From the Sector

Reset
6 results
05.10.2023

EURATEX and CIE warn EU Presidency about de-industrialised Europe

Ahead of the extra-ordinary Council on 6 October in Granada, EURATEX President, Alberto Paccanelli, and CIE President, Jose Vte Serna, call on the EU Presidency to develop a new competitiveness strategy, which can relaunch the European industry and ensure it will remain competitive in the decades to come. This means bringing together trade, energy, state aid and sustainability policies into a single, integrated, comprehensive approach, which can support a robust and modern European manufacturing industry.  
 
To consolidate a strong industrial structure in Europe, the Union should

Ahead of the extra-ordinary Council on 6 October in Granada, EURATEX President, Alberto Paccanelli, and CIE President, Jose Vte Serna, call on the EU Presidency to develop a new competitiveness strategy, which can relaunch the European industry and ensure it will remain competitive in the decades to come. This means bringing together trade, energy, state aid and sustainability policies into a single, integrated, comprehensive approach, which can support a robust and modern European manufacturing industry.  
 
To consolidate a strong industrial structure in Europe, the Union should

  1. secure the supply of clean energy at a competitive cost;
  2. support innovation and foster the necessary talent pool and
  3. be more assertive in achieving an international level-playing field on sustainability, based on the European model.  

During the past few years the implementation of incoherent and conflicting objectives under the trade, energy, industrial and sustainability policy has been observed. As a matter of fact, while the circular economy promised to be a recipe for a competitive industry of the future, the likelihood of pushing the EU industry out of the market and driving investment elsewhere than in Europe is very high. If this approach were to continue in the next years, it will result in a de-industrialised Europe, depending on imports from abroad. Such a Europe would be more exposed to geopolitical turmoil, with no agency to deliver its vision of peace, well-being and a healthy environment to its citizens.

It is fundamental for Europe to pursue a more coherent set of policies that put the competitiveness of its domestic industry at the core. In this context, all the industrial manufacturing sectors should be in the scope, including the textile industry, given its importance in providing essential products and applications to our society. A first impactful action that can be taken in this direction, would be to expand the scope of the Net-Zero Industry Act (NZIA) to include the textiles and clothing industry.
 
The history of European industry is fully woven in the birth and expansion of the European textiles industry since the XVIII century. Still today, the European textiles and clothing industry holds a pivotal position in the market, encompassing a diverse range of sectors and applications. In terms of employment, our industry creates 1,3 million direct jobs in Europe, encompassing a wide range of roles, from design and production to distribution and retail. European textiles have a wide range of applications, the most common one is of course clothing and fashion. The industry has a long history of producing high-quality apparel, with various regions specializing in specific niches.
 
Beyond clothing, there is a wide range of industrial sectors were textiles play an essential role, including  Automotive (used for upholstery, interior components, and even lightweight composite materials), Aircraft and Shipbuilding (where textiles are employed for their lightweight and high-strength properties, to enhance fuel efficiency, reduce emissions, and improve overall performance), Building and Construction (insulation, roofing, geotextiles, and architectural textiles), or Personal Protective Equipment, for medical personnel, firefighters, police and army officers. This includes masks, gowns, uniforms, helmets, and fire-resistant clothing, ensuring safety in hazardous environments.
 
Textiles are essential components of our society and our well-being. It is key for Europe to maintain its capacity to manufacture high-quality, sustainable and high-technology textiles.  With this in mind, the competitiveness policy of the future and the related funds to support it, should include the textile ecosystem in its scope.  

 

More information:
Euratex EU council Policy Hub
Source:

Euratex

(c) Source Fashion by Hyve
21.04.2023

Source Fashion returns July 2023

Source Fashion returns to London Olympia on 16-18th July, more than doubling in size and welcoming over 300 exhibitors from around the world.

Source Fashion offers a platform for decision-makers in buying, sourcing and procurement, with the reassurance of knowing that every exhibitor has been audited to ensure sustainability and transparency remains at the heart of their business model. The February launch show welcomed over 130 manufacturers from 20 countries including the UK, Peru, Cambodia, Pakistan, Turkey, China, India, Portugal, Hong Kong, Italy, and Greece, attracting nearly 5,000 visitors from leading retailers and brands including John Lewis, M&S, Sainsbury’s, Tesco, All Saints, Asos, Ted Baker, Bella Freud, FILA, Fred Perry, Matalan, Monsoon, Stitch Fix, Urban Outfitters, Very Group, and many more.

Source Fashion returns to London Olympia on 16-18th July, more than doubling in size and welcoming over 300 exhibitors from around the world.

Source Fashion offers a platform for decision-makers in buying, sourcing and procurement, with the reassurance of knowing that every exhibitor has been audited to ensure sustainability and transparency remains at the heart of their business model. The February launch show welcomed over 130 manufacturers from 20 countries including the UK, Peru, Cambodia, Pakistan, Turkey, China, India, Portugal, Hong Kong, Italy, and Greece, attracting nearly 5,000 visitors from leading retailers and brands including John Lewis, M&S, Sainsbury’s, Tesco, All Saints, Asos, Ted Baker, Bella Freud, FILA, Fred Perry, Matalan, Monsoon, Stitch Fix, Urban Outfitters, Very Group, and many more.

Suzanne Ellingham, Director of Sourcing of Source Fashion; “We couldn't have asked for a better first show. Leading retailers attended keen to source new, and crucially audited, producers and manufacturers. We champion responsibility, and sustainability isn’t just an addition to our show, it is our core value. We unite manufacturers practicing environmental, transparent, and fair-trade methods, with buyers looking to source sustainably.

“Our next show will be even bigger and better – we have already doubled the size of our floorplan for July and have been overwhelmed by the interest from both exhibitors and visitors. The global sustainability market is expected to grow by 24% annually in the next seven years according to Meta, which means now more than ever, brands are on the hunt for new sustainable manufacturers and suppliers to source from and the growth rate is staggering for Source Fashion. It is going to be firmly established as a significant platform for responsible sourcing by its second show.”

Source:

Source Fashion by Hyve / Good Results

21.12.2022

NCTO: U.S. Senate passes bill for American-made essential products

The National Council of Textile Organizations (NCTO) commends the Senate for passing the Fiscal Year 2023 National Defense Authorization Act (NDAA), which includes a key provision aimed at spurring more government procurement of domestically produced essential products, providing a significant benefit to the U.S. textile industry.

“We applaud the Senate for getting the NDAA across the finish line today, and we are pleased the legislation will now go to President Biden for his signature,” said NCTO President and CEO Kim Glas. “The underlying NDAA conference report includes a critical bill known as the Homeland Procurement Reform (HOPR) Act, which establishes specific criteria that the Department of Homeland Security (DHS) must meet to procure more domestically manufactured uniforms, footwear, and related critical items by DHS agencies.”

The National Council of Textile Organizations (NCTO) commends the Senate for passing the Fiscal Year 2023 National Defense Authorization Act (NDAA), which includes a key provision aimed at spurring more government procurement of domestically produced essential products, providing a significant benefit to the U.S. textile industry.

“We applaud the Senate for getting the NDAA across the finish line today, and we are pleased the legislation will now go to President Biden for his signature,” said NCTO President and CEO Kim Glas. “The underlying NDAA conference report includes a critical bill known as the Homeland Procurement Reform (HOPR) Act, which establishes specific criteria that the Department of Homeland Security (DHS) must meet to procure more domestically manufactured uniforms, footwear, and related critical items by DHS agencies.”

“NCTO sincerely thanks the Warrior Protection and Readiness Coalition (WPRC) and the coalition of industry and labor groups who helped secure inclusion of the HOPR Act in the NDAA,” Glas said. “This common-sense bill will ensure that key divisions of the DHS can procure American-made critical uniforms and protective equipment to support the execution and enforcement of their missions.”

Glas added, “The importance of the domestic textile industry and a warm industrial base was heightened during the pandemic when the industry pivoted overnight to retool production lines to address severe shortages of lifesaving products. That experience demonstrated how imperative it is to build and expand a permanent domestic manufacturing base for our country’s health and national security. The HOPR Act is poised to provide a greatly needed demand signal to the U.S. manufacturing industry for expanded government procurement of American-made essential items, ranging from uniforms to footwear and body armor and helmets. It is a step in the right direction to further safeguard our national security from unreliable foreign supply chains in China and other countries for essential materials.”

Once signed into law, the new HOPR provisions will go into effect in 180 days.

Source:

National Council of Textile Organizations

adidas introduces its new Terrex Mountaineering Range (c) adidas AG
01.04.2022

adidas introduces its new Terrex Mountaineering Range

  • adidas TERREX athlete Laura Dahlmeier tackles Mont Blanc’s Brouillard Pillar with Thomas and Alexander Huber in the film, United By Summits
  • The trio are kitted out in adidas TERREX’s new Techrock Mountaineering range
  • The adidas TERREX Techrock collection gives climbers the lightweight technical wear required to defy the elements mountainside

Mountaineering is about reaching personal summits. It’s about showing your mettle, finding your freedom and winning in front of no one but yourself and nature.

  • adidas TERREX athlete Laura Dahlmeier tackles Mont Blanc’s Brouillard Pillar with Thomas and Alexander Huber in the film, United By Summits
  • The trio are kitted out in adidas TERREX’s new Techrock Mountaineering range
  • The adidas TERREX Techrock collection gives climbers the lightweight technical wear required to defy the elements mountainside

Mountaineering is about reaching personal summits. It’s about showing your mettle, finding your freedom and winning in front of no one but yourself and nature.

It’s a version of success that adidas TERREX athlete Laura Dahlmeier is reacquainting herself with. A multiple Olympic and world champion, the German biathlete is used to the noise of winning in front of huge crowds. Now retired, Laura is reconnecting with the challenges of a sport that first gave her a taste of freedom as a child: climbing.
Laura sets herself a particularly formidable goal in United By Summits. In the film, she is joined by German climbing brothers Thomas and Alexander Huber for an ascent of Mont Blanc’s infamous Brouillard Pillar and the rarely-attempted Bonington Route made famous by British climber Chris Bonington in 1965.

For this, and any other climb, mountaineers require lightweight but rugged technical wear that ensures easy movement while defying the elements mountainside, allowing for complete focus on the rock and ice in front of them.

Introducing the adidas TERREX Techrock Mountaineering range – worn by Laura and the Huber brothers in United By Summits as they climb one of the Alps’ most demanding routes.

Keeping climbers dry is the adidas TERREX Techrock Light Gore-Tex Mountaineering Jacket, a lightweight, packable jacket with breathable Gore-Tex Active 3-layer membrane to repel water. Adjustable hood and cuffs are compatible with helmets and gloves.

For insulation on colder climbs, the adidas TERREX Techrock Year Round Down Jacket locks in warmth with adidas-patented HeatSeal baffle construction and PrimaLoft® Gold insulation in the shoulders and cuffs. Pertex® Diamond Fuse 20 Denier yarn provides resistance to abrasion along with a water-repellent DWR-finished fabric.

For rugged, weather-resistant legwear that keeps climbers moving freely on any ascent, adidas TERREX Techrock Mountaineering Softshell Pants balance comfort and protection. Flexible, wool-backed softshell fabric moves easily while a tough nylon surface protects against abrasion. A soft waistband helps prevent bunching under harnesses for an easy-moving silhouette – essential on those long climbing days.

Kitted out in this new adidas TERREX Techrock Mountaineering range 4,000 metres above sea level, Laura and the Huber brothers achieved their goals together.

Source:

adidas AG

12.10.2021

DSM to showcase armor solutions made with Dyneema® at Milipol Paris 2021

DSM, the inventor and manufacturer of Dyneema®, will be exhibiting at one of the leading events for homeland security and safety, Milipol Paris 2021, from October 19-22.

The performance characteristics of Dyneema® make it ideal for a variety of applications, including soft and hard armor ballistics to protect against today’s advanced and emerging threats. In addition, Dyneema® combines next-generation fiber technology and unidirectional engineering to deliver armor solutions with unmatched ballistic stopping power in a lightweight and flexible composite.

By implementing Dyneema®, body armor manufacturers are able to use less material in the development of their ballistic vests, plates and helmets. This leads to weight savings upwards of 30 percent when compared to competitive materials, without impacting ballistic performance. The lightweight construction of armor made with Dyneema® also mitigates injuries associated with the cumulative effects of daily armor use – while improving situational awareness, as well as cognitive and tactical performance.

DSM, the inventor and manufacturer of Dyneema®, will be exhibiting at one of the leading events for homeland security and safety, Milipol Paris 2021, from October 19-22.

The performance characteristics of Dyneema® make it ideal for a variety of applications, including soft and hard armor ballistics to protect against today’s advanced and emerging threats. In addition, Dyneema® combines next-generation fiber technology and unidirectional engineering to deliver armor solutions with unmatched ballistic stopping power in a lightweight and flexible composite.

By implementing Dyneema®, body armor manufacturers are able to use less material in the development of their ballistic vests, plates and helmets. This leads to weight savings upwards of 30 percent when compared to competitive materials, without impacting ballistic performance. The lightweight construction of armor made with Dyneema® also mitigates injuries associated with the cumulative effects of daily armor use – while improving situational awareness, as well as cognitive and tactical performance.

While decreasing the load on the wearer, Dyneema® is simultaneously able to reduce the impact of material manufacturing on our planet. In line with DSM’s commitment to protect people and the environment they live in, we have developed the first-ever bio-based ultra-high molecular weight polyethylene fiber and unidirectional (UD) material. Bio-based Dyneema® boasts the same exact performance as conventional Dyneema® with a carbon footprint that is 90 percent lower than generic HMPE.

Source:

DSM Protective Materials / EMG

futureTEX: Systematisches Innovieren in der Textilbranche (c) P3N MARKETING GMBH
Dr. Gottfried Betz erläuterte im Spotlight die Motivation hinter auXCap und beschrieb die zugrundeliegende Technologie und den Inkubationsprozess
07.05.2021

futureTEX: Systematisches Innovieren in der Textilbranche

Seit Projektstart im Jahr 2014 wurden in futureTEX 34 Basis- und Umsetzungsvorhaben bearbeitet – viele davon konnten bereits erfolgreich abgeschlossen werden. Die mehr als 120 Akteure können zahlreiche vielversprechende Forschungsergebnisse in den Bereichen Vernetzung von Maschinensystemen, Digitalisierung von Fertigungsprozessen und automatisierte kundenindividuelle Textilproduktion vorweisen. Nun gilt es, diese Potenziale zu nutzen und die Ergebnisse nachhaltig in die Wirtschaft zu transferieren.

Zur Online-KompetenzWerkstatt "Vom Forschungsvorhaben zur Markteinführung – Systematisch Innovieren im futureTEX-Inkubator" am 29. April 2021 präsentierten nun vier Teams dieser Pilotvorhaben ihren Inkubationsprozess, die Ergebnisse und zogen Bilanz.

Seit Projektstart im Jahr 2014 wurden in futureTEX 34 Basis- und Umsetzungsvorhaben bearbeitet – viele davon konnten bereits erfolgreich abgeschlossen werden. Die mehr als 120 Akteure können zahlreiche vielversprechende Forschungsergebnisse in den Bereichen Vernetzung von Maschinensystemen, Digitalisierung von Fertigungsprozessen und automatisierte kundenindividuelle Textilproduktion vorweisen. Nun gilt es, diese Potenziale zu nutzen und die Ergebnisse nachhaltig in die Wirtschaft zu transferieren.

Zur Online-KompetenzWerkstatt "Vom Forschungsvorhaben zur Markteinführung – Systematisch Innovieren im futureTEX-Inkubator" am 29. April 2021 präsentierten nun vier Teams dieser Pilotvorhaben ihren Inkubationsprozess, die Ergebnisse und zogen Bilanz.

Hinter „auXCap“ steht ein völlig neuer Ansatz textiler Protektoren, der auf dem Prinzip der Auxetik bassiert, bei dem sich Materialien unter Zugbelastung nicht verjüngen, sondern ausdehnen. Das Team um Dr. Gottfried Betz, Geschäftsführer der thüringischen Strickmanufaktur Strick Zella, nutzt dabei auxetische Abstandsgestricke, die nicht nur eine optimale Drapierbarkeit, sondern auch eine erhebliche Stoßdämpfung aufweisen.

2019 war im Rahmen der Kampagne des Bundesministeriums für Verkehr und digitale Infrastruktur vielerorts großflächig „Looks like shit. But saves my life“ zu lesen. Gemeint war der Fahrradhelm, der trotz seiner bewährten Schutzeigenschaft doch von Fahrradfahrern aufgrund der fehlenden Ästhetik verschmäht wurde. Von diesem Umstand motiviert, bestand das Ziel des multidisziplinären auXCap-Teams in der Entwicklung eines neuartigen Kopfprotektors, der Design und Schutz zu einem völlig neuen Produkt verschmelzen lässt.
Gemeinsam strebt das auXCap-Team nun eine Materialentwicklung für Ski- und Snowboard-Helme an.

Des Weiteren wurde mit VOWAco (Prof. Dr. Holger Erth, Textilausrüstung Pfand GmbH & Mareen Götz, Vowalon Beschichtung GmbH Treuen), welches auf dem abgeschlossenen Vorhaben PROFUND aufbaut, eine Plattform als „technisches Herz“ für Funktionalitäten und Aufgabenprofile bei der Entwicklung von individualisierten technischen Produkten in einer textilen Fertigungskette präsentiert. Die Weiterentwicklung zur europaweit ersten Marke für alle Dienstleistungen rund um Forschung, Entwicklung und Fertigung von textilen Komponenten soll mit dem Inkubatorpilot gestartet werden. Das Pilotvorhaben „rCF-Nonwoven-Preforms – Dreidimensionale Preforms aus recycelten Carbonfaser-Vliesstoffen“ (Felix Krug, Tenowo GmbH) verfolgt einen Nachhaltigkeitsansatz und zielt darauf ab, Verschnittabfälle in der Herstellung von Carbonvliesstoffen zu reduzieren. Im Vorhaben „combiH“ (Prof. Dr. Markus Michael, Technitex Sachsen GmbH) sollen neue Applikationen und Märkte für Composites auf Basis hanfbastverstärkter bidirektionaler Gelege identifiziert und validiert werden. Der Inkubatorprozess kombiniert dazu die Methode Design Thinking mit dem Thema Nachhaltigkeit zum „Green Thinking“.

Source:

P3N MARKETING GMBH