From the Sector

Reset
350 results
04.11.2020

DyStar Exhibits at China Interdye 2020

Shanghai, China - DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation will exhibit in the 20th China International Dyestuff Industry, Pigments and Textile Chemicals Exhibition - China Interdye 2020. DyStar will showcase the latest product innovations at Hall 1 booth #A330.

The three-day annual event will be taking place at Shanghai World Expo Exhibition & Convention Center (SWEECC) and opens doors on 8th November. DyStar’s managers will be onsite to support visitors from production houses, manufacturers, and Brands and Retailers with essential information, helping them to make meaningful and notable decisions based on tangible benefits such as reduction of water, waste and energy consumption, thereby improving their end-products and quality.

Shanghai, China - DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation will exhibit in the 20th China International Dyestuff Industry, Pigments and Textile Chemicals Exhibition - China Interdye 2020. DyStar will showcase the latest product innovations at Hall 1 booth #A330.

The three-day annual event will be taking place at Shanghai World Expo Exhibition & Convention Center (SWEECC) and opens doors on 8th November. DyStar’s managers will be onsite to support visitors from production houses, manufacturers, and Brands and Retailers with essential information, helping them to make meaningful and notable decisions based on tangible benefits such as reduction of water, waste and energy consumption, thereby improving their end-products and quality.

DyStar’s sustainable solutions can further optimize productions, processes, and reduce costs. Some of these products and concepts are highlighted at the event as follows:
•    Recent launch of Cadira® Polyamide and Cadira Polyester/Cellulosic Exhaust
•    Total collection of eleven Cadira® modules
•    High Fast Dianix® XF2 Range
•    Sera® Wash M-VFN
•    Levafix® CA and Remazol® SAM offer

Despite a year full of global economic challenges, with the supply chain and stakeholders heavily strained by the global pandemic, DyStar is determined to support the industry and its customers. They can benefit from our legacy of innovations and product offerings, so that they can continue to drive sustainability and growth in their respective domains, contributing in a responsible and yet sustainable manner for a cleaner future.

Erstklassige Wischtücher mit Phantom-Technologie (c) Oerlikon Manmade Fibers
Phantom technology enables greater freedom for formulating continuous and discrete fibers allows for more flexible and absorbent structures and highly textured materials.
22.10.2020

First class wipes with Phantom technology

Neumünster – Success is built by connecting the right people with the right product. In a global marketplace, this means collaboration is just as important as competition. Companies need to focus on their strengths, while finding practical ways to innovate and expand upon their capabilities.

An exclusive license from Procter & Gamble offers the best for nonwovens

In order to do so, working together often makes the most sense. This is what motivated Procter & Gamble and Oerlikon Nonwoven – Teknoweb Materials to agree on an exclusive license agreement to market and sell the Phantom platform worldwide.

Neumünster – Success is built by connecting the right people with the right product. In a global marketplace, this means collaboration is just as important as competition. Companies need to focus on their strengths, while finding practical ways to innovate and expand upon their capabilities.

An exclusive license from Procter & Gamble offers the best for nonwovens

In order to do so, working together often makes the most sense. This is what motivated Procter & Gamble and Oerlikon Nonwoven – Teknoweb Materials to agree on an exclusive license agreement to market and sell the Phantom platform worldwide.

The patented process for hybrid nonwovens combines the best of both airlaid and spunmelt technologies to deliver new, flexible ways of creating wet and dry wipes. Phantom technology offers additional benefits by reducing resources and cost, while increasing overall performance. The exclusive license gives Oerlikon Nonwoven – Teknoweb Materials distribute this technology worldwide. In addition, Oerlikon Nonwoven – Teknoweb Materials have further refined the process into their own Levra technology – an entry-level option which offers tailored production volumes with lower investment costs but is still suitable to be upgraded to the premium Phantom model in the future.

Quality products that cost less

Essentially, Phantom technology was developed to produce hybrid substrates. The spunmelt and airlaid processes are merged into one step to combine cellulose fibers, long fibers such as cotton, or even powders with polymer fibers in unprecedented ways. This technology has clear advantages in terms of resources, performance, and cost compared to the previous processes on the market. By removing hydroentanglement, it is no longer necessary to dry the material. Adjusting the process can optimize relevant product characteristics such as softness, strength, dirt absorption, and liquid absorption. In the end, this even increases the quality of the product itself.

The greater freedom for formulating continuous and discrete fibers allows for more flexible and absorbent structures and highly textured materials. Wipes feel softer to the touch while providing more protection for the hands. Up to 90% of the material can consist of pulp fibers, although natural alternatives like cotton or synthetic fibers can be added to the mix.

Phantom technology has not only found a practical application in a variety of wipes – such as hygiene wipes, anti-bacterial wipes, surgical wipes, or industrial wipes – but also in absorbent cores, for instance indiapers or fempro products. With so many applications, Oerlikon Nonwoven – Teknoweb Materials are fully prepared to deliver Procter & Gamble’s innovative Phantom technology to the global nonwovens market.

Source:

Oerlikon Manmade Fibers

Moti Fabrics (Pvt) Ltd. Moves to Digital Production with Mimaki Tiger (c) Mimaki
The Tiger-1800B MkII, Mimaki’s flagship industrial volume textile printer
22.10.2020

Moti Fabrics (Pvt) Ltd. Moves to Digital Production with Mimaki Tiger

  •   Mimaki Tiger-1800B MkII Printers for Faster, High-Quality Textile Printing

Amsterdam - Mimaki Europe, a leading manufacturer of inkjet printers and cutting systems, announces today that Pakistani textile company, Moti Fabrics (Pvt) Ltd., is leveraging multiple Mimaki Tiger industrial textile printing units to take its business to the next level. As a result of on the outstanding performance and process optimisation delivered by the Mimaki digital printing equipment, the company has been able to adapt to changes in the textile industry and is now projected to reinforce its market position and expand its capabilities in high-quality textile production.

  •   Mimaki Tiger-1800B MkII Printers for Faster, High-Quality Textile Printing

Amsterdam - Mimaki Europe, a leading manufacturer of inkjet printers and cutting systems, announces today that Pakistani textile company, Moti Fabrics (Pvt) Ltd., is leveraging multiple Mimaki Tiger industrial textile printing units to take its business to the next level. As a result of on the outstanding performance and process optimisation delivered by the Mimaki digital printing equipment, the company has been able to adapt to changes in the textile industry and is now projected to reinforce its market position and expand its capabilities in high-quality textile production.

Headquartered in Faisalabad, Punjab province – the second largest textile hub in Pakistan –, Moti Fabrics (Pvt) Ltd. mainly serves the high fashion industry and uses its cutting-edge technology to print about 100,000 metres daily. Faced with recent challenges in the global textile market, management at Moti Fabrics (Pvt) Ltd. embarked on innovating the company’s business model, shifting from conventional to digital printing. In doing so, the company invested in Mimaki’s advanced industrial textile technology and installed three Mimaki Tiger-1800B MkII units. “We were – and still are – experiencing a massive transformation in the printing segment, with brands demanding high quality products delivered within short deadlines. This change in our customers’ requirements urged us to move to digital printing,” says Muhammad Asif, CEO at Moti Fabrics (Pvt) Ltd. “Our choice has already proved sound as our brand-new Tiger-1800B MkII printing systems have enabled us to cope with the high standards of the fashion industry in terms of both quality and delivery times. In addition, we have been able to gradually enhance our production processes in a cost-effective way.”

The Tiger-1800B MkII is Mimaki’s flagship industrial volume textile printer, available either in dye sublimation configuration for transfer printing or with reactive ink for direct-to-textile printing. Of the three Mimaki Tiger-1800B MkII solutions operating at Moti Fabrics (Pvt) Ltd., two are equipped with reactive inks, enabling the company to directly print onto natural fibres such as cotton and linen, as well as onto manufactured cellulose fibres, including rayon and nylon. The third Mimaki Tiger-1800B MkII features sublimation inks serves the ever-growing printed polyester market, allowing the company to strategically diversify its product portfolio.

“There are several features of the Tiger-1800B MkII that benefit our production and our business at large. The MAPS (Mimaki Advanced Pass System), just to name one, prevents banding and colour-shifting to deliver a higher standard of quality, while the NRS (Nozzle Recovery System) provides uninterrupted production, minimising downtime and ensuring superior results. The sticky belt system together with the large-size ink tanks (with a capacity of 10kg) and the high-performance software RIP TxLink3 are some of the other features that make these printers efficient, user-friendly and reliable,” says Asif.

Asif concludes, “Looking at the future, our aim is to set up a print department featuring only Mimaki’s technologies. We are already considering the next steps to make this possible, knowing that we can count on the support of Signtrade, Mimaki’s dealer in the region and our trustworthy partner.”

Moti Fabrics (Pvt) Ltd. was founded in 1992 by Muhammad Asif’s father Haji Muhammad Yousaf and his partner Haji Rasheed Ahmad. Established as a dyeing company, Moti Fabrics (Pvt) Ltd. was able to gradually diversify the business over the years to become an advanced textile printing specialist. Today, the company is an established provider to the high fashion industry in Pakistan and on an international level.

“The story of Moti Fabrics is incredibly inspiring. Belonging to a region with such rooted textile printing heritage, the company has been able to embrace a new, challenging business model in order to stay at pace with the changing demand from the textile industry and has succeeded,” comments Ronald van den Broek, General Sales Manager at Mimaki Europe. “Customers like Moti Fabrics make us proud as they demonstrate how our advanced Mimaki Tiger industrial textile series can be the enabling technology for those textile companies planning the shift from conventional to digital printing.”

Antiviral and antibacterial zwissCLEAN masks® of zwissTEX (c) zwissTex
zwissCLEAN MASK BASIC
21.10.2020

Antiviral and antibacterial zwissCLEAN masks® of zwissTEX

With zwissCLEAN® masks, zwissTEX is a pioneer among manufacturers of antiviral and antibacterial oronasal masks. Unlike conventional models they actively and highly effectively eliminate viruses and bacteria thanks to the latest textile technologies. This is made possible by an environmentally friendly finishing that foregoes the use of silver and zinc. "The formula physically interrupts the cell membrane of the viruses and bacteria - so no development of resistance is possible. In this way 99.9 percent of viruses and bacteria are eliminated within a very short time," says Maximilian Schönfließ - Business Development Manager of zwissTEX.

The zwissCLEAN MASK BASIC is particularly suitable when a mask is to be worn over a longer period of time - whether for school, concerts, trade fair visits or air travel. "The special feature of our zwissCLEAN MASK BASIC is that it can be worn for up to 12 hours without any problems due to the breathable material", says Schönfließ. "With it even sleeping is possible. And unlike disposable masks it can be washed up to 10 times at 30 degrees. Disposal by type is also possible".

With zwissCLEAN® masks, zwissTEX is a pioneer among manufacturers of antiviral and antibacterial oronasal masks. Unlike conventional models they actively and highly effectively eliminate viruses and bacteria thanks to the latest textile technologies. This is made possible by an environmentally friendly finishing that foregoes the use of silver and zinc. "The formula physically interrupts the cell membrane of the viruses and bacteria - so no development of resistance is possible. In this way 99.9 percent of viruses and bacteria are eliminated within a very short time," says Maximilian Schönfließ - Business Development Manager of zwissTEX.

The zwissCLEAN MASK BASIC is particularly suitable when a mask is to be worn over a longer period of time - whether for school, concerts, trade fair visits or air travel. "The special feature of our zwissCLEAN MASK BASIC is that it can be worn for up to 12 hours without any problems due to the breathable material", says Schönfließ. "With it even sleeping is possible. And unlike disposable masks it can be washed up to 10 times at 30 degrees. Disposal by type is also possible".

The zwissCLEAN MASK COMFORT is recommended for daily protection at shopping, on public transport, at business appointments or similar events. It consists of a three-layer structure and combines efficient antiviral protection with long-term wearing comfort. The outer material and the integrated fleece promote protection against viruses and bacteria. The lower material made of organic cotton guarantees a lasting pleasant feeling on the skin. The mask can be washed up to 30 times, thus replacing up to 210 disposable masks and saving resources sustainably.

Source:

zwissTex

Bandagenband (c) JUMBO Textil
20.10.2020

JUMBO-Textil: Narrow textiles with a function

Technical textiles fulfil many functions: they hold, they lift, they fixate, they stretch – and they tension. In this function narrow textiles fulfil an important task in product development. And they offer significant advantages over metal or plastic tensioning devices such as springs, clamps or cable ties.

Properties
Textiles are light: a property that plays a central role in modern mobility. Textiles are flexible: from extremely high to extremely low elasticity: the force-elongation behaviour of elasticated narrow textiles can be precisely defined. Depending on the tensioning task to be performed. Textiles tension in tight packaging spaces: elastics can also be used where space is too tight for springs and clasps. Textiles are energy efficient: lightweight, with high tensioning force. Textiles are easy to handle: replace a connector spontaneously and without tools, quickly change the length or roll up and store a supply. And textiles are sustainable: natural fibres and rubber are natural and ecologically degradable raw materials; synthetic fibres can be completely produced from recycled materials.

Technical textiles fulfil many functions: they hold, they lift, they fixate, they stretch – and they tension. In this function narrow textiles fulfil an important task in product development. And they offer significant advantages over metal or plastic tensioning devices such as springs, clamps or cable ties.

Properties
Textiles are light: a property that plays a central role in modern mobility. Textiles are flexible: from extremely high to extremely low elasticity: the force-elongation behaviour of elasticated narrow textiles can be precisely defined. Depending on the tensioning task to be performed. Textiles tension in tight packaging spaces: elastics can also be used where space is too tight for springs and clasps. Textiles are energy efficient: lightweight, with high tensioning force. Textiles are easy to handle: replace a connector spontaneously and without tools, quickly change the length or roll up and store a supply. And textiles are sustainable: natural fibres and rubber are natural and ecologically degradable raw materials; synthetic fibres can be completely produced from recycled materials.

Applications
Development teams in numerous industries leverage these properties for their products. For example, for flexible machine parts in mechanical engineering, for switch contacts in electrical engineering, for oscillation-capable locking systems in the construction industry, for noise- and vibration-free seating systems in the automotive sector or for grip rings in the toys industry.

Tasks
Particularly en vogue today, when we are spending more time than usual in our own homes: applications for narrow textiles in the furniture industry. They go far beyond the area of legacy home textiles: as tensioning elements in armchairs, sofas and chairs, as hinge solutions in cupboards, as fixation elements in extendable or folding tables. Narrow textiles are used for gripping tasks almost everywhere in the living room.

"JUMBO-Textil specialises in precisely implementing the individual requirements for defined force-elongation values of elasticated narrow textiles: we adapt the technical properties of our products precisely to the specific task and the respective raw materials," explains Werner Thiex, Sales Director Automotive. "Precise technical specification plus sustainable raw materials – this is a crucial combination in the 21st century".

Source:

stotz-design.com

Anker Carpet (c) Anker
13.10.2020

Anker, Devan and Shark Solutions develop flame retardant aviation carpet

Anker, Devan and Shark Solutions teamed up to create the world’s first flame retardant aviation carpet using a recycled binder. Inspired by the knowledge and the needs of the aviation market, Anker motivated to achieve this new goal together. The PVB binder reuses laminated glass, from windshields and architectural/building glass, that otherwise would go to landfill.

German carpet manufacturer Anker is the first company to offer flame retardant carpets for aviation that are made with a recycled binder. In the search for a more sustainable binder, Anker discovered the PVB from Shark Solutions, a Danish cleantech company focused on giving a new life to post-consumer PVB. Properties of the aviation carpet with PVB as binder are the same as those of traditional non-sustainable carpets. The market has been looking for this type of solutions for a long time and market introduction has already started. Anker will introduce well known and special developed styles of aviation carpets with PVB and plan to take out traditional non-sustainable aviation carpets stepwise as soon as possible.

Anker, Devan and Shark Solutions teamed up to create the world’s first flame retardant aviation carpet using a recycled binder. Inspired by the knowledge and the needs of the aviation market, Anker motivated to achieve this new goal together. The PVB binder reuses laminated glass, from windshields and architectural/building glass, that otherwise would go to landfill.

German carpet manufacturer Anker is the first company to offer flame retardant carpets for aviation that are made with a recycled binder. In the search for a more sustainable binder, Anker discovered the PVB from Shark Solutions, a Danish cleantech company focused on giving a new life to post-consumer PVB. Properties of the aviation carpet with PVB as binder are the same as those of traditional non-sustainable carpets. The market has been looking for this type of solutions for a long time and market introduction has already started. Anker will introduce well known and special developed styles of aviation carpets with PVB and plan to take out traditional non-sustainable aviation carpets stepwise as soon as possible.

Shark’s PVB reuses laminated glass, from windshields and architectural/building glass, that otherwise would go to landfill. The non-toxic binder (no chlorine or phthalates) is fully recyclable and thus lives up to the future standards of the industry.

Textile innovator Devan Chemicals, known for its tailor-made flame retardant solutions, was called in to develop the flame retardant back coating, which is compliant with the Airbus and Boeing safety standards. “Based on many years of experience and competences in customer related developments, improving recycling rates is getting more and more important”, says Dirk Vanpachtenbeke, R&D manager Flame Retardants at Devan. “We are very proud that, together with Anker and Shark Solutions, we can contribute to this rising demand for products that meet the standards of a circular economy solution.”

In other news, Anker and Devan are already working on a new project, which includes Devan’s antimicrobial/viral-reducing technology. Recently, Devan published test results on the activity of their technology (BI-OME®) against SARS-CoV-2 and other viruses. According to independent testing, BI-OME is proven to achieve 99% and higher virus reduction, including of SARS-COV-2, on samples before washing and retains 98.5% even after 25 wash cycles. This technology has been recognized with the 2020 European Technology Innovation Leadership Award by Frost & Sullivan.

Source:

Devan Chemicals NV / Marketing Solutions NV

(c) Tonello
12.10.2020

Tonello at DenimsandJeans Virtual Show

“When it comes to working on new developments, we always start from new ideas and the constant research that starts from a concept that becomes reality, by increasingly raising the bar of sustainability” said Alice Tonello, R&D and Marketing Director of Tonello. “The research for technologies and solutions have always been part of our DNA, is a daily commitment to the environment, the market, our people and all human beings with their needs.  Based on this vision, two revolutionary patent-pending process, are born, Wake and OBleach, that allow to create incredible and totally responsible effects on garments” continued Alice Tonello.

This is how The Laundry (R)Evolution was born: a radically new conception thought to simplify and optimize the entire garment finishing process.

It involves only 2 technologies in the entire finishing cycle, reducing waste and optimizing resources: LaserBlaze, and The All-in-One-System. Metro is used, a software that processes real data, in real time to check all laundry consumption, optimizing processing times and improving performance.

“When it comes to working on new developments, we always start from new ideas and the constant research that starts from a concept that becomes reality, by increasingly raising the bar of sustainability” said Alice Tonello, R&D and Marketing Director of Tonello. “The research for technologies and solutions have always been part of our DNA, is a daily commitment to the environment, the market, our people and all human beings with their needs.  Based on this vision, two revolutionary patent-pending process, are born, Wake and OBleach, that allow to create incredible and totally responsible effects on garments” continued Alice Tonello.

This is how The Laundry (R)Evolution was born: a radically new conception thought to simplify and optimize the entire garment finishing process.

It involves only 2 technologies in the entire finishing cycle, reducing waste and optimizing resources: LaserBlaze, and The All-in-One-System. Metro is used, a software that processes real data, in real time to check all laundry consumption, optimizing processing times and improving performance.

The All-in-One System performs all washing operations by integrating 4 sustainable technologies into a single machine: ECOfree 2, which uses ozone in both the water and air; NoStone® for authentic and pumice-free stone-wash effects; UP, for washing processes with at least 50% less water; Core, a nebulizing system improving performance and reducing water consumption.

In terms of effects, the latest results of the Laundry (R)evolution are OBleach and Wake.

OBleach is the new Tonello patent-pending process which, by using only ozone, “returns to the future” with an authentic, sustainable and cool Bleach.

Wake is the first totally natural dyeing system. In fact, it uses only plants and vegetable waste, organic items like flowers, berries and roots left to dry and infuse, without harmful chemicals additives.

Tonello will be live during DenimsandJeans Virtual Show on October 14th and 15th.

Source:

EFFE-BI SRL PR & COMMUNICATION

Oerlikon: Virtual Exhibition (c) Oerlikon
08.10.2020

Oerlikon at Innovate Textile & Apparel Virtual Trade Show

The textile machinery industry is eagerly awaiting the start of the virtual trade show "Innovate Textile & Apparel". What and how will the more than 160 exhibitors present themselves virtually? How will the approximately 10,000 registered visitors accept the digital offer? WTIN is breaking new ground as organizer with this platform. But one thing is already certain: From 15 to 30 October 2020, they will bring the textile machinery industry a little closer together again in the Corona Pandemic. Oerlikon invites all visitors to take a look into the future of manmade fibers production and get to know the comprehensive range of products and services.

The textile machinery industry is eagerly awaiting the start of the virtual trade show "Innovate Textile & Apparel". What and how will the more than 160 exhibitors present themselves virtually? How will the approximately 10,000 registered visitors accept the digital offer? WTIN is breaking new ground as organizer with this platform. But one thing is already certain: From 15 to 30 October 2020, they will bring the textile machinery industry a little closer together again in the Corona Pandemic. Oerlikon invites all visitors to take a look into the future of manmade fibers production and get to know the comprehensive range of products and services.

"Reconnecting innovation in the textile & apparel value chain" is the motto of WTIN's virtual trade show. And Oerlikon intends to more than live up to this motto. With more than 50 active experts from sales, customer service and technology as well as partners from its international network of representatives, the Manmade Fibers segment of the Swiss Oerlikon Group will try to be represented around the clock. "It is an interesting experiment for all of us and we would like to see it succeed," explains André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs. "Our aim is to meet our existing customers again, make new contacts and see 'old friends' from the industry. We have prepared an attractive digital offer for them all. Those of you who missed our roller coaster ride in Barcelona last year can now enjoy the journey through time in peace and quiet from your home office on your digital tour of the fair. And, there are no more waiting times either," promises Wissenberg.

Factory know-how from a single source
From Melt to Yarn, Fibers and Nonwovens. From the polycondensation and the processing of PTA and MEG as well as the extrusion of, for example, recycled polyester chips all the way through to hundreds of thousands of packaged and stored or directly-delivered textured bobbins for a market within the textile industry worth billions. From the planning and construction of highly complex production plants to the engineering of large-scale plant projects and competent customer services. This business model runs like a red thread through the self-conception of the Manmade Fibers segment of the Swiss Oerlikon Group. The right partner, especially – but not exclusively – for newcomers to the textile industry. "With us they get everything they need for a successful business: Factory know-how from a single source. And that's what we would like to show our visitors at our virtual trade fair booth," says Wissenberg.

World Cotton Day on 7 October Highlights the Importance of Cotton for Development Policy (c) pixabay
Cotton
07.10.2020

October, 7th: World Cotton Day

  • World Cotton Day on 7 October Highlights the Importance of Cotton for Development Policy

Bremen - Stemming from a 2019 initiative of the African Cotton-4 countries Benin, Burkina Faso, Chad and Mali, World Cotton Day will take place this year on 7 October. The event is organised by the Geneva-based World Trade Organisation (WTO) and is supported by the Food and Agriculture Organisation of the United Nations (FAO), the United Nations Conference on Trade and Development (UNCTAD), the International Trade Centre (ITC) and the International Cotton Secretariat (ICAC). The Bremen Cotton Exchange is also involved.

“Cotton is often underestimated because it is so natural. Behind it are millions of people, for example many farmers, field workers, employees in ginning factories, logistics providers and traders. We want to honour their achievements,” said the President of the Bremen Cotton Exchange, Stephanie Silber.

  • World Cotton Day on 7 October Highlights the Importance of Cotton for Development Policy

Bremen - Stemming from a 2019 initiative of the African Cotton-4 countries Benin, Burkina Faso, Chad and Mali, World Cotton Day will take place this year on 7 October. The event is organised by the Geneva-based World Trade Organisation (WTO) and is supported by the Food and Agriculture Organisation of the United Nations (FAO), the United Nations Conference on Trade and Development (UNCTAD), the International Trade Centre (ITC) and the International Cotton Secretariat (ICAC). The Bremen Cotton Exchange is also involved.

“Cotton is often underestimated because it is so natural. Behind it are millions of people, for example many farmers, field workers, employees in ginning factories, logistics providers and traders. We want to honour their achievements,” said the President of the Bremen Cotton Exchange, Stephanie Silber.

According to the WTO, the aim of World Cotton Day is to highlight the global economic importance of cotton and to raise awareness of the raw material by recognising the work of everyone involved in its cultivation, processing and trade. At the same time, within the framework of international cooperation, it is hoped that supporters and investors can be found to aid with technological and economic progress within the cotton value chain.

This time, the entire world cotton community will be involved in World Cotton Day on Wednesday, 7 October 2020. A wide variety of campaigns and events are taking place everywhere to draw attention to the importance of cotton and its possible uses.

Cotton is one of the most relevant agricultural raw materials in the world. Around 26 million tonnes of it are harvested annually. Approximately 150 million people in almost 80 countries around the world live from the cultivation of the natural fibre. A large number of these live in developing countries, where cotton cultivation is of particular importance as a cash crop.

Cotton is known as an agricultural product that is turned into a textile. The raw material is indispensable in fashion and clothing – and has been for thousands of years. But the use of cotton now goes far beyond textiles. For example, cosmetic products such as hand creams and hair shampoo are made from the oil of cotton seeds. The raw material is also used in the manufacture of banknotes, furniture and technical textiles, as well as in medical technology.

Against the background of the current discussion on sustainability and sustainable consumption, the role of natural fibres is becoming even more important. Cotton is biodegradable and a renewable resource. It can be grown again and again in agriculture through cultivation in crop rotation. This secures incomes and enables efficient value creation within the global production and processing chain.

The Bremen Cotton Exchange will actively support World Cotton Day with cross-media coverage. In addition, in time for World Cotton Day, three thematically different, emotionally appealing short films about cotton will be launched. They are aimed at consumers as customers of the textile and clothing trade and provide information about the benefits and properties of cotton and answer questions about its sustainability. In keeping with the times, they will be published via virtual media.

Mimaki Europe mit hochaktuellen Digital-Textildrucklösungen auf der Innovate Textile & Apparel Virtual Trade Show (c) Mimaki Europe
Der Mimaki TS55-1800 Sublimationsdrucker wird auf dem virtuellen Stand von Mimaki, auf der diesjährigen Textile & Apparel Trade Show, zu sehen sein.
07.10.2020

Mimaki Europe: hochaktuelle Digital-Textildrucklösungen

  • Mimaki Europe auf der Innovate Textile & Apparel Virtual Trade Show

Amsterdam - Mimaki Europe präsentiert seine neuen Textildrucklösungen an einem virtuellen Stand auf der diesjährigen Innovate Textile & Apparel Virtual Trade Show (15. bis 30. Oktober 2020). An dem virtuellen Stand können Besucher, wie bei einer konventionellen Messe, Technik in Aktion sehen und mit den Mimaki-Vertretern über neue Markttrends und Lösungen zu neuen Anforderungen sprechen. Im Mittelpunkt des interaktiven Stands stehen zwei Drucker: der TS55-1800 – Sublimationsdrucker und Mimaki-Flaggschiff – und der neue Hybriddrucker TX300P-1800 MkII. Die Besucher profitieren außerdem von exklusiven Messeaktionen, darunter ein Sonderangebot für den TS300P-1800 und die Chance auf den Gewinn eines Sublimationsdruckers der Einstiegsklasse.

  • Mimaki Europe auf der Innovate Textile & Apparel Virtual Trade Show

Amsterdam - Mimaki Europe präsentiert seine neuen Textildrucklösungen an einem virtuellen Stand auf der diesjährigen Innovate Textile & Apparel Virtual Trade Show (15. bis 30. Oktober 2020). An dem virtuellen Stand können Besucher, wie bei einer konventionellen Messe, Technik in Aktion sehen und mit den Mimaki-Vertretern über neue Markttrends und Lösungen zu neuen Anforderungen sprechen. Im Mittelpunkt des interaktiven Stands stehen zwei Drucker: der TS55-1800 – Sublimationsdrucker und Mimaki-Flaggschiff – und der neue Hybriddrucker TX300P-1800 MkII. Die Besucher profitieren außerdem von exklusiven Messeaktionen, darunter ein Sonderangebot für den TS300P-1800 und die Chance auf den Gewinn eines Sublimationsdruckers der Einstiegsklasse.

Der Sublimationsdruck ist eine bahnbrechende Technologie zum Bedrucken von Polyester, Textilien mit Polyesteranteil sowie Elastan. Er liefert hochwertige, strahlende Drucke und eignet sich für den On-demand-Betrieb. Der industrielle Produktionsdrucker TS55-1800 bietet diese Technologie, gepaart mit der von Mimaki bekannten Expertise und Innovationskraft. Zur Ausstattung gehören NCU (Nozzle Check Unit) zur Düsenprüfung und NRS (Nozzle Recovery System) zur Düsenwiederherstellung, Kerntechnologien von Mimaki, die verstopfte Düsen ohne Unterbrechung des Betriebs automatisch erkennen und ersetzen. Weiteres Technologiemerkmal: Ein MAPS (Mimaki Advanced Pass System) zur Vermeidung von Streifenbildung berechnet bei jedem Druckdurchgang mit einem speziellen Algorithmus den effektivsten Tropfenausstoß auf Basis von Farbe, Abdeckung und Geschwindigkeit.

Mit der optionalen „Mini Jumbo“-Rolle, die bis zu einem Viertel der Papierkosten sparen kann, und einem 10-Liter-Tintenbehälter bietet der Mimaki TS55-1800 die niedrigsten Betriebskosten unter seinesgleichen auf dem Markt und ist der ideale Produktionsdrucker für kleine und mittlere Unternehmen. Die Sonderaktion von Mimaki auf der Innovate Textile & Apparel Virtual Trade Show macht ihn noch attraktiver für Unternehmen, die in diesen schwierigen Zeiten ihr Angebot diversifizieren möchten.

Der Anfang des Jahres eingeführte Hybriddrucker Tx300P-1800 MkII kann Textilien und Papier bedrucken. Mit seiner beispiellosen Flexibilität erschließt er Druckdienstleistern völlig neue Möglichkeiten. Die Umstellung zwischen Textildirektdruck und Transferdruck erfolgt über eine schnell wechselbare Druckplatte. Der Drucker kann mit drei Tintenkombinationen konfiguriert werden: Textilpigment-/ Direktsublimationstinte, Textilpigment-/Sublimationstransfertinte oder Direktsublimations-/Sublimationstransfertinte. Damit bewältigt er von Mode über Heimtextilien bis hin zu Tapeten vielfältige Anwendungen. Von den Vorzügen des erschwinglichen und vielseitigen Druckers – kostengünstige Kleinauflagen, schnellere Bearbeitungszeiten und Eignung zur Produktion von Textilmustern –  können kleinere Dienstleister ebenso profitieren wie große Druckereien.

Organisator der Innovate Textile & Apparel Virtual Trade Show ist das World Textile Information Network (WTiN). Die virtuelle Messe soll Ausstellern und Besuchern eine vor den Verwerfungen der Pandemie geschützte Plattform bieten. Mimaki unterstützt diese Philosophie und freut sich auf den virtuellen Besuch von Kunden und Interessenten, die das Unternehmen mit den Messeaktionen – einschließlich der Chance auf Gewinn eines Mimaki TS30-1300-Sublimationsdruckers der Einstiegsklasse(1) – bei ihrer nächsten Investition unterstützen möchte.

„Auf der Innovate Textile & Apparel Virtual Trade Show können wir unsere Position auf dem Textilmarkt weiter stärken, mit unseren Kunden interagieren und uns mit der gesamten Branche austauschen“, erklärt Danna Drion, Senior Marketing Manager bei Mimaki Europe. „Unser Portfolio umfasst Technologien verschiedenen Typs und wir möchten die Vorteile jedes Druckers erläutern, damit Textildruckereien die richtige Technologie für ihr Geschäft finden. Trotz der schwierigen Zeiten sollen Kunden und Interessenten die Möglichkeiten unserer Lösungen möglichst detailliert kennenlernen. Wir möchten ihnen auch mit unseren Messeaktionen die Möglichkeit bieten, ihre nächste Investition mit Zuversicht zu tätigen, damit sie ihre Produktionslinie für einen weiterhin rentablen und wettbewerbsfähigen Betrieb maximieren können. Wir freuen uns, dass diese virtuelle Veranstaltung das ermöglicht.“

Auf der Innovate Textile & Apparel Virtual Trade Show stehen Experten von Mimaki rund um die Uhr für Einzelgespräche im Live-Chat zur Verfügung. Mimaki Europe, Mimaki USA und Mimaki Global arbeiten zusammen, sodass Besucher auf der ganzen Welt jederzeit Zugang zu regionalen Ansprechpartnern haben.

Symbolische Inbetriebnahme der Plattenanlage am TITK (c) TITK/Steffen Beikirch
07.10.2020

TU Ilmenau/TITK: Platten-Extrusionsanlage für gemeinsame Projekte geht in Betrieb

Die langjährige strategische Kooperation des Thüringischen Instituts für Textil- und Kunststoff-Forschung Rudolstadt e.V. (TITK) mit der Technischen Universität Ilmenau erreicht einen neuen Meilenstein: Beide Partner nahmen jetzt eine Anlage zur Herstellung thermoplastischer Leichtbauplatten in Betrieb. Damit wurde eine moderne gerätetechnische Voraussetzung geschaffen, um die Zusammenarbeit zwischen dem an der TU ansässigen Thüringer Innovationszentrum Mobilität (ThIMo) und dem TITK insbesondere im Kompetenzfeld Kunststofftechnik und Leichtbau zu erweitern.

Die Investition wird aus Mitteln des Landes Thüringen und der EU im Rahmen der Grundfinanzierung des Thüringer Innovationszentrums Mobilität (ThIMo) gefördert. In Abstimmung zwischen dem TITK und dem ThIMo und auf Grundlage eines Nutzungs- und Überlassungsvertrages wurde die Anlage im Technikum des TITK aufgestellt. Das TITK ist seit vielen Jahren An-Institut der TU Ilmenau.

Die langjährige strategische Kooperation des Thüringischen Instituts für Textil- und Kunststoff-Forschung Rudolstadt e.V. (TITK) mit der Technischen Universität Ilmenau erreicht einen neuen Meilenstein: Beide Partner nahmen jetzt eine Anlage zur Herstellung thermoplastischer Leichtbauplatten in Betrieb. Damit wurde eine moderne gerätetechnische Voraussetzung geschaffen, um die Zusammenarbeit zwischen dem an der TU ansässigen Thüringer Innovationszentrum Mobilität (ThIMo) und dem TITK insbesondere im Kompetenzfeld Kunststofftechnik und Leichtbau zu erweitern.

Die Investition wird aus Mitteln des Landes Thüringen und der EU im Rahmen der Grundfinanzierung des Thüringer Innovationszentrums Mobilität (ThIMo) gefördert. In Abstimmung zwischen dem TITK und dem ThIMo und auf Grundlage eines Nutzungs- und Überlassungsvertrages wurde die Anlage im Technikum des TITK aufgestellt. Das TITK ist seit vielen Jahren An-Institut der TU Ilmenau.

„Um unsere wissenschaftliche Zusammenarbeit voranzutreiben, läuft derzeit auch die gemeinsame Berufung der Professur Kunststofftechnik an der TU“, berichtet der geschäftsführende Direktor des TITK, Benjamin Redlingshöfer. „Damit festigen wir unsere Kooperation zwischen Grundlagenforschung auf der einen und wirtschaftsnaher Forschung auf der anderen Seite“, ergänzt der vorläufige Leiter der Uni, Prof. Dr. Kai-Uwe Sattler.

Beiden Teilbereichen der Forschung soll nun auch die neue Plattenanlage dienen. Sie kommt gemeinsamen Entwicklungsprojekten im Bereich kunststoffbasierter Halbzeuge und parallel dazu der Ausbildung von Studenten zugute. „Mit dieser Anlage wurde eine weitere Voraussetzung geschaffen, um auch den Transfer gemeinsamer Forschungsergebnisse in die Wirtschaft zu forcieren“ “, betont Prof. Dr. Klaus Augsburg, Projektleiter ThIMo an der TU Ilmenau. „Diese neu geschaffene wissenschaftlich-experimentelle Plattform ist mit unserem Technikum Kunststofftechnik passfähig“, so Augsburg weiter.

„Mit der Plattenanlage stellen wir Halbzeuge mit Faserverstärkung her, etwa aus Naturfaser-, Glasfaser- oder Carbonfaserverstärktem Kunststoff. Die Platten sollen insbesondere für Leichtbauanwendungen in verschiedenen Mobilitätssystemen zur Verfügung stehen“, sagt die zuständige Abteilungsleiterin am TITK, Dr. Renate Lützkendorf. Je nach Beschaffenheit des Ausgangsstoffs seien dabei auch Verbunde mit verschiedenen Schichten möglich.

Als Ausgangsmaterialien kommen sowohl marktverfügbare Kunststoffgranulate als auch Neuentwicklungen zum Einsatz. Darunter ein mit Partnern entwickeltes Granulat aus recycelten Carbonfasern. Speziell mit diesem Material lässt sich einerseits eine sehr hohe Steifigkeit erreichen. „Andererseits kann damit auch das Thema Leitfähigkeit oder Abschirmung erschlossen werden. So lassen sich Platten mit funktionellen Eigenschaften produzieren“, ergänzt Lützkendorf.

Erforscht werden zudem komplette Prozesse zur Herstellung neuer Faserverbundhalbzeuge. Dabei stehen verschiedene Aspekte im Mittelpunkt. „Zum Beispiel die Auswirkung von Füllstoffen auf die Plattenqualität und ihre Funktion, die Dicken, mit der diese Halbzeuge herstellbar sind, und ob sich die Platten auch schäumen lassen, um noch weiteres Gewicht einzusparen“, erläutert Dr. Thomas Reußmann, stellvertretender Abteilungsleiter am TITK.

Neben einer wesentlichen Zielgruppe beider Partner, der Automobilindustrie, können auch Themen anderer Branchen, wie z.B. der Verpackungsmittelindustrie bedient werden. Die Entwicklungsergebnisse werden durch Materialprüfungen am TITK und am ThiMo evaluiert.

Source:

TITK

Monforts texCoat coating system (c) Monforts / AWOL Media
06.10.2020

Monforts at Innovate Textile & Apparel (ITA) 2020

During the Innovate Textile & Apparel (ITA) virtual textile machinery show which will run from October 15th-30th 2020, Monforts will be emphasising its leadership position in three key fields – advanced coating, denim finishing and fabric sanforizing.

With its multi-head capability, the latest Monforts texCoat coating system provides flexibility with an unprecedented range of options and a wide range of modules available.

Refinements
“Since we acquired the coating technology that our systems are based on we have made a lot of refinements and all of them are reflected in higher coating accuracy and the resulting quality of the treated fabrics,” says Monforts Head of Technical Textiles, Jürgen Hanel.
“Our systems have the shortest fabric path from the coating unit into the stenter and we have all variations of coating application systems too – and all of these options are available in wider widths, with the engineering and manufacturing from a single source here in Europe.”

During the Innovate Textile & Apparel (ITA) virtual textile machinery show which will run from October 15th-30th 2020, Monforts will be emphasising its leadership position in three key fields – advanced coating, denim finishing and fabric sanforizing.

With its multi-head capability, the latest Monforts texCoat coating system provides flexibility with an unprecedented range of options and a wide range of modules available.

Refinements
“Since we acquired the coating technology that our systems are based on we have made a lot of refinements and all of them are reflected in higher coating accuracy and the resulting quality of the treated fabrics,” says Monforts Head of Technical Textiles, Jürgen Hanel.
“Our systems have the shortest fabric path from the coating unit into the stenter and we have all variations of coating application systems too – and all of these options are available in wider widths, with the engineering and manufacturing from a single source here in Europe.”

CYD
Denim finishing is meanwhile a field in which Monforts has an undisputed lead and it has been working closely with its many partners in the key denim manufacturing countries of Bangladesh, Brazil, China, India, Mexico Pakistan and Turkey to develop advanced solutions. The latest of these is the CYD yarn dyeing system.
“CYD is based on the proven Econtrol® dyeing system for fabrics*,” explains Monforts Head of Denim Hans Wroblowski. “It integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity. The CYD system has been developed in response to a very strong market demand.”

Pre-shrinking
Monforts has also recently delivered a significant number of its latest Monfortex sanforizing lines to customers around the world.
Sanforizing is vital to final fabric quality, pre-shrinking it by compressing prior to washing, to limit any residual or further shrinkage in a made-up finished garment to less than 1%, for perfect comfort and fit over an extended lifetime.

As with industry-leading Montex stenters, Monfortex lines benefit from the latest Qualitex 800 control system which allows all parameters to be easily automated via the 24-inch colour touchscreen, including production speed, control of all fabric feed devices, rotation spray or steaming cylinder options, the width of the stretching field and the rubber belt pressure. Up to 10,000 separate process parameter records can be generated and stored by the data manager.

 

*Econtrol® is a registered mark of DyStar Colours Distribution GmbH, Germany.

With the PFAFF 4520, engineers and technicians from PFAFF have designed a full-automatic production line (CE compliant) for processing multi-layer disposable masks, which meets the requirements of "German engineering" in a unique way. (c) PFAFF
PFAFF 4520: Full-automatic mask production unit
05.10.2020

PFAFF 4520: Full-automatic mask production unit

With the PFAFF 4520, engineers and technicians from PFAFF have designed a full-automatic production line (CE compliant) for processing multi-layer disposable masks, which meets the requirements of "German engineering" in a unique way. The product combines 150 years of expertise in joining textile materials and a concentrated know-how of the PFAFF INDUSTRIAL and KSL brands in the areas of process control, automation and robotics.

The PFAFF 4520 is an investment in a robust and sophisticated production line (MADE IN GERMANY) with an exceptionally reliable working process. In times of Covid-19 it is so important to rely on the right equipment for the mask production and avoid costly readjustments or an unnecessary second investment!

Key facts of the unit:

With the PFAFF 4520, engineers and technicians from PFAFF have designed a full-automatic production line (CE compliant) for processing multi-layer disposable masks, which meets the requirements of "German engineering" in a unique way. The product combines 150 years of expertise in joining textile materials and a concentrated know-how of the PFAFF INDUSTRIAL and KSL brands in the areas of process control, automation and robotics.

The PFAFF 4520 is an investment in a robust and sophisticated production line (MADE IN GERMANY) with an exceptionally reliable working process. In times of Covid-19 it is so important to rely on the right equipment for the mask production and avoid costly readjustments or an unnecessary second investment!

Key facts of the unit:

-    Size of the mask: 175 x 95 mm
-    Output:  3,500 – 4,000 masks per hour
-    1-, 2- or 3 ply processing  (Non-woven/filtration fabric)
-    SPS (PLC) control of the entire mask system
-    Exceedingly quiet working process of the whole unit
-    Ultrasonic welding components from German manufacturers
-    Protective housing for occupational safety of the operator
-    Packing station + printing station for personalized masks (on request)

The machine package also includes important features in the pre- and after sales:

PFAFF technicians ensure the adjustment of the desired customer material (non-woven or similar filter material) and the number of layers (1-, 2-, 3-ply) to the machine and make a "Ready to production" installation of the whole unit at the customer.  A fast service response time in after-sales (by involvement of the PFAFF sales- and service partner on site) ensures a maximum production output.

JUMBO Exoskeleton (c) JUMBO-Textil
01.10.2020

Jumbo Textil: Textile solutions for Exoskeletons

Elastics for power support in medicine and the work environment
People who do physically hard work are relieved; people who are learning how to walk again after an accident or a stroke receive support; people with a handicap gain greater mobility – exoskeletons offer valuable support in many areas. An important component for "power suits": elastics by JUMBO-Textil.

Support construction with and without drive
An exoskeleton is a kind of robot that you wear: a construction of mainly textile components that is slipped over the body and strapped on. Integrated sensors register the body movements. These impulses are converted into electrically driven movements of the exoskeleton, which support or amplify the human movement. In addition, exoskeletons without drive are also being developed: these designs aim to transfer the weight of heavy tools or loads directly into the ground.

Elastics for power support in medicine and the work environment
People who do physically hard work are relieved; people who are learning how to walk again after an accident or a stroke receive support; people with a handicap gain greater mobility – exoskeletons offer valuable support in many areas. An important component for "power suits": elastics by JUMBO-Textil.

Support construction with and without drive
An exoskeleton is a kind of robot that you wear: a construction of mainly textile components that is slipped over the body and strapped on. Integrated sensors register the body movements. These impulses are converted into electrically driven movements of the exoskeleton, which support or amplify the human movement. In addition, exoskeletons without drive are also being developed: these designs aim to transfer the weight of heavy tools or loads directly into the ground.

Tough requirements, individual solutions
Since the skeletons are worn on the body, the textiles and textile components used here need to be skin-friendly and as light as possible. The body's own temperature regulating systems must not be impeded. The contact surfaces must not create pressure points. And the exoskeletons must be individually adaptable to the user's body measurements.

High-tech elastics by JUMBO-Textil offer solutions for the development of exoskeletons – in terms of functionality, safety and wearing comfort: they hold, clamp, close and secure. They relieve and cushion movements and force impact. They illuminate and forward signals. The breathable narrow textiles stretch in both directions as required. They fit snugly on the body and follow every movement. Full-surface hook-and-loop-ready elastic tapes offer a simple, secure and individually adjustable fastening option. JUMBO-Textil consistently uses components made of plastic or light metal for textile components as fastening solutions. As a solution partner for demanding tasks – e.g., in occupational safety – JUMBO-Textil also developes cooled or heated textiles in collaboration with their customers. Also possible: the development of self-luminous narrow textiles – for additional safety.

Source:

(c) stotz-design.com GmbH & Co. KG

The CHT Group is constantly expanding its sustainable product range for a circular economy according to the Cradle to Cradle principles (c) CHT
Cradle to Cradle principles in the CHT Group
30.09.2020

Cradle to Cradle principles in the CHT Group

  • The CHT Group is constantly expanding its sustainable product range for a circular economy according to the Cradle to Cradle principles

Progress in itself does not necessarily have to be sustainable but in the CHT Group it certainly does. For this reason the company has defined progress more precisely. The developers and chemists from Tübingen show true inventive talent with sustainable innovations.

According to the CHT Group's self-perception, sustainable innovation always includes a responsibility component for the future. With decades of experience along the textile value chain, the globally active CHT Group offers an incomparably wide range of services focusing on sustainable, resource-saving and forward-looking speciality chemicals and the efficient shaping of textile processes.

  • The CHT Group is constantly expanding its sustainable product range for a circular economy according to the Cradle to Cradle principles

Progress in itself does not necessarily have to be sustainable but in the CHT Group it certainly does. For this reason the company has defined progress more precisely. The developers and chemists from Tübingen show true inventive talent with sustainable innovations.

According to the CHT Group's self-perception, sustainable innovation always includes a responsibility component for the future. With decades of experience along the textile value chain, the globally active CHT Group offers an incomparably wide range of services focusing on sustainable, resource-saving and forward-looking speciality chemicals and the efficient shaping of textile processes.

The circular economy takes over a decisive role: In the CHT Group we are convinced that recyclable textile products are the right means to protect resources and reduce the environmental impact. Therefore, our team works closely with textile manufacturers and brands to achieve the common goal of avoiding waste and harmful substances along the textile production process and thus producing more ecological textiles.

The Cradle to Cradle approach provides a trend-setting concept in the textile world that perfectly fits the company's sustainable strategy: Right from the start products shall be created which are suited for the biological (compostable) or technical (recyclable) circulation.

The CHT Group focuses on the development of dyes, pigments and auxiliaries for textile finishing which can be decomposed without leaving any residues and easily returned to the natural circulation.

For textiles which are to be developed and produced strictly according to the Cradle to Cradle principle, CHT offers a comprehensive, constantly growing, compostable range for textile finishing. With 57 textile auxiliaries and 32 dyes/pigments CHT has succeeded in achieving the highest rating, the Platinum Material Health Certificate of the Cradle to Cradle Products Innovation Institute.

These products help textile manufacturers to achieve the Platinum rating in Material Health, one of five categories of the Cradle to Cradle Certified™ product standard on finished textiles. This contributes to giving textiles a positive ecological footprint.

Textiles can be given the decisive distinguishing feature through the Cradle to Cradle Certified™ product standard. Cradle to Cradle Certified™ is the world's leading science-based standard for safe, recyclable and sustainable materials and products. CHT offers the possibility of designing tomorrow's sustainable textiles already today and is therefore part of the Circular Economy.

Cradle to Cradle Certified™ is a registered trademark of the Cradle to Cradle Products Innovation Institute.

Source:

 CHT Germany GmbH

VacuFil (c) Oerlikon
24.09.2020

Recycling becomes a focus

Mountains of waste, plastic-infested oceans, negative CO2 footprints – the need for more sustainable ways of living has never been more urgent. Consequently, it is logical that recycling solutions are becoming increasingly important within the textile industry. This was also tapped into at the first virtual Global Fiber Congress in Dornbirn with a session that focused specifically on the topic. In front of around 400 participants, Markus Reichwein, Head of Product Management at Oerlikon Barmag, also spoke about solutions currently on the market.

As one of only manufactureres, the Oerlikon Group’s Manmade Fibers segment offers the entire mechanical recycling chain –from preparing the recycled materials, producing the melt all the way through to the textured package. Here, the company utilizes the VacuFil solution supplied by its subsidiary Barmag Brückner Engineering (BBE) –which, in addition to mastering bottle-to-bottle and bottle-to-textile processes, is also able to process textile waste into chips. This permits the running of textile production operations very much in line with the zero-waste philosophy.

Mountains of waste, plastic-infested oceans, negative CO2 footprints – the need for more sustainable ways of living has never been more urgent. Consequently, it is logical that recycling solutions are becoming increasingly important within the textile industry. This was also tapped into at the first virtual Global Fiber Congress in Dornbirn with a session that focused specifically on the topic. In front of around 400 participants, Markus Reichwein, Head of Product Management at Oerlikon Barmag, also spoke about solutions currently on the market.

As one of only manufactureres, the Oerlikon Group’s Manmade Fibers segment offers the entire mechanical recycling chain –from preparing the recycled materials, producing the melt all the way through to the textured package. Here, the company utilizes the VacuFil solution supplied by its subsidiary Barmag Brückner Engineering (BBE) –which, in addition to mastering bottle-to-bottle and bottle-to-textile processes, is also able to process textile waste into chips. This permits the running of textile production operations very much in line with the zero-waste philosophy.

VacuFil ensures a stable process in the case of recycled quality yarns
The reliable removal of contaminants is vital for a stable and efficient spinning process and outstanding yarn quality. At the same time, stable operating conditions with minimal fluctuations are essential. The greatest challenge here is the differing qualities of the bottle flakes fed into the system, as the extrusion process is barely able to balance these fluctuations. Here, the VacuFil concept counters with blending silos, which reduce the differences in the viscosity of the polymers considerably and guarantee high yarn and fabric quality.

The VacuFil concept is installed upstream to an Oerlikon Barmag POY system, which transforms the recycled melt into filament yarn of the accustomed high quality. As texturing solutions, Oerlikon Barmag offers its state-of-the-art automatic eAFK-series systems, including the latest generation of the eAFK Evo, which was unveiled at the ITMA Barcelona last year. Yarn manufacturers wishing to continue texturing manually can use the eFK series.

With the VarioFil R+, producers of smaller batches now also have a compact system with an integrated recycled materials preparation unit at their disposal. The system offers a special extrusion system for bottle flake materials, the very latest metering and mixing technology for spin-dying and expanded 2-stage melt filtration. The four spinning positions are each equipped with an Oerlikon Barmag 10-end WINGS POY winder.

While mechanical recycling has already been extensively developed, chemical recycling for mixed fabrics is still presenting the textile industry with huge challenges. The Oerlikon Group’s Manmade Fibers segment is currently working on solutions and concepts for transforming these fabrics into new textiles.

 

More information:
Oerlikon Sustainability Yarns
Source:

Oerlikon

Baldwin installs six precision spray systems in 60 days for textile manufacturers (c) Baldwin Technology Company Inc.
Baldwin’s TexCoat G4 precision spray system produces ideal results in fabric finishing, because the exact required amount of water and chemistry is always applied.
22.09.2020

Baldwin: six precision spray systems in 60 days for textile manufacturers

  • Fabric finishing and sanforization systems installed in the US and Turkey to enhance productivity

ST. LOUIS - Baldwin Technology Company Inc. has successfully installed six new fabric finishing and sanforizing precision spray systems in the US and Turkey. Despite the COVID-19 pandemic, the installations were completed in just 60 days, thanks to close collaboration between onsite Baldwin textile team members, local agents and remote support from the company’s product and technology center in Sweden.
For textiles, non-wovens and technical textiles, Baldwin’s precision spray technology processes a wide range of low-viscosity water-based chemicals, such as softeners, anti-microbial agents, water repellents, oil  repellents, flame retardants and more.

  • Fabric finishing and sanforization systems installed in the US and Turkey to enhance productivity

ST. LOUIS - Baldwin Technology Company Inc. has successfully installed six new fabric finishing and sanforizing precision spray systems in the US and Turkey. Despite the COVID-19 pandemic, the installations were completed in just 60 days, thanks to close collaboration between onsite Baldwin textile team members, local agents and remote support from the company’s product and technology center in Sweden.
For textiles, non-wovens and technical textiles, Baldwin’s precision spray technology processes a wide range of low-viscosity water-based chemicals, such as softeners, anti-microbial agents, water repellents, oil  repellents, flame retardants and more.

These systems enable fabric producers to significantly reduce chemical and water consumption, while speeding up production times and eliminating production steps, including drying and bath changeovers when switching fabric colors. “Our customers are major manufacturers in fabric dying, finishing and remoistening, and we want to provide outstanding service and support—even in times like this,” said Rick Stanford, Business Development Leader at Baldwin and the commercial leader of the US installations. “Not only does our precision spray technology enhance productivity in their process, but there is also zero waste, which goes hand-in-hand with the increased sustainability focus in the textile industry.”

In North Carolina, two new TexCoat G4 precision spray systems are now in production with major international vertical manufacturers of outdoor living, performance fabrics and automotive fabrics. In Georgia, a major vertical manufacturer of workwear and protective fabrics installed a sanfor precision spray system, which has helped the customer obtain deeper penetration of moisture into fabrics treated with durable water repellents. In Turkey, three new TexCoat G4 systems were installed in Çorlu, northwest of Istanbul, for a large producer of knit fabrics, such as T-shirts. “In Turkey, the manufacturer purchased and installed one TexCoat G4 system before COVID-19, and the customer was so pleased with the results that, during the pandemic, three more were purchased,” said Simone Morellini, Sales Manager- EMEAR at Baldwin and the commercial leader of the Turkish installations. “The systems were manufactured and installed during the lockdown, and now, all four systems are up and running, and being used heavily on a daily basis.” “With the success we have seen, we plan to apply the same strategies for upcoming installations, including the next one in Honduras: strong local management and customer coordination, combined with  effective remote support during the installation,” said Stanford.

Source:

Baldwin Technology Company Inc.

Kooperation AMAC und FINNESTER (c) Finnester
Finnester’s innovative fire protection coatings in action
21.09.2020

Cooperation AMAC and FINNESTER

  • Finnish coating and gelcoat manufacturer Finnester strengthens its activities in the D-A-CH region with AMAC

As of September 15th 2020, the Finland-based coating and gelcoat manufacturer Finnester Coatings Oy strengthens its activities in German speaking countries, the so-called D- A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC.

Finnester is a pioneer in developing high-quality coatings and gelcoat for both urface spread as well as flame and thermal insulation of composite solutions in different fields of industries. Their portfolio comprises products based on Polyester coatings for fire and thermal protection as well as ceramifying polymers like HybridRED, compliant with the requirements of the standards e.g. EN45545-2. In
order to develop new business opportunities in the D-A-CH region for the endmarkets building and infrastructure, transportation, marine, industrial and electrical industries, Finnester is cooperating with AMAC to accelerate the process of locating suitable partnerships.

  • Finnish coating and gelcoat manufacturer Finnester strengthens its activities in the D-A-CH region with AMAC

As of September 15th 2020, the Finland-based coating and gelcoat manufacturer Finnester Coatings Oy strengthens its activities in German speaking countries, the so-called D- A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC.

Finnester is a pioneer in developing high-quality coatings and gelcoat for both urface spread as well as flame and thermal insulation of composite solutions in different fields of industries. Their portfolio comprises products based on Polyester coatings for fire and thermal protection as well as ceramifying polymers like HybridRED, compliant with the requirements of the standards e.g. EN45545-2. In
order to develop new business opportunities in the D-A-CH region for the endmarkets building and infrastructure, transportation, marine, industrial and electrical industries, Finnester is cooperating with AMAC to accelerate the process of locating suitable partnerships.

Ari Hokkanen, CEO of Finnester: “Finnester has developed unique high-quality coatings. The cooperation with AMAC will accelerate our growth ambitions and supports us in finding new business opportunities. We are happy to benefit from AMAC and Dr. Effing’s long-term experience as a pioneer in the composites industry and his high-quality network along the entire value chain.” Dr. Effing, CEO of AMAC GmbH confirms: “Fire-retardant coatings are very important to the composites industry in order to be successful especially in rail, fast ferry and building & infrastructure applications with their tough fire standards. The DACH region represents more than 30 % of the European market and is the key target for Finnester. I am looking forward to supporting Finnester with their unique offerings and connecting them with key players in the D-A-CH region.”

More information:
Finnester Coatings Oy AMAC
Source:

AMAC GmbH

Coating expertise brings sustainable comfort and convenience to the face mask (c) A. Monforts Textilmaschinen GmbH & Co. KG
The masks are based on 100% woven cotton and the active ingredients in the finish are a reaction mass of titanium dioxide and silver chloride
21.09.2020

Coating expertise brings sustainable comfort and convenience to the face mask

  • Gorilla Protect is a new company formed in May this year to promote the Catus face mask – a major leap forward in the effectiveness of personal protection products that are available to consumers in the fight against Covid-19.
  • Behind Catus and the new company is Nova Textil, the established fabric finishing company based in Grefrath, Germany, and now run by father and son team Rainer and Oliver Hurtz.

Single stenter

Rainer Hurtz founded Nova Textil with a single Monforts Montex stenter and just five employees in 1999 and has steered its constant development and growth over the past twenty years.

“Our initial focus was on the coating of mainly glass fibre fabrics, awnings and sun protection products for outdoor furnishings,” he said. “We had a great customer who was providing us with so many orders that by 2005 we took the decision to order a second Montex stenter, in a special configuration. This also allowed us to enter the market for blackout and digital printing fabrics. We’ve had a great ongoing relationship with Monforts from the beginning.”

  • Gorilla Protect is a new company formed in May this year to promote the Catus face mask – a major leap forward in the effectiveness of personal protection products that are available to consumers in the fight against Covid-19.
  • Behind Catus and the new company is Nova Textil, the established fabric finishing company based in Grefrath, Germany, and now run by father and son team Rainer and Oliver Hurtz.

Single stenter

Rainer Hurtz founded Nova Textil with a single Monforts Montex stenter and just five employees in 1999 and has steered its constant development and growth over the past twenty years.

“Our initial focus was on the coating of mainly glass fibre fabrics, awnings and sun protection products for outdoor furnishings,” he said. “We had a great customer who was providing us with so many orders that by 2005 we took the decision to order a second Montex stenter, in a special configuration. This also allowed us to enter the market for blackout and digital printing fabrics. We’ve had a great ongoing relationship with Monforts from the beginning.”

A third Montex stenter line was installed at the company’s Grefrath plant in 2015, by which time the company had grown to 40 people and a major new market had opened up in the supply of fabrics for promotional materials at exhibitions and trade shows.

“We had a fantastic two years in 2018 and 2019 and everything was going great for the first three months of this year, but in April it all came crashing down,” said Oliver Hurtz. “Coronavirus put an end to trade shows in 2020, which had a very serious impact on our business.”

At the same time, however, the company was exploring the potential of a new biocidal product from one of its chemicals suppliers which has both antiviral and antimicrobial properties.

Filtration

“We had already been producing coated fabrics for hot gas filtration and realised that in combination with this new microporous coating we had the basis for a very effective single-layer face mask,” Rainer said. “Achieving this with a single layer product rather than the usual three has resulted in a significant advance in comfort for the wearer and because the mask is able to disinfect itself and helps regulate humidity, it can be worn a number of times without needing to be washed, for greater convenience. It only needs to be washed when it gets dirty and can also be washed up to twenty times without losing its properties, which has to be preferable to single-use disposables.”

Catus face masks are based on 100% woven cotton and the active ingredients in the finish are a reaction mass of titanium dioxide and silver chloride certified to ISO 20743 for their antibacterial effect, and to ISO 18184 for their antiviral effect.

They are proven to  eliminate over  99.99% of the human coronavirus 229 E, with the multiplication of microorganisms such as germs and bacteria prevented by the biostatic action of silver salts and viruses destroyed by oxygen-releasing substances and a mechanism that attacks their fatty envelope. The virus membrane loses its cholesterol content and the virus is inactivated.

Colours

Gorilla Protect next plans to make the masks available in four colours – black, Bordeaux, olive and grey – and is also working on colour branding and printing labels.

“It’s not possible to print on the surface of the mask after it has been coated, but its is possible for volume orders to be printed before the treatment,” Oliver Hurtz said.

“Face masks are going to become an established part of life in the West like they are in Asia and need to be as comfortable and convenient as possible for the wearer,” his father concluded. “With these things in mind, we believe Catus is a significant step forward.”

Huntsman Textile Effects Delivers Sustainable Solution For Wool Dyeing: Lanasol® Ce Dyes, The Effective Alternative To After- Chrome Dyes (c) Huntsman Corporation
LANASOL® CE
02.09.2020

Huntsman Textile Effects Delivers Sustainable Solution For Wool Dyeing: Lanasol® Ce Dyes, The Effective Alternative To After- Chrome Dyes

Optimum wool dyeing solution aligned to ZDHC MRSL standards

Singapore – Huntsman Textile Effects’ LANASOL® CE dyes, provide the industry with the sustainable alternative to after-chrome dyes for wool. LANASOL® CE dyes offer a consistent, safe and reliable dyeing process that can effectively replace chrome dyes for wool. This helps mills conform to ZDHC MRSL standards and meet the stringent requirements of global brands and retailers.
The use of Chrome VI, including Dichromate, is banned in the ZDHC Manufacturing Restricted Substances List (ZDHC MRSL). Wool processors working for brands and retailers that have adopted ZDHC MRSL must therefore act quickly to finalize their chrome replacement developments.

Developed by Huntsman Textile Effects specifically to meet these challenges, LANASOL® CE is a state-of-the-art chrome-free dye range that allows mills to discontinue the use of after-chrome dyes. LANASOL® CE outperforms traditional after-chrome dyes across the board – at every level of dyeing and processing.

Optimum wool dyeing solution aligned to ZDHC MRSL standards

Singapore – Huntsman Textile Effects’ LANASOL® CE dyes, provide the industry with the sustainable alternative to after-chrome dyes for wool. LANASOL® CE dyes offer a consistent, safe and reliable dyeing process that can effectively replace chrome dyes for wool. This helps mills conform to ZDHC MRSL standards and meet the stringent requirements of global brands and retailers.
The use of Chrome VI, including Dichromate, is banned in the ZDHC Manufacturing Restricted Substances List (ZDHC MRSL). Wool processors working for brands and retailers that have adopted ZDHC MRSL must therefore act quickly to finalize their chrome replacement developments.

Developed by Huntsman Textile Effects specifically to meet these challenges, LANASOL® CE is a state-of-the-art chrome-free dye range that allows mills to discontinue the use of after-chrome dyes. LANASOL® CE outperforms traditional after-chrome dyes across the board – at every level of dyeing and processing.

“LANASOL® CE dyes have always been recognized as the leading brand in the wool industry. Our innovative dyeing auxiliaries and successful dyeing systems with LANASOL® CE provide the highest technical performance, helping customers to protect the natural beauty of wool, achieve water, energy and time savings while rendering chrome dyes obsolete,” said Alessandro Larghi, Global Marketing Manager for Wool at Huntsman Textile Effects.

As a champion of a sustainable textile industry, Huntsman Textile Effects has long been a strong advocate for the shift away from after-chrome dyes. Huntsman Textile Effects first introduced LANASOL® CE in 1997, before the introduction of any regulation on the restricted use of dichromate.