From the Sector

Reset
388 results
20.10.2022

Akzo Nobel N.V. publishes results for Q3 2022

Highlights Grow & Deliver (compared with Q3 2021)

  • Revenue up 19% and 14% higher in constant currencies1, pricing up 13%
  • ROS2 at 6.4% (2021: 10.0%), resulting from lower volumes and higher raw material and freight costs, as well as inflation on operating expenses
  • Adjusted EBITDA at €283 million (2021: €325 million)
  • Q4 2022 adjusted operating income expected below €150 million

Highlights Q3 2022 (compared with Q3 2021)

Highlights Grow & Deliver (compared with Q3 2021)

  • Revenue up 19% and 14% higher in constant currencies1, pricing up 13%
  • ROS2 at 6.4% (2021: 10.0%), resulting from lower volumes and higher raw material and freight costs, as well as inflation on operating expenses
  • Adjusted EBITDA at €283 million (2021: €325 million)
  • Q4 2022 adjusted operating income expected below €150 million

Highlights Q3 2022 (compared with Q3 2021)

  • Pricing up 13%, offsetting the increase of raw material and other variable costs. Volumes 5% lower, mainly due to destocking in the distribution channels in Decorative Paints in Europe and in Performance Coatings, as well as lower market demand in China
  • Operating income at €168 million (2021: €226 million), includes €16 million negative impact from Identified items (2021: €15 million net negative impact) and €17 million negative from the retrospective hyperinflation impact of the first half-year of 2022. OPI margin 5.9% (2021: 9.4%)
  • Adjusted operating income3 at €184 million (2021: €241 million); excluding the retrospective impact of hyperinflation accounting at €201 million
  • Net cash from operating activities decreased to an inflow of €126 million (2021: inflow of €290 million)
  • Net income attributable to shareholders at €84 million (2021: €164 million)
  • EPS from total operations at €0.48 (2021: €0.89); adjusted EPS from continuing operations at €0.57 (2021: €0.93)
  • Interim dividend of €0.44 per share (2021: €0.44 per share)

AkzoNobel CEO, Thierry Vanlancker, commented: “Our €201 million adjusted operating income excluding the retrospective impact of hyperinflation accounting bring our Q3 results in line with the market update issued at the end of September. Sharply increased macro-economic uncertainties negatively impacted consumer confidence. This resulted in destocking across several distribution channels in decorative paints Europe and performance coatings, while the market in China was impacted by the ongoing zero COVID-19 policy. Thanks to the strong commitment of our teams, we continue to offset the impact of raw material and freight cost inflation with pricing. We’ve now delivered cumulative pricing of 22% over the last two years. The macro-economic turbulence is expected to continue well into next year. We’ve therefore decided to suspend our targets for 2023 and will provide further guidance when announcing our full-year 2022 results. In the meantime, we will continue to focus on our margin management and cost reduction initiatives.”

Source:

AkzoNobel

Infinited Fiber Company
14.10.2022

Infinited Fiber Company accelerates scaling plans amid turbulence

and textile technology company Infinited Fiber Company’s work to build the world’s first commercial-scale Infinna™ textile fiber factory in Kemi, Finland, has progressed largely according to plan since the announcement of the factory site in June 2022. The company is increasing its focus on scaling Infinna™ production volume further as quickly as possible. This is in response to the continued and growing customer demand for the company’s high-quality regenerated textile fiber Infinna™. The market impacts of the ongoing war in Ukraine – including the increased uncertainty on the global utility, commodity and financial markets – have highlighted the need to proceed rapidly with technology scaling on multiple fronts.
 

and textile technology company Infinited Fiber Company’s work to build the world’s first commercial-scale Infinna™ textile fiber factory in Kemi, Finland, has progressed largely according to plan since the announcement of the factory site in June 2022. The company is increasing its focus on scaling Infinna™ production volume further as quickly as possible. This is in response to the continued and growing customer demand for the company’s high-quality regenerated textile fiber Infinna™. The market impacts of the ongoing war in Ukraine – including the increased uncertainty on the global utility, commodity and financial markets – have highlighted the need to proceed rapidly with technology scaling on multiple fronts.
 
“We are not immune to the global market context in which we operate. The supply chain issues stemming from the Covid-19 pandemic are still wreaking havoc, and the ongoing war in Ukraine has dealt a heavy blow to the global utility, commodity, and financial markets – and to us. We are satisfied with the progress at the site of our planned commercial-scale factory and the opening of the factory remains our key priority. The current, unstable market environment has highlighted the need for us to also accelerate efforts to simultaneously pursue other avenues for scaling production, with the ultimate aim of serving our customers in the best possible way in the long run,” said Infinited Fiber Company CEO and cofounder Petri Alava.
 
Infinited Fiber Company said in June that it planned to build a factory to produce Infinna™, a textile fiber that can be created 100% from cotton-rich textile waste, at the site of a discontinued paper mill in Kemi, Finland. The factory is expected to create around 270 jobs in the area and to have an annual production capacity of 30,000 metric tons, equivalent to the fiber needed for about 100 million T-shirts. The future factory’s customer-base includes several of the world’s leading apparel companies, with most of the future production capacity already sold out for several years.
 
Since June, Infinited Fiber Company has advanced the site-specific basic engineering, recruitment planning, vendor selection, and permit processes according to plan. The limited component availability caused by the continuing impacts of the Covid-19 pandemic and the war in Ukraine have, however, prolonged significantly the delivery times for some of the key equipment and machinery needed for the factory. As a result of these developments, Infinited Fiber Company has re-evaluated its overall factory project timeline. The first commercial fiber deliveries from Kemi are now expected to begin in January 2026. The scope of the project remains unchanged and construction work at the site is expected begin during 2023 as previously communicated.
 
In addition, the European energy crisis sparked by the war in Ukraine has caused the electricity prices in Finland to roughly triple, and the prices of some of the key chemicals needed in the fiber regeneration process have risen by some 200-300% since the start of the war.
 
“We of course don’t have a crystal ball. But according to our advisors and other experts, utility and commodity prices are forecast to normalize before 2026, when we now expect the first commercial fiber deliveries from Kemi to be shipped. In addition to the likely normalization of the market, the extended timeline enables us to undertake the necessary measures to develop the profitability of the future factory. The growing demand for Infinna™, despite the general turbulence, is an encouraging and clear indication of the fashion industry’s commitment to circularity,” said Petri Alava.

Source:

Infinited Fiber Company

(c) BVMed
13.10.2022

BVMed: Ergebnisse der Herbstumfrage 2022

Die Umsatzentwicklung der Medizintechnik-Branche zeigt sich nach den Ergebnissen der Herbstumfrage des Bundesverbandes Medizintechnologie (BVMed) mit einem prognostizierten Plus von 3,3 Prozent gegenüber dem Vorjahr leicht erholt. Die Gewinne der MedTech-Branche werden 2022 jedoch aufgrund der dramatischen Kostensteigerungen bei den Transport-, Rohstoff- und Energiepreisen sowie den regulatorischen Mehraufwand durch die EU-Medizinprodukte-Verordnung (MDR) insgesamt zurückgehen. Dennoch schaffen die Unternehmen neue Arbeitsplätze und investieren in Produktionsstandorte, so das Ergebnis der BVMed-Herbstumfrage, die BVMed-Geschäftsführer Dr. Marc-Pierre Möll auf der Jahrespressekonferenz des MedTech-Verbandes vorstellte.

Die Kostensteigerungen und bürokratischen Hemmnisse durch die MDR führen zudem zu einem Rückgang der Innovationsdynamik der Branche. Der Innovationsklima-Index der MedTech-Branche ist mit 3,6 auf einer Zehnerskala auf einem Tiefstwert. „Das zeigt die Dramatik der Herausforderungen für die KMU-geprägte MedTech-Branche in Deutschland auf“, so Möll. An der Herbstumfrage nahmen 120 Mitgliedsunternehmen des BVMed teil.

Die Umsatzentwicklung der Medizintechnik-Branche zeigt sich nach den Ergebnissen der Herbstumfrage des Bundesverbandes Medizintechnologie (BVMed) mit einem prognostizierten Plus von 3,3 Prozent gegenüber dem Vorjahr leicht erholt. Die Gewinne der MedTech-Branche werden 2022 jedoch aufgrund der dramatischen Kostensteigerungen bei den Transport-, Rohstoff- und Energiepreisen sowie den regulatorischen Mehraufwand durch die EU-Medizinprodukte-Verordnung (MDR) insgesamt zurückgehen. Dennoch schaffen die Unternehmen neue Arbeitsplätze und investieren in Produktionsstandorte, so das Ergebnis der BVMed-Herbstumfrage, die BVMed-Geschäftsführer Dr. Marc-Pierre Möll auf der Jahrespressekonferenz des MedTech-Verbandes vorstellte.

Die Kostensteigerungen und bürokratischen Hemmnisse durch die MDR führen zudem zu einem Rückgang der Innovationsdynamik der Branche. Der Innovationsklima-Index der MedTech-Branche ist mit 3,6 auf einer Zehnerskala auf einem Tiefstwert. „Das zeigt die Dramatik der Herausforderungen für die KMU-geprägte MedTech-Branche in Deutschland auf“, so Möll. An der Herbstumfrage nahmen 120 Mitgliedsunternehmen des BVMed teil.

Detaillierte Informationen zur Umfrage finden Sie hier.

Source:

BVMed | Bundesverband Medizintechnologie e.V.

(c) CHIC
30.09.2022

CHIC GBA 2022 postponed to 2023

Due to rising Covid-19 cases in Shenzhen, CHIC GBA (Greater Bay Area), scheduled from November 2-4, 2022, will be postponed to 2023 for pandemic control and integrated into CHIC Shanghai in spring.

CHIC Shanghai will be held at the National Exhibition and Convention Center from March 8-10, 2023.

Due to rising Covid-19 cases in Shenzhen, CHIC GBA (Greater Bay Area), scheduled from November 2-4, 2022, will be postponed to 2023 for pandemic control and integrated into CHIC Shanghai in spring.

CHIC Shanghai will be held at the National Exhibition and Convention Center from March 8-10, 2023.

Source:

CHIC / JANDALI

(c) deepak@deepakdavda.com
06.09.2022

Techtextil India to take place in September 2023

Messe Frankfurt India has announced that the ninth edition of Techtextil India will be held from 12 – 14 September 2023, for the first time at JIO World Convention Centre (JWCC), Mumbai. On the side-lines of the three-day fair, the organisers are planning a series of live sessions to spark debates on important industry topics and high-growth application areas.
 
As the leading business event for the Indian technical textile industry, Techtextil India, aims to connect international and domestic players with buyers from 12+ segments under diverse application areas and create a one-stop sourcing platform to highlight latest product innovations in technical textiles.
 

Messe Frankfurt India has announced that the ninth edition of Techtextil India will be held from 12 – 14 September 2023, for the first time at JIO World Convention Centre (JWCC), Mumbai. On the side-lines of the three-day fair, the organisers are planning a series of live sessions to spark debates on important industry topics and high-growth application areas.
 
As the leading business event for the Indian technical textile industry, Techtextil India, aims to connect international and domestic players with buyers from 12+ segments under diverse application areas and create a one-stop sourcing platform to highlight latest product innovations in technical textiles.
 
Marking a spectacular comeback after the lockdown, the eighth edition of Techtextil India in  2021 stood out to be a ground-breaking business platform for the technical textile sector with live demonstrations from over 150 companies’ brands and an exclusive German pavilion. The high-profile event, over the course of three days attracted 4,087 trade visitors from 25 states and 194 cities. Mr Pramod Khosla, Director, Khosla Profil Pvt Ltd, shared: “Despite the unprecedented situation created by pandemic, Techtextil India 2021 saw a tremendous response from visitors. This goes to show the immense interest and trust that industries and people have in the technical textiles sector as well as in Techtextil India.”
 
For the upcoming ninth edition, leading Indian players such as Alok Masterbatches, Khosla Profil, Park Nonwoven, Sarex Chemicals, Suntech Geo, Weavetech have already confirmed their participation and will be showcasing innovations in high-growth application areas of Geotech, Packtech, Agrotech & Indutech with a focus on products such as specialty fibres, filtration fabrics, functional textiles & advance technology.
 
While Mobiltech, Indutech, Meditech, Packtech and Sportech constitute a major share value in the global market for technical textiles, the segments likely to grow at the fastest rates (at rates faster than a CAGR of 10%) in the Indian market are Oekotech, Protech, Mobiltech, Geotech, Indutech, Agrotech, Buildtech and Packtech. The government’s target to accelerate technical textile sector growth from 8% to 15-20% range in the next five years and transform the nation into a major player in innovations, technology development, applications in key areas (agriculture, roads and railways, water resources, hygiene and healthcare, personal protection) is giving strong impetus to industry players.

With an aim to place India as one of the leaders in the global technical textile market and enhance its adoption and penetration domestically, the Indian government has earmarked INR 1000 crore (USD 130.7 million) dedicated only for R&D of the Technical Textiles sector, while the Union Budget 2022-23 further allocates INR 100 crore (USD 13.07 million) for the National Technical Textiles Mission. The centre is making strong efforts to encourage the use and adoption of technical textiles and has mandated the use of 92 items by government organisations covering agriculture, horticulture, highways, railways, water resources, and medical applications. The organisers are in talks with international technology players targeting these application areas to present their innovations at the three-day fair.

Source:

Messe Frankfurt (HK) Limited

(c) munich fabric start
02.09.2022

Abschlussbericht zur 50. MUNICH FABRIC START: Hauptthema war der Preis

Die internationale Fabric Trade Show bleibt ein gesetzter Termin im Messekalender. Die positive, motivierte und ambitionierte Aufbruchsstimmung der Messe mit inspirierenden Neuheiten, innovativen Inhalten und zukunftsgerichteten Themen hat sich auch auf die Branche übertragen: Neben intensiven Gesprächen insbesondere über Rohstoff-und Energiepreise, zeigten Einkäufer:innen, Produktmanager:innen und Designer:innen in München mehr denn je Lust auf Neues.

Die internationale Fabric Trade Show bleibt ein gesetzter Termin im Messekalender. Die positive, motivierte und ambitionierte Aufbruchsstimmung der Messe mit inspirierenden Neuheiten, innovativen Inhalten und zukunftsgerichteten Themen hat sich auch auf die Branche übertragen: Neben intensiven Gesprächen insbesondere über Rohstoff-und Energiepreise, zeigten Einkäufer:innen, Produktmanager:innen und Designer:innen in München mehr denn je Lust auf Neues.

Die MUNICH FABRIC START sieht sich mit der 50. Ausgabe vom 30. August bis zum 1. September in ihrer Rolle als eine der wichtigsten europäischen Stoffmessen und führenden Business-Plattformen für die Fashion und Denim-Branche bekräftigt. Der Münchner Veranstalter feierte mit dem Jubiläum nicht nur das Comeback von MUNICH FABRIC START und der internationalen Denim Trade Show BLUEZONE nach den Corona-bedingt angepassten Formaten der vergangenen Saisons, sondern auch ihr Wachstum mit der größten Veranstaltung seit Bestehen. Insgesamt zeigten rund 900 Aussteller:innen aus 40 Ländern ca. 1.500 Kollektionen auf einer Gesamtausstellungsfläche von 45.000 Quadratmetern - rund 2.500 Quadratmetern mehr als im Vergleich zur letzten Vor-Corona-Ausgabe im September 2019.

Die Messe registrierte im Vergleich zu Vor- Corona-Zeiten mit 14.200 Besucher:innen rückläufige Zahlen, hatte dies aber angesichts der nach wie vor und insbesondere transkontinental anhaltenden Reiseeinschränkungen und -vorbehalten ebenso wie der zu beobachtenden Strukturveränderungen in der Modebranche erwartet. Die Qualität der vor Ort anwesenden Einkäufer:innen, Designer:innen und Produktmana¬ger:innen überzeugte, was die Aussteller:innen bestätigten.

Nach München kamen vor allem Unternehmen aus Deutschland, Österreich und der Schweiz, darunter Firmen wie Adidas, ArmedAngels, Baldessarini, BMW, C&A, Cinque, Comma, Drykorn, Ecoalf, Hallhuber, die Holy Fashion Group, Hugo Boss, Lagerfeld, Laurèl, Mac, Marc Cain, Marc O’Polo, Nike, Peek & Cloppenburg, Riani, s.Oliver, Schumacher, Strellson, Vaude, Windsor oder Zalando. Eine wichtige Besucher:innengruppe blieben die Niederlande mit Firmen wie Calvin Klein, Claudia Sträter, Expresso Fashion oder Scotch & Soda. Ebenfalls stark mit ihren Teams vertreten waren der skandinavische Raum mit Besucher:innen wie Selected / Homme und die Bestseller-Gruppe genauso wie Brands aus Frankreich und Italien, darunter Calzedonia, Diesel, Giorgio Armani und Lacoste.

Sowohl auf der MUNICH FABRIC START im MOC als auch in der BLUEZONE wurde das Show-Konzept weiter ausgebaut: In den DESIGN STUDIOS kamen 60 international führende Stoffdesigner:innen, Print- und Musterentwickler:innen zusammen; KEYHOUSE und CATALYSER versammelten technologische, nachhaltige und ästhetische Innovationstreiber an den Schnittstellen von Fashion und Denim; das neue Format THE SOURCE war mit rund 65 Aussteller:innen bei seiner Premiere ausgebucht und lieferte in der neu erschlossenen Halle 8 direkt gegenüber vom MOC Antworten auf die steigende Nachfrage nach Manufacturing und Nearshoring.

Bei fast jedem Messegespräch ging es im preissensibelsten, europäischen Markt Deutschland darum, Ansätze zu finden, wie einerseits Eckpreislagen gehalten, andererseits nicht auf Qualität verzichtet werden muss – zu Zeiten steigender Energiepreise ein Balanceakt.

Source:

MUNICHFABRICSTART Exhibitions GmbH

15.08.2022

BVMed: „Hygienemaßnahmen konsequenter umsetzen und adäquat finanzieren“

Der Bundesverband Medizintechnologie (BVMed) fordert in seinem neuen Positionspapier, Hygienemaßnahmen in medizinischen Einrichtungen konsequenter umzusetzen und adäquat zu finanzieren. „Das strikte Einhalten von grundsätzlichen Präventionsmaßnahmen schützt vor der Verbreitung von Infektionen und dient damit der Wahrung von Gesundheit und Leben. Mit der jetzigen Sommer-Corona-Welle 2022 nehmen Bewusstsein und Hygiene-Compliance in der Bevölkerung jedoch leider wieder spürbar ab“, so BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll. Der BVMed fordert unter anderem ausreichende Ressourcen, eine adäquate Erstattung sowie eine zügige Umsetzung von hygienerelevanten Punkten aus dem Koalitionsvertrag.

Der Bundesverband Medizintechnologie (BVMed) fordert in seinem neuen Positionspapier, Hygienemaßnahmen in medizinischen Einrichtungen konsequenter umzusetzen und adäquat zu finanzieren. „Das strikte Einhalten von grundsätzlichen Präventionsmaßnahmen schützt vor der Verbreitung von Infektionen und dient damit der Wahrung von Gesundheit und Leben. Mit der jetzigen Sommer-Corona-Welle 2022 nehmen Bewusstsein und Hygiene-Compliance in der Bevölkerung jedoch leider wieder spürbar ab“, so BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll. Der BVMed fordert unter anderem ausreichende Ressourcen, eine adäquate Erstattung sowie eine zügige Umsetzung von hygienerelevanten Punkten aus dem Koalitionsvertrag.

Das BVMed-Positionspapier wurde vom BVMed-Fachbereich „Nosokomiale Infektionen“ (FBNI) erarbeitet. Nosokomiale Infektionen stehen im zeitlichen Zusammenhang mit medizinischen Maßnahmen in Krankenhäusern, Pflegeeinrichtungen oder in ambulanten Praxen. Nach aktuellen Schätzungen sind außerhalb von Pandemien jährlich etwa 8,9 Millionen Menschen in der EU von solchen behandlungsassoziierten Infektionen betroffen. Die häufigsten Formen sind Lungenentzündung, Harnwegs- und Wundinfektionen bis hin zur Sepsis (Blutvergiftung). Allein in Deutschland sterben jedes Jahr bis zu 20.000 Menschen an diesen Infektionen – das sind schätzungsweise sechsmal so viele Tote wie bei Straßenverkehrsunfällen. Zudem ist bereits etwa ein Drittel der Bakterien, die diese Infektionen verursachen, gegen Antibiotika resistent.

Bis zu einem Drittel der nosokomialen Infektionen gelten als vermeidbar. Die konsequente Umsetzung von Hygienemaßnahmen und der Einsatz risikominimierender Medizinprodukte und -technologien sind nach Ansicht des BVMed „effektive Mittel zur Vermeidung von behandlungsassoziierten Infektionen. Dies führt zu erheblichen Kosten- und Ressourceneinsparungen im Gesundheitswesen bei gleichzeitiger Verbesserung der Versorgungsqualität.“

Das BVMed-Positionspapier schlägt verschiedene Maßnahmen zur Verbesserung vor, wie:

  • Jährliche Daten von hoher Qualität:
    Daten zu nosokomialen Infektionen müssen in ihrem Umfang jährlich veröffentlicht werden, um durch Transparenz Aufmerksamkeit auf die Dimension des Problems zu lenken.
  • Umsetzung in Verordnungen:
    Empfehlungen von Experten, wie die der Kommission für Krankenhaushygiene und Infektionsprävention am Robert Koch-Institut (KRINKO), sollten in den Landeshygieneverordnungen der Bundesländer explizit Berücksichtigung finden. Sie müssen in den medizinischen Einrichtungen vollständig umgesetzt werden.
  • Ausreichende Ressourcen:
    Um hohe Hygienestandards und effektiven Infektionsschutz in medizinischen Einrichtungen aufrecht zu erhalten und dauerhaft zu gewährleisten, ist eine ausreichende Versorgung mit entsprechenden Ressourcen unabdingbar. Neben vermehrtem Einsatz gut aus- und regelmäßig weitergebildeten Personals gehören dazu auch spezifische Medizinprodukte und -technologien.
  • Adäquate Erstattung:
    Angesichts des steigenden Kostendrucks auf die Sachkosten im Krankenhaus und vieler im Einheitlichen Bewertungsmaßstab (EBM) nicht berücksichtigter Hygiene- und Infektionsschutzmaßnahmen im ambulanten Sektor stehen wir für eine auskömmliche Erstattung dieser Maßnahmen in allen medizinischen Einrichtungen. Die notwendigen Aufwände für Hygienemaßnahmen zur Umsetzung des Infektionsschutzgesetzes im Rahmen von medizinischen sowie pflegerischen Behandlungen in Arztpraxen, Kliniken und Pflegeeinrichtungen müssen konsequent evaluiert und vollumfänglich durch die Gesetzliche Krankenversicherung (GKV), die Bundesländer und die Pflegeversicherung erstattet werden.
  • Umsetzung von relevanten Punkten aus dem Koalitionsvertrag:
    Der Koalitionsvertrag der aktuellen Regierung stellt vielversprechende Maßnahmen in Aussicht, die einen Einfluss auf den Infektionsschutz haben. Hierzu gehören: der Nationale Präventionsplan, Umwelt und Nachhaltigkeit, Verbesserung der Situation in der Pflege, Stärkung des Öffentlichen Gesundheitsdienstes, Pandemievorsorge, sowie die Stärkung des RKI. Diese wichtigen Themen müssen nun mit Nachdruck angegangen werden.

„Patient:innen und Mitarbeiter:innen in medizinischen Einrichtungen haben ein Recht, vor gefährlichen und im Zweifel lebensbedrohlichen Infektionen geschützt zu werden“, so der Appell des BVMed.

Source:

BVMed

09.08.2022

NCTO: North Carolina Textile Executives highlight Importance of Industry

North Carolina textile executives spanning the fiber, yarn, fabric, and finished product textile industries participated in a roundtable discussion with Rep. Kathy Manning (D-NC), at which they discussed the innovative achievements and competitiveness of the domestic industry and outlined priority issues in Washington that impact their daily operations.

The roundtable discussion, hosted by Unifi Inc. and sponsored by the National Council of Textile Organizations (NCTO), was held at Unifi’s headquarters in Greensboro, North Carolina.

North Carolina is the second largest state employer of textile-related jobs, employing more than 30,000 jobs in 2021, according to U.S. government data. The state’s $2.7 billion in textile-related exports leads the nation, according to U.S. government data.

Congresswoman Manning’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $65.2 billion in output in 2021 and employed nearly 535,000 workers. The industry has been at the forefront of domestic manufacturing of over 1 billion personal protective equipment (PPE) items during the COVID-19 pandemic.

North Carolina textile executives spanning the fiber, yarn, fabric, and finished product textile industries participated in a roundtable discussion with Rep. Kathy Manning (D-NC), at which they discussed the innovative achievements and competitiveness of the domestic industry and outlined priority issues in Washington that impact their daily operations.

The roundtable discussion, hosted by Unifi Inc. and sponsored by the National Council of Textile Organizations (NCTO), was held at Unifi’s headquarters in Greensboro, North Carolina.

North Carolina is the second largest state employer of textile-related jobs, employing more than 30,000 jobs in 2021, according to U.S. government data. The state’s $2.7 billion in textile-related exports leads the nation, according to U.S. government data.

Congresswoman Manning’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $65.2 billion in output in 2021 and employed nearly 535,000 workers. The industry has been at the forefront of domestic manufacturing of over 1 billion personal protective equipment (PPE) items during the COVID-19 pandemic.

During the roundtable, North Carolina executives showcased the industry’s important contribution to the state and the U.S. economy as well as its advanced sustainability initiatives, while outlining critical policies, such as the importance of Buy American and Berry Amendment government procurement policies, maintaining strong rules of origins in free trade agreements, supporting a domestic PPE production sector, and the need to address larger systemic trade issues with China.

“In North Carolina, the textile industry is woven into the very fabric of our state and economy, with more than 33,000 workers employed in over 600 textile manufacturing facilities across the state. In Congress, I am committed to supporting our homegrown industry by making PPE in America, protecting the yarn forward rule of origin in our trade agreements, and cracking down on China’s unfair trade practices. I am thrilled to engage with industry leaders in my district, as we discuss ways to grow the U.S. textile industry and the critical role that textile manufacturers play in our local, state, and national economy,” said Congresswoman Kathy Manning.

Foto: Pixabay
09.08.2022

McKinsey: An Bekleidung und Schuhen wird gespart

  • Sorge vor steigenden Preisen verfestigt sich

Laut einer aktuellen McKinsey-Umfrage bereiten die rasch steigenden Preise den Konsument:innen zurzeit die größte Sorge, die Corona-Pandemie spielt kaum noch eine Rolle. Rund 48% der Befragten geben an, ihre größte Sorge sei aktuell die Inflation - ein deutlicher Zuwachs gegenüber dem April.
 
„Die Sorge der Konsumenten vor weiteren Preissteigerungen verfestigt sich“, sagt der McKinsey-Partner Marcus Jacob. Die Angst vor dem Ukraine-Krieg ist dagegen in den vergangenen Monaten geringer geworden. Hatte noch im April jeder dritte Befragte (34%) die Invasion der Ukraine als größte Sorge bezeichnet, so tat dies im Juni nur noch jeder Vierte (24%). Trotz der aktuell hohen Infektionszahlen nannten nur 4% die Corona-Pandemie als größte Sorge.

  • Sorge vor steigenden Preisen verfestigt sich

Laut einer aktuellen McKinsey-Umfrage bereiten die rasch steigenden Preise den Konsument:innen zurzeit die größte Sorge, die Corona-Pandemie spielt kaum noch eine Rolle. Rund 48% der Befragten geben an, ihre größte Sorge sei aktuell die Inflation - ein deutlicher Zuwachs gegenüber dem April.
 
„Die Sorge der Konsumenten vor weiteren Preissteigerungen verfestigt sich“, sagt der McKinsey-Partner Marcus Jacob. Die Angst vor dem Ukraine-Krieg ist dagegen in den vergangenen Monaten geringer geworden. Hatte noch im April jeder dritte Befragte (34%) die Invasion der Ukraine als größte Sorge bezeichnet, so tat dies im Juni nur noch jeder Vierte (24%). Trotz der aktuell hohen Infektionszahlen nannten nur 4% die Corona-Pandemie als größte Sorge.

Die steigenden Preise haben der Umfrage zufolge bereits spürbare Auswirkungen auf den Alltag vieler Menschen. „Die große Mehrheit - 73% - hat das Einkaufsverhalten bereits verändert, um zu sparen“, so Marcus Jacob. So landen häufiger die Eigenmarken der Handelsketten in den Einkaufswagen. Statt im Supermarkt oder im Fachgeschäft wird häufiger beim Discounter eingekauft. „Dieser Trend beschleunigt sich“.

Während mehr Geld für Benzin und Lebensmittel ausgegeben werden muss, wird außerdem bei nicht essentiellen Ausgaben wie beispielsweise Bekleidung, Schuhen, aber auch Möbel oder Elektronik gespart. 59% der Befragten geben an, sie würden inzwischen genauer auf den eigenen Energieverbrauch achten.

More information:
Umfrage McKinsey Inflation
Source:

McKinsey&Company

(c) Messe Frankfurt (HK) Ltd.
08.08.2022

Deferral of Cinte Techtextil China 2022

In light of the evolving pandemic circumstances in Shanghai, Cinte Techtextil China will no longer be taking place from 6 – 8 September at the Shanghai New International Expo Centre. A new date for the technical textile fair will be announced in due course.
 
Ms Wendy Wen, Managing Director of Messe Frankfurt (HK) Ltd, explained: “After discussions with stakeholders, and in support of the government’s pandemic control measures, we have decided to postpone Cinte Techtextil China 2022 to a later date. The safety of fairgoers is of paramount importance to the fair’s ongoing success, and we are working tirelessly to provide an efficient sourcing platform for the technical textile industry. I would like to thank all participants for their sustained support and understanding.”

In light of the evolving pandemic circumstances in Shanghai, Cinte Techtextil China will no longer be taking place from 6 – 8 September at the Shanghai New International Expo Centre. A new date for the technical textile fair will be announced in due course.
 
Ms Wendy Wen, Managing Director of Messe Frankfurt (HK) Ltd, explained: “After discussions with stakeholders, and in support of the government’s pandemic control measures, we have decided to postpone Cinte Techtextil China 2022 to a later date. The safety of fairgoers is of paramount importance to the fair’s ongoing success, and we are working tirelessly to provide an efficient sourcing platform for the technical textile industry. I would like to thank all participants for their sustained support and understanding.”

Cinte Techtextil China’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry. The 2021 edition attracted 366 exhibitors and recorded 14,868 visits. The fair is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA).

Source:

Messe Frankfurt (HK) Ltd

Foto: INNATEX – Internationale Fachmesse für nachhaltige Textilien
02.08.2022

50. INNATEX: Internationale Fachmesse für Green Fashion sieht erste Erholungszeichen

Die 50. INNATEX schloss am 31. Juli mit einem besseren Ergebnis, als viele Beteiligte erwartet hatten. Die Order und Publikumszahlen lagen zwar noch unter den Werten, die vor Corona als Standard galten, aber die Kurven steigen wieder und die Atmosphäre war so ausgelassen, wie man es bis 2019 von der internationalen Fachmesse für Naturtextilien kannte. Ein großer Teil der Labels und Institutionen berichtet von steigenden Reichweiten. All das unterstreicht die steigende Relevanz von Nachhaltigkeit in der Mode.

Rückkehr zur Naturfaser – am besten biozertifiziert
Zu den Trendthemen der Green-Fashion-Branche auf der INNATEX zählten Kreislaufwirtschaft, Naturfasern wie Leinen und Hanf, Pastellfarben und Transparenz entlang der Lieferketten. Die vom Deutschen Nachhaltigkeitspreis ausgezeichnete Online-Plattform Retraced bietet blockchain-basierte Lösungen für die Nachvollziehung bis zur Ressource. Axel Kolonko repräsentierte das Startup als einer von sieben Expert:innen in der erstmaligen Community Area und berichtete von hohem Interesse.

Die 50. INNATEX schloss am 31. Juli mit einem besseren Ergebnis, als viele Beteiligte erwartet hatten. Die Order und Publikumszahlen lagen zwar noch unter den Werten, die vor Corona als Standard galten, aber die Kurven steigen wieder und die Atmosphäre war so ausgelassen, wie man es bis 2019 von der internationalen Fachmesse für Naturtextilien kannte. Ein großer Teil der Labels und Institutionen berichtet von steigenden Reichweiten. All das unterstreicht die steigende Relevanz von Nachhaltigkeit in der Mode.

Rückkehr zur Naturfaser – am besten biozertifiziert
Zu den Trendthemen der Green-Fashion-Branche auf der INNATEX zählten Kreislaufwirtschaft, Naturfasern wie Leinen und Hanf, Pastellfarben und Transparenz entlang der Lieferketten. Die vom Deutschen Nachhaltigkeitspreis ausgezeichnete Online-Plattform Retraced bietet blockchain-basierte Lösungen für die Nachvollziehung bis zur Ressource. Axel Kolonko repräsentierte das Startup als einer von sieben Expert:innen in der erstmaligen Community Area und berichtete von hohem Interesse.

Die Pandemie und andere Problematiken sorgen für Planungsunsicherheiten
Aktuelle Themen und Herausforderungen, die bei den Lounge Talks in der Community Area und in der Messehalle besprochen wurden, gab es viele. Dazu zählen bevorstehende EU-Maßnahmen wie der Product Environmental Footprint, so Heike Hess vom Internationalen Verband der Naturtextilwirtschaft (IVN) und Schirmherr der INNATEX.

„Ein weiterer Aspekt ist die Engpass-Situation bei der Beschaffung,“ sagt Hess. „Das liegt an gestörten Lieferketten unter anderem durch Corona, Klimawandel und der internationalen politischen Krise, die der Krieg hervorruft. Die Knappheit für kleinere, konsequente Naturtextiler verschärft sich noch, weil große Konzerne auf den Nachhaltigkeitszug aufspringen und mit ihren Bestellmengen Vorrang haben. Für die daraus resultierende Planungsunsicherheit diskutieren wir derzeit Lösungen, darunter die strategische Netzwerkbildung, die Sicherung von Biofasern und Erschließung neuer Märkte durch globale Anbauprojekte.“

Alexander Hitzel, Projektleiter der INNATEX, resümiert: „Pandemie, Beschaffung, Inflation, steigende Energiepreise – es lässt sich einfach nicht voraussagen, was die nachhaltige Modeindustrie und andere Branchen in den nächsten Monaten erwartet, da muss man ehrlich sein. Aber diese 50. INNATEX gibt uns Zuversicht, dass Green Fashion wieder auf der Erfolgskurve ist.“

Die nächste INNATEX findet vom 21. bis 23. Januar 2023 statt.

26.07.2022

adidas adjusts outlook for 2022: Declining revenues in Greater China expected

adidas is adjusting its outlook for the financial year 2022. While second quarter results were somewhat ahead of expectations reflecting continued strong momentum in Western markets and a return to growth in Asia-Pacific, the company has been experiencing a slower-than-expected recovery in its business in Greater China since the start of the third quarter. Previously, the company had assumed that in absence of any major lockdowns as of Q3, currency-neutral revenues in the region would be flat during the second half of the year versus the prior year level. However, given the continued widespread covid-19-related restrictions, adidas now expects revenues in Greater China to decline at a double-digit rate during the remainder of the year.

adidas is adjusting its outlook for the financial year 2022. While second quarter results were somewhat ahead of expectations reflecting continued strong momentum in Western markets and a return to growth in Asia-Pacific, the company has been experiencing a slower-than-expected recovery in its business in Greater China since the start of the third quarter. Previously, the company had assumed that in absence of any major lockdowns as of Q3, currency-neutral revenues in the region would be flat during the second half of the year versus the prior year level. However, given the continued widespread covid-19-related restrictions, adidas now expects revenues in Greater China to decline at a double-digit rate during the remainder of the year.

As a result, adidas now expects currency-neutral revenues for the total company to grow at a mid- to high-single-digit rate in 2022 (previously: at the lower end of the 11% – 13% range). Because of the less favorable market mix due to lower-than-expected revenues in Greater China as well as the impact from initiatives to clear excess inventories in this market until the end of the year, the company’s gross margin is now expected to be around 49.0% in 2022 (previously: around 50.7%). Consequently, the company’s operating margin is now forecasted to be around 7.0% in 2022 (previously: around 9.4%) and net income from continuing operations is expected to reach a level of around € 1.3 billion (previously: at the lower end of the € 1.8 billion – € 1.9 billion range).

So far, the company did not experience a meaningful slowdown in the sell-through of its products or significant cancellations of wholesale orders in any other market. Nevertheless, the adjusted guidance also accounts for a potential slowdown of consumer spending in these markets during the second half of the year as a result of the more challenging macroeconomic conditions.

Despite these headwinds, adidas continues to expect double-digit revenue growth during the second half of the year for the total company. In addition to easier prior year comparables, the acceleration will be driven by adidas’ strong product pipeline, the restocking opportunity with its wholesale customers given unconstrained supply as well as the support from major sporting events.

Based on preliminary numbers, adidas’ currency-neutral revenues grew 4% during the second quarter. This increase was driven by strong double-digit growth in North America and Latin America, high-single-digit growth in EMEA (also double-digit growth excluding negative Russia/CIS impact) as well as a return to growth in Asia-Pacific. In euro terms, sales increased 10% to € 5.596 billion. The company’s gross margin declined 1.5 percentage points to a level of 50.3% and operating margin reached 7.0% during the second quarter (2021: 10.7%). Net income from continuing operations was € 360 million in Q2 (2021: € 387 million) supported by a one-time tax benefit of more than € 100 million due to the reversal of a prior year provision.

More information:
adidas financial year 2022
Source:

adidas AG

20.07.2022

AkzoNobel publishes results for second quarter 2022

Akzo Nobel N.V.  publishes results for second quarter 2022

Highlights Grow & Deliver (compared with Q2 2021)

  • Revenue up 14% and 10% higher in constant currencies1, pricing up 16%
  • ROS2 at 8.7% (2021: 13.3%), resulting from lower volumes and continued raw material and freight costs inflation
  • Adjusted EBITDA at €337 million (2021: €419 million)
  • Acquisition of Grupo Orbis completed in April 2022. Intended acquisition of Kansai Paint’s business in Africa announced in June 2022. Intended acquisition of the liquid wheel coatings business of Germany-based Lankwitzer Lackfabrik GmbH announced in July 2022

Highlights Q2 2022 (compared with Q2 2021)

Akzo Nobel N.V.  publishes results for second quarter 2022

Highlights Grow & Deliver (compared with Q2 2021)

  • Revenue up 14% and 10% higher in constant currencies1, pricing up 16%
  • ROS2 at 8.7% (2021: 13.3%), resulting from lower volumes and continued raw material and freight costs inflation
  • Adjusted EBITDA at €337 million (2021: €419 million)
  • Acquisition of Grupo Orbis completed in April 2022. Intended acquisition of Kansai Paint’s business in Africa announced in June 2022. Intended acquisition of the liquid wheel coatings business of Germany-based Lankwitzer Lackfabrik GmbH announced in July 2022

Highlights Q2 2022 (compared with Q2 2021)

  • Pricing up 16%; offsetting the increase of raw material and other variable costs. Volumes 9% lower
  • Operating income at €205 million (2021: €384 million), includes €44 million negative impact from Identified items (2021: €49 million net positive impact). OPI margin 7.2% (2021: 15.3%)
  • Adjusted operating income3 at €249 million (2021: €335 million)
  • Net cash from operating activities decreased to negative €52 million (2021: positive €168 million)
  • Net income attributable to shareholders at €106 million (2021: €261 million)
  • EPS from total operations at €0.60 (2021: €1.40); adjusted EPS from continuing operations at €0.84 (2021: €1.20)
More information:
AkzoNobel Coatings
Source:

AkzoNobel

19.07.2022

Rieter starts sales process for the remaining land owned by Rieter

  • Order intake of CHF 869.4 million, order backlog of more than CHF 2 100 million
  • Sales of CHF 620.6 million, preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022
  • EBIT of CHF -10.2 million, net result of CHF -25.2 million due to significant cost increases, additional costs, and acquisition-related expenses
  • Action plan to increase sales and profitability
  • Rieter site Winterthur
  • Outlook

Rieter continued to be successful in the market in the first half of 2022. Based on the company’s technology leadership, innovative product portfolio and the completion of the ring- and compact-spinning system, a high order intake and a significant increase in sales were generated. The increase in sales was achieved even though preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022. The order backlog is at a record level.

  • Order intake of CHF 869.4 million, order backlog of more than CHF 2 100 million
  • Sales of CHF 620.6 million, preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022
  • EBIT of CHF -10.2 million, net result of CHF -25.2 million due to significant cost increases, additional costs, and acquisition-related expenses
  • Action plan to increase sales and profitability
  • Rieter site Winterthur
  • Outlook

Rieter continued to be successful in the market in the first half of 2022. Based on the company’s technology leadership, innovative product portfolio and the completion of the ring- and compact-spinning system, a high order intake and a significant increase in sales were generated. The increase in sales was achieved even though preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022. The order backlog is at a record level. Despite higher sales, the significant increase in material and logistics costs, additional costs for compensation of the material shortages and the expenditure incurred for the acquisition in the years 2021/2022 resulted in a loss. Rieter is implementing an action plan to increase sales and profitability. The sales process for the remaining land owned by Rieter was initiated.

Order Intake and Order Backlog
Rieter posted an order intake of CHF 869.4 million, which included CHF 176.6 million from the businesses acquired in the years 2021/2022. As expected, demand has thus returned to normal compared with the exceptionally high figure for the prior-year period, but remains well above the average figure for the last five years of around CHF 570 million (first half 2021: CHF 975.3 million, first half 2022 excluding acquisition effect CHF 692.8 million).

The regional shift in demand with investments in additional spinning capacity outside China along with investments in the competitiveness of Chinese spinning mills continues. Rieter benefits from its technology leadership, the innovative product portfolio and the completion of the ring- and compact-spinning system through the acquisition of the automatic winding machine business. The largest order intakes came from India, Turkey, China, Uzbekistan, and Pakistan.

On June 30, 2022, the company had an order backlog of more than CHF 2 100 million (June 30, 2021: CHF 1 135 million). Cancellations in the reporting period amounted to around 5% of the order backlog.

Sales
The Rieter Group posted sales of CHF 620.6 million, which included CHF 68.9 million from the businesses acquired in the years 2021/2022 (first half 2021: CHF 400.5 million).

As a result, sales were significantly higher than in the prior-year period, although preproduced deliveries, which mainly affected the Business Group Machines & Systems, in the three-digit million range had to be postponed until the second half of 2022. The reasons for the postponements were the COVID lockdown in China and supply chain bottlenecks.

EBIT, Net Result and Free Cash Flow
Rieter posted a loss of CHF -10.2 million at the EBIT level in the first half of 2022.

Earnings were impacted by significantly higher material and logistics costs. The price increases already implemented are having a delayed effect, mainly in the Business Group Machines & Systems, and were therefore unable to compensate for the high increase in costs. In addition, costs in connection with material shortages negatively impacted profitability. The result also includes acquisition-related expenses of CHF -11.2 million.

The loss at the net result level was CHF -25.2 million, of which CHF -17.6 million was due to the acquisition.

Free cash flow was CHF -57.1 million, attributable to the build-up of inventories in connection with the high order backlog and postponed deliveries.

Action Plan to Increase Sales and Profitability
Rieter is implementing a comprehensive package of measures with the aim of increasing sales and profitability in the second half of 2022.

The package focuses on two main priorities: Firstly, Rieter is continuing to systematically implement price increases while working to improve the quality of margins of the order backlog, so as to compensate for cost increases in materials and logistics.
Secondly, Rieter is working closely with key suppliers and is developing alternative solutions to eliminate material bottlenecks, as far as possible, in order to safeguard deliveries.

Rieter Site Winterthur
The Board of Directors has decided to begin the process for the sale of the remaining land at the Rieter site in Winterthur (Switzerland). In total, around 75 000 m2 of land will be sold.

Outlook
As already reported, Rieter expects demand for new systems to normalize further in the coming months. Due to the capacity utilization at spinning mills, the company anticipates that demand for consumables, wear & tear and spare parts will remain at a good level.

For the full year 2022, due to the high order backlog and the consolidation of the businesses acquired from Saurer, Rieter expects sales of around CHF 1 400 million (2021: CHF 969.2 million). The reduced sales forecast compared to early 2022 (March 2022: CHF 1 500 million) reflects the impact of global supply bottlenecks. The realization of sales revenue from the order backlog continues to be associated with risks in relation to the well-known challenges.

Despite significantly higher sales, Rieter expects EBIT and net result for 2022 to be below the previous year’s level. This is due to the considerable increases in the cost of materials and logistics, additional costs for compensation of material shortages as well expenses in connection with the acquisition in the years 2021/2022. Despite the price increases already implemented, global cost increases continue to pose a risk to the growth of profitability.

Source:

Rieter Holding AG

15.07.2022

Intertextile Shanghai Home Textiles Autumn rescheduled to 2023

In light of the current pandemic circumstances in China, the 2022 edition of Intertextile Shanghai Home Textiles Autumn will be deferred. The Autumn fair, which was originally scheduled to be held from 15 – 17 August at the National Exhibition and Convention Center in Shanghai, will now take place in 2023 at the same venue. The fair’s organisers will announce the new date in due course.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd, explained the decision: “After holding discussions with our stakeholders, we have made what we believe to be the responsible decision to delay the fair. While the call was made with the safety of the fair’s participants in mind, deferring the fair to the early part of next year will also allow more time for fairgoers to plan for their participation.”

“We understand that there is a lot of anticipation surrounding this fair, with exhibitors and buyers eager to connect in person. We would like to thank all participants for their patience and understanding, and also to express our continued dedication to provide a quality international trading platform for the home textile industry.”

In light of the current pandemic circumstances in China, the 2022 edition of Intertextile Shanghai Home Textiles Autumn will be deferred. The Autumn fair, which was originally scheduled to be held from 15 – 17 August at the National Exhibition and Convention Center in Shanghai, will now take place in 2023 at the same venue. The fair’s organisers will announce the new date in due course.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd, explained the decision: “After holding discussions with our stakeholders, we have made what we believe to be the responsible decision to delay the fair. While the call was made with the safety of the fair’s participants in mind, deferring the fair to the early part of next year will also allow more time for fairgoers to plan for their participation.”

“We understand that there is a lot of anticipation surrounding this fair, with exhibitors and buyers eager to connect in person. We would like to thank all participants for their patience and understanding, and also to express our continued dedication to provide a quality international trading platform for the home textile industry.”

Exhibitors or visitors with any further enquiries related to the fair can email, or visit the fair’s official website.

Source:

Messe Frankfurt (HK) Ltd

(c) Beaulieu International Group
14.07.2022

Das France Relance-Programm stärkt die Stabilität von B.I.G. Yarns Comines

Am 13. Juli empfing B.I.G. Yarns Comines (FR) eine Delegation von institutionellen Vertretern im Rahmen des France Relance-Programms.

Ende 2021 wurde B.I.G. Yarns Comines als einer der Preisträger für das Programm der französischen Regierung ausgewählt, das sich stark auf die Beschleunigung des Wirtschaftswachstums konzentriert.

Das zu diesem Zweck geschaffene France Relance-Programm zielt darauf ab, Unternehmen nach der Covid-Krise finanziell zu unterstützen und die Erholung der Wirtschaft zu gewährleisten. Es gibt Unternehmen, die sich für zusätzliche Beschäftigung, die Stärkung von Kompetenzen (Beschäftigung, Ausbildung), Innovation, Wettbewerbsfähigkeit und natürlich Nachhaltigkeit einsetzen, Sauerstoff.

Am 13. Juli empfing B.I.G. Yarns Comines (FR) eine Delegation von institutionellen Vertretern im Rahmen des France Relance-Programms.

Ende 2021 wurde B.I.G. Yarns Comines als einer der Preisträger für das Programm der französischen Regierung ausgewählt, das sich stark auf die Beschleunigung des Wirtschaftswachstums konzentriert.

Das zu diesem Zweck geschaffene France Relance-Programm zielt darauf ab, Unternehmen nach der Covid-Krise finanziell zu unterstützen und die Erholung der Wirtschaft zu gewährleisten. Es gibt Unternehmen, die sich für zusätzliche Beschäftigung, die Stärkung von Kompetenzen (Beschäftigung, Ausbildung), Innovation, Wettbewerbsfähigkeit und natürlich Nachhaltigkeit einsetzen, Sauerstoff.

Die finanzielle Unterstützung ermöglichte es B.I.G. Yarns, die Produktionskapazität seiner erstklassigen 1-Schritt-3-Schicht-PA-Garntechnologie durch die Installation neuer, hochmoderner Produktionslinien am Standort Comines um 20% zu erhöhen. Die neuen Anlagen nutzen die hochmoderne PA-Garntechnologie von B.I.G. Yarns, die den Herstellern von Teppichfliesen mehr Freiheit in Bezug auf Design, Kontrast und Farbe, aber auch eine gesteigerte Flexibilität bietet. Dadurch können die Kunden schneller auf neue Entwicklungen auf dem Vertragsmarkt reagieren.

Auch den Mitarbeitern und der Umwelt kommt diese technologische Neuentwicklung zugute. Der spezifische Energieverbrauch wird ebenfalls optimiert und trägt so zur Energieeinsparung am Standort bei.

Neben der Stärkung und Erneuerung der Produktionsinfrastruktur und -technologie konzentrierte sich B.I.G. Yarns auch auf die Entwicklung neuer innovativer Produkte, die zu den Nachhaltigkeitsbemühungen seiner Kunden beitragen.

So wird B.I.G. Yarns zum ersten Mal PET-Garne produzieren und seinen Kunden in der Automobilindustrie ein völlig neues Portfolio an PET-Garnen anbieten können.

Dieses strategische Verstärkungsprojekt wird sicherstellen, dass sich B.I.G. Yarns Comines in einem sehr anspruchsvollen und sich schnell verändernden Markt, der von hohen Rohstoff- und Energiepreisen, starkem Wettbewerb und einer schwankenden Nachfrage, die den gesamten Sektor betrifft, geprägt ist, nachhaltig behaupten kann. Außerdem tragen alle Umsetzungen dazu bei, die CO2-Bilanz zu reduzieren, was sicherstellt, dass B.I.G. Yarns weiterhin eine nachhaltige Zukunft für seine Kunden, seine Mitarbeiter und die Gemeinschaft aufbauen kann.

Source:

Beaulieu International Group / EMG

Photo: ACIMIT
13.07.2022

Italian textile machinery sector returning to pre-Covid levels

  • Annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers

  • Digitalization and Sustainability Key to Resiliency for Italian Textile Machinery Sector

The objective critical issues faced by Italy as a whole throughout the course of 2021, primarily dictated by a pandemic that upset any and all pre-existing equilibriums, have not slowed or halted the Italian textile machinery sector.

Indeed, data presented during the annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers, held on 1 July proved decidedly positive, showing that in 2021 the sector recovered significantly compared to 2020, to the point of returning to pre-Covid levels.

Specifically, Italian textile machinery production amounted to 2.388 billion euros (+35% over 2020 and + 5% over 2019), with total exports amounting to 2.031 billion euros (+37% over 2020 and +9% over 2019).

  • Annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers

  • Digitalization and Sustainability Key to Resiliency for Italian Textile Machinery Sector

The objective critical issues faced by Italy as a whole throughout the course of 2021, primarily dictated by a pandemic that upset any and all pre-existing equilibriums, have not slowed or halted the Italian textile machinery sector.

Indeed, data presented during the annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers, held on 1 July proved decidedly positive, showing that in 2021 the sector recovered significantly compared to 2020, to the point of returning to pre-Covid levels.

Specifically, Italian textile machinery production amounted to 2.388 billion euros (+35% over 2020 and + 5% over 2019), with total exports amounting to 2.031 billion euros (+37% over 2020 and +9% over 2019).

However, these results do not cancel the obstacles that companies are still facing. Looking to the near future, expectations are for a rather uncertain outlook, as underscored by ACIMIT President Alessandro Zucchi: “2022 remains a year replete with unknown factors, starting with the Russian-Ukrainian conflict, along with the persistence of the pandemic, which seriously risk delaying expected growth consolidation for businesses in the sector. Difficulties in finding raw materials and components negatively affect the completion and fulfilment of orders processed as far back as 2021. To boot, rising energy costs and inflationary trends affecting numerous commodities are depressing overall business confidence. So the outlook for the sector is not so good.”
As such, the two cornerstones through which ACIMIT aims to support the Italian textile machinery sector are digitilization and sustainability.

4.0: The textile machinery sector looks to the future
The road to digital transformation has already led numerous manufacturers to completely rethink their production processes, rendering them more efficient and l ess expensive. The digital world is moving ahead at a decisive rate in the textile machinery sector, where the buzzwords are increasingly, for instance, the Internet of Things connecting to a company’s ecosystem, machine learning algorithms applied to production, predictive maintenance, and the integrated cloud management of various production departments. It is no coincidence that ACIMIT has focused decisively on its Digital Ready project, through which Italian textile machinery that adopt a common set of data are certified, with the aim of facilitating integration with the operating systems of client companies (ERP, MES, CRM, etc.).

A green soul
Combining production efficiency and respect for the environment: a challenge ACIMIT has made its own and which it promotes among its members through the Sustainable Technologies project. Launched by the association as early as 2011, the project highlights the commitment of Italian textile machinery manufacturers in the area of sustainability. At the heart of the project is the Green Label, a form of certification specifically for Italian textile machinery which highlights its energy and environmental performance. An all-Italian seal of approval developed in collaboration with RINA, an international certification body.
The assembly held on 1 July provided an opportunity to take stock of the Sustainable Technologies project, more specifically, with the presentation of the Rina Consulting survey on the Green Label’s evolution and impact in recent years.

The results have confirmed the initiative’s extreme validity. The technological advances implemented by the association’s machinery producers participating in the project have effectively translated into benefits in terms of environmental impact (reduction of CO2 equivalent emissions for machinery), as well as economic advantages for machinery users.

With reference to the year 2021, a total of 204,598 tons of CO2 emissions avoided on an annual basis have been quantified, thanks to the implementation of improvements on machinery. This is a truly significant reduction which, for the sake of comparison, corresponds to the carbon dioxide emissions generated by 36,864 automobiles travelling an average of 35,000 km a year. In terms of energy savings, the use of green labeled textile machinery has provided excellent performances in allowing for a reduction of up to 84% in consumption.

A round table discussion on the Green Label’s primary purpose
The environmental and economic impact generated in production processes for Italian textile machinery through the use of Green Label technologies was the focus of the round table which concluded the ACIMIT assembly.

Moderated by Aurora Magni (professor of the Industrial Systems Sustainability course at the LIUC School of Engineering), the debate involved Gianluca Brenna (Lipomo Printing House administrator and Vice President of the Italian Fashion System for Welfare), Pietro Pin (Benetton Group consultant and President of UNI for the textile-clothing area), Giorgio Ravasio (Italy Country Manager for Vivienne Westwood), as well as ACIMIT President Alessandro Zucchi.

Called on to compare common factors in their experiences relating to environmental transition processes for their respective companies, the participants were unanimous: the future of Italian textile machinery can no longer ignore advanced technology developments capable of offering sustainable solutions with a low environmental impact while also reducing production costs. This philosophy has by now been consolidated, and has proven to lead directly to a circular economy outlook.

The upcoming ITMA 2023 exhibition
Lastly, a word on ITMA 2023, the most important international exhibition for textile machinery, to be held in Italy from 8 to 14 June 2023 at Fiera-Milano Rho. Marking the 19th edition of ITMA, this trade fair is an essential event for the entire industry worldwide, providing a global showcase for numerous innovative operational solutions on display. A marketplace that offers participants extraordinary business opportunities. The participation of Italian companies is managed by ACIMIT.

14.06.2022

AkzoNobel updates Q2 outlook based on impact of China lockdowns

AkzoNobel has updated its Q2 outlook based on the impact of the evolving business environment, including the effect of China lockdowns and the slower start to the EMEA DIY season.

Overall demand signs for paints and coatings remain robust, with North America still constrained in raw material availability and logistics, but sequentially improving. In Europe in particular, macro-economic uncertainty related to consumer confidence has increased.

Consumer demand in the Deco DIY channels in Europe – which represent 40% of total Deco EMEA revenue – got off to a slow start in Q2, subsequently impacted by inventory reductions in the DIY channel. In June, Deco DIY channel demand improved back to 2019 levels. Despite share gains and our Deco Professional business performing as anticipated, the total Q2 operating income for our Decorative Paints segment is expected to be down by approximately €50 million versus expectations entering the second quarter.

AkzoNobel has updated its Q2 outlook based on the impact of the evolving business environment, including the effect of China lockdowns and the slower start to the EMEA DIY season.

Overall demand signs for paints and coatings remain robust, with North America still constrained in raw material availability and logistics, but sequentially improving. In Europe in particular, macro-economic uncertainty related to consumer confidence has increased.

Consumer demand in the Deco DIY channels in Europe – which represent 40% of total Deco EMEA revenue – got off to a slow start in Q2, subsequently impacted by inventory reductions in the DIY channel. In June, Deco DIY channel demand improved back to 2019 levels. Despite share gains and our Deco Professional business performing as anticipated, the total Q2 operating income for our Decorative Paints segment is expected to be down by approximately €50 million versus expectations entering the second quarter.

COVID-19 lockdowns in China during Q2 impact both paints and coatings. This impact was mainly on our coatings business, while paints was able to almost offset by progressing with its geographical expansion initiatives. The re-opening in June is showing a positive rebound, but not enough to catch up on all the missed revenue in the quarter, resulting in a negative operating income impact of approximately €40 million for the quarter, versus expectations entering Q2.

AkzoNobel continues to focus on achieving its €2 billion adjusted EBITDA target for 2023, despite the volatile market environment having a material impact on the company’s Q2 2022 financials.

More information:
AkzoNobel Coatings Covid-19
Source:

AkzoNobel

(c) Lisa Rato
07.06.2022

Messe Frankfurt informierte in New York zu textilen Nachhaltigkeitsaktivitäten

Mit ihren Textilveranstaltungen engagiert sich die Messe Frankfurt weltweit für die Sichtbarkeit der Nachhaltigen Entwicklungsziele. Dabei arbeitet sie zusammen mit dem Conscious Fashion and Lifestyle Network und dem UN Office for Partnerships. Am 2. Juni kam das internationale Netzwerk am Sitz der Vereinten Nationen zur ersten Jahrestagung zusammen.

Mit ihren Textilveranstaltungen engagiert sich die Messe Frankfurt weltweit für die Sichtbarkeit der Nachhaltigen Entwicklungsziele. Dabei arbeitet sie zusammen mit dem Conscious Fashion and Lifestyle Network und dem UN Office for Partnerships. Am 2. Juni kam das internationale Netzwerk am Sitz der Vereinten Nationen zur ersten Jahrestagung zusammen.

Bereits seit mehr als 15 Jahren macht die Messe Frankfurt auf ihren weltweiten Textilveranstaltungen unter dem Dach des Texpertise Network auf das Thema Nachhaltigkeit aufmerksam, gibt spezielle Messe-Guides heraus, initiiert Talkrunden, bietet geführte Touren zu Aussteller*innen mit entsprechendem Portfolio, erstellt Materialgallerien mit nachhaltigen Textilinnovationen und veranstaltet eigene Events, wie etwa die Neonyt, ausschließlich zu nachhaltiger Mode. Seit 2019 arbeitet die Messe Frankfurt mit dem Conscious Fashion and Lifestyle Network und dem UN Office for Partnerships zusammen, um zusätzlich die Nachhaltigen Entwicklungsziele (SDGs) auf ihren weltweiten Textilveranstaltungen bekannt zu machen und so einen Beitrag zu deren Erreichung in der Mode- und Textilindustrie zu leisten. Am 2. Juni kam das internationale Netzwerk aus Vertreter*innen der Mode- und Lifestyle-Branche, Medien, Regierungen und UN-Institutionen zu seiner ersten Jahrestagung am Hauptsitz der Vereinten Nationen in New York zusammen – mit dabei das Texpertise Network der Messe Frankfurt.
 
In Anbetracht der enormen Auswirkungen des Mode- und Lifestyle-Sektors auf Mensch und Umwelt gab das Jahrestreffen des Conscious Fashion and Lifestyle Network einen Überblick darüber, wie die Plattform ein transparentes, umfassendes und transformatives Engagement globaler Stakeholder fördert, um dringende Maßnahmen für Nachhaltigkeit voranzutreiben. Hauptziel des Netzwerks ist es, vorhandenes Fachwissen, Innovation, Technologie und Ressourcen für eine nachhaltige und ganzheitliche Erholung nach COVID-19 zu mobilisieren, wobei die Ziele für nachhaltige Entwicklung als Leitrahmen dienen.
 
In einer gemeinsamen Paneldiskussion sprachen Olaf Schmidt, Vice President Textiles & Textile Technologies bei der Messe Frankfurt, Sara Kozlowski, Vice President Education and Sustainability Initiatives beim Council of Fashion Designers of America, Sergio Fernández de Córdova, Vorsitzender der PVBLIC Foundation und Roberta Marcenaro, CEO der Strategieberatung IMARK und Strategin bei der POLIMODA über die Bedeutung von Partnerschaften und Zusammenarbeit bei der Erreichung der Nachhaltigen Entwicklungsziele. Moderiert wurde die Diskussion von Lucie Brigham, Chief of Office des United Nations Office for Partnerships und Mitgründerin des Conscious Fashion and Lifestyle Networks.

„Die Textilindustrie ist eine Branche mit starken Gegensätzen. Man findet hier sowohl traditionelle Handwerkskunst als auch Hightech mit vollständig digitalisierten und automatisierten Fertigungsprozessen. Gleichzeitig sind die Lieferketten so komplex und global vernetzt wie in kaum einer anderen Branche. Nachhaltigkeit kann nur im engen Zusammenspiel der richtigen Partner*innen erreicht werden“, so Olaf Schmidt während der Diskussion. „Als Messeveranstalter machen wir selbst die Textilindustrie zwar nicht unmittelbar nachhaltiger. Unsere zentralen Aufgaben im Texpertise Network der Messe Frankfurt sind jedoch andere: Wir bieten Plattformen zum Netzwerken und bringen auf weltweit rund 60 Textilveranstaltungen die richtigen Partner*innen zusammen. Wir schaffen Sichtbarkeit, indem wir der Branche eine Bühne bieten, um ihr Nachhaltigkeitsengagement ins Blickfeld zu rücken. Wir bieten Bildung und Wissenstransfer auf zahlreichen Konferenz- und Talkformaten rund um das Thema Nachhaltigkeit. Und wir gehen mit gutem Beispiel voran. Mit unseren weltweiten Aktionen zu den SDGs haben wir bislang schätzungsweise rund 9.200 Aussteller*innen und 195.500 Besucher*innen erreicht – auch in Zeiten der Pandemie.“

Gemeinsam mit der Messe Frankfurt waren Vertreter*innen der Textil- und Modeunternehmen Hugo Boss, Heiq, Ocean Safe, Lectra, Madewell und des KTC Korea Textile Center vor Ort. Weitere Sprecher*innen auf der Veranstaltung waren zudem Arch and Hook, Catcher in the Style, Calik Denim, DRESSX, Fashion Impact Fund, Fashion Revolution, Jakarta Fashion Week, Lenzing, Lycra, nft now, People Tree, Remake, Saheli Women, Sourcing Journal, The Business of Fashion, Timberland, Tech Crunch, Textile Exchange, Transformers Foundation, The Canvas Global, Vogue, WWD sowie Designer*innen wie Anyango Mpinga, Gabriela Hearst, Patrick McDowell und Shivam Punjya.
 
Die nächsten Gelegenheiten, sich umfassend zur textilen Wertschöpfungskette einschließlich innovativer textiler Materialien, Herstellungsverfahren sowie Einrichtungs- und Objekttextilien und nachhaltiger Mode zu informieren, bieten die internationalen Leitmessen Techtextil, Texprocess und das Heimtextil Summer Special vom 21. bis 24. Juni 2022 sowie die erste DtoC-Ausgabe der Neonyt, das Neonyt Lab, vom 24. bis 26. Juni 2022 in Frankfurt.

Source:

Messe Frankfurt Exhibition GmbH

26.05.2022

Rieter anticipates losses in the first half of 2022

  • Exceptionally high order backlog and sustained strong demand
  • Supply chain bottlenecks, COVID lockdown in China and significant cost increases
  • Takeover of winding machine business leads to additional costs
  • Sales and earnings adversely impacted in first half-year
  • Considerably improved market position

Despite an exceptionally high order backlog and sustained strong demand, Rieter’s business situation in the first half of 2022 is characterized by the well-known supply chain bottlenecks, the repercussions of the COVID lockdown in China and the significant increases in material and transportation costs.

Further costs are added in connection with the takeover of the automatic winding business as of April 1, 2022.

These factors are adversely impacting both sales and earnings.

  • Exceptionally high order backlog and sustained strong demand
  • Supply chain bottlenecks, COVID lockdown in China and significant cost increases
  • Takeover of winding machine business leads to additional costs
  • Sales and earnings adversely impacted in first half-year
  • Considerably improved market position

Despite an exceptionally high order backlog and sustained strong demand, Rieter’s business situation in the first half of 2022 is characterized by the well-known supply chain bottlenecks, the repercussions of the COVID lockdown in China and the significant increases in material and transportation costs.

Further costs are added in connection with the takeover of the automatic winding business as of April 1, 2022.

These factors are adversely impacting both sales and earnings.

Rieter expects significantly higher sales in the first half of 2022 compared to the prior-year period (first half of 2021: CHF 400.5 million). Rieter anticipates a loss at the EBIT and net result level in the first half of 2022 (first half of 2021: EBIT CHF 9.0 million, net result: CHF 5.3 million).
The company is working intensively on the implementation of measures to minimize the impact of the supply chain bottlenecks, the COVID lockdown in China and the cost increases. The implemented price increases have a delayed effect, particularly in the machinery business. The integration of the automatic winding business is proceeding according to plan.

As soon as the situation in the sourcing markets has normalized, Rieter expects to benefit from the exceptionally high order backlog and the considerably improved market position as a result of the takeover of the automatic winding business as well as Accotex and Temco.
Rieter will provide a detailed report on the business results of the first half of 2022 in July 2022.

Source:

Rieter Management AG