sCore TEN and is the ‘raison d’etre’ of our company”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “In living up to this positioning, we not only enhance the business of our suppliers, customers and partners along the value chain but also improve the state of the entire textile and nonwovens industries.”

Both the textile and nonwovens industries face huge challenges with respect to littering. If current trends continue, the oceans could contain more plastic than fish by 2050. Therefore, legislative bodies worldwide can no longer ignore the issue and have moved towards plastics legislation aimed at limiting the vast amount of waste. In response, European lawmakers issued the Single-Use Plastics Directive currently being transposed into national legislation in the EU member states.

Conventional wet wipes and hygiene products mostly contain plastic and were thus identified as one of the product categories to be singled out. Less polluting alternatives are generally encouraged by NGOs and legislators, e.g. products made of biodegradable wood-based cellulosic fibers. Plastic waste including microplastic can persist in the environment for centuries. In contrast, biodegradable materials are the best alternative to single-use plastics because they fully convert back to nature by definition and thus do not require recycling.

Source:

Corporate Communications & Investor Relations
Lenzing Aktiengesellschaft

(c) Messe Frankfurt / Yarn Expo Autumn edition
31.10.2018

Final report: Yarn Expo Autumn wraps up with 501 exhibitors and over 19,000 visitors

More exhibitors than ever joined Yarn Expo Autumn 2018, which was held concurrently with ITMA ASIA + CITME from 15 – 17 October at the National Exhibition Convention Centre (Shanghai). 501 suppliers from 14 countries & regions participated, with new countries to the show including France. This international diversification, as well as strong domestic numbers, demonstrated Yarn Expo’s increasing recognition as a top show in the industry. What’s more, almost 80% of exhibitors were returning from successful past editions, showing their support of the fair.

More exhibitors than ever joined Yarn Expo Autumn 2018, which was held concurrently with ITMA ASIA + CITME from 15 – 17 October at the National Exhibition Convention Centre (Shanghai). 501 suppliers from 14 countries & regions participated, with new countries to the show including France. This international diversification, as well as strong domestic numbers, demonstrated Yarn Expo’s increasing recognition as a top show in the industry. What’s more, almost 80% of exhibitors were returning from successful past editions, showing their support of the fair.

“Although Yarn Expo was unable to be held concurrently with Intertextile Apparel this year, more industry players recognise this fair as a top show for yarn and this is why the turnout remained very strong,” explained Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK). “Our product range was more diverse than ever as exhibitors increasingly see China as the ideal market to introduce their latest innovations. For example, this year we’ve welcomed premium French linen and advanced Italian chemical fibres. Yarn Expo is a platform that promises to gather all of the top suppliers under one roof for genuine buyers.”

With demand rising within the Chinese market for fancy & specialty yarns, suitable for stand-out fashion trends, the trade potential for this product category was high. Business for eco-friendly and natural yarns was also reported to remain steady this edition, reflected by the India Pavilion which increased in size by around 40% this year.

 

Source:

Messe Frankfurt (HK) Ltd

(c) KLULE/Unsplash
Composites offer design freedom and exceptional mechanical properties at low weight for furniture applications
22.10.2018

Composites are opening up new horizons for the furniture industry

What does the furniture market look like and what potential composites offer for the furniture of today and tomorrow? The AZL is investigating this question together with companies from the composite and furniture industry. The result will be an overview of the current market and the materials used to date as well as an outlook on future mass applications for fiber-reinforced plastics (FRP). The study is open to interested companies and starts with a kick-off meeting at Composites Europe in Stuttgart on November 7th, 2018.

Furniture, its design and function have undergone major changes in recent decades: From robust lifelong companions to trend-setting models, from handmade one-of-a-kind pieces to mass products, from storage objects to multi-functional and “smart” all-rounders. This goes along with an increased diversity in terms of design and the materials used – and high potential for composites that offer additional design freedom and exceptional mechanical properties at low weight.

Study provides overview of furniture market and unique selling points of composites

What does the furniture market look like and what potential composites offer for the furniture of today and tomorrow? The AZL is investigating this question together with companies from the composite and furniture industry. The result will be an overview of the current market and the materials used to date as well as an outlook on future mass applications for fiber-reinforced plastics (FRP). The study is open to interested companies and starts with a kick-off meeting at Composites Europe in Stuttgart on November 7th, 2018.

Furniture, its design and function have undergone major changes in recent decades: From robust lifelong companions to trend-setting models, from handmade one-of-a-kind pieces to mass products, from storage objects to multi-functional and “smart” all-rounders. This goes along with an increased diversity in terms of design and the materials used – and high potential for composites that offer additional design freedom and exceptional mechanical properties at low weight.

Study provides overview of furniture market and unique selling points of composites
In order to systematically identify the potential of fiber-reinforced composites and to use them in future furniture applications, the AZL is starting a study together with companies from the furniture and composite industry. Within four and a half months the market for furniture will be segmented, design and technology trends will be identified and the technical requirements for furniture and furniture components will be broken down to identify applications with high potential for composites. The overall goal is to understand the selection process and needs of the furniture designer in order to bring composites to the market as a targeted alternative to conventional materials.

Virginia Bozsak, Technical Manager Composites at ARKEMA Innovative Chemistry is participating in the study: “The ever-growing population number requires environmentally friendly material and a solution for the end of life treatment to recollect and reuse materials. For fast changing markets such as the furniture market, these materials also need to offer an enormous freedom of design. Arkema already answers this demand with the only liquid thermoplastic resin Elium® used as a thermoset resin to produce composite structural or aesthetical parts. With the joint study, we aim to identify specific applications in the furniture market to make use of material which is not limiting creativity or design specifications but rather enabling the future to be revolutionized.”

 

HUNTSMAN and the CHEMOURS Company Expand Longstanding Alliance CHEMOURS & HUNTSMANN
Logos HUNTSMAN and CHEMOURS
12.10.2018

HUNTSMAN and the CHEMOURS Company Expand Longstanding Alliance

  • Huntsman Textile Effects and The Chemours Company FC, LLC (‘Chemours’) have agreed to expand their long-term alliance in the area of durable water repellence (DWR).

Singapore – By combining the strengths of both companies in innovation, technical support and marketing, the expanded co-operation unlocks the full potential of the alliance to develop and deliver new, sustainable DWR solutions and chemistry.  This historical alliance that was established in the early 1990s has been at the forefront of delivering state-of-the-art solutions to the textile industry for durable water repellent effects. In addition to
fluorinated solutions, the expanded alliance will now be able to offer non-fluorinated alternatives as well. The alliance will cover different aspects of the value chain including research, marketing, technical support and manufacturing.

  • Huntsman Textile Effects and The Chemours Company FC, LLC (‘Chemours’) have agreed to expand their long-term alliance in the area of durable water repellence (DWR).

Singapore – By combining the strengths of both companies in innovation, technical support and marketing, the expanded co-operation unlocks the full potential of the alliance to develop and deliver new, sustainable DWR solutions and chemistry.  This historical alliance that was established in the early 1990s has been at the forefront of delivering state-of-the-art solutions to the textile industry for durable water repellent effects. In addition to
fluorinated solutions, the expanded alliance will now be able to offer non-fluorinated alternatives as well. The alliance will cover different aspects of the value chain including research, marketing, technical support and manufacturing.

“Strengthening the partnership between Huntsman Textile Effects and Chemours unlocks the full potential of both companies to shape technology and product offerings in sustainable durable water repellency. Our cooperation, which has stood the test of time, has clearly demonstrated that strong environmental credentials and performance can co-exist in equal measure. We are excited to move forward with a broader alliance as we strengthen our position as the industry leader in DWR textile solutions,” said Jay Naidu, Vice President, Strategic Marketing and Planning, Huntsman Textile Effects.

“Chemours is excited to expand our partnership with Huntsman Textile Effects. This partnership reinforces our commitment to take a leadership role in the innovation and development of more sustainable and high performing products that address the rapidly evolving needs of the textile industry and the consumers that use these products,” said Jesal Chopra, Vice President, Chemours Fluoropolymers.

Together, Huntsman Textile Effects and Chemours have worked to lead the textile industry’s transition  from long-chain water repellent products to more environmentally friendly short-chain chemistry and, more recently, non-fluorinated chemistry. The collaboration has resulted in new, market-leading DWR solutions that deliver on performance and sustainability. Chemours introduced Teflon EcoElite™ with Zelan™ R3 technology in 2015, a renewably sourced, non-fluorinated water repellent finish. Containing 60% plant-based materials* and complying with all key industry standards, Zelan™ R3 repellent offers excellent water repellency and durability while preserving fabric breathability. It meets or exceeds performance levels possible with fluorinated technologies. Teflon™ Eco Dry with Zelan™ R2 PLUS technology, which compliments Teflon EcoElite™, was recently introduced. Zelan™ R2 PLUS contains 30% renewably sourced plant-based raw materials* and is focused on delivering a high level of durable water repellency for all substrates.

In 2017, Huntsman Textile Effects introduced PHOBOTEX® RSY non-fluorinated durable water repellent, which was developed to specifically meet extreme protection, comfort and durability requirements for both synthetic and cellulosic fibers, delivering an enhanced environmental profile for brands. PHOBOTEX® RSY durable water repellent raises the bar in performance on synthetics, allowing brands to offer high-performance weather protection with an assurance of eco-friendly sustainability. Providing effective protection in extreme environments together with breathable comfort, PHOBOTEX® RSY durable water repellent repulses rain, sleet, and snow, ideal for highperformance outerwear fabrics.

Both companies bring a rich and established heritage firmly centered on research and innovation. Through their expanded alliance, joint research and development efforts in DWR enable Huntsman and Chemours to stay at the forefront of industry trends and regulatory changes for a more sustainable textile industry.

More information:
Huntsman Chemours
Source:

Huntsman Textile Effects

Huntsman Textile Effects  (c)Huntsman Textile
UNIVADINE® E3-3D
07.09.2018

Huntsman Textile Effects introduces UNIVADINE® E3-3D

  • Huntsman Textile effects redefines dyeing of polyester including microfiber and blends with UNIVADINE® E3-3D diffusion accelerant
  • Eco-friendly diffusion accelerant provides reproducible, high-speed polyester dyeing

Singapore – Huntsman Textile Effects introduces UNIVADINE® E3-3D next-generation diffusion accelerant to help mills achieve high-performance dyeing of polyester, microfibers and blends in an environment-friendly way that complies with current and anticipated industry sustainability standards.

The demand for polyester and man-made fibers is booming as sports and athleisure apparel markets expand rapidly around the world. At the same time, big-name brands that set trends in the sector continue to increase focus on sustainability and performance. As such, this is putting pressure on mills since the current industry standard involves chemically active diffusion accelerants that contain unwanted chemicals and require additional leveling agents and anti-foaming products that may be hazardous to people and the environment.

  • Huntsman Textile effects redefines dyeing of polyester including microfiber and blends with UNIVADINE® E3-3D diffusion accelerant
  • Eco-friendly diffusion accelerant provides reproducible, high-speed polyester dyeing

Singapore – Huntsman Textile Effects introduces UNIVADINE® E3-3D next-generation diffusion accelerant to help mills achieve high-performance dyeing of polyester, microfibers and blends in an environment-friendly way that complies with current and anticipated industry sustainability standards.

The demand for polyester and man-made fibers is booming as sports and athleisure apparel markets expand rapidly around the world. At the same time, big-name brands that set trends in the sector continue to increase focus on sustainability and performance. As such, this is putting pressure on mills since the current industry standard involves chemically active diffusion accelerants that contain unwanted chemicals and require additional leveling agents and anti-foaming products that may be hazardous to people and the environment.

Developed by Huntsman Textile Effects specifically to meet these challenges, UNIVADINE® E3-3D diffusion accelerant is low-odor, free of benzyl benzoate and other hazardous substances. Part of Huntsman’s range of innovative dyEvolution™ dyeing auxiliaries, it uses Huntsman’s Active Diffusion Technology to enable high-speed dyeing with best-in-class leveling, retarding and migration properties.

“UNIVADINE® E3-3D diffusion accelerant delivers across three key dimensions – diffusion, leveling and migration – for exceptional performance and environmental and economic sustainability. Its environmental credentials offer mills greater processing flexibility and an optimum price-performance ratio,” said Kerim Oner, Global Marketing Manager for Dyeing Auxiliaries at Huntsman Textile Effects. “We expect this latest offering to change the way that the industry dyes polyester and blends while meeting stringent environmental standards.”

UNIVADINE® E3-3D diffusion accelerant has a high affinity to polyester, causing the fiber to swell and increasing the diffusion of the disperse dye, even at lower temperatures. Multiple leveling mechanisms then slow down the exhaustion rate to ensure safe, defect-free dyeing. Finally, as the dye bath heats up, the product’s strong support for disperse dye migration ensures the dye molecules are evenly absorbed.

As a result of this cutting-edge diffusion technology, UNIVADINE® E3-3D diffusion accelerant can be used to successfully dye polyester fibers in tightly wound or high-density yarn/beam dyeing and is suitable for jet applications without the need for anti-foaming products. Reducing exposure to high heat, its Active Diffusion Technology minimizes the potential to damage the elastane in polyester-elastane blends and provides for on-tone dyeing of microfibers. The superior migration support of UNIVADINE® E3-3D diffusion accelerant also increases reproducibility, allowing mills to dispense with additional leveling agents. Polyester, microfibers and blends treated with UNIVADINE® E3-3D diffusion accelerant comply with the requirements of bluesign®, in addition to being suitable for Standard 100 by OEKO-TEX® and an approved input dyeing auxiliary chemical for GOTS (Global Organic Textile Standard) certified textile products*.

Source:

Huntsman Textile Effects

28.08.2018

480 international exhibitors ready for Cinte Techtextil 2018

Cinte Techtextil China opens its doors next week, with around 480 exhibitors from 22 countries and regions preparing for another successful showcase of the world’s leading textile innovations. Leading international and domestic brands will feature in halls N1 – N3 at Shanghai New International Expo Centre from 4 – 6 September, making Cinte Techtextil the ideal place to make connections and gain insight into Chinese and Asian market trends.

The technical textile industry in the Asia region, and China in particular, has been growing steadily and is predicted to continue doing so. China’s total output of technical textiles and nonwoven products is estimated to account for 30% of global production by 2020, and double that of 2013. This high potential for growth, achieved through investments worth billions of dollars, has drawn attention from European exhibitors, who are set to travel to the region for Cinte Techtextil.

Cinte Techtextil China opens its doors next week, with around 480 exhibitors from 22 countries and regions preparing for another successful showcase of the world’s leading textile innovations. Leading international and domestic brands will feature in halls N1 – N3 at Shanghai New International Expo Centre from 4 – 6 September, making Cinte Techtextil the ideal place to make connections and gain insight into Chinese and Asian market trends.

The technical textile industry in the Asia region, and China in particular, has been growing steadily and is predicted to continue doing so. China’s total output of technical textiles and nonwoven products is estimated to account for 30% of global production by 2020, and double that of 2013. This high potential for growth, achieved through investments worth billions of dollars, has drawn attention from European exhibitors, who are set to travel to the region for Cinte Techtextil.

This year’s European Zone will feature around 30 exhibitors from countries including Austria, France, the Netherlands, Sweden, Switzerland and the UK, while further exhibitors can be found in national pavilions from Belgium, Germany and Italy. In addition to this, the Czech Republic will present its debut pavilion, showcasing exhibitors with solutions for technical yarn, fabric processing and nonwoven fabrics.

In addition to this, exhibitors from 12 more countries and regions will present their latest innovations to the market. These include domestic and international exhibitors from China, Hong Kong, India, Indonesia, Israel, Japan, Korea, Saudi Arabia, Taiwan, Thailand, Turkey and the US.

Belt and Road: a success story for Buildtech
Following higher regulations and quality standards that aim to exceed Western levels, demand is high in China for production machinery. What’s more, with the national nonwovens market displaying particularly fast growth, Cinte Techtextil has attracted some of the world’s leading nonwoven and weaving machinery brands.

The fair will showcase leading global exhibitors across 12 application areas. Two areas to watch out for include Buildtech and Mobiltech, which are both performing well in Asia and specifically in China. The Belt and Road initiative brings Buildtech a great deal of benefits through China’s enormous investments in global infrastructure. Adding to this, China’s automobile production has been increasing 3% year-on-year, with particularly high growth seen in new-energy vehicles, SUVs and commercial vehicles. China has become the world’s largest auto producer, and this has been boosting progress in the Mobiltech category.

Cinte Techtextil fringe programme a hub of industry insight
A comprehensive fringe programme will keep Cinte Techtextil fairgoers up to date with industry news, with standout events including the 7th China International Nonwovens Conference. Focusing on the global nonwovens industry, topic highlights include the latest innovations in China’s nonwovens industry, an insight into the North American nonwovens market, future trends in the global hygiene product market, and more. The conference will also discuss innovations and developments in filter materials and the wipe industry.

The first day of the fringe programme will see a panel discussion in hall N1, moderated by the Taiwan Technical Textiles Association (TTTA), with confirmed panellists including DuPont, IBENA Textilwerke and SGS-CSTC Standards Technical Services. The panel will focus on current trends, developments and standards in the protective textile industry.

Other fringe programme events will include seminars and product presentations led by industry leaders on the latest global technologies and market trends, and an Innovation Showcase Area in a variety of application categories. 

More information:
Cinte Techtextil China
Source:

Messe Frankfurt (HK) Ltd

Foto: (c) GS1 Germany
Der Trendradar 2018: Technologie-Trends verändern die Konsumgüterbranche rasant
05.07.2018

Bessere Kundenansprache durch Künstliche Intelligenz?

„Algorithmen übernehmen die Aufgaben von Marketing-Mitarbeitern“ – mit dieser Schlagzeile wurden kürzlich Umstrukturierungsmaßnahmen beim Onlinehändler Zalando kommentiert. Tatsächlich setzt das Berliner E-Commerce-Unternehmen bei seinen Marketingaktivitäten zukünftig stärker auf Künstliche Intelligenz. Ziel ist dabei, das Kauf- und Klickverhalten der Kunden noch schneller und genauer zu analysieren, um ihnen individuellere und passgenaue Angebote machen zu können. Werbemails oder Push-Nachrichten, die bisher von Marketing-Mitarbeitern gestaltet und versendet wurden, werden dann von Algorithmen oder Künstlicher Intelligenz gesteuert.

Die Neuausrichtung des Marketings macht deutlich: Künstliche Intelligenz ist längst kein Science-Fiction-Szenario mehr, sondern beeinflusst schon heute ganz konkret die Bedingungen in der Konsumgüterbranche. Weitere Beispiele für aktuelle Anwendungsgebiete sind selbstfahrende Autos oder kassenloses Bezahlen, wie es seit kurzem von Elektronikhändler Saturn in seinem Innsbrucker Store Saturn Express getestet wird.

„Algorithmen übernehmen die Aufgaben von Marketing-Mitarbeitern“ – mit dieser Schlagzeile wurden kürzlich Umstrukturierungsmaßnahmen beim Onlinehändler Zalando kommentiert. Tatsächlich setzt das Berliner E-Commerce-Unternehmen bei seinen Marketingaktivitäten zukünftig stärker auf Künstliche Intelligenz. Ziel ist dabei, das Kauf- und Klickverhalten der Kunden noch schneller und genauer zu analysieren, um ihnen individuellere und passgenaue Angebote machen zu können. Werbemails oder Push-Nachrichten, die bisher von Marketing-Mitarbeitern gestaltet und versendet wurden, werden dann von Algorithmen oder Künstlicher Intelligenz gesteuert.

Die Neuausrichtung des Marketings macht deutlich: Künstliche Intelligenz ist längst kein Science-Fiction-Szenario mehr, sondern beeinflusst schon heute ganz konkret die Bedingungen in der Konsumgüterbranche. Weitere Beispiele für aktuelle Anwendungsgebiete sind selbstfahrende Autos oder kassenloses Bezahlen, wie es seit kurzem von Elektronikhändler Saturn in seinem Innsbrucker Store Saturn Express getestet wird.

Der von GS1 Germany initiierte Expertenkreis Innovation bestätigt, dass Künstliche Intelligenz zu den wichtigsten Technologie-Trends in den kommenden Jahren gehört. Hintergrundinformationen sowie Handlungsempfehlungen für Unternehmen sind in dem neuen Trendradar 2018 nachzulesen, der ab sofort zum kostenfreien Download auf der Website des Kölner Unternehmens zur Verfügung steht. Der Trendradar soll als Frühwarnsystem dienen und beantwortet konkret, welche aktuellen Entwicklungen tatsächlich relevant sind und frühzeitig strategische Entscheidungen in den Unternehmen der Konsumgüterbranche erfordern.

Die wichtigsten Trends: von Blockchain über kassenloses Bezahlen bis Virtual Reality
Das Expertengremium mit Vertretern aus Handel, Industrie, IT, Logistik, von Start-ups und aus der Wissenschaft hat in mehreren Workshops aus einem Gesamt-Pool von 120 innovativen Themen die zehn wichtigsten Technologie-Trends identifiziert, die in den nächsten drei Jahren ihr disruptives Potenzial entfalten werden und mit echtem Mehrwert für die Endkunden verbunden sind. Neben Künstlicher Intelligenz definierten sie autonomes Fahren, Blockchain, Cyber Security, E-Commerce im Frischebereich, erweiterte und virtuelle Realität, kassenloses Bezahlen, Plattform-Ökonomie, unsichtbare Identifier und virtuelle Regale als wichtigste Entwicklungen für die Branche.

„Trends frühzeitig erkennen, neutral bewerten, Erkenntnisse teilen und damit ein Innovations-Frühwarnsystem für unsere Community etablieren - das ist der Anspruch, den wir mit unserem Trendradar erfüllen möchten“, erklärt Regina Haas-Hamannt, Leiterin Innovation bei GS1 Germany. Der Trendradar bietet zu jedem der zehn Trends eine detaillierte Erläuterung sowie eine Analyse seiner Bedeutung aus Sicht der Shopper und aus der Perspektive von Handel und Industrie. Reale Anwendungsbeispiele zeigen die aktuelle Relevanz auf und Handlungsempfehlungen der Empfehlungen runden die Trendanalyse ab. Darüber hinaus gibt der Trendradar einen Überblick über weitere wichtige Entwicklungen für die Branche.

Source:

GS1 Germany

03.07.2018

Archroma sign partnership with Carlin to promote color inspiration tools in France

Archroma, a global leader in color and specialty chemicals, recently entered in a partnership with Carlin, the world’s very first trend forecasting agency founded in 1947, aiming to promote the use of Archroma’s exclusive color inspiration tools to fashion designers and stylists in France.

Under the terms of the new partnership, Carlin will use the ‘Color Atlas by Archroma®’ color references in the Carlin’s 16 publications per year, including the InMouv trend books. Carlin will also use the Color Atlas during its color workshops, and Carlin and Archroma will organize regular conferences and events for fashion brands in major French cities, including Paris.
The partnership agreement also appoints Carlin as Archroma’s sales agent for its color management products in France, including the Color Atlas by Archroma® color library and related tools. Archroma’s color management services will continue to be sold through the existing channels.

Archroma, a global leader in color and specialty chemicals, recently entered in a partnership with Carlin, the world’s very first trend forecasting agency founded in 1947, aiming to promote the use of Archroma’s exclusive color inspiration tools to fashion designers and stylists in France.

Under the terms of the new partnership, Carlin will use the ‘Color Atlas by Archroma®’ color references in the Carlin’s 16 publications per year, including the InMouv trend books. Carlin will also use the Color Atlas during its color workshops, and Carlin and Archroma will organize regular conferences and events for fashion brands in major French cities, including Paris.
The partnership agreement also appoints Carlin as Archroma’s sales agent for its color management products in France, including the Color Atlas by Archroma® color library and related tools. Archroma’s color management services will continue to be sold through the existing channels.

The Color Atlas by Archroma® uses complementary tools to enhance creative possibilities for designers and brands. It incorporates the six-volume ‘Color Atlas’ Library, with over 4,300 colors on cotton poplin; the two-volume ‘Color Atlas Compact’ for improved portability; and the ‘Color Atlas Online’ which enables you to take an image with your smartphone and identify the closest Color Atlas shades.
“Just like designers, brands, retailers, manufacturers and Carlin, we are passionate about color trends,” explains Chris Hipps, Global Director of Archroma Color Management Services. “We redefined the concept of a color library for the textile industry with our Color Atlas, an essential and inspirational reference that gives creatives options that they had never dreamed of. With our new partnership with Carlin we’ll be able to share our Color Atlas and our passion for color with a new audience.”

“Carlin is at the forefront of trend forecasting,” explains Edouard Keller, Head of International Sales, Carlin. “And that includes the use of color. Archroma offers a suite of services and tools that are both practical and instantly available for our clients; this is what makes their solution so attractive to us. Our partnership with Archroma will empower us to share the advanced Color Atlas and associated tools with creatives throughout France, helping them to unlock their creativity with color.”

 

21st Kenya International Trade Exhibition 2018 (KITE)
21st Kenya International Trade Exhibition 2018 (KITE)
28.06.2018

21st Kenya International Trade Exhibition 2018 (KITE)

Exhibitors from over 30 countries participating at Kenya's Biggest Int'l. Multi-Sector Trade Exhibition

The largest international trade exhibition in Africa for multi-sector products, equipment and machinery will take place at KICC, Nairobi, Kenya from 04 - 06 September with record breaking numbers. Exhibitors and trade visitors are said to increase by 27% and 24% respectively at the 21st edition of the Kenya International Trade Exhibition (KITE). The exhibition has grown in stature from its inception 22 years ago, as the key networking and sourcing platform for the industries. As the largest event of its kind, it ensures direct access to over 150 exhibitors from 30 countries and more than 12,000 trade visitors.

With an amazing array of products and services from all over the world, it gives visitors the opportunity to source cutting edge products and services as well as learn about and discuss the latest market trends. There is no other related trade exhibition in East Africa that delivers the same quality, quantity and variety of buyers and distributors.

Exhibitors from over 30 countries participating at Kenya's Biggest Int'l. Multi-Sector Trade Exhibition

The largest international trade exhibition in Africa for multi-sector products, equipment and machinery will take place at KICC, Nairobi, Kenya from 04 - 06 September with record breaking numbers. Exhibitors and trade visitors are said to increase by 27% and 24% respectively at the 21st edition of the Kenya International Trade Exhibition (KITE). The exhibition has grown in stature from its inception 22 years ago, as the key networking and sourcing platform for the industries. As the largest event of its kind, it ensures direct access to over 150 exhibitors from 30 countries and more than 12,000 trade visitors.

With an amazing array of products and services from all over the world, it gives visitors the opportunity to source cutting edge products and services as well as learn about and discuss the latest market trends. There is no other related trade exhibition in East Africa that delivers the same quality, quantity and variety of buyers and distributors.

Concentrating on some of the largest growth categories within the multi sector industry, Kenya International Trade Exhibition (KITE) 2018 has five distinct sub categories, namely: FOODAGRO, MEDEXPO, PPPEXPO & INDUSMACH which will cover the food, hotel & agricultural sectors, medical & pharmaceuticals, plastic, printing & packaging sector, the industrial and finally the consumer sector. Being centrally located, Kenya emerges as one of the largest importers in Africa. Kenya also has the largest economy in east Africa and is a regional financial and transportation hub.

World's largest automotive interiors supplier adopts Lectra’s agile high-volume fabric-cutting solution (c) Lectra
17.05.2018

World's largest automotive interiors supplier adopts Lectra’s agile high-volume fabric-cutting solution

  • China-based Yanfeng Global Automotive Interiors improves cutting precision with Lectra’s Vector® iX6

Paris – Lectra, the technological partner for companies using fabrics and leather, is pleased to announce that Yanfeng Global Automotive Interiors (YFAI), the world’s largest supplier of vehicle interior components, has adopted the Vector iX6® advanced fabric-cutting solution to stay apace of evolving production needs.

YFAI supplies a broad range of products spanning instrument panels, cockpit systems, door panels, floor consoles and overhead consoles—the majority of which incorporate vinyl and laminated woven fabric pieces.

Growing consumer demand for personalization and customization is contributing to an overall increase in soft trim content in vehicle interior components. The Vector iX6 provided by Lectra is intended to help YFAI increase the capacity and fabric-cutting efficiency of its new vehicle program in Anting.

  • China-based Yanfeng Global Automotive Interiors improves cutting precision with Lectra’s Vector® iX6

Paris – Lectra, the technological partner for companies using fabrics and leather, is pleased to announce that Yanfeng Global Automotive Interiors (YFAI), the world’s largest supplier of vehicle interior components, has adopted the Vector iX6® advanced fabric-cutting solution to stay apace of evolving production needs.

YFAI supplies a broad range of products spanning instrument panels, cockpit systems, door panels, floor consoles and overhead consoles—the majority of which incorporate vinyl and laminated woven fabric pieces.

Growing consumer demand for personalization and customization is contributing to an overall increase in soft trim content in vehicle interior components. The Vector iX6 provided by Lectra is intended to help YFAI increase the capacity and fabric-cutting efficiency of its new vehicle program in Anting.

In the manufacturing of vehicle interiors, cutting level precision is of the utmost importance because pieces must fit into door panel designs with a high degree of accuracy. Equipped with a special cutting blade, Vector iX6’s ultra-precise cutting improves material utilization by minimizing buffer between parts. The solution’s superior cutting control software and high-frequency vibration cutting also enable a considerable improvement in productivity.

“As vehicle interior designs become increasingly complex, process requirements change accordingly,” remarks Guan Qinghua, Director, Advanced Manufacturing Engineering, YFAI. “The ability to achieve greater productivity and precision for the smaller fabric and vinyl pieces becomes particularly critical. Lectra’s Vector iX6 satisfies this need while also improving fabric utilization and cutting efficiency.”

“Understanding evolving market trends lies at the heart of what we do,” states Javier Garcia, Senior Vice-President, Automotive Sales, Lectra. “Since its launch, Vector iX6 has been quickly adopted by interior component suppliers like YFAI. VectorAuto iX6 contributes to a drastic reduction in the manufacturing cost per set, especially for small parts produced using vinyl and other materials complex to cut.

Source:

Lectra Headquarters / Press Department

07.05.2018

Clariant showcases support for North America’s plastics industry growth

  • Additives, pigments and masterbatches for transportation, packaging, textiles & fibers
  • Support to “future-proof” medical applications
  • Contributing towards more sustainable engineering plastics

Clariant, a world leader in specialty chemicals, turns the spotlight on its increasing on-the-ground support and innovation focus for North America’s four key plastics application segments at NPE 2018 Booth S18155.

Clariant is pushing forward with plans for growth in the region by advancing R&D competencies, and increasing its manufacturing footprint and technical capabilities across its 50+ sites, 3 R&D and 6 technical innovation centers. Clariant’s innovations for the plastics industry include advanced additives, masterbatches and pigments which support the packaging sector in engaging consumers via differentiated, convenient solutions. At NPE, it will also highlight solutions for enhancing and protecting healthcare products, as well as its contribution to stronger and colorful textiles and fibers for everything from e-mobility to industrial applications.

  • Additives, pigments and masterbatches for transportation, packaging, textiles & fibers
  • Support to “future-proof” medical applications
  • Contributing towards more sustainable engineering plastics

Clariant, a world leader in specialty chemicals, turns the spotlight on its increasing on-the-ground support and innovation focus for North America’s four key plastics application segments at NPE 2018 Booth S18155.

Clariant is pushing forward with plans for growth in the region by advancing R&D competencies, and increasing its manufacturing footprint and technical capabilities across its 50+ sites, 3 R&D and 6 technical innovation centers. Clariant’s innovations for the plastics industry include advanced additives, masterbatches and pigments which support the packaging sector in engaging consumers via differentiated, convenient solutions. At NPE, it will also highlight solutions for enhancing and protecting healthcare products, as well as its contribution to stronger and colorful textiles and fibers for everything from e-mobility to industrial applications.

Deepak Parikh, president of region North America, Clariant comments: “Clariant’s product innovation for the US and wider North American plastics industry embraces the region’s fastest growing end-use areas of automotive and construction. It also addresses the impact of trends driven by changing consumer lifestyle preferences and market regulations on other important segments such as packaging and healthcare.”

Transportation
Clariant brings color and protection to support the increasing use of engineering plastics and high temperture resins in automotive interiors, exteriors and under-the-hood. Halogen-free Exolit® OP 1400 provides outstanding flame retardancy to polyamide parts, enhances safety with UL 94 V0 performance down to 0.4 mm and enables the molding of complex parts with no mold deposits and blooming. Exolit OP 1400 has been awarded the Clariant EcoTain®label for outstanding sustainability and performance. At the same time, Clariant offers low-halogen controlled high-performance PV Fast® pigmentswith excellent migration and weather fastness properties to meet the high requirements of today’s transportation and automotive industry. Easy processing Renol® compounds and masterbatches for engineering and high temperature resins provide heat and light stability, and flame retardancy, while maintaining critical flow properties in parts like SMT connectors. Importantly, they are available as small lots which enables customers to purchase only what they require and contribute to a reduction in their carbon footprint.

Packaging
As US packaging manufacturers explore more consumer-friendly, lighterweight and appealing solutions, Clariant is on hand to support their functionality, sustainability-related and color desires. Clariant Pigments has an innovative cooperation with Konica Minolta and matchmycolor to enable fast, precise and efficient color matching of HDPE products, using select organic PV Fast and Graphtol® pigments that comply with FDA regulations. The ColorWorks®center in Chicago is dedicated to US brand managers and designers with teams of color design experts to create color formulations faster than ever before for bottles, caps, closures and films.

According to market reports, plastic pouches are gaining share from traditional pack types in packaged food and are mainstream in home care. To support smoother and more environmentally-compatible processing especially for film applications, Clariant offers an FDA-compliant, vegetable-based powder amide wax, Licolub® FA 1, which acts as a slip and anti-block agent. It is suitable for polyolefins and PVC.

Textiles & Fiber
At NPE 2018, Clariant puts the focus on strong and colorful textiles, carpets and industrial fibers. New AddWorks® TFB 117 offers a number of benefits to help stabilize and smoothen fiber production processes, protect color, and improve heat stability and mechanical properties of fibers. AddWorks TFB 117 ensures smooth spinnability with less filaments breakage, even at low processing temperatures and at high speed spinning up to 5,500 m/min. Clariant also offers a broad range of colorants for polypropylene, polyester, polyamide and acrylic fibers, featuring migration fastness, chemical stability, light- and weather-fastness.

Healthcare
Clariant supports risk control and regulatory compliance for medical polymer and pharmaceutical packaging solutions. Its Mevopur® color and performance masterbatches and compounds include a USP Class 6 line of compliant products and multiple global ISO, 87, 88, and 661.1 certifications ahead of the market deadline. Clariant also offers selected FDA-compliant organic pigments and polymer soluble dyes that meet purity migration fastness as well as toxicological properties for medical devices and pharmaceutical packaging.

02.05.2018

Demand for European technical textiles attracts leading companies to Cinte Techtextil China

Exhibitors from eight countries have already confirmed to participate in the fair’s European Zone. They join an expected 500-plus total exhibitors from around the world. The 2018 edition of this biennial fair takes place from 4 – 6 September in halls N1 – N3 of the Shanghai New International Expo Centre.

While China retains its edge in terms of technical textiles and nonwovens production capabilities, in the eyes of Chinese buyers, European suppliers are still the leaders when it comes to technology and innovation. This was widely reported by European exhibitors at the previous edition in 2016 of Asia’s leading biennial trade event for the industry: Cinte Techtextil China.

Exhibitors from eight countries have already confirmed to participate in the fair’s European Zone. They join an expected 500-plus total exhibitors from around the world. The 2018 edition of this biennial fair takes place from 4 – 6 September in halls N1 – N3 of the Shanghai New International Expo Centre.

While China retains its edge in terms of technical textiles and nonwovens production capabilities, in the eyes of Chinese buyers, European suppliers are still the leaders when it comes to technology and innovation. This was widely reported by European exhibitors at the previous edition in 2016 of Asia’s leading biennial trade event for the industry: Cinte Techtextil China.

“In the Chinese market, buyers want good quality products, so overseas companies, and products with recognised quality certifications, have a lot of potential,” Ms Ping Chen, General Manager of IBENA Shanghai Technical Textiles commented. “As a leading German company in the industry, our products are welcomed by many buyers at this fair. It is also important to be in the German Pavilion as this signals to buyers that we have quality products, and it attracts more attention.” Swiss firm Sanitized AG had the same experience. “As a Swiss company in the European Zone I believe it’s an advantage, as some local buyers have more confidence towards imported products,” Mr Steven Liu, Sales Manager said.

Other exhibitors commented on the long-term trends in the Chinese market. “There’s a definite shift to more high-quality machinery in China that isn’t affected by what’s happening in the overall economy. Moreover, there are opportunities for overseas suppliers as there is still a gap between us and what Chinese companies produce,” Dr Joachim Binnig, Vice President, Head of Development & Technology, Autefa Solutions Germany GmbH explained.

Mr Roger Zhang, Sales Manager for German firm J.H. Ziegler Nonwovens and New Materials commented: “Our products are mainly for high-end Chinese customers, such as BMW and Audi. The Chinese market has gradually matured, but the production capability for high-performance products which are energy efficient and eco-friendly is still developing, so there is a lot of space for overseas brands to develop here.”

European Zone highlights
This year’s European Zone will feature around 30 exhibitors from eight countries, including Austria, Belgium, the Czech Republic, France, Italy, the Netherlands, Sweden, Switzerland and the UK, while further exhibitors can be found in national pavilions from Belgium, the Czech Republic, Germany and Italy. Some of the exhibitor highlights in the European Zone include:

  • Arkema (France): with brands including PMMA Altuglas, Rilsan, Pebax, Kynar PVDF and Bostik, they will present polymer resin for fibres and yarns, which apply to a wide range of applications, at the fair.
  • Dakota Coating (Belgium): specialists in thermoplastic and thermosetting adhesives, their polymer products, based on polyethylene, polyolefin or mixtures, ethylene vinyl acetates, co-polyamides, polyurethanes and co-polyesters, are suitable for automotive, building, heat transfer and sound insulation uses.
  • Lenzing Plastics (Austria): a new exhibitor at the fair, they are a leading manufacturer of polyolefin and fluoropolymer products, such as Thermoplast and PTFE products. One of their core competencies lies in the monoaxial stretching of films and filaments, and they offer special solutions in the fields of construction & insulation, medicine & hygiene, packaging and cables, as well as automotive and technical textiles. They will highlight their PROFILEN® PTFE product at the fair, and with its extreme durability and very smooth surface, it is highly valued in many niche applications in the technical and medical sectors.
  • Protechnic (France): leading manufacturers of hot-melt adhesives and plastic printed films, they will showcase hot melt thermo-adhesive nets, webs and films at the fair.
  • Trelleborg Coated Systems (Italy): another new exhibitor this edition, they produce high-performance, engineered coated fabrics. They offer a wide variety of substrates – from Kevlar® to silk – with a choice of weaving methods.
19.03.2018

World first ROICA™ premium sustainable stretch fiber got prestigious Senken Shimbun “Synthetic Fiber Prize”

Asahi Kasei ROICA™ premium stretch fibre has received the prestigious Senken Shimbun Synthetic Fiber Prize with the sustainable GRS certified yarn.
ROICA™ specialties captured the attention of Senken Shimbun, a daily Japanese fashion newspaper, based in Tokyo, Japan.  Founded in 1956, today provides news, research data and new business ideas, and has a great influence over the fashion business in Japan. It helps fashion products throughout Japan to be distributed in Japan's domestic market, and serves as a platform targeting overseas markets.
The award is limited to Japanese companies. This year ROICA™ GRS certified yarn was selected in the Sustainable category thanks to its unique sustainable characteristics.

Asahi Kasei ROICA™ premium stretch fibre has received the prestigious Senken Shimbun Synthetic Fiber Prize with the sustainable GRS certified yarn.
ROICA™ specialties captured the attention of Senken Shimbun, a daily Japanese fashion newspaper, based in Tokyo, Japan.  Founded in 1956, today provides news, research data and new business ideas, and has a great influence over the fashion business in Japan. It helps fashion products throughout Japan to be distributed in Japan's domestic market, and serves as a platform targeting overseas markets.
The award is limited to Japanese companies. This year ROICA™ GRS certified yarn was selected in the Sustainable category thanks to its unique sustainable characteristics.

On March 14th, 2018 Senken Shimbun organized an event to conferee the awards and in this occasion ROICA™ displayed unique fabrics and garments created with this awarded ROICA™ yarn by premium producers as Iluna Group S.p.A (IT), M.I.T.I. (IT), Tessitura Colombo Antonio(IT), Tintex Textiles(PT)  and international top level brands as Cosabella (US), Maloja (DE) and Triumph (CH.
 
MORE DETAILS ABOUT THIS AWARD WINNING PRODUCT
The Senken Award winning ROICA™ yarn is part of the ROICA™ Eco-Smart family, a world-first range of unique innovative and responsible made premium stretch fibers, that today can offer 2 real sustainable solutions. For time, one of the two types was awarded! The ROICA™ yarn certified GRS (Global Recycled Standard by TEXTILE EXCHANGE) version 3 certified yarn with more than 50% pre-consumer recycled content.

Two of the companies above: M.I.T.I. and TINTEX already garnered a huge recognition at ISPO last February also thanks to the uniqueness of this smart ROICA™ yarn:
M.I.T.I. Spa presented at ISPO Green Soul, a new fabric line made with fully recycled fibers. Ten different fabrics belong to this products line whose composition is both polyamide/ROICA™ Eco-Smart family and Polyester/ROICA™ Eco-Smart family offering a 100% recycled fiber warp knitted stretch fabrics. The winning Bluesign certified fabric is called Thermal Green and is a high-end brush back warpknit fabric, made with recycled Polyamide and ROICA™ Eco-Smart family.Tintex Textiles Garnered Its Second ‘ISPO Best Product Award’ In TexTrends in the SOFT EQUIPMENT category with a circular economy centric material, branded B.Cork™, a unique technology that sources certified pre-consumer cork waste.  Following a patent pending hi-tech lamination of a water based, formaldehyde and solvent free coating, a breathable, natural and waterproof supersoft touch is achieved. And last but not least is using ROICA™ Eco-Smart family premium stretch qualities  to fulfil fit and comfort needs.
 
 AWARD WINNING ROICA YARN IN BRANDS COLLECTIONS

  • Maloja, an outdoor speciality brand with its roots in nature and  wellbeing, Maloja is presenting  many lines using ROICA™, and  here we present a new mid layer  technical x-country ski set with  fabrics from MITI, using the GRS  certified yarn part of the ROICA™ Eco- Smart family of responsible Stretch.
     
  • COSABELLA produced by Collezioni SRL: The brand sells in over 100 countries, with a premium collection of 2000 styles for every sector of lingerie and leisurewear. Latest styles use the Eco-Lace by Tessitura Colombo Antonio fabrics made with ROICA™ Eco Smart family for their more luxurious upscaled lines.
     
  • TRIUMPH LINGERIE: whose latest designs use the new stretch lace from ILUNA Group and the GRS certified yarn part of the ROICA™ Eco Smart family, slips and lingerie sets for the Essence by Triumph collection.
More information:
ROICA™ stretch fibre
Source:

GB Network

(c) Messe Frankfurt (HK)
05.03.2018

European suppliers at Intertextile Shanghai the go-to option for Chinese buyers seeking quality and style

  • New collaboration of sustainable viscose suppliers formed in China

Digital Printing Zone debuts at Spring Edition
Despite the economic ups and downs in China over the last few years, demand for premium European textiles remains high.
Whether it be premium wool for the flourishing suiting market, ladieswear fabrics, lace & embroidery for high-end domestic brands each with hundreds of stores across the country, innovative yarns & fabrics for the booming sports and activewear sectors, or original pattern designs for the thousands of new online fashion brands, European suppliers remain the go-to option for Chinese buyers looking for quality and style.

  • New collaboration of sustainable viscose suppliers formed in China

Digital Printing Zone debuts at Spring Edition
Despite the economic ups and downs in China over the last few years, demand for premium European textiles remains high.
Whether it be premium wool for the flourishing suiting market, ladieswear fabrics, lace & embroidery for high-end domestic brands each with hundreds of stores across the country, innovative yarns & fabrics for the booming sports and activewear sectors, or original pattern designs for the thousands of new online fashion brands, European suppliers remain the go-to option for Chinese buyers looking for quality and style.

As one of the undisputed leaders in the European textile scene, Italy is always a good bellwether of the trends between Europe and China. After a less than stellar 2016, Italy’s fabric exports to the Mainland China and Hong Kong markets grew by 12.4% in the first 10 months of 2017[1]. The expected demand for European brands at Intertextile Shanghai Apparel Fabrics will be most evident in the SalonEurope zone, which features exhibitors from Austria, France, Germany, Italy, Spain, Switzerland, Turkey and the UK, as well as country pavilions & zones from France, Germany, Italy and Turkey.

There is also continuing demand for overseas expertise when it comes to more technical areas such as sustainability and digital printing, solutions to which can be found in the fair’s All About Sustainability area and Digital Printing Zone.

SalonEurope showcases the continent’s full textile expertise
The best of the best from Europe will be on display in this edition’s SalonEurope, with a range of products across the whole textile spectrum on offer. Some of the highlights this edition include:

  • Alumo (Switzerland): celebrating its 100-year anniversary this July, Alumo has undertaken a complete refresh of their brand, highlighting the character of their mill in Appenzell, Switzerland that has deep roots in the local textile industry. This edition, they will showcase a renewed collection of luxury shirting fabrics with intricate designs and added functions such as natural stretch and wrinkle-free, and a newly enlarged, never-out-of-stock ‘Sartorial’ collection.
  • Hatfil Tekstil Isletmeleri (Turkey): a Turkish-Italian joint venture, they offer a huge range of yarns including eco-friendly options such as organic, BCI and fair trade yarns, as well as cotton, Tencel, Amicor, bamboo, cashmere, modal and other varieties.
  • Hohenstein Textile Testing (Germany): offering testing services, OEKO-TEX® services and certifications, the Hohenstein Quality Label and more.
  • Ricamificio Paolo Italy SpA (Italy): an embroidery manufacturer, they have developed a new technique using very thin embroideries to produce a lace-like effect, which can also be customised to the customer’s requirements in no more than four weeks. They have also produced a quilt-like fabric suitable for spring / summer garments which is made from materials such as silk organdie, cotton yarn or lurex to produce a shiny effect.
  • Teseo Tessitura Serica Di Olmeda SpA (Italy): for their summer 2019 collection, Teseo is inspired by the natural elements with increased attention to sustainability with GOTS-certified bio silk and eco-friendly yarns. New articles are lighter and enriched with yarn-dyes, include jacquard stripes and checks, gauze and devoré bands to add transparency, and more.

New collaboration of sustainable viscose suppliers formed in China
While the textile industry in China still has a long way to go in terms of sustainability, genuine progress is being made at both a government and company level. January of this year saw the implementation of a new environment protection tax, with companies charged for noise, air & water pollution and generating solid waste[2]. Replacing a pollutant discharge fee that had been in place for 40 years, the new tax is set by local governments – with some of the regions suffering from worse pollution setting higher rates – and also incentivises companies with lower emissions.

In another encouraging move, 10 leading global viscose producers in China have come together to form the Collaboration for Sustainable Development of Viscose (CV) to promote the sustainable sourcing and responsible production of viscose. These 10 producers collectively account for over 50% of the world’s viscose staple fibre production, and have partnered with two trade associations to adopt a sustainability roadmap for the viscose industry. Built around credible international sustainability standards and programmes, the CV Roadmap aims to provide guidance to viscose producers on sustainable sourcing and production practices.

The CV collaboration will make its debut appearance in the fair’s All About Sustainability zone, where visitors can learn more about this initiative, as well as sustainable developments in the Chinese textile industry. Apart from an educational programme and garment display area, the zone will also feature a number of exhibitors other than CV.

Digital Printing Zone debuts at Spring Edition
While digital printing is rapidly gaining traction in the global textile industry, this is especially so in China due to its potential to reduce pollution during the production process. Amongst the exhibitors looking to take advantage of this in the fair’s new Digital Printing Zone is MS Italy, a market leader in the design, development and distribution of innovative digital ink-jet printing systems and associated consumables, which serves the high-end, roll-to-roll textile printing and specialty material markets. Also exhibiting is DIGITEX which will introduce the latest digital- and inkjet-printed natural and manmade fabrics.

Apart from digital printing exhibitors, a day-long forum will inform fairgoers on the exciting possibilities of digital printing. Held on day 2 of the fair, the Fast Fashion and Digital Printing Application Forum features sessions on fast fashion technology & trends and digital printing applications. These are followed by a series of discussions on topics such as flexible supply chains, business opportunities created by digital printing and IP protection. The forum also includes a presentation on the findings of a six-month study conducted by Fashion Print, a Chinese publication, for which they visited hundreds of textile companies, printing and dyeing enterprises, as well as their suppliers to produce a research paper on the digital textile printing market and technology.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

  • Intertextile Shanghai Apparel Fabrics – Spring Edition 2018 is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. For more details on this fair, please visit: www.intertextileapparel.com. To find out more about all Messe Frankfurt textile fairs worldwide, please visit: www.texpertise-network.com.

[1] http://hk.fashionnetwork.com/news/Italian-textile-industry-back-on-growth-track-in-2017,944760.html
[2] http://www.fibre2fashion.com/news/textile-news/china-imposes-environment-protection-tax-beginning-jan-1-239965-newsdetails.html

 

Source:

Liam Rodden, Messe Frankfurt (HK)

27.02.2018

JEC GROUP MAKES PARIS THE WORLD’S COMPOSITES CAPITAL

On March 6-8, 2018, Paris will host the largest international trade show for advanced materials: JEC World, which is organized by JEC Group. For three days, more than 43,000 professional visits from some 100+ countries will gather at the world’s most innovative platform for the materials and products that are revolutionizing our century. “One field where France is a global leader is the field of composites!” says JEC Group President and CEO Frédérique MUTEL.

COMPOSITES ARE GOING STRONG
The share of composites in the global economy is growing. The market for these products is worth 83 billion euros, for a volume of 11.23 million metric tons of volume (2017 statistics). Analysts are predicting a steady 5% growth by 2021. From the industrial viewpoint, composites are developing rapidly, with new automated processes for high-volume production.

On March 6-8, 2018, Paris will host the largest international trade show for advanced materials: JEC World, which is organized by JEC Group. For three days, more than 43,000 professional visits from some 100+ countries will gather at the world’s most innovative platform for the materials and products that are revolutionizing our century. “One field where France is a global leader is the field of composites!” says JEC Group President and CEO Frédérique MUTEL.

COMPOSITES ARE GOING STRONG
The share of composites in the global economy is growing. The market for these products is worth 83 billion euros, for a volume of 11.23 million metric tons of volume (2017 statistics). Analysts are predicting a steady 5% growth by 2021. From the industrial viewpoint, composites are developing rapidly, with new automated processes for high-volume production.

INNOVATION IN COMPOSITES
“Innovation is there with the raw materials, such as better-formulated resins (and even recyclable ones like thermoplastics) and higher-performance fibers like carbon, glass and aramid. Moreover, natural materials like starch for matrices and flax, hemp, sisal and bamboo for fibers are being introduced. There is also innovation in the ways composites are being used, and with the creation of completely new things like drones, electronic devices, hydrofoils and flying taxis. Composites are currently making progress everywhere there is a need for low weight and performance. They offer nearly infinite possibilities. These are truly the materials of the century. Designers are adopting them in a broad range of fields like smart cities, infrastructure, networks, transportation, medical devices, sports & leisure and design. Composites materials expand the field of possibilities.” explains Ms. MUTEL.

“MAKE IT REAL” AT THE 2018 JEC WORLD TRADE SHOW
To present the latest trends and innovations, the 2018 JEC World has even more surface area, with 68,000 square meters. The 1,350 exhibitors (from carbon fiber producer to auto builder, from designer to decorator, from research fellow to aircraft manufacturer) will display their latest advances. All stakeholders will be present at the show. JEC World received more than 40,000 professional visits last year, and is expecting 43,000 this year!

THE NEW “MUST” THINGS TO SEE
This year, JEC World will have four planets. Besides the aerospace, automotive and construction planets, there will be a new “Make it real” planet, which gives a preview of designer creations to be exhibited at the Ghent museum starting in October 2018. “We will show the many aspects of composites, and how these materials are being gradually incorporated into everyday objects,” adds Ms. MUTEL.
This year’s JEC World will feature a new “Composite Challenge” program that gives the floor to ten PhD students, who will be given five minutes to pitch their research projects with the help of a single slide. “True to its mission, the JEC Group has set up this new program to share the latest research on composites. But it is not just a way to share the most advanced knowledge, it also helps to bridge the gap between academics and the industry and to identify the industry’s next generation of leaders,” she says.
JEC World will also be the occasion to launch Flax & Hemp Fiber Composites, A Market Reality: The Biobased Solution for the Industry, a new book published by JEC Group on the use of plant-based materials.

KNOWLEDGE & NETWORKING PROGRAMS SUPPORTED BY JEC GROUP
The trade show will host well-known speakers, including Dirk AHLBORN, the CEO of Hyperloop Transportation Technologies, a company that is reinventing transportation with high-speed travel (up to 1,300 km/h, or 808 mph), and Yves ROSSY, aircraft pilot and inventor of the first jet-powered wingpack, with which he is able to reach speeds of up to 300 km/h, or 186 mph. The Startup Booster program will pay tribute to startups, and the JEC Innovation Awards program, to innovations. For the first time, the public will be invited to vote on these two programs!
Six new conferences will also address the latest technical advances that are moving the sector forward, and a Composites in Action program will present live demonstrations throughout the show, in three different places.

More information:
JEC World JEC Group
Source:

Dorothée DAVID & Marion RISCH, AGENCE APOCOPE

Evolution of fashion professions at heart of Lectra’s 8th education congress © Lectra
Industry experts and fashion schools discussing at Lectra's 8th education congress
13.12.2017

Lectra: Evolution of fashion professions at heart of Lectra’s 8th education congress

Lectra brings together partnership schools and industry experts to discuss how changing professions
in fashion are impacting training programs

Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather,
technical textiles and composite materials, recently welcomed partners from the world of
education to the company’s Bordeaux-Cestas campus for its eighth education congress. The
event was dedicated to the mega trends shaping the fashion industry and impacting
professions from design to production.

Over fifty representatives from among the most important fashion schools in Germany, Canada, China,
USA, France, Hong Kong, Italy, The Netherlands, Poland, United Kingdom, Switzerland and Sweden, participated
in this biannual meeting between industry experts and teaching professionals.

Lectra brings together partnership schools and industry experts to discuss how changing professions
in fashion are impacting training programs

Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather,
technical textiles and composite materials, recently welcomed partners from the world of
education to the company’s Bordeaux-Cestas campus for its eighth education congress. The
event was dedicated to the mega trends shaping the fashion industry and impacting
professions from design to production.

Over fifty representatives from among the most important fashion schools in Germany, Canada, China,
USA, France, Hong Kong, Italy, The Netherlands, Poland, United Kingdom, Switzerland and Sweden, participated
in this biannual meeting between industry experts and teaching professionals.

Fashion professions are evolving as companies make their first steps towards Industry 4.0, adopting 3D
and rationalizing the lifecycle management for their collections thanks to PLM. Lectra’s congress enabled
schools to discuss the developing role of designers and patternmakers, and the new elements to be
integrated into training programs.

Lectra illustrated future changes through presentations on design, patternmaking, 3D prototyping, and PLM.
“It is fundamental to bring innovation experts in the industry together with fashion schools, because
students will drive the evolution of this industry,” stated Pascal Denizart, Managing Director of the Centre
européen des textiles innovants (CETI).

Working with schools to design courses which meet the needs of fashion companies has always been at
the heart of Lectra’s education program. During the event, the company presented collaborative
experiences between partner schools and fashion brands, such as the competitions organised by Lectra
with Missoni, Balenciaga, and Armani in Italy, as well as Peacebird in China and JC Penney in the United
States.

In the United Kingdom, Lectra collaborated with COS (H&M group) and the Arts University Bournemouth
(AUB) for a competition centred on the design of a collection with zero waste.
“The process was totally digital, from design to the creation of a virtual prototype in 3D. Our students learnt
to optimize each stage of the process. By leveraging the use of Kaledo®, Modaris® and Diamino®, the
collaborative work between AUB, COS and Lectra is exactly the type of project that enormously motivates
our students. Live briefs developed with leading fashion brands and Lectra offer excellent opportunities
which directly inform industry currency and student employability,” explained Penny Norman, a lecturer at
AUB.

The event also shone the spotlight on China and its major role in the evolution of the fashion industry.
Li Min, Vice-Dean of the fashion and design faculty at Donghua university in Shanghai spoke of the event,
organized by Lectra, which brought together major Chinese companies, experts, and representatives from
the biggest schools in China.

“Exchanges on the impact of the Made in China 2025 plan on the fashion industry can better prepare
students for tomorrow’s professions, where digital and automation will occupy a far more central position
than today,” testified Li Min.

"The fashion industry is evolving so fast that sharing insights and best practices with experts and other
fashion schools has become vital to ensure we offer the best learning experience and technology tools to
our students", said Dr. Trevor J. Little, Professor of Textile and Apparel, Technology and Management in
the College of Textiles at NC State University.

“Lectra’s eighth education congress confirms the company’s commitment to our partner schools. We
shared our analysis of the market, the digitalization of the eco-system, and how Industry 4.0 principles can
be applied to the fashion industry. We also discussed mass customization and the role of PLM. While these
are key subjects for our customers, many schools are only now approaching them. We are preparing
tomorrow, today: Lectra is supporting our customers, and schools to play an essential role,” concludes
Céline Choussy Bedouet, Chief Marketing and Communications Officer, Lectra.

Source:

© Lectra

DyStar and CSI launch their Sustainable Color and Trend magazine ©DyStar
DyStar and CSI launch their Sustainable Color and Trend magazine
18.09.2017

DyStar and CSI launch their Sustainable Color and Trend magazine

As a combined effort of the CSI color team and DyStar’s technical experts, DyStar and CSI are launching the first 2 issues of the Sustainable Color and Trend magazine with Cadira® color palettes.

This new magazine inspires Designers and Color Managers by offering palettes and color combinations that are Eco-friendly and Inspired by Nature. Not only does the magazine include a wide range of color palettes, but also color validation in CSI’s Relative Color Popularity (RCP) information as well as sustainable dye recipes that have been formulated based on the Cadira resource optimization process.

The Cadira Concept is a module in DyStar’s Resource Efficiency program. It helps to considerably shorten lead times and reduce water, waste and energy consumption. Cadira Concepts have been developed for different substrates and dyeing procedures. This launch focuses on both reactive dyeing of cotton as well as polyester & recycled polyester dyeing.

As a combined effort of the CSI color team and DyStar’s technical experts, DyStar and CSI are launching the first 2 issues of the Sustainable Color and Trend magazine with Cadira® color palettes.

This new magazine inspires Designers and Color Managers by offering palettes and color combinations that are Eco-friendly and Inspired by Nature. Not only does the magazine include a wide range of color palettes, but also color validation in CSI’s Relative Color Popularity (RCP) information as well as sustainable dye recipes that have been formulated based on the Cadira resource optimization process.

The Cadira Concept is a module in DyStar’s Resource Efficiency program. It helps to considerably shorten lead times and reduce water, waste and energy consumption. Cadira Concepts have been developed for different substrates and dyeing procedures. This launch focuses on both reactive dyeing of cotton as well as polyester & recycled polyester dyeing.

The reactive-issue – Inspired by Nature – offers color palettes with softer, muted tones, levels of neutrals and earthy shades of green. The recipes are based on DyStar Levafix® and Remazol® combined with Sera® chemicals for an optimized dyeing and wash-off process.

The Polyester issue offers more vibrant color options with saturated colors and brights for active wear and outdoor clothing and accessories. The recipes are based on Dianix® dyes and the dyeing process can be optimized by use of the Optidye® PES program.

“We are conscious about our environment so we wanted to create a magazine with an ecological color and optimized processes so that our customers can pick the right color that will help them reduce their environmental impact in the design process.” Says Ron Pedemonte, VP of Sales and Marketing Americas.

CSI will fcus more on color palettes with ecological dyes and low impact processes when offering color and trend information to customers in the future. More eco-friendly color palettes will be available very soon.

More information about CSI color trends and the Cadira process is available in the DyStar Website and CSI Website. www.dystar.com / www.csicolors.com

Source:

DyStar Press Info

Green products to be centre stage at October’s Yarn Expo Autumn ©Messe Frankfurt
Logo Yarn Expo
08.09.2017

Green products to be centre stage at October’s Yarn Expo Autumn

  • Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products
  • Six special display zones cater to latest industry trends

Green products continue to be sought after more and more by consumers nowadays, and textiles are no exception. In order to promote sustainable development throughout the industry, a number of yarn and fibre manufacturers have endeavoured to introduce green products into the early stages of textile production, and Yarn Expo, as the leading yarn and fibre business platform in Asia, serves as an ideal stage for these suppliers to gain exposure to buyers looking for such products.

Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products

  • Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products
  • Six special display zones cater to latest industry trends

Green products continue to be sought after more and more by consumers nowadays, and textiles are no exception. In order to promote sustainable development throughout the industry, a number of yarn and fibre manufacturers have endeavoured to introduce green products into the early stages of textile production, and Yarn Expo, as the leading yarn and fibre business platform in Asia, serves as an ideal stage for these suppliers to gain exposure to buyers looking for such products.

Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products

Amongst a record number of exhibitors at this October’s Yarn Expo Autumn, the debut BCI Pavilion as well as the Sateri Pavilion and Birla Planet Pavilion that include eco-friendly products are certainly amongst the highlights this year. Better Cotton Initiative (BCI) is a global organisation with more than 1,000 members including spinners, weavers and garment manufacturers throughout the entire cotton sector. It aims to promote sustainable cotton production, benefiting workers, customers and the environment as a whole. They will form the BCI Pavilion in Yarn Expo for the first time, with five spinners showcasing their cotton yarn manufactured with eco-friendly cotton.

Sateri is a well-known brand in China which specialises in viscose rayon. This natural and high-quality fibre is made from trees grown on renewable plantations. They are the largest producer of viscose fibre in China with three mills and an annual capacity of 550,000 tons, and also have Oeko-Tex certification. This October, nine other domestic exhibitors will form the Sateri Pavilion to demonstrate their comfortable textiles and skin-friendly hygiene products made from viscose fibre.

With over 50 years of experience in manufacturing cellulosic fibres, Birla Group strives to provide greener, purer and safer products to its customers. The Group has operated in China for three years now, and values Yarn Expo’s effectiveness in helping them to promote their brand and attract a wide range of buyers. “We managed to get connected with a number of downstream buyers at the fair. We have introduced our company and products to them that there is great chance for future cooperation.” said Mr Peter Dong, Senior Manager of Aditya Birla Group.   Coming back this year, the Birla Planet Pavilion will feature three of their highlighted fibres – Birla Viscose, Birla Modal and Birla Spunshades at the fair.

Six special display zones cater to latest industry trends

The textile industry in China is undergoing a structural change with keen competition, so domestic suppliers have to develop innovative and quality products to satisfy the ever-changing markets. To match the specific needs of various buyers, Yarn Expo has established six distinct display zones gathering the leading domestic companies, namely Colourful Chemical Zone, Natural Cotton Yarn Zone, Fancy Yarn Zone, Quality Wool Zone, Green Linen Zone and e-Commerce Zone.

Not only are a number of chemical fibre products with innovative, eco-friendly and health & comfort properties on offer from exhibitors, but visitors can also gain insights into product trends in these areas from the 2017/18 China Fibre Trend Area and Innovative Textile Material Forum, both of which feature in the Colourful Chemical Zone. The Natural Cotton Yarn Zone is another highlight of the three-day show, where exhibitors will showcase their natural cotton yarn and a range of functional products. Around 50 suppliers will also showcase their latest collections in the expanded Fancy Yarn Zone.
In response to the strong demand for fibre and yarn products in China and the Asian region, the coming autumn edition of Yarn Expo will double its exhibition space, and will accommodate around 500 global yarn suppliers from 13 countries and regions. Together with Yarn Expo Autumn 2017, three other textile trade fairs are held concurrently from 11 – 13 October in the same venue: Intertextile Shanghai Apparel Fabrics – Autumn Edition, PH Value and the China International Fashion Fair (CHIC).

Yarn Expo Autumn is organised by Messe Frankfurt (HK) Ltd; The Sub-Council of Textile Industry, CCPIT; China Cotton Textile Association; China Wool Textile Association; China Chemical Fiber Association; China Bast & Leaf Fibres Textiles Association; and China Textile Information Centre.

Lectra Fashion PLM 4.0 Source: www.lectra.com.
Lectra Fashion PLM 4.0
07.06.2017

The new Lectra Fashion PLM gears fashion companies up for the fourth industrial revolution

With digitalization transforming the way consumers shop, today’s fashion companies are playing a neverending game of catch-up, as they compete for the attention of a generation of connected, fickle-minded millennials who want it all: personalization, sustainability, quality and speed, accessible at all times, across multiple channels, and at the lowest price. Industry 4.0 is not only revolutionizing how manufacturers operate, but also how brands and retailers need to function, if they want to be fast and agile enough to meet the needs of this demanding new consumer. The stakes are high and how effectively companies harness technology to put the consumer at the heart of their process will be the deciding factor in who comes out ahead and who gets left behind.

With digitalization transforming the way consumers shop, today’s fashion companies are playing a neverending game of catch-up, as they compete for the attention of a generation of connected, fickle-minded millennials who want it all: personalization, sustainability, quality and speed, accessible at all times, across multiple channels, and at the lowest price. Industry 4.0 is not only revolutionizing how manufacturers operate, but also how brands and retailers need to function, if they want to be fast and agile enough to meet the needs of this demanding new consumer. The stakes are high and how effectively companies harness technology to put the consumer at the heart of their process will be the deciding factor in who comes out ahead and who gets left behind.



Lectra Fashion PLM 4.0 has undergone a drastic reboot to give fashion and apparel companies the speed and agility they need to tackle the challenges of Industry 4.0 head on. Lectra Fashion PLM 4.0, with the widest functional scope on the market, acts as an intelligent nerve center to the digital supply chain, from planning through design to production. This ensures a consistent flow of error-free data between processes, technologies and people. The system connects CAD, industry-standard software such as Adobe Illustrator, company IT systems (such as ERP) and external suppliers, so that actors across the supply chain can work on, save and share information on the platform, ensuring data integrity.
The solution also draws on best practices, fashion-business intelligence and real-world scenarios to automate administrative and repetitive tasks, with templates, standard libraries and shortcuts that allows more time for value-added activities. The final result is a fast, connected digital supply chain that helps fashion companies jump on trends quickly and deliver products that fulfill their customer’s expectations.

Source:

Lectra