From the Sector

Reset
112 results
(c) BTMA by AWOL Media
08.09.2022

Shelton Vision presents new fabric inspection technique

A new fabric inspection technique for accurately detecting the most subtle of defects on patterned fabrics during high speed production has been developed by BTMA member Shelton Vision, of Leicester, UK.

The patent-pending system has been integrated into the company’s WebSpector platform and validated through factory trials on a purpose-built full scale in-house demonstration system with sophisticated fabric transport capabilities. As a result, a first system has already been ordered by a manufacturer of both plain and patterned fabrics, including camouflage, in Colombia. This follows the successful conclusion of a 21-month Innovate UK project in which techniques for the resolution of complex pattern deformations were developed by machine vision and computer scientists in the company, backed up by the machine vision and robotics department at Loughborough University.

A new fabric inspection technique for accurately detecting the most subtle of defects on patterned fabrics during high speed production has been developed by BTMA member Shelton Vision, of Leicester, UK.

The patent-pending system has been integrated into the company’s WebSpector platform and validated through factory trials on a purpose-built full scale in-house demonstration system with sophisticated fabric transport capabilities. As a result, a first system has already been ordered by a manufacturer of both plain and patterned fabrics, including camouflage, in Colombia. This follows the successful conclusion of a 21-month Innovate UK project in which techniques for the resolution of complex pattern deformations were developed by machine vision and computer scientists in the company, backed up by the machine vision and robotics department at Loughborough University.

Restrictions
Traditional methods for defect detection rely on human inspection which is ineffective, with detection rates under 65%, while the Shelton WebSpector machine vision system offers a sophisticated platform for automated defect detection of over 97%, but until now has been restricted to plain textiles.

While pattern matching and neural network approaches have previously been tried for patterned textiles, they have failed to provide a practical solution due to the extreme complexity associated with pattern matching on deformable substrates like textiles, as well as the time required to train a neural network for each pattern type.

Challenges
The challenge is that fabrics are not rigid and can be creased or stretched and are also subject to local distortion,” says Shelton Vision Managing Director and CEO Mark Shelton. “As a result, inspection without the technique we have developed, would lead to thousands of false positives. Our sophisticated pattern inspection software techniques ensure a clean image, allowing the detection of faults on fabrics running at speeds of up to a hundred metres a minute.”

The full system consists of:

  • A camera and lighting system for optimum image capture at high speed and associated image processing hardware.
  • Self-training software utilising statistical analysis to automate the system configuration for new textile products.
  • An advanced suite of defect detection algorithms for the detection of all textile defect types.
  • An AI-driven defect classification system which learns and automates defect naming in real time, as well as a real time defect grading capability based on client decision rules.
  • A system for recording and retrieving complete roll map images for subsequent review and quality control.

The generation of textile roll maps with complete defect data allows for an optimised textile cut plan, improved downstream processing and quality assurance.

Source:

BTMA by AWOL Media

21.07.2022

Kornit Digital: New Virtual Tradeshow at Printing Expo Online 2022

Kornit Digital Ltd. (NASDAQ: KRNT) (“Kornit”), a worldwide market leader in sustainable, on-demand digital fashionx  and textile production technologies, has opened the doors to a new interactive booth  at one of the world’s largest virtual printing tradeshows – Printing Expo Online 2022. The exhibit offers all the benefits of a physical tradeshow, but with convenient, online access any time.

Printing Expo Online is one of the most popular online tradeshows for the printing industry. Tailored to meet the demands of evolving businesses, the show is open 24-7-365 days a year – and has welcomed over 60,000 global visitors since November 2020. Kornit’s virtual exhibit is fully aligned with customer requests for a more flexible tradeshow experience – allowing participation at their convenience.

Kornit Digital Ltd. (NASDAQ: KRNT) (“Kornit”), a worldwide market leader in sustainable, on-demand digital fashionx  and textile production technologies, has opened the doors to a new interactive booth  at one of the world’s largest virtual printing tradeshows – Printing Expo Online 2022. The exhibit offers all the benefits of a physical tradeshow, but with convenient, online access any time.

Printing Expo Online is one of the most popular online tradeshows for the printing industry. Tailored to meet the demands of evolving businesses, the show is open 24-7-365 days a year – and has welcomed over 60,000 global visitors since November 2020. Kornit’s virtual exhibit is fully aligned with customer requests for a more flexible tradeshow experience – allowing participation at their convenience.

The multi-story showroom makes it possible to self-navigate across Kornit’s game changing single-step, digital direct-to-garment (DTG) and direct-to-fabric (DTF) solutions – unlocking new possibilities for on demand, sustainable digital fashion and textile production. Solutions on display include  Kornit Atlas MAX, the recently introduced Kornit Atlas MAX Poly, Kornit Presto MAX and the KornitX Workflow offering.

Source:

Kornit Digital

Photo: ACIMIT
13.07.2022

Italian textile machinery sector returning to pre-Covid levels

  • Annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers

  • Digitalization and Sustainability Key to Resiliency for Italian Textile Machinery Sector

The objective critical issues faced by Italy as a whole throughout the course of 2021, primarily dictated by a pandemic that upset any and all pre-existing equilibriums, have not slowed or halted the Italian textile machinery sector.

Indeed, data presented during the annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers, held on 1 July proved decidedly positive, showing that in 2021 the sector recovered significantly compared to 2020, to the point of returning to pre-Covid levels.

Specifically, Italian textile machinery production amounted to 2.388 billion euros (+35% over 2020 and + 5% over 2019), with total exports amounting to 2.031 billion euros (+37% over 2020 and +9% over 2019).

  • Annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers

  • Digitalization and Sustainability Key to Resiliency for Italian Textile Machinery Sector

The objective critical issues faced by Italy as a whole throughout the course of 2021, primarily dictated by a pandemic that upset any and all pre-existing equilibriums, have not slowed or halted the Italian textile machinery sector.

Indeed, data presented during the annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers, held on 1 July proved decidedly positive, showing that in 2021 the sector recovered significantly compared to 2020, to the point of returning to pre-Covid levels.

Specifically, Italian textile machinery production amounted to 2.388 billion euros (+35% over 2020 and + 5% over 2019), with total exports amounting to 2.031 billion euros (+37% over 2020 and +9% over 2019).

However, these results do not cancel the obstacles that companies are still facing. Looking to the near future, expectations are for a rather uncertain outlook, as underscored by ACIMIT President Alessandro Zucchi: “2022 remains a year replete with unknown factors, starting with the Russian-Ukrainian conflict, along with the persistence of the pandemic, which seriously risk delaying expected growth consolidation for businesses in the sector. Difficulties in finding raw materials and components negatively affect the completion and fulfilment of orders processed as far back as 2021. To boot, rising energy costs and inflationary trends affecting numerous commodities are depressing overall business confidence. So the outlook for the sector is not so good.”
As such, the two cornerstones through which ACIMIT aims to support the Italian textile machinery sector are digitilization and sustainability.

4.0: The textile machinery sector looks to the future
The road to digital transformation has already led numerous manufacturers to completely rethink their production processes, rendering them more efficient and l ess expensive. The digital world is moving ahead at a decisive rate in the textile machinery sector, where the buzzwords are increasingly, for instance, the Internet of Things connecting to a company’s ecosystem, machine learning algorithms applied to production, predictive maintenance, and the integrated cloud management of various production departments. It is no coincidence that ACIMIT has focused decisively on its Digital Ready project, through which Italian textile machinery that adopt a common set of data are certified, with the aim of facilitating integration with the operating systems of client companies (ERP, MES, CRM, etc.).

A green soul
Combining production efficiency and respect for the environment: a challenge ACIMIT has made its own and which it promotes among its members through the Sustainable Technologies project. Launched by the association as early as 2011, the project highlights the commitment of Italian textile machinery manufacturers in the area of sustainability. At the heart of the project is the Green Label, a form of certification specifically for Italian textile machinery which highlights its energy and environmental performance. An all-Italian seal of approval developed in collaboration with RINA, an international certification body.
The assembly held on 1 July provided an opportunity to take stock of the Sustainable Technologies project, more specifically, with the presentation of the Rina Consulting survey on the Green Label’s evolution and impact in recent years.

The results have confirmed the initiative’s extreme validity. The technological advances implemented by the association’s machinery producers participating in the project have effectively translated into benefits in terms of environmental impact (reduction of CO2 equivalent emissions for machinery), as well as economic advantages for machinery users.

With reference to the year 2021, a total of 204,598 tons of CO2 emissions avoided on an annual basis have been quantified, thanks to the implementation of improvements on machinery. This is a truly significant reduction which, for the sake of comparison, corresponds to the carbon dioxide emissions generated by 36,864 automobiles travelling an average of 35,000 km a year. In terms of energy savings, the use of green labeled textile machinery has provided excellent performances in allowing for a reduction of up to 84% in consumption.

A round table discussion on the Green Label’s primary purpose
The environmental and economic impact generated in production processes for Italian textile machinery through the use of Green Label technologies was the focus of the round table which concluded the ACIMIT assembly.

Moderated by Aurora Magni (professor of the Industrial Systems Sustainability course at the LIUC School of Engineering), the debate involved Gianluca Brenna (Lipomo Printing House administrator and Vice President of the Italian Fashion System for Welfare), Pietro Pin (Benetton Group consultant and President of UNI for the textile-clothing area), Giorgio Ravasio (Italy Country Manager for Vivienne Westwood), as well as ACIMIT President Alessandro Zucchi.

Called on to compare common factors in their experiences relating to environmental transition processes for their respective companies, the participants were unanimous: the future of Italian textile machinery can no longer ignore advanced technology developments capable of offering sustainable solutions with a low environmental impact while also reducing production costs. This philosophy has by now been consolidated, and has proven to lead directly to a circular economy outlook.

The upcoming ITMA 2023 exhibition
Lastly, a word on ITMA 2023, the most important international exhibition for textile machinery, to be held in Italy from 8 to 14 June 2023 at Fiera-Milano Rho. Marking the 19th edition of ITMA, this trade fair is an essential event for the entire industry worldwide, providing a global showcase for numerous innovative operational solutions on display. A marketplace that offers participants extraordinary business opportunities. The participation of Italian companies is managed by ACIMIT.

Photo: © 2022, Steiger Participations
11.07.2022

Swiss Textile Machinery technology and innovations for technical textiles

New ideas were exchanged, brainstormed, and discussed freely at members’ booths at the Swiss Textile Machinery Pavilion during the recent Techtextil in Frankfurt. “Customers and researchers met Swiss textile machinery companies to explore the possibility of the not-yet-invented. “We regard our Pavilion as the place where future innovations catch a spark,” says Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association. Further developments in the field of hybrid yarns were a hot topic. One example of this involves producing a yarn which has all the typical characteristics and advantages of carbon – but which also prioritizes careful use of resources, combining carbon fibres with thermoplastics.

Technical textiles cover a vast range of applications, and it’s still growing thanks to intensive research by specialist institutes and universities. Many members of the Swiss Textile Machinery Association maintain long-standing partnership with such bodies. Innovations are often joint efforts.

New ideas were exchanged, brainstormed, and discussed freely at members’ booths at the Swiss Textile Machinery Pavilion during the recent Techtextil in Frankfurt. “Customers and researchers met Swiss textile machinery companies to explore the possibility of the not-yet-invented. “We regard our Pavilion as the place where future innovations catch a spark,” says Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association. Further developments in the field of hybrid yarns were a hot topic. One example of this involves producing a yarn which has all the typical characteristics and advantages of carbon – but which also prioritizes careful use of resources, combining carbon fibres with thermoplastics.

Technical textiles cover a vast range of applications, and it’s still growing thanks to intensive research by specialist institutes and universities. Many members of the Swiss Textile Machinery Association maintain long-standing partnership with such bodies. Innovations are often joint efforts.

Feel-good technical fabrics
Some technical textiles feel like a second skin. A well-known example is activewear from the ‘sport tech’ field. Activewear includes breathable clothing, usually consisting of a three-layer-laminate: an inner lining, a breathable membrane in the center, and an outer fabric. The challenge is to bond the individual layers without losing breathability or softness, while meeting technical requirements such as resistance to a number of wash cycles.

Bonding solutions meeting top quality requirements, as well as ambitious standards for environmental protection and sustainability, were reinvented by the Cavitec brand from the Santex Rimar Group. This company’s hotmelt technology uses one-component polymers applied to textiles in a hot, molten state. Bonding based on hotmelts is both water- and solvent-free. Drying and exhaust air cleaning are not necessary, which is an ecological advantage. Energy consumption is also significantly lower. Cavitec hotmelt technology is also developed for laminated medical protection fabrics which are safe, high-quality and sustainable. These fabrics can be washed, sterilized, and used again.   

A second skin with added value is the result of Jakob Müller Group’s cooperation with an institute for an established outdoor fashion brand. They have devised a heating mat applied as an inner jacket. Outdoor gear with a heated inlay offers the wearer a comfortable feeling even in a cold climate. The heating mat is particularly light, breathable, flexible and adjustable to three temperature levels.

Fabrics with these advantages are now possible thanks to multi direct weaving (MDW) technology from the Jakob Müller Group. A lacquer-insulated heating strand is inserted into the base textile as a ‘meander’ using MDW technology. The technology is offered with both label weaving machines and the latest generation of ribbon weaving machines. The textile pocket calculator is another MDW based future-oriented application developed in cooperation with a textile research institute.

Safety and health
Life-saving reliability is a must for vehicle airbags. They have to fulfil high security aspects, and must remain inflated for several seconds when an accident occurs. Airbags made of flat-woven fabric – cut and seamed – can show weakness at seams during the inflation phase. Latest Jacquard technology by Stäubli enables one-piece-woven (OPW) airbags to be produced, creating shape and structure in a single process. The final product is an airbag consisting of a sealed cushion with woven seams. OPW airbag weaving reduces the number of production steps, and increases the security aspects.
Another big advantage of Stäubli’s new weaving technology is the flexibility in formats required in today’s mid- and upper-range cars, where lateral protection (in the seat or in the roof over the door) has become standard and is designed in line with the car shape. Safe airbags are woven on modern high-speed weaving machines. The warp material, the variety of fabric patterns, and the importance of precisely shaped airbags require the use of a robust and reliable Jacquard machine.

A revolution for orthopaedic patients is a knitting machine from Steiger Participations, which uses compressive yarns developed to meet the needs of the specific health market. This machine model was exclusively designed for production with inlaid elastic yarns and offers optimum performance with guaranteed final product quality.

In the orthopaedic field, many Steiger flat knitting machines have already been operating as automatic, custom-made production systems. For example, the dimensions of an injured limb are taken by the doctor and fed into a web-based application. The doctor selects the compression class in the various sections of the item and a data file created by the software automatically applies a preconfigured program. With no human intervention required, the program is generated and produced on the machine, precisely matching the patient’s dimensions. Each product is different, and generally available within 48 hours.

08.07.2022

Swedish textile machinery in Brazil at Febratex

A delegation from TMAS, the Swedish textile machinery association, will participate in the forthcoming Febratex textile show which is being held in the German Village Park in Blumenau, in Santa Catarina, Brazil from August 23-26.

As the fourth largest textiles manufacturer in the world, Brazil’s annual revenues from textiles and apparel amount to an annual $48 billion and the industry employs around 1.5 million people directly.

As with the USA and many European countries, product shortages resulting directly from the Covid-19 pandemic, and subsequent supply chain difficulties, have emphasised to Brazil’s industry the attractiveness of more diversified and shorter supply chains which are closer to customers wherever possible. In the past two years, there has been less reliance on imports from Asia to Brazil, and opportunities are arising again for local manufacturing.

Svegea of Sweden has supplied many automatic collarette cutters to Brazilian companies, which are used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements.

A delegation from TMAS, the Swedish textile machinery association, will participate in the forthcoming Febratex textile show which is being held in the German Village Park in Blumenau, in Santa Catarina, Brazil from August 23-26.

As the fourth largest textiles manufacturer in the world, Brazil’s annual revenues from textiles and apparel amount to an annual $48 billion and the industry employs around 1.5 million people directly.

As with the USA and many European countries, product shortages resulting directly from the Covid-19 pandemic, and subsequent supply chain difficulties, have emphasised to Brazil’s industry the attractiveness of more diversified and shorter supply chains which are closer to customers wherever possible. In the past two years, there has been less reliance on imports from Asia to Brazil, and opportunities are arising again for local manufacturing.

Svegea of Sweden has supplied many automatic collarette cutters to Brazilian companies, which are used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements.

Svegea supplies many other bespoke machines for applications in the production of both garment components and technical textiles, including rewinding, measuring, inspection and band knife machines.

Eton Systems, the inventor and world’s leading provider of automated production systems for apparel and other textile-based processes, has supplied a large amount of workstations to Brazilian companies over the years, and believes its newly-launched Opta system is good news for this market becoming more efficient and profitable.

Automation is also high on the agenda of ACG Kinna Automatic, which specialises in automation solutions for filled products such as quilts, pillows and mattresses and also has extensive knowledge in areas such as bed linen and textile filters.

Given Brazil’s extensive forestry sector, the country is a key market for Texo AB, one of the world’s leading manufacturers of weaving machines for the production of paper machine clothing (PMC).

All paper manufacturing machines require a regular supply of PMC, which as large continuous engineered fabrics, carry the paper stock through each stage of the paper production process. With technologically sophisticated designs, they employ fibres and other polymeric materials in complex structures and each paper machine has an average of ten separate fabrics installed on it. Although the PMC business represents just a small proportion of the total cost of manufacturing paper, it can have a significant impact on the quality of the paper, the efficiency of a machine and machine production rates.

More information:
TMAS Febratex
Source:

AWOL Media

(c) A. Monforts Textilmaschinen GmbH & Co. KG
07.07.2022

Monforts: New orders for machines at Techtextil 2022

The recent Techtextil show in Frankfurt emphasised the diversity of applications for nonwovens and technical textiles, according to finishing technology specialist Monforts.

“We fielded enquiries at top management level from an extremely wide range of companies, all with very different ideas for new product applications during the show,” said Alexander Fitz, who joined the company a year ago as engineer for textile technologies and co-ordinator of the Monforts Advanced Technology Centre (ATC). Fitz brings a background in both technical textile technology and processes to the role, having previously worked for a nonwovens machinery builder and a roll-goods manufacturer.

The recent Techtextil show in Frankfurt emphasised the diversity of applications for nonwovens and technical textiles, according to finishing technology specialist Monforts.

“We fielded enquiries at top management level from an extremely wide range of companies, all with very different ideas for new product applications during the show,” said Alexander Fitz, who joined the company a year ago as engineer for textile technologies and co-ordinator of the Monforts Advanced Technology Centre (ATC). Fitz brings a background in both technical textile technology and processes to the role, having previously worked for a nonwovens machinery builder and a roll-goods manufacturer.

Trials
“We are now looking forward to interesting new trials and pilot production runs, as well as the commissioning of new orders for machines resulting from the extremely busy exhibition,” he says. “Obviously, everyone at the moment is looking to make energy savings, and we have developed a range of options for helping companies increase their resource efficiency, both on new lines and as retrofitted systems, but this is not stifling innovation at the new material level.

“There was a lot of interest in what is possible with the Montex®Coat coating system and the range of different techniques it enables, and at our ATC in Mönchengladbach, a Montex®Coat unit is integrated into the full technical textiles pilot line, on which it is possible to run new fabrics in widths of up to 1.8 metres.”

Explosion proof
The technical textiles line at the ATC incorporates a Montex four-chamber stenter and is fitted with an explosion-proof coating application chamber in order to allow treatment to be carried out with organic solvents and other volatile materials.

Every single component within the chamber has to meet the standards of the European Union’s ATEX directives for working in a potentially explosive atmosphere. A range of sensors linked to alarms operate at various levels within the chamber to ensure the specified lower explosion limit (LOL) is never exceeded and the ventilation adapts accordingly.

Advanced functions
Special features on the finishing line relate to further advanced functions such as the ability to treat materials not only at temperatures of up to 320°C, but also to be able to treat the top and bottom faces of certain materials at different temperatures within a single pass through the machine.

To achieve this, the first two chambers of the stenter are fitted with special, heavy duty TwinAir ventilation motors and separate burners for individual top/bottom temperature. A temperature differential of up to 60°C can be achieved between the upper and lower nozzles within the chamber, depending on the treatment paramenters.

Another key feature of the technical textiles line at the ATC is the special stretching device which is capable of pulling ten tons in length and ten tons in width – a huge amount per square metre of fabric and necessary in the production of materials such as woven or 3D knits for high temperature filter media.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

05.07.2022

EFI Fiery acquires Provider of Production and Design Workflow Software

Fiery®, the digital front end (DFE) and workflow business of EFI, announced that it has acquired CADlink® Technology Corp., a software company that delivers solutions for the high growth areas of digital direct-to-garment (DTG) and direct-to-film (DTF) printing; digital cutting and engraving; digital wide-format print; and vehicle wraps. CADlink’s products address increasingly important customer needs for customization and personalization, and for reducing the time spent moving work from design to production.

CADlink is a global software company that serves markets that require unique workflows involving different types of production devices. CADlink’s products are recognized leaders in design, RIP and workflow technology, and are sold globally to customers through OEM partners and an extensive network of resellers. CADlink’s products, partners and channels are a natural complement to what the Fiery business delivers for its global commercial, display graphics and industrial printing customer base.  

The CADlink software portfolio includes proven, advanced solutions that support the development and growth of e-commerce for custom-manufactured products.

Fiery®, the digital front end (DFE) and workflow business of EFI, announced that it has acquired CADlink® Technology Corp., a software company that delivers solutions for the high growth areas of digital direct-to-garment (DTG) and direct-to-film (DTF) printing; digital cutting and engraving; digital wide-format print; and vehicle wraps. CADlink’s products address increasingly important customer needs for customization and personalization, and for reducing the time spent moving work from design to production.

CADlink is a global software company that serves markets that require unique workflows involving different types of production devices. CADlink’s products are recognized leaders in design, RIP and workflow technology, and are sold globally to customers through OEM partners and an extensive network of resellers. CADlink’s products, partners and channels are a natural complement to what the Fiery business delivers for its global commercial, display graphics and industrial printing customer base.  

The CADlink software portfolio includes proven, advanced solutions that support the development and growth of e-commerce for custom-manufactured products.

“Becoming part of the EFI Fiery business will extend the geographic reach for our products and enhance our ability to support and drive greater value to customers and partners worldwide,” said CADlink Co-founder and CEO Gordon Reynen.

Source:

EFI

ANDRITZ Nonwoven Wetlace CP-Linie Photo: Andritz
28.06.2022

ANDRITZ: First nonwovens pilot line for wipes with integrated wetlaid pulp process

International technology group ANDRITZ has established a new inline Wetlace™ CP pilot line with an original design at its center of competence in Montbonnot, France. The line combines both spunlace and wetlaid technologies.

From now on, partners will be able to conduct trials and test all options available for wipes production – from carded staple fibers to pulp and various combinations thereof. The combination of both spunlace and wetlaid technologies offers to move forward to more sustainable options while maintaining a high level of product quality, in particular by achieving high CD strength and good linting properties.

Over the past few decades, ANDRITZ has continued to innovate with various nonwoven processes, like spunlace, WetlaceTM and Wetlace™ CP, with the aim of optimizing the use of raw materials and focusing on sustainability by reducing the synthetic fiber content. Facing the growing demand for bio-wipes in parallel with enforcement of the EU’s single-use plastics directive last year, ANDRITZ has decided to support its customers making their investment decisions.

International technology group ANDRITZ has established a new inline Wetlace™ CP pilot line with an original design at its center of competence in Montbonnot, France. The line combines both spunlace and wetlaid technologies.

From now on, partners will be able to conduct trials and test all options available for wipes production – from carded staple fibers to pulp and various combinations thereof. The combination of both spunlace and wetlaid technologies offers to move forward to more sustainable options while maintaining a high level of product quality, in particular by achieving high CD strength and good linting properties.

Over the past few decades, ANDRITZ has continued to innovate with various nonwoven processes, like spunlace, WetlaceTM and Wetlace™ CP, with the aim of optimizing the use of raw materials and focusing on sustainability by reducing the synthetic fiber content. Facing the growing demand for bio-wipes in parallel with enforcement of the EU’s single-use plastics directive last year, ANDRITZ has decided to support its customers making their investment decisions.

The Montbonnot pilot line has been rebuilt to integrate the new headbox inside the spunlace line. Pulp can be fed in directly and entangled with carded staple fibers to produce unique nonwoven fabrics designed for end uses as bio-wipes.

Source:

Andritz

(c) SHIMA SEIKI MFG., LTD.
14.06.2022

SHIMA SEIKI to exhibit at Techtextil 2022 in Frankfurt

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, along with its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will be participating in the Techtextil exhibition in Frankfurt, Germany from the 21st till the 24th of June 2022.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, along with its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will be participating in the Techtextil exhibition in Frankfurt, Germany from the 21st till the 24th of June 2022.

On display will be SHIMA SEIKI’s latest innovation in flat knitting technology as applied to the field of technical textiles—a prototype weft knitting machine capable of multi-axial yarn insertion. Fabrics produced on this machine use inlay technique for the production of hybrid textiles that combine the stretch characteristics of knitted fabrics with the stability of woven textiles, suited to various technical applications. To this, warp yarn is inserted to further expand its capability to produce 3D-shaped carbon fiber and composite preforms directly on the machine. This is made possible by taking advantage of the fact that flat knitting as a textile production method is capable of producing end products that are shaped-to-form and with added thickness. Compared to current methods of preform production, savings in post-processing time, material, labor and associated costs are immense, realizing efficient and sustainable production. SHIMA SEIKI’s own yarn unwinding technology is also used for optimum yarn feed and tension for use with technical yarns that are otherwise difficult to knit. Industrial textile samples knit on the multi-axial machine will also be available for examination on-site.

SHIMA SEIKI's SDS®-ONE APEX4 3D design system will be available for demonstrations as well. Of particular interest should be its ultra-realistic simulation capability that realizes Virtual Sampling. When countless variations must be evaluated before arriving at a final design, virtual product samples can be used to streamline the decision-making process by minimizing the enormous amount of time, cost and material normally associated with producing actual samples for each variation. When approved, the same data can be converted to machine data for immediate knitting, significantly reducing lead times.

20.05.2022

DiloGroup at ITM + Hightex 2022

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

DiloGroup will inform about complete lines as well as high speed needlelooms for spunbonds. A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further. The new needle pattern 8000X is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

Another strong pillar of the sales program over decades has been fibre preparation and high speed webforming equipment for other nonwoven technologies. The further development of the high-speed layering principle “Hyperlayer” made progress for better CD strength through a combination of inline cards and crossline card with crosslapper. Particularly, carding machines in a working width above 3.5 m up to 5.1 m have been supplied by DiloSpinnbau as complete high speed carding systems, comprising two or even three cards in a line to directly feed the hydroentangling units of various suppliers. Together with DiloTemafa not only have high throughput rates been achieved in the fibre preparation section of the line but also dedusting filtering and air-conditioning systems have been successfully engineered and integrated.

Together with Sicam, Dilo has combined know-how for hydroentangling technology and therefore can provide complete lines as general contractor including equipment for cutting, winding and packaging.

Another interesting machine is the 3D-Lofter, first presented during ITMA 2019 in Barcelona, which offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts with or without repeat are two examples for this technology which explores new application areas for needlefelts.
The 3D-Lofter technology may also be used “inverted” as “IsoFeed” for filling up bad spots in web mats and thus achieves a better homogeneity of spunlace or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

More information:
DiloGroup ITM Hightex nonwovens
Source:

DiloGroup

Advances in automation from Svegea at Texprocess 2022 (c) Svegea
With Svegea bias cutters, circular woven technical fabrics are fed via a revolving winder and slit at angles.
18.05.2022

Advances in automation from Svegea at Texprocess 2022

  • Svegea, a member of TMAS, the Swedish textile machine association, is marking a company milestone this year at Texprocess in Frankfurt from June 21-24  – the 70th anniversary of its automatic collarette cutter.

 On its introduction back in 1952, this machine – used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements – caused a sensation with its then-unprecedented output of 300 metres per hour.

Time doesn’t stand still, however, and the latest EC 300 machine Svegea will demonstrate at Texprocess 2022 has a slightly improved output – of around 20,000 metres per hour.

  • Svegea, a member of TMAS, the Swedish textile machine association, is marking a company milestone this year at Texprocess in Frankfurt from June 21-24  – the 70th anniversary of its automatic collarette cutter.

 On its introduction back in 1952, this machine – used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements – caused a sensation with its then-unprecedented output of 300 metres per hour.

Time doesn’t stand still, however, and the latest EC 300 machine Svegea will demonstrate at Texprocess 2022 has a slightly improved output – of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy show in Frankfurt and a busy year,” says Svegea Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations wherever they are, and at the moment we’re seeing a lot of interest in the reshoring of operations by our customers, to bring final-stage manufacturing closer to the key European and US markets.”

E-Drive 2
The EC 300 collarette cutter on show in Frankfurt is equipped with the latest E-Drive 2 system providing the operator with a very user-friendly touchscreen, providing full control of the cutting process.

The integrated, fully automatic FA500 roll slitter accommodates diameters up to 400mm and is equipped with three separately adjustable settings enabling three different band widths to be cut within the same cutting cycle. Automatic tube sewing units are provided for sewn tubes in optional rolled or flat folded forms, depending on customer preference.

Niche applications
Svegea supplies many other bespoke machines for applications in the production of both garment components and technical textiles, including rewinding, measuring, inspection and band knife machines.

The ability to produce tubular fabric which is cut on the bias allows customers to provide textiles which not only have improved drape and elasticity properties for complex and intricate shapes, but also offer ways to reduce production costs by eliminating unnecessary wastage from the manufacturing process. Pre-cutting the fabric to a specific bias reduces extra handling of the fabric in further processes, saving customers both valuable production time and costs.

Source:

AWOL Media on behalf of TMAS

(c) Ralph Koch for Mayer & Cie
29.04.2022

Mayer & Cie. launches upgrade kits for existing circular knitting machines

This month, the circular knitting machine manufacturer Mayer & Cie. is launching its upgrade kits for circular knitting machines that are already successfully in use by customers. With tailor-made packages, the company wants to give its users the opportunity to take advantage of technological progress in their existing machines. The aim is to improve the performance of the existing machines and to extend their service life. In addition to the machine-specific upgrade kits, the company now starts offering tailormade spare parts packages. They are intended to ensure machine availability and equip customers with spare parts for standard situations. In addition, they offer a degree of independence from possible failures in the supply chain and rising transport costs.

Longevity, a popular product property
“Longevity of our circular knitting machines is definitely a property that our satisfied customers mention regularly”, Mayer & Cie. sales director Wolfgang Müller says. The company estimates that up to 50 percent of all the circular knitting machines it has ever made are still around in the market somewhere.

This month, the circular knitting machine manufacturer Mayer & Cie. is launching its upgrade kits for circular knitting machines that are already successfully in use by customers. With tailor-made packages, the company wants to give its users the opportunity to take advantage of technological progress in their existing machines. The aim is to improve the performance of the existing machines and to extend their service life. In addition to the machine-specific upgrade kits, the company now starts offering tailormade spare parts packages. They are intended to ensure machine availability and equip customers with spare parts for standard situations. In addition, they offer a degree of independence from possible failures in the supply chain and rising transport costs.

Longevity, a popular product property
“Longevity of our circular knitting machines is definitely a property that our satisfied customers mention regularly”, Mayer & Cie. sales director Wolfgang Müller says. The company estimates that up to 50 percent of all the circular knitting machines it has ever made are still around in the market somewhere.

Upgrades boost performance and value
Value retention, maintenance and upgrades for existing machines are a key issue for the company – and for the customers who successfully use existing Mayer & Cie equipment. That’s why the company recently launched customised upgrade kits to improve the long-term performance of machines.

Low budget, clear benefit
Compared to a new machine, upgrade kits are a low-cost investment that deliver clearly defined benefits. For example, an improved yarn guide ensures a significant increase in the plating reliability and output of the machine in question.

Most of the upgrade kits is machine-specific; the aforementioned yarn guide ensures a boost in productivity for the Relanit 3.2 II and Relanit 3.2 S. For S4 machines an optimised fluff blowing device can be the solution. It ensures that less fluff is knitted in and thereby improves the fabric quality. It also reduces downtimes that would otherwise be required for cleaning. Upgrade kits suitable for most Mayer & Cie. machines are the edge trimmer to open a fabric hose before the fabric’s rolling-up and the laying facility for high-quality hose fabric.

Spare part packages: Inside is what is required
In addition to individual upgrade kits Mayer & Cie. now offers spare parts packages. They too are customised for individual machines. When purchasing a machine, the customer can also order a small or a large spare parts package. Selected specially for the machine in question, it contains the most important consumables and spare parts.
The new spare parts packages also increase customers’ independence of supply chain failures and rising transport costs.

Source:

Mayer & Cie GmbH & Co. KG

(c) SHIMA SEIKI MFG., LTD.
25.04.2022

SHIMA SEIKI to Exhibit at JEC World 2022

Leading Japanese textile solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan will exhibit at the upcoming JEC World 2022 exposition to be held in Paris, France next month.

On display will be the P-CAM®131 multi-ply computerized cutting machine (NC cutting machine). SHIMA SEIKI's fast, efficient and reliable P-CAM® series computerized cutting machines are known for their innovative functions and Made-in-Japan quality, and boast the largest market share in Japan. At JEC World P-CAM®131 is shown in its most compact form, featuring a cutting area of 1,300 mm x 1,700 mm, with option for expansion. Its multi-ply cutting capability allows up to 1 inch (33mm) of fabric or material to be cut. A knife sharpening system produces a sharp, strong blade every time. Strong, robust components permit quicker response times for knife movement and more accurate cutting composites and other industrial materials. The P-CAM® lineup is ideally suited to global production in a wide range of industrial applications in addition to apparel and textiles.

Leading Japanese textile solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan will exhibit at the upcoming JEC World 2022 exposition to be held in Paris, France next month.

On display will be the P-CAM®131 multi-ply computerized cutting machine (NC cutting machine). SHIMA SEIKI's fast, efficient and reliable P-CAM® series computerized cutting machines are known for their innovative functions and Made-in-Japan quality, and boast the largest market share in Japan. At JEC World P-CAM®131 is shown in its most compact form, featuring a cutting area of 1,300 mm x 1,700 mm, with option for expansion. Its multi-ply cutting capability allows up to 1 inch (33mm) of fabric or material to be cut. A knife sharpening system produces a sharp, strong blade every time. Strong, robust components permit quicker response times for knife movement and more accurate cutting composites and other industrial materials. The P-CAM® lineup is ideally suited to global production in a wide range of industrial applications in addition to apparel and textiles.

Also available for video display will be SHIMA SEIKI’s latest innovation in flat knitting technology as applied to the field of technical textiles—a prototype weft knitting machine capable of multi-axial yarn insertion. Fabrics produced on this machine use inlay technique for the production of hybrid textiles that combine the stretch characteristics of knitted fabrics with the stability of woven textiles, suited to various technical applications. To this, warp yarn is inserted to further expand its capability to produce 3D-shaped carbon fiber and composite preforms directly on the machine. This is made possible because flat knitting as a textile production method is capable of producing end products that are shaped-toform and with added thickness. Therefore, savings in post-processing time, cost, material and labor as compared to current methods of preform production are immense, realizing efficient and sustainable production. SHIMA SEIKI’s own yarn unwinding technology is also used for optimum yarn feed and tension for use with technical yarns that are otherwise difficult to knit. Industrial textile samples knit on the multi-axial machine will also be available for examination on-site.

Source:

SHIMA SEIKI MFG., LTD.

(c) Eton
22.04.2022

More localised and automated textile manufacturing with TMAS technologies

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

Secure supply
At Texprocess, for example, Eton Systems will be unveiling its latest Ingenious software solution which further enhances the company’s Opta Unit Production System (UPS) introduced in 2021.

“Our automated technology has already had a great impact on the productivity of thousands of garment production lines,” says Eton’s Managing Director Jerker Krabbe. “Our systems help producers across the world to reduce repetitive manual tasks and increase efficiency, which evens out some of the differences between production in high and low-cost countries, making reshoring a feasible option. Creating a diversified production portfolio with a mix of production facilities, some closer to home, makes for a more secure product supply.”

Flexibility
Imogo meanwhile recently installed the first industrial scale dyeing system in Sweden for many years. The Dye-Max spray dyeing line has the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. It is capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing users with unbeatable flexibility in production.

“Here in Scandinavia, we are currently seeing an explosion of companies developing sustainable new cellulosic fibres – many from waste clothing – but a problem is that all of the environmental benefits they deliver can potentially be lost in the further processing, and especially in conventional dyeing,” observes the company’s Founding Partner Per Stenflo. “The Dye-Max system positively addresses this, but interest in it has not just been confined to Europe. We are currently seeing a lot of activity in Turkey – largely as a near-shore partner to European brands – but also in Bangladesh.”

Robotics at Heimtextil
ACG Kinna Automatic specialises in automation solutions for filled products such as quilts, pillows and mattresses and its live demonstrations of robotics in action have proved a magnet for visitors to Heimtextil. This year’s show will be no exception.

“The use of robotics is now standard across many industries dealing in solid goods, but the handling of soft materials such as textiles is a little more complex,” says Managing Director Christian Moore. “Nevertheless, it’s something we have successfully mastered, and our robotic systems are proving highly beneficial to their users. There is no ‘one-size-fits-all’ solution when it comes to automation and our approach is always to carefully examine where it will make the difference in each bespoke system. A focus is on identifying and eliminating bottlenecks which will increase product flows.”

During the Covid-19 pandemic, ACG Kinna drew on all of its automation know-how and extensive network of contacts to build a new nonwovens fabric converting and single-use garment making-up plant in a matter of weeks, in order to supply the Swedish authorities with urgently-needed medical gowns.

Instant colour
Localised textile production is also booming in the USA, where Coloreel has recently secured multiple orders for its instant thread colouration technology via its US partner Hirsch.

“Coloreel technology enables the high-quality and instant colouring of a textile thread while it is actually being used in production and can be paired with any existing embroidery machine without modification, while also making it possible to produce gradients in an embroidery for the first time,” explains VP of Sales Sven Öquist.

“Advanced rapid colour formulation software and high-speed drive technology allow a single needle to carry out what it previously required many multiples of them to do – and with much more consistent stitch quality. By instantly colouring a recycled white base thread during production, our system enables complete freedom to create unique embroideries without any limitations. Colour changes along the thread can either be made rapidly from one solid colour to another, or gradually, to make smooth transitions or any colouring effect desired. This provides big benefits when it comes to sustainability and design creativity.”

Milestone
Svegea will be promoting its latest EC 300 collarette cutting machine at Texprocess 2022. This machine is used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements. With its E-Drive 2 system and fully automatic FA500 roll slitter, the EC 300 has an output of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy year,” says Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations, wherever they are.”

Sensors
The advanced yarn tension monitoring technologies of Eltex of Sweden meanwhile play an essential role in rectifying defects in  weaving, tufting and composite reinforcement operations.

“A correct tension of the warp and weft threads ensures proper machine operation,” explains Eltex Global Marketing and Sales Manager Anoop K. Sharma “The constant tension monitoring and automatic control of the tension of the thread help to overcome unnecessary problems.

“We continue to make advances in both the hardware and software of our tension monitoring systems, such as the EyE™ for the warping process. With the EyE™, the yarn tension values from all yarns are continuously updated and displayed on screen. In addition, tension values outside the warning level are indicated both on the sensor’s LEDs and on the screen for complete quality control. No fabric can be woven without the appropriate and correct tension.”

Source:

AWOL Media

Kornit Digital Introduces High-Volume Digital Production Solution for Vibrant Decorative Designs on Polyester and Polyester-Blended Apparel (c) Kornit
Kornit Atlas MAX Poly
06.04.2022

Kornit Digital Printing for Unique Fashion

  • Kornit Digital Introduces High-Volume Digital Production Solution for Vibrant Decorative Designs on Polyester and Polyester-Blended Apparel
  • Kornit Atlas MAX Poly to Transform Professional and Recreational Sportswear, Teamwear, and Sports Brands; Injecting Life into Apparel with Power of Design Across Full Color Gamut

Kornit Digital Ltd. (NASDAQ: KRNT) (“Kornit”), a worldwide market leader in sustainable, on-demand digital fashionx and textile production, introduced today its distinctive Kornit Atlas MAX Poly system – an industry-first direct-to-garment (DTG) solution delivering superior-quality digital decoration for vibrant, colorful design on polyester and poly-blended apparel.

  • Kornit Digital Introduces High-Volume Digital Production Solution for Vibrant Decorative Designs on Polyester and Polyester-Blended Apparel
  • Kornit Atlas MAX Poly to Transform Professional and Recreational Sportswear, Teamwear, and Sports Brands; Injecting Life into Apparel with Power of Design Across Full Color Gamut

Kornit Digital Ltd. (NASDAQ: KRNT) (“Kornit”), a worldwide market leader in sustainable, on-demand digital fashionx and textile production, introduced today its distinctive Kornit Atlas MAX Poly system – an industry-first direct-to-garment (DTG) solution delivering superior-quality digital decoration for vibrant, colorful design on polyester and poly-blended apparel.

Kornit’s Atlas MAX Poly capitalizes on the demand for fashionable, unique sportswear and apparel. As the industry emerges from a post-pandemic environment in which athletic and leisurewear became mainstream, there is increasing demand for apparel combining polyester and poly-blends with vivid designs across a range of colors. Atlas MAX Poly can transform the multi-billion-dollar professional and recreational sports apparel and teamwear markets, limited today by limitations in mass customization of polyester.

“Kornit Atlas MAX Poly is a game-changer,” said Omer Kulka, Chief Marketing Officer at Kornit Digital. “As fashion and sports apparel merge, there’s new opportunity for innovative fashion on polyester, currently the fastest-growing textile vertical. For the first time, recreational sportswear, promotional, and sports brands can embrace vibrant and colorful design with Kornit’s proven MAX technology – setting superior quality standards for on-demand production previously not possible.”

Unveiled during Kornit Fashion Week Tel Aviv 2022, Atlas MAX Poly incorporates Kornit’s field-proven MAX technology for high-quality premium decoration, process automation, and smart autonomous quality control. With Kornit’s XDi decorative applications, Atlas MAX Poly enables endless designs and creativity on polyester, and empowers new styles for multiple effects and unlimited combinations such as emulating threadless embroidery, high-density vinyl, screen transfer emulations, and 3D effects.

The solution is compatible with mesh and plain fabrics, including brushed polyester, while maintaining durability and breathability. It brings the highest throughput for on-demand polyester decoration, reducing total cost of ownership to drive profitability. Customers gain competitive advantage via Pantone color-matching and a wide color gamut including neon colors for bright and vibrant impressions, using single-step mechanisms minimizing production footprints while maximizing versatility.

Beyond superior quality, graphics, color, and application variety, Kornit Atlas MAX Poly offers efficient, reliable, profitable end-to-end polyester production via:

  • Kornit’s ActiveLoad automated garment-loading and pallet adjustment for repeatable, high-quality output with minimal errors reducing time and waste, eliminating operator ramp-up and boosting throughput up to 20%.
  • Seamless integration with KornitX Global Fulfillment Network, enabling a pixel-to-parcel-to-doorstep experience. This unleashes untapped demand for polyester short-run production, personalization, and disruptive direct-to-fan and direct-to-recreational business models.
  • Integration with KornitX’s workflow ecosystem and Kornit Konnect™ dashboard, optimizing process visibility and control, adding data-driven insights for production floor efficiencies.
(c) VDMA
Chairperson and Vice Chairpersons of the VDMA Textile Machinery: Verena Thies, Dr. Janpeter Horn, Regina Brückner.
31.03.2022

VDMA: Dr. Janpeter Horn New Chairperson of Textile Machinery Association

Dr. Janpeter Horn, Managing Director of August Herzog Maschinenfabrik, is the new Chairperson of the VDMA Textile Machinery. Dr. Horn was elected at the members’ meeting of the Association in Leonberg. The new Executive Board is completed with Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik and Ms. Verena Thies, Managing Shareholder of Thies Textilmaschinen, who were elected as Vice Chairpersons.

After his election, Dr. Horn stated: “I am pleased to have Ms. Brückner and Ms. Thies by my side. Both have been serving on the Executive Board of the VDMA Textile Machinery as well as the European Committee of Textile Machinery Manufacturers CEMATEX for many years. With this team, we are well prepared to effectively represent the interests of the industry at national and international level.”

Based in Oldenburg, Northern Germany, Herzog is a company with a long tradition and at the same time the most innovative developer and manufacturer of braiding and winding machinery. Worldwide references in braiding and winding technique confirm the company’s technical and quality leadership.

Dr. Janpeter Horn, Managing Director of August Herzog Maschinenfabrik, is the new Chairperson of the VDMA Textile Machinery. Dr. Horn was elected at the members’ meeting of the Association in Leonberg. The new Executive Board is completed with Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik and Ms. Verena Thies, Managing Shareholder of Thies Textilmaschinen, who were elected as Vice Chairpersons.

After his election, Dr. Horn stated: “I am pleased to have Ms. Brückner and Ms. Thies by my side. Both have been serving on the Executive Board of the VDMA Textile Machinery as well as the European Committee of Textile Machinery Manufacturers CEMATEX for many years. With this team, we are well prepared to effectively represent the interests of the industry at national and international level.”

Based in Oldenburg, Northern Germany, Herzog is a company with a long tradition and at the same time the most innovative developer and manufacturer of braiding and winding machinery. Worldwide references in braiding and winding technique confirm the company’s technical and quality leadership.

The new Executive Board of the VDMA Textile Machinery for the legislative period until 2026 is composed of:

  • Dr. Janpeter Horn (Chairperson), August Herzog Maschinenfabrik
  • Regina Brückner (Vice Chairperson), BRÜCKNER Trockentechnik
  • Verena Thies (Vice Chairperson), THIES
  • Peter D. Dornier, Lindauer DORNIER
  • Stefan Flöth, A. Monforts Textilmaschinen
  • Arno Gärtner, KARL MAYER STOLL Textilmaschinenfabrik
  • Markus Kleindorp, MEMMINGER-IRO
  • Andreas Lukas, ANDRITZ Küsters
  • Benjamin Mayer, Mayer & Cie.
  • Dr. Jörg Morgner, Temafa Maschinenfabrik
  • Benjamin Reiners, Reiners + Fürst
  • Dr. Uwe Rondé, Saurer Group
  • Eric Schöller, Groz-Beckert
  • Georg Stausberg, Oerlikon Textile
  • Heinrich Trützschler, Trützschler Group
Source:

VDMA e. V.
Textilmaschinen

24.03.2022

Polyester recycling: Thai Polyester ordered four VacuFil recycling systems from BB Engineering

BB Engineering GmbH (Germany), a subsidiary of Oerlikon Textile, is pleased to announce that Thai Polyester Co., Ltd (Thailand) has placed a major order for four VacuFil systems for recycling bottle flakes with connected direct spinning. The polyester manufacturer, established in 2001 and with an overall annual capacity of 316,800 tons, is one of Thailand’s leading producers and exclusively uses German technology. To this end, the company already operates Oerlikon Barmag and Oerlikon Neumag systems. The BB Engineer-ing VacuFil systems will be deployed to convert existing spinning plant equipment from processing polyester to processing PET bottle flakes without loss of performance.

BB Engineering GmbH (Germany), a subsidiary of Oerlikon Textile, is pleased to announce that Thai Polyester Co., Ltd (Thailand) has placed a major order for four VacuFil systems for recycling bottle flakes with connected direct spinning. The polyester manufacturer, established in 2001 and with an overall annual capacity of 316,800 tons, is one of Thailand’s leading producers and exclusively uses German technology. To this end, the company already operates Oerlikon Barmag and Oerlikon Neumag systems. The BB Engineer-ing VacuFil systems will be deployed to convert existing spinning plant equipment from processing polyester to processing PET bottle flakes without loss of performance.

BB Engineering supplies the complete recycling process – from the drying stage and extrusion, all the way through to the spinning plant-appropriate fine filtration stage. Thanks to decades of experi-ence in spinning plant technology, the German machine construc-tor also provides comprehensive spinning plant know-how and is aware of how the recycling process must be designed to ensure that the product manufactured using the spinning plant ultimately has the right quality. The four new VacuFil systems will be integrated into the existing building infrastructure and process landscape at Thai Polyester, with a total output of approx. 4,000 kg/h. The Vacu-Fil systems will be complemented by BB Engineering 3DD mixers for directly feeding dyes into the recycled melt flow. Commissioning has been scheduled for 2023.

Thai Polyester will be using the new VacuFil systems to manufac-ture its ‘EcoTPC’ recycling-brand yarns. 100% of these polyester yarns are produced from bottle, fiber and yarn waste and are all GRS certified.

Source:

BB Engineering

Photo: Ralph Koch for Mayer & Cie.
23.03.2022

Mayer & Cie.: Successful 2021 - Digitisation, Sustainability and Modernisation topics for 2022

Looking back, 2021 was a positive year for the Albstadt-based circular knitting machine and braiding machine manufacturer Mayer & Cie. After two tough years, sales exceeded Euro 100 million again last year, and the outlook for this year is promising, with production working at long-term full capacity in the circular knitting machine sector.

Looking back, 2021 was a positive year for the Albstadt-based circular knitting machine and braiding machine manufacturer Mayer & Cie. After two tough years, sales exceeded Euro 100 million again last year, and the outlook for this year is promising, with production working at long-term full capacity in the circular knitting machine sector.

In order to maintain its market edge Mayer & Cie. continues to rely on digitisation of both its processes and its products. Substantial investment at its headquarters location, especially in machinery, is on the Mayer & Cie. agenda for 2022. In the years ahead a range of production machinery – lathes, gear cutting and grinding machines – is to be replaced at a scheduled cost running into low double-digit millions. Last year saw an investment in a robot-controlled laser hardening system for heat-treating machine components. The company passes an energy upgrade milestone these days with launching its new CHP cogeneration units.  
 
“Compared with 2020, our Group sales were up by about 40 per cent in 2021,” said Mayer & Cie. Managing Director Benjamin Mayer. After two difficult years in 2019 and 2020 the circular knitting machine manufacturer was able last year to restore sales to a stable level of about 103 million Euro. And it could have achieved an even better result. “Supply chain problems hampered production perceptibly,” the company’s managing director said. “In view of the order situation up to five per cent more might have been possible.” The Albstadt textile machinery manufacturer’s order position has stayed at a sound, high level since the fourth quarter of 2020, and orders in hand will already keep the circular knitting machine division busy until the end of the year, with orders coming in from all over the world, but especially, and with no change, from the company’s core markets Turkey, China and India.

The Management views with concern, however, the conflict in the Ukraine, which at first glance may not affect the sales market directly but might lead to general purchasing restraint in the capital goods sector that like the trade war between the United States and China, which began in 2018, would also affect Mayer & Cie. In addition, effects of the conflict such as high energy prices and interruptions in material supplies and logistics pose a genuine challenge in the further course of the year.

In the braiding machine division, the order position recovered in 2021. Sales of new machines and, especially, spare parts exceeded the 2020 figures significantly. Mayer & Cie. has once more won an award for its in-house and external digitisation measures as one of the most innovative German SMEs. The textile machinery manufacturer won a 2022 Top 100 award for its innovative processes in particular.

Source:

Mayer & Cie.

Snuggle Implements Kornit Atlas MAX Systems to Support Sustained Growth in Sustainable, Efficient Production on Demand (c) Kornit Digital
Kornit XDi at Snuggle
14.03.2022

Snuggle Implements Kornit Atlas MAX Systems to Support Sustained Growth in Sustainable, Efficient Production on Demand

  • “The Atlas MAX technology provides a marked improvement in quality; it gives you that edge and something different."

Kornit Digital Ltd. (NASDAQ: KRNT), a worldwide market leader in sustainable, on-demand, digital textile production technologies, announced today that Peterborough, United Kingdom-based print provider Snuggle has installed two Kornit Atlas MAX systems for superior versatility in their on-demand fulfilment production operations. A Kornit customer since 2017, the addition of Kornit’s most advanced direct-to-garment production systems reflects Snuggle’s sustained profitability and growth since that time.

  • “The Atlas MAX technology provides a marked improvement in quality; it gives you that edge and something different."

Kornit Digital Ltd. (NASDAQ: KRNT), a worldwide market leader in sustainable, on-demand, digital textile production technologies, announced today that Peterborough, United Kingdom-based print provider Snuggle has installed two Kornit Atlas MAX systems for superior versatility in their on-demand fulfilment production operations. A Kornit customer since 2017, the addition of Kornit’s most advanced direct-to-garment production systems reflects Snuggle’s sustained profitability and growth since that time.

Kornit Atlas MAX is the first digital direct-to-garment production system to feature XDi technology, which empowers users to simulate embroidery, dye sublimation, vinyl heat transfer, and 3D graphic effects with one single-step platform, using Kornit’s eco-friendly NeoPigment™ inks. Delivering superior graphic detail, consistent retail quality, and low and consistent cost per print to ensure profitability in any quantity, the system is engineered for adaptability to long-term automation needs, which helps businesses like Snuggle address the ongoing labour shortage.

With seven Kornit Digital systems in total, Snuggle is now able to produce up to 12,000 units daily, and has expanded its production space more than threefold since first investing in the technology. While the business does include an embroidery unit, Snuggle rejected screen printing due to its slow setup process, inefficient sampling for bulk orders, and the inability to generate profit from smaller custom orders. Furthermore, digitally-enabled production on demand was critical to their adapting when the pandemic economy caused many customers to cancel bulk orders suddenly.

More information:
Kornit Digital Atlas MAX
Source:

Kornit Digital

13.03.2022

Baldwin to showcase key innovations at ICE Europe in Munich

Baldwin Technology Company Inc.—a one-stop source for high-performance coating, curing, treating, cleaning and inspection solutions—will feature pioneering new technology for optimizing converting, printing and film-extrusion processes at ICE Europe, which will be held at the Munich Trade Fair Centre in Germany from March 15 to 17.

Baldwin’s innovations can help customers meet the burgeoning demand for film and packaging amid the many economic and logistical headwinds challenging the industry. In addition, Michael Stürmer, Baldwin’s Director of Strategic Accounts, will present “Back to the Future: The 100-year-old processautomation solutions the corrugated industry has overlooked, until now!” at 11:30 a.m. March 17 during the International Exhibition for the Corrugated and Folding Carton Industry, held in the same location as ICE.

Baldwin Technology Company Inc.—a one-stop source for high-performance coating, curing, treating, cleaning and inspection solutions—will feature pioneering new technology for optimizing converting, printing and film-extrusion processes at ICE Europe, which will be held at the Munich Trade Fair Centre in Germany from March 15 to 17.

Baldwin’s innovations can help customers meet the burgeoning demand for film and packaging amid the many economic and logistical headwinds challenging the industry. In addition, Michael Stürmer, Baldwin’s Director of Strategic Accounts, will present “Back to the Future: The 100-year-old processautomation solutions the corrugated industry has overlooked, until now!” at 11:30 a.m. March 17 during the International Exhibition for the Corrugated and Folding Carton Industry, held in the same location as ICE.

Baldwin provides converters with expertise and a broad range of market-leading innovations that offer superior print results, and enhance the economic and environmental efficiency of print production processes. Solutions on display at ICE will include automated cylinder cleaning systems, corona surface pretreatment systems, LED-UV curing and IR-drying systems, hot-air dryers, rotary spray systems, and technologies for color management and defect detection, all of which increase productivity, reduce waste, improve working conditions and provide full control of producing flawless products.

Source:

Barry-Wehmiller for Baldwin