From the Sector

Reset
375 results
(c) nova-Institut GmbH
25.02.2022

Winner of the Cellulose Fibre Innovation of the Year

The annual highlight of the industry is the International Conference on Cellulose Fibres in Cologne, where the latest innovations were showcased: new cellulose fibre technologies for various feedstocks and a wide range of hygiene and textile products as well as alternatives to plastics and carbon fibre for lightweight constructions.

This year, for the first time, there were 230 participants from 27 countries. About 60 were able to attend on site – with strict Corona safety measures – while the others were able to attend online and participate in questions and discussions.

The conference gave deep insights into the promising future of cellulose fibres, which fit perfectly into the current trends of circular economy, recycling and sustainable carbon cycles.

The annual highlight of the industry is the International Conference on Cellulose Fibres in Cologne, where the latest innovations were showcased: new cellulose fibre technologies for various feedstocks and a wide range of hygiene and textile products as well as alternatives to plastics and carbon fibre for lightweight constructions.

This year, for the first time, there were 230 participants from 27 countries. About 60 were able to attend on site – with strict Corona safety measures – while the others were able to attend online and participate in questions and discussions.

The conference gave deep insights into the promising future of cellulose fibres, which fit perfectly into the current trends of circular economy, recycling and sustainable carbon cycles.

An important focus at the conference was alternative sources of cellulose. The increasing demand for cellulose fibres cannot be met in the long run with wood and used textiles alone. At the conference, a variety of agricultural by-products and biogenic waste were presented in presentations and panel discussions, such as orange and banana peels, grain and hemp straw. Much of this is high-volume and has not been put to high-value use so far. Exciting opportunities for the future cellulose fibre industry.

Innovation Award
Live at the conference, host nova-Institute and award sponsor GIG Karasek GmbH granted the “Cellulose Fibre Innovation of the Year” award to one of six highly interesting products.

  • First Winner: Carbon Fibres from Wood – German Institutes of Textile and Fiber Research Denkendorf (Germany)
  • Second Winner: Fibers365, Truly Carbon-Negative Virgin Fibres from Straw - Fibers365 (Germany)
  • Third Winner: Sustainable Menstruation Panties: Application-driven Fibre Functionalisation – Kelheim Fibres (Germany)
21.02.2022

JEC COMPOSITES STARTUP BOOSTER 2022

  • A springboard for entrepreneurs in the composites industry

In a few years, JEC Composites Startup Booster has became a reference for entrepreneurship in the composites industry worldwide. Each year before JEC World, among the startups that submitted their application, 20 of them are selected. 20 finalists from all over the world who will join the leading composites trade show to pitch their project on stage before a panel of expert judges.

This competition is a unique opportunity to network and shine a light on what will be the future of the composites industry so save the date: the two pitches sessions will happen on May 3rd, and the winners will be named on May, 4th at 2.45 pm at JEC World 2022 in Paris as well as online on JEC World Connect platform. This year’s competition is sponsored by Airbus & Mercedes-Benz (Main Innovation Partners) as well as Magna Exteriors (Innovation Partner).

  • A springboard for entrepreneurs in the composites industry

In a few years, JEC Composites Startup Booster has became a reference for entrepreneurship in the composites industry worldwide. Each year before JEC World, among the startups that submitted their application, 20 of them are selected. 20 finalists from all over the world who will join the leading composites trade show to pitch their project on stage before a panel of expert judges.

This competition is a unique opportunity to network and shine a light on what will be the future of the composites industry so save the date: the two pitches sessions will happen on May 3rd, and the winners will be named on May, 4th at 2.45 pm at JEC World 2022 in Paris as well as online on JEC World Connect platform. This year’s competition is sponsored by Airbus & Mercedes-Benz (Main Innovation Partners) as well as Magna Exteriors (Innovation Partner).

Launched in 2017, Startup Booster has been organized in three different regions (Europe, USA and Asia) and has already fostered the emergence of 500+ innovative projects from 50+ countries, 80 finalists and 30 winners, including Arevo, Continuous Composites, ComPair, Fortify and Vartega…
This challenge not only represents an opportunity to the winners of the trophy but to all the parts involved: participants, jury, official partners and the worldwide audience of JEC World. It brings the entire composites value chain together, creating future business opportunities.

The 20 finalists are divided into two categories:
• Process, Manufacturing & Equipment
• Materials & Products

The jury includes representatives from major manufacturers and investors:
Jelle BLOEMHOF, Head of Manufacturing Technologies of Composite, Airbus
Karl-Heinz FULLER, Head of Future Outside & Materials Mercedes-Benz AG
Florent ILLAT, Head of Safran Corporate Ventures, Safran
Brian KRULL, Global Director of Innovation, Magna Exteriors
Tim VORAGE, Founder and Manager Growth Garage Accelerator , Mitsubishi Chemicals Advanced Materials

Two pitch sessions of 10 presentations each will be held in the Agora stage (Hall 5), on Tuesday, May 3, from 10am to 11.25am (Category: Products & Materials) and from 4.30pm to 5.55pm (Category: Process, Manufacturing & Equipment). Three winners will be chosen by the jury and one winner for the sustainable aspects of the project. The awards ceremony will be held on Wednesday, May, 4th at 2.45 pm.

Category “Products & Materials”
o Blackleaf (France)
o Dongnam Realize (South Korea)
o FibreCoat (Germany)
o FVMat (Israel)
o Ora Graphene Audio (Canada)
o Pangolin Defense (France)
o Phononic Vibes (Italy)
o Revolve (Germany)
o Smart Resilin (Israel)
o Space Walker (Japan)

Category “Process, Manufacturing & Equipment”
o Antefil Composite Tech (Switzerland)
o ANYBRID (Germany)
o Atomic-6 (USA)
o Carbon-Drive (Germany)
o Continuum (Denmark)
o Fibraworks (Germany)
o Herone (Germany)
o RVmagnetics (Slovakia)
o Touch Sensity (France)
o XARION Laser Acoustics (Austria)

More information:
JEC Group Startup
Source:

JEC Group

17.02.2022

C.L.A.S.S. will be at Filo to highlight the role of yarns in responsible innovation

The international eco-hub will be at Filo (23-24 February) with key partners such as Bemberg™ by Asahi Kasei, ROICA™ by Asahi Kasei, Ghezzi, Circular Systems™ and SUPREME GREEN COTTON® by Varvaressos to highlight the role of yarns in responsible innovation.

C.L.A.S.S. is ready for yet another moment dedicated to share and amplify its message of responsible innovation together with its key partners. The international eco-hub has been invited to attend the Filo fair with its own space in order to spread the word on the utmost importance of injecting innovation, sustainability and change starting from the very beginning of the supply chain.

“We are extremely pleased to be here at Filo, the fair for the very first and fundamental ingredient of fashion” Says Giusy Bettoni, Founder and CEO C.L.A.S.S. “We believe this is a valuable opportunity to  share possibilities and chances to start a conscious and yet innovative fashion product by learning about the latest developments in smart yarns”.

The international eco-hub will be at Filo (23-24 February) with key partners such as Bemberg™ by Asahi Kasei, ROICA™ by Asahi Kasei, Ghezzi, Circular Systems™ and SUPREME GREEN COTTON® by Varvaressos to highlight the role of yarns in responsible innovation.

C.L.A.S.S. is ready for yet another moment dedicated to share and amplify its message of responsible innovation together with its key partners. The international eco-hub has been invited to attend the Filo fair with its own space in order to spread the word on the utmost importance of injecting innovation, sustainability and change starting from the very beginning of the supply chain.

“We are extremely pleased to be here at Filo, the fair for the very first and fundamental ingredient of fashion” Says Giusy Bettoni, Founder and CEO C.L.A.S.S. “We believe this is a valuable opportunity to  share possibilities and chances to start a conscious and yet innovative fashion product by learning about the latest developments in smart yarns”.

(c) Global Fashion Summit, presented by Global Fashion Agenda
17.02.2022

Global Fashion Summit: Copenhagen Edition 2022 will return on 7-8 June

Global Fashion Summit, an international forum for sustainability in fashion, will convene core stakeholders across fashion, parallel industries, investment, policy and NGOs to forge alliances for a new era. The Summit is presented by Global Fashion Agenda, the non-profit organisation that fosters industry collaboration in fashion to drive impact, under the patronage of HRH The Crown Princess of Denmark. Global Fashion Summit: Copenhagen Edition 2022, will return in physical form on 7-8 June in the Royal Opera House, Copenhagen, Denmark.

Global Fashion Summit, an international forum for sustainability in fashion, will convene core stakeholders across fashion, parallel industries, investment, policy and NGOs to forge alliances for a new era. The Summit is presented by Global Fashion Agenda, the non-profit organisation that fosters industry collaboration in fashion to drive impact, under the patronage of HRH The Crown Princess of Denmark. Global Fashion Summit: Copenhagen Edition 2022, will return in physical form on 7-8 June in the Royal Opera House, Copenhagen, Denmark.

Formerly known as Copenhagen Fashion Summit, the forum has been renamed to manifest the organisation’s global outlook and reach. Global Fashion Summit will build on the 13-year history of the renowned Copenhagen Fashion Summit by strengthening its representation and connections with diverse perspectives from across the world. Therefore, the Summit will be hosted in various key cities in the future, in addition to its flagship edition in Copenhagen.
 
Under the theme ‘Alliances for a New Era’, Global Fashion Summit: Copenhagen Edition 2022 will endeavour to form previously inconceivable alliances within the fashion industry and examine atypical cross-industry alliances, in a bid to accelerate the transition to a net positive reality.
 
The theme will underly all elements of the Summit. It will be represented on the Summit main stage during plenary sessions consisting of high-level keynote speeches and panels. These will bring together speakers that are often perceived as direct competitors to have transparent conversations about their mutual challenges and collaborate to discuss the actions needed to tackle the urgent issues. The programme will also include industries such as transportation, food and energy, to consider the challenges that are similarly experienced in other sectors and learn from successful solutions that are being demonstrated outside of fashion.
 
Going beyond the stage content, the Summit will apply the theme in practical terms by mobilising leaders to implement immediate actions through newly formed partnerships with solution providers and other industry players, setting long-term industry commitments, hosting leadership roundtables and creating binding industry agreements that will provoke progress based on its sustainability performance level.
The Innovation Forum will present a curated exhibition of sustainable solutions. Participating brands will be able to connect with exhibitors covering the entire value chain – from innovative materials to on-demand manufacturing. The forum’s Matchmaking service will offer small and large fashion businesses the opportunity to advance their sustainability journey by being matched directly with relevant solution providers.
There will be an in-depth assessment of the impact that the Summit and its resulting alliances have on the industry. This will be published in the aftermath of the event, examining the concrete outcomes from the Summit and providing a baseline for future forums.

Source:

Global Fashion Agenda

07.02.2022

Bemberg™ by Asahi Kasei is back at Première Vision

Bemberg™ is back at Première Vision to celebrate its 90th anniversary through its latest collections, premium partnerships with contemporary brands such as ECOALF and a brand new visual identity. The industry-leading textile fair will represent another pivotal occasion for Bemberg™ to showcase its latest claim “Crafted Elegance”, which perfectly embodies its values of preciousness, quality and refined aesthetic blended with innovation and responsible values.

Born in 2009, both the name and concept of ECOALF came after the birth of Javier Goyenche’s - founder and president - two sons: Alfredo and Alvaro. He wanted to create a truly sustainable fashion brand and believed the most sustainable action to take was to stop using natural resources in a careless way to ensure them to the next generation. Since then, Ecoalf’s mission has been to make a new generation of recycled products with the same quality and design as the best non-recycled.

Based on this design idea, the Mery dress and Patrica pants are part of Ecoalf’s FW21 collection and both made with 100% Bemberg ™ Cupro by Asahi Kasei.

Bemberg™ is back at Première Vision to celebrate its 90th anniversary through its latest collections, premium partnerships with contemporary brands such as ECOALF and a brand new visual identity. The industry-leading textile fair will represent another pivotal occasion for Bemberg™ to showcase its latest claim “Crafted Elegance”, which perfectly embodies its values of preciousness, quality and refined aesthetic blended with innovation and responsible values.

Born in 2009, both the name and concept of ECOALF came after the birth of Javier Goyenche’s - founder and president - two sons: Alfredo and Alvaro. He wanted to create a truly sustainable fashion brand and believed the most sustainable action to take was to stop using natural resources in a careless way to ensure them to the next generation. Since then, Ecoalf’s mission has been to make a new generation of recycled products with the same quality and design as the best non-recycled.

Based on this design idea, the Mery dress and Patrica pants are part of Ecoalf’s FW21 collection and both made with 100% Bemberg ™ Cupro by Asahi Kasei.

The Parisian exhibition completes the company’s celebrative two-chapter journey. The first half was presented during Pitti Uomo, where Bemberg™ showed archival suits crafted by the historic Sartoria Litrico and lined in Cupro. Behind them stood the new visual image of Bemberg™, focused on exceptional beauty, one-of-a-kind uniqueness and joyful comfort.

Source:

Bemberg™ by Asahi Kasei / C.L.A.S.S.

Photo: RadiciGroup
31.01.2022

RadiciGroup: New ski suit featuring total end-of-life recyclability

  • Sustainability at Milano Unica:  Ecodesign for an environmentally friendly fashion industry.

A ski suit made of yarn obtained from recycled materials and fully recyclable at end-of-life, without giving up on style, design and technical performance: this is RadiciGroup’s business card at the 34th Milano Unica, the international high-end textiles trade show taking place at the Milan Rho Fairground on 1-2 February.

In the Innovation Area of TexCubTec, Sistema Moda Italia’s technical and functional textile section, visitors can see and touch the new uniform of the RadiciGroup Ski Club designed by RadiciGroup in collaboration with the DKB sportswear brand.

  • Sustainability at Milano Unica:  Ecodesign for an environmentally friendly fashion industry.

A ski suit made of yarn obtained from recycled materials and fully recyclable at end-of-life, without giving up on style, design and technical performance: this is RadiciGroup’s business card at the 34th Milano Unica, the international high-end textiles trade show taking place at the Milan Rho Fairground on 1-2 February.

In the Innovation Area of TexCubTec, Sistema Moda Italia’s technical and functional textile section, visitors can see and touch the new uniform of the RadiciGroup Ski Club designed by RadiciGroup in collaboration with the DKB sportswear brand.

“The ski suit, consisting of jacket and trousers, is fashioned with fabric made of RENYCLE®, a RadiciGroup yarn obtained from mechanically recycled nylon,” pointed out Marco De Silvestri, sales & marketing manager – Apparel and Technical of RadiciGroup Advanced Textile Solutions business area. “In addition, the suit’s padding and numerous accessories, such as zippers, Velcro, buttons and thread, are also made of polyamide. It was an ambitious project and we reached a definitive goal: circularity in sportswear without compromising on performance. A goal achieved through continuous close collaboration with other companies in the chain to develop chemically compatible materials that guarantee the high technical performance required by this kind of application.”

At Milano Unica, besides RENYCLE®, RadiciGroup is showcasing garments made of   REPETABLE®, a polyester yarn obtained from post-consumer recycled plastic bottles, and articles made of BIOFEEL®, a brand identifying both nylon and polyester yarn made from renewable source materials.

More information:
Radici RadiciGroup
Source:

RadiciGroup

Nikolaus Bader, Pixabay
31.01.2022

Premium Group returns to Berlin: New Concept premiers in July

Premium Group, important trade fair organiser in the German fashion industry and biggest player for advanced contemporary fashion in Europe, is returning to the capital and, in July 2022, is set to present a completely new live event concept around the Berlin Radio Tower and summer garden.
 
Interactive live event concept for B2B and D2C and redefines the future of fashion fairs
After decades of everything being the same, the constantly changing market environment forces brands, retailers, consumers and trade fair organisers alike to continuously develop and reposition themselves. Two years after the start of the pandemic, the Berlin-based company is now reacting with a surprising step: Anita Tillmann, Jörg Arntz and the team are bringing their passion for people, fashion, innovation and entertainment back home and setting new standards for live fashion events.
 

Premium Group, important trade fair organiser in the German fashion industry and biggest player for advanced contemporary fashion in Europe, is returning to the capital and, in July 2022, is set to present a completely new live event concept around the Berlin Radio Tower and summer garden.
 
Interactive live event concept for B2B and D2C and redefines the future of fashion fairs
After decades of everything being the same, the constantly changing market environment forces brands, retailers, consumers and trade fair organisers alike to continuously develop and reposition themselves. Two years after the start of the pandemic, the Berlin-based company is now reacting with a surprising step: Anita Tillmann, Jörg Arntz and the team are bringing their passion for people, fashion, innovation and entertainment back home and setting new standards for live fashion events.
 
The creators of PREMIUM, SEEK, FASHIONTECH and THE GROUND are redesigning the sustainability of future-proof fashion fairs with the commitment of the Berlin government, and launching a completely new event concept in which the B2B and D2C sectors merge. In the new Premium Group cosmos, brands can present themselves emotionally and interactively to retailers and consumers. All realities are represented: the new kids in the industry, such as D2C brands, e-com and influencers, are given their place in the Premium Group cosmos in the form of the new fashion festival THE GROUND. But also long-standing partners of established brands and representatives from traditional stationary retail will profit from further developed B2B spaces.

Taking into account the different needs of all visitors, the events will take place from Thursday to Saturday for the first time: from 7 to 9 July 2022.
 
Classic trade fair formats are no longer up to date
'Classic trade fair formats are no longer up to date', sums up Anita Tillmann, Managing Partner of the Premium Group. 'We have to reinvent ourselves and look to the future – to a new stage in the life of the fashion industry post pandemic, which has changed everything. Digitisation, climate change, pandemic, changing values, new industry cycles and new players, as well as topics around gender equality, diversity, metaverse, gaming and NFTs, are just a few areas we are dealing with. We aim to set new standards for the future of trade events and merge B2B and D2C with our new event concept.'
 
Move to Frankfurt am Main fell victim to the coronavirus
The planned kick-off of the Premium Group Events in Frankfurt am Main could not take place because of the coronavirus, and the plan to establish the events at the new location has fallen victim to the pandemic.
 
'It's a shame that the move to Frankfurt didn't work out', says Jörg Arntz, Managing Director of the Premium Group. 'We all tried very hard and did our best. As an entrepreneur, you always have to remain capable of acting and questioning decisions that have been made. In order to do justice to our customers and the market environment, we have decided – after intensive discussions with the city of Berlin – to hold our events in our home city again. We are Berliners at heart and are confident that the new government will anchor Berlin as Europe's creative metropolis in a sustainable and economic way.'

New government brings Premium Group power back to Berlin
“Berlin is THE metropolis for the cultural and creative industries and Europe's largest start-up scene. As the new state government, we are committed to an economically strong Berlin. Trade fairs and events are an important economic factor and a centre of attraction for Berliners and guests from all over the world. We are therefore delighted that we have succeeded in bringing the events of the Premium Group back home”, says Franziska Giffey, Mayor of Berlin.
 
“The Premium Group events strengthen Berlin as a fashion and trade fair location, attract tens of thousands of trade visitors and fashion enthusiasts, create additional economic effects in hotels, gastronomy, retail and the service industry, multiply the global appeal of the city as a location and will open the summer of creativity brilliantly in July. The fact that the fair organiser is returning to its home venue with a new concept is a special opportunity for Berlin and will give the city an additional boost. Opening up the events to end consumers ideally rounds off the trade fair concept. With the Premium Group, Berlin will sustainably strengthen the core themes of fashion and digital transformation”, says Stephan Schwarz, Senator for Economics, Energy and Operations.

Source:

PREMIUM Exhibitions GmbH

(c) Huntsman TextileEffects
25.01.2022

Huntsman Textile Effects at Colombiatex 2022

  • High-Performance Solutions and Protection Effects

Huntsman Textile Effects, a global leader in innovative and sustainable textile dyes and protection effects, is bringing a complete suite of solutions for performance apparel, technical textiles and casual wear to Colombiatex de las Américas 2022 from January 25 to 27.

Sustainable solutions
Huntsman Textile Effects will showcase the latest addition to the third generation of its AVITERA® SE polyreactive dye range; it delivers brilliant bluish-red shades while reducing the water and energy required for production by up to 50% and increasing mill output by up to 25% or more. It also outperforms the best available dyeing technologies for cellulosic fibers and blends in terms of value by reducing recipe costs, minimizing processing costs and eliminating reprocessing.

  • High-Performance Solutions and Protection Effects

Huntsman Textile Effects, a global leader in innovative and sustainable textile dyes and protection effects, is bringing a complete suite of solutions for performance apparel, technical textiles and casual wear to Colombiatex de las Américas 2022 from January 25 to 27.

Sustainable solutions
Huntsman Textile Effects will showcase the latest addition to the third generation of its AVITERA® SE polyreactive dye range; it delivers brilliant bluish-red shades while reducing the water and energy required for production by up to 50% and increasing mill output by up to 25% or more. It also outperforms the best available dyeing technologies for cellulosic fibers and blends in terms of value by reducing recipe costs, minimizing processing costs and eliminating reprocessing.

ERIOPON® E3-SAVE is another next-generation water-saving innovation. An all-in-one textile auxiliary for polyester processing, it allows pre-scouring, dyeing and reduction clearing to be combined in a single bath and eliminates the need for anti-foaming products. This shortens processing time and saves water and energy.

rPET processing innovations
As leading brands begin to work towards a circular economy for textiles, mills are being asked to overcome challenges associated with transforming recycled polyester (rPET) into high-quality new textiles. Huntsman Textile Effects is presenting an end-to-end solution for achieving full whites and consistent shades on rPET with right-first-time quality. This eco-friendly rPET processing solution includes pre-treatment chemicals, fluorescent whitening agents, state-of-the-art washfast dyes, and finishing solutions for high-performance protection and comfort.

Washfast disperse dyes for polyester and man-made fibers
TERASIL® BLUE W is the latest addition to Huntsman’s TERASIL® W/WW range of washfast disperse dyes for polyester and man-made fibers and their blends. Crucially, it is not sensitive to reduction, leading to higher reproducibility, higher right first-time results and operational excellence. It also reduces overall water and energy consumption, as well as water effluent. TERASIL® BLUE W offers high build-up for deep blues that stay vibrant.

Next-generation odor control
In partnership with Sciessent, Huntsman Textile Effects presents antimicrobial and odor-control solutions to Colombiatex to enable mills to produce garments that smell fresh for longer and need less frequent washing. Featured is Sciessent’s new anti-odor technology - NOBO™. It is specifically designed to reduce odors in natural and synthetic fabrics; it can be incorporated into virtually any fabric. From base layer and activewear tops to socks and underwear to jeans and chinos. It offers a cost-effective way to upgrade everyday products and add value to your customers.

“Sustainability is becoming a priority for regulators in South America and around the world, and consumers are increasingly keen to make a difference by choosing green brands,” said Ben Powell, Commercial Director Americas, Huntsman Textile Effects. “Huntsman is redefining what’s possible to help textile and apparel companies make the shift to more environmentally sustainable operations while enhancing their competitiveness at the same time. Our innovations make it possible to benefit from efficiency gains and resource savings in the factory as you deliver products that stand out in the market.”

More information:
Huntsman Textile Effects
Source:

Huntsman TextileEffects

24.01.2022

JEC World 2022 postponed

After thorough consultation with the exhibitors and partners of the event, JEC Group has decided to postpone the 2022 edition of JEC World. The world’s leading composites event will now take place from May 3rd to 5th, 2022, at the same venue Paris Nord Villepinte, as well as online via the JEC World Connect digital platform.

JEC World gathers the whole value chain of the composite materials industry in Paris, France every year and is “the place to be” for composites professionals from all over the world. The event brings together not only all major global companies, but also innovative startups in the field of composites and advanced materials, experts, academics, scientists, and R&D leaders. JEC World is also the “festival of composites”, offering a unique showcase of what composites can offer to various application sectors, from aerospace to marine, from construction to automotive, and an unlimited source of inspiration for participants from these industries.

After thorough consultation with the exhibitors and partners of the event, JEC Group has decided to postpone the 2022 edition of JEC World. The world’s leading composites event will now take place from May 3rd to 5th, 2022, at the same venue Paris Nord Villepinte, as well as online via the JEC World Connect digital platform.

JEC World gathers the whole value chain of the composite materials industry in Paris, France every year and is “the place to be” for composites professionals from all over the world. The event brings together not only all major global companies, but also innovative startups in the field of composites and advanced materials, experts, academics, scientists, and R&D leaders. JEC World is also the “festival of composites”, offering a unique showcase of what composites can offer to various application sectors, from aerospace to marine, from construction to automotive, and an unlimited source of inspiration for participants from these industries.

“We are fully dedicated to supporting the composites industry and to fostering its development via our events and media activities. Exhibitors and partners are strongly supporting JEC World, their leading event and want to meet in person in 2022 to activate business, share knowledge and highlight innovations. Postponing from March to May is a way to offer improved conditions to satisfy the industry requirements for such a trade fair as JEC World”, says Eric Pierrejean, CEO of JEC Group.

The JEC World team has decided to postpone the event after conducting a survey of its exhibitors and partners, confirming that a large majority is in favour of the new dates in May. As already planned, for three days, the event will offer for the first time a digital platform, JEC World Connect, in parallel to the in-person event in Paris for an augmented digital experience. Even after the show, via the JEC Web TV, unique content will be available to extend the reach of the event.

“Our main concern is to create the best possible conditions for our participants for successful networking, inspiration and business success. With a postponement of eight weeks we can enable this and offer to the industry the event it deserves. Taking the decision now, after consultation of all exhibitors, was necessary to give them planning and preparation visibility,” adds Thomas Lepretre, VP Events, Sales and Operations.

Source:

JEC Group

(c) Sitip
21.01.2022

Sitip presents COSMOPOLITAN Fashion-tech fabrics at Milano Unica

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

For the production of contemporary urbanwear, thought for the city, Sitip showcases the man’s suit made of jacket+trousers in warp-knit Cosmopolitan Citylife fabric: bi-stretch nylon with UV protection (UPF 50+), quick drying, easy care and skin comfort. Highly performing, breathable, comfortable, insulating and with an exceptional fit: incredible elegance and comfort that enhance the contemporary urbanwear style.

For women, Sitip presents COSMOPOLITAN Fashiontech fabrics dedicated to athleisure, with leggings made - for the summer version - in Cosmopolitan London, a bi-stretch circular knitted fabric, no seethrough, breathable, comfortable on the skin with UV protection (UPF 50+), with easy care and perfect shape retention, and - for the winter version - in Cosmopolitan Paris GZ, a circular knitted fabric raised on the reverse side, with the same properties as the previous one and thermoregulation characteristics.

The Instinct fabric is available in the recycled and raised version NATIVE INSTINCT GZ: a GRS certified thermal fabric made with pre-consumer recycled yarns, bi-stretch, breathable, resistant to pilling, easy care and high comfort, ideal for sporty knitwear and urbanwear part of the NATIVE SUSTAINABLE TEXTILES family, the Sitip fabric collection produced with GRS certified recycled yarns and low environmental impact chemicals with a lower consumption of natural resources , able to respect the environmental and social criteria extended to all the stages of the production chain, including the traceability of raw materials. Sitip also operates in line with international certifications such as OEKO-TEX®, BLUESIGN®, GRS and adheres to the ZDHC gateway, adding to these an ISO 14001 environmental management system, which certifies the company’s commitment to reducing pollution risks.

Source:

Sitip / Valeria Rastrelli

(c) Messe Frankfurt (HK) Ltd.
21.01.2022

Promising conditions for Cinte Techtextil China in September

Promising conditions in the technical textiles and nonwovens market are expected to provide ample opportunities for suppliers at this year’s Cinte Techtextil China. The fair, which last year saw 366 exhibitors and 14,868 visits, will take place from 6 – 8 September 2022 at the Shanghai New International Expo Centre. Flexible exhibiting options will once again be available for overseas companies.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd, explained the positive conditions that exhibitors should expect at the fair thusly: “The pandemic has led to a surge in Chinese exports of both technical textiles and nonwovens, the latter in particular. The country remains the largest supplier of nonwovens, comprising one-third of the global total, yet still requires the advanced offerings of overseas machinery suppliers, as well as supplies of raw materials, to support its export production.”

Promising conditions in the technical textiles and nonwovens market are expected to provide ample opportunities for suppliers at this year’s Cinte Techtextil China. The fair, which last year saw 366 exhibitors and 14,868 visits, will take place from 6 – 8 September 2022 at the Shanghai New International Expo Centre. Flexible exhibiting options will once again be available for overseas companies.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd, explained the positive conditions that exhibitors should expect at the fair thusly: “The pandemic has led to a surge in Chinese exports of both technical textiles and nonwovens, the latter in particular. The country remains the largest supplier of nonwovens, comprising one-third of the global total, yet still requires the advanced offerings of overseas machinery suppliers, as well as supplies of raw materials, to support its export production.”

Ms Wen continued: “Domestically, China is seeing increasing consumption of functional apparel, sportswear and personal protection items. Heightened health and sanitary regulations and new hygiene habits will also continue to drive demand, especially for nonwovens, well into the future. There has also been a post-pandemic boost in demand for filter, greenhouse covering and high-density fabrics amongst others. All of this adds up to a wealth of opportunities for overseas companies to take advantage of, as was experienced in the 2021 edition of the fair.”

Exhibitor and visitor experiences in 2021
“Our organisation promotes US cotton and we hope to use this platform to meet more companies and brands in the nonwovens industry who are interested in US cotton, and to meet up with old friends to discuss the current situation and industry trends. We also found some new potential clients this time.” Mr Eric Ni, Senior Manager, China Supply Chain Marketing, Fabrics, Garments and Nonwovens, Cotton Council International, USA

“Cinte Techtextil China is a professional exhibition that brings together cutting-edge technologies and products, allowing us to quickly learn about innovative technology trends in the industry. I’ve been particularly impressed by the biodegradable products in the Innovation Showcase. In addition, I am sourcing mask-related products and mops, and I have found some companies that I’m interested in.” Ms Claire Zhang, Senior Scientist, Personal Health, Philips Research China, Philips (China) Investment Co Ltd, China

Source:

Messe Frankfurt (HK) Ltd.

19.01.2022

EFI Connect Conference highlights new Digital Print Innovations

During the 22nd annual Connect conference at the Wynn Las Vegas Resort, Electronics For Imaging, Inc. is highlighting digital print innovations, that give print businesses more capability and profit potential in a range of market applications. Display graphics inkjet offerings at Connect from the company’s leading-edge product portfolio include the new EFI™ Pro 30h production printer. Plus, Connect features the first-ever live demonstration of the new EFI Fiery® FS500 Pro digital front end (DFE) – the most-advanced print server in EFI’s 30+ year history – and the debut of the EFI Fiery Impress™ DFE, a scalable, flexible server and colour management solution for inkjet label and packaging applications as well as for inline manufacturing lines that need variable print.
                                               
EFI Connect has more than 130 break-out sessions presenting the latest tips and trends across all the industry segments EFI supports. This includes sessions addressing the growing analogue-to-digital transformation opportunities using EFI’s industrial Corrugated & Packaging, Textile, and Building Materials/Décor solutions.

During the 22nd annual Connect conference at the Wynn Las Vegas Resort, Electronics For Imaging, Inc. is highlighting digital print innovations, that give print businesses more capability and profit potential in a range of market applications. Display graphics inkjet offerings at Connect from the company’s leading-edge product portfolio include the new EFI™ Pro 30h production printer. Plus, Connect features the first-ever live demonstration of the new EFI Fiery® FS500 Pro digital front end (DFE) – the most-advanced print server in EFI’s 30+ year history – and the debut of the EFI Fiery Impress™ DFE, a scalable, flexible server and colour management solution for inkjet label and packaging applications as well as for inline manufacturing lines that need variable print.
                                               
EFI Connect has more than 130 break-out sessions presenting the latest tips and trends across all the industry segments EFI supports. This includes sessions addressing the growing analogue-to-digital transformation opportunities using EFI’s industrial Corrugated & Packaging, Textile, and Building Materials/Décor solutions.
 
EFI Connect also marks the debut of an innovative prepress product for display graphics businesses, EFI Fiery Prep-it™ software for the preparation, layout, and automated production of print-for-cut jobs. Designed to address productivity needs amid continued labour shortages, this powerful and cost-saving true-shape nesting solution reduces the time needed to nest complex objects for wide-format printing by up to 90%. Compared with competing products, Fiery Prep-it software also reduces media usage by 10% or more, helping to alleviate media supply constraints. With the media savings it generates, this affordable, effective software can pay for itself in four months or less, helping print shops become more competitive.

(c) nova-Institut GmbH
19.01.2022

International Conference on Cellulose Fibres 2022 presents final program

The final program will provide valuable information on the various use-opportunities for cellulosic fibres through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp, cellulosic fibres and yarns. In addition, examples of non-wovens, packaging and composites will offer a look beyond the horizon of conventional application fields.

You can expect to see the “Top 6” candidates of the “Cellulose Fibre Innovation of the Year 2022” in Cologne. For the second time, the innovation award will be granted to the innovative cellulose fibre industry for developing new technologies and applications. All producers and inventors along the entire value chain from feedstock to the final product are invited to join the competition. The Cellulose Fibre Innovation of the Year 2022 Award will be voted for by conference delegates as well as online participants on the afternoon of 2 February.

The final program will provide valuable information on the various use-opportunities for cellulosic fibres through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp, cellulosic fibres and yarns. In addition, examples of non-wovens, packaging and composites will offer a look beyond the horizon of conventional application fields.

You can expect to see the “Top 6” candidates of the “Cellulose Fibre Innovation of the Year 2022” in Cologne. For the second time, the innovation award will be granted to the innovative cellulose fibre industry for developing new technologies and applications. All producers and inventors along the entire value chain from feedstock to the final product are invited to join the competition. The Cellulose Fibre Innovation of the Year 2022 Award will be voted for by conference delegates as well as online participants on the afternoon of 2 February.

The internationality of this Cellulose Fibres gathering is reflected in its colourful line-up of international speakers. 42 speakers from 12 countries will demonstrate the differences in regional development paths and their transferability to other areas.

You can view the final program here.

(c) CHIC
07.01.2022

Postponement of CHIC SPRING Shanghai

Asia's largest fashion fair, CHIC SPRING SHANGHAI, will postpone the event planned for March to April 14-16, 2022. The latest worldwide pandemic developments due to the new virus variant Omicron prompted the CHIC organizers to take this step.

With this relocation, the organizers are also taking into account the interests of international exhibitors and visitors. In addition to various international joint stands, Germany will also be represented with a GERMAN PAVILION. The trade fair team is working on innovations at the trade fair with the highest priorities and will now focus the entire marketing on the new date.

CHIC SPRING is the showcase for the latest trend developments in fashion and offers trade visitors a concentrated overview. CHIC SPRING as a fashion and lifestyle fair shows the areas of womenswear, menswear, kidswear, denim, shoes and bags, accessories, designers and streetwear in clear segments at the National Convention & Exhibition Center in Shanghai.

Asia's largest fashion fair, CHIC SPRING SHANGHAI, will postpone the event planned for March to April 14-16, 2022. The latest worldwide pandemic developments due to the new virus variant Omicron prompted the CHIC organizers to take this step.

With this relocation, the organizers are also taking into account the interests of international exhibitors and visitors. In addition to various international joint stands, Germany will also be represented with a GERMAN PAVILION. The trade fair team is working on innovations at the trade fair with the highest priorities and will now focus the entire marketing on the new date.

CHIC SPRING is the showcase for the latest trend developments in fashion and offers trade visitors a concentrated overview. CHIC SPRING as a fashion and lifestyle fair shows the areas of womenswear, menswear, kidswear, denim, shoes and bags, accessories, designers and streetwear in clear segments at the National Convention & Exhibition Center in Shanghai.

CHIC is organized by Beijing Fashion Expo Co. Ltd. and China World Exhibitions, supported by the China National Garment Association, the China World Trade Center and the Sub-Council of the Textile Industry (CCPIT).

More information:
CHIC Fair CHIC Shanghai
Source:

JANDALI MODE.MEDIEN.MESSEN

04.01.2022

Cellulose Fibres: New Technologies for Pulp, Fibres and Yarns

  • Session "New Technologies for Pulp, Fibres and Yarns"

Cellulose fibres are a true material miracle as they offer a steadily expanding, broad range of applications. Meanwhile markets are driven by technological developments and policy frameworks, especially bans and restrictions on plastics, as well as an increasing number of sustainability requirements. The  presentations will provide valuable information on the various use-opportunities for cellulosic fibres through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp cellulosic fibres and yarns. In addition, examples of non-wovens,  packaging and composites will offer a look beyond the horizon of conventional application fields.

  • Session "New Technologies for Pulp, Fibres and Yarns"

Cellulose fibres are a true material miracle as they offer a steadily expanding, broad range of applications. Meanwhile markets are driven by technological developments and policy frameworks, especially bans and restrictions on plastics, as well as an increasing number of sustainability requirements. The  presentations will provide valuable information on the various use-opportunities for cellulosic fibres through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp cellulosic fibres and yarns. In addition, examples of non-wovens,  packaging and composites will offer a look beyond the horizon of conventional application fields.

The extensive fifth conference session, “New Technologies for Pulp, Fibres and Yarns”, includes the participation of eight speakers and promises the reveal of various innovations and new approaches. These address the processing of pulp, fibres and yarn, with the aim of realizing most sustainable and efficient solutions. The broad spectrum of topics ranges from processing cellulose with ionic liquids, material farming and chemical modification of pulp to functionalised fibres for feel-good textiles.

Speakers of the Session "New Technologies for Pulp, Fibres and Yarns"

  • Antje Ota - Deutsche Institute für Textil- und Faserforschung (DITF) (DE): The Versatility of the HighPerCell® Technology for Cellulose Filament
  • Carlo Centonze - HEIQ (CH): HeiQ AeoniQ – Cellulose Yarn Focussed on Climate and Circularity
  • Manuel Steiner - LIST Technology AG (CH): Cellulose Dissolving Technology Platform
  • Dominik Mayer - Kelheim Fibres (DE): Functionalized Viscose Fibres for Wellbeing Textiles: How Infrared Celliant® Viscose supports a Healthy and Sustainable Lifestyle
  • Michael Sturm - TITK (DE): Method for the Evaluation of the dissolution Power and dissolution Quality of Cellulosic Raw Materials dissolved in New Ionic Liquids
  • Kaoutar Aghmih - Hassan II University (MA): Rheology and Dissolution of Cellulose in Ionic Liquid Solutions
  • Ofir-Aharon Kuperman - Weizmann Institute of Science (IL): Material Farming and Biological Fabrication of Cellulose Fibers with Tailored Properties
  • Taina Kamppuri - VTT Technical Research Center of Finnland (FI): Chemically Modified Kraft Pulps to Improve the Sustainability of Regenerated Fibres
CCF2022 New Opportunities for Cellulose Fibres in Replacing Plastics
Session "Recycling and Other Alternative Feedstocks"
29.12.2021

New Opportunities for Cellulose Fibres in Replacing Plastics

  • Session "Recycling and Other Alternative Feedstocks"

Cellulose fibres are a true material miracle as they offer a steadily expanding, broad range of applications. Meanwhile markets are driven by technological developments and policy frameworks, especially bans and restrictions on plastics, as well as an increasing number of sustainability requirements. The  presentations will provide valuable information on the various use-opportunities for cellulosic fibres through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp, cellulosic fibres and yarns. In addition, examples of non-wovens,  packaging and composites will offer a look beyond the horizon of conventional application fields.

  • Session "Recycling and Other Alternative Feedstocks"

Cellulose fibres are a true material miracle as they offer a steadily expanding, broad range of applications. Meanwhile markets are driven by technological developments and policy frameworks, especially bans and restrictions on plastics, as well as an increasing number of sustainability requirements. The  presentations will provide valuable information on the various use-opportunities for cellulosic fibres through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp, cellulosic fibres and yarns. In addition, examples of non-wovens,  packaging and composites will offer a look beyond the horizon of conventional application fields.

The fourth session, "Recycling and other alternative raw materials", will cover topics ranging from textile recycling - both cotton and regenerated cellulose fibres - to the use of hemp shives as raw material. Self-initiated cooperation and waste management pave the way to a fully closed European material loop where textile waste is collected, recycled and reprocessed into new raw materials.

The speakers will demonstrate the importance of cooperation in recycling fabrics already in circulation, perfectly following the topics and discussions of the previous conference day.

  • Heikki Hassi - SciTech-Service (FI):  Textile Recycling and MMCFs; Systemic Challenges, Market Opportunities and Advancing Technologies
  • Valerie Langer - Canopy (CA): The Perfect Storm – A Five Year Feedstock Shift Forecast
  • Helena Claesson - Södra (SE): Two is better than one – Lenzing and Södra together Face the Challenge of Recycling of Textiles
  • Marina Crnoja-Cosic - Kelheim Fibres (DE) and Harald Cavalli-Björkman - re:newcell (SE): Sustainable Cellulosic Fibres from Recycled Raw Materials – A Solution for Europe
  • Frank Meister - Thüringisches Institut für Textil- und Kunststoff-Forschung (DE): Lyohemp Fibres Made of Dissolving Pulp Based on Hemp Shives
  • Miguel Sanchis-Sebastiá - ShareTex (SE): Expanding Textile Recycling Beyond Cotton: Innovations to Recycle Regenerated Cellulose Fibers
29.12.2021

MUNICH FABRIC START from 25 - 27 January 2022 is cancelled

  • BLUEZONE & KEYHOUSE move forward to 3 - 4 May 2022

The team of the Munich Fabric Start Exhibitions GmbH has dedicated the last weeks to the finalisation of the upcoming BLUEZONE and MUNICH FABRIC START: the new measures for safe events have been implemented; the organisers are ready to welcome the industry In Munich in just a few weeks.

And the current status is impressive: more than 600 suppliers from 33 countries are registered for
MUNICH FABRIC START from which some 90 international denim mills are ready to show at BLUEZONE. In such extraordinary times, the enormous support from the industry is a milestone and anything but a matter of course.

At the same time, the ongoing dynamic situation, the ever-increasing demands on events and the enormous
planning uncertainty make the next necessary steps more difficult. With the rapidly increasing infection
rates of the Omicron variant across Europe and especially in some neighbouring countries that are
already in a new lockdown, the organisers do face very complex challenges in many respects.

  • BLUEZONE & KEYHOUSE move forward to 3 - 4 May 2022

The team of the Munich Fabric Start Exhibitions GmbH has dedicated the last weeks to the finalisation of the upcoming BLUEZONE and MUNICH FABRIC START: the new measures for safe events have been implemented; the organisers are ready to welcome the industry In Munich in just a few weeks.

And the current status is impressive: more than 600 suppliers from 33 countries are registered for
MUNICH FABRIC START from which some 90 international denim mills are ready to show at BLUEZONE. In such extraordinary times, the enormous support from the industry is a milestone and anything but a matter of course.

At the same time, the ongoing dynamic situation, the ever-increasing demands on events and the enormous
planning uncertainty make the next necessary steps more difficult. With the rapidly increasing infection
rates of the Omicron variant across Europe and especially in some neighbouring countries that are
already in a new lockdown, the organisers do face very complex challenges in many respects.

After the extensive consideration of the overall situation with an extremely serious situation
in many places, the organisers feel obliged to cancel MUNICH FABRIC START Spring.Summer 23
from 25 - 27 January 2022.

With regards to BLUEZONE and KEYHOUSE, an alternative scenario will be realised:
both formats will skip the January show and move forward to 3 – 4 May 2022 as a dedicated
denim and innovation show on the Zenith grounds in Munich.

The decisive factors for this major decision are various realistic scenarios which need to be considered to occur within the coming weeks: a new lockdown in Germany with a possible event ban imposed at very short notice, further restrictions on events and additional travel restrictions.

Source:

munich fabric start

(c) Messe Frankfurt, deepak@deepakdavda.com
13.12.2021

Techtextil India: First post-lockdown edition with overwhelming responsive from industry

After three-days of product sourcing and business networking, Techtextil India 2021 in Mumbai concluded in a strong and positive note. The trade fair emerged as a crucial meeting place for the technical textile players to rebuild their supplier links, promote industry integration and engage in lucrative knowledge exchange.

The eighth edition of Techtextil India stood out to be a ground-breaking business platform for the technical textile sector to build a new and strong foundation in the new normal. The aim of the new edition was to promote industry unification and business recovery across the value chain of technical textiles.

The event held at Bombay Exhibition Centre was inaugurated by major dignitaries, including Shri Ajit Chavan, Secretary – Textiles Committee, Ministry of Textiles, Government of India. Over the course of its three buzzing days, the show garnered an attendance of 4,087 visitors drawn by live demonstration of latest products, technologies and innovations exhibited by over 150 technical textile brands on the show floor.

After three-days of product sourcing and business networking, Techtextil India 2021 in Mumbai concluded in a strong and positive note. The trade fair emerged as a crucial meeting place for the technical textile players to rebuild their supplier links, promote industry integration and engage in lucrative knowledge exchange.

The eighth edition of Techtextil India stood out to be a ground-breaking business platform for the technical textile sector to build a new and strong foundation in the new normal. The aim of the new edition was to promote industry unification and business recovery across the value chain of technical textiles.

The event held at Bombay Exhibition Centre was inaugurated by major dignitaries, including Shri Ajit Chavan, Secretary – Textiles Committee, Ministry of Textiles, Government of India. Over the course of its three buzzing days, the show garnered an attendance of 4,087 visitors drawn by live demonstration of latest products, technologies and innovations exhibited by over 150 technical textile brands on the show floor.

The event received an overwhelming response, reflecting industry’s keen interest to explore new developments and opportunities in technical textiles. In regards to the same, Mr Abhijit Kulkarni, President – Textile Engineering Group, A.T.E. India, stated: “It was the first and best physical show also on hybrid mode filled with enthusiastic buyers and customers who visited our booth and had very fruitful discussions with us. Several leading textile manufacturers visited our stalls, including: Strata Geosystems India, SKAPS Industries, Reliance Composites, Paramount Textiles, and Welspun, to name a few.”

Alok Masterbatches Pvt Ltd, Khosla Profile Pvt Ltd, ATE Group, Lucky International, Meera Industries Limited, Park Non-Woven Pvt Ltd, Sarex Chemicals, SICAM, Suntech Geotextile Pvt Ltd and Weavetech Engineers, were among the leading Indian companies exhibiting at the show.

The significance of the three-day fair was further elevated by the German pavilion. Technical textile manufacturers from Germany, such as Autefa Solution Germany GmbH, DILO Systems GmbH, Emtec Electronic GmbH, Georg Sahm GmbH & Co, Karl Mayer Verwaltungsgesellschaft mbH, Merz Maschinenfabrik GmbH and Oerlikon Barmag Zweigniederlassung der Oerlikon Textile GmbH & Co, displayed their latest technologies on the show floor, which garnered significant attention from the Indian buyers.

The first Digital Symposium was another highlight of Techtextil India 2021. The forum delved into a series of crucial topics in technical textiles discussing PLI schemes, FDI opportunities and policies, investment opportunities in Tamil Nadu, & New Investment Opportunities, Sustainable Technical Textiles and Global sustainable approach for Textiles with Antimicrobial Performance.

Concluding on a successful note, Techtextil India 2021 emerged as a platform of new beginnings for the technical textiles sector and for businesses trying to retain their shape and seeking momentum after the tough pandemic phase.

Source:

Messe Frankfurt HK

(c) Koelnmesse / imm cologne
13.12.2021

imm cologne: Restart postponed to 2023

imm cologne will not take place on the planned dates in January 2022 in Cologne. The executive board of Koelnmesse reached this decision in close consultation with the Association of the German Furniture Industry (VDM) and in agreement with other well-known industry representatives at the international level. "This step is restricted exclusively to imm cologne and its specific requirements for trade fair operations. We are principally planning, as before, to carry out our spring events in 2022. The political guidelines allow for this, and, following the excellent and safe course of the past autumn trade fairs, this must remain our mission in the interests of the participating industries“, says COO Oliver Frese.

imm cologne will not take place on the planned dates in January 2022 in Cologne. The executive board of Koelnmesse reached this decision in close consultation with the Association of the German Furniture Industry (VDM) and in agreement with other well-known industry representatives at the international level. "This step is restricted exclusively to imm cologne and its specific requirements for trade fair operations. We are principally planning, as before, to carry out our spring events in 2022. The political guidelines allow for this, and, following the excellent and safe course of the past autumn trade fairs, this must remain our mission in the interests of the participating industries“, says COO Oliver Frese.

The VDM, as the industry sponsor of the event, and against the background of the current pandemic situation, sees the economic success of the event and thus the successful restart of imm cologne in January as extremely endangered. "Following consultation with numerous exhibitors, industry representatives and trading partners, there is either no question of participation on the part of German exhibitors or exhibitors from the German-speaking region, or this is very much in doubt", according to Jan Kurth, CEO of the VDM.  Similar feedback also came from many European countries.

"The current special basic conditions in the interior design industry make the practicability of imm cologne almost impossible", according to Oliver Frese. "We didn't make this very bitter decision easy for ourselves, but consider it to be our obligation to take this step now in close consultation with the industry. In this way we provide clarity and planning security in the interests of our exhibitors. In our shared perspective, an imm cologne with its claim as a leading trade fair for the interior design industry is not realisable in the current situation", the COO continues. "We are currently working actively on options for also still being able to offer exhibitors of imm cologne an attractive trade fair presence at the international level. Here, both spoga+gafa and ORGATEC present excellent alternatives in the interior design portfolio of Koelnmesse".

The cancellation is restricted to imm cologne and expressly does not include other B2B events planned for spring 2022 in Cologne. In autumn, the Cologne art fairs and the nutrition fair Anuga, among others, demonstrated that trade fairs are also once again possible at the international level and can be carried out safely for everyone. It is currently quite clear how differently individual industries are reacting to the present situation. "We have determined a heterogeneous estimation among the exhibiting companies in the face of the enduring pandemic situation in Germany", according to Oliver Frese, COO of Koelnmesse. The assessments vary in degree specific to different industries, "sometimes with a greater impact on the respective trade fair and sometimes hardly palpable", the COO continues. "In the interests of cooperation in a spirit of trust, we are of course communicating closely with our industries and customers, in order to be able to reach just these kinds of industry-specific decisions," according to Frese.

The hygiene and safety concept of Koelnmesse, which remains entirely in keeping with the decisions of the Minister-President Conference and the Corona Protection Ordinance of NRW, stands for safe processes.

A positive picture was still taking shape for imm cologne as a whole with the end of the term for cancellation without penalties in mid-October: with 600 exhibitors from more than 50 countries, the event would still have been the largest and most relevant forum for the interiors industry, hosted in Europe’s biggest furniture market, even in this smaller form in terms of numbers.

The professional exchange and the networking between internationally active companies and highly qualified trade visitors provide the basis at every imm cologne for future-oriented innovations and the development of new business models. In this way, imm cologne ensures important business impulses for the industry. Koelnmesse, together with the VDM and the exhibiting industry, will therefore do everything possible to get a powerful and innovative imm cologne 2023 on its feet.        

Source:

Koelnmesse / imm cologne

JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking © 2021 JEC Group
JEC World 2022
08.12.2021

JEC World 2022: 3 months to go

  • JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking

JEC World, the leading global trade show dedicated to composite materials, their manufacturing technologies and application markets, will take place in Paris from March 8-10, 2022, under the theme Composites for a Sustainable World. JEC World 2022 will be the industry’s most awaited international face to face event after the long pandemic period. Exhibition space is already 98% booked, a clear demonstration of the industry’s commitment to meet and resume business. Those unable to join in person will be able to experience the show via the JEC World Connect digital platform.

  • JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking

JEC World, the leading global trade show dedicated to composite materials, their manufacturing technologies and application markets, will take place in Paris from March 8-10, 2022, under the theme Composites for a Sustainable World. JEC World 2022 will be the industry’s most awaited international face to face event after the long pandemic period. Exhibition space is already 98% booked, a clear demonstration of the industry’s commitment to meet and resume business. Those unable to join in person will be able to experience the show via the JEC World Connect digital platform.

“We are looking forward to welcoming our exhibitors, partners and visitors back to Paris to resume business and promote innovation,” comments Thomas Lepretre, VP Events, Sales and Operations of JEC Group. “JEC World will bring the composites industry together to showcase the sustainability benefits of composite materials to a global audience, and to provide a stimulating meeting-place for the industry to pursue its sustainability ambitions by exchanging knowledge, forging collaborations, and imagining new concepts to protect our environment.”

  • JEC World a unique get-together on sustainability throughout the product lifecycle
  • JEC World a real composites “think tank”
  • JEC World 2022 will demonstrate how sustainable thinking is at the heart of the innovative designs, technologies and business models driving the development of the next generation of composites applications.

Four conferences will be held over the three days, focusing on:

• Sustainability of Raw Materials for Composites: Fueling the Circular Revolution
• Rethinking Composite Materials Production: The Path to Sustainable Manufacturing
• Design for Circular Composite Products: Turning Waste, Recycling & Reuse into Opportunities
• Applications of Composite Materials for Circularity: Towards a Net-Zero World

Innovation is in JEC World’s DNA
One of JEC World’s objective’s is to promote the composites sector’s most innovative projects. More than 600 product launches are expected to be announced over the three days of the show, which will also feature JEC’s high-regarded innovation challenges and awards ceremonies :

• The JEC Composites Innovation Awards celebrate innovative global composite projects, as well as fruitful collaborations between different players in the value chain. Over more than 15 years, the JEC Composites Innovation Awards have highlighted collaborations between some 1,900 companies and recognized 203 creative projects. The winners will be announced on March 7th during a dedicated ceremony and their successful technologies will be on display throughout the show.

• The JEC Composites Startup Booster is the leading startup competition in the world of composites. In 2022, this competition will celebrate its fifth anniversary, with a special event to be organized onsite and the launch of a new “sustainability” award. And, with 20 finalists for 2022, it will recognize innovations with the greatest potential market impact and promote them to an influential audience of decision-makers. The finalists’ innovations will be displayed at JEC World’s “Startup Village.”

• For the first time, JEC World will host the 3rd edition of the SMC BMC Design Award organized by the European Alliance for SMC BMC. This international competition recognizes and promotes design excellence in the use of SMC and BMC materials. The theme of this edition is Sustainable Living, and the award is opento design students and young design professionals (less than 3 years of experience) living in Europe.

Source:

JEC Group