From the Sector

Reset
92 results
B.I.G. Yarns launches EqoCycle Yarns designed for the carpet industry (c) Beaulieu International Group
08.03.2021

B.I.G. Yarns launches EqoCycle Yarns designed for the carpet industry

  • 75% recycled content yarn with no performance compromise
  • A circular, endlessly recyclable solution for contract, automotive and residential carpets
  • Significant resource efficiency in EqoCycle production compared to virgin-based PA6 yarn: 58% reduction in fossil fuel use; 27% less energy consumption; 37% CO₂ emission reduction

B.I.G. Yarns announces its latest development, EqoCycle, a fully recyclable PA6 yarn with 75% recycled content, offering the same high-quality performance of virgin PA6 yarn. The new recycled yarn mainly based on post-industrial waste supports contract, automotive and residential carpet manufacturers with a drop-in circular solution to reduce the ecological footprint of their end products.

  • 75% recycled content yarn with no performance compromise
  • A circular, endlessly recyclable solution for contract, automotive and residential carpets
  • Significant resource efficiency in EqoCycle production compared to virgin-based PA6 yarn: 58% reduction in fossil fuel use; 27% less energy consumption; 37% CO₂ emission reduction

B.I.G. Yarns announces its latest development, EqoCycle, a fully recyclable PA6 yarn with 75% recycled content, offering the same high-quality performance of virgin PA6 yarn. The new recycled yarn mainly based on post-industrial waste supports contract, automotive and residential carpet manufacturers with a drop-in circular solution to reduce the ecological footprint of their end products.

EqoCycle is made with recycled granulates derived from pre-consumer recycled and regenerated PA6, certified by Control Union for Global Recycled Standard (GRS) Certification. The use of less virgin materials implicates a decrease of fossil fuels by 58% and a 27% decrease in energy consumption. On top, EqoCycle yarns allow a reduction of 37% of CO₂ eq./kg compared to the fossil based yarns. The environmental impacts of EqoCycle with 75% recycled content were calculated through an LCA analysis, verified according to ISO 14025 and EN 15804+A1 and published in an Environmental Product Declaration (EPD registration number S-P-02415).

Customers have the assurance that for every 1.000 tons of EqoCycle yarn, 13,562 barrels of oil are saved and 2.700 tons of CO₂ emission are reduced, compared to PA6 traditionally made from virgin materials.

Emmanuel Colchen, General Manager Yarns Division, comments: “EqoCycle is a perfect example of how higher resource efficiency in our industry can promote greater circularity in our customers’ industries. Minimizing waste, re-using materials, and saving energy and carbon emissions in production, it provides our customers and carpet brands with a new sustainable alternative that won’t compromise their end-product performance but will support their increasing focus on CO₂ reduction and global warming potential. All part of our wider commitment to encourage decoupling from the need for only virgin feedstocks and moving towards a circular economy for yarns and soft flooring industries.”

EqoCycle is the latest circular solution in B.I.G. Yarns’ PA6 portfolio, joining EqoBalance PA6, based on biomass balance renewable resources, which offers up to 75% CO₂ reduction. Both exemplify the company’s on-going investment in developing new products that better serve customers’ needs in a sustainable way. B.I.G. Yarns fully pursues opportunities to support and solve the global environmental challenges through innovation, investment and collaboration, as part of its sincere belief in, and broader commitment to, Social Responsibility.

The innovation of EqoCycle and EqoBalance PA6 aligns with the company’s active integration of the UN Sustainable Development Goals (SDGs) into its business activities, creating value for customers and engaging employees and value chain partners.

05.03.2021

ITM Exhibition postponed to 14-18 June 2022

ITM International Textile Machinery Exhibition, which is planned to be held on June 22-26, 2021 postponed to June 14-18, 2022, considering the effects of the ongoing Covid-19 pandemic in the world. This postponement decision was taken as a result of intense discussions and evaluations with participants and sector representatives.

The ITM Organization Team made the following statements: “Our priority is to protect valuable exhibitors and visitors’ investments and all rights, not our commercial earnings. In this regard, we believe that all of our participants will find this compulsory postponement decision taken for the ITM Exhibition justified and will understand.”

ITM 2022, which will be held with partnership of Tüyap Tüm Fuarcılık INC. and Teknik Fuarcılık INC. in cooperation with TEMSAD, will organize at Istanbul Tuyap Fair and Congress Center on June 14-18, 2022.

ITM International Textile Machinery Exhibition, which is planned to be held on June 22-26, 2021 postponed to June 14-18, 2022, considering the effects of the ongoing Covid-19 pandemic in the world. This postponement decision was taken as a result of intense discussions and evaluations with participants and sector representatives.

The ITM Organization Team made the following statements: “Our priority is to protect valuable exhibitors and visitors’ investments and all rights, not our commercial earnings. In this regard, we believe that all of our participants will find this compulsory postponement decision taken for the ITM Exhibition justified and will understand.”

ITM 2022, which will be held with partnership of Tüyap Tüm Fuarcılık INC. and Teknik Fuarcılık INC. in cooperation with TEMSAD, will organize at Istanbul Tuyap Fair and Congress Center on June 14-18, 2022.

OFFICINA+39 reduces use of water with AQUALESS MISSION (c) OFFICINA+39
04.03.2021

OFFICINA+39 reduces use of water with AQUALESS MISSION

A technology to reduce 75% of the water typically used in denim and garment laundry processes, this innovation is evidence of the commitment by Officina+39 to a more sustainable production and planet.

An Italy-based reality with a thirty-year experience on research and chemical application in the textile sector, Officina+39 brings to the table its latest innovation, launched in occasion of Kingpins 24 Flash: the AQUALESS MISSION. It features three products for one innovative process suitable for conventional machines: REMOVER BC, a laser booster, AQUALESS AGED, a waterless compound to give denim abrasion effects and OZ-ONE POWDER, an advanced product to give garments a bleached yet eco-friendly treatment, for a worn and distressed look.

REMOVER BC
This special compound increases laser effect on indigo or dischargeable dyestuff, saving time and energy for a swifter production. Due to the speedy process it also prevents fabric tearing whilst focusing on giving a used look.

A technology to reduce 75% of the water typically used in denim and garment laundry processes, this innovation is evidence of the commitment by Officina+39 to a more sustainable production and planet.

An Italy-based reality with a thirty-year experience on research and chemical application in the textile sector, Officina+39 brings to the table its latest innovation, launched in occasion of Kingpins 24 Flash: the AQUALESS MISSION. It features three products for one innovative process suitable for conventional machines: REMOVER BC, a laser booster, AQUALESS AGED, a waterless compound to give denim abrasion effects and OZ-ONE POWDER, an advanced product to give garments a bleached yet eco-friendly treatment, for a worn and distressed look.

REMOVER BC
This special compound increases laser effect on indigo or dischargeable dyestuff, saving time and energy for a swifter production. Due to the speedy process it also prevents fabric tearing whilst focusing on giving a used look.

AQUALESS AGED
Ideal to give abrasion effects on denim, this waterless treatment has a reduced impact on the environment and can be applied in combination with Oz-One powder both on black and indigo denim.

OZ-ONE POWDER
The sustainable (chlorine and potassium permanganate free) way to give denim that distressed and worn look, with no need of water or high temperatures.

AQUALESS MISSION meets the needs of the industry to reduce water in manufacturing operations, pledging to meet UN’s 2030 SDG 6 of clean water and sanitation, and by doing so protects the planet and its resources.

13.01.2021

The first online World Congress on Textile Coating

  • World Congress on Textile Coating, to take place on 11-12 & 18-19 February 2021.

The conference organisers have developed a well-structured programme of five sessions over four days with live discussion forums following each session for maximum attendee participation.

“The programme aims to be inspiring and informative, and will showcase the best innovations and collaborative actions in the industry. Functionality can be added to textiles and nonwovens at the beginning or the end of the supply chain, with an increasing range of raw materials, offering many options when designing and realizing a high-performance fabric. At the other end, there are many ways, such as applying a coating, to add functionality to an otherwise finished product. For example, the current pandemic has prompted new commercial anti-viral processes and four such presentations will outline the impact on industry and its response to the global pandemic,” says Dr Nick Butler, head of the conference organising committee.

  • World Congress on Textile Coating, to take place on 11-12 & 18-19 February 2021.

The conference organisers have developed a well-structured programme of five sessions over four days with live discussion forums following each session for maximum attendee participation.

“The programme aims to be inspiring and informative, and will showcase the best innovations and collaborative actions in the industry. Functionality can be added to textiles and nonwovens at the beginning or the end of the supply chain, with an increasing range of raw materials, offering many options when designing and realizing a high-performance fabric. At the other end, there are many ways, such as applying a coating, to add functionality to an otherwise finished product. For example, the current pandemic has prompted new commercial anti-viral processes and four such presentations will outline the impact on industry and its response to the global pandemic,” says Dr Nick Butler, head of the conference organising committee.

World Congress on Textile Coating will feature time dedicated to networking, encouraging attendees to interact with conference speakers and industry peers throughout the online programme, offering the opportunity to expand professional networks. All the presentations and discussion forums will be recorded for post-event viewing. Event sponsors imogo AB, Lamberti SpA, JX Nippon ANCI and Weitmann & Konrad GmbH & Co. KG will give individual presentations and host Q&A during the four days of the event.

For the full programme, speakers and abstracts please visit https://www.technical-textiles.online/WCTC.

Source:

AWOL Media

Turkish textile manufacturers wait for ITM 2021 Exhibition (c) ITM
10.12.2020

Turkish textile manufacturers wait for ITM 2021 Exhibition to expand their investments

The Turkish textile industry, which continues its exports and investments without slowing down despite the devastating pandemic, once again proved its strength, especially in this period. ITM 2021 Exhibition, which will be held in Istanbul between 22 and 26 June 2021, will provide a great advantage to companies that desire to expand their investments and introduce their brand new technologies.

The Turkish textile industry, which continues its exports and investments without slowing down despite the devastating pandemic, once again proved its strength, especially in this period. ITM 2021 Exhibition, which will be held in Istanbul between 22 and 26 June 2021, will provide a great advantage to companies that desire to expand their investments and introduce their brand new technologies.

Although there were slowdowns in the textile industry in April and May this year due to the troublesome coronavirus pandemic , the Turkish textile industry succeeded a big breakthrough with the removal of restrictions in June, thanks to both its textile production infrastructure and international exports capacity. The exports of the textile and raw materials sector increased and the companies turned to new investments. While many local companies enlarged their facilities, some of them made new investment decisions. For example, while a giant hygienic and medical fabric production facility was invested in Çorlu, another Turkish company, a global brand in textile machinery production, decided to invest 40 million Turkish Lira. Gaziantep-based spunbond and meltblown nonwoven manufacturer company added two new meltblown lines to its operations. Another company also began to invest in the production of raw materials that they import. This investment activity in Turkey, where is a manufacturing base of European customers whet the appetite of international investors. One of South Korea's largest conglomerates has rolled up its sleeves for an investment of 430 million US Dollars in Çerkezköy. Due to the investments, the purchase of textile machinery increased by 37.1 percent in the first nine months of 2020 amounting to over 1 billion US Dollars.

The Accurate Address for Investment Decisions: ITM 2021 Exhibition
Although the companies took advantage of the pandemic period as an opportunity and continued their investments, many of them are waiting for the ITM 2021 Exhibition for large machinery purchases. ITM 2021 Exhibition, which will be held between 22 and 26 June 2021 at Istanbul Tüyap Fair and Congress Center, will gather thousands of participating companies and visitors under one roof. The company officials, who will have the opportunity to observe the latest technological products to be exhibited by the international and domestic exhibitors, will direct their investments by meeting with the experts of the sector. The machines produced for technical textiles, which became even more important during the devastating pandemic period, will attract the attention of visitors. Thanks to the machinery purchases and business partnerships of both domestic and international companies, there will be great dynamism in the textile industry and the national economy.

Source:

ITM

VDMA-Kreativitätspreis des Deutschen Textilmaschinenbaus 2020 an Nachwuchswissenschaftlerin des ITM der TU Dresden verliehen © ITM/TU Dresden
Frau Dipl.-Ing. Philippa Ruth Christine Böhnke im Technikum Bio- und Medizintextilien des ITM
02.12.2020

VDMA-Kreativitätspreis für ITM Nachwuchswissenschaftlerin

  • VDMA-Kreativitätspreis des Deutschen Textilmaschinenbaus 2020 an Nachwuchswissenschaftlerin des ITM der TU Dresden verliehen

Frau Dipl.-Ing. Philippa Ruth Christine Böhnke vom Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden wurde mit dem 3.000 EUR dotierten Kreativitätspreis des Deutschen Textilmaschinenbaus 2020 für ihre exzellente Studienarbeit „Entwicklung von additiv gefertigten Verbund-Implantaten aus Kieselgelfasern und medizinischen Klebstoffen für die Knochenregeneration“ ausgezeichnet.

Am 02. Dezember 2020 fand die Verleihung der Förder- und Kreativitätspreise 2020 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchswissenschaftler:innen deutscher Universitäten für Spitzenleistungen in Studium und Promotion statt. Die bundesweit ausgeschriebenen Förder- und Kreativitätspreise wurden erstmals online durch Herrn Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, verliehen.

  • VDMA-Kreativitätspreis des Deutschen Textilmaschinenbaus 2020 an Nachwuchswissenschaftlerin des ITM der TU Dresden verliehen

Frau Dipl.-Ing. Philippa Ruth Christine Böhnke vom Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden wurde mit dem 3.000 EUR dotierten Kreativitätspreis des Deutschen Textilmaschinenbaus 2020 für ihre exzellente Studienarbeit „Entwicklung von additiv gefertigten Verbund-Implantaten aus Kieselgelfasern und medizinischen Klebstoffen für die Knochenregeneration“ ausgezeichnet.

Am 02. Dezember 2020 fand die Verleihung der Förder- und Kreativitätspreise 2020 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchswissenschaftler:innen deutscher Universitäten für Spitzenleistungen in Studium und Promotion statt. Die bundesweit ausgeschriebenen Förder- und Kreativitätspreise wurden erstmals online durch Herrn Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, verliehen.

In ihrer Arbeit entwickelte Frau Böhnke ein neuartiges Verbundmaterial mit einer bioaktiven Materialkomposition zur Reparatur und Regeneration von Knochendefekten, bestehend aus einer Faserverstärkung aus biokompatiblen Kieselgelfasern und einem Matrixmaterial auf Basis medizinischer Klebstoffe mit Calcium-, Natrium- und Phosphoranteilen. Die morphologische und mechanische Charakterisierung der gefertigten Strukturen zeigt im Vergleich zu handelsüblichen Knochenersatzmaterialen eine offenporige Struktur und um ein Vielfaches erhöhte Biegesteifigkeiten und Bruchdehnungen. Diese erzielten Materialeigenschaften entsprechen weitestgehend den realen Knochenstrukturen. Frau Böhnke hat mit ihrer herausragenden kreativen wissenschaftlichen Arbeit einen wichtigen maschinenbaulichen Beitrag in den Disziplinen Faserforschung, Additive Fertigung, Faserverbundtechnologien und Medizintechnik geleistet.

Source:

ITM/TU Dresden

Moncler launches Grenoble collection with Dyneema® Composite Fabric (c) DSM Protective Materials
DSM Protective Materials DSMPMPR003b
11.11.2020

Moncler launches Grenoble collection with Dyneema® Composite Fabric

  • Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, today announced that, for the first time, Dyneema® Composite Fabrics are used by Moncler in the Fall/Winter 2020 Grenoble collection, which fuses form and function into high performance skiwear.

Moncler Grenoble is born of a passion for research and implements cutting-edge technology to push the limits of its potential. The design team identified Dyneema® as an innovative fabric it could use to push the level of its performance to the next peak, incorporating the material into the new collection as a departure from the conventional use of cotton and polyester.

  • Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, today announced that, for the first time, Dyneema® Composite Fabrics are used by Moncler in the Fall/Winter 2020 Grenoble collection, which fuses form and function into high performance skiwear.

Moncler Grenoble is born of a passion for research and implements cutting-edge technology to push the limits of its potential. The design team identified Dyneema® as an innovative fabric it could use to push the level of its performance to the next peak, incorporating the material into the new collection as a departure from the conventional use of cotton and polyester.

Sandro Mandrino, the Head of Design for Moncler Grenoble, was the first designer of the luxury fashion brand to incorporate Dyneema® into one of his creations through the Moncler Genius project. The Moncler Genius project advocates radical co-creation where multiple designers create their own signature collections in collaboration with the house. Together, these collections translate into one vision of the future and, as one of the nine designers, Mandrino’s interpretation of the future of fashion features Dyneema® Composite Fabric.

Using variations of the fabric in both white and black allowed Mandrino to bring his vision to life by merging skiwear, space suits and technology all in one. “ 3 Moncler Grenoble is first and foremost about performance,” states Mandrino, who integrated constructive solutions with fabric technology to develop a line that was meant to perform both on and off the ski slopes.

Dyneema®, the world’s strongest and lightest fiber, is 15 times stronger than steel yet light enough to float on water. The unmatched performance and protection of products made with Dyneema® have made it the material of choice in critical applications where failure is not an option for more than 30 years. In fabric form, Dyneema® is available in composites, denim, knits, wovens and hybrids for composite reinforcements. And because Dyneema® fabrics are made using Dyneema® fiber, they intrinsically provide high strength, low weight, waterproof and breathable properties – allowing designers to fuse the technical performance of ultra-light products with aesthetic design that doesn’t sacrifice strength or durability.

The Moncler team used the Grenoble collection as an opportunity to experiment and further understand the nature and behavior of Dyneema® fabrics, while simultaneously incorporating material performance with practical design. “Future collections will focus on expanding to new designs and fabric options in collaboration with DSM,” adds Mandrino.

“We are very excited to be working with the Moncler team to launch a collection of wonderful garments that allow people to explore the outdoors more safely and for longer periods of time,” states Marcio Manique, Global Business Director, Consumer & Professional Protection, DSM Protective Materials. “We look forward to further supporting Moncler as they develop innovative, high-tech garments that are also sustainably sourced through the introduction of bio-based Dyneema® fabrics.”

In line with DSM’s commitment to protect people and the environment they live in, the world’s first-ever bio-based ultra-high molecular weight polyethylene fiber was introduced in May 2020. Bio-based Dyneema® boasts the same exact performance as conventional Dyneema® with a carbon footprint that is 90 percent lower than generic HMPE. DSM and Moncler’s continued partnership will not only provide high performance, light weight garments for outdoor enthusiasts but also environmentally sustainable alternatives that contribute to a more circular economy.

Gewebte integral gefertigte Implantate für das Herz-Kreislaufsystem © ITM/TU Dresden. Gewebte integral gefertigte Implantate für das Herz-Kreislaufsystem.
12.10.2020

ITM-Wissenschaftler für Otto von Guericke-Preis der AiF 2020 nominiert

  • Maßgeschneiderte integral gefertigte Implantate mittels einer neuartigen Webtechnologie

Das Wissenschaftler-Team Ronny Brünler und Phillip Schegner vom Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden wurde für ihre Entwicklungen, die maßgeblich in dem IGF-Forschungsvorhaben 19922 BR umgesetzt worden sind, für den diesjährigen Otto von Guericke-Preis der AiF nominiert.

Prof. Chokri Cherif, Institutsdirektor des ITM freut sich mit seinem Team sehr über die kontinuierlichen Forschungserfolge, die am ITM in zahlreichen interdisziplinären und branchenübergreifenden Forschungsvorhaben für insbesondere biomedizinische Anwendungen erzielt werden. „Nachdem wir bereits 2015 mit dem Otto von Guericke-Preis ausgezeichnet worden sind, ist die erneute Nominierung für diesen hochkarätigen Preis eine besondere Würdigung und gleichzeitig auch weiterer Ansporn für die Umsetzung unserer Forschungsergebnisse in die Industrie.“

  • Maßgeschneiderte integral gefertigte Implantate mittels einer neuartigen Webtechnologie

Das Wissenschaftler-Team Ronny Brünler und Phillip Schegner vom Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden wurde für ihre Entwicklungen, die maßgeblich in dem IGF-Forschungsvorhaben 19922 BR umgesetzt worden sind, für den diesjährigen Otto von Guericke-Preis der AiF nominiert.

Prof. Chokri Cherif, Institutsdirektor des ITM freut sich mit seinem Team sehr über die kontinuierlichen Forschungserfolge, die am ITM in zahlreichen interdisziplinären und branchenübergreifenden Forschungsvorhaben für insbesondere biomedizinische Anwendungen erzielt werden. „Nachdem wir bereits 2015 mit dem Otto von Guericke-Preis ausgezeichnet worden sind, ist die erneute Nominierung für diesen hochkarätigen Preis eine besondere Würdigung und gleichzeitig auch weiterer Ansporn für die Umsetzung unserer Forschungsergebnisse in die Industrie.“

In dem nominierten IGF-Forschungsvorhaben wurde die Entwicklung neuartiger textiler Herzklappenprothesen, die exakt an die anatomische Form angepasst und minimalinvasiv im Herz platzierbar sind, exzellent umgesetzt.

Für die Behandlung defekter Herzklappen stehen mechanische und biologische Klappen zur Verfügung. Die neuartigen gewebten Herzklappenprothesen sollen die Vorteile der beiden Herzklappentypen vereinen: unbegrenzte Lebensdauer, keine lebenslangen Einnahmen von Antikoagulationsmedikamenten und minimal invasive Operation. Ferner können die textilen Herzklappen zeit- und kostensparend mit hoher Reproduzierbarkeit und Qualität gefertigt werden. Mit Computertomographie-Daten wird ein 3D-Modell generiert, das in mehreren Schritten weiterentwickelt und als maschinenlesbarer Code in eine konventionelle Webmaschine übertragen wird. Somit wird eine reproduzierbare, kostengünstige Herstellung von neuartigen textilen, nahtlosen Schlauchstrukturen mit definierter Ventilfunktion mit gleichzeitig hoher Produktsicherheit realisiert.

Das überzeugte die Jury des Wissenschaftlichen Rates der Arbeitsgemeinschaft industrieller Forschungsvereinigungen (AiF), die das erfolgreiche Projekt in die Finalrunde um das "IGF-Projekt des Jahres 2020" wählte.

Das IGF-Vorhaben 19922 BR der Forschungsvereinigung Forschungskuratorium Textil e.V. wurde über die AiF im Rahmen des Programms zur Förderung der industriellen Gemeinschaftsforschung und -entwicklung (IGF) vom Bundesministerium für Wirtschaft und Energie aufgrund eines Beschlusses des Deutschen Bundestages gefördert.

 

 

More information:
ITM Herzklappenersatz
Source:

ITM / TU Dresden

(c) Tonello
12.10.2020

Tonello at DenimsandJeans Virtual Show

“When it comes to working on new developments, we always start from new ideas and the constant research that starts from a concept that becomes reality, by increasingly raising the bar of sustainability” said Alice Tonello, R&D and Marketing Director of Tonello. “The research for technologies and solutions have always been part of our DNA, is a daily commitment to the environment, the market, our people and all human beings with their needs.  Based on this vision, two revolutionary patent-pending process, are born, Wake and OBleach, that allow to create incredible and totally responsible effects on garments” continued Alice Tonello.

This is how The Laundry (R)Evolution was born: a radically new conception thought to simplify and optimize the entire garment finishing process.

It involves only 2 technologies in the entire finishing cycle, reducing waste and optimizing resources: LaserBlaze, and The All-in-One-System. Metro is used, a software that processes real data, in real time to check all laundry consumption, optimizing processing times and improving performance.

“When it comes to working on new developments, we always start from new ideas and the constant research that starts from a concept that becomes reality, by increasingly raising the bar of sustainability” said Alice Tonello, R&D and Marketing Director of Tonello. “The research for technologies and solutions have always been part of our DNA, is a daily commitment to the environment, the market, our people and all human beings with their needs.  Based on this vision, two revolutionary patent-pending process, are born, Wake and OBleach, that allow to create incredible and totally responsible effects on garments” continued Alice Tonello.

This is how The Laundry (R)Evolution was born: a radically new conception thought to simplify and optimize the entire garment finishing process.

It involves only 2 technologies in the entire finishing cycle, reducing waste and optimizing resources: LaserBlaze, and The All-in-One-System. Metro is used, a software that processes real data, in real time to check all laundry consumption, optimizing processing times and improving performance.

The All-in-One System performs all washing operations by integrating 4 sustainable technologies into a single machine: ECOfree 2, which uses ozone in both the water and air; NoStone® for authentic and pumice-free stone-wash effects; UP, for washing processes with at least 50% less water; Core, a nebulizing system improving performance and reducing water consumption.

In terms of effects, the latest results of the Laundry (R)evolution are OBleach and Wake.

OBleach is the new Tonello patent-pending process which, by using only ozone, “returns to the future” with an authentic, sustainable and cool Bleach.

Wake is the first totally natural dyeing system. In fact, it uses only plants and vegetable waste, organic items like flowers, berries and roots left to dry and infuse, without harmful chemicals additives.

Tonello will be live during DenimsandJeans Virtual Show on October 14th and 15th.

Source:

EFFE-BI SRL PR & COMMUNICATION

VacuFil (c) Oerlikon
24.09.2020

Recycling becomes a focus

Mountains of waste, plastic-infested oceans, negative CO2 footprints – the need for more sustainable ways of living has never been more urgent. Consequently, it is logical that recycling solutions are becoming increasingly important within the textile industry. This was also tapped into at the first virtual Global Fiber Congress in Dornbirn with a session that focused specifically on the topic. In front of around 400 participants, Markus Reichwein, Head of Product Management at Oerlikon Barmag, also spoke about solutions currently on the market.

As one of only manufactureres, the Oerlikon Group’s Manmade Fibers segment offers the entire mechanical recycling chain –from preparing the recycled materials, producing the melt all the way through to the textured package. Here, the company utilizes the VacuFil solution supplied by its subsidiary Barmag Brückner Engineering (BBE) –which, in addition to mastering bottle-to-bottle and bottle-to-textile processes, is also able to process textile waste into chips. This permits the running of textile production operations very much in line with the zero-waste philosophy.

Mountains of waste, plastic-infested oceans, negative CO2 footprints – the need for more sustainable ways of living has never been more urgent. Consequently, it is logical that recycling solutions are becoming increasingly important within the textile industry. This was also tapped into at the first virtual Global Fiber Congress in Dornbirn with a session that focused specifically on the topic. In front of around 400 participants, Markus Reichwein, Head of Product Management at Oerlikon Barmag, also spoke about solutions currently on the market.

As one of only manufactureres, the Oerlikon Group’s Manmade Fibers segment offers the entire mechanical recycling chain –from preparing the recycled materials, producing the melt all the way through to the textured package. Here, the company utilizes the VacuFil solution supplied by its subsidiary Barmag Brückner Engineering (BBE) –which, in addition to mastering bottle-to-bottle and bottle-to-textile processes, is also able to process textile waste into chips. This permits the running of textile production operations very much in line with the zero-waste philosophy.

VacuFil ensures a stable process in the case of recycled quality yarns
The reliable removal of contaminants is vital for a stable and efficient spinning process and outstanding yarn quality. At the same time, stable operating conditions with minimal fluctuations are essential. The greatest challenge here is the differing qualities of the bottle flakes fed into the system, as the extrusion process is barely able to balance these fluctuations. Here, the VacuFil concept counters with blending silos, which reduce the differences in the viscosity of the polymers considerably and guarantee high yarn and fabric quality.

The VacuFil concept is installed upstream to an Oerlikon Barmag POY system, which transforms the recycled melt into filament yarn of the accustomed high quality. As texturing solutions, Oerlikon Barmag offers its state-of-the-art automatic eAFK-series systems, including the latest generation of the eAFK Evo, which was unveiled at the ITMA Barcelona last year. Yarn manufacturers wishing to continue texturing manually can use the eFK series.

With the VarioFil R+, producers of smaller batches now also have a compact system with an integrated recycled materials preparation unit at their disposal. The system offers a special extrusion system for bottle flake materials, the very latest metering and mixing technology for spin-dying and expanded 2-stage melt filtration. The four spinning positions are each equipped with an Oerlikon Barmag 10-end WINGS POY winder.

While mechanical recycling has already been extensively developed, chemical recycling for mixed fabrics is still presenting the textile industry with huge challenges. The Oerlikon Group’s Manmade Fibers segment is currently working on solutions and concepts for transforming these fabrics into new textiles.

 

More information:
Oerlikon Sustainability Yarns
Source:

Oerlikon

New Monfortex line part of a long-term vision for Kettelhack (c) Monforts
The Monfortex sanforizing line with integrated Qualitex 800 control has now been operational at Kettelhack’s plant in Rheine, Westphalia, for a number of months.
24.08.2020

New Monfortex line part of a long-term vision for Kettelhack

  • Kettelhack GmbH – a German leader in the dyeing and finishing of monochrome fabrics for high-quality and durable workwear and bed linen – has this year retired its existing Monforts sanforizing line after 35 years of daily service, replacing it with a new one.

The first line was installed in 1985 during a decisive time for the company.

Taking the helm in the early 1980s, Jan Kettelhack – the current CEO, owner and great grandson of Heinrich Kettelhack who founded the company back in 1874 – made a number of decisions that have secured its success over the following decades.

In 1982 Kettelhack had to vacate its existing plant in the city of Rheine due to urban development restrictions and despite a general sense of crisis in the European textile industry at that time, opted to relocate and build a new highly automated plant that was not reliant on mechanical and personnel-intensive processes. This was aligned with a greater focus on competitive international sales.

  • Kettelhack GmbH – a German leader in the dyeing and finishing of monochrome fabrics for high-quality and durable workwear and bed linen – has this year retired its existing Monforts sanforizing line after 35 years of daily service, replacing it with a new one.

The first line was installed in 1985 during a decisive time for the company.

Taking the helm in the early 1980s, Jan Kettelhack – the current CEO, owner and great grandson of Heinrich Kettelhack who founded the company back in 1874 – made a number of decisions that have secured its success over the following decades.

In 1982 Kettelhack had to vacate its existing plant in the city of Rheine due to urban development restrictions and despite a general sense of crisis in the European textile industry at that time, opted to relocate and build a new highly automated plant that was not reliant on mechanical and personnel-intensive processes. This was aligned with a greater focus on competitive international sales.

From 1986, the company’s proficiency as a specialist in solid-colour textiles led to workwear textiles becoming a bedrock of the business. Continuous investments in machinery and technical equipment have resulted in a fully integrated and rationalised single source site dedicated solely to what the company does best – the expert dyeing and finishing of textiles.

Crucial process steps

These stages in the textile value-added chain, Jan Kettelhack has observed, are crucial to the quality of a final product in workwear – whether it stands the test in everyday use, how comfortable it is, and how many washes it can withstand.

Central to this is the sanforizing process, which pre-shrinks a fabric by compressing it prior to washing. This limits any residual or further shrinkage in a made-up finished garment to less than 1%, to ensure perfect comfort and fit over an extended lifetime.

“We certainly can’t complain about the performance of the old Monfortex sanforizing line which gave us so many uninterrupted years of service, but certain spare parts for it were becoming increasingly hard to source, the control unit was becoming a little unstable and we couldn’t risk potential interruptions to our production schedule,” says Kettelhack plant manager Hendrik Pleimann. “In many ways, the new Monfortex sanforizer is much the same as the old one in terms of its mechanical reliability and robust construction, but of course today’s drives are much more efficient, and when it comes to the automation features and control units – and the data we can generate and analyse for increasing efficiency – that’s a whole new world.”

Qualitex 800

The two-metres-wide Monfortex line benefits from the latest Qualitex 800 control system which allows all parameters to be easily automated via the 24-inch colour touchscreen, including production speed, control of all fabric feed devices, rotation spray or steaming cylinder options, the width of the stretching field and the rubber belt pressure.

The integrated Compactomat system allows a continuous indication and control of the shrinkage values and the temperatures of the shrinking cylinder and felt calender. Up to 10,000 separate process parameter records can be generated and stored by the data manager.

Full line management can be optimised via the batch-specific calculation of all process material consumption and water and electricity use, with any standstill times analysed and immediately corrected for the future.

Any further assistance required is available via Monforts Teleservice, with direct connection to technicians and virtual access to machine analysis.

Professional

Commissioning of the new Monfortex line at Kettelhack commenced in January and it was fully operational in a relatively short time.

“This was a very professional installation provided by the Monforts team with whom we have a very good relationship dating back many years, and everyone knew what was required from both sides,” says Mr Pleimann. “Our operators have found the new line very user friendly and we are very pleased with how everything proceeded so smoothly. An unexpected benefit is that the new line is also a lot quieter, of course, which is something our operatives are appreciating.”

Key features of the Monfortex line are the proven fabric preparation, weft straightening and spreading units, prior to the compressive shrinkage machine with a 750mm shrinking cylinder, and a felt calender equipped with 2,000mm diameter drying cylinder. The line also features an integrated automatic grinding unit.

Customer service

Kettelhack is processing primarily cotton and polyester woven fabrics, with lyocell becoming increasingly popular in workwear for its softness and comfort.

As part of its customer service, the company stocks more than a million metres of grey fabric and at least 1.2 million metres of finished and rolled standard fabric in its warehouse at any one time, with a further 750,000 metres permanently in production.

While a significant cost, this commitment ensures Kettelhack customers can be fully flexible and rely on it as a partner.

“As a family-run company with around a hundred employees, Kettelhack operates very differently to bigger businesses which have to constantly consider their immediate quarterly profits,” Mr Pleimann concludes. “The thinking at Kettelhack is in terms of the next twenty years and ensuring that the business will be just as successful for the next generation as it is today. We also have a very flat organisational structure in which everyone is involved and takes an active part, which makes it a very nice place to work.”

Source:

On behalf of A. Monforts Textilmaschinen GmbH & Co. KG by AWOL Media.

ECOSENSOR™ by Asahi Kasei launches its new fabric collection imbued with the brand’s sustainable story-making © GB Network
ECOSENSOR™ 100% recycled polyamide fabrics
06.08.2020

ECOSENSOR™ by Asahi Kasei launches its new fabric collection imbued with the brand’s sustainable story-making

  • ECOSENSOR™’s new references combine high-performance and innovation to empower people with the possibility to live life naturally both for mind and body.
  • The new range is woven from certified ingredients, a completely traceable production process and highly certified suppliers               

"A New Eco high-tech force of Nature", a bold claim, a daring attitude and true facts. ECOSENSOR™ by Asahi Kasei has concentrated all its key values into a Nature-driven and high-tech fabric collection that respects the environment and human being.

Sustainability, active climate control, exquisite touch and extreme performance co-habit the textiles: the collection is made of wovens and knits where the main technology is represented by GRS - Global Recycle Standard certified polyamide and polyesters, sometime combined with ROICA™ recycled stretch yarns and dyed and finished with Oekotex Standard 100 certified processes and/or by BlueSign® partners’ companies.

But there is much more than it meets the eye.

Behind the new collection is a great story of sustainability.

  • ECOSENSOR™’s new references combine high-performance and innovation to empower people with the possibility to live life naturally both for mind and body.
  • The new range is woven from certified ingredients, a completely traceable production process and highly certified suppliers               

"A New Eco high-tech force of Nature", a bold claim, a daring attitude and true facts. ECOSENSOR™ by Asahi Kasei has concentrated all its key values into a Nature-driven and high-tech fabric collection that respects the environment and human being.

Sustainability, active climate control, exquisite touch and extreme performance co-habit the textiles: the collection is made of wovens and knits where the main technology is represented by GRS - Global Recycle Standard certified polyamide and polyesters, sometime combined with ROICA™ recycled stretch yarns and dyed and finished with Oekotex Standard 100 certified processes and/or by BlueSign® partners’ companies.

But there is much more than it meets the eye.

Behind the new collection is a great story of sustainability.

"Our international team strives to innovate with a human-based approach to research and develop solutions that meet high-performance standards as well as the transparency and traceability of both the ingredients and the supply chain", says Mr. Hashimoto, Senior Managing Director of Asahi Kasei Advance, the global materials innovator and manufacturer.

Indeed, the company has set the high bar all its suppliers and partners must match. Such criteria include: thoroughly transparency and traceability of both materials and production, corporate responsibility at all levels and a strategic commitment granted by influential certifications such as GRS - Global Recycle Standard for recycled ingredients and processes, as well as Bluesign® and OekoTex Standard 100 certifications, which focus on environmentally-friendly impact of the dyeing and finishing processes.

The human, environmentally-friendly and cutting-edge imprint of ECOSENSOR™ ultimate collection reflects a vision for a more responsible way of fabric manufacturing.

A new force of nature, because story telling truly must match the story making.

Sustainable leadership for GtA with new Monforts Montex wide width lines (c) AWOL Media
GtA Managing Director Andreas Niess
27.07.2020

Sustainable leadership for GtA with new Monforts Montex wide width lines

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

Source:

AWOL Media for A. Monforts Textilmaschinen GmbH & Co. KG

Rieter Holding Ltd.
Rieter Holding Ltd.
03.02.2020

Rieter signed additional contracts at the Swiss-Egyptian Investment Forum

At the Swiss-Egyptian Investment Forum which took place on February 3 in Cairo (Egypt), the Cotton & Textiles Holding Company and Rieter signed additional contracts related to the modernization program for the Egyptian textile industry.

Further Orders from Egypt:

  • Contracts for additional projects signed in Cairo
  • Order volume is around 30 million Swiss francs
  • Order intake in the first half year of 2020 expected

The total volume of the contracts sums up to around 210 million Swiss Francs, including the contracts which had been signed at ITMA 2019 in Barcelona and which represent a volume of around 180 million Swiss Francs.

Rieter expects the full amount of orders to be booked as order intake in the first half year of 2020. So far, 165 million Swiss Francs have been booked.

 

At the Swiss-Egyptian Investment Forum which took place on February 3 in Cairo (Egypt), the Cotton & Textiles Holding Company and Rieter signed additional contracts related to the modernization program for the Egyptian textile industry.

Further Orders from Egypt:

  • Contracts for additional projects signed in Cairo
  • Order volume is around 30 million Swiss francs
  • Order intake in the first half year of 2020 expected

The total volume of the contracts sums up to around 210 million Swiss Francs, including the contracts which had been signed at ITMA 2019 in Barcelona and which represent a volume of around 180 million Swiss Francs.

Rieter expects the full amount of orders to be booked as order intake in the first half year of 2020. So far, 165 million Swiss Francs have been booked.

 

Source:

Rieter Holding Ltd.

CAALOSS2020collection with Bemberg™lining CAALOSS2020 collection withBemberg™lining
CAALOSS2020 collection with Bemberg™lining
29.01.2020

Bemberg™ doubles its presence at Première Vision

Bemberg™ gears up for Première Vision - February 11th-13th, Paris, France; with a great deal of novelties and a key statement on sustainability: Let’s Make it Circular! That’s why the Japanese brand of regenerated cellulose fibers joins the fair with two booths, one in the yarn-focused sector – Hall 6 C52 6D53 – the other one in the Smart Creation area, the curated district showcasing cutting-edge sustainable innovation for the textile and fashion business. Hall3 S14.

“We simply could not miss out on the Smart Creation Area as sustainability is the founding pillar of our company,” says SHUNSUKE SATO, sales manager of Bemberg™ by Asahi Kasei. “Indeed, the smart fiber is made from a cotton linter which is pre-consumer material, a natural derived source, that doesn’t deplete forestry resources. The strategy beyond our double presence is to highlight our deep commitment to responsible innovation to a larger target of professionals.”

Bemberg™ gears up for Première Vision - February 11th-13th, Paris, France; with a great deal of novelties and a key statement on sustainability: Let’s Make it Circular! That’s why the Japanese brand of regenerated cellulose fibers joins the fair with two booths, one in the yarn-focused sector – Hall 6 C52 6D53 – the other one in the Smart Creation area, the curated district showcasing cutting-edge sustainable innovation for the textile and fashion business. Hall3 S14.

“We simply could not miss out on the Smart Creation Area as sustainability is the founding pillar of our company,” says SHUNSUKE SATO, sales manager of Bemberg™ by Asahi Kasei. “Indeed, the smart fiber is made from a cotton linter which is pre-consumer material, a natural derived source, that doesn’t deplete forestry resources. The strategy beyond our double presence is to highlight our deep commitment to responsible innovation to a larger target of professionals.”

Let’s take it circular! is the motto at the Smart Creation booth. The lifespan of Bemberg™’s regenerated cellulose fiber derived from cotton is fully circular: from the source to manufacturing. The whole sustainable closed-loop process is supported by the LCA study, signed by ICEA and validated by Paolo Masoni. Recyclability is granted by the Global Recycle Standard - GRS certification by the renown Textile Exchange. An influential guarantee that involves the whole production process and supply chain behind the company’s smart yarns. Bemberg™ yarns are entirely biodegradable and ecotoxicity-free – meaning that at the end of their life circle they break down into the environment leaving no trace in terms of toxic substances as attested by the Innovhub-SSI report.

On show at Première Vision some of the most recent collaborations with GRS-certified partners such as FIVEOL, SMI TESSUTI, TESSITURA UBOLDI, INFINITY, SIDONIOS, MATIAS & ARAUJO, TINTEX, IPEKER, EKOTEN, for fashion fabrics as well as PEZZETTI and BRUNELLO & G.CRESPI from lining partners.

The first Bemberg™ partner to present a commercial collection enriched by Velutine™ Evo is the Portuguese Matias & Araújo. With an innovative spirit, dynamism and a determined entrepreneurial spirit, the company is a leading knitwear producer for the textile industry.

In the Hall 6 Bemberg™ displays key commercial items developed by premium brands such as CAALO that is making its mark in the outerwear market with its Sustainably produced Functional-Luxury proposal. For SS20, CAALO utilized Bemberg™ lining because of the sustainability properties and it's unique colour.

CAALO looks to utilize as much eco-friendly and sustainable materials as possible without compromising on design or quality. This Bemberg™ lining was a perfect fit.

Source:

(c) GB Network

MANTECO Logo NEW GENERATION RECYCLED WOOL by MANTECO
MANTECO Logo
29.01.2020

Manteco presents The Manteco System

The integrated sustainable network making fashion circular, Made in Italy and 100% traceable

World leading textile manufacturer Manteco presents its sustainable path for a better future: The Manteco System. A strategy and a vision shaping the company’s sustainable imprint since 1943. The system consists in the development and engineering of a production network involving 100 partner-companies from the whole supply chain “We all team up responsibly to create premium collection based on transparent , traceable  circular economy practices,” comments Matteo Mantellassi, co-CEO of Manteco.
 
To achieve meeting the demand for fair and sustainable fashion that consumers believe in, and is expected  from our clients, the company and its partners have created and accomplished to a Protocol of Sustainable Values and Commitments in line with the highest standards of the global market.

The integrated sustainable network making fashion circular, Made in Italy and 100% traceable

World leading textile manufacturer Manteco presents its sustainable path for a better future: The Manteco System. A strategy and a vision shaping the company’s sustainable imprint since 1943. The system consists in the development and engineering of a production network involving 100 partner-companies from the whole supply chain “We all team up responsibly to create premium collection based on transparent , traceable  circular economy practices,” comments Matteo Mantellassi, co-CEO of Manteco.
 
To achieve meeting the demand for fair and sustainable fashion that consumers believe in, and is expected  from our clients, the company and its partners have created and accomplished to a Protocol of Sustainable Values and Commitments in line with the highest standards of the global market.

“On a hand, the protocol preserves the unique ‘genius loci’ of our territory – it respects the heritage of all our partners, from the smaller businesses to the more structured ones - on the other hand, it works like a shared compass of sustainable values, allowing the whole supply chain behind Manteco products to stand out and be competitive on the global stage” adds Mantellassi.
 
The protocol and its monitored and traceable system cover virtuous management of resources – e.g. Water, energy and chemical products - waste management and low production impact on the environment but also responsible standards in terms of employment, quality of the working environment, equal rights and anti-discrimination policies.

One of the key  results of such commitment and sustainable development is the creation of an upgraded version of the recycled wool  MWool™: a top ingredient made from premium recycled wool process guaranteed by the Manteco System.The System works like a symphony where management, measurement and controls  are not there just to test  the quality of each single phase of processes or  products , but to make sure and offer the complete traceability of Manteco production.  From raw material, to yarn, spinning, finishing, testing and final fabric.

Some productions tips about Manteco:

  •  5.3 million kg of raw materials processed annually.
  •  6.860 tests on raw material per year.
  •  34.400 tests on finished products.
  •  100% made in Italy system completely based in the Prato district since 1943.
  •  Total transparency and traceability thanks to a highly skilled management system.

With a turnover of over 91m Euro in 2019 and an annual growth of 17,80% since 2012, Manteco SpA is the 4th textile company in Italy, listed in the TOP30 companies of the Italian fashion system. “The unique Manteco system adds value to our products while highlighting the sustainable path we share with all our partners both upstream and downstream”.

More information:
Manteco
Source:

(c) GB Network

ISKO takes the fashion world by storm with ISKO Wild™ ISKO takes the fashion world by storm with ISKO Wild™
ISKO takes the fashion world by storm with ISKO Wild™
23.01.2020

ISKO takes the fashion world by storm with ISKO Wild™

All the glamour of fur meets the technology of responsible ISKO™ denim, for a first-of-its-kind concept that provides fashionable and conscious alternatives to furs and other synthetic imitations.

Over the years, ISKO has set out on a journey of innovative firsts consistently providing what the market had been missing. ISKO Wild™, the latest achievement of this long-lasting enterprise and the first-in-the-world denim fur program, is set to impress the industry and revolutionize fashion.

Resulting from ISKO’s Responsible Innovation™ approach based on creativity, competence, and citizenship, ISKO Wild™ reflects the company’s commitment to making both the world and the industry better. This technology does not harm animals nor does it destroy their home. Unlike other imitation furs, it does not release micro plastics into the environment.

All the glamour of fur meets the technology of responsible ISKO™ denim, for a first-of-its-kind concept that provides fashionable and conscious alternatives to furs and other synthetic imitations.

Over the years, ISKO has set out on a journey of innovative firsts consistently providing what the market had been missing. ISKO Wild™, the latest achievement of this long-lasting enterprise and the first-in-the-world denim fur program, is set to impress the industry and revolutionize fashion.

Resulting from ISKO’s Responsible Innovation™ approach based on creativity, competence, and citizenship, ISKO Wild™ reflects the company’s commitment to making both the world and the industry better. This technology does not harm animals nor does it destroy their home. Unlike other imitation furs, it does not release micro plastics into the environment.

With the claim to inspire and delight the fashion world, stakes are high but the concept is a real hit for it represents the perfect combination of glamorous fashion and conscious responsibility.
Despite attempts of imitations ISKO Wild™ is a one-of-a-kind concept in the industry. Available in both Indigo and RFD, featuring cotton and cotton wool blends, this product stands out from a quality, look and performance standpoint.

More information:
Isko
Source:

(c) menabo Evolutionary Branding

(c) Oerlikon
16.01.2020

Domotex 2020: Manmade Fibers shows BCF S8 with new CPC-T

Market leader Oerlikon Neumag has its finger firmly on the pulse of their customers with the new Color Pop Compacting unit (CPC-T) for the BCF S8 carpet yarn plant, which is now available for the Polyamide 6 process. The new solution, which was on show from 10-13 January 2020 at the Domotex 2020 in Hannover, attracted great interest from many trade visitors.

Following the trend for multicolored carpets, BCF S8 sets new standards in regards to color separation. The plant, launched as a tricolor solution at last year’s ITMA in Barcelona, makes anything possible – from mélange to strongly separated. It promises carpet yarn producers even more flexible color mixing variants for product differentiation. The core component in this process, the Color Pop Compacting unit (CPC-T), offers more than 200,000 different color shades from three colors. The innovation, which has been filed for patent, is available for polypropylene and polyester polymers as well as for the polyamide 6 process.

Market leader Oerlikon Neumag has its finger firmly on the pulse of their customers with the new Color Pop Compacting unit (CPC-T) for the BCF S8 carpet yarn plant, which is now available for the Polyamide 6 process. The new solution, which was on show from 10-13 January 2020 at the Domotex 2020 in Hannover, attracted great interest from many trade visitors.

Following the trend for multicolored carpets, BCF S8 sets new standards in regards to color separation. The plant, launched as a tricolor solution at last year’s ITMA in Barcelona, makes anything possible – from mélange to strongly separated. It promises carpet yarn producers even more flexible color mixing variants for product differentiation. The core component in this process, the Color Pop Compacting unit (CPC-T), offers more than 200,000 different color shades from three colors. The innovation, which has been filed for patent, is available for polypropylene and polyester polymers as well as for the polyamide 6 process.

Polyester, recycling polyester and fine titers are on trend
During numerous conversations with customers, Martin Rademacher, Head of Sales Oerlikon Neumag, observed a noticeable trend for polyester in the carpet industry even outside the USA. Sustainable solutions are equally sought after: “Our customers increasingly demand plants that can process recycled polyester,” explains Martin Rademacher.

The Manmade Fibers segment presented an additional solution by Oerlikon Barmag for polyester applications that need fine single filament titers from 0.5 dpf and high filament counts: Puffy, soft polyester filament yarns with BCF-similiar properties are produced on the basis of a POY and texturing process. Core components of the processes are the POY take-up unit WINGS HD as well as the new texturing machine eAFK Big-V.

(c) Saurer AG
15.10.2019

Saurer: Presenting Autoairo in Asia for the first time at 2nd CIIE

Originating in Switzerland and founded in 1853, Saurer is a leading globally operating technology group focusing on machinery and components for yarn processing. After having participated in the first CIIE last year, Saurer will once again take part in this important event this year, presenting its new air-spinning machine Autoairo, which the company launched at ITMA Barcelona on 20 June 2019. At the CIIE in November, the Autoairo will be exhibited in Asia for the first time.

Autoairo has set new benchmarks for air spinning. Saurer has combined its most advanced automation solutions with proven technology to create an air-spinning machine with unique properties. The Autoairo features autonomous spinning positions with individual drives and integrated intelligence. Its digital piecing unit is capable of performing up to 24 piecing processes simultaneously. As a result, the machine’s run-up time is also reduced by at least 30%. The Autoairo’s compact, double-sided design means that it takes up 40% less space than single-sided machines. These features give the Autoairo a powerful productivity advantage, while at the same time lowering spinning costs.

Originating in Switzerland and founded in 1853, Saurer is a leading globally operating technology group focusing on machinery and components for yarn processing. After having participated in the first CIIE last year, Saurer will once again take part in this important event this year, presenting its new air-spinning machine Autoairo, which the company launched at ITMA Barcelona on 20 June 2019. At the CIIE in November, the Autoairo will be exhibited in Asia for the first time.

Autoairo has set new benchmarks for air spinning. Saurer has combined its most advanced automation solutions with proven technology to create an air-spinning machine with unique properties. The Autoairo features autonomous spinning positions with individual drives and integrated intelligence. Its digital piecing unit is capable of performing up to 24 piecing processes simultaneously. As a result, the machine’s run-up time is also reduced by at least 30%. The Autoairo’s compact, double-sided design means that it takes up 40% less space than single-sided machines. These features give the Autoairo a powerful productivity advantage, while at the same time lowering spinning costs.

Source:

Saurer AG

Foto: ITM, TU Dresden, Mirko Krizwon
11.09.2019

Entwicklung der Technischen Universitäten Dresden und Clausthal mit dem AVK Innovationspreis 2019 geehrt

Gemeinsame Entwicklung von Textil- und Kunststofftechnikern aus den Technischen Universitäten Dresden und Clausthal mit dem AVK Innovationspreis 2019 in der Kategorie „Forschung/Wissenschaft“ geehrt

Am 10. September 2019 wurden im Rahmen der Composite Europe 2019 in Stuttgart die AVK-Innovationspreise 2019 verliehen. Wissenschaftlerinnen und Wissenschaftler des Institutes für Polymerwerkstoffe und Kunststofftechnik (PuK) der TU Claustahl und des Institutes für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden erhielten für ihre gemeinsame „Entwicklung eines simulationsgestützten Verfahrens zur schnellen Imprägnierung großer und komplexer Strukturen auf Basis neuartiger textiler Halbzeuge mit integrierten temporären Strömungskanälen“ den AVK-Preis in der Kategorie „Forschung/Wissenschaft“.

Gemeinsame Entwicklung von Textil- und Kunststofftechnikern aus den Technischen Universitäten Dresden und Clausthal mit dem AVK Innovationspreis 2019 in der Kategorie „Forschung/Wissenschaft“ geehrt

Am 10. September 2019 wurden im Rahmen der Composite Europe 2019 in Stuttgart die AVK-Innovationspreise 2019 verliehen. Wissenschaftlerinnen und Wissenschaftler des Institutes für Polymerwerkstoffe und Kunststofftechnik (PuK) der TU Claustahl und des Institutes für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden erhielten für ihre gemeinsame „Entwicklung eines simulationsgestützten Verfahrens zur schnellen Imprägnierung großer und komplexer Strukturen auf Basis neuartiger textiler Halbzeuge mit integrierten temporären Strömungskanälen“ den AVK-Preis in der Kategorie „Forschung/Wissenschaft“.

Dr.-Ing. Dilmurat Abliz, Dr.-Ing. Amke Eggers, Prof. Dr.-Ing. Gerhard Ziegmann und Prof. D.-Ing. Dieter Meiners vom PuK der TU Clausthal sowie Dipl.-Ing. David Hoffmann, Dr.-Ing. Wolfgang Trümper und Prof. Dr.-Ing. Chokri Cherif vom ITM der TU Dresden gehören zum Preisträgerteam und nahmen die in der Fachwelt hoch angesehene Auszeichnung dankend entgegen.

More information:
TU Dresden ITM AVK
Source:

TU Dresden