From the Sector

Reset
78 results
22.06.2022

Dr Sharon McGuinness selected as ECHA’s new Executive Director

The Management Board of the European Chemicals Agency has selected Dr Sharon McGuinness as ECHA’s next Executive Director. As part of the appointment procedure, she will make a statement before the European Parliament and answer questions from its members. This is tentatively scheduled for 4 July 2022.

Dr Sharon McGuinness, an Irish national, is the Chief Executive Officer of the Health and Safety Authority (HSA) in Ireland since 2018. Prior to this, she was the Assistant Chief Executive for the Chemicals and Prevention Division within the Authority, with responsibility for division management, policy provision, advice and enforcement for a wide range of occupational health and safety, chemical and market surveillance legislation aimed at protecting human health and safety for workers and consumers.

She was a member of ECHA’s Management Board between 2014-2020 and Chair of the Board between 2016-2020. She graduated from the University College Dublin with a B.Sc. (Hons) in pharmacology and chemistry, and she holds a PhD in pharmacology, as well as diplomas in Legal Studies and Company Direction.

The Management Board of the European Chemicals Agency has selected Dr Sharon McGuinness as ECHA’s next Executive Director. As part of the appointment procedure, she will make a statement before the European Parliament and answer questions from its members. This is tentatively scheduled for 4 July 2022.

Dr Sharon McGuinness, an Irish national, is the Chief Executive Officer of the Health and Safety Authority (HSA) in Ireland since 2018. Prior to this, she was the Assistant Chief Executive for the Chemicals and Prevention Division within the Authority, with responsibility for division management, policy provision, advice and enforcement for a wide range of occupational health and safety, chemical and market surveillance legislation aimed at protecting human health and safety for workers and consumers.

She was a member of ECHA’s Management Board between 2014-2020 and Chair of the Board between 2016-2020. She graduated from the University College Dublin with a B.Sc. (Hons) in pharmacology and chemistry, and she holds a PhD in pharmacology, as well as diplomas in Legal Studies and Company Direction.

Dr McGuinness was one of the candidates preselected by the European Commission after an open competition and interviewed by the Management Board for the post.

Her selection follows that of Bjorn Hansen who retired in March 2022. Since 1 April 2022, Shay O’Malley has been ECHA’s acting Executive Director.

The term of office of the Executive Director is five years. It may be prolonged by the Management Board once, for a further term of five years.

More information:
ECHA Dr Sharon McGuinness
Source:

ECHA

17.06.2022

"Lifting Tariffs Would Cement China’s Dominance of Global Manufacturing"

Textile Groups Urge U.S. to Maintain Penalty Tariffs on Finished Products

The Biden administration should maintain Section 301 penalty tariffs on finished textiles and apparel or risk reversing once-in-a-lifetime nearshoring trends and undermining critical investments and jobs in the U.S. and Western Hemisphere, three key American textile manufacturing groups said today.

In a formal submission to the U.S. Trade Representative’s (USTR) office, which is conducting a four-year statutory review of the tariffs, the associations expressed strong support for the continuation of penalty tariffs on imports from China and warned of the consequences associated with removing the tariffs.

“A key aspect of [the Biden administration’s trade] policy is the need to maintain Section 301 tariffs, absent substantive improvements in China’s pervasive, predatory trade practices,” the groups said. Lifting the tariffs “would also do nothing to achieve the administration’s goal of easing inflationary pressures, as apparel prices out of China continue to hit rock bottom even with the Section 301 tariffs,” they noted.

Textile Groups Urge U.S. to Maintain Penalty Tariffs on Finished Products

The Biden administration should maintain Section 301 penalty tariffs on finished textiles and apparel or risk reversing once-in-a-lifetime nearshoring trends and undermining critical investments and jobs in the U.S. and Western Hemisphere, three key American textile manufacturing groups said today.

In a formal submission to the U.S. Trade Representative’s (USTR) office, which is conducting a four-year statutory review of the tariffs, the associations expressed strong support for the continuation of penalty tariffs on imports from China and warned of the consequences associated with removing the tariffs.

“A key aspect of [the Biden administration’s trade] policy is the need to maintain Section 301 tariffs, absent substantive improvements in China’s pervasive, predatory trade practices,” the groups said. Lifting the tariffs “would also do nothing to achieve the administration’s goal of easing inflationary pressures, as apparel prices out of China continue to hit rock bottom even with the Section 301 tariffs,” they noted.

The submission was filed by the National Council of Textile Organizations (NCTO) and the Narrow Fabrics Institute (NFI) and Industrial Fabrics Institute (USIFI) – both divisions of the Advanced Textiles Association (ATA).  The associations represent the entirety of the U.S. textile production chain.

“For decades, China’s illegal actions have undermined virtually every domestic manufacturing sector and contributed to the direct loss of millions of U.S. jobs. These devastating state-sponsored practices include intellectual property theft as well as pervasive state-ownership of manufacturing, industrial subsidies, and abhorrent labor and human rights abuses in the Xinjiang region,” they noted. “Cancelling these tariffs would create further unhealthy dependence on Chinese supply chains and embolden future systematic trade abuses as bad actors know that the U.S. will not hold them accountable.”

The tariffs were imposed on China beginning in 2018 in response to China’s continuing IP and related trade violations. China has since failed to comply with an agreement it reached with the United States in 2020.

More information:
NCTO Tariffs China
Source:

NCTO

15.06.2022

Autoneum updates its outlook for 2022 as a result of the Ukraine war

Due to the impact of the war in Ukraine on the automotive industry and vehicle production as well as of rising inflation, Autoneum is adjusting its corporate outlook for the 2022 financial year. The market recovery will be delayed by current developments.

Since the outbreak of war in Ukraine, new bottlenecks in global supply and logistics chains have been impacting vehicle manufacturer production volumes and thus slowing the revenue and earnings development of the automotive supply industry, especially in Europe. Current developments are accompanied by accelerated inflation and significant price increases on the commodities markets, which have been further exacerbated by the war. These are felt at Autoneum through rising material, energy and transport costs. With regard to the rising costs, automotive manufacturers and suppliers are now required to ensure a fair burden sharing as partners.

Due to the impact of the war in Ukraine on the automotive industry and vehicle production as well as of rising inflation, Autoneum is adjusting its corporate outlook for the 2022 financial year. The market recovery will be delayed by current developments.

Since the outbreak of war in Ukraine, new bottlenecks in global supply and logistics chains have been impacting vehicle manufacturer production volumes and thus slowing the revenue and earnings development of the automotive supply industry, especially in Europe. Current developments are accompanied by accelerated inflation and significant price increases on the commodities markets, which have been further exacerbated by the war. These are felt at Autoneum through rising material, energy and transport costs. With regard to the rising costs, automotive manufacturers and suppliers are now required to ensure a fair burden sharing as partners.

In addition, renewed coronavirus-related lockdowns in China are delaying growth in Asia. According to the revised market forecasts1), global automobile production is expected to reach 80.4 million units in 2022, which represents an increase of 4.1% compared to 2021. Growth will thus be significantly lower than was still expected in mid-February.

Autoneum will do its utmost to minimize the impact on the Group. Despite the present challenges, the strategy will continue to be consistently implemented with a focus on innovative and sustainable technologies for growing markets of the future.

Based on current developments and knowledge, Autoneum has updated the forecasts that it presented at the Media Conference, which had not yet included the impacts of the war as outlined above. Autoneum continues to expect revenue to develop in line with the market. For the first half of the year, the Company expects an EBIT margin at break-even level. On the basis of the ongoing collaborative discussions with customers to participate in the sharing of the sharply increased energy and material costs, Autoneum anticipates an improvement in the EBIT margin to 2.0 to 3.0% (previously: 4.0 to 5.0%) for the full year 2022. Free cash flow for 2022 is expected to be in the mid to high double-digit million range.

Autoneum is very well positioned for the transformation of the automotive industry towards e-mobility and sustainability. Our product portfolio is suitable for all drive types, whether internal combustion, hybrid or pure electric vehicles. The medium-term forecasts that Autoneum published in November 2021 remain unchanged positive. The timing of the market recovery will be delayed by current events and will also depend on further geopolitical developments.

Source:

Autoneum Management AG

(c) Trützschler Nonwovens & Man-Made Fibers GmbH
14.06.2022

Trützschler Man-Made Fibers presents OPTIMA systems for industrial yarns

Trützschler Man-Made Fibers introduces OPTIMA for IDY and expands the range of the OPTIMA extrusion systems by the industrial yarn (IDY) sector. In addition to OPTIMA for carpet yarns (MO40-C, MO40-E and TO40), variants for manufacturing (semi-)industrial multifilament yarns are now joining the line.

Since 2012, Trützschler has been developing and building high-performance extrusion lines for carpet yarns (BCF - Bulk Continuous Filament) and industrial/technical yarns made of polyester, polyamide and polypropylene. The market launch of the OPTIMA concept for BCF took place in 2019 and has established itself in the markets since then. OPTIMA was designed as a modular platform and now also includes solutions in the IDY (InDustrial Yarn) sector.

OPTIMA systems for industrial yarn (TEC-O40 and TEC-O80) impress with flexibility application and end product diversity. Both concepts offer a wide range of design options and can be tailored precisely to meet end product and the throughput requirements.

Trützschler Man-Made Fibers introduces OPTIMA for IDY and expands the range of the OPTIMA extrusion systems by the industrial yarn (IDY) sector. In addition to OPTIMA for carpet yarns (MO40-C, MO40-E and TO40), variants for manufacturing (semi-)industrial multifilament yarns are now joining the line.

Since 2012, Trützschler has been developing and building high-performance extrusion lines for carpet yarns (BCF - Bulk Continuous Filament) and industrial/technical yarns made of polyester, polyamide and polypropylene. The market launch of the OPTIMA concept for BCF took place in 2019 and has established itself in the markets since then. OPTIMA was designed as a modular platform and now also includes solutions in the IDY (InDustrial Yarn) sector.

OPTIMA systems for industrial yarn (TEC-O40 and TEC-O80) impress with flexibility application and end product diversity. Both concepts offer a wide range of design options and can be tailored precisely to meet end product and the throughput requirements.

OPTIMA enables the production of high-tenacity yarns for shoelaces, ropes and nets as well as low-shrinkage qualities for tire cords, truck tarpaulins and airbags. As the lines are modular, they can be quickly adapted to new market developments and end products.

Source:

Trützschler Nonwovens & Man-Made Fibers GmbH

Photo: Archroma
09.06.2022

Archroma at Techtextil 2022 with latest innovations and system solutions

Archroma will be at Techtextil 2022 in Frankfurt am Main, Germany, from 21 to 24 June 2022, to launch its latest innovations and system solutions aimed to help textile manufacturers with optimized sustainability, productivity and value creation in their markets.

Archroma will present 9 new solution systems and 3 innovations, and will hold 2 booth events.

3 innovation highlights

  • PFC-free* Smartrepel® Hydro SR, a new solution developed for the repellence of water-based soil;
  • Biocide-free OX20, a new odor-neutralizing technology newly launched by our partner SANITIZED AG;
  • Perapret® AIR, a new mineral finishing technology for air purification is activated by natural and artificial light sources and can be applied on all fabrics

9 new solution systems
Archroma introduced its first ever solution systems at the Techtextil 2019 edition, and since then has developed more than 30 systems for technical textile and nonwoven applications.

Archroma will be at Techtextil 2022 in Frankfurt am Main, Germany, from 21 to 24 June 2022, to launch its latest innovations and system solutions aimed to help textile manufacturers with optimized sustainability, productivity and value creation in their markets.

Archroma will present 9 new solution systems and 3 innovations, and will hold 2 booth events.

3 innovation highlights

  • PFC-free* Smartrepel® Hydro SR, a new solution developed for the repellence of water-based soil;
  • Biocide-free OX20, a new odor-neutralizing technology newly launched by our partner SANITIZED AG;
  • Perapret® AIR, a new mineral finishing technology for air purification is activated by natural and artificial light sources and can be applied on all fabrics

9 new solution systems
Archroma introduced its first ever solution systems at the Techtextil 2019 edition, and since then has developed more than 30 systems for technical textile and nonwoven applications.

  • CLEAN AIR, a mineral air purification system that stays put on all kinds of fabrics and is activated by artificial and natural light, for as long as there is light; ➔ based on the new Perapret® AIR;
  • CONSCIOUSLY DEEP, a metal-free one-step scouring and dyeing system for medium to very dark colored nylons that stay deep and bright day after day, and are good for you and the planet;
  • EARTH SOFT, a biomass-based and vegan softening system that is suitable for all kind of fibers and makes you comfortable in your own skin;
  • NATURE BOUND, a compostable binder system for food filtration materials that protect you and the planet;
  • ODOR CONTROL 2.0, a system for odor-free sportswear where permastink cannot build up on your favorite clothes, that’s applicable on polyester, cotton and nylon; ➔ based on the new OX20;
  • RAG N’ROLL, a compostable binder system for nonwoven cleaning rags, that protect you and the planet;
  • SAFE SEATS NextGen, a PFC-free* and halogen-free* modular surface treatment system for safer and cleaner seating materials, ➔ based on the new Smartrepel® Hydro SR;
  • SWEET DREAMS, a metal and particle free* system that redefines protection for mattress ticking fabrics, with long-lasting hygiene and outstanding softness, that protects you and the environment;
  • TAKE A BREATH, an enhanced filtration system that keeps your air clean and fresh for longer putting health first and your competition behind;

2 booth events
A WORLD WITHOUT ODORS, FIGHT OR FLIGHT?
Innovation highlight: Biocide-free OX20 odor management solution by SANITIZED AG

Speakers:

  • Nuria Estape, Panel Moderator, Head of Marketing & Promotion, Brand & Performance Textile Specialties, Archroma
  • Georg Lang, Head of CC Finishing, Archroma
  • Stefan Müller, Head of BU Textiles Additives Sanitized
  • Yann Ribourdouille , Global registration expert Product Stewardship, Archroma

A WORLD WITHOUT PFC, DREAM OR REALITY?
Innovation highlight: PFC-free* Smartrepel® Hydro SR

Speakers

  • Nuria Estape, Panel Moderator, Head of Marketing & Promotion, Brand & Performance Textile Specialties, Archroma
  • Roland Borufka, Head of Competence Center Repellents, Archroma
  • Wolfgang Knaup, Head of R&D repellents, Archroma
  • Yann Ribourdouille, Global registration expert Product Stewardship, Archroma
Source:

Archroma / EMG

07.06.2022

EPTA World Pultrusion Conference 2022 explores composites sustainability

The European Pultrusion Technology Association (EPTA) has published a report from its latest conference, which focuses on advances in sustainability and recycling.

More than 130 professionals from the global pultrusion community gathered at the 16th World Pultrusion Conference in Paris on 5-6 May 2022. Organised by EPTA in collaboration with the American Composites Manufacturers Association (ACMA), the event featured 25 international speakers sharing insight on market trends, developments in materials, processing and simulation technologies, and innovative pultruded applications in key markets such as building and infrastructure, transportation and wind energy.

The European Pultrusion Technology Association (EPTA) has published a report from its latest conference, which focuses on advances in sustainability and recycling.

More than 130 professionals from the global pultrusion community gathered at the 16th World Pultrusion Conference in Paris on 5-6 May 2022. Organised by EPTA in collaboration with the American Composites Manufacturers Association (ACMA), the event featured 25 international speakers sharing insight on market trends, developments in materials, processing and simulation technologies, and innovative pultruded applications in key markets such as building and infrastructure, transportation and wind energy.

‘Bio-pultrusion’:  
Composites based on natural fibres offer a number of benefits, including low density and high specific strength, vibration damping, and heat insulation. The German Institutes for Textile and Fiber Research Denkendorf (DITF) are developing pultrusion processes using bio-based resins and natural fibres. Projects include the BioMat Pavilion at the University of Stuttgart, a lightweight structure which combines ‘bamboo-like’ natural fibre-based pultruded profiles with a tensile membrane.

Applications for recycled carbon fibre (rCF):
The use of rCF in composite components has the potential to reduce their cost and carbon footprint. However, it is currently used to a limited extent since manufacturers are uncertain about the technical performance of available rCF products, how to process them, and the actual benefits achievable. Fraunhofer IGCV is partnering with the Institute for Textile Technology (ITA) in the MAI ÖkoCaP project to investigate the technical, ecological and economic benefits of using rCF in different industrial applications. The results will be made available in a web-based app.

Circularity and recycling:
The European Composites Industry Association (EuCIA) is drafting a circularity roadmap for the composites industry. It has collaborated with the European Cement Association (CEMBUREAU) on a position paper for the EU Commission’s Joint Research Centre (JRC) which outlines the benefits of co-processing end-of-life composites in cement manufacturing, a recycling solution that is compliant with the EU’s Waste Framework Directive and in commercial operation in Germany. Initial studies have indicated that co-processing with composites has the potential to reduce the global warming impact of cement manufacture by up to 16%. Technologies to allow recovery of fibre and/or resin from composites are in development but a better understanding of the life cycle assessment (LCA) impact of these processes is essential. EuCIA’s ‘circularity waterfall,’ a proposed priority system for composites circularity, highlights the continued need for co-processing.

Sustainability along the value chain:
Sustainability is essential for the long-term viability of businesses. Resin manufacturer AOC’s actions to improve sustainability include programmes to reduce energy, waste and greenhouse gas emissions from operations, the development of ‘greener’ and low VOC emission resins, ensuring compliance with chemicals legislation such as REACH, and involvement in EuCIA’s waste management initiatives. Its sustainable resins portfolio includes styrene-free and low-styrene formulations and products manufactured using bio-based raw materials and recycled PET.

Source:

European Pultrusion Technology Association EPTA

03.06.2022

B.I.G. is ready for a sustainable future

With an annual report entitled 'Here.We.Go' and a sustainability report 'Shaping sustainable living, together', B.I.G. is also publishing a strong ambition for a sustainable future.

Offering sustainable flooring and material solutions will be the number one priority for the coming years.

The Group's first sustainability report is built around a self-designed sustainability model - "Route 2030" - which is based on achievable commitments, covers the main priorities and reflects B.I.G.'s vision in a sincere way.

Their vision for the B.I.G. change is to actively build a better future by their our carbon footprint to zero and doing business in a transparent, integer way. In this sense, it is the translation of the Group's purpose defined in 2021: shaping sustainable living, together.

With an annual report entitled 'Here.We.Go' and a sustainability report 'Shaping sustainable living, together', B.I.G. is also publishing a strong ambition for a sustainable future.

Offering sustainable flooring and material solutions will be the number one priority for the coming years.

The Group's first sustainability report is built around a self-designed sustainability model - "Route 2030" - which is based on achievable commitments, covers the main priorities and reflects B.I.G.'s vision in a sincere way.

Their vision for the B.I.G. change is to actively build a better future by their our carbon footprint to zero and doing business in a transparent, integer way. In this sense, it is the translation of the Group's purpose defined in 2021: shaping sustainable living, together.

Pol Deturck adds “By 2030, together with a broad group of suppliers, stakeholders and partners, we want to be the leader in sustainable flooring and material solutions. Specifically, our future value proposition is based on products and services that are environmentally & climate friendly, circular and offered by talented, innovative people with an emphasis on integrity and respect for values. This results more in a recurring value proposition for the future.”

Clear growth ambitions
As a 100% family-owned international Group with a clear long-term vision, B.I.G. stayed true to their plans and kept on investing in all areas of their business.
“The ambition for 2021 was to invest over 100 mio euro. But we were held back by external, unforeseen factors: from delays on quotes and execution to the lack of availability and resources due to the pandemic. If all goes as planned, we’ll make up for it in 2022 with an investment budget well over 100 million euro. The main areas of interest will be sustainability, innovation and Industry 4.0.” says Pieter-Jan Sonck, CFO of B.I.G.

Adding to the gradual top-line growth of recent years, the Group can look back on an unprecedented financial boom. The driving forces: favorable market conditions, a revitalized growth strategy and a team of nearly 5.000 first-class employees.

B.I.G. reported a turnover of EUR 2,5 billion, an increase of 45 % compared to 2020. The Group ebitda amounted to EUR 451 million, an increase of 120 % compared to 2020 and a net result of EUR 274 million, a growth of 215% compared to 2020.

Fruitful year for all Business Units
It was a fruitful year for all 3 business units, but the Group's business unit Polymers stood out. Exceptionally strong demand in Europe and North America, combined with raw material shortages and unplanned shutdowns of competitors, pushed prices and margins up to highs. The Polymers facilities ran at full capacity to meet the customers’ needs and hit all-time profit records during several months.

The Group's business unit Flooring Solutions also fared well. Most divisions and regions outperformed amid surging energy prices, disrupted supply chains, cost volatility in transport and raw materials, and other challenges. Their sustained focus on innovation, design and product differentiation led to an improved operating result at the end of 2021.

The achievements by Engineered Solutions echo those of the other two business units, from volume increases to budget increases. B.I.G. took big leaps forward in all its key markets, including the automotive sector, geotextiles and filtration.

Source:

Beaulieu International Group / EMG

(c) Messe Frankfurt (HK) Ltd.
17.05.2022

Cinte Techtextil China to address personal hygiene and sustainability demands

With global consumers becoming more conscious about personal hygiene and environmental protection, exhibitors at Cinte Techtexil China will spotlight materials and technologies for products that respond to these trends. The fair will probe into the associated growth opportunities as the country is one of the leading markets for nonwovens and technical textiles. The event will be held from 6 – 8 September at the Shanghai New International Expo Centre.

The technical textiles and nonwovens industries, the latter notably, are significantly expanding amid the pandemic. A recent forecast[1] predicts that the global polypropylene nonwoven fabric market will continue to rise at a CAGR of 6.7%, reaching USD 39.23 billion by 2028. The anticipated growth is bolstered by demands in end-use industries such as sanitation, medical, automotive and more. In 2020, Asia Pacific was named the largest regional market in the world and is expected to grow significantly over the forecasted period.

With global consumers becoming more conscious about personal hygiene and environmental protection, exhibitors at Cinte Techtexil China will spotlight materials and technologies for products that respond to these trends. The fair will probe into the associated growth opportunities as the country is one of the leading markets for nonwovens and technical textiles. The event will be held from 6 – 8 September at the Shanghai New International Expo Centre.

The technical textiles and nonwovens industries, the latter notably, are significantly expanding amid the pandemic. A recent forecast[1] predicts that the global polypropylene nonwoven fabric market will continue to rise at a CAGR of 6.7%, reaching USD 39.23 billion by 2028. The anticipated growth is bolstered by demands in end-use industries such as sanitation, medical, automotive and more. In 2020, Asia Pacific was named the largest regional market in the world and is expected to grow significantly over the forecasted period.

The prediction reaffirms the growth prospects of nonwovens. In this regard, industry players expressed much optimism about associated future opportunities during Cinte Techtextil China last year. “The field of nonwovens is poised for a positive growth as the awareness of personal hygiene and pandemic prevention sustains in the domestic market,” commented Mr James Gao, Head of Marketing and Textile Technologies, Uster Technologies (China) Co Ltd. He added: “We decided to join the fair and showcase our new launches as we remain confident in the future development of the industry, especially since China is dominating the global scene.”

Going green is the way forward
Turning to yarns and fibres, the sector is shifting to greener and smarter production that echoes the trend towards sustainability that is gaining considerable traction across the globe. Meanwhile in China, this movement was observed by many exhibitors at the 2021 edition, including Mr Roberto Galante, Plant Manager of FMMG Technical Textiles (Suzhou) Co Ltd, the Chinese subsidiary of the Fil Man Made Group. He mentioned: “The market is paying more attention to environmental protection, and we receive enquiries about special yarns for this every day. We focus on technical yarns for filtration as well as anti-bacterial properties, which are very important for the environment. The potential here in China is incredible and this is a big opportunity for everybody.”

Cinte Techtextil China’s product categories cover 12 application areas, which comprehensively span across a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw material providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

(c) adidas AG
13.05.2022

adidas and Juventus Reveal 2022/23 Home Jersey

adidas reveals the Juventus home jersey for the 2022/23 season. The classic black and white stripes are reimagined with a new graphic element to represent the magic of Allianz stadium.

Since the team’s move to the stadium in 2011, fans have enjoyed countless moments of magic at the venue. For this season, in a new dynamic interpretation of the club’s identity, the jersey draws inspiration from the five triangles of the star as symbol of magic, creating a new visual icon.

The new jersey is made with 100% recycled materials and features the latest in adidas’ temperature regulation innovation, HEAT.RDY – KEEP COOL, which is designed to keep players feeling cool, dry, and confident during play by optimizing sweat distribution and maximizing airflow.

The replica shirt offers similar benefits thanks to the inclusion of AEROREADY – KEEP DRY technology, keeping fans comfortable and ready as it manages the body’s sweat for a dry feeling.

adidas reveals the Juventus home jersey for the 2022/23 season. The classic black and white stripes are reimagined with a new graphic element to represent the magic of Allianz stadium.

Since the team’s move to the stadium in 2011, fans have enjoyed countless moments of magic at the venue. For this season, in a new dynamic interpretation of the club’s identity, the jersey draws inspiration from the five triangles of the star as symbol of magic, creating a new visual icon.

The new jersey is made with 100% recycled materials and features the latest in adidas’ temperature regulation innovation, HEAT.RDY – KEEP COOL, which is designed to keep players feeling cool, dry, and confident during play by optimizing sweat distribution and maximizing airflow.

The replica shirt offers similar benefits thanks to the inclusion of AEROREADY – KEEP DRY technology, keeping fans comfortable and ready as it manages the body’s sweat for a dry feeling.

More information:
adidas Sportswear T-Shirt Recycling
Source:

adidas AG

12.05.2022

C.L.A.S.S. Eco Hub launches sustainable Training

C.L.A.S.S. has taken another strategic step with Training, an educational offer made of three moments aimed at sharing valuable and practical information concerning three main areas of sustainable development. Training will be adding value to the Smart Academy offer by C.L.A.S.S., a program of events and conferences, lectures or customized training services, united by an important goal: to educate, raise awareness and inspire professionals, students and even consumers with an eye to the values of responsibility.

There are three trainings offered:

C.L.A.S.S. has taken another strategic step with Training, an educational offer made of three moments aimed at sharing valuable and practical information concerning three main areas of sustainable development. Training will be adding value to the Smart Academy offer by C.L.A.S.S., a program of events and conferences, lectures or customized training services, united by an important goal: to educate, raise awareness and inspire professionals, students and even consumers with an eye to the values of responsibility.

There are three trainings offered:

  1. Introduction to a new generation of fashion
    C.L.A.S.S. team will introduce and explain the new generation of value-driven fashion where the fusion of design, innovation, communication and responsibility shapes an informed and competitive business, able to play both at an economic and social level. Since 2007, at the base of our philosophy is a formula: Virtuous Fashion, the one with the capital F, is the product of an integration of design (D), innovation (I), sustainability (S) and communication (C). In brief: F = D x I x S x C.
     
  2. Introduction to Smart Ingredients
    What is a responsible material? How to source responsibly? Which are the latest smart ingredients that can enrich with new generation fashion collections?
    During the session participant will be guided through materials available in the market, and will have the chance to have an “informed background“ of each one of the materials' journey. Conscious Choices can be made ONLY IF we have all the true full information in our hands. This training informd participant to make the best informed choice for their objectives. A simple but facts driven introduction to the key available innovative and sustainable materials: naturals, transformed and innovative where traceability, transparency, innovation, performance, responsible measurements are leading both the storymaking and the storytelling of each one of them.
     
  3. Introduction to Sustainability Report
    The preparation of the company's sustainability report is a fundamental moment to define objectives, identify improvement actions, and measure its environmental and social impact. It is a job that involves the entire company team, which can transform the report into an opportunity for growth.
    The package offered by C.L.A.S.S., in collaboration with Silvia Gambi, sustainable fashion journalist and podcaster of Solo Moda Sostenibile, combines training with personalized consulting with a coaching action to guide the company team in the preparation of its sustainability report, offering the necessary support to create a document that tells about the company, its values, its commitment and also its objectives.
Source:

C.L.A.S.S.

(c) Baldwin Technology Company Inc.
11.05.2022

Baldwin showcases its “Complete Solution” for security print at Tax Stamp and Traceability Forum

Baldwin Technology Company Inc., an innovator of advanced color-management solutions and inspection technology for the printing industry, will present its “Complete Solution” for printing and inspection at the Tax Stamp and Traceability Forum, held May 16 to 18 in Malta.

Baldwin’s Complete Solution can be any combination of feeders (roll or sheet), vacuum tables, inspection systems, inkjet printers, UV ink-curing systems, reject gates and bins, sheet stackers, and real-time monitoring and reporting tools. Alongside Baldwin’s technologies, optional solution components can be joined together through partnerships with suppliers to create a world-class solution.

Baldwin Technology Company Inc., an innovator of advanced color-management solutions and inspection technology for the printing industry, will present its “Complete Solution” for printing and inspection at the Tax Stamp and Traceability Forum, held May 16 to 18 in Malta.

Baldwin’s Complete Solution can be any combination of feeders (roll or sheet), vacuum tables, inspection systems, inkjet printers, UV ink-curing systems, reject gates and bins, sheet stackers, and real-time monitoring and reporting tools. Alongside Baldwin’s technologies, optional solution components can be joined together through partnerships with suppliers to create a world-class solution.

For advanced defect detection, Baldwin’s Guardian PQV 100% Print Inspection camera systems can be mounted on one or both sides of the product to perform 100% print-quality inspection, verify variable data and inspect the most challenging security print features. The system offers lighting options for all materials and substrates, as well as for special applications, including holograms, covert serialization, covert security features and more. The Guardian PQV can also be retrofitted to existing presses, machines and transports.
 
As part of a data-connected defect-management workflow, the Guardian PQV is a feature-rich inline defect-detection system that enables printers to find and remove defects quickly—and monitor their processes to prevent defects from occurring again or repeatedly. This technology provides complete print-quality verification from prepress through production, reporting and archiving for perfect runs.

Baldwin recently realigned its sales teams to optimize service and simplify access to its process-improvement and consumables technologies for printing and packaging customers in more than 100 countries. Two new sales professionals have since joined the team, covering smaller regional geographies and providing customers with a single point of contact for all of Baldwin’s product lines.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

(c) adidas AG
09.05.2022

adidas and Parley’s initiative "Run for the Oceans" returns for its fifth year

  • adidas x Parley’s global impact initiative, Run for the Oceans, returns for its fifth year, uniting sporting communities across the planet
  • More activities than ever will be eligible for Run for the Oceans, with the introduction of tennis, wheelchair movement, football and more
  • People across the world can take part by signing-up to the challenge from today and logging activity between May 23 – June 8

As we approach World Oceans Day on June 8, adidas and its longstanding partner Parley for the Oceans are once again encouraging the global sporting community to turn activity into action and Run for the Oceans in 2022.

  • adidas x Parley’s global impact initiative, Run for the Oceans, returns for its fifth year, uniting sporting communities across the planet
  • More activities than ever will be eligible for Run for the Oceans, with the introduction of tennis, wheelchair movement, football and more
  • People across the world can take part by signing-up to the challenge from today and logging activity between May 23 – June 8

As we approach World Oceans Day on June 8, adidas and its longstanding partner Parley for the Oceans are once again encouraging the global sporting community to turn activity into action and Run for the Oceans in 2022.

For the first time, new activities have been introduced to the challenge, making this the most inclusive Run for the Oceans yet. People from all parts of the global sporting community are invited to hit the streets, the tennis court and the football field, and unite to help protect the oceans from plastic waste. For every 10 minutes of running from select activities, such as running, tennis or football*, recorded by participants via the adidas Runtastic app, Joyrun, Codoon, Yeudongquan or Strava, Parley will clean up the equivalent weight of one plastic bottle from beaches, remote islands, and coastlines before it reaches the ocean (up to a maximum of 250,000kg).

Launching between May 23 – June 8, the event returns for its fifth year, with the ambition of mobilising a generation to help end plastic waste. Research shows that the world is at a tipping point, with it predicted that oceans will contain more plastic than fish by 2050.

Since the beginning of the partnership in 2015, adidas has made more than 50 million pairs of shoes with Parley Ocean Plastic and close to 18 million pairs in 2021 alone - this includes plastic waste intercepted from beaches and coastal communities, preventing it from polluting the oceans.

For 2022, adidas x Parley have announced the launch of Adizero X Parley and Ultraboost 22 X Parley . With a carbon footprint of just 3.5kg per pair, the Adizero X Parley is the first time adidas and Parley have combined to launch a lower footprint concept, a milestone for the partnership delivered through innovation and with no compromise on shoe performance.  

From raw material interception, processing, packaging, all the way to the end of product life, adidas calculate and communicate its carbon footprint, conforming to an internationally recognized standard: ISO 14067. The footprint results made available provide full transparency on the complete lifecycle of the product.

Source:

adidas AG

(c) Mahlo GmbH + Co. KG
04.05.2022

Altun Tekstil acquires weft straighteners from Mahlo

Turkish company Altun Tekstil, a manufacturer of home textiles and upholstery fabrics, has ordered a total of five of the latest Orthopac RVMC-15 weft straighteners from Mahlo.

The production of textured yarns, weaving and raschel knitting as well as dyeing and finishing is included in Altun’s operations. While the focus is on tulle curtains and upholstery, the company’s fabric range also encompasses a wide variety for apparel.

When investing in the future, Altun Tekstil has consistently trusted in Mahlo and has installed 10 Mahlo Orthopac RVMC-15 weft straighteners in its two plants since 2016.

Lowest residual distortion at highest speed
All the Mahlo weft straighteners Orthopac RVMC-15 are integrated into existing production lines. Mahlo’s latest weft straightener is fit to interact and communicate via the newly mSmart concept with all production lines and provide historical data, which help to improve the production processes.

Turkish company Altun Tekstil, a manufacturer of home textiles and upholstery fabrics, has ordered a total of five of the latest Orthopac RVMC-15 weft straighteners from Mahlo.

The production of textured yarns, weaving and raschel knitting as well as dyeing and finishing is included in Altun’s operations. While the focus is on tulle curtains and upholstery, the company’s fabric range also encompasses a wide variety for apparel.

When investing in the future, Altun Tekstil has consistently trusted in Mahlo and has installed 10 Mahlo Orthopac RVMC-15 weft straighteners in its two plants since 2016.

Lowest residual distortion at highest speed
All the Mahlo weft straighteners Orthopac RVMC-15 are integrated into existing production lines. Mahlo’s latest weft straightener is fit to interact and communicate via the newly mSmart concept with all production lines and provide historical data, which help to improve the production processes.

The fully integrated units benefit from universal control technology and the intuitive Mahlo mSmart G15 visualization concept. The HMI has been optimized for userfriendliness. The visualisation concept is constantly enhanced and ready for Industry 4.0. The path to a digital future within Altun is prepared.

Source:

Mahlo GmbH + Co. KG

(c) DOMO Chemicals
29.04.2022

DOMO Chemicals expands production capacity of TECHNYL® polyamide in China

  • The first year of TECHNYL® in China under the DOMO brand name; DOMO will be pushing forward its expansion plan of high-performance polyamides in China
  • Continued innovation in engineered nylon materials for a sustainable future

DOMO Chemicals announced a long-term investment plan in China to continue expanding its production capacity of TECHNYL® high-performance polyamides. This plan aims to meet growing demand in the automotive, electrical & electronics, and industrial consumer goods industries, and help build a sustainable future. DOMO Chemicals acquired Solvay's Performance Polyamides business in 2020 and has sold the TECHNYL® products globally since February 1, 2022, including in China, one of the company's key strategic markets.

  • The first year of TECHNYL® in China under the DOMO brand name; DOMO will be pushing forward its expansion plan of high-performance polyamides in China
  • Continued innovation in engineered nylon materials for a sustainable future

DOMO Chemicals announced a long-term investment plan in China to continue expanding its production capacity of TECHNYL® high-performance polyamides. This plan aims to meet growing demand in the automotive, electrical & electronics, and industrial consumer goods industries, and help build a sustainable future. DOMO Chemicals acquired Solvay's Performance Polyamides business in 2020 and has sold the TECHNYL® products globally since February 1, 2022, including in China, one of the company's key strategic markets.

The global demand for polyamide materials is currently booming at a CAGR of up to 3 percent. The adoption of new energy vehicles (including pure electric, hybrid and fuel cell vehicles) is expected to reach 45 percent globally by 2030, and automakers are increasingly using sustainable materials to make components, which are key growth drivers of the polyamide market. In addition, the demand for miniaturized circuit breakers, contactors, plug switches, and other components in the electrical and electronics and industrial consumer goods industries further opens up the application potential for polyamide materials.

DOMO Chemicals will continue to expand the capacity of its production site in Jiaxing, Zhejiang Province, which has been planned to be gradually introduced in three stages:

  • Since March 2022, an additional 6,000 tons of capacity has been made available, with the plant achieving the total capacity of 14,000 tons of PA6 from April onwards.
  • A 35,000-ton new plant in Haiyan is planned to be completed in the third quarter of 2023, in which DOMO Chemicals has invested more than 14 million euros (97 million yuan).
  • Going forward, DOMO Chemicals will further expand the plant, gradually increasing its capacity to 50,000 tons.

In addition to the expansion, the plant will also use renewable energy wherever possible, adopt advanced water and air treatment technologies to reduce water consumption and CO2 emissions, and fully comply with Health, Safety and Environmental Management System (HSE) regulations. DOMO Chemicals will improve HSE compliance continuously and work closely with the local government, while partnering with key local and global customers to accelerate innovation and development across a wide range of industries.

TECHNYL® has been committed to helping customers improve their low-carbon competitiveness since its very first year in China. It allows OEMs and component makers in the automotive, electrical & electronics, and industrial consumer goods segments to create lightweight, durable, aesthetically pleasing, smart and environmentally-friendly products.

Source:

DOMO Chemicals / Marketing Solutions NV

28.04.2022

Lectra published its financial report for Q1 2022

  • Revenues: 122.0 million euros (+83%)
  • EBITDA before non-recurring items: 21.6 million euros (+90%)
  • Net income: 9.3 million euros (+55%)
  • Free cash flow before non-recurring items: 7.1 million euros

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the unaudited consolidated financial statements for the first quarter of 2022.
To facilitate analysis of the Group’s results, the financial statements are compared to those published in 2021 and to the Q1 2021 pro forma figures ("2021 Pro forma"), prepared by integrating the three acquisitions made in 2021 – Gerber Technology (“Gerber”), Neteven, and Gemini CAD Systems (“Gemini”) – as if they had been consolidated from January 1, 2021, whereas they have been consolidated since June 1, July 28 and September 27, 2021 respectively.

See the attached document for more details about the financial statements.

  • Revenues: 122.0 million euros (+83%)
  • EBITDA before non-recurring items: 21.6 million euros (+90%)
  • Net income: 9.3 million euros (+55%)
  • Free cash flow before non-recurring items: 7.1 million euros

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the unaudited consolidated financial statements for the first quarter of 2022.
To facilitate analysis of the Group’s results, the financial statements are compared to those published in 2021 and to the Q1 2021 pro forma figures ("2021 Pro forma"), prepared by integrating the three acquisitions made in 2021 – Gerber Technology (“Gerber”), Neteven, and Gemini CAD Systems (“Gemini”) – as if they had been consolidated from January 1, 2021, whereas they have been consolidated since June 1, July 28 and September 27, 2021 respectively.

See the attached document for more details about the financial statements.

26.04.2022

Lenzing Annual General Meeting approves all agenda items

  • Dividend of EUR 4.35 per share approved
  • Lenzing Supervisory Board reduced from ten to nine elected members
  • Dipl.-Bw. Peter Edelmann steps down from the Supervisory Board at his request
  • Cord Prinzhorn, MBA, elected Chairman of the Supervisory Board

The 78th Annual General Meeting of Lenzing AG on April 26, 2022, passed a resolution to pay a dividend of EUR 4.35 per share in accordance with the Managing Board’s profit distribution proposal, which had been approved by the Supervisory Board. As a consequence, the payment of the dividend amounts to a total of EUR 115,492,500. The payment will be made on May 03, 2022.

  • Dividend of EUR 4.35 per share approved
  • Lenzing Supervisory Board reduced from ten to nine elected members
  • Dipl.-Bw. Peter Edelmann steps down from the Supervisory Board at his request
  • Cord Prinzhorn, MBA, elected Chairman of the Supervisory Board

The 78th Annual General Meeting of Lenzing AG on April 26, 2022, passed a resolution to pay a dividend of EUR 4.35 per share in accordance with the Managing Board’s profit distribution proposal, which had been approved by the Supervisory Board. As a consequence, the payment of the dividend amounts to a total of EUR 115,492,500. The payment will be made on May 03, 2022.

The Annual General Meeting formally discharged the members of the Managing Board and the Supervisory Board from liability for the 2021 financial year, and set in advance the remuneration for the members of the Supervisory Board for the 2022 financial year. In addition, a vote was hold concerning the principles for the remuneration of the members of the Managing Board and the Supervisory Board (remuneration policy). The remuneration policy of Lenzing AG for the performance-based remuneration of the Managing Board is linked not only to financial performance criteria but also to non-financial sustainability criteria (ESG), which further promote the sustainable business strategy.

Elections to the Supervisory Board
Dipl.-Bw. Peter Edelmann stepped down from the Supervisory Board upon his own request, at the end of the Annual General Meeting. Mr. Edelmann has served as a member of the Supervisory Board since 2018 and as its Chairman since 2019, as well as on all committees of Lenzing AG.

The Annual General Meeting passed a resolution to extend the Supervisory Board mandates of Mag. Patrick Prügger (until the AGM that passes related resolutions concerning the 2022 financial year) and of Dr. Astrid Skala-Kuhmann (until the AGM that passes related resolutions concerning the 2025 financial year).

The Supervisory Board of Lenzing AG now consists of nine members elected by the AGM: Mag. Helmut Bernkopf, Dr. Christian Bruch, Dr. Stefan Fida, Dr. Markus Fürst, Dr. Franz Gasselsberger, Melody Harris-Jensbach, Cord Prinzhorn, MBA, Mag. Patrick Prügger and Dr. Astrid Skala-Kuhmann. Herbert Brauneis, Ing. Daniela Födinger, Helmut Kirchmair, Georg Liftinger und Johann Schernberger were appointed to the Supervisory Board by the Works Council.

At the constitutive Supervisory Board meeting following the AGM, Cord Prinzhorn, MBA, who had returned to the Supervisory Board after serving as CEO on an interim basis, was elected Chairman, and Dr. Stefan Fida was elected Deputy Chairman of the Supervisory Board.

Source:

Lenzing AG

22.04.2022

Haelixa marks and traces sustainable cotton from Costach and Creditex in Peru

Under the United Nations Economic Commission for Europe (UNECE) initiative to enhance transparency and traceability in the garment and footwear industry, Haelixa realizes a pilot project with Costach Cooperative and Peruvian textile company Creditex to give sustainable rural cotton producers in Peru more visibility in the value chain.

Under the United Nations Economic Commission for Europe (UNECE) initiative to enhance transparency and traceability in the garment and footwear industry, Haelixa realizes a pilot project with Costach Cooperative and Peruvian textile company Creditex to give sustainable rural cotton producers in Peru more visibility in the value chain.

In 2019, UNECE and United Nations Centre for Trade Facilitation and Electronic Business (UN/CEFACT) have set up an initiative to drive transparency and traceability for sustainable value chains in the garment and footwear industry. The initiative is jointly implemented with the International Trade Centre (ITC) with financial support by the European Union. Haelixa is proud to be part of the group of experts that develops policy recommendations, traceability standards, and conducts projects to set traceability benchmarks. With the support of the +Cotton Project, implemented by the Food and Agriculture Organization of the United Nations (FAO) and the Brazilian Cooperation Agency (ABC) a pilot is being realized in this context to mark and trace the finest Pima cotton for Creditex directly at the gin in Piura, Peru. Haelixa’s DNA marker connects the actual lint cotton to the entry on a blockchain system provided by UNECE. The Haelixa technology ensures that the information about the product’s origin and the journey of the product along the value chain is always safely embedded into the product itself. The marked cotton will be used to make exclusive pajamas sets for Cat´s Pajamas. DNA traceability will enable the verification of the premium origin of Peruvian Pima cotton in the final garment produced using sustainable practices by family farmers associated with the Costach cooperative.

Costach is the main cooperative of cotton farmers in Peru. The cooperative consists of 5,200 family farmers in the Piura region, producing mostly extra-long fiber of Pima Cotton. Since 2017, the +Cotton project has been supporting the farmers with training on sustainable practices and has been providing technical assistance for improved markets access.

Creditex is vertically integrated from cotton ginning to fine thread, up to the production of high quality apparel for international premium brands. The company takes social responsibility and environmental stewardship very seriously and therefore makes a strong partner for this project, empowering the cotton family farmers that hold the majority of cotton production in Peru.

Source:

Haelixa Ltd

(c) Stony Creek Colors
22.04.2022

Archroma and Stony Creek Colors produce plant-based pre-reduced indigo

Archroma and Stony Creek Colors (“Stony Creek”), a manufacturer of traceable natural indigo dyes, announced that they have entered a strategic partnership to produce and bring to the market Stony Creek’s IndiGold™ high-performance plant-based pre-reduced indigo at scale.

Stony Creek extracts its dye from proprietary Indigofera plant varieties grown in partnership with family farms as a regenerative rotational crop.

Stony Creek Colors developed the new IndiGold™ concept as on of the world’s first pre-reduced natural indigo dyes, which was then developed with Archroma to offer a plant-based alternative to synthetic pre-reduced indigo. The dyestuff will be sold as a 20% concentration in a soluble liquid form that displays similar performance to comparable synthetic indigo products available on the market.

Stony Creek Colors evolved into an innovative leader in plant-based indigo due to its complete development of an improved agricultural value chain, from seed breeding and production to biomass harvest and extraction. The company has been selling its US grown indigo to denim mills since 2015.

Archroma and Stony Creek Colors (“Stony Creek”), a manufacturer of traceable natural indigo dyes, announced that they have entered a strategic partnership to produce and bring to the market Stony Creek’s IndiGold™ high-performance plant-based pre-reduced indigo at scale.

Stony Creek extracts its dye from proprietary Indigofera plant varieties grown in partnership with family farms as a regenerative rotational crop.

Stony Creek Colors developed the new IndiGold™ concept as on of the world’s first pre-reduced natural indigo dyes, which was then developed with Archroma to offer a plant-based alternative to synthetic pre-reduced indigo. The dyestuff will be sold as a 20% concentration in a soluble liquid form that displays similar performance to comparable synthetic indigo products available on the market.

Stony Creek Colors evolved into an innovative leader in plant-based indigo due to its complete development of an improved agricultural value chain, from seed breeding and production to biomass harvest and extraction. The company has been selling its US grown indigo to denim mills since 2015.

The pre-reduced plant-based indigo partnership took root in 2020 when Stony Creek was looking to work with like-minded partners to produce the new dyestuff at scale. Archroma emerged as the ideal partner as the company is well known for its expertise in indigo manufacturing and application, as well as for its commitment to transform the denim industry towards creating better blue jeans.

Archroma immediately offered to support the idea of Stony Creek Colors with extensive pilot scale manufacturing trials and engaged with its network of denim machinery manufacturers to test the first samples in industrial conditions. The trials showed excellent coloration and the typical indigo wash down, as with synthetic indigo. Archroma will produce the first batches of IndiGold™ in Salvatierra, Mexico, and has other locations where the product could be made. The company will support Stony Creek Colors through its manufacturing and logistics capabilities, and its expertise in denim dyeing with customers using pre-reduced indigo.

While this development was underway, the global innovation platform Fashion for Good selected Stony Creek Colors as an innovator in its global Innovation Program. The program connects brands with innovators to work together to test, validate and ultimately scale disruptive innovations in the fashion industry to drive positive impact. Through the program, Fashion for Good facilitated a collaboration between brand partner Levi Strauss & Co. and Stony Creek Colors which was announced in December 2021. The partners will pilot the use of IndiGold™ in denim mills at scale, with the goal of unlocking key learnings around shade application and other efficiencies of this new dyestuff.

Source:

Archroma / EMG

(c) Hologenix, LLC
11.04.2022

Hologenix® receives recognition for pure white CELLIANT

Hologenix® announces that its newest innovation has achieved two recognitions. In addition to being a Top Ten winner in the Fibers & Insulation Category of ISPO Textrends Fall/Winter 2023/24, pure white CELLIANT has been shortlisted in the Drapers Sustainable Fashion 2022 Awards. The company is sharing the spotlight with recognized brands such as H&M, Sweaty Betty and Timberland. According to Drapers, the leading authority on fashion retailing in the UK since 1887, which sponsors these awards annually, this year they received the most entries ever, making them very competitive.

To create pure white CELLIANT rPET fiber, Hologenix developed a strategic partnership with the Ireland-based Wellman International Limited, a fully owned subsidiary of Indorama Ventures. Indorama Ventures is investing $1.5 billion on sustainability initiatives, allowing them to recycle 50 billion PET bottles globally by 2025 to support the growth of the circular economy. Wellman International has been a pioneer of recycling technologies for almost 50 years, offering specialist solutions for the medical, hygiene, automotive, home care and apparel sectors.  

Hologenix® announces that its newest innovation has achieved two recognitions. In addition to being a Top Ten winner in the Fibers & Insulation Category of ISPO Textrends Fall/Winter 2023/24, pure white CELLIANT has been shortlisted in the Drapers Sustainable Fashion 2022 Awards. The company is sharing the spotlight with recognized brands such as H&M, Sweaty Betty and Timberland. According to Drapers, the leading authority on fashion retailing in the UK since 1887, which sponsors these awards annually, this year they received the most entries ever, making them very competitive.

To create pure white CELLIANT rPET fiber, Hologenix developed a strategic partnership with the Ireland-based Wellman International Limited, a fully owned subsidiary of Indorama Ventures. Indorama Ventures is investing $1.5 billion on sustainability initiatives, allowing them to recycle 50 billion PET bottles globally by 2025 to support the growth of the circular economy. Wellman International has been a pioneer of recycling technologies for almost 50 years, offering specialist solutions for the medical, hygiene, automotive, home care and apparel sectors.  

Pure white CELLIANT rPET fiber is sustainably manufactured, with a low-impact supply chain. It is achieved by embedding bioceramic materials, that are naturally derived and ethically sourced, into fibers, yarns and fabrics. Wellman International has converted 100% of pure white CELLIANT Polyester production into rPET. This conversion to rPET has been implemented across all CELLIANT product categories, replacing traditional polyester and dramatically enhancing CELLIANT’s sustainability initiatives.

Pure white CELLIANT is recognized as a Class 1 medical device in the European Union and is able to carry the CE mark. Like CELLIANT, pure white CELLIANT captures and converts body heat into infrared energy, powering bio-responsive textiles. This energy is reflected back to the body, resulting in increased local circulation and cellular oxygenation. These advantages have a variety of wellness benefits, including stronger performance, faster recovery and better sleep, as well as many functional properties such as thermoregulation, quick-dry properties and odor inhibition.  

Wellman International distributes pure white CELLIANT fibers across Europe, the Middle East, Africa, Asia and the USA.

Source:

Hologenix, LLC / Sarah P. Fletcher Communications

(c) C.L.A.S.S.
07.04.2022

Bemberg™ x Payal Pratap collaboration with colourful prints at FDCI X Lakmé Fashion Week

Through the collaboration Payal Pratap and Bemberg™ by Asahi Kasei show a new way of making fashion, based on merging craft & tech, cutting-edge materials and deeply rooted optimism in troubled times.

With a strong focus on prints, the designer, Payal Pratap, has worked on hand-painted artworks which have then been digitized. The designs capture detailed elements and a three-dimensional depth and texture from the age-old crafts of Batik, plus powerful imagery and minute detailing from the ancient craft of Chintz printing. Batik was named after the Javanese words “Amba” which means to write and “Titik”, which translates to a dot or a point, while Chintz comes from the Hindi word “Cheent”, meaning spotted or speckled.  Both these techniques and crafts have been used in a contemporary context while creating the art works.

Through the collaboration Payal Pratap and Bemberg™ by Asahi Kasei show a new way of making fashion, based on merging craft & tech, cutting-edge materials and deeply rooted optimism in troubled times.

With a strong focus on prints, the designer, Payal Pratap, has worked on hand-painted artworks which have then been digitized. The designs capture detailed elements and a three-dimensional depth and texture from the age-old crafts of Batik, plus powerful imagery and minute detailing from the ancient craft of Chintz printing. Batik was named after the Javanese words “Amba” which means to write and “Titik”, which translates to a dot or a point, while Chintz comes from the Hindi word “Cheent”, meaning spotted or speckled.  Both these techniques and crafts have been used in a contemporary context while creating the art works.

The prints encompass flora and fauna, bringing nature from the outside to the inside through the use of extensive flower, leaf, tree, vine and bird motifs, as an ode to sustainability. Placement prints have been engineered to make tailored jackets and structured pieces. A timeless collection comprising experimental pieces that blend the far east with India. A collection signaling holiday with a burst of colour. Bemberg™ in various avatars ranging from satins, muslins, mulmul, and silk blends have been used to create a collection with fluid drapes as well as structure.

The fabric takes printing and colour beautifully and has a slight sheen and glazed feel which resonates with chintz. The colour palette ranges from indigos, browns, rust, to burgundy brick and gold. Furthermore, Bemberg™ is an inherently sustainable ingredient, since it is made with cotton linters, pre-consumer materials derived from the cotton oil industry, and converted through a traceable and transparent closed loop process. Coming from nature and going back towards nature, the Bemberg™ fiber is also biodegradable and compostable.

Source:

Asahi Kasei / C.L.A.S.S.