From the Sector

Reset
770 results
20.10.2023

Rieter: Further job cuts, outlook for 2023 confirmed

Rieter’s cumulative sales in the first nine months of 2023 amounted to CHF 1 092.9 million (2022: CHF 987.4 million), an increase of 11% compared to the prior-year period. In particular, supply bottlenecks eased slightly, which allowed more machines to be delivered than in the same period last year. Sales in the third quarter of 2023
were CHF 334.7 million (Q3 2022: CHF 366.8 million).

The Business Group Machines & Systems generated total sales of CHF 749.6 million in the first nine months of 2023 (+18%). The Business Group Components posted sales of CHF 206.8 million, 11% lower than in the corresponding period of the previous year, while the Business Group After Sales recorded growth of 13% to CHF 136.5 million in the first nine months of 2023.

Order intake in the reporting period was characterized by restrained investment in new machinery in almost all regions except China. Demand for consumables, wear & tear and spare parts continued to weaken due to the slowdown in spinning mill capacity utilization. Rising interest rates and high energy and raw material prices also had a dampening effect.

Rieter’s cumulative sales in the first nine months of 2023 amounted to CHF 1 092.9 million (2022: CHF 987.4 million), an increase of 11% compared to the prior-year period. In particular, supply bottlenecks eased slightly, which allowed more machines to be delivered than in the same period last year. Sales in the third quarter of 2023
were CHF 334.7 million (Q3 2022: CHF 366.8 million).

The Business Group Machines & Systems generated total sales of CHF 749.6 million in the first nine months of 2023 (+18%). The Business Group Components posted sales of CHF 206.8 million, 11% lower than in the corresponding period of the previous year, while the Business Group After Sales recorded growth of 13% to CHF 136.5 million in the first nine months of 2023.

Order intake in the reporting period was characterized by restrained investment in new machinery in almost all regions except China. Demand for consumables, wear & tear and spare parts continued to weaken due to the slowdown in spinning mill capacity utilization. Rising interest rates and high energy and raw material prices also had a dampening effect.

In this market environment, the Rieter Group received orders totaling CHF 452.2 million in the first nine months of 2023 (2022: CHF 1 095.8 million). In the third quarter of 2023, orders decreased by 44% year-on-year to CHF 127.2 million (2022: CHF 226.4 million).

Rieter expects the market to have bottomed out in the year 2023 and anticipates a gradual market recovery in the course of the 2024 financial year.

As of September 30, 2023, Rieter has an order backlog of around CHF 900 million (September 30, 2022: CHF 2 000 million). The current order backlog will allow good capacity utilization at the production facilities into the coming year. The cancellation rate in the reporting period was within the usual range, averaging around 5% of the order backlog, with a slight downward trend.

In July 2023, the Group launched the “Next Level” performance program aimed at strengthening sales excellence, sharpening customer focus, improving cost efficiency in production and optimizing fixed cost structures. By taking these measures, Rieter intends to create the basis for providing an even more agile response to the cyclical nature of the machinery business. The objective of the planned initiatives is to ensure the profitable and sustainable development of the group.

The performance program includes provisions for the net reduction of approximately 300 positions in overhead functions across the group, primarily in Germany and Switzerland. The consultation processes initiated with the employee representatives in Ingolstadt (Germany) and Winterthur (Switzerland) were completed in the third quarter of 2023. The majority of these workforce reductions are expected to be implemented by the end of December 2023.

Due to the current market situation, further market- and volume-related adjustments in the range of 400 to 600 positions will be necessary, mainly in production. However, the actual number of positions to be reduced depends on the order intake in the coming months.

Rieter continues to expect that the strategic and operational measures initiated will result in one-off restructuring costs of around CHF 45 to 50 million, which will impact earnings in the 2023 financial year.

Outlook for the full year 2023 confirmed
As announced on July 20, 2023, in view of the economic situation and the ongoing cyclical market weakness, Rieter continues to expect below-average demand for new equipment in the coming months. A revival is not anticipated until the end of 2023 at the earliest. Likewise, Rieter believes that demand for consumables, wear & tear and spare parts will not recover until towards the end of 2023.

For the full year 2023, Rieter expects an EBIT margin of around 5 to 7% (including positive special effects of less than 2%) and sales at the previous year’s level of around CHF 1.5 billion.

Source:

Rieter Holding AG

18.10.2023

adidas: Preliminary third quarter results and increases full year guidance

adidas announced preliminary results for the third quarter of 2023. In Q3, currency-neutral revenues increased 1% versus the prior year level. In euro terms, the company’s revenues declined 6% to € 5.999 billion (2022: € 6.408 billion). The company’s gross margin improved 0.2 percentage points to 49.3% in Q3 (2022: 49.1%). Operating profit reached € 409 million during the quarter (2022: € 564 million), reflecting an operating margin of 6.8% (2022: 8.8%). While the company’s performance in the quarter was again positively impacted by the sale of parts of its remaining Yeezy inventory, the underlying adidas business also developed better than expected.

Consequently, the company has updated its full year guidance: adidas now expects currency-neutral revenues to decline at a low-single-digit rate in 2023 (previously: decline at a mid-single-digit rate). At the same time, the company’s underlying operating profit – excluding any one-offs related to Yeezy and the ongoing strategic review – is now anticipated to reach a level of around €100 million in 2023 (previously: around break-even level).

adidas announced preliminary results for the third quarter of 2023. In Q3, currency-neutral revenues increased 1% versus the prior year level. In euro terms, the company’s revenues declined 6% to € 5.999 billion (2022: € 6.408 billion). The company’s gross margin improved 0.2 percentage points to 49.3% in Q3 (2022: 49.1%). Operating profit reached € 409 million during the quarter (2022: € 564 million), reflecting an operating margin of 6.8% (2022: 8.8%). While the company’s performance in the quarter was again positively impacted by the sale of parts of its remaining Yeezy inventory, the underlying adidas business also developed better than expected.

Consequently, the company has updated its full year guidance: adidas now expects currency-neutral revenues to decline at a low-single-digit rate in 2023 (previously: decline at a mid-single-digit rate). At the same time, the company’s underlying operating profit – excluding any one-offs related to Yeezy and the ongoing strategic review – is now anticipated to reach a level of around €100 million in 2023 (previously: around break-even level).

Including the positive impact from the two Yeezy drops in Q2 and Q3, the potential write-off of the remaining Yeezy inventory of now around € 300 million (previously: € 400 million) and one-off costs related to the strategic review of up to € 200 million (unchanged), adidas now expects to report an operating loss of around € 100 million in 2023 (previously: loss of € 450 million).

Source:

adidas AG

17.10.2023

Library of Colors fully Integrated Into Shima Seiki Design System With Color Atlas By Archroma®

Archroma and Shima Seiki have expanded their partnership to bring the industry’s largest library of colors for cotton and polyester to the SDS®-ONE APEX design, planning and virtual sampling system and APEXFiz® (hereafter SDS®-ONE APEX series) subscription software.

Now offering a total of 5,760 color references, SDS-ONE APEX series has added all 1,440 colors for polyester from The Color Atlas by Archroma® to its color library of 4,320 Color Atlas colors for cotton poplin. The new polyester collection ranges from neutral earth tones to vibrant jewel tones and on-trend fluorescent colors, with shades suitable for sportswear, fashion, home furnishings, automotive textiles and more.

The extended color library in SDS®-ONE APEX series will help designers and manufacturers to visualize and evaluate their design choices on realistic fabric simulations and then put them into production with dyes and finishes that meet their desired sustainability profile. The Shima Seiki system also offers a smooth transition to machine programming for quick and accurate production, reduced waste and accelerated time to market.

Archroma and Shima Seiki have expanded their partnership to bring the industry’s largest library of colors for cotton and polyester to the SDS®-ONE APEX design, planning and virtual sampling system and APEXFiz® (hereafter SDS®-ONE APEX series) subscription software.

Now offering a total of 5,760 color references, SDS-ONE APEX series has added all 1,440 colors for polyester from The Color Atlas by Archroma® to its color library of 4,320 Color Atlas colors for cotton poplin. The new polyester collection ranges from neutral earth tones to vibrant jewel tones and on-trend fluorescent colors, with shades suitable for sportswear, fashion, home furnishings, automotive textiles and more.

The extended color library in SDS®-ONE APEX series will help designers and manufacturers to visualize and evaluate their design choices on realistic fabric simulations and then put them into production with dyes and finishes that meet their desired sustainability profile. The Shima Seiki system also offers a smooth transition to machine programming for quick and accurate production, reduced waste and accelerated time to market.

Each of the 5,760 Color Atlas color references in the SDS®-ONE APEX series design software is available as a physical color standard that includes precise dyeing recipes and compliance data, as well as access to expert technical support from Archroma around the world.

“Polyester remains the most popular choice across many textile segments where high performance is a must. Users of Shima Seiki’s advanced SDS®-ONE APEX series platform will now be able to select from the industry’s largest library of colors for both cotton and polyester and, more importantly, trust that their choice can be reliably executed,” Chris Hipps, Head of Strategic Business Development, Archroma Color Management, said.

“Our colors are formulated with dyes that comply with international eco-standards and work with Archroma’s groundbreaking coloration systems, like FAST SPORT,” he continued.

More information:
Color Atlas Archroma Shima Seiki
Source:

Archroma

Dyneema® SB301 to Enable Weight Savings of up to 20% in Protective Body Armor Image Avient
10.10.2023

Dyneema®: Weight Savings of up to 20% in Protective Body Armor

Dyneema® announced the launch of a next-generation unidirectional (UD) material innovation based on its third-generation fiber at the polymer level: a development poised to enhance the safety and mobility of law enforcement officers and military forces through molecular engineering.

This evolution enables a higher-tenacity fiber – resulting in increased ballistic stopping power when used in the new UD material, Dyneema® SB301, for protective armor applications. The seismic shift in performance enables body armor manufacturers to design soft armor vests 10–20% lighter than previous protective solutions.

Beyond strength, Dyneema® SB301 has the advantage of being made from bio-based Dyneema® fiber, which enables a carbon footprint up to 90% lower than generic high modulus polyethylene (HMPE) fiber.

Now available for use in law enforcement vests for the US market, Dyneema® SB301 material is manufactured in Greenville, North Carolina, in compliance with the Berry Amendment, with additional markets to follow.

Dyneema® announced the launch of a next-generation unidirectional (UD) material innovation based on its third-generation fiber at the polymer level: a development poised to enhance the safety and mobility of law enforcement officers and military forces through molecular engineering.

This evolution enables a higher-tenacity fiber – resulting in increased ballistic stopping power when used in the new UD material, Dyneema® SB301, for protective armor applications. The seismic shift in performance enables body armor manufacturers to design soft armor vests 10–20% lighter than previous protective solutions.

Beyond strength, Dyneema® SB301 has the advantage of being made from bio-based Dyneema® fiber, which enables a carbon footprint up to 90% lower than generic high modulus polyethylene (HMPE) fiber.

Now available for use in law enforcement vests for the US market, Dyneema® SB301 material is manufactured in Greenville, North Carolina, in compliance with the Berry Amendment, with additional markets to follow.

“In every situation, weight is now considered to be the top priority after ballistic stopping power,” said Marcelo van de Kamp, global business director for personal protection at Avient. “That’s because survivability is directly tied to weight savings when speed and agility determine outcomes. We’ve long been known as the ‘world’s strongest fiber™,’ but that won’t stop us from finding new opportunities to get stronger. This new product is the latest demonstration of our commitment to both innovation and protection.”

Source:

Avient Corporation

Polartec PS Photo Polartec
09.10.2023

Polartec: Plant-based nylon resulting in a 50% lower carbon footprint vs. virgin nylon

Polartec, will upgrade two of its product platforms now using Biolon™ *, plant-based nylon fiber and membrane setting a new standard in sustainability for performance fabrics. Polartec®  Power Shield™ and Power Stretch™ Pro fabrics containing Biolon™ fibers and membranes will premiere this autumn.

Biolon™ is a renewable, non-GMO plant-based nylon with a 50% lower carbon footprint than virgin Nylon 6,6.  Biolon™ nylon properties  are closer to Nylon 6,6 than many recycled nylon alternatives currently on the market.  Biolon™ has re-worked a staple, making the best, better in terms of performance and sustainability. Its plant-based inputs account for approximately half (45-48%) of the nylon content in the fibers and membranes in new Polartec® Power Shield™ and Power Stretch™ Pro fabrics debuting this fall.

Polartec, will upgrade two of its product platforms now using Biolon™ *, plant-based nylon fiber and membrane setting a new standard in sustainability for performance fabrics. Polartec®  Power Shield™ and Power Stretch™ Pro fabrics containing Biolon™ fibers and membranes will premiere this autumn.

Biolon™ is a renewable, non-GMO plant-based nylon with a 50% lower carbon footprint than virgin Nylon 6,6.  Biolon™ nylon properties  are closer to Nylon 6,6 than many recycled nylon alternatives currently on the market.  Biolon™ has re-worked a staple, making the best, better in terms of performance and sustainability. Its plant-based inputs account for approximately half (45-48%) of the nylon content in the fibers and membranes in new Polartec® Power Shield™ and Power Stretch™ Pro fabrics debuting this fall.

Ramesh Kesh, Senior Vice President – Government & Defense and Polartec at Milliken & Company said, “For a long time, many thought that sustainable options meant a loss in performance, like durability, Polartec has proved that this is not the case. Challenging a technology already considered to be at the pinnacle of performance was a big ask yet the team at Polartec rose to that challenge and we believe we have created a new standard in sustainability for performance fabrics.” 

More information:
Polartec Biolon nylon
Source:

Abi Youcha (Akimbo Communication)

A Carbios employee loads textile onto the preparation line Photo Carbios
09.10.2023

Carbios: New textile preparation line for polyester recycling

Carbios, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, inaugurated its textile preparation line at its demonstration plant in Clermont-Ferrand.

To streamline the textile preparation phase, which is currently carried out by hand or on several lines, Carbios has developed a fully integrated and automated line that transforms textile waste from used garments or cutting scraps into raw material suitable for depolymerization with its enzymatic biorecycling process.  

The patented line integrates all preparation stages (shredding and extraction of hard points such as buttons or fasteners), and provides Carbios with a high-performance, scalable development tool. The platform will help validate the biorecycling technology for textiles at demonstration plant scale (by 2024), and provides Carbios with expertise in working with collection and sorting operators to specify the quality of textiles and the preparation steps needed to make them suitable for enzymatic recycling.

Carbios, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, inaugurated its textile preparation line at its demonstration plant in Clermont-Ferrand.

To streamline the textile preparation phase, which is currently carried out by hand or on several lines, Carbios has developed a fully integrated and automated line that transforms textile waste from used garments or cutting scraps into raw material suitable for depolymerization with its enzymatic biorecycling process.  

The patented line integrates all preparation stages (shredding and extraction of hard points such as buttons or fasteners), and provides Carbios with a high-performance, scalable development tool. The platform will help validate the biorecycling technology for textiles at demonstration plant scale (by 2024), and provides Carbios with expertise in working with collection and sorting operators to specify the quality of textiles and the preparation steps needed to make them suitable for enzymatic recycling.

More information:
Carbios enzymatic textile recycling
Source:

Carbios

adidas and Arsenal unveil first away kit with Stella McCartney (c) adidas AG
06.10.2023

adidas and Arsenal unveil first away kit with Stella McCartney

  • The new high-performance away kit design blends bold geometric prints with shades of halo pink and soft, pastel glow blue, pushing the boundaries of on-pitch sport style.
  • The limited-edition range includes a gender-neutral game-day match shirt as well as comfort-first off-pitch pieces for pre- and post-match travel.

adidas and Arsenal have launched the next chapter of their collaboration with Stella McCartney, by revealing the first away kit and travel range for Arsenal Women.

The limited-edition range is designed to support Arsenal Women both on and off the pitch and includes a range of structured silhouettes including a jersey, shorts and stylish travel wear pieces such as a full zip jacket with neon accents, track-style pants, and an oversized tee. As the hero piece of the collection, the striking away shirt takes centre stage thanks to the fusion of geometric patterns with color-blocking accents of halo pink and glow blue. The shirt also features AEROREADY technology, which uses sweat-wicking and absorbent materials to keep players feeling dry.

  • The new high-performance away kit design blends bold geometric prints with shades of halo pink and soft, pastel glow blue, pushing the boundaries of on-pitch sport style.
  • The limited-edition range includes a gender-neutral game-day match shirt as well as comfort-first off-pitch pieces for pre- and post-match travel.

adidas and Arsenal have launched the next chapter of their collaboration with Stella McCartney, by revealing the first away kit and travel range for Arsenal Women.

The limited-edition range is designed to support Arsenal Women both on and off the pitch and includes a range of structured silhouettes including a jersey, shorts and stylish travel wear pieces such as a full zip jacket with neon accents, track-style pants, and an oversized tee. As the hero piece of the collection, the striking away shirt takes centre stage thanks to the fusion of geometric patterns with color-blocking accents of halo pink and glow blue. The shirt also features AEROREADY technology, which uses sweat-wicking and absorbent materials to keep players feeling dry.

Key pieces are crafted with at least 47% recycled polyester and 100% organic cotton as part of adidas' ambition to help end plastic waste.

 

More information:
adidas Stella McCartney Sportswear
Source:

adidas AG

06.10.2023

Acteev erweitert Angebot für geruchshemmende und medizinische Textilien

Die Acteev® Textiltechnologie, eine Tochtergesellschaft der Ascend Performance Materials,  wächst über ihre Anti-Geruchs-Wurzeln hinaus. Ein neues, hochzähes Nylon, eine antistatische Faser und ein zertifiziertes biobasiertes Nylon ergänzen das Angebot zur Geruchsbekämpfung.

Die Flaggschiffprodukte der Marke tragen jetzt die Bezeichnung Acteev FREE. Sie ermöglichen die Fertigung von Sport- und Freizeit-, Outdoor-, Dessous- und weiteren Bekleidungsartikeln mit geruchshemmenden Stoffen. Acteev FREE lässt sich mit anderen Fasern zu ganz spezifischen Mischungen kombinieren und uneingeschränkt einfärben.

Acteev TOUGH ist eine hochzähe Nylon 6,6-Stapelfaser mit niedrigem DPF, die für strapazierfähige Anwendungen wie Arbeitskleidung, Schuhwerk, Rucksäcke, Gurte und Kletterseile entwickelt wurde. Sie eignet sich für robuste Textilwaren aller Art, von Industrieoveralls bis hin zu taktischer Ausrüstung für Militär und Polizeibehörden. Als Stapelfaser in Mischungen für Unterwäsche verträgt sie sich gut mit Baumwolle und Wolle in Artikeln, die eine gleichmäßige Färbung erfordern.

Die Acteev® Textiltechnologie, eine Tochtergesellschaft der Ascend Performance Materials,  wächst über ihre Anti-Geruchs-Wurzeln hinaus. Ein neues, hochzähes Nylon, eine antistatische Faser und ein zertifiziertes biobasiertes Nylon ergänzen das Angebot zur Geruchsbekämpfung.

Die Flaggschiffprodukte der Marke tragen jetzt die Bezeichnung Acteev FREE. Sie ermöglichen die Fertigung von Sport- und Freizeit-, Outdoor-, Dessous- und weiteren Bekleidungsartikeln mit geruchshemmenden Stoffen. Acteev FREE lässt sich mit anderen Fasern zu ganz spezifischen Mischungen kombinieren und uneingeschränkt einfärben.

Acteev TOUGH ist eine hochzähe Nylon 6,6-Stapelfaser mit niedrigem DPF, die für strapazierfähige Anwendungen wie Arbeitskleidung, Schuhwerk, Rucksäcke, Gurte und Kletterseile entwickelt wurde. Sie eignet sich für robuste Textilwaren aller Art, von Industrieoveralls bis hin zu taktischer Ausrüstung für Militär und Polizeibehörden. Als Stapelfaser in Mischungen für Unterwäsche verträgt sie sich gut mit Baumwolle und Wolle in Artikeln, die eine gleichmäßige Färbung erfordern.

Acteev CLEAN ist eine Faser mit antistatischen, haar-, staub- und flusenabweisenden Eigenschaften für Kleidung und textile Haushaltswaren wie Polstermöbel. Ihre Funktionalität ist in die Faser selbst eingebettet und erfordert keinerlei nachträgliche oder chemische Behandlung, was Acteev CLEAN für hautnah getragene Anwendungen prädestiniert. Die Faser ist schon bei geringer Beimischung wirksam, kann mit anderen Fasern zu Garnen versponnen werden und bietet dennoch eine statikfreie Leistung.

Acteev BIOSERVE ist ein aus pflanzlichen Quellen gewonnenes Nylon, das darauf ausgerichtet ist, die Nachhaltigkeitsziele von Markeninhabern ohne Leistungseinbußen zu unterstützen.

Darüber hinaus umfasst das Angebot Acteev MED, eine Produktlinie mit diversen Formfaktoren, darunter Fasern für hautnahe Anwendungen wie Kompressionsbekleidung sowie für Vliesstoffe zur feuchtigkeitsregulierenden Wundversorgung und für Wundnahtfilamente.

Jedes Produkt im Acteev Portfolio ist auch in einer CO2-Fußabdruck reduzierten Ausführung lieferbar.

Source:

Ascend Performance Materials

Manjushree Group enters Indian nonwovens market with Reifenhäuser Reicofil line (c) Reifenhäuser GmbH & Co. KG Maschinenfabrik
06.10.2023

Manjushree Group enters Indian nonwovens market with Reifenhäuser Reicofil line

After four decades in the packaging industry, the Manjushree Group is entering the Indian nonwovens market. The entrepreneurs rely on a flexible RF Smart Composite line from Reifenhäuser Reicofil to meet very different customer requirements.

The Manjushree Group operated a blown film line for packaging materials for the tea industry in the eastern part of India as early as 1983. In the years that followed, Manjushree Technopack Ltd. developed into one of the largest suppliers of solutions for rigid plastic products in South Asia - and the family business grew into a group with several business segments. In 2018, the entrepreneurial family repositioned itself: it sold its previous core business to a financial investor and established Manjushree Ventures with footholds in start-up financing, real estate business, and manufacturing - the largest of which is Manjushree Spntek as a producer of high-quality spunmelted fabrics.

After four decades in the packaging industry, the Manjushree Group is entering the Indian nonwovens market. The entrepreneurs rely on a flexible RF Smart Composite line from Reifenhäuser Reicofil to meet very different customer requirements.

The Manjushree Group operated a blown film line for packaging materials for the tea industry in the eastern part of India as early as 1983. In the years that followed, Manjushree Technopack Ltd. developed into one of the largest suppliers of solutions for rigid plastic products in South Asia - and the family business grew into a group with several business segments. In 2018, the entrepreneurial family repositioned itself: it sold its previous core business to a financial investor and established Manjushree Ventures with footholds in start-up financing, real estate business, and manufacturing - the largest of which is Manjushree Spntek as a producer of high-quality spunmelted fabrics.

Since February 2023, Manjushree Spntek has been producing high-performance spunmelts on an RF Smart Composite line from Reifenhäuser Reicofil - benefiting both from many years of experience in the packaging industry and from experience with Reifenhäuser's blown film lines. "We know a lot about plastic extrusion, for example when it comes to line operating parameters such as temperature and pressure. Processing is similar in both industries," explains Rajat Kedia. "The main difference is the distribution of the products: In plastic packaging, we had an established customer base and sold a lot of material to the big consumer goods manufacturers. The nonwovens market in India, on the other hand, is still forming, with thousands of small companies currently getting involved." These serve customers in their regions, such as hospitals.

The RF Smart Composite line is a standardized spunmelt line for smaller and emerging markets. The line produces nonwovens of the highest Reicofil quality with appropriately adapted throughput. This makes it ideally suited for applications in hygiene and medical technology and, with typically 8,200 annual production hours, it is extremely reliable. In addition, operators can start production quickly because in many cases the line can be integrated into existing buildings.

Before production could start, Manjushree built a new production building in Bidadi, a town an hour's drive from Bangalore International Airport. The building is designed to be sustainable: It uses natural light and fresh air, has comprehensive contamination control, and obtains almost all of its energy from renewable sources. Reifenhäuser Reicofil then installed, commissioned and tested the RF Smart Composite line.

Since February 2023, Manjushree Spntek has been producing high-quality spunmelted nonwovens, including ultra-soft fabrics and fabrics with special coatings for customers in the hygiene and medical industries. The material can be used, for example, for baby diapers and feminine hygiene products, but also for medical articles ranging from surgical gowns to surgical drapes.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

Carbios: Polyester recycling with new textile preparation line (c) Carbios
04.10.2023

Carbios: Polyester recycling with new textile preparation line

Carbios inaugurated its textile preparation line at its demonstration plant in Clermont-Ferrand, in the presence of Mr. Lescure, French Minister for Industry. To streamline the textile preparation phase, which is currently carried out by hand or on several lines, Carbios has developed a fully integrated and automated line that transforms textile waste from used garments or cutting scraps into raw material suitable for depolymerization with its enzymatic biorecycling process. This patented line integrates all preparation stages (shredding and extraction of hard points such as buttons or fasteners), and provides Carbios with a high-performance, scalable development tool. The platform will help validate the biorecycling technology for textiles at demonstration plant scale (by 2024), and provides Carbios with expertise in working with collection and sorting operators to specify the quality of textiles and the preparation steps needed to make them suitable for enzymatic recycling. This expertise will also be invaluable to brands in the eco-design of their products.

Carbios inaugurated its textile preparation line at its demonstration plant in Clermont-Ferrand, in the presence of Mr. Lescure, French Minister for Industry. To streamline the textile preparation phase, which is currently carried out by hand or on several lines, Carbios has developed a fully integrated and automated line that transforms textile waste from used garments or cutting scraps into raw material suitable for depolymerization with its enzymatic biorecycling process. This patented line integrates all preparation stages (shredding and extraction of hard points such as buttons or fasteners), and provides Carbios with a high-performance, scalable development tool. The platform will help validate the biorecycling technology for textiles at demonstration plant scale (by 2024), and provides Carbios with expertise in working with collection and sorting operators to specify the quality of textiles and the preparation steps needed to make them suitable for enzymatic recycling. This expertise will also be invaluable to brands in the eco-design of their products.

Current collection, sorting and preparation infrastructures limit the amount of textile waste available for “fiber-to-fiber” recycling. Collection rates average around 15-25% worldwide[1], and much of the waste collected is exported to Africa, Asia or Latin America for sorting.

Moreover, textiles are highly complex materials, with yarns of different composition (or nature) that are difficult, if not impossible, to physically separate. However, the highly selective enzyme developed by Carbios can specifically depolymerize the PET (polyester) present in textile material.

At present, textiles are sorted and prepared mainly by hand, with low yields, particularly for disruptors to recycling processes such as “hard points” (zips, buttons, etc.). To optimize this crucial phase, Carbios is contributing a textile preparation solution to accelerate the development of biorecycling in the textile industry. Enzymatic recycling, or biorecycling, therefore contributes to the construction of a textile recycling chain and the acceleration of textile circularity, also enabling brands to do away with used bottles.

[1] Ellen MacArthur Foundation, 2017

Source:

Carbios

Bac Mono Photo Hypetex
22.09.2023

Hypetex: Coloured carbon fibre replacing paint coating

•    First production supercar created with Hypetex coloured carbon fibre
•    Paint-replacement technology reduces weight to enhance performance

British car manufacturer Briggs Automotive Company (BAC) has created a unique Hypetex coloured carbon fibre version of its Mono R, reducing the weight by removing the need for paint.  

The original BAC Mono R was created to be lighter and more powerful than the standard model, with 343bhp and 555kg total weight, equating to a power-to-weight ratio of 618bhp-per-tonne. By removing the need for paint coatings in this version, the net weight of the exterior is reduced compared to a painted shell, resulting in a further improved overall performance.

The car’s body was created using Hypetex’s titanium carbon fibre twill, and finished with a crystalized lacquer, offering a unique aesthetic finish. The ultra-lightweight supercar can accelerate from zero to 60mph in less than 2.5 seconds.  

•    First production supercar created with Hypetex coloured carbon fibre
•    Paint-replacement technology reduces weight to enhance performance

British car manufacturer Briggs Automotive Company (BAC) has created a unique Hypetex coloured carbon fibre version of its Mono R, reducing the weight by removing the need for paint.  

The original BAC Mono R was created to be lighter and more powerful than the standard model, with 343bhp and 555kg total weight, equating to a power-to-weight ratio of 618bhp-per-tonne. By removing the need for paint coatings in this version, the net weight of the exterior is reduced compared to a painted shell, resulting in a further improved overall performance.

The car’s body was created using Hypetex’s titanium carbon fibre twill, and finished with a crystalized lacquer, offering a unique aesthetic finish. The ultra-lightweight supercar can accelerate from zero to 60mph in less than 2.5 seconds.  

Hypetex’s paint-replacement technology retains the visible weave, allowing for a bold design and a choice of colours without technical compromises, perfectly aligning with BAC’s initiatives to maximise performance whilst creating bespoke supercars. Paint generally adds 138 grams per metre squared, whereas Hypetex adds just 17 grams for the same area, offering an 8x weight saving.
This bespoke version of BAC’s single-seater Mono R was subject to BAC’s renowned BAC Bespoke programme, which ensures that no two Monos are the same. The client, a US-based collector, worked with BAC’s design team to design the car to their personal taste.   

Born out of Formula 1 technology, Hypetex offers manufacturers sustainable aesthetic materials with technical and efficiency benefits. This collaboration is an all-British success story, with the Hypetex carbon fibre body built by Formaplex, a leading UK-based manufacturing company who manufacture lightweight engineered solutions for top tier customers in Automotive, Aerospace and Defence markets. BAC’s supply chain is 95% UK-based.  

Hypetex continues to expand its growing portfolio of the use of coloured carbon fibre to add personalisation to the automotive field, with its material recently featured on the 2024 Ford Mustang Dark Horse.  

 

More information:
HYPETEX® carbon fibers
Source:

Hypetex

AGU’s HeiQ Smart Temp cycling kits at three Grand Tours Photo: AGU
Jumbo-Visma team winning at Vuelta a España with AGU’s HeiQ Smart Temp cycling kits
22.09.2023

AGU’s HeiQ Smart Temp cycling kits at three Grand Tours

Team Jumbo-Visma’s triumphant victories in Europe’s three Grand Tours of cycling, including the recent Vuelta a España, were supported by AGU’s cycling kits that are powered by the HeiQ Smart Temp thermoregulation technology.

HeiQ celebrates its collaboration with AGU, a high-performance sports gear manufacturer. Together, the companies integrated HeiQ Smart Temp technology into the jerseys of Jumbo-Visma, the triumphant team whose outstanding cyclists Jonas Vingegaard, Primoz Roglic, and Sepp Kuss won Europe’s three Grand Tours; the Tour de France, Giro d’Italia, and Vuelta a España.

HeiQ Smart Temp, an innovative thermoregulation solution, dynamically responds to body heat and moisture, providing cyclists with a cooling effect when they need it most. This technology enhances comfort and performance, making it ideal for next-to-skin apparel, sportswear, and activewear.

AGU's product developers harnessed the power of HeiQ Smart Temp to create jerseys with cooling properties. The Jumbo-Visma team's lightest-weight jersey, weighing 25% less than their regular aero shirt, keeps athletes up to 2.5°C cooler than other performance fabrics.

Team Jumbo-Visma’s triumphant victories in Europe’s three Grand Tours of cycling, including the recent Vuelta a España, were supported by AGU’s cycling kits that are powered by the HeiQ Smart Temp thermoregulation technology.

HeiQ celebrates its collaboration with AGU, a high-performance sports gear manufacturer. Together, the companies integrated HeiQ Smart Temp technology into the jerseys of Jumbo-Visma, the triumphant team whose outstanding cyclists Jonas Vingegaard, Primoz Roglic, and Sepp Kuss won Europe’s three Grand Tours; the Tour de France, Giro d’Italia, and Vuelta a España.

HeiQ Smart Temp, an innovative thermoregulation solution, dynamically responds to body heat and moisture, providing cyclists with a cooling effect when they need it most. This technology enhances comfort and performance, making it ideal for next-to-skin apparel, sportswear, and activewear.

AGU's product developers harnessed the power of HeiQ Smart Temp to create jerseys with cooling properties. The Jumbo-Visma team's lightest-weight jersey, weighing 25% less than their regular aero shirt, keeps athletes up to 2.5°C cooler than other performance fabrics.

Source:

HeiQ Materials AG

Flachs-Koeper-Band (c) vombaur
Flachs-Koeper-Band
20.09.2023

Technical textiles made of natural fibres: Sustainable textiles for lightweight design

The combination of high strength and rigidity with sustainability and a neutral carbon footprint makes flax the ideal raw material for natural fibre-reinforced plastics. vombaur offers composite textiles made of this natural fibre for the automotive, wind power, construction or sports industries and many other sectors.

Flax fibres are rigid and tear-proof. They have natural bactericidal properties, are virtually antistatic, stain resistant and easy to spin. Humans have taken advantage of these properties to manufacture robust, stain-resistant and lint-free textiles. Between the late 19th and late 20th centuries, cotton largely replaced natural fibres. Because flax can be grown in Europe and consumes less energy and water than cotton production, the material's importance is currently growing again, for both clothing and composites. Regional textile value added chains in Europe – flax makes them possible.

The combination of high strength and rigidity with sustainability and a neutral carbon footprint makes flax the ideal raw material for natural fibre-reinforced plastics. vombaur offers composite textiles made of this natural fibre for the automotive, wind power, construction or sports industries and many other sectors.

Flax fibres are rigid and tear-proof. They have natural bactericidal properties, are virtually antistatic, stain resistant and easy to spin. Humans have taken advantage of these properties to manufacture robust, stain-resistant and lint-free textiles. Between the late 19th and late 20th centuries, cotton largely replaced natural fibres. Because flax can be grown in Europe and consumes less energy and water than cotton production, the material's importance is currently growing again, for both clothing and composites. Regional textile value added chains in Europe – flax makes them possible.

Ideal mechanical properties
vombaur makes the mechanical properties of flax usable for lightweight design. Because flax fibres are particularly rigid and tear-resistant, they ensure great stability in natural fibre-reinforced plastics (NFRPs). And thanks to their low density of 1.50 g/cm3, the fibres weigh virtually nothing. On top of this, fibre-reinforced plastics are less prone to splintering than glass fibre-reinforced plastics.

Excellent carbon footprint
The cultivation of flax binds CO2 and the production of natural fibre-reinforced plastics (NFRPs) generates approximately one third less CO2 emissions compared with conventional fibre-reinforced plastics. Energy consumption is substantially lower. This saves resources. The use of flax fibre tapes by vombaur in lightweight design applications also improves the product's carbon footprint and contributes to a secure, regional supply chain.

Recycling without impacting on quality
Flax offers another sustainability benefit: more recycling cycles than glass- or carbon fibre-reinforced plastics – without impacting on quality. Thermoplastic fibre-matrix prepregs are melted and reused in the recycling process. The natural fibres can be used in other products such as natural fibre-reinforced injection moulded parts.

Sustainable product developments for many industries
"Orthoses for high-performance sports, high-tech skis, wind turbines, components for the automotive industry or aerospace, but also modern window profiles – the application scope for our lightweight design flax tapes is amazingly diverse", as Carl Mrusek, Chief Sales Officer at vombaur explains. "After all, wherever flax tapes are used, three key properties come together: light weight, strength and sustainability".

More information:
CO2
Source:

vombaur

20.09.2023

Stahl: Second consecutive Platinum EcoVadis rating

Stahl, a leading provider of coating technologies for flexible substrates, has been awarded a Platinum rating by the sustainability rating agency EcoVadis for the second consecutive year. For the 2023 EcoVadis assessment, Stahl’s rating increased by three points compared to its 2022 score, reflecting the company’s improved performance in the area of labour and human rights.

Stahl, a leading provider of coating technologies for flexible substrates, has been awarded a Platinum rating by the sustainability rating agency EcoVadis for the second consecutive year. For the 2023 EcoVadis assessment, Stahl’s rating increased by three points compared to its 2022 score, reflecting the company’s improved performance in the area of labour and human rights.

Progress in the Labour & Human Rights category
The 2023 EcoVadis assessment revealed the progress Stahl is making in the Labour & Human Rights category, where Stahl scored 90 out of a possible 100 points. This reflects the company's recent work to improve its health and safety management systems. In particular, the majority of Stahl’s global manufacturing sites are now ISO 45001 certified and more than 94% are ISO 14001 certified. Stahl has also taken steps to improve its approach to employee career development and well-being. These include the creation of an individual career plan for all employees and the introduction of a new company-wide employee satisfaction survey.
 
Stahl moves forward with 2030 ESG ambitions
Stahl has set a 2030 target to maintain its EcoVadis Platinum rating by working closely with its value chain partners to help them reduce their impact. In 2022, 83% of Stahl’s total spend on raw materials was sourced from EcoVadis-rated suppliers.

EcoVadis is a globally recognised, evidence-based rating platform that assesses the performance of more than 90,000 organisations against key sustainability criteria across four categories: Environment, Labour & Human Rights, Ethics and Sustainable Procurement. For the 2023 EcoVadis assessment, Stahl received an overall score of 80 out of 100, up from 77 in 2022. This score indicates an advanced level of sustainability maturity and ensures that Stahl retains its Platinum rating. This is awarded to the top 1% of companies assessed by EcoVadis. Stahl achieved its first Platinum rating in 2022, having undergone its first EcoVadis assessment in 2015.

More information:
EcoVadis Stahl
Source:

Stahl

Peschici yarn Photo Südwolle
19.09.2023

Südwolle: Spring/Summer 2025 Collection

The Südwolle collection of yarns for weaving and circular knitting continues its evolutionary path based on the key concept of Responsibility. This principle guides Südwolle Group's commitment and engagement regarding all areas of business and stakeholders - the environment, the textile industry production chain, consumers, employees and the social repercussions of its business.

The intersection between these 6 areas has resulted in a collection in which the concept of seasonality is blurred, and products have a flexible, versatile use. The use of cutting-edge technology means yarns offer a high level of quality, suitable for apparel with outstanding durability, a factor that helps to reduce the environmental impact of textile waste and disposable fashion.

The Südwolle collection of yarns for weaving and circular knitting continues its evolutionary path based on the key concept of Responsibility. This principle guides Südwolle Group's commitment and engagement regarding all areas of business and stakeholders - the environment, the textile industry production chain, consumers, employees and the social repercussions of its business.

The intersection between these 6 areas has resulted in a collection in which the concept of seasonality is blurred, and products have a flexible, versatile use. The use of cutting-edge technology means yarns offer a high level of quality, suitable for apparel with outstanding durability, a factor that helps to reduce the environmental impact of textile waste and disposable fashion.

Overview of the collection
The collection is divided into 4 themes.
Natural, biodegradable or recycled fibre blends intended for crepe and crinkled fabrics are characterized by substantial twist and a high level of performance. The selection of fibres is oriented towards sustainability, with wool and silk organze combined with LENZINGTM ECOVEROTM viscose and Q-NOVA® regenerated polyamide.

Fuji crepe X-compact Nm 40/1 Z 1050 (40% wool 21.2 μ, 60% FSC certified LENZINGTM viscose EV), new this season, features a smooth look and no pilling thanks to the use of X-compact spinning technology, which produces yarns with excellent performance and durability.

When it comes to light, natural blends, wool and linen or wool, linen and silk blends follow the trend for softly fluid structures, such as the new Peschici Nm 42/1 Z 600 (53% wool 18.4 μ, 23% linen, 24% silk), with a fresh, dry handle and very current dappled effect, which results from the skilful combination of different fibres.

Contributing to a more sustainable and traceable textile production also involves attention to all fibres used. Mohair used for luxury yarns in noble fibres is strictly RMS (Responsible Mohair Standard) certified, which traces its origin, guaranteeing animal welfare and production according to responsible standards, similar to the analogous RWS (Responsible Wool Standard) used for wool. Bosforo RWS RMS Nm 32/1 Z 950 (20% wool 20.8 μ RWS, 60% FSC certified LENZINGTM viscose EV, 20% RMS Kid Mohair) is a fresh, bright yarn that is soft on the skin, suitable for trans-seasonal products, an example of careful selection of raw materials.

Among the fancy yarns, delicately animated structures predominate for naturally elegant creations, represented by Niche Nm 34/2 S 460 (42% wool 21.2 μ, 58% bourette silk), a twisted yarn in wool and bourette silk, which adds dynamism with its characteristic rough, knotty surface.

More information:
Südwolle yarn
Source:

Suedwolle Group

14.09.2023

Rudolf commissions Baldwin’s TexCoat™ G4 lab-scale precision spray unit

Rudolf GmbH, a provider of chemicals to the textile industry, can now offer side-by-side performance tests of the age-old “dip and squeeze” pad versus precision spray finishing with the delivery of Baldwin Technology Inc.’s TexCoat ™ G4 lab-scale unit.

Rudolf GmbH, a provider of chemicals to the textile industry, can now offer side-by-side performance tests of the age-old “dip and squeeze” pad versus precision spray finishing with the delivery of Baldwin Technology Inc.’s TexCoat ™ G4 lab-scale unit.

The new TexCoat lab-scale unit at Rudolf’s Geretsried, Germany-based Customer Solution Center, tests the sprayability of chemicals on fabrics as an additional tool to help the market transition to precision spray with confidence in the performance and sustainability of the end result.
 
With Baldwin’s innovative system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates.
 
Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry. On wet-on-dry processes, the finish is applied with 50% of the amount of water required for pad finishing. Dryer fabric entering the stenter means less water to evaporate resulting in less energy and higher production speeds.
 
More specifically, with Baldwin’s TexCoat G4, textile finishers can track and control the finishing process. Changeovers are quickly performed thanks to recipe management, including automated chemistry and coverage selection. Furthermore, the system takes speed information from the drying process to insure exact coverage regardless of any change in speed. TexCoat G4 measures every drop of chemical usage ensuring that the amount of chemical add-on is precise.
 
In addition, the TexCoat G4 system can process a wide range of low-viscosity water-based chemicals, such as durable water-repellants including PFAS-free, softeners, anti-microbials, easy care resins, flame retardants and more. Baldwin’s technology utilizes the same chemicals used in the traditional pad bath, with no special auxiliaries required.

Source:

Baldwin Technology Company Inc.

adidas re-imagines football jerseys as streetwear (c) adidas AG
adidas Manchester United LFSTLR Collection
14.09.2023

adidas re-imagines football jerseys as streetwear

adidas launches its new LFSTLR jersey collection, featuring the season 23/24 third jerseys of some its leading clubs, re-imagined as fashion-focused, lifestyle streetwear.

LFSTLR blurs the lines between football performance and streetwear culture, re-defining what it means to represent your club away from the terraces. The collection includes adaptations of the third jerseys of Arsenal, FC Bayern Munich, Juventus, Manchester United and Real Madrid, retaining the overall design blueprint of the authentic on-pitch and fan versions but with a focus on wearability and comfort over pure performance for the field of play.

Each jersey is made with an elevated base material, including heavier superior fabrics for additional comfort as well as featuring a more premium trim execution and detailing to truly ramp up the style factor. The application of a tonal adidas badge gives each jersey a clean, crisp look that gives the club crests additional prominence. Between 70-100% of the materials used in each jersey are from recycled or renewable sources.

adidas launches its new LFSTLR jersey collection, featuring the season 23/24 third jerseys of some its leading clubs, re-imagined as fashion-focused, lifestyle streetwear.

LFSTLR blurs the lines between football performance and streetwear culture, re-defining what it means to represent your club away from the terraces. The collection includes adaptations of the third jerseys of Arsenal, FC Bayern Munich, Juventus, Manchester United and Real Madrid, retaining the overall design blueprint of the authentic on-pitch and fan versions but with a focus on wearability and comfort over pure performance for the field of play.

Each jersey is made with an elevated base material, including heavier superior fabrics for additional comfort as well as featuring a more premium trim execution and detailing to truly ramp up the style factor. The application of a tonal adidas badge gives each jersey a clean, crisp look that gives the club crests additional prominence. Between 70-100% of the materials used in each jersey are from recycled or renewable sources.

adidas worked with each club to appoint a Creative Lead, tapping into the worlds of fashion and music, and ensuring the unique flair of each team came through with bespoke individuality:

  • Arsenal linked up with Grammy-award winning rapper, Pusha T
  • FC Bayern collaborated with Achraf, one of the hottest names in the German fashion and music industry
  • Juventus called upon Italian style with fashion photographer Giampaolo Sgura
  • Manchester United teamed up with Nigerian Afropop singer-songwriter, Adekunle Gold & Manchester’s The KTNA
  • Real Madrid worked with renowned Mexican rapper, Alemán 
More information:
adidas Sportswear Jersey
Source:

adidas AG

Santoni Shanghai acquires German circular knitting machinery maker Terrot (c) Santoni / Terrot
13.09.2023

Santoni Shanghai acquires German circular knitting machinery maker Terrot

Santoni Shanghai Knitting Machinery Co., Ltd. announced the strategic acquisition of Terrot GmbH, a manufacturer of circular knitting machines based in Chemnitz, Germany. The move comes as the latest development in Santoni Shanghai’s long-term vision to build an ecosystem that aims to reshape and consolidate the circular knitting industry. The transaction will be finalized pending approval from Chinese regulatory authorities.

The global circular knitting machine market is expected to see significant growth in the coming years, with a July 2023 report from Consegic Business Intelligence forecasting a 5.7% CAGR from 2023 to 2030, propelled by an increasing consumer preference for breathable and comfortable knitted fabrics as well as increasingly diversification of demand for knitted apparel. To seize this market opportunity, Santoni Shanghai has developed an ambitious strategic plan centered around innovation, sustainability and digitalization. The new partnership with Terrot aims to further this strategy by enhancing Santoni’s integrated and scaled-up ecosystem, while also driving the sustainable development of the global knitting machinery industry.

Santoni Shanghai Knitting Machinery Co., Ltd. announced the strategic acquisition of Terrot GmbH, a manufacturer of circular knitting machines based in Chemnitz, Germany. The move comes as the latest development in Santoni Shanghai’s long-term vision to build an ecosystem that aims to reshape and consolidate the circular knitting industry. The transaction will be finalized pending approval from Chinese regulatory authorities.

The global circular knitting machine market is expected to see significant growth in the coming years, with a July 2023 report from Consegic Business Intelligence forecasting a 5.7% CAGR from 2023 to 2030, propelled by an increasing consumer preference for breathable and comfortable knitted fabrics as well as increasingly diversification of demand for knitted apparel. To seize this market opportunity, Santoni Shanghai has developed an ambitious strategic plan centered around innovation, sustainability and digitalization. The new partnership with Terrot aims to further this strategy by enhancing Santoni’s integrated and scaled-up ecosystem, while also driving the sustainable development of the global knitting machinery industry.

“With the strategic investment of Santoni, we aim to strengthen our position as the preferred solution provider to many of the world’s leading textile manufacturers and top brands as well as continue working with industry talents as we provide valuable and essential know-how to drive premium ‘Made in Germany’ textile machinery.” said Robert Czajkowski, Managing Director of Terrot GmbH. "We have found a strong, globally active partner with clear dedication to quality, performance and excellent expertise in all circular knitting segments, who understands the unique value proposition and potentials of our portfolio and with whom we can realize our growth objectives” he added.

Source:

Terrot GmbH

OCSiAl: New Graphene nanotube facility in Europe (c) OCSiAl Group
13.09.2023

OCSiAl: New Graphene nanotube facility in Europe

OCSiAl, a leader in graphene nanotube technologies, has been granted a construction permit for a nanotube production facility near Belgrade, Serbia. The new nanotube synthesis plant will be launched in 2024 and will have an initial annual capacity of 60 tonnes of graphene nanotubes. Over the next two years, the capacity of this plant will be increased to 120 tonnes per year. “The project will facilitate logistics and lower supply chain costs. European-produced nanotubes and nanotube derivatives will be primarily supplied to our customers in central and western Europe, North America, and Asia,” said OCSiAl Group Senior Vice President Gregory Gurevich.
 

OCSiAl, a leader in graphene nanotube technologies, has been granted a construction permit for a nanotube production facility near Belgrade, Serbia. The new nanotube synthesis plant will be launched in 2024 and will have an initial annual capacity of 60 tonnes of graphene nanotubes. Over the next two years, the capacity of this plant will be increased to 120 tonnes per year. “The project will facilitate logistics and lower supply chain costs. European-produced nanotubes and nanotube derivatives will be primarily supplied to our customers in central and western Europe, North America, and Asia,” said OCSiAl Group Senior Vice President Gregory Gurevich.
 
In addition to synthesizing nanotubes, the facility will manufacture nanotube suspensions for lithium-ion battery manufacturers in Europe, the US, and Asia – enough to enhance the performance of more than 1 mln electric cars with an average battery capacity of 75 kWh per car. OCSiAl nanotubes create long and robust electrical networks between active material particles, improving key battery characteristics, including cycle life, lower DCR, C-rate performance, and cohesion between active battery material particles, making the battery electrodes more durable. Graphene nanotubes unlock new battery technologies, including high-silicon content anodes, thick LFP cathodes, fast-charging graphite anodes, and more. They can be applied in both conventional and emerging battery tech, such as a dry battery electrode coating process, and solid-state batteries.
 
As well as synthesizing nanotubes and producing suspensions, OCSiAl project includes manufacturing of nanotube concentrates for high-performance polymers. The project has passed environmental impact assessment and it is 100% powered by green energy. It enjoys support from Serbian municipal and national governments. The plant is planned to be certified in accordance with ISO 9001, ISO 14001, and ISO 45001, and to be compliant with the IATF 16949 automotive industry standard. The project will create more than 200 job opportunities for engineers, scientists, managers, operators, and administrative staff.
 
Currently, OCSiAl has an extensive manufacturing system of nanotube-based products in the regions of highest market demand, such as China, Japan, Sri Lanka, Brazil, Malaysia, and other countries. The Serbia nanotube hub will operate in conjunction with the company’s operational R&D center and planned graphene nanotube synthesis facility in Luxembourg.

Source:

OCSiAl Group

Brembo SGL Carbon Ceramic Brakes expands production capacity (c) SGL CARBON SE
13.09.2023

Brembo SGL Carbon Ceramic Brakes expands production capacity

SGL Carbon and Brembo agreed to expand production capacities for the joint venture Brembo SGL Carbon Ceramic Brakes (BSCCB). Both companies have been working together with BSCCB on the conditions and implementation plans for this in the preceding months. BSCCB will invest around €150 million until 2027 to expand by more than 70% production capacities at the sites in Meitingen (Germany) and Stezzano (Italy).

The capacity enlargement includes the construction of two new production facilities at the SGL Carbon Meitingen site with a total area of around 8,500 m² and the installation of new production machinery. The groundbreaking in Meitingen will take place this fall.

At the Stezzano site, production areas will be extended by around 4.000 m² to existing buildings and investments will be made in new production machinery.

SGL Carbon and Brembo agreed to expand production capacities for the joint venture Brembo SGL Carbon Ceramic Brakes (BSCCB). Both companies have been working together with BSCCB on the conditions and implementation plans for this in the preceding months. BSCCB will invest around €150 million until 2027 to expand by more than 70% production capacities at the sites in Meitingen (Germany) and Stezzano (Italy).

The capacity enlargement includes the construction of two new production facilities at the SGL Carbon Meitingen site with a total area of around 8,500 m² and the installation of new production machinery. The groundbreaking in Meitingen will take place this fall.

At the Stezzano site, production areas will be extended by around 4.000 m² to existing buildings and investments will be made in new production machinery.

The extensive expansion of production capacities will enable Brembo SGL Carbon Ceramic Brakes (BSCCB) to meet the high market demand and to cover the increasing customer requests in the future. The need for carbon ceramic brake discs from BSCCB increased worldwide. This is mainly due to the high product quality and performance of carbon ceramic brake discs, which meet the specific requirements of automotive manufacturers, especially in the premium and luxury segments, where high braking performance is needed.

Source:

SGL CARBON SE