From the Sector

Reset
563 results
05.02.2024

ECHA: Strategic goals for 2024-2028

The European Chemicals Agency (ECHA) has published its Strategy Statement 2024-2028. The strategy details the agency’s goals and priorities over the next five years to protect health and the environment through its work for chemical safety.

Main elements of the Strategy – Goals and Priorities

Be a trusted chemicals agency – ECHA aims to achieve this by delivering its legal mandate using independent expertise and robust data. The Agency, to support this, will:

  • Deliver transparent, independent, and high-quality scientific advice, opinions, and decisions;
  • Enhance decision and policy making through optimal use of data, knowledge, and competence; and
  • Facilitate the prioritisation and co-ordination of regulatory actions on substances and groups of substances with the European Commission (EC), EU agencies and Member State Authorities.

 
Respond to emerging challenges and changes in their legal landscape – ECHA will prepare for new tasks and inform EU chemical and environmental policy. To support this goal, it will focus on the following priorities:

The European Chemicals Agency (ECHA) has published its Strategy Statement 2024-2028. The strategy details the agency’s goals and priorities over the next five years to protect health and the environment through its work for chemical safety.

Main elements of the Strategy – Goals and Priorities

Be a trusted chemicals agency – ECHA aims to achieve this by delivering its legal mandate using independent expertise and robust data. The Agency, to support this, will:

  • Deliver transparent, independent, and high-quality scientific advice, opinions, and decisions;
  • Enhance decision and policy making through optimal use of data, knowledge, and competence; and
  • Facilitate the prioritisation and co-ordination of regulatory actions on substances and groups of substances with the European Commission (EC), EU agencies and Member State Authorities.

 
Respond to emerging challenges and changes in their legal landscape – ECHA will prepare for new tasks and inform EU chemical and environmental policy. To support this goal, it will focus on the following priorities:

  • Implement new legal requirements using existing and new synergies and experience;
  • Work with relevant EU agencies and bodies to deliver Chemical Strategy for Sustainability (CSS) actions and objectives; and
  • Provide scientific and technical advice on chemicals to EU policy makers.

 
Communicate and Engage – by collaborating with stakeholders and partners, ECHA will strengthen public confidence in chemicals regulation. In support of this goal, the Agency will:

  • Deepen their network of engagement with EU institutions and agencies and Member States;
  • Collaborate and provide tools, advice, and support to industry; and
  • Promote awareness and understanding of ECHA's work to stakeholders representing workers, the public and the environment.

 
Lead on chemical knowledge and expertise – the Agency will advance knowledge and understanding on chemical safety. To achieve this, it will:

  • Contribute proactively to expanding scientific and technical competence and knowledge on chemical safety;
  • Promote the development and use of alternative methods for the assessment of hazards and risks of chemicals; and
  • Support the EC to enhance engagement and synergies at international level.

 
Invest in people and organisational excellence – ECHA is committed to working together to achieve their vision. In order to achieve this they will:

  • Develop and empower their people for success;
  • Create optimal ways of working for the Agency, its bodies, its people, and the environment; and
  • Adopt an IT delivery model that is cost-effective, streamlined, modular, interoperable, cloud based and centralised.
Source:

European Chemicals Agency

Takao Terashima Foto Mimaki Europe
Takao Terashima
30.01.2024

Mimaki Europe: Neuer Managing Director

Mimaki Europe, Hersteller von Tintenstrahldruckern und Schneidetechnologien, hat die Ernennung von Takao Terashima zum neuen Managing Director bekanntgegeben.

Terashima begann seine Laufbahn bei Mimaki 1997 in der Forschungs- und Entwicklungsabteilung des Unternehmens. In den vergangenen 26 Jahren entwickelte er umfangreiche Fachkenntnisse in Bezug auf das Technologieportfolio von Mimaki und den zugehörigen Markt.

Mimaki Europe, Hersteller von Tintenstrahldruckern und Schneidetechnologien, hat die Ernennung von Takao Terashima zum neuen Managing Director bekanntgegeben.

Terashima begann seine Laufbahn bei Mimaki 1997 in der Forschungs- und Entwicklungsabteilung des Unternehmens. In den vergangenen 26 Jahren entwickelte er umfangreiche Fachkenntnisse in Bezug auf das Technologieportfolio von Mimaki und den zugehörigen Markt.

Während seiner Zeit bei Mimaki hatte er mehrere leitende Positionen im Unternehmen inne. Bevor er seine neue Rolle übernahm, war er Senior General Manager der Asia Oceania Business Unit, eine Position, die er 2017 antrat. Davor war er von April bis Oktober 2017 sechs Monate lang Senior Deputy General Manager of Quality Management.
 
Terashimas beruflicher Werdegang bei Mimaki führte ihn über den japanischen Hauptsitz hinaus in mehrere Niederlassungen des Unternehmens, wo er unterschiedliche Zuständigkeiten hatte. Zwischen 2013 und 2017 war er vier Jahre lang Managing Director von Mimaki Singapur. Zu Beginn seiner Karriere arbeitete er auch bei Mimaki USA im technischen Support.
 
Terashima, der Takahiro Hiraki als Managing Director von Mimaki Europe ablöst, wird umfangreiche Branchenkenntnisse, analytisches Denken, geschäftliche und teambildende Fähigkeiten sowie ein umfassendes Wissen über das Unternehmen in die neue Rolle einbringen.

Source:

Mimaki Europe

26.01.2024

Solvay reduces transportation carbon footprint

Solvay is partnering with transportation providers KIITOSIMEON and ADAMS LOGISTICS to reduce the carbon footprint of its facility in Voikkaa, Finland. Known for its hydrogen peroxide technology, the site has a yearly capacity of 85 kilotons, making it the largest hydrogen peroxide unit in the country and one of the largest in Europe. However, the transportation of its products results in more than 850 tons of CO2 emissions annually, attributed to the several thousands deliveries conducted each year.

While the Voikkaa site has been operating on 100% wind-generated electricity since 2023, the journey towards decarbonization takes another step forward as it transitions transportation fuel from diesel to biofuel in the first quarter of 2024. This shift will result in a significant annual reduction of over 700 tons of CO2 emissions, representing more than 8O% reduction in the site's transportation carbon footprint.

Solvay is partnering with transportation providers KIITOSIMEON and ADAMS LOGISTICS to reduce the carbon footprint of its facility in Voikkaa, Finland. Known for its hydrogen peroxide technology, the site has a yearly capacity of 85 kilotons, making it the largest hydrogen peroxide unit in the country and one of the largest in Europe. However, the transportation of its products results in more than 850 tons of CO2 emissions annually, attributed to the several thousands deliveries conducted each year.

While the Voikkaa site has been operating on 100% wind-generated electricity since 2023, the journey towards decarbonization takes another step forward as it transitions transportation fuel from diesel to biofuel in the first quarter of 2024. This shift will result in a significant annual reduction of over 700 tons of CO2 emissions, representing more than 8O% reduction in the site's transportation carbon footprint.

As part of its commitment to carbon neutrality by 2050, Solvay has outlined a sustainability roadmap with around 40 energy transition projects. These projects focus on eliminating coal usage, emphasizing renewable energy sources, prioritizing energy efficiency, and driving process innovation. Solvay has further committed to reduce its emissions* along the value chain by 20% by 2030.

*scope 3 emissions, focus 5 categories, 2021 baseline

22.01.2024

Adient again ranked as Top Employer

Adient, a leader in automotive seating, has been certified for the second time by the Top Employers Institute as a European Top Employer for several of its EMEA locations.
 
23 of the automotive supplier’s locations in the Czech Republic, Hungary, North Macedonia, Poland, Romania, and Serbia underwent an extensive assessment by the institute and were evaluated in categories such as People Strategy, Work Environment, Talent Acquisition, Learning, Diversity & Inclusion, Wellbeing and more. All six assessed markets obtained the certification, having already done so in last year’s edition.
 
While the organization’s overall score improved by 4.5% compared to 2023, Adient stands out the most from its competitors in the areas of People Strategy and DE&I practices, at 11% and 7%, respectively.

The Top Employers Certification Program has been created to provide guidance on people practices of employers in a wide range of industries. It evaluates companies worldwide and provides feedback on their working culture based on a best practice survey.

Adient, a leader in automotive seating, has been certified for the second time by the Top Employers Institute as a European Top Employer for several of its EMEA locations.
 
23 of the automotive supplier’s locations in the Czech Republic, Hungary, North Macedonia, Poland, Romania, and Serbia underwent an extensive assessment by the institute and were evaluated in categories such as People Strategy, Work Environment, Talent Acquisition, Learning, Diversity & Inclusion, Wellbeing and more. All six assessed markets obtained the certification, having already done so in last year’s edition.
 
While the organization’s overall score improved by 4.5% compared to 2023, Adient stands out the most from its competitors in the areas of People Strategy and DE&I practices, at 11% and 7%, respectively.

The Top Employers Certification Program has been created to provide guidance on people practices of employers in a wide range of industries. It evaluates companies worldwide and provides feedback on their working culture based on a best practice survey.

17.01.2024

Everfield acquires Swedish software specialist for commercial laundry industry

Software group Everfield has acquired the Swedish software reseller “SoCom Scandinavia AB” (SoCom Scandinavia). The previously independent reseller is now a subsidiary of German “SoCom Informationssysteme GmbH” (SoCom), which Everfield acquired early 2023. SoCom Scandinavia distributes SoCom’s ERP system for the commercial laundry industry in Scandinavia. SoCom is among Europe’s leading providers in this segment and with this acquisition is further expanding its market position in the Nordic countries.

Software group Everfield has acquired the Swedish software reseller “SoCom Scandinavia AB” (SoCom Scandinavia). The previously independent reseller is now a subsidiary of German “SoCom Informationssysteme GmbH” (SoCom), which Everfield acquired early 2023. SoCom Scandinavia distributes SoCom’s ERP system for the commercial laundry industry in Scandinavia. SoCom is among Europe’s leading providers in this segment and with this acquisition is further expanding its market position in the Nordic countries.

“By acquiring SoCom Scandinavia, we have successfully completed the first so-called bolt-on acquisition for one of our portfolio companies”, says Oscar Koberling, Acquisitions Manager at Everfield. In a bolt-on acquisition, the company being purchased is integrated into an existing portfolio company. “We focus on long-term sustainable growth and work closely with the management of our portfolio companies to identify the right targets”, Koberling highlights. “With the addition of SoCom Scandinavia, SoCom can now further strengthen the sales and support in this region and thereby continue to foster growth in Scandinavia.” With its Enterprise Resource Planning (ERP) software “TIKOS”, the German software developer SoCom from Krumbach enables laundries of any scale to achieve end-to-end process management.

SoCom Scandinavia distributes the “TIKOS” laundry software in Sweden, Finland, Norway, Denmark and Iceland. The company was founded in 2017 by the sole shareholder Anna Johansson, in close cooperation with the German SoCom Informationssysteme GmbH. “I myself come from the commercial laundry industry and was therefore able to convince myself of the performance and flexibility of the TIKOS software in practice”, says Anna Johansson. “Our success in the past years shows that many laundries in Scandinavia share this assessment. In the future, we will work even more closely with our German colleagues to further expand our market share in the region.”

Johansson and her team will continue to be available to customers at the existing location. “Since establishing SoCom Scandinavia, Anna and her team have already won and supported a plethora of well-known clients for our software”, emphasizes SoCom’s CEO Michael Wieser. “By integrating SoCom Scandinavia, we can streamline our processes even further. Our main goal remains to offer the best possible service to our clients.”

With its steadily growing software and service portfolio, SoCom has been operating in the laundry industry for over thirty years and is a market leader in the German-speaking region. In total, SoCom’s products are used in over 350 laundries across 17 countries.

More information:
Everfield SoCom laundry Software
Source:

möller pr GmbH

snowfield-bulky-down-jacket-icicle Photo ALLIED Feather + Down
28.12.2023

Down Apparel for the European Market

ALLIED Feather + Down, global leaders in high performance, ethically sourced down, and MN Inter-Fashion, manufacturers of high performance luxury outerwear, announced that the ALLIED Feather + Down outerwear collection will be available to the European market.  

Originally released only in Japan, the exclusive collection will be available to select European boutique retailers for the fall 2024 season. Limited to a few hundred pieces, this line will showcase the breadth of ALLIED’s down offering, from their industry-leading ExpeDRY down insulation to their exceedingly high performance 1000 fill power down. It will also include MN Inter-Fashion’s experience delivering quality design and craftsmanship to some of the best known fashion houses in the world.

Designed, cut, and sewn by MN Inter-Fashion in Japan using materials from ALLIED and Pertex, the jackets shall represent a collision between cutting edge fashion aesthetics and materials normally reserved for highly technical outerwear. The result is a unique garment with a sophisticated urban look blended with performance that rivals the most technical outdoor apparel available. 

ALLIED Feather + Down, global leaders in high performance, ethically sourced down, and MN Inter-Fashion, manufacturers of high performance luxury outerwear, announced that the ALLIED Feather + Down outerwear collection will be available to the European market.  

Originally released only in Japan, the exclusive collection will be available to select European boutique retailers for the fall 2024 season. Limited to a few hundred pieces, this line will showcase the breadth of ALLIED’s down offering, from their industry-leading ExpeDRY down insulation to their exceedingly high performance 1000 fill power down. It will also include MN Inter-Fashion’s experience delivering quality design and craftsmanship to some of the best known fashion houses in the world.

Designed, cut, and sewn by MN Inter-Fashion in Japan using materials from ALLIED and Pertex, the jackets shall represent a collision between cutting edge fashion aesthetics and materials normally reserved for highly technical outerwear. The result is a unique garment with a sophisticated urban look blended with performance that rivals the most technical outdoor apparel available. 

Source:

ALLIED Feather + Down

AZL Aachen GmbH: Kick-off meeting for "Trends and Design Factors for Hydrogen Pressure Vessels" project (c) AZL Aachen GmbH
21.12.2023

AZL Aachen GmbH: Kick-off meeting for "Trends and Design Factors for Hydrogen Pressure Vessels" project

The kick-off meeting for the "Trends and Design Factors for Hydrogen Pressure Vessels" project, recently held at AZL Aachen GmbH, was a successful event, bringing together more than 37 experts in the field of composite technologies. This event laid a solid foundation for the Joint Partner Project, which currently comprises a consortium of 20 renowned companies from across the composite pressure vessel value chain: Ascend Performance Materials, C evotec GmbH, Chongqing Polycomp International Corp. (CPIC), Conbility GmbH, Elkamet Kunststofftechnik GmbH, F.A. Kümpers GmbH & Co. KG, f loteks plastik sanayi ticaret a.s., Formosa Plastics Corporation, Heraeus Noblelight GmbH, Huntsman Advanced Materials, Kaneka Belgium NV, Laserline GmbH, Mitsui Chemicals Europe GmbH, Plastik Omnium, Rassini Europe GmbH, Robert Bosch GmbH, Swancor Holding Co. Ltd. Ltd., TECNALIA, Toyota Motor Europe NV/SA, Tünkers do Brasil Ltda.

The project follows AZL´s well proven approach of a Joint Partner Project, aiming to provide technology and market insights as well as benchmarking of different material and production setups in combination with connecting experts along the value chain.

The kick-off meeting for the "Trends and Design Factors for Hydrogen Pressure Vessels" project, recently held at AZL Aachen GmbH, was a successful event, bringing together more than 37 experts in the field of composite technologies. This event laid a solid foundation for the Joint Partner Project, which currently comprises a consortium of 20 renowned companies from across the composite pressure vessel value chain: Ascend Performance Materials, C evotec GmbH, Chongqing Polycomp International Corp. (CPIC), Conbility GmbH, Elkamet Kunststofftechnik GmbH, F.A. Kümpers GmbH & Co. KG, f loteks plastik sanayi ticaret a.s., Formosa Plastics Corporation, Heraeus Noblelight GmbH, Huntsman Advanced Materials, Kaneka Belgium NV, Laserline GmbH, Mitsui Chemicals Europe GmbH, Plastik Omnium, Rassini Europe GmbH, Robert Bosch GmbH, Swancor Holding Co. Ltd. Ltd., TECNALIA, Toyota Motor Europe NV/SA, Tünkers do Brasil Ltda.

The project follows AZL´s well proven approach of a Joint Partner Project, aiming to provide technology and market insights as well as benchmarking of different material and production setups in combination with connecting experts along the value chain.

The kick-off meeting not only served as a platform to foster new contacts and get informed about the expertise and interests of the consortium members in the field of hydrogen pressure vessels, but also laid the groundwork for steering the focus of the upc oming project's ambitious phases. As a basis for the interactive discussion session, AZL outlined the background, motivation and detailed work plan. The central issues of the dialogue were the primary objectives, the most pressing challenges, the contribut ion to competitiveness, and
the priorities that would best meet the expectations of the project partners.

Discussions covered regulatory issues, the evolving value chain and the supply and properties of key materials such as carbon and glass fibres and resins. The consortium defined investigations into different manufacturing technologies, assessing their matu rity and potential benefits. Design layouts, including liners, boss designs and winding patterns, were thoroughly considered, taking into account their implications for mobile and stationary storage. The group is also interested in cost effective testing m ethods and certification processes, as well as the prospects for recycling into continuous fibres and the use of sustainable materials. Insight was requested into future demand for hydrogen tanks, OEM needs and strategies, and technological developments to produce more economical tanks.

The meeting highlighted the importance of CAE designs for fibre patterns, software suitability and the application dependent use of thermoset and thermoplastic designs.

The first report meeting will also set the stage of the next project phase, which will be the creation of reference designs by AZL's engineering team. These designs will cover a range of pressure vessel configurations using a variety of materials and production concepts. The aim is to develop models that not only re flect current technological capabilities, but also provide deep insight into the cost analysis of different production technologies, their CO2 footprint, recycling aspects and scalability.

AZL's project remains open to additional participants. Companies interested in joining this initiative are invited to contact Philipp Fröhlig.

Sales manager Frank Neumann © Dibella
Frank Neumann
20.12.2023

Dibella without sales manager Frank Neumann in future

The long-time sales manager is leaving the company at the end of this year. Frank Neumann joined Dibella in 1999 as a sales representative in the field service and was most recently responsible as sales manager for the areas of northern Germany and Berlin, as well as for exports, particularly for Scandinavia and Eastern Europe. He played a leading role in developing cruise companies as a new customer base for Dibella.

In addition, he was one of the co-founders of MaxTex, an international association that aims to ensure sustainable trade along the entire value chain, together with the then Dibella Managing Director Ralf Hellmann.

As an authorised signatory and member of the management board, Frank Neumann made a significant contribution to the company's success. "With Frank Neumann, we are saying goodbye to a valued colleague and proven expert. We would like to thank Mr Neumann for his extraordinary commitment to Dibella and wish him all the best for the future," says Stefan Tenbusch, Managing Director at Dibella.

The long-time sales manager is leaving the company at the end of this year. Frank Neumann joined Dibella in 1999 as a sales representative in the field service and was most recently responsible as sales manager for the areas of northern Germany and Berlin, as well as for exports, particularly for Scandinavia and Eastern Europe. He played a leading role in developing cruise companies as a new customer base for Dibella.

In addition, he was one of the co-founders of MaxTex, an international association that aims to ensure sustainable trade along the entire value chain, together with the then Dibella Managing Director Ralf Hellmann.

As an authorised signatory and member of the management board, Frank Neumann made a significant contribution to the company's success. "With Frank Neumann, we are saying goodbye to a valued colleague and proven expert. We would like to thank Mr Neumann for his extraordinary commitment to Dibella and wish him all the best for the future," says Stefan Tenbusch, Managing Director at Dibella.

More information:
Dibella MaxTex
Source:

Dibella GmbH

11.12.2023

Syensqo officially demerged from Solvay and launched on Euronext

Syensqo announces the successful listing of its shares on Euronext Brussels and Euronext Paris under ticker SYENS. After the completion of the spin-off from Solvay, the listing marks a historical milestone as the company embarks on a journey focused on delivering superior growth and value creation.

Syensqo’s portfolio of market leading solutions addresses environmental and social challenges, through electrification, lightweighting, connectivity and resource efficiency. In addition, Syensqo is at the heart of the transition towards a net-zero economy, which is expected to drive new sources of value and support the company’s long-term growth.

With more than 13,000 employees and activities spread across the world (with 41% of FY2022 net sales in the Americas, 36% in Asia-Pacific and 23% Europe), Syensqo’s long-term ambition is to be the prime innovation partner for its customers, growing on average at around two times the rate of its main end markets, while further improving its best-in-class margin and returns.

Syensqo announces the successful listing of its shares on Euronext Brussels and Euronext Paris under ticker SYENS. After the completion of the spin-off from Solvay, the listing marks a historical milestone as the company embarks on a journey focused on delivering superior growth and value creation.

Syensqo’s portfolio of market leading solutions addresses environmental and social challenges, through electrification, lightweighting, connectivity and resource efficiency. In addition, Syensqo is at the heart of the transition towards a net-zero economy, which is expected to drive new sources of value and support the company’s long-term growth.

With more than 13,000 employees and activities spread across the world (with 41% of FY2022 net sales in the Americas, 36% in Asia-Pacific and 23% Europe), Syensqo’s long-term ambition is to be the prime innovation partner for its customers, growing on average at around two times the rate of its main end markets, while further improving its best-in-class margin and returns.

Upon listing, Syensqo has 105,876,417 ordinary shares in issue, each carrying one voting right. The Syensqo share price started its journey at a value of € 90 at market open (9.00 am CET), which corresponds to a market capitalization of € 9.53 billion.

More information:
Syensqo Solvay chemicals
Source:

Syensqo

Online session “Redefining Textile Waste Sorting: Impulses and findings for the future of next-gen sorting facilities” Graphic Texaid
27.11.2023

Redefining textile waste sorting

To meet future demands on the amount of textile waste which needs to be collected and sorted, as well as the demand on recycling feedstock, it is necessary to match the demand and need for sorting of waste in Europe and create cost efficiency sorting capacities with larger scale and automation are necessary.

In an online session “Redefining Textile Waste Sorting: Impulses and findings for the future of next-gen sorting facilities” Texaid and partners talk about the current state of development and the challenges for the future.  Anna Pehrsson (Texaid), Gesine Köppe (ITA Augsburg GmbH) and partners present the results of a Technology Assessment conducted within The Transform Textile Waste into Feedstock Project (initiated by TEXAID within the ReHubs initiative) to assess the best available sorting techniques and process.

Details:  
December 4th 2023
12:30-13:30pm   
Online
For registration follow the link.

To meet future demands on the amount of textile waste which needs to be collected and sorted, as well as the demand on recycling feedstock, it is necessary to match the demand and need for sorting of waste in Europe and create cost efficiency sorting capacities with larger scale and automation are necessary.

In an online session “Redefining Textile Waste Sorting: Impulses and findings for the future of next-gen sorting facilities” Texaid and partners talk about the current state of development and the challenges for the future.  Anna Pehrsson (Texaid), Gesine Köppe (ITA Augsburg GmbH) and partners present the results of a Technology Assessment conducted within The Transform Textile Waste into Feedstock Project (initiated by TEXAID within the ReHubs initiative) to assess the best available sorting techniques and process.

Details:  
December 4th 2023
12:30-13:30pm   
Online
For registration follow the link.

Source:

Texaid

Robert van de Kerkhof (c) Karl Michalski
Robert van de Kerkhof
27.11.2023

Robert van de Kerkhof joins HeiQ’s Board of Directors

HeiQ announces the appointment of Robert van de Kerkhof as Non-Executive Director, with effect from 1 January 2024 to the board of HeiQ plc and as Chairman of the Environmental, Occupation, Health & Safety and Sustainability Committee. Robert will also be appointed to the board of HeiQ AeoniQ Holding AG (in Switzerland), a subsidiary of HeiQ plc.

Robert van de Kerkhof has over 30 years of experience in general management and sustainability leadership and extensive knowledge of the textiles industry, including cellulosic fiber technology. He founded PEPPER-i2, an advisory company specializing in sustainability and circularity. Robert also serves as the Chief Sustainability Officer and as a Board Member of Lenzing AG, a position he has held since 2014. Robert will be leaving Lenzing and its Board on the 31st. December 2023.

Robert joins HEIQ AeoniQ™ with the firm belief that the novel HEIQ AeoniQ™ man-made cellulosic fibers (MMCF) are one of the most promising solutions to transform the textile industry, now the second-most polluting in the world, into one of the most sustainable, by rendering fossil fuel-based fibers like polyester obsolete.

HeiQ announces the appointment of Robert van de Kerkhof as Non-Executive Director, with effect from 1 January 2024 to the board of HeiQ plc and as Chairman of the Environmental, Occupation, Health & Safety and Sustainability Committee. Robert will also be appointed to the board of HeiQ AeoniQ Holding AG (in Switzerland), a subsidiary of HeiQ plc.

Robert van de Kerkhof has over 30 years of experience in general management and sustainability leadership and extensive knowledge of the textiles industry, including cellulosic fiber technology. He founded PEPPER-i2, an advisory company specializing in sustainability and circularity. Robert also serves as the Chief Sustainability Officer and as a Board Member of Lenzing AG, a position he has held since 2014. Robert will be leaving Lenzing and its Board on the 31st. December 2023.

Robert joins HEIQ AeoniQ™ with the firm belief that the novel HEIQ AeoniQ™ man-made cellulosic fibers (MMCF) are one of the most promising solutions to transform the textile industry, now the second-most polluting in the world, into one of the most sustainable, by rendering fossil fuel-based fibers like polyester obsolete.

Robert has also held senior positions as President of the Austrian Fiber Institute, President and Board Member of CIRFS – the European Man-made Fibres Association, and Chairman of the ReHubs Business Council for Euratex, which is the voice of the European Apparel and Textile Industry.

Source:

HeiQ

In combination with Oerlikon's atmos.io digital platform, Haelixa's DNA marker technology makes the clear traceability of textile products a reality. Image Oerlikon Textile GmbH & Co. KG
20.11.2023

Man-made fiber yarns with DNA: Supply chains in textile end products traceable

In cooperation with the Swiss company Haelixa, Oerlikon Manmade Fibers Solutions will, in future, be able to make the entire value chain of a textile end product transparent and hence sustainable. The two development partners are offering a solution for the comprehensive traceability of products, as required by the European Green Deal.

An essential part of the solution is the DNA marker technology developed by Haelixa that enables complete traceability of materials. These markers survive all production process steps, validating that the end product is identifiable. "This innovative technology employs distinct DNA tailored for each project, establishing a unique identity for the material," explains Holly Berger, Marketing Director at Haelixa. "Once the DNA is integrated into the material, it becomes irremovable, impervious to falsification or alteration." Handling is straightforward: the DNA marker is fed into the spinning process with the preparation oil, for example. The preparation system is modified accordingly. Further feeding options are currently being developed.

In cooperation with the Swiss company Haelixa, Oerlikon Manmade Fibers Solutions will, in future, be able to make the entire value chain of a textile end product transparent and hence sustainable. The two development partners are offering a solution for the comprehensive traceability of products, as required by the European Green Deal.

An essential part of the solution is the DNA marker technology developed by Haelixa that enables complete traceability of materials. These markers survive all production process steps, validating that the end product is identifiable. "This innovative technology employs distinct DNA tailored for each project, establishing a unique identity for the material," explains Holly Berger, Marketing Director at Haelixa. "Once the DNA is integrated into the material, it becomes irremovable, impervious to falsification or alteration." Handling is straightforward: the DNA marker is fed into the spinning process with the preparation oil, for example. The preparation system is modified accordingly. Further feeding options are currently being developed.

Smart factory: total transparency with atmos.io
The concept is complemented by atmos.io, Oerlikon's digital platform, which records and evaluates extensive production and process data during the yarn manufacturing process. Atmos.io gives the yarn its digital identity during its time on Oerlikon systems, from the melt to the packaged package. This technology has been used successfully for some time to monitor the production process. With atmos.io, deviations in process parameters and yarn data can be identified and rectified within a very short time, which in turn keeps the yarn quality stable and reduces waste rates.

Combining both technologies enables clear traceability of the yarn produced, even in the downstream process steps. Hence, the yarn's components, qualities, manufacturing conditions, and origin are traced beyond doubt in the finished garment. "The unique DNA carries the 'roots' of the yarn digitally recorded in atmos.io into the everyday life of the end consumer," says Jochen Adler, CTO at Oerlikon Manmade Fibers. The textile end products meet the requirements of the digital product passport required by the EU, which contains the information needed to assess their life cycle assessment and circularity. Initial long-term tests have shown 100% traceability of the yarns in the POY and FDY spinning process. If the yarn manufacturer relies on the atmos.io platform, production systems can be adapted relatively easily to use the DNA markers.

Source:

Oerlikon Textile GmbH & Co. KG

Carbios and L’Oréal win Pioneer Award for PET recycling solution Photo: Carbios
Emmanuel Ladent (CEO Carbios, on the left) and Jacques Playe (Packaging and Development Director at L’Oréal, on the right)
15.11.2023

Carbios and L’Oréal win Pioneer Award for PET recycling solution

Carbios and L’Oréal have won the “Pioneer Awards” in the Industry category, presented by the Solar Impulse Foundation at the first World Alliance Summit. This prize was awarded to Carbios for its enzymatic PET recycling solution, labeled “Efficient Solution” by the Solar Impulse Foundation since 2019, and to L’Oréal for using this technology for the first time in a cosmetics bottle prototype. Carbios’ solution offers brands an alternative to petro-sourced plastic that helps them meet their sustainability commitments. This advancement paves the way for future applications in other sectors such as packaging, food and beverage, and textiles.

Carbios and L’Oréal have won the “Pioneer Awards” in the Industry category, presented by the Solar Impulse Foundation at the first World Alliance Summit. This prize was awarded to Carbios for its enzymatic PET recycling solution, labeled “Efficient Solution” by the Solar Impulse Foundation since 2019, and to L’Oréal for using this technology for the first time in a cosmetics bottle prototype. Carbios’ solution offers brands an alternative to petro-sourced plastic that helps them meet their sustainability commitments. This advancement paves the way for future applications in other sectors such as packaging, food and beverage, and textiles.

Carbios and L’Oréal: a long-term collaboration
Since 2017, Carbios and L’Oréal have been working together with a shared vision of accelerating the transition to a circular economy for plastic. In 2017, both companies created a Consortium to improve the recyclability and circularity of PET packaging.  Nestlé Waters, PepsiCo and Suntory Beverage & Food Europe joined this Consortium in 2019 to scale up Carbios’ innovation. The world’s first enzymatically recycled PET packaging was made in 2021 using Carbios’ biorecycling process. The world’s first PET biorecycling plant is scheduled to be commissioned in 2025. In parallel, Carbios is rolling out its technology internationally through licensing agreements.

The environmental benefits of biorecycling developed by Carbios
Recent life-cycle analyses[1] show a 57% reduction in CO2 emissions compared with the production of virgin plastic[2], and for every tonne of recycled PET produced, 1.3 tonnes of petrol are avoided. Compared with conventional recycling, enzymatic recycling is 4 times more circular (calculated according to the Ellen MacArthur Foundation’s Material Circularity Indicator). Thanks to its highly selective enzyme, optimized for efficient PET degradation, Carbios’ depolymerization process can process all types of PET waste, including colored, multilayer or textile waste that cannot be recycled using current technologies. Furthermore, the two monomers produced (PTA and MEG) make it possible to recreate recycled PET products of identical quality to virgin ones, and suitable for food contact.
 
 
[1] Database ecoinvent 3.8
[2] French scenario, taking into account the detour of 50% of PET waste from conventional end-of-life. Virgin PET: 2.53 kg CO2/kg (cradle to gate)

Source:

Carbios

08.11.2023

adidas: Revenue increase in third quarter

Developments:

Developments:

  • Currency-neutral revenues up 1% driven by growth in all regions except North America
  • Top-line development reflects focus on conservative sell-in and full-price business
  • Gross margin up 0.2pp to 49.3% driven by reduced freight costs, a more favorable business mix, and lower inventory allowances; discounting levels continue to improve  
  • Operating profit of € 409 million includes extraordinary expenses of around € 110 million
  • Conservative sell-in strategy paying off as inventory position improves substantially versus Q2 level to € 4.8 billion; now down 23% year-over-year

Outlook
adidas expects revenues to decline at a low-single-digit rate
On October 17, adidas had adjusted its full year financial guidance to reflect both the positive impact of the second drop of some of its Yeezy inventory and the better-than-expected development of the underlying business. At the same time, macroeconomic challenges and geopolitical tensions persist. Elevated recession risks in North America and Europe as well as uncertainty around the recovery in Greater China continue to exist. In addition, the company’s revenue development will continue to be impacted by the initiatives to significantly reduce high inventory levels in North America and the company’s focus on full-price sales across its own channels. As a result, adidas now expects currency-neutral revenues to decline at a low-single-digit rate in 2023 (previously: decline at a mid-single-digit rate).

Underlying operating profit anticipated to reach a level of around € 100 million
The company’s underlying operating profit – excluding any one-offs related to Yeezy and the ongoing strategic review – is now anticipated to reach a level of around € 100 million in 2023 (previously: around break-even level). Including the positive impact from the two Yeezy drops in Q2 and Q3 of around € 300 million (previously: € 150 million), the potential write-off of the remaining Yeezy inventory of now around € 300 million (previously: € 400 million) and one-off costs related to the strategic review of up to € 200 million (unchanged), adidas now expects a reported operating loss of around € 100 million in 2023 (previously: loss of € 450 million).

Source:

adidas AG

Lenzing and Södra win ITMF Award for cooperation in textile recycling (c) Lenzing AG/Leopold
Lenzing x Södra Project team
06.11.2023

Lenzing and Södra: ITMF Award for cooperation in textile recycling

  • Lenzing and Södra – a long-standing partnership for systemic change
  • International Textile Manufacturers Federation (ITMF) honored the two companies in the "International Cooperation" category
  • EU co-funded recycling project for textiles on an industrial scale

The Lenzing Group, the world’s leading supplier of specialty fibers for the textile and nonwovens industries, and the Swedish pulp producer Södra have received the ITMF Award 2023 in the category “International Cooperation” for their joint achievements in textile recycling and circular economy. The award was presented at the ITMF Annual Conference in Keqiao, China, on November 06, 2023.

  • Lenzing and Södra – a long-standing partnership for systemic change
  • International Textile Manufacturers Federation (ITMF) honored the two companies in the "International Cooperation" category
  • EU co-funded recycling project for textiles on an industrial scale

The Lenzing Group, the world’s leading supplier of specialty fibers for the textile and nonwovens industries, and the Swedish pulp producer Södra have received the ITMF Award 2023 in the category “International Cooperation” for their joint achievements in textile recycling and circular economy. The award was presented at the ITMF Annual Conference in Keqiao, China, on November 06, 2023.

The ITMF Award 2023 is given by the International Textile Manufacturers Federation (ITMF) to recognize outstanding achievements and merits in the textile sector in two categories: ”Sustainability & Innovation“ and ”International Cooperation“. Since 2021, the two pioneers have been joining forces in textile recycling, making a decisive contribution to promoting the circular economy in the fashion industry. As part of the cooperation, the companies intend to share their knowledge with each other and jointly develop processes to enable the wider use of cellulose-based used textiles on a commercial scale.

The OnceMore® pulp from Södra, which was jointly developed further by Södra and Lenzing, is subsequently used, among other things, as a raw material for the production of Lenzing fibers with REFIBRA™ technology. The OnceMore® process makes it possible to process and recycle a blend of cotton and polyester.

ITMF paid particular tribute to the joint LIFE TREATS project (Textile Recycling in Europe AT Scale)1,which was supported by an EU grant of EUR 10m under the LIFE 20222 program and aims to build a large-scale plant at Södra's Mörrum site in Sweden.

For more information on the ITMF Awards 2023, visit the ITMF website.

1 Project 101113614 — LIFE22-ENV-SE-TREATS
2 https://cinea.ec.europa.eu/programmes/life_en

Source:

Lenzing AG

CHT USA celebrates expansion of its headquarters in Michigan (c) CHT Group
03.11.2023

CHT USA celebrates expansion of its headquarters in Michigan

With a ribbon cutting ceremony on October 24, 2023 CHT USA celebrated the $ 25 million expansion at its US headquarters in Cassopolis, Michigan. More than 100 attendees came to the celebrations, among others officials from local, county and state governments, neighbors, and area business leaders, CHT employees, CTO Dr. Bernhard Hettich as representative of CHT’s Global management team, and members of the press.

In his speech, Dr. Bernhard Hettich, CTO of CHT Group, thanked the local authorities for their business-friendly policies and stated that a development towards sustainability in many areas would not be possible without CHT's silicone products: "With CHT's largest single investment outside Europe, CHT is taking a big step and doubling its silicone production capacity. We intend to use this expansion not only to support our customers in the Americas, but also to leverage the capacity for our global growth. In line with the motto "CHT first", further steps in this direction will follow."

With a ribbon cutting ceremony on October 24, 2023 CHT USA celebrated the $ 25 million expansion at its US headquarters in Cassopolis, Michigan. More than 100 attendees came to the celebrations, among others officials from local, county and state governments, neighbors, and area business leaders, CHT employees, CTO Dr. Bernhard Hettich as representative of CHT’s Global management team, and members of the press.

In his speech, Dr. Bernhard Hettich, CTO of CHT Group, thanked the local authorities for their business-friendly policies and stated that a development towards sustainability in many areas would not be possible without CHT's silicone products: "With CHT's largest single investment outside Europe, CHT is taking a big step and doubling its silicone production capacity. We intend to use this expansion not only to support our customers in the Americas, but also to leverage the capacity for our global growth. In line with the motto "CHT first", further steps in this direction will follow."

For the Cass County site, the approximately 45,000 square feet new facility with 5 reactors and distillation units resulted in an increase in the total area of the company's site to 120,000 square feet. This will then allow sufficient space for additional reactors and downstream processes. The CHT USA site expansion has created approximately 30 highly skilled jobs in the community.

CHT USA’s Regional Sales and Marketing Director NORAM, Matthew Loman hosted the Ribbon Cutting ceremony.

More information:
CHT Group USA silicone
Source:

CHT Group

03.11.2023

Solvay announces Board of Directors for standalone SYENSQO

Solvay announced the future Board of Directors of SYENSQO, effective upon completion of the planned separation of Solvay into two companies – SOLVAY and SYENSQO – which is on track to be completed in December 2023.

SYENSQO’s Board will be composed of 10 members, including 6 independent members, 3 members representing the reference shareholder, Solvac, and the company CEO. They have deep expertise in specialty industries, international business operations, risk management, corporate governance, finance and clean technology.

Solvay announced the future Board of Directors of SYENSQO, effective upon completion of the planned separation of Solvay into two companies – SOLVAY and SYENSQO – which is on track to be completed in December 2023.

SYENSQO’s Board will be composed of 10 members, including 6 independent members, 3 members representing the reference shareholder, Solvac, and the company CEO. They have deep expertise in specialty industries, international business operations, risk management, corporate governance, finance and clean technology.

The following individuals will serve on the SYENSQO Board of Directors:
Rosemary Thorne will serve as independent Director and Chair of the SYENSQO Board, as well as Chair of the Board’s Finance Committee. She is currently an Independent Director on the Solvay Board of Directors, appointed in 2014, and Chair of the Board’s Audit Committee. She is also an Independent Director on the Board of Merrill Lynch International (UK), a wholly-owned subsidiary of Bank of America, serving as Chair of the Audit Committee. Ms. Thorne has decades of financial leadership experience across a wide range of industries. She previously served as Chief Financial Officer at J. Sainsbury, the UK’s largest supermarket chain at the time; Bradford & Bingley; and Ladbrokes. Ms. Thorne previously sat as an Independent Director on the Boards of Royal Mail Group, Cadbury Schweppes, Santander UK, First Global Trust Bank and Smurfit Kappa Group.

Dr. Ilham Kadri will serve as Chief Executive Officer and member of the Board of Directors of SYENSQO. She is currently CEO and President of the Executive Committee at Solvay. Ms. Kadri has successfully led the turnaround of Solvay, delivering double-digit EBITDA growth and 18 consecutive quarters of positive free cash flow, deleveraging the balance sheet and promoting superior people engagement. She is an independent Board member at A.O. Smith and L’Oréal. She is active in non-profit organizations, as Chair of the World Business Council for Sustainable Development (WBCSD), member of the steering committee of the European Round Table of Industrialists (ERT) as well as a permanent member of the World Economic Forum’s International Business Council (WEF). Ms. Kadri has extensive leadership experience across a variety of industries in four continents and with leading industrial multinationals, including Shell, UCB, Huntsman, Dow, Sealed Air. Prior to Solvay, she was CEO and President of Diversey in the USA, led the company’s return to profitability and resulting spin off and divestiture to Bain Capital. She founded two non-Profit foundations: the Solvay Solidarity Fund in Belgium in 2020 which supported more than 7000 families affected by Covid-19 and natural disasters; and founded the ISSA Hygieia Network in 2015 in the USA, to help women in the cleaning industry. She received two Doctor Honoris Clausa from EWHA University in Korea and Université de Namur in Belgium.

Julian Waldron will serve as independent Director and Chair of the Audit Committee. He currently serves as Deputy Executive Chairman of privately-held Albea Group, a global beauty and personal care packaging company which operates 35 facilities in Europe, Asia and the Americas. Mr. Waldron has held senior leadership roles at several leading listed companies in the industrial, technology and services sectors and brings a wealth of expertise in finance and business operations. Prior to joining Albea in 2022, he was Chief Financial Officer of Suez for three years after serving as Chief Financial Officer and subsequently Chief Operating Officer of Technip. He started his career at UBS Warburg where he spent 14 years. Mr. Waldron also served as an independent Board member and Chairman of finance, risk and investments at Carbon Clean, a privately-owned carbon capture company dedicated to achieving net zero.

Heike Van de Kerkhof will serve as independent Director and Chair of the Nomination Committee. She currently sits on the Board of OCI N.V.. Ms. Van de Kerkhof brings more than 30 years of experience in the chemicals, oil & gas and materials industries, having served in numerous leadership roles around the globe. From 2020 to 2023, she was Chief Executive Officer of Archroma Management, a global specialty chemicals company. During her tenure, she successfully completed the transformational acquisition of Huntsman’s Textile Effects business. Prior to her role at Archroma, Ms. Van de Kerkhof served as Vice President of Lubricants, Western Hemisphere at BP, and held positions at Castrol, The Chemours Company, and Neste Corporation. She also held many leading roles within DuPont over 18 years.

Matti Lievonen will serve as independent Director and Chair of the Compensation Committee. He is currently an independent director on the Solvay Board, appointed in 2017. Mr. Lievonen is a proven executive in the energy, forestry, power and automation industries with an extensive track record of leading businesses through climate transition. For over ten years until 2018, he served as Chairman and Chief Executive Officer of Neste Corporation, a global leader in next-generation renewable fuels and chemicals. During his time at Neste, Mr. Lievonen successfully promoted the development of clean fuels as well as Finland’s bioeconomy strategy in advancing renewable transportation fuels. He has also been involved with organizations such as Fortum Board, SSAB, Nynäs AB, Ilmarinen, and the HE Finnish Fair Foundation. Until 2021, Mr. Lievonen was also Chairman of the Board of Directors at Fortum. He has been recognized for his admirable leadership and expertise, and in 2016 was awarded an Honorary Doctorate of Technology by the Aalto University Schools of Technology.

Dr. Françoise de Viron will serve as non-independent Director, Chair of the ESG Committee and Vice-Chair of the Board. She is currently a director of the Solvay Board, appointed in 2013. Ms. de Viron is a regarded academic leader and has extensive experience in innovation, R&D and qualitative research. She is a Professor Emeritus at the Faculty of Psychology and Education Sciences and Louvain School of Management at UCLouvain in Belgium where she has been an Academic Member of various groups at UCLouvain. Ms. de Viron previously served as the president of AISBL EUCEN – the European Universities Continuing Education Network. Prior to her university position, from 1985 to 2000, she was in charge of developing Artificial Intelligence applications at Tractebel S.A. (now Tractebel-Engie).

Roeland Baan will serve as independent Director. He currently serves as President and Chief Executive Officer of Topsoe, a privately-held leading provider of clean energy and petrochemical technologies. He is also Chairman of the Supervisory Board of SBM Offshore NV. Roeland Baan has extensive experience in supply chain management, M&A, business development and operations management. Prior to joining Topsoe in 2020, he was President and CEO of Outokumpu and has held several executive roles at global organizations such as Aleris International, ArcelorMittal and SHV NV. He spent over 16 years in various roles across the globe at Shell, living in South America, in Africa and in the United Kingdom.

Edouard Janssen will serve as non-independent Director. He is currently a Director on the Solvay Board, appointed in 2021. Earlier this year, he was appointed Chief Financial Officer of D’Ieteren Group, a European leader in automotive distribution services. Mr. Janssen is also a Board member of privately-held Financière de Tubize and Union Financière Boël, as well as Co-Founder and Chair of Trusted Family. Mr. Janssen is active in academics, as Vice-Chair of the International Advisory Board of the Solvay Brussels School of Economics and Management and on the advisory board of the INSEAD HGIBS. He brings expertise in finance, strategy, entrepreneurship, business management, planning and marketing. He has served as Solvay’s Vice President in strategy and M&A between 2019 and 2021, and prior to that, he was the US-based General Manager for North- and Latin America at Solvay’s Aroma Performance Global Business Unit.
 
Dr. Mary Meaney will serve as non-independent Director. She is currently a member of the Board of Directors and of the Audit Committee of Groupe Bruxelles Lambert SA. She also sits on the Board of Directors and the Remuneration Committee of Beamery, the privately-held talent management company. She is a member of the Board of Directors and of the Finance Committee of Imperial College, London.Dr. Meaney will bring expertise in Strategy, M&A, and change management, which she acquired over a 24-year career at McKinsey. She was a Senior Partner, served on the McKinsey Shareholders Council and led McKinsey’s global Organization practice.

Nadine Leslie will serve as independent Director and is based in the United States of America. She is currently a member of the Board of Directors of Provident Financial Services , as well as a Non-Executive Director of Seven Seas Water Corporation, a water and wastewater treatment multinational company. She also sits on the Board of Trustees of Hackensack Meridian Health Network and is active as strategic consultant for civil engineering firm T&M Associates. Over a 22-year career at Suez, Ms. Leslie held several leadership positions, the last one being Chief Executive Officer of Suez North America, until 2022. Previously she served as Executive Vice President Health & Safety.

More information:
Solvay Board of Directors
Source:

Solvay

11.10.2023

Toray expands French Carbon Fiber Production Facilities

Toray Industries, Inc. will expand the French subsidiary Toray Carbon Fibers Europe S.A.’s production facilities for regular tow medium- and high-modulus carbon fibers (up to 24,000 filaments). This move will increase annual capacity at the Abidos plant (South-West France) from 5,000 metric tons annually, to 6,000 metric tons. Production is expected to start in 2025.

Demand for medium- and high-modulus carbon fibers is rising in Europe, driven by a push to move towards a net-zero society. This growth is mainly due to higher build rates for commercial aircrafts (secondary structures and engines), as well as centrifuge for energy production, satellites, and high-end automobiles. By boosting carbon fiber production capacity in Europe, Toray is responding to its customers’ demand for medium and high-modulus carbon fibers, as befits the market leader.

Toray Industries, Inc. will expand the French subsidiary Toray Carbon Fibers Europe S.A.’s production facilities for regular tow medium- and high-modulus carbon fibers (up to 24,000 filaments). This move will increase annual capacity at the Abidos plant (South-West France) from 5,000 metric tons annually, to 6,000 metric tons. Production is expected to start in 2025.

Demand for medium- and high-modulus carbon fibers is rising in Europe, driven by a push to move towards a net-zero society. This growth is mainly due to higher build rates for commercial aircrafts (secondary structures and engines), as well as centrifuge for energy production, satellites, and high-end automobiles. By boosting carbon fiber production capacity in Europe, Toray is responding to its customers’ demand for medium and high-modulus carbon fibers, as befits the market leader.

Source:

Toray Industries

Akhlaq Hussain Photo OETI
Akhlaq Hussain
28.09.2023

OETI opens sales office in Pakistan

Since 1967, ‘OETI - Institute for Ecology, Technology and Innovation’ has made a name for itself worldwide as an accredited and notified centre of excellence. With decades of experience as a service provider, the company specialises in the testing and certification of textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality. As a founding member of the international OEKO-TEX® association (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company, TESTEX AG, OETI’s network of locations spans several continents. Recently, one more branch has been added in Pakistan (headquartered in Faisalabad).
OETI Pakistan is managed by Akhlaq Hussain, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management.

Since 1967, ‘OETI - Institute for Ecology, Technology and Innovation’ has made a name for itself worldwide as an accredited and notified centre of excellence. With decades of experience as a service provider, the company specialises in the testing and certification of textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality. As a founding member of the international OEKO-TEX® association (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company, TESTEX AG, OETI’s network of locations spans several continents. Recently, one more branch has been added in Pakistan (headquartered in Faisalabad).
OETI Pakistan is managed by Akhlaq Hussain, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management.

Akhlaq Hussain’s main goal is to ‘create visibility for the OETI brand in Pakistan. We want to offer sustainable, reliable, and competitive services to Pakistan’s textile industry. My aim is to foster Pakistan’s exports by offering more sustainable certifications and training in environmental and social topics as well as due diligence in supply chains, which are in high demand in European countries.’

Markus Lang’s - OETI’s Global Head of Marketing & Sales – main goal is to ‘increase the awareness of sustainability within Pakistan’s textile and leather industry, which is also the main objective of our future development.’

More information:
Pakistan OETI
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

27.09.2023

CELLIANT meets updated requirements for Class 1 Medical Devices

The European Union (EU) has upgraded the requirements for the Class 1 Medical Device designation and Hologenix®, creators of CELLIANT®, has met the stricter requirements for this important market. This means that compliant manufacturers can continue to use the CE mark on their EU products containing CELLIANT.

Brand partners simply need to comply with the requirements that Hologenix provides, and do not have to pursue regulations on their own. Regulatory status validates the science and technology behind CELLIANT, a natural blend of bioceramic minerals that absorb body heat and reflect it back as therapeutic infrared energy.

The list of products that are now registered in the EU as Class 1 Medical Devices has grown considerably since 2014 when Hologenix first sought registration and now includes bed blankets, bed sheets, duvets, duvet covers, mattresses, mattress covers, pillows, heat-reflective upper and lower torso garments, therapeutic diabetic socks, compression socks/stockings, support bandages, wraps and limb mobilization/support skin adhesive tape.  

The European Union (EU) has upgraded the requirements for the Class 1 Medical Device designation and Hologenix®, creators of CELLIANT®, has met the stricter requirements for this important market. This means that compliant manufacturers can continue to use the CE mark on their EU products containing CELLIANT.

Brand partners simply need to comply with the requirements that Hologenix provides, and do not have to pursue regulations on their own. Regulatory status validates the science and technology behind CELLIANT, a natural blend of bioceramic minerals that absorb body heat and reflect it back as therapeutic infrared energy.

The list of products that are now registered in the EU as Class 1 Medical Devices has grown considerably since 2014 when Hologenix first sought registration and now includes bed blankets, bed sheets, duvets, duvet covers, mattresses, mattress covers, pillows, heat-reflective upper and lower torso garments, therapeutic diabetic socks, compression socks/stockings, support bandages, wraps and limb mobilization/support skin adhesive tape.  

The transition to the Medical Device Regulations in the EU for CELLIANT Class 1 medical devices includes more stringent requirements to demonstrate medical device safety for users, a refined quality management system and detailed technical documents.

More information:
Hologenix Celliant medical textiles
Source:

Hologenix, LLC