From the Sector

Reset
28 results
adidas and Yohji Yamamoto: Second Y-3 Atelier Collection (c) adidas AG
18.03.2024

adidas and Yohji Yamamoto: Second Y-3 Atelier Collection

  • adidas and Yohji Yamamoto return to present their second Y-3 Atelier collection.

For its second collection, Y-3 Atelier introduces a suite of tailored pieces which blend adidas’ performance heritage with Yohji Yamamoto’s design vision. The collection takes original Yohji Yamamoto and Yohji Yamamoto POUR HOMME designs that are from the runway show and recreates them in fully seam sealed waterproof 3-layer GORE-TEX® material constructions, while maintaining the signature silhouette of the original designs. Featuring extended seams and flap pockets, the selection of monochromatic black vests, coats, parkas, blousons, jackets, and blazers comes replete with reflective logos.

Accompanying the launch of the collection is a series of still images captured by photographer Thue Nørgaard which convey the dynamism of each piece.

  • adidas and Yohji Yamamoto return to present their second Y-3 Atelier collection.

For its second collection, Y-3 Atelier introduces a suite of tailored pieces which blend adidas’ performance heritage with Yohji Yamamoto’s design vision. The collection takes original Yohji Yamamoto and Yohji Yamamoto POUR HOMME designs that are from the runway show and recreates them in fully seam sealed waterproof 3-layer GORE-TEX® material constructions, while maintaining the signature silhouette of the original designs. Featuring extended seams and flap pockets, the selection of monochromatic black vests, coats, parkas, blousons, jackets, and blazers comes replete with reflective logos.

Accompanying the launch of the collection is a series of still images captured by photographer Thue Nørgaard which convey the dynamism of each piece.

More information:
adidas Yohji Yamamoto Y-3
Source:

adidas AG

adidas Terrex and National Geographic: Rainforest-Inspired Hiking Collection (c) adidas AG
02.02.2024

adidas Terrex and National Geographic: Rainforest-Inspired Hiking Collection

adidas TERREX and National Geographic collaborate once again to launch a collection that pays homage to the rainforest supporting National Geographic efforts.

Throughout the collection, images captured by National Geographic photographers are interpreted in different ways on different products, taken through different hues and applied in various ways on garments across the range:

adidas TERREX and National Geographic collaborate once again to launch a collection that pays homage to the rainforest supporting National Geographic efforts.

Throughout the collection, images captured by National Geographic photographers are interpreted in different ways on different products, taken through different hues and applied in various ways on garments across the range:

  • ADIDAS TERREX | NATIONAL GEOGRAPHIC RAIN.RDY JACKET – Crafted from waterproofing materials and construction, adidas RAIN.RDY products keep the water out. The jacket also features easily-accessible pockets, a stowaway hood and elongated sleeves with hook-and-loop.
  • ADIDAS TERREX | NATIONAL GEOGRAPHIC WINDSTOPPER JACKET - Made from GORE-TEX WINDSTOPPER, this WIND.RDY jacket is wind-resistant and water-repellent.
  • ADIDAS TERREX | NATIONAL GEOGRAPHIC WINDBREAKER - Using advanced materials, adidas WIND.RDY is designed to resist the wind and provide optimised breathability hikers can feel protected and comfortable.
  • ADIDAS TERREX | NATIONAL GEOGRAPHIC GRAPHIC LONG SLEEVE / SHORT SLEEVE TEE – The long sleeve tee combines technical materials with style beyond the mountain, including Aeroready material that wicks sweat to keep dry and comfortable.
  • ADIDAS TERREX | NATIONAL GEOGRAPHIC PANTS - Marry style and functionality by combining outdoor-informed design and street-informed style together, complemented by Durable Water Repellent (DWR) material to stay dry and comfortable.
  • ADIDAS TERREX | NATIONAL GEOGRAPHIC SKIRT - Made in adidas' wind and water-resistant WIND.RDY fabric, this skirt is for adventures on or off the trail.

The theme of this season’s drop was inspired by National Geographic’s seasonal focus on educating people around rainforest awareness and conservation.

More information:
adidas Outdoor outdoor apparel
Source:

adidas AG

15.12.2023

VIATT 2024 as the response to Vietnam's developing textile sector

Vietnam is the subject of increasing investment across an array of industries, with its textile sector going from strength to strength in a short space of time. To give key players from across the textile spectrum an opportunity to make their presence felt in this market, the Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) will make its debut from 28 February – 1 March 2024. Taking place at the Saigon Exhibition and Convention Center (SECC), the new fair will cover three main product sectors, namely apparel fabrics, yarns and fibres, and garments; home textiles; as well as technical textiles and nonwovens, textile processing, and printing technology.

Vietnam is the subject of increasing investment across an array of industries, with its textile sector going from strength to strength in a short space of time. To give key players from across the textile spectrum an opportunity to make their presence felt in this market, the Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) will make its debut from 28 February – 1 March 2024. Taking place at the Saigon Exhibition and Convention Center (SECC), the new fair will cover three main product sectors, namely apparel fabrics, yarns and fibres, and garments; home textiles; as well as technical textiles and nonwovens, textile processing, and printing technology.

In line with the industry’s anticipation, the country was identified as the ideal location for ASEAN’s new comprehensive textile platform for several key reasons. Vietnam’s pro-business policies, strategic geographical location, abundant labour force, and favourable trade agreements have contributed to its rise as a global textile manufacturing hub. Agreements such as the Regional Comprehensive Economic Partnership (RCEP); the Indo-Pacific Economic Framework for Prosperity (IPEF); and 15 free trade agreements (FTAs) covering over 60 countries and regions, will further enable participants from across the value chain to conduct cross-border business after connecting at next year’s show. In addition, several key travel initiatives that serve international players have been implemented, including the country’s APEC Business Travel Card programme[1], availability of e-visas to all nationalities, and visa-free travel for select countries[2].  

Exhibitors from multiple textile sub-sectors converge in February
In Vietnam’s home textile segment, rising urbanisation, emerging young consumers, and higher disposable incomes are interrelated factors driving growth[3]. Globally, three of the top trends include recycling; utilising green fibres; and the increasing use of technical fabrics for enhanced comfort and health. At the fair, confirmed home textiles exhibitors include Hanyang Eco Tex, Hohmann GmbH, Phuong Nam Feather, and SIGMA, set to showcase their most up-to-date products, covering bedding, upholstery fabrics, curtain, and sun protection.
 
Utilised for automobiles, civil aviation, construction, health care, and more, Vietnam's exports of technical textiles reached USD 676.6 million for the first nine months of 2022, up 17.1% compared to the same period in 2021[4]. This in turn bodes well for the country’s import prospects of quality machinery and equipment. Hoping to cater to domestic demand at VIATT 2024, international suppliers in this category include Julai, SIGMA, and Skwentex.

Meanwhile, apparel-related products make up the lion’s share of the country’s textile exports – according to Vietnam Textile & Apparel Association (VITAS), in 2022 these numbered USD 29.1 billion. From Ho Chi Minh to Hanoi, numerous international fashion brands have a manufacturing presence, including Adidas, H&M, Lacoste, Lululemon, Nike, The North Face, Uniqlo, and many more. At next year’s fair, exhibitors such as Avery Dennison, Lenzing, Stylem Takisada-Osaka, and Texwinca, will aim to draw the attention of apparel brands and a wide range of other domestic and international buyers.

The Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) is organised by Messe Frankfurt (HK) Ltd and the Vietnam Trade Promotion Agency (VIETRADE), covering the entire textile industry value chain.

[1] ‘Everything You Need to Know About Traveling to Vietnam with an APEC Business Travel Card’, April 2023, Vietnam Briefing, https://www.vietnam-briefing.com/news/apec-business-travel-card-vietnam.html/ (Retrieved: November 2023)
[2] ‘Vietnam Introduces E-Visa for All Nationalities from August 15, 2023’, August 2023, Vietnam Briefing, https://www.vietnam-briefing.com/news/vietnam-introduces-e-visa-for-all-nationalities-from-august-15-2023.html/ (Retrieved: November 2023)
[3] ‘Vietnam Home Textile Market Size & Share Analysis’, 2023, Mordor Intelligence, https://shorturl.at/wQVWZ (Retrieved: November 2023)
[4] ‘Vietnam's technical fabric exports continue to be positive’, October 2022, Web Portal of Supporting Industry of Vietnam, https://shorturl.at/lmnvX (Retrieved: November 2023)

Source:

Messe Frankfurt (HK) Ltd

ISKO supports designers at London Fashion Week (c) ISKO
Designs from left to right by: Priya Ahluwalia, Chet Lo, Aaron Esh and Masha Popova
27.09.2023

ISKO supports designers at London Fashion Week

ISKO provided their latest innovation in material science to British designers, Priya Ahluwalia, Masha Popova, Chet Lo and Aaron Esh, for the London Fashion Week SS24 season.

Alongside supplying their latest denim fabrics, ISKO opened its doors to its London-based product development centre, Creative Room London, for finishing and washing of their final designs as well providing expertise and knowledge in denim design and construction.

Priya Ahluwalia
For Ahluwalia’s Spring Summer 24 collection, entitled Acknowledgements, Creative Director and founder Priya Ahluwalia’s research led her on a journey of creative rediscovery.
ISKO’s Ctrl+Z fabric, which is made entirely from recycled and regenerated fibres, was used to create the flower motif denim showcase within 3 looks across jeans and jackets. This development contains no virgin cotton and uses a minimum of 60% recycled materials and the remainder is regenerated cellulose fibres while still giving a look and feel identical to traditional denim and speaks to Ahluwalia’s ongoing commitment to sustainable design and business practices.

ISKO provided their latest innovation in material science to British designers, Priya Ahluwalia, Masha Popova, Chet Lo and Aaron Esh, for the London Fashion Week SS24 season.

Alongside supplying their latest denim fabrics, ISKO opened its doors to its London-based product development centre, Creative Room London, for finishing and washing of their final designs as well providing expertise and knowledge in denim design and construction.

Priya Ahluwalia
For Ahluwalia’s Spring Summer 24 collection, entitled Acknowledgements, Creative Director and founder Priya Ahluwalia’s research led her on a journey of creative rediscovery.
ISKO’s Ctrl+Z fabric, which is made entirely from recycled and regenerated fibres, was used to create the flower motif denim showcase within 3 looks across jeans and jackets. This development contains no virgin cotton and uses a minimum of 60% recycled materials and the remainder is regenerated cellulose fibres while still giving a look and feel identical to traditional denim and speaks to Ahluwalia’s ongoing commitment to sustainable design and business practices.

Chet Lo
This season, Chet Lo took an active stand in reclaiming the power lost during his youth, healing the childhood wounds inflicted by a society that sidelined differences instead of celebrating them.
ISKO’s Ctrl+Z fabric and specialist lasering techniques from ISKO’s Creative Room was used across three looks featuring signature Chet Lo erotic laser prints across denim bottoms.

Aaron Esh
The SS24 season marked the brand’s debut at London Fashion Week, a homecoming of sorts for Esh, who was born and raised in the heart of the British capital, studied at Central Saint Martins and became a finalist at the LVMH Prize earlier this year. The early impulses of Aaron Esh remain steadfast: clothes that combine establishment rigour with the rebellious spirit of youth culture, devotedly crafted for a generation who feels somewhere in-between.
Aaron created bootleg denim ripped jeans made entirely from ISKO Denim using R-TWO50 fabric, which comprises a minimum of 50% pre and post-consumer recycled content. The designer noted the addition of denim accompanied by leathers add a new level of depth to their latest collection.

Masha Popova
Masha Popova’s sophomore catwalk outing, MONSTER was a “seasonless” offering that combines Autumn Winter 2023 and Spring Summer 2024.
Masha continued her obsession with denim manipulation, using various finishings including over-dyeing, flocking, patchwork, scratching and fraying in a variety of colours from vibrant green to silver across jeans, tops and jackets, all developed with the help of ISKO’s Creative Room, London.

Source:

ISKO

30.08.2023

VIATT 2024’s prospects highlighted at Intertextile Apparel press conference

Harnessing the synergy of the Texpertise Network of Messe Frankfurt and its global apparel flagship, the co-organisers of the Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) recently held a joint press conference on 28 August 2023, the first day of Intertextile Shanghai Apparel Fabrics – Autumn Edition. Discussing the inaugural fair’s comprehensive, business-friendly nature, representatives of both Messe Frankfurt  and VIETRADE spoke in glowing terms about the potential of ASEAN’s new platform for the entire textile industry. Set to launch the spring sourcing season, the fair will take place from 28 February – 1 March 2024 at the Saigon Exhibition and Convention Center (SECC), Ho Chi Minh City.

Harnessing the synergy of the Texpertise Network of Messe Frankfurt and its global apparel flagship, the co-organisers of the Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) recently held a joint press conference on 28 August 2023, the first day of Intertextile Shanghai Apparel Fabrics – Autumn Edition. Discussing the inaugural fair’s comprehensive, business-friendly nature, representatives of both Messe Frankfurt  and VIETRADE spoke in glowing terms about the potential of ASEAN’s new platform for the entire textile industry. Set to launch the spring sourcing season, the fair will take place from 28 February – 1 March 2024 at the Saigon Exhibition and Convention Center (SECC), Ho Chi Minh City.

For its first edition, the fair is expected to attract over 500 exhibitors and around 35,000 visitors to an 18,000 sqm exhibition space. Ms Wendy Wen, Managing Director of Messe Frankfurt (HK) Ltd, considered the show’s importance on a worldwide scale: “Serving as a supplementary trade fair to our existing events in China, VIATT will effectively extend our market reach into South East Asia. We’ve designed it to reinforce our global Texpertise Network, spanning the entire textile value chain. The network, which links over half a million textile professionals globally and organises more than 50 international textile trade fairs across 11 different countries, will lend its full support to the fair.”
 
She continued: “In line with this commitment, we will harness our more than 30 years of experience organising Intertextile in China, and extend to the fast-growing textile sector in Vietnam. Intertexile has grown to be by far the most influential series within our Texpertise Network, covering a broad range of resources in apparel fabrics, home and contract textiles."
 
With Vietnam’s largest international airport and seaport, and its proximity to other textile producing countries and regions, Ho Chi Minh City is strategically located to hold an event of this nature. The city attracts 35%[1] of Vietnam’s foreign direct investment projects, and is the venue of choice for a significant portion of the country’s trade fairs.
 
Discussing the event’s potential, Mr Vu Ba Phu, Director General of Vietnam Trade Promotion Agency (VIETRADE), said: “Vietnam has emerged as one of the leading textiles exporting countries worldwide, with particularly high growth in the past 10 years, ranging from 15% to 20% yearly. As companies seek to diversify supply chains, and Vietnam introduces lucrative trade agreements, the market is predicted to attract even more investments. A big importer of textile machinery, fabrics, and yarns and fibres, green production and durable goods have become increasingly important. VIATT 2024 will be an important hub helping suppliers and buyers in all categories to meet, source and unleash the full potential of this market.”
 
A comprehensive Vietnam-based textile fair is an attractive proposition for manufacturers and sourcing professionals alike. Exhibitors from around the world will showcase a full spectrum of apparel fabrics, yarns and fibres, and garments; the latest innovations in technical textiles and nonwovens, textile processing, and printing technology; as well as a wide range of home and contract textiles.
 
Apparel fabrics, yarns and fibres, and garments

This sector will contain quality exhibitors from Vietnam, ASEAN, and beyond, providing buyers with numerous, diverse sourcing options in apparel textile sub-categories such as accessories, casualwear, denim, lace and embroidery, ladieswear, pattern designs, shirting, sportswear, suiting, and many more.
 
Technical textiles and nonwovens, textile processing, and printing technology
With application areas that include everything from automotive, aerospace and shipping, to construction, healthcare and safety, products on display will include innovative machinery, as well as some of the latest developments in smart textiles, such as wearable technology, sensors, and advanced materials.
 
Home textiles
Exhibitors will feature high-quality bed linens, towels, curtains, and much more, suitable for visitors sourcing for both residential and commercial applications. The diverse collections of home textiles will be enhanced by globally on-trend interior designs and in-demand, organic materials.
 
The Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) is organised by Messe Frankfurt (HK) Ltd and the Vietnam Trade Promotion Agency (VIETRADE). Covering the entire textile industry value chain, the inaugural edition will be held from 28 February – 1 March 2024 at the Saigon Exhibition and Convention Center (SECC), Ho Chi Minh City.

[1] ‘Investing in Ho Chi Minh City’, October 2022, Vietnam Briefing, retrieved August 2023, https://www.vietnam-briefing.com/news/investing-in-ho-chi-minh-city-why-the-megacitys-industry-economy-and-policy-are-key-to-developmen.html/

Source:

Messe Frankfurt (HK) Ltd

(c) adidas AG
21.04.2023

adidas TERREX and National Geographic launch hiking collection

adidas TERREX announces a multi-season collaboration with National Geographic, consisting of high-performance outdoor wear. The inaugural collection is built to celebrate the role of photography in the culture of outdoor sport - as well-equipped hikers turn their ability to explore more places, and spirit of adventure, into stunning content.

To celebrate this relationship, designers at adidas TERREX combed the National Geographic photography archives for stunning stills of some of the most remote yet moving locations on earth, integrated in unique all over prints in a bold new hiking collection. All pieces are unified by National Geographic’s iconic yellow icon.

Places celebrated in the collection include a snow-covered sandstone monocline in Comb Ridge, Utah, a 120-mile-long, north to south stretch that defines the State’s red rock landscape, as well as textured portraits of shale, - captured on the coast of Norway’s northernmost county - highlighting the sedimentary rock’s distinctive formations.

adidas TERREX announces a multi-season collaboration with National Geographic, consisting of high-performance outdoor wear. The inaugural collection is built to celebrate the role of photography in the culture of outdoor sport - as well-equipped hikers turn their ability to explore more places, and spirit of adventure, into stunning content.

To celebrate this relationship, designers at adidas TERREX combed the National Geographic photography archives for stunning stills of some of the most remote yet moving locations on earth, integrated in unique all over prints in a bold new hiking collection. All pieces are unified by National Geographic’s iconic yellow icon.

Places celebrated in the collection include a snow-covered sandstone monocline in Comb Ridge, Utah, a 120-mile-long, north to south stretch that defines the State’s red rock landscape, as well as textured portraits of shale, - captured on the coast of Norway’s northernmost county - highlighting the sedimentary rock’s distinctive formations.

The 51-piece collection includes women’s, men’s, and gender-neutral offerings – all built to equip the wearer in multi-terrain environments:

  • A part of the collection is the RAIN.RDY Jacket; a 2.5L waterproof and seam-sealed outer garment built to facilitate epic adventures. The men’s jacket features a bold print of the shell formations in the Porsanger Peninsula, Norway, while the women’s is inspired by stills of White Sands National Park in New Mexico.
  • A long sleeve shirt is finished with the bold National Geographic yellow icon and reflective details.
  • The TERREX Swift R3 GORE-TEX Hiking shoes offer the peak combination of a lightweight construction and cushioning as seen in trail running shoes with the stability of a hiking boot. Finished in a print inspired by a stunning aerial shot of Earth, the hiking shoes come with a GORE-TEX lining and membrane seal so water is kept out, and a Continental™ Rubber outsole for optimal grip in wet or dry conditions.
  • The WIND.RDY: GET SHELTERED Jacket, with wind-resistant technology and a water repellent ripstop fabric, allows explorers to feel protected and confident in many weather conditions. The men’s and women’s versions come with bold prints inspired by photography including that of sandstone and snow at Comb Ridge, Utah. Smart design features including a bungee-cord enabled adjustable hem, a lightweight fabric and reflective details. Additionally, it features a bold new lenticular logo design that alternates between Terrex and National Geographic from different perspectives – and is made in part with recycled materials.
More information:
adidas Outdoor outdoor apparel
Source:

adidas AG

06.04.2023

C&S becomes co-owner of the brand Siviglia

After the recent acquisition of Texo S.R.L. which has strengthened the company's presence in the luxury segment, C&S takes a further step forward in the creation of a widespread garment manufacturing hub in the heart of Italy. C&S takes ownership of the Seville brand together with the Bianchetti family, who remain co-owners covering mainly style research and development functions. The Italian style, which amounts to an aesthetic identity and a guarantee of artisan quality, a cultural orientation toward manufacturing excellence and product design, finally to an approach to the market characterized by availability, openness and interaction with the customer.

This acquisition strengthens C&S direct contact with retail, going alongside HAIKURE, PDF and other brands still being finalized, and will be able to generate a profitable exchange with the Style Services Luxe and Style Services Denim divisions, through which C&S stands out as an exceptional partner for all the brands that choose to rely on its experience in the world of jeans, luxury and formalwear.

After the recent acquisition of Texo S.R.L. which has strengthened the company's presence in the luxury segment, C&S takes a further step forward in the creation of a widespread garment manufacturing hub in the heart of Italy. C&S takes ownership of the Seville brand together with the Bianchetti family, who remain co-owners covering mainly style research and development functions. The Italian style, which amounts to an aesthetic identity and a guarantee of artisan quality, a cultural orientation toward manufacturing excellence and product design, finally to an approach to the market characterized by availability, openness and interaction with the customer.

This acquisition strengthens C&S direct contact with retail, going alongside HAIKURE, PDF and other brands still being finalized, and will be able to generate a profitable exchange with the Style Services Luxe and Style Services Denim divisions, through which C&S stands out as an exceptional partner for all the brands that choose to rely on its experience in the world of jeans, luxury and formalwear.

High quality and Made in Italy trousers, but there is more, the brand Siviglia from the Marche region brings to C&S a wealth of tailoring skills and product construction. Born in Marotta (PU) in 2006 from the Bianchetti family, Siviglia is a reality that has experienced rapid commercial success since its entry into the market thanks to the intuition of the iconic trousers with fabric inserts at mid-thigh inspired by the Spanish horsemen, hence the name that recalls the Andalusian capital.

The success of Siviglia is built on coats, trousers and jeans characterized by fit and linear style, thanks to the continuous research on the product, on the fabrics and on the emerging trends, in a personal reinterpretation of the codes of elegance. The corporate style permeates not only the choice of materials and accessories, but is distinguished by the packaging components and the use of visual and communicative languages in line with the brand identity. By interpreting the contemporary and foreseeing the future needs of a constantly evolving market, Siviglia aims to provide its customers with the best in the broadest sense, including among its qualitative goals the reduction of the environmental impact of productions and materials used.

More information:
C&S Siviglia Bianchetti
Source:

Menabò Group srl

21.02.2023

Polartec®: New technology reduces fiber fragmentation in laundering tests

  • Iconic 200 Series fleece to be the first fabric made from this new process.

Polartec®, a Milliken & Company brand, announces Polartec® Shed Less Fleece, a new milestone in its industry-leading efforts to reduce textile fiber fragment shedding. Shed Less is a process that combines yarn construction, knitting, chemistry, and manufacturing to reduce home laundry fiber fragment shedding by an average of 85%. The first fabric to receive this new technology is the brand’s iconic Polartec® 200 Series Fleece, the modern version of the original PolarFleece® launched in 1981, and in 1993, the first performance fleece knit from yarn made from recycled plastic bottles.

The Shed Less process works by engineering the lofted fibers that give fleece its soft hand the ability to resist breaking and rubbing off during home laundering, cited as one contributing factor to the spread of fibers fragments (commonly referred to as microfibers). Polartec® Shed Less Fleece achieves this while maintaining all of the attributes that continue to make Polartec fleece a staple of midlayer collections - lightweight, breathable and warm.

  • Iconic 200 Series fleece to be the first fabric made from this new process.

Polartec®, a Milliken & Company brand, announces Polartec® Shed Less Fleece, a new milestone in its industry-leading efforts to reduce textile fiber fragment shedding. Shed Less is a process that combines yarn construction, knitting, chemistry, and manufacturing to reduce home laundry fiber fragment shedding by an average of 85%. The first fabric to receive this new technology is the brand’s iconic Polartec® 200 Series Fleece, the modern version of the original PolarFleece® launched in 1981, and in 1993, the first performance fleece knit from yarn made from recycled plastic bottles.

The Shed Less process works by engineering the lofted fibers that give fleece its soft hand the ability to resist breaking and rubbing off during home laundering, cited as one contributing factor to the spread of fibers fragments (commonly referred to as microfibers). Polartec® Shed Less Fleece achieves this while maintaining all of the attributes that continue to make Polartec fleece a staple of midlayer collections - lightweight, breathable and warm.

The brand used the AATCC (American Association of Textile Chemists and Colorists) TM212-2021 test method for fiber fragment release during home laundering. This test was conducted with large sample sizes to account for variability. The testing concluded that Shed Less Fleece reduced fiber fragment shedding by an average of 85% compared to the baseline fabric.

“In 2016 we began looking into how we might test for fiber loss because there wasn’t a lot of research on the issue.” said Aimee LaValley, Polartec Textile Development, Dye and Chemistry Manager. “This led to new products like Polartec Power Air™, new manufacturing processes, as well as our participation in the TextileMission workgroup to study the issue on an interdisciplinary basis.”

TextileMission was a three year collaborative initiative of academia and industry to reduce the impact of textile microplastics funded by the German Federal Ministry of Education and Research. Founding partners include The Association of the German Sporting Goods Industry, Hochschule Niederrhein - University of Applied Science; TU Dresden - Institute of Water Chemistry; Vaude Sport; WWF Germany; Adidas AG; Henkel AG; Miele & CIE; and Polartec, LLC.

Polartec® Shed Less Fleece will be initially launched in the United States and will be available to customers beginning March 1, 2023. The brand plans to apply the Shed Less process to many other industry-leading fabric platforms and manufacturing facilities around the world.

Photo: AWOL
20.09.2022

Halley Stevensons: Unique waxed cotton finishing with new Monforts line

Monforts has installed and commissioned a new Montex finishing range at the Baltic Works of Halley Stevensons in Dundee, Scotland, to further boost the weatherproofing specialist’s highly flexible operations.

The range, with a working width of two metres, was built at the Montex assembly plant in Austria and consists of a Montex®Coat coating unit in knife execution for paste and foam coating and a Montex 8500 6F stenter.

Founded in 1864, Halley Stevensons has amassed unique technical know-how and manufacturing experience in the art of waxed cotton for weatherproofed fabrics and is able to provide international orders in custom colours and finishes to very low minimum quantities where required. The company exports worldwide and its premium brand customers include Belstaff, Barbours, Filson and J.Crew.

The range has replaced one of the company’s older stenter/coating lines and has already enabled Halley Stevensons to recreate various products with lower coating applications at higher speeds than was previously possible.

Monforts has installed and commissioned a new Montex finishing range at the Baltic Works of Halley Stevensons in Dundee, Scotland, to further boost the weatherproofing specialist’s highly flexible operations.

The range, with a working width of two metres, was built at the Montex assembly plant in Austria and consists of a Montex®Coat coating unit in knife execution for paste and foam coating and a Montex 8500 6F stenter.

Founded in 1864, Halley Stevensons has amassed unique technical know-how and manufacturing experience in the art of waxed cotton for weatherproofed fabrics and is able to provide international orders in custom colours and finishes to very low minimum quantities where required. The company exports worldwide and its premium brand customers include Belstaff, Barbours, Filson and J.Crew.

The range has replaced one of the company’s older stenter/coating lines and has already enabled Halley Stevensons to recreate various products with lower coating applications at higher speeds than was previously possible.

Waxed cotton was originally developed by sailors in the early 15th century when Scottish North Sea herring fleets began treating flax sailcloth with fish oils and grease in an attempt to waterproof their sails. Remnants of these sails were used by the sailors as capes to withstand the high winds and sea spray.

By the mid 1850s, sailcloth was being treated with linseed oil, but while initially highly effective, it would yellow and stiffen through weathering over time and eventually lose its waterproofing qualities.

In the years that followed, various treatments were applied to cottons in an attempt to find the most effective weatherproofing solution, and the combination of densely-woven cotton impregnated with a paraffin waxed coating proved most successful. For over 150 years, Halley Stevensons created many different variations of both woven constructions and finishing treatments and now supplies thousands of metres of waxed cotton every year, with each roll produced to custom specifications.

“The beauty of waxed cotton is its durability and longevity,” says Managing Director James Campbell. “The fabrics are breathable, with the wax adjusting to ambient temperatures to be softer and more breathable in warm weather and stiffer and more wind proof in cold conditions.”
While traditional waxes are petroleum or paraffin based, Halley Stevensons has always been comfortable about using a waste product from industry and reusing it to make products that last a lifetime.  

“We are always exploring different finishing techniques and one of our most popular finishes is our hybrid aero – an emulsified blend of waxes,” Campbell says. “This fabric is water repellent but has little wax in the mixture so the handle is much drier to touch than the traditional wet waxes.”

The company has also recently launched a new 100% plant-based wax – Ever Wax Olive – consisting of a blend of olive oil, rape seed and castor bean with comparable water repellence to petroleum and a far better rating than other natural waxes which have come before it.

“The high tradition of skills and fabric innovation imposed by our original guildsmen is still our benchmark standard of honest workmanship today,” Managing Director James Campbell concludes “We use responsibly sourced cotton fabrics and processes that are gentle to the product and low impact to the environment. Our dyeing methods use very low levels of water and our waxes are simply heated up for application and cooled down to store when not in use, meaning no waste discharges. Now, with this new Monforts line, we are also achieving running speeds two-to-three times faster than with the older stenter, combined with less gas usage. It’s proved a great partnership.”

Photo: Ardazaei AB
08.07.2022

ArdAzAei: Couture collection ‘Midnight in the Persian Garden’

The new Swedish luxury womenswear brand presented its first couture runway show, ‘Midnight in the Persian Garden’, in the Salle des Textiles of Paris’ Musée des Arts et Métiers on Thursday, July 7th at 10.30am CET.

The new Swedish luxury womenswear brand presented its first couture runway show, ‘Midnight in the Persian Garden’, in the Salle des Textiles of Paris’ Musée des Arts et Métiers on Thursday, July 7th at 10.30am CET.

As earthly manifestations of an imaginary paradise, where architecture and horticulture were brought together into meticulous perfection, the Persian garden was the point of inspiration for ArdAzAei’s debut couture collection.
A poetic ode to the transcendent beauty of nature, ‘Midnight in the Persian Garden’ honours the incredibly complex systems of engineering required to create such sublime spaces through couture’s intricate techniques of smocking, pleating, embroidery, and appliqué.
 
An evening wear collection of red-carpet gowns and cocktail dresses, tailoring, jewellery and accessories, the collection sees a recurring reference to the Persian Rose and the Parrot Tulip, with the flowers informing silhouettes, three-dimensional sculptural forms, and elaborately embroidered jacquard.
 
Sharp tailoring in the form of contemporary women’s suits see sleek jackets and flared pants with hypnotic floral patterning evoking the undulating chaos of nature’s rhythms.
 
Another key theme running throughout the collection is the dynamic between mathematic forms of composition—a key element of Persian garden architecture—and the craft of the handmade, evident in crystal sequins custom-cut to the lines of the ArdAzAei logo, designed by M/M (Paris), which are then hand-embroidered to create organic forms.
 
The dynamic is also evident in an evening dress which sees 60 metres of fabric pleated and cut into geometric shapes appliqued to its top, while 100 hand-painted pleated fans go into the construction of its flared skirt.

In order to realise such intricate forms of construction, the collection is made in France in collaboration with highly skilled couture artisans focused on upholding the highest craftsmanship and material standards. The show venue, the ‘Salle des Textiles’ at the Musée des Arts et Métiers, pays homage to the country’s rare artisanal expertise.

“I have been searching for the long-lasting beauty and respect for nature that you’ll find in the Persian garden, some of which date back to as early as 4,000 BC,” says Bahareh Ardakani, ArdAzAei’s founder and creative director.
 
“This is reflected in our endeavours to certify part of our collection to the Global Organic Textile Standard (GOTS), and why this collection is made in France with the country’s leading couture artisans. Every detail is precious, and we want to express the feeling of walking through a Persian garden in the midnight to the smallest of details.”
 
With ateliers in Paris and Stockholm, ArdAzAei is where Persian heritage, Swedish modernism and French savoir-faire collide.

As a luxury womenswear brand engaged in the search for the sublime, ArdAzAei eschews trend-based consumption to instead offer made-to-measure couture, and one prêt-à-porter collection of formalwear per year, released in drops according to the seasons on the digital flagship ArdAzAei.com
 
ArdAzAei focuses on working with textile suppliers that can reveal the details of the origins and processes behind its products, tracing each fabric right through the supply chain of raw materials, yarn spinners, weavers, print and dying techniques.

(c) adidas AG
07.07.2022

adidas Originals presents: “Always Original” Fall/Winter 2022 Drop One

This season, adidas Originals returns with the next installment of its “Always Original” initiative. First assembled in 2021 to pay homage to the multifaceted identities of women and non-binary folks, the “Always Original Collective” takes centre stage again, as the brand with the Three Stripes turns its focus to representing allyship in originality with a new collection and campaign made to fit every story.

The drop one offering has been designed for everyone – no matter their size, shape, gender, or style. Celebrating all forms of originality each piece is available in an extended size run and boasts lace constructions that are as versatile as the moves of those the collection was designed for. Created to allow everyone to express their individuality, the garments on offer reimagine adidas’ sporting history for a new generation of changemakers while the footwear selection features updated takes on the Forum Low and the Astir W silhouettes.

This season, adidas Originals returns with the next installment of its “Always Original” initiative. First assembled in 2021 to pay homage to the multifaceted identities of women and non-binary folks, the “Always Original Collective” takes centre stage again, as the brand with the Three Stripes turns its focus to representing allyship in originality with a new collection and campaign made to fit every story.

The drop one offering has been designed for everyone – no matter their size, shape, gender, or style. Celebrating all forms of originality each piece is available in an extended size run and boasts lace constructions that are as versatile as the moves of those the collection was designed for. Created to allow everyone to express their individuality, the garments on offer reimagine adidas’ sporting history for a new generation of changemakers while the footwear selection features updated takes on the Forum Low and the Astir W silhouettes.

Launching alongside the main Fall/Winter 2022 drop one selection is an expressive capsule collection co-created directly with the “Always Original Collective”. Inspired by each member’s interpretation of two key words – Belonging and Community – the capsule offers a host of bold and dynamic graphic pieces.

The first seasonal drop is accompanied by the arrival of an undeniably optimistic campaign centering on four members of the collective – Jari Jones, Amani, Naomi Otsu, and Lena Waithe – and inspired by the slogan: “They’ve been here for us. Now it’s our turn.”

The campaign visuals spotlight the shops and small businesses that helped to shape the lives of each dynamic changemaker: Yu & Me Book Store, Le’Jemalik Beauty Salon, Hibiscus Brew Coffee Shop, and Savant Studios. Putting the focus on those who have been there all along, the campaign seeks to demonstrate the power of allyship in communities around the world.

More information:
adidas adidas Originals clothing
Source:

adidas AG

Photo: Stora Enso
20.06.2022

Infinited Fiber Company: Commercial-scale factory to produce regenerated textile fiber

  • Finnish fashion and textile technology company Infinited Fiber Company plans to build its first commercial-scale Infinna™ fiber factory at Stora Enso’s Veitsiluoto industrial site in the city of Kemi in Finland’s northernmost region of Lapland. Infinited Fiber Company plans to convert a building currently housing a discontinued paper production line.
  • The size of Infinited Fiber Company’s planned investment is around EUR 400 million.
  • The planned factory is expected to create around 270 jobs at the Veitsiluoto industrial site.
  • The factory is expected to operate at full capacity in 2025.

Fashion and textile technology company Infinited Fiber Company plans to build a commercial-scale factory to produce regenerated textile fiber for the world’s leading apparel companies at the site of renewable materials company Stora Enso’s closed Veitsiluoto paper mill in Kemi, a Finnish city on the northern shore of the Baltic Sea. The size of the investment is estimated at EUR 400 million, and it is expected to create around 270 jobs in the area.

  • Finnish fashion and textile technology company Infinited Fiber Company plans to build its first commercial-scale Infinna™ fiber factory at Stora Enso’s Veitsiluoto industrial site in the city of Kemi in Finland’s northernmost region of Lapland. Infinited Fiber Company plans to convert a building currently housing a discontinued paper production line.
  • The size of Infinited Fiber Company’s planned investment is around EUR 400 million.
  • The planned factory is expected to create around 270 jobs at the Veitsiluoto industrial site.
  • The factory is expected to operate at full capacity in 2025.

Fashion and textile technology company Infinited Fiber Company plans to build a commercial-scale factory to produce regenerated textile fiber for the world’s leading apparel companies at the site of renewable materials company Stora Enso’s closed Veitsiluoto paper mill in Kemi, a Finnish city on the northern shore of the Baltic Sea. The size of the investment is estimated at EUR 400 million, and it is expected to create around 270 jobs in the area. The annual fiber production capacity of the planned factory is expected to be 30,000 metric tons, which is equivalent to the fiber needed for about 100 million T-shirts.  

Infinited Fiber Company’s technology enables cotton-rich textile waste to be transformed into a versatile, high-quality regenerated textile fiber called Infinna™, which looks and feels like cotton. Major international fashion and apparel companies – including Zara’s parent company Inditex, PVH Europe, which is known for the Tommy Hilfiger brand, Patagonia, PANGAIA, H&M Group and BESTSELLER – have already committed to Infinna™ purchases through multi-year agreements as they look for materials that enable the industry to shift towards circularity. Infinited Fiber Company expects to export most of the output of its planned factory. This makes Kemi an ideal location as the city’s port serves as an efficient link to the rest of the world.

Infinited Fiber Company will convert a building housing a discontinued paper production line into an Infinna™ fiber factory. Both the factory engineering and project implementation as well as the related financing negotiations were commenced at the beginning of the year and are progressing well. Infinited Fiber Company has also agreed on the provision of energy and water related services with utility infrastructure company Nevel.

Once up and running, the factory is expected to provide direct employment for around 220 people, and for a further 50 through on-site support functions such as services, maintenance, and logistics. The additional indirect employment impact is estimated to be around 800 jobs. The construction and installation phase is expected to create jobs equaling around 120 person-years. The factory is anticipated to operate at full capacity in 2025.

Source:

Infinited Fiber Company

22.04.2022

Cone Denim launches U.S. Grown Hemp denim collection with BastCore

Cone Denim®, a leader in denim authenticity and sustainable innovation, launches a new U.S. grown hemp denim collection in collaboration with expert hemp processing innovator, BastCore. Cone is excited to expand its sustainable denim offerings and increase its support of the American agriculture industry, featuring denim made with Alabama hemp and U.S. cotton and dyed with natural indigo grown in Tennessee.

Cone Denim is honored to partner with BastCore, a team that aligns with Cone’s values and its commitment to innovation, quality, sustainability, and traceability. The pioneers at BastCore have created patent-pending technology and a proprietary process that produces clean, mechanically processed, OEKO-TEX® STANDARD 100 certified and USDA bio-preferred hemp fiber out of its operation in Montgomery, Alabama.

Cone Denim®, a leader in denim authenticity and sustainable innovation, launches a new U.S. grown hemp denim collection in collaboration with expert hemp processing innovator, BastCore. Cone is excited to expand its sustainable denim offerings and increase its support of the American agriculture industry, featuring denim made with Alabama hemp and U.S. cotton and dyed with natural indigo grown in Tennessee.

Cone Denim is honored to partner with BastCore, a team that aligns with Cone’s values and its commitment to innovation, quality, sustainability, and traceability. The pioneers at BastCore have created patent-pending technology and a proprietary process that produces clean, mechanically processed, OEKO-TEX® STANDARD 100 certified and USDA bio-preferred hemp fiber out of its operation in Montgomery, Alabama.

Cone’s U.S. Hemp Collection includes a range of fabrics featuring classic 3×1 and comfort stretch to modern workwear constructions. The collection further expands upon Cone’s sustainability and traceability practices, driving the future of the industry. The proximity of the hemp, indigo, and cotton crops in the U.S. to the company’s mills in Mexico is also key in creating the smallest environmental impact and footprint possible.

Hemp offers many key benefits in creating the next level of sustainable denim:

  • More than 50% water savings occur, compared to cotton
  • No chemicals, wet processing, pesticides, or herbicides are used
  • Hemp grows in a variety of soils with excellent biodegradability, is antimicrobial, has high tensile strength, moisture regain content, and tenacity
  • Hemp and natural indigo crops have high rates of carbon sequestration, which ultimately benefits the environment and improves the soil’s health for other crops (climate positive)
Source:

Cone Denim

adidas introduces its new Terrex Mountaineering Range (c) adidas AG
01.04.2022

adidas introduces its new Terrex Mountaineering Range

  • adidas TERREX athlete Laura Dahlmeier tackles Mont Blanc’s Brouillard Pillar with Thomas and Alexander Huber in the film, United By Summits
  • The trio are kitted out in adidas TERREX’s new Techrock Mountaineering range
  • The adidas TERREX Techrock collection gives climbers the lightweight technical wear required to defy the elements mountainside

Mountaineering is about reaching personal summits. It’s about showing your mettle, finding your freedom and winning in front of no one but yourself and nature.

  • adidas TERREX athlete Laura Dahlmeier tackles Mont Blanc’s Brouillard Pillar with Thomas and Alexander Huber in the film, United By Summits
  • The trio are kitted out in adidas TERREX’s new Techrock Mountaineering range
  • The adidas TERREX Techrock collection gives climbers the lightweight technical wear required to defy the elements mountainside

Mountaineering is about reaching personal summits. It’s about showing your mettle, finding your freedom and winning in front of no one but yourself and nature.

It’s a version of success that adidas TERREX athlete Laura Dahlmeier is reacquainting herself with. A multiple Olympic and world champion, the German biathlete is used to the noise of winning in front of huge crowds. Now retired, Laura is reconnecting with the challenges of a sport that first gave her a taste of freedom as a child: climbing.
Laura sets herself a particularly formidable goal in United By Summits. In the film, she is joined by German climbing brothers Thomas and Alexander Huber for an ascent of Mont Blanc’s infamous Brouillard Pillar and the rarely-attempted Bonington Route made famous by British climber Chris Bonington in 1965.

For this, and any other climb, mountaineers require lightweight but rugged technical wear that ensures easy movement while defying the elements mountainside, allowing for complete focus on the rock and ice in front of them.

Introducing the adidas TERREX Techrock Mountaineering range – worn by Laura and the Huber brothers in United By Summits as they climb one of the Alps’ most demanding routes.

Keeping climbers dry is the adidas TERREX Techrock Light Gore-Tex Mountaineering Jacket, a lightweight, packable jacket with breathable Gore-Tex Active 3-layer membrane to repel water. Adjustable hood and cuffs are compatible with helmets and gloves.

For insulation on colder climbs, the adidas TERREX Techrock Year Round Down Jacket locks in warmth with adidas-patented HeatSeal baffle construction and PrimaLoft® Gold insulation in the shoulders and cuffs. Pertex® Diamond Fuse 20 Denier yarn provides resistance to abrasion along with a water-repellent DWR-finished fabric.

For rugged, weather-resistant legwear that keeps climbers moving freely on any ascent, adidas TERREX Techrock Mountaineering Softshell Pants balance comfort and protection. Flexible, wool-backed softshell fabric moves easily while a tough nylon surface protects against abrasion. A soft waistband helps prevent bunching under harnesses for an easy-moving silhouette – essential on those long climbing days.

Kitted out in this new adidas TERREX Techrock Mountaineering range 4,000 metres above sea level, Laura and the Huber brothers achieved their goals together.

Source:

adidas AG

KARL MAYER: New perspectives through precise lace symmetry (c) KARL MAYER
Examples of Symm-Net designs
08.03.2022

KARL MAYER: New perspectives through precise lace symmetry

  • Symm-Net articles made using the new MJ 92/1 B impress with their perfectly symmetrical appearance

Lace is a delicate seducer. The more finely crafted its ground structure, the more effective its refined designs come across, and as such, the higher the overall quality. The innovative Symm-Net pieces, which can be produced on KARL MAYER’s new MJ 92/1 B, have a look that sets new standards.

  • Symm-Net articles made using the new MJ 92/1 B impress with their perfectly symmetrical appearance

Lace is a delicate seducer. The more finely crafted its ground structure, the more effective its refined designs come across, and as such, the higher the overall quality. The innovative Symm-Net pieces, which can be produced on KARL MAYER’s new MJ 92/1 B, have a look that sets new standards.

Lace offering maximum clarity and balance
Symm-Net lace is characterised by an extremely delicate design, offering absolute symmetry. This is thanks to the particular configuration of the MJ 92/1 B – the new multi-bar jacquard raschel machine features a split-design jacquard bar with separate threading, and can thus work using both equal and counter lapping. In addition, the newcomer has two ground guide bars at the back for counterlapped elastane. For Symm-Net’s ground structure, GB1 works a pillar notation whilst the jacquard bar works a counter-lapped inlay. The result is a net structure with absolutely symmetrical, clearly defined symmetry. To perfect the geometry, the two elastane bars with split threading – i.e. 1 in, 1 out – and counter-lapping patterning mirror the movement of the jacquard bar.

The lapping patterns thus look as follows:
• JB 91: 0 – 0 / 2 – 2 // and JB 92: 2 – 2 / 0 – 0 //
• GB 93: 0 – 0 / 1 – 1 // and GB 94: 1 – 1 / 0 – 0 //

The ground structure is not only more uniform, but also more stable than its counterparts manufactured with equal lapping. The advantages of Symm-Net are particularly visible when working finer mesh constructions. “When it comes to a delicate appearance, Leavers lace traditionally sets the standard; in particular, Endsor- Net is known for its delicate design. There is hardly any discernible difference with Symm-Net, which should open up new design perspectives, especially for the premium brands in Europe,” explains Jamie Heather, lace expert at KARL MAYER. Symm-Net offers a further advantage thanks to its simple pattern development. For example, the patterning process does not require any updates to the commonly used patterning software, SAPO and ProCad – only the machine database needs to be adapted.

High design flexibility
In addition to the Symm-Net variants, all existing patterns of the OJ 91/1 B, MJ 85/1 B and OJ 83/1 B can be implemented on the MJ 92/1 B in E 24 without restrictions; switching from the new counter lapping to the traditional JACQUARDTRONIC® LACE pattern is seamless. Jamie Heather is certain this flexibility will give customers a real competitive advantage.

All the prerequisites for a bestseller
The MJ 92/1 B has been successfully offered on the market since May 2021. The newcomer is available in gauge E 24, with a working width of 134". Despite its high design flexibility, it still offers first-class productivity. It can also reach speeds of up to 800 rpm when producing Symm-Net articles. To allow for diverse product design, 88 pattern guide bars and two elastane bars, arranged in 16 shogging lines, are available. Thanks to these features, the MJ 92/1 B mainly produces elastic galloon lace, but also all-over lace for stylish lingerie items.

Source:

KARL MAYER Verwaltungsgesellschaft mbH

(c) Flocus ™
22.02.2022

Flocus ™ kapok nonwovens and fabrics for the leather goods and footwear

Flocus ™, the trademark for kapok fibers, offers a range of kapok textile materials such as fibers, yarns, textiles and nonwovens. The company presents the most performing and zero carbon footprint solutions based on Flocus™ kapok available for the leather goods industry, a sector that is making an important transition to sustainability in terms of processing and raw materials.

As for nonwoven, some of their most used products in the world of leatherware are:

Flocus ™, the trademark for kapok fibers, offers a range of kapok textile materials such as fibers, yarns, textiles and nonwovens. The company presents the most performing and zero carbon footprint solutions based on Flocus™ kapok available for the leather goods industry, a sector that is making an important transition to sustainability in terms of processing and raw materials.

As for nonwoven, some of their most used products in the world of leatherware are:

  • Maliwatt - 50% Kapok, 50% PLA (based on corn), a 100% biodegradable non-woven which can be used in the shoe sole. Maliwatt can be thermopressed/heat press and turned into a paper/cardboard type and lightweight structure. It is the perfect material for sneakers, casual and active shoes thanks to its quick dry, antibacterial, hydrophobic, hypoallergenic, Insulation properties. Other frequent applications are in the field of automotive, construction and car panels, sound absorption and acoustics panels and geo textiles.
  • HDE /Hydroentanglement - 50% Kapok, 50% Organic cotton. It is a 100% natural and biodegradable material that can be used in the shoe production as a sole, intersole or as a padding for shoes and bags. Thanks to its termoregulating, lightweight, hypoallergenic, thermoconductivity, insulation, soft touch, hydrophobic, anti-moth anti mite properties, it is used for a large range of applications. It is popular in the apparel world as a cruelty free filling for winter jackets, replacing duck down, and in the home industry ad a stuffing for mattresses, duvets, furniture, sleeping bags.

The offer for the leather goods industry includes also Flocus™ kapok-based fabrics in different blends and weights: linings, coatings, fabric inserts, accessories, components rich in performance and style. For example, kapok and organic cotton with GOTS certification, kapok with Tencel and recycled polyester (Repreve), kapok with linen, organic cotton and a small percentage of Spandex.

These materials were presented at the September 2021 edition of Lineapelle in the exhibition "A New point of materials", dedicated to eco-responsible innovations in terms of technologies, applications, materials and machines.

Source:

Flocus

(c) Freudenberg. From left: Pietro Traini, Civil Engineer, Dr. Bruno Brandozzi, Manager HSE and Compliance, and Dr. Christian Cavaletti, Operations Manager Sant ́Omero site.
13.12.2021

Freudenberg: Construction of the competence center for apparel interlinings started

Freudenberg Performance Materials Apparel Europe started construction work on its competence center for finishing and coating base material for the apparel industry at its site in Sant´Omero (Italy) as scheduled in December. Further processing of base material is to begin in Italy in early 2023. The Weinheim site will then become the competence center for interlining base material.

In January 2021, Freudenberg Performance Materials Apparel Europe (Freudenberg) announced plans to set up two competence centers. In future, the company will concentrate on manufacturing base material for interlinings at the Weinheim location. Base material finishing and coating is to be bundled at Sant´Omero. For this purpose, production plant will be relocated from Weinheim to Sant´Omero and recommissioned in a newly-built production hall.

The traditional groundbreaking ceremony with senior representatives from local authorities and Freudenberg management was cancelled due to the high number of coronavirus cases in the area.

Freudenberg Performance Materials Apparel Europe started construction work on its competence center for finishing and coating base material for the apparel industry at its site in Sant´Omero (Italy) as scheduled in December. Further processing of base material is to begin in Italy in early 2023. The Weinheim site will then become the competence center for interlining base material.

In January 2021, Freudenberg Performance Materials Apparel Europe (Freudenberg) announced plans to set up two competence centers. In future, the company will concentrate on manufacturing base material for interlinings at the Weinheim location. Base material finishing and coating is to be bundled at Sant´Omero. For this purpose, production plant will be relocated from Weinheim to Sant´Omero and recommissioned in a newly-built production hall.

The traditional groundbreaking ceremony with senior representatives from local authorities and Freudenberg management was cancelled due to the high number of coronavirus cases in the area.

Source:

Freudenberg Performance Materials

ISKO™ creates a fully sustainable Fabric Collection (c) ISKO
13.12.2021

ISKO™ creates a fully sustainable Fabric Collection

ISKO’s 2023 Collection Vol. 1 is designed to meet the varied needs of today’s consumer by providing fashion, comfort, versatility and responsibility in each of its innovative fabrics. The entire collection is “engineered for nature” using ISKO’s recently launched R-TWO™50+ technology – a process which creates high-quality denim that is less harmful to the natural world.

R-TWO™50+ is the driving force behind ISKO’s efforts to reduce the industry’s impact on the planet. The fabrics are made with a minimum of 50% pre- and post-consumer recycled blend that is entirely Global Recycled Standard (GRS) certified. This results in less use of natural resources and a reduced carbon and water footprint of up to 45% and 65% respectively.

ISKO has also incorporated hemp into the collection as a sustainably viable alternative to cotton. Hemp requires much less water, no pesticides and grows quickly in almost any type of soil. New spinning techniques give the fiber a softer hand feel and make hemp a genuinely enticing option to cotton.

ISKO’s 2023 Collection Vol. 1 is designed to meet the varied needs of today’s consumer by providing fashion, comfort, versatility and responsibility in each of its innovative fabrics. The entire collection is “engineered for nature” using ISKO’s recently launched R-TWO™50+ technology – a process which creates high-quality denim that is less harmful to the natural world.

R-TWO™50+ is the driving force behind ISKO’s efforts to reduce the industry’s impact on the planet. The fabrics are made with a minimum of 50% pre- and post-consumer recycled blend that is entirely Global Recycled Standard (GRS) certified. This results in less use of natural resources and a reduced carbon and water footprint of up to 45% and 65% respectively.

ISKO has also incorporated hemp into the collection as a sustainably viable alternative to cotton. Hemp requires much less water, no pesticides and grows quickly in almost any type of soil. New spinning techniques give the fiber a softer hand feel and make hemp a genuinely enticing option to cotton.

2023 Collection Vol. 1 includes ISKO Blue Skin™, Jeggings™, ISKO™ Rigid, ISKO Rigidflex™, ISKO EFD™, Summer Colors, Catwalk, ISKO Reform™, ISKO™ Black, ISKO™ Comfort, ISKO Pop™ – and five macro trends (Denim Nation, New Origin, Isko Reborn, Isko Motion, Chill Zone). These trends incorporate some of ISKO’s key denim technologies to create a versatile collection that complements any style, vibe and mood.

ISKO Reform™, ISKO Blue Skin™ and Jeggings™ are the groups used to create fabrics that are trans-seasonal and one-size-fits-all – subscribing to a philosophy of inclusivity that is valued by Gen Z.

The collection also gives prominence to color groups. ISKO™ Black delivers various shades of black with different elasticity and aspect options. This part of the collection fulfils the perennial need for this timeless color. ISKO EFD™, or ‘Eco For Dye’, is a sustainable approach to producing ecru fabric. This technology shortens the production process and saves on water usage. The result is an ecru-colored base that can be used as is for a natural look or can also be dyed to any color.

New this season are the Summer Colors and Catwalk groups. Summer Colors is inspired by an eclectic mix of influences including natural earth tones, workwear looks or bright colors with authentic, open-end denim constructions. Catwalk is a bold and bright addition to the collection that offers on-trend styles in ISKO finishes including ISKO Urban Jeather™, Pearl Coat and Flashy Finish.

Source:

ISKO / Menabò Group

16.11.2021

RGE: Second Annual Update on Textile Fibre Innovation and Technology

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Amid the COVID-19 pandemic continuing to restrict travel and collaboration, RGE persisted in building upon existing partnerships, while entering into new agreements. Sateri strengthened its strategic collaboration with Infinited Fiber Company, participating in the company’s EUR30 million funding round, which attracted new and existing investors such as H&M Group, Adidas, BESTSELLER and Zalando.

New partnerships formed by RGE included a five-year textile recycling research collaboration with Nanyang Technological University Singapore, and a three-year strategic partnership with the Textile and Fashion Federation Singapore which seeks, among others goals, to advance research and innovation in circular economy approaches to fashion waste in Asia.

RGE’s in-house R&D team has made good progress in advancing its textile-to-textile project, focusing on producing quality viscose using recycled cotton textiles as feedstock. To support plans to build a textile recycling facility in Indonesia, and as part of commercial feasibility analysis, studies examining the availability of textile waste and textile recycling landscapes in China, Indonesia, Sri Lanka and Bangladesh were completed.

Sateri remains on track in developing a product with 50 per cent recycled content by 2023, and to reach 100 per cent by 2030. It also aims for 20 per cent of its feedstock to contain alternative or recycled materials by 2025. In this similar vein, APR will source 20 per cent of its feedstock from alternative or recycled materials by 2030.

Source:

RGE / Omnicom Public Relations Group

(c) RadiciGroup
25.10.2021

RadiciGroup: Sustainable Personal Protective Equipment at A+A

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

At RadiciGroup, care for the health and safety of people is one of the pillars of the Group's sustainability strategy, combined with a strong commitment to safeguarding the environment. Radipeople Eco, the first protective coverall with 100% end-of-life recyclability is proof of such commitment. All parts of Radipeople Eco: the fabric, lamination, zipper and thread are made of the same material, 100% polypropylene. Furthermore, the Group’s offering includes garments made with Respunsible®, a spundbond obtained from recycled polypropylene or materials certified under the ISCC Plus scheme.

Thanks to their versatility and technical characteristics, the nonwoven solutions proposed by RadiciGroup are suitable for many industrial sectors, including oil and gas, utilities, construction, food, automotive painting and shipbuilding, maintenance, agriculture, laboratories, microprocessor manufacturing and the pharmaceutical and chemical industries.

Radipeople personal protective equipment delivers excellent protection against external agents (liquids, splashes, jets, particles and sprays), high protection against biological hazards and infectious agents, and high robustness and lightness to optimize protection, on the one hand, and comfort, on the other. All Radipeople protective equipment is made of fully traceable materials, manufactured by a totally Italian production chain involving hundreds of workers, and sold in packaging designed with an ecodesign approach, that is, fully recyclable minimized packaging.

Source:

RadiciGroup