From the Sector

• 18+ metric tons of aniline are estimated to have been removed from the denim supply chain in about 3 years⁽²⁾.
• That represents 300'000'000+ pairs of jeans free of aniline, with 18'000+ garment workers, and aquatic life, protected from its toxicity⁽²⁾.

Archroma celebrates nearly 3 years of successfully converting the denim industry to aniline-free⁽¹⁾ pre-reduced liquid indigo.

Archroma launched its aniline-free⁽¹⁾ Denisol^® Pure Indigo in May 2018⁽³⁾.

Aniline is a key ingredient to make the indigo molecule. Unfortunately, during this process some aniline impurities are carried through into the indigo dyestuff. When the indigo is dyed on the fabric, a lot of the aniline impurity is locked into the pigment in the fabric. The remainder of the aniline impurity, approximately 300 metric tons annually, is discharged during dyeing. This can be an issue as aniline is toxic to aquatic life. In addition, exposure levels to factory workers can be high. The new Denisol^® Pure Indigo 30 liq was therefore developed as an aniline-free⁽¹⁾ indigo solution for designers, manufacturers and brand owners who long for authentic indigo inspiration.

Since the launch of Denisol^® Pure Indigo, several denim manufacturers, such as front-runner Absolute Denim, as well as Advance Denim, Azgard 9, Kilim Group, Nuevo Mundo, Rantex, Shasha Denim and Tuong Long, have taken the matter in their hands and converted their production or dedicated lines to aniline-free denim to brands and retailers.

The innovation is also supported by denim partners such as Be Disobedient and The Denim Window.

Archroma evaluates that, based on the total quantity of Denisol^® Pure Indigo sold until its introduction, its partners helped remove almost 18 metric tons of aniline from the denim supply chain. That represents an equivalent to about 300’000’000 pairs of jeans free of aniline and more than 18’000 garment workers protected from its toxicity⁽²⁾.

(1) Below limits of detection according to industry standards (tested & proven).
(2) Based on 15 minutes of work to produce one pair of jeans, produced over 8-hour working days and 300 working weeks per year.
(3) For the launch press release, click here.

• Carnet by Ratti Group teams up with Bemberg™ for its ultimate collection of premium, exclusive, responsible lining fabrics

Bemberg™ smart-tech fibers interweave circular economy into the new ‘bunch’ of lining textiles by the renowned fabric manufacturer which partners with tailors, designers and brands to bring style e and responsibility in the made-to-measure menswear and womenswear contemporary wardrobe.
 
The new ‘bunch’ of Bemberg™ fabrics for high-quality linings comprises 59 references that come in vibrant and contemporary colors. The collection reflects Carnet’s constant quest for exclusivity as well as a new vision for the future, thanks to Bemberg™ precious ingredient. “Because there is no style without sustainability” comments Ettore Pellegrini of Asahi Kasei Fibers Italia which supplies Bemberg™ by Asahi Kasei the world-leading materials manufacturer.

Bemberg™ smart-tech fibers interweave circular economy into the new ‘bunch’ of lining textiles by the renowned fabric manufacturer which partners with tailors, designers and brands to bring style e and responsibility in the made-to-measure menswear and womenswear contemporary wardrobe.
 
The new ‘bunch’ of Bemberg™ fabrics for high-quality linings comprises 59 references that come in vibrant and contemporary colors. The collection reflects Carnet’s constant quest for exclusivity as well as a new vision for the future, thanks to Bemberg™ precious ingredient. “Because there is no style without sustainability” comments Ettore Pellegrini of Asahi Kasei Fibers Italia which supplies Bemberg™ by Asahi Kasei the world-leading materials manufacturer.

Bemberg™ is the high-tech ingredient born from the transformation of cotton linters through a full circular, transparent and entirely traceable process. The result is a high-performing unique and precious fiber with anti-static and humidity-control properties. “By choosing to work with Bemberg™, we injected sustainability in the collection in order to offer ‘the best quality chance’ to tailors, designers, brands, and garment makers who believe in and commit to responsible yet premium and exclusive fashion.” Adds Alessandro Ivaldi, Business director at Carnet by Ratti Group.
 
Carnet is a division of the Ratti Group that manufactures and distributes the best fabrics all over the world for the realization of made-to-measure garments for both men and women. In each collection, Carnet’s fabrics are able to show the experience of those who know the code of style. A wide range of exclusives bases, Carnet offers high-end meter fabrics for both men and women.
 
The new Carnet’s  Bemberg™ fabrics for lining range is also available online with over 300.000 metres of fabric that can be purchased with a minimum order of just 50 cm, with delivery granted within 72 hours in over 50 countries.

• Swiss weaving machinery manufacturers are in the forefront of novel application development

Shoes and electronic calculators are probably not the first products people would associate with the textile weaving process. But they certainly signpost the future for woven fabrics, as two examples of the ever-wider possibilities of latest technology in the field. Fashion and function already combine in the increasing popularity of woven fabrics for shoes, and this is a present and future trend. Calculators in fabrics? That’s another story of ingenious development, using so-called ‘meander fields’ on the back and keys printed on the front of the material.

These glimpses of the outlook for modern weavers are among the highlights of developments now being pioneered by Swiss textile machinery companies. All weaving markets require innovation, as well as speed, efficiency, quality and sustainability. Member firms of the Swiss Textile Machinery Association respond to these needs at every point in the process – from tightening the first thread in the warp to winding the last inch for fabric delivery. They also share a common advantage, with a leading position in the traditional weaving industry as well as the expertise to foster new and exciting applications.

Technology and research cooperation
The concept of a ‘textile calculator’ was developed by Jakob Müller Group, in cooperation with the textile research institute Thuringen-Vogtland. Müller’s patented MDW® multi-directional weaving technology is able to create the meander fields which allow calculator functions to be accessed at a touch. A novel and useful facility, which suggests limitless expansion.

Today, the latest woven shoes are appreciated for their precise and comfortable fit. They score through their durability, strength and stability, meeting the requirements of individual athletes across many sports, as well as leisurewear. Stäubli is well known as a leading global specialist in weaving preparation, shedding systems and high-speed textile machinery. Its jacquard machines offer great flexibility across a wide range of formats, weaving all types of technical textiles, lightweight reinforcement fabrics – and shoes.

It’s possible to weave new materials such as ceramics, mix fibers such as aramid, carbon and other, and produce innovative multi-layers with variable thicknesses. Such applications put special demands on weaving machines which are fulfilled by Stäubli high-performance TF weaving systems.

Great weaving results are impossible without perfect warp tension, now available thanks to the world-leading electronic warp feeding systems of Crealet. Some market segments in weaving industry today demand warp let-off systems which meet individual customer requirements. For example, the company has recognized expertise to understand that geotextile products often need special treatment, as provided by its intelligent warp tension control system. Individual and connective solutions are designed to allow external support via remote link. Crealet’s warp let-off systems are widely used in both ribbon and broadloom weaving, for technical textiles applied on single or multiple warp beams and creels.

Functional, sustainable, automated
Trends in the field of woven narrow fabrics are clearly focused on functionality and sustainability. The Jakob Müller Group has already embraced these principles – for example using natural fibers for 100% recyclable labels with a soft-feel selvedge. It also focuses as much as possible on the processing of recycled, synthetic materials. Both PET bottles and polyester waste from production are recycled and processed into elastic and rigid tapes for the apparel industry.

For efficient fabric production environments, it is now recognized that automated quality solutions are essential. Quality standards are increasing everywhere and zero-defect levels are mandatory for sensitive applications such as airbags and protective apparel.

Uster’s latest generation of on-loom monitoring and inspection systems offers real operational improvements for weavers. The fabric quality monitoring prevents waste, while the quality assurance system significantly improves first-quality yield for all applications. Protecting fabric makers from costly claims and damaged reputations, automated fabric inspection also removes the need for slow, costly and unreliable manual inspection, freeing operators to focus on higher-skilled jobs.

Smart and collaborative robotics (cobots) offer many automation possibilities in weaving rooms. Stäubli’s future oriented robotics division is a driver in this segment with first effective installations in warp and creel preparation.

Control and productivity
Willy Grob’s specialized solutions for woven fabric winding focus on reliable control of tension, keeping it constant from the start of the process right through to the full cloth roll. Continuous digital control is especially important for sensitive fabrics, while performance and productivity are also critical advantages. In this regard, the company’s large-scale batching units can provide ten times the winding capacity of a regular winder integrated in the weaving machine.

The customized concept by Grob as well as design and implementation result in great flexibility and functionality of the fabric winding equipment – yet another example of Swiss ingenuity in textile machinery.  
There is even more innovation to come in weaving – and in other segments – from members of the Swiss Textile Machinery Association in future! This confident assertion is founded on an impressive statistic: the 4077 years of experience behind the creative power of the association’s member firms. It’s proof positive that their developments grow out of profound knowledge and continuous research.

Paper Converting Machine Company (PCMC) is pleased to announce that Stan Blakney has accepted the position of President of its global operations. In addition to leading the company’s US business, as he has since February 2019, Blakney now will assume leadership of operations in Italy and Serbia as well.

Since Blakney joined PCMC, he has led the company’s expansion in flexographic-printing, bag-converting and hygiene solutions, while also continuing to drive growth in tissue converting and packaging.

The creation of this new role enables PCMC to further unify its operations worldwide and expand into new geographies across all of its markets. It also enhances aftermarket support globally for its customers.

“We’ve seen tremendous growth and opportunity with the introduction of STAX Technologies and Hudson-Sharp to the PCMC family in the last two years,” said Blakney. “As we continue to bring our teams closer together, we are able to build our capacity to provide unified industry-leading service in all regions of the world. This includes enhanced access to parts, aligned Industry 4.0 solutions and around-the-clock care. Our goal is to give our customers a strong global service organization, with the support they need to keep their businesses moving forward.”

Sateri, one of the world's largest producers of viscose fibre, is planning to expand its Lyocell production in China, with total planned annual capacity of up to 500,000 tonnes by 2025.

The first phase of this expansion kicked off recently with ground breaking works for a new 100,000 tonne facility in Changzhou, Jiangsu province. Another 100,000 tonne facility will be built in Nantong, Jiangsu province later this year. The Changzhou Lyocell facility is expected to commence production in the third quarter of 2022 and will create more than 800 jobs.

Sateri’s first foray into China’s Lyocell market was in May 2020 when its 20,000 tonne Lyocell production line in Rizhao, Shandong province commenced production. The same site houses a 5,000 tonne Lyocell pilot production line dedicated for the development of Lyocell application technology.

Allen Zhang, President of Sateri, said, “Sateri’s continued investment in Lyocell not only responds to the changing needs of the market and the textile industry but also supports China’s green development plans. It is also very much a part of Sateri’s 2030 Vision commitment to sustainable development where we actively seek to adopt a circular economy model through clean and closed-loop production technology and innovation.”

A natural and biodegradable fibre, Sateri’s Lyocell is made from wood pulp sourced from certified and sustainable plantations. It is manufactured using closed-loop technology, requiring minimal chemical input during the production process, and utilising an organic solvent that can be almost fully recovered and recycled.

In anticipation of strong demand for Lyocell in the coming years, Tom Liu, Sateri’s Vice President and General Manager of Lyocell and Nonwovens Business, said: "Customer-centricity is Sateri’s promise. The new expansion plans will enable us to extend our domestic and international market reach and provide our customers with high quality and comprehensive fibre products. At the same time, we will invest in technology improvement, application development, and brand collaboration to bolster the industry”.

• Michael Pieper is not standing for re-election
• Stefaan Haspeslagh will be proposed for election to the Board of Directors at the Annual General Meeting
• The change is related to the transfer of the shareholding of Artemis Beteiligungen I AG to Picanol Group

Michael Pieper, a member of the Board of Directors of Rieter Holding AG since 2009, has informed Rieter that Artemis Beteiligungen I AG has sold its 11.5% block of shares to the Picanol Group (Picanol NV), Belgium, and that he thus will not stand for re-election at the Annual General Meeting on April 15, 2021.

Michael Pieper has supported and helped to significantly shape the development of Rieter for more than ten years. He joined Rieter as a major shareholder in 2008, and since then has been strongly involved in the strategic realignment of the group.

“On behalf of the Rieter Group, I extend our sincere gratitude to Michael Pieper for his extremely successful and valuable work on the Board of Directors and, above all, for his commitment as a long-term major shareholder,” said Bernhard Jucker, Chairman of the Board of Directors of Rieter Holding AG.

The Board of Directors of Rieter Holding AG today announced its intention to propose Stefaan Haspeslagh for election to the Board of Directors at the Annual General Meeting on April 15, 2021.
Stefaan Haspeslagh (born 1958) holds a Master’s degree in Applied Economics from the University of Antwerp, Belgium. He has been Chairman of the Board of Directors and Chief Financial Officer of the Picanol Group (Picanol NV), Belgium, since 2010. In addition, Stefaan Haspeslagh has also been Chairman of the Board of Directors, Chief Operating Officer and Chief Financial Officer of the Tessenderlo Group NV, Belgium, since 2014. As a director of Cellpack NV, Belgium, he has been in office since 2001.

“Rieter welcomes the new major shareholder, Picanol NV. Luc Tack, majority shareholder and CEO of Picanol, has been a member of the Board of Directors of Rieter for four years. Stefaan Haspeslagh is characterized by broad, international management experience in the textile sector and is very well connected in the industry”, stated Bernhard Jucker, Chairman of the Board of Directors.

All other current members of the Board of Directors will stand for reelection at the Annual General Meeting.

DIE KEYNOTES:

• Klimawandel
• Transparente Lieferketten mit Tchibo
• Nachhaltige Unternehmensführung bei der Hugo Boss AG
• Die Sicht des Finanzsektors: Baumwolle und Risikomanagement

Die Internationale Baumwolltagung startet in wenigen Tagen. Während der am 17. und 18. März stattfindenden Konferenz tragen 80 Experten aus Wissenschaft und Praxis mit inspirierenden Vorträgen oder Diskussionsrunden zum Gelingen der virtuellen Tagung bei. Bisher haben sich an die 400 Teilnehmer aus über 30 Ländern zum Besuch der Tagung angemeldet. Wir freuen uns auf unsere Keynote Speaker, die jeden Morgen mit spannenden Statements und Vorträgen das Programm eröffnen. Die Keynotes werden von zwei Vertretern der Baumwollbranche moderiert, die langjährige Erfahrung im Handel mitbringen: Bill Ballenden, Gründer und Inhaber von Dragontree, UK, einer Online-Auktionsplattform für den Baumwollhandel und Fritz A. Grobien, Vizepräsident der Bremer Baumwollbörse.

Was ist mit dem Klimawandel?
„Klimawandel - ein Sturm im Wasserglas?“, fragt Kai Hughes am ersten Tagungstag. Er ist geschäftsführender Direktor des International Cotton Advisory Committee, Washington D.C., USA. Ziel seiner Präsentation ist es, die Herausforderungen des Klimawandels für die Landwirtschaft und insbesondere die Baumwollproduktion herauszuarbeiten. Darauf aufbauend sollen konkrete Handlungsansätze und Lösungen innerhalb der Baumwoll-Community diskutiert werden.

Lieferketten - welche Strategie gilt für Nachhaltigkeit?
Nanda Bergstein ist Director Sustainabilty bei der Tchibo GmbH, Hamburg, Deutschland. In ihrer Keynote stellt sie die Nachhaltigkeitsstrategie des Hamburger Familienunternehmens vor, das sich über den Kaffeehandel mit einem speziellen Vertriebskonzept zu einem der größten deutschen Konsumgüter- und Einzelhandelsunternehmen entwickelte. Schon 2006 entschied sich Tchibo zu 100 Prozent nachhaltig wirtschaften zu wollen. Das Unternehmen sieht im Aufbau transparenter Lieferketten große Chancen zur Erreichung seines Ziels.

Nachhaltigkeit und Unternehmensführung
Der Startschuss für den zweiten Tagungstag fällt mit einer Keynote von Heinz Zeller, Head of Sustainability & Logistics bei Hugo Boss. Die Hugo Boss AG, Metzingen, Deutschland, ist Produzent und Vertreiber der weltweit bekannten, im Premiumsegment angesiedelten Lifestylemarke Hugo Boss. Heinz Zeller zeigt in seinem Vortrag auf, warum Baumwolle für Hugo Boss weiterhin der wichtigste Rohstoff ist, thematisiert aber auch die spezifischen Herausforderungen. Warum ist Transparenz weiterhin wichtig, welche Erfahrungen machte das Unternehmen im Prozess der Umsetzung und welche Rolle spielt hierbei die Responsible Product Policy des Unternehmens.

Die Sicht des Finanzsektors: Baumwolle und Risikomanagement
Michael Alt, Head of Commodities Advisory & Distribution und Egon Weinberg, Head of Commodity Research bei der Commerzbank, Frankfurt, Deutschland, geben einen Überblick darüber, was Rohstoffmärkte an den Börsen antreibt und bieten einen speziellen Blick auf die Baumwolle. Es soll deutlich werden, mit welchen Auswirkungen Marktteilnehmer rechnen und wie sie im Vorfeld vorausschauendes Risikomanagement betreiben können.

Wir setzen die Baumwollbrille auf: Vielfalt in Wissenschaft und Praxis
Das Programm der internationalen Baumwolltagung überzeugt mit 14 Sessions durch seine Vielfältigkeit. Zu den großen Themenkomplexen gehören im konzeptionellen Kontext Nachhaltigkeit, Transparenz und Verantwortung entlang der Baumwollproduktions- und Lieferketten sowie eine ressourcenschonende Kreislaufwirtschaft. Im technischen Tagungsteil geht es um fortschrittliche und ressourcenschonende Prozesse und unterstützende Methoden, die zu höheren Erträgen für die Farmer und besserer Qualität von Baumwolle in Hinblick auf ihre Weiterverarbeitung zu Textilien führen. Dabei wird auch deutlich, dass die Verwendung von Baumwolle weit über den Bekleidungsbereich hinausgeht und die Naturfaser sowohl für technische Anwendungen aber auch in veränderter Form als Plastikersatz zum Einsatz kommen kann.

Kommunikation und Interaktion gehen auch ‚virtuell‘
Überhaupt: Interaktion und Austausch unter den Teilnehmern haben eine wesentliche Bedeutung während und auch noch nach der Tagung. Durch die Interaktionstools der Tagungsplattform besteht die Möglichkeit, während der Vorträge Fragen an die Referenten zu richten oder an Umfragen teilzunehmen. Teilnehmer und Referenten können sich im Anschluss an die Vorträge zu privaten Video-Meetings verabreden. Weitere Dialogformate, die dazu beitragen, miteinander ins Gespräch zu kommen, werden im Rahmen eines digitalen Matchmaking zu ausgewählten Themen oder als Business-Speed-Dating zum gegenseitigen Kennenlernen angeboten. Jeder Teilnehmer ist über die Tagungsplattform erreichbar, wenn man möchte.

International technology Group ANDRITZ has received an order from Pureko Sp. z o.o. to supply a needlepunch line for their plant in Myszków, Poland. The line will process recycling fibers from garment waste for the production of technical felts dedicated to furniture and geotextile applications. The final products will have fabric weights ranging from 300 to 500 gsm, and the production capacity will be up to 750 kg/h. Installation and start-up are scheduled for the third quarter of 2021.

The ANDRITZ scope of supply includes a complete neXline needlepunch eXcelle line – from web forming to needling – as well as engineering and ANDRITZ’s recently launched scanning gauge.

This is the second ANDRITZ line to be supplied to Pureko, thus demonstrating the strong partnership between both companies. Three years ago, Pureko invested in a new, modern plant supplied by ANDRITZ Asselin-Thibeau to produce fluffy nonwovens used in the furniture, textile, and clothing industries. The new line will enable Pureko to continue its ongoing growth.

Founded in 2009, Pureko is one of the most important producers of nonwovens in Poland. The company’s nonwoven products are mainly used for wadding; they are free of chemicals, do not involve any health hazards, and are hypoallergenic. Pureko’s products carry top certificates such as INTERTEK, FIRA, OEKO-TEX, and the National Institute of Hygiene.

JEC Group, dedicated to promoting composite materials, introduces all-new digital event series for the composites community: JEC Composites CONNECT. On June 1-2, 2021, this first round-the-clock event will be one of the industry’s most significant events, hosting major industry players, enabling participants to discover the latest trends thanks to business conferences and get networking opportunities. This live-streamed event will also be the place to highlight innovation through competitions, awards ceremonies and keynote speeches.

JEC Composites CONNECT: a digital event to bring the composites community together
Participants can access the free non-stop digital floor from 8:30 am on June 1 to 6 pm CEST on June 2. This first JEC Composites CONNECT will work as an online trade show, with digital stands for companies showcasing their latest products, from raw materials to composites parts manufacturers with various networking rooms, a meeting requests platform, and with a conference area to access live streaming content.

Composites innovation at the core
JEC Composites CONNECT will host outstanding keynote speakers and all the major JEC Composites competitions and awards promoting innovation, research teamwork, and entrepreneurship in the composites industry.

• The JEC Composites Innovation Awards celebrate the most innovative composites projects and fruitful collaborations between different value chain players in 2021.
• The 2021 JEC Composites Startup Booster competition, with live pitches and winners ceremony.
• The JEC Composites Challenge, where Ph.Ds will present their research projects in front of the jury.

The Awards ceremony will take place on Wednesday, June 2, with an opening keynote speech from inventor and genius entrepreneur Franky Zapata, a.k.a. ‘the Flying Man.’ As the CEO and founder of the company that bears his name, he became well-known for his famed crossing of the English Channel in August 2019 on his Flyboard® Air.

• SGL Carbon receives €42.9 million funding under IPCEI for graphite anode materials (GAM) in lithium-ion batteries
• Funding in the amount of €42.9 million to 2028 for SGL Carbon GmbH from the German Federal Government and the Free State of Bavaria
• SGL Carbon project aims at European production of innovative anode materials as a key value-added step in electromobility

SGL Carbon, a leading supplier of graphite and carbon products, today received a funding notification for the development and industrialization of innovative anode materials made of synthetic graphite for use in lithium-ion batteries. The funding program is part of the second European IPCEI (Important Project of Common European Interest) / EUBatIn (European Battery Innovation) program, which aims at a competitive European value chain for lithium-ion batteries based on innovative and sustainable technologies.

SGL Carbon is one of a few manufacturers of synthetic graphite for anode materials in Europe. The company’s contribution to the IPCEI project ranges from the development of anode materials with increased performance, energy-efficient and sustainable manufacturing processes to novel recycling concepts. It also includes scaling them up to pilot scale and finally mass production. Over the project lifetime until 2028, the goal is to also establish a closed cycle for this cell component. SGL Carbon has already created a solid foundation for the project through previous investments such as the battery application laboratory at its Meitingen site. The German federal government and the Free State of Bavaria provide funding for the SGL Carbon project totaling €42.9 million, which can be drawn down over the duration of the project.

"With our development and industrialization project for new innovative anode materials and processes, we make an essential contribution to establishing a sustainable and competitive European value chain and circular economy for lithium-ion batteries. In turn, this enables us to support our customers with tailored materials and services in their innovation and industrialization process. We are very pleased about the support from the federal and state governments in this important task and would like to express our sincere thanks," explains Burkhard Straube, President Business Unit Graphite Solutions at SGL Carbon.

"In order to produce competitive, high-performance and particularly environmentally friendly batteries in the future, we need innovations. The companies participating in the IPCEIs base their battery materials, cells and systems pursued in the projects on their own research - in cooperation with their partners. This way, we ensure that the battery ecosystem being created in Germany and Europe will also place us among the world leaders in terms of technology," says Elisabeth Winkelmeier-Becker, Parliamentary State Secretary at the German Federal Ministry of Economics and Technology.

"The funding ensures value creation in a central high-tech segment with great future potential, which is ideally suited to Bavaria as a business location. In the course of the project, 25 jobs will be secured or newly created in Meitingen. SGL Carbon is an important company for the entire region and a major employer," says Hubert Aiwanger, Bavarian Minister of Economic Affairs and Bavarian Deputy Minister-President.
 
Synthetic graphite is utilized as anode material for lithium-ion batteries in many fast-growing applications such as electric vehicles, stationary energy storage systems and mobile consumer devices. Compared to natural graphite, synthetic graphite has a better performance, higher quality consistency and easier production scalability, as well as a better profile in terms of environmental footprint and safety in manufacturing. In the project described, SGL Carbon builds on its core competencies in the development and mass production of synthetic graphite.