From the Sector

Reset
1948 results
14.09.2023

Rudolf commissions Baldwin’s TexCoat™ G4 lab-scale precision spray unit

Rudolf GmbH, a provider of chemicals to the textile industry, can now offer side-by-side performance tests of the age-old “dip and squeeze” pad versus precision spray finishing with the delivery of Baldwin Technology Inc.’s TexCoat ™ G4 lab-scale unit.

Rudolf GmbH, a provider of chemicals to the textile industry, can now offer side-by-side performance tests of the age-old “dip and squeeze” pad versus precision spray finishing with the delivery of Baldwin Technology Inc.’s TexCoat ™ G4 lab-scale unit.

The new TexCoat lab-scale unit at Rudolf’s Geretsried, Germany-based Customer Solution Center, tests the sprayability of chemicals on fabrics as an additional tool to help the market transition to precision spray with confidence in the performance and sustainability of the end result.
 
With Baldwin’s innovative system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates.
 
Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry. On wet-on-dry processes, the finish is applied with 50% of the amount of water required for pad finishing. Dryer fabric entering the stenter means less water to evaporate resulting in less energy and higher production speeds.
 
More specifically, with Baldwin’s TexCoat G4, textile finishers can track and control the finishing process. Changeovers are quickly performed thanks to recipe management, including automated chemistry and coverage selection. Furthermore, the system takes speed information from the drying process to insure exact coverage regardless of any change in speed. TexCoat G4 measures every drop of chemical usage ensuring that the amount of chemical add-on is precise.
 
In addition, the TexCoat G4 system can process a wide range of low-viscosity water-based chemicals, such as durable water-repellants including PFAS-free, softeners, anti-microbials, easy care resins, flame retardants and more. Baldwin’s technology utilizes the same chemicals used in the traditional pad bath, with no special auxiliaries required.

Source:

Baldwin Technology Company Inc.

adidas re-imagines football jerseys as streetwear (c) adidas AG
adidas Manchester United LFSTLR Collection
14.09.2023

adidas re-imagines football jerseys as streetwear

adidas launches its new LFSTLR jersey collection, featuring the season 23/24 third jerseys of some its leading clubs, re-imagined as fashion-focused, lifestyle streetwear.

LFSTLR blurs the lines between football performance and streetwear culture, re-defining what it means to represent your club away from the terraces. The collection includes adaptations of the third jerseys of Arsenal, FC Bayern Munich, Juventus, Manchester United and Real Madrid, retaining the overall design blueprint of the authentic on-pitch and fan versions but with a focus on wearability and comfort over pure performance for the field of play.

Each jersey is made with an elevated base material, including heavier superior fabrics for additional comfort as well as featuring a more premium trim execution and detailing to truly ramp up the style factor. The application of a tonal adidas badge gives each jersey a clean, crisp look that gives the club crests additional prominence. Between 70-100% of the materials used in each jersey are from recycled or renewable sources.

adidas launches its new LFSTLR jersey collection, featuring the season 23/24 third jerseys of some its leading clubs, re-imagined as fashion-focused, lifestyle streetwear.

LFSTLR blurs the lines between football performance and streetwear culture, re-defining what it means to represent your club away from the terraces. The collection includes adaptations of the third jerseys of Arsenal, FC Bayern Munich, Juventus, Manchester United and Real Madrid, retaining the overall design blueprint of the authentic on-pitch and fan versions but with a focus on wearability and comfort over pure performance for the field of play.

Each jersey is made with an elevated base material, including heavier superior fabrics for additional comfort as well as featuring a more premium trim execution and detailing to truly ramp up the style factor. The application of a tonal adidas badge gives each jersey a clean, crisp look that gives the club crests additional prominence. Between 70-100% of the materials used in each jersey are from recycled or renewable sources.

adidas worked with each club to appoint a Creative Lead, tapping into the worlds of fashion and music, and ensuring the unique flair of each team came through with bespoke individuality:

  • Arsenal linked up with Grammy-award winning rapper, Pusha T
  • FC Bayern collaborated with Achraf, one of the hottest names in the German fashion and music industry
  • Juventus called upon Italian style with fashion photographer Giampaolo Sgura
  • Manchester United teamed up with Nigerian Afropop singer-songwriter, Adekunle Gold & Manchester’s The KTNA
  • Real Madrid worked with renowned Mexican rapper, Alemán 
More information:
adidas Sportswear Jersey
Source:

adidas AG

Santoni Shanghai acquires German circular knitting machinery maker Terrot (c) Santoni / Terrot
13.09.2023

Santoni Shanghai acquires German circular knitting machinery maker Terrot

Santoni Shanghai Knitting Machinery Co., Ltd. announced the strategic acquisition of Terrot GmbH, a manufacturer of circular knitting machines based in Chemnitz, Germany. The move comes as the latest development in Santoni Shanghai’s long-term vision to build an ecosystem that aims to reshape and consolidate the circular knitting industry. The transaction will be finalized pending approval from Chinese regulatory authorities.

The global circular knitting machine market is expected to see significant growth in the coming years, with a July 2023 report from Consegic Business Intelligence forecasting a 5.7% CAGR from 2023 to 2030, propelled by an increasing consumer preference for breathable and comfortable knitted fabrics as well as increasingly diversification of demand for knitted apparel. To seize this market opportunity, Santoni Shanghai has developed an ambitious strategic plan centered around innovation, sustainability and digitalization. The new partnership with Terrot aims to further this strategy by enhancing Santoni’s integrated and scaled-up ecosystem, while also driving the sustainable development of the global knitting machinery industry.

Santoni Shanghai Knitting Machinery Co., Ltd. announced the strategic acquisition of Terrot GmbH, a manufacturer of circular knitting machines based in Chemnitz, Germany. The move comes as the latest development in Santoni Shanghai’s long-term vision to build an ecosystem that aims to reshape and consolidate the circular knitting industry. The transaction will be finalized pending approval from Chinese regulatory authorities.

The global circular knitting machine market is expected to see significant growth in the coming years, with a July 2023 report from Consegic Business Intelligence forecasting a 5.7% CAGR from 2023 to 2030, propelled by an increasing consumer preference for breathable and comfortable knitted fabrics as well as increasingly diversification of demand for knitted apparel. To seize this market opportunity, Santoni Shanghai has developed an ambitious strategic plan centered around innovation, sustainability and digitalization. The new partnership with Terrot aims to further this strategy by enhancing Santoni’s integrated and scaled-up ecosystem, while also driving the sustainable development of the global knitting machinery industry.

“With the strategic investment of Santoni, we aim to strengthen our position as the preferred solution provider to many of the world’s leading textile manufacturers and top brands as well as continue working with industry talents as we provide valuable and essential know-how to drive premium ‘Made in Germany’ textile machinery.” said Robert Czajkowski, Managing Director of Terrot GmbH. "We have found a strong, globally active partner with clear dedication to quality, performance and excellent expertise in all circular knitting segments, who understands the unique value proposition and potentials of our portfolio and with whom we can realize our growth objectives” he added.

Source:

Terrot GmbH

OCSiAl: New Graphene nanotube facility in Europe (c) OCSiAl Group
13.09.2023

OCSiAl: New Graphene nanotube facility in Europe

OCSiAl, a leader in graphene nanotube technologies, has been granted a construction permit for a nanotube production facility near Belgrade, Serbia. The new nanotube synthesis plant will be launched in 2024 and will have an initial annual capacity of 60 tonnes of graphene nanotubes. Over the next two years, the capacity of this plant will be increased to 120 tonnes per year. “The project will facilitate logistics and lower supply chain costs. European-produced nanotubes and nanotube derivatives will be primarily supplied to our customers in central and western Europe, North America, and Asia,” said OCSiAl Group Senior Vice President Gregory Gurevich.
 

OCSiAl, a leader in graphene nanotube technologies, has been granted a construction permit for a nanotube production facility near Belgrade, Serbia. The new nanotube synthesis plant will be launched in 2024 and will have an initial annual capacity of 60 tonnes of graphene nanotubes. Over the next two years, the capacity of this plant will be increased to 120 tonnes per year. “The project will facilitate logistics and lower supply chain costs. European-produced nanotubes and nanotube derivatives will be primarily supplied to our customers in central and western Europe, North America, and Asia,” said OCSiAl Group Senior Vice President Gregory Gurevich.
 
In addition to synthesizing nanotubes, the facility will manufacture nanotube suspensions for lithium-ion battery manufacturers in Europe, the US, and Asia – enough to enhance the performance of more than 1 mln electric cars with an average battery capacity of 75 kWh per car. OCSiAl nanotubes create long and robust electrical networks between active material particles, improving key battery characteristics, including cycle life, lower DCR, C-rate performance, and cohesion between active battery material particles, making the battery electrodes more durable. Graphene nanotubes unlock new battery technologies, including high-silicon content anodes, thick LFP cathodes, fast-charging graphite anodes, and more. They can be applied in both conventional and emerging battery tech, such as a dry battery electrode coating process, and solid-state batteries.
 
As well as synthesizing nanotubes and producing suspensions, OCSiAl project includes manufacturing of nanotube concentrates for high-performance polymers. The project has passed environmental impact assessment and it is 100% powered by green energy. It enjoys support from Serbian municipal and national governments. The plant is planned to be certified in accordance with ISO 9001, ISO 14001, and ISO 45001, and to be compliant with the IATF 16949 automotive industry standard. The project will create more than 200 job opportunities for engineers, scientists, managers, operators, and administrative staff.
 
Currently, OCSiAl has an extensive manufacturing system of nanotube-based products in the regions of highest market demand, such as China, Japan, Sri Lanka, Brazil, Malaysia, and other countries. The Serbia nanotube hub will operate in conjunction with the company’s operational R&D center and planned graphene nanotube synthesis facility in Luxembourg.

Source:

OCSiAl Group

13.09.2023

Textil Santanderina launches black denim collection with Archroma’s sulfur dyestuff

Textil Santanderina, a manufacturer of quality fabrics with controlled traceability, launched its Advanced Black denim collection in collaboration with Archroma.

The Advanced Black collection by Textil Santanderina uses Archroma’s new DIRESUL® EVOLUTION BLACK LIQ dyestuff to produce on-trend authentic black denim apparel with sustainability and resource savings. In addition to allowing fashion and apparel brands to choose eco-friendlier alternatives that demonstrate their commitment to protecting people and planet, Textil Santanderina’s new Advanced Black denim range also offers unique shade and wash-down effects.

Textil Santanderina, a manufacturer of quality fabrics with controlled traceability, launched its Advanced Black denim collection in collaboration with Archroma.

The Advanced Black collection by Textil Santanderina uses Archroma’s new DIRESUL® EVOLUTION BLACK LIQ dyestuff to produce on-trend authentic black denim apparel with sustainability and resource savings. In addition to allowing fashion and apparel brands to choose eco-friendlier alternatives that demonstrate their commitment to protecting people and planet, Textil Santanderina’s new Advanced Black denim range also offers unique shade and wash-down effects.

Based on synthesis technology developed by Archroma, DIRESUL EVOLUTION BLACK LIQ delivers an overall impact reduction to 57%*, measuring its effect on human health, ecosystems and resources compared to standard Sulfur Black 1 liquid. Unlike traditional synthesis processes, it does not produce any ammonia, sodium salts waste or liquid effluents, and water consumption in the synthesis process is reduced by 73% for massive savings. The new DIRESUL dyestuff, when adopted with the full Archroma coloration system, delivers a new black color with on-tone wash-down effect and cleaner effluent at the mill.

Textil Santanderina and Archroma previously collaborated to produce Textil Santanderina’s aniline-free** indigo denim collection with the use of DENISOL® PURE INDIGO.

*As determined by Ecoterrae, a leading Spain-based sustainability consulting firm, through a Life Cycle Analysis (UNE-EN ISO 14044:2006) at the synthesis stage, using the ReCiPe 2016 Impact calculation methodology.
**Below limits of detection according to industry standard test methods.

Brembo SGL Carbon Ceramic Brakes expands production capacity (c) SGL CARBON SE
13.09.2023

Brembo SGL Carbon Ceramic Brakes expands production capacity

SGL Carbon and Brembo agreed to expand production capacities for the joint venture Brembo SGL Carbon Ceramic Brakes (BSCCB). Both companies have been working together with BSCCB on the conditions and implementation plans for this in the preceding months. BSCCB will invest around €150 million until 2027 to expand by more than 70% production capacities at the sites in Meitingen (Germany) and Stezzano (Italy).

The capacity enlargement includes the construction of two new production facilities at the SGL Carbon Meitingen site with a total area of around 8,500 m² and the installation of new production machinery. The groundbreaking in Meitingen will take place this fall.

At the Stezzano site, production areas will be extended by around 4.000 m² to existing buildings and investments will be made in new production machinery.

SGL Carbon and Brembo agreed to expand production capacities for the joint venture Brembo SGL Carbon Ceramic Brakes (BSCCB). Both companies have been working together with BSCCB on the conditions and implementation plans for this in the preceding months. BSCCB will invest around €150 million until 2027 to expand by more than 70% production capacities at the sites in Meitingen (Germany) and Stezzano (Italy).

The capacity enlargement includes the construction of two new production facilities at the SGL Carbon Meitingen site with a total area of around 8,500 m² and the installation of new production machinery. The groundbreaking in Meitingen will take place this fall.

At the Stezzano site, production areas will be extended by around 4.000 m² to existing buildings and investments will be made in new production machinery.

The extensive expansion of production capacities will enable Brembo SGL Carbon Ceramic Brakes (BSCCB) to meet the high market demand and to cover the increasing customer requests in the future. The need for carbon ceramic brake discs from BSCCB increased worldwide. This is mainly due to the high product quality and performance of carbon ceramic brake discs, which meet the specific requirements of automotive manufacturers, especially in the premium and luxury segments, where high braking performance is needed.

Source:

SGL CARBON SE

11.09.2023

Project and technology study: Trends and Design Factors for Hydrogen Pressure Vessels

Die AZL Aachen GmbH, bekannter Innovationspartner für Industriekooperationen auf dem Gebiet der Leichtbautechnologieforschung, startet eines neuen Projekts mit dem Titel "Trends und Designfaktoren für Wasserstoffdruckbehälter". Das Projekt wird Fragestellungen der Industrie in Bezug auf die Wasserstoffspeicherung adressieren.


AZL Aachen GmbH, a recognized innovator in lightweight technologies research and industry collaboration, announces the initiation of a new project titled "Trends and Design Factors for Hydrogen Pressure Vessels". The project aims to address industry needs surrounding hydrogen storage.

Hydrogen has gained significant attention as a key technological solution for decarbonization, with high pressure storage and transportation emerging as vital components. Its applications extend from stationary storage solutions to mobile pressure vessels employed in sectors such as transportation and energy systems.

Die AZL Aachen GmbH, bekannter Innovationspartner für Industriekooperationen auf dem Gebiet der Leichtbautechnologieforschung, startet eines neuen Projekts mit dem Titel "Trends und Designfaktoren für Wasserstoffdruckbehälter". Das Projekt wird Fragestellungen der Industrie in Bezug auf die Wasserstoffspeicherung adressieren.


AZL Aachen GmbH, a recognized innovator in lightweight technologies research and industry collaboration, announces the initiation of a new project titled "Trends and Design Factors for Hydrogen Pressure Vessels". The project aims to address industry needs surrounding hydrogen storage.

Hydrogen has gained significant attention as a key technological solution for decarbonization, with high pressure storage and transportation emerging as vital components. Its applications extend from stationary storage solutions to mobile pressure vessels employed in sectors such as transportation and energy systems.

The AZL team, renowned for its high reputation in providing market and technology insights as well as developing component and production concepts in the format of Joint Partner Projects seeks for companies along the whole composite value chain interested in further developing their application know how in this economically highly relevant field.

The project will provide an in depth exploration of market insights, regulatory standards, and intellectual property landscapes. Beyond this, there is a dedicated focus on staying updated with state of the art and advancements in design, materials, and man ufacturing techniques.

An integral component of the project involves the creation of reference designs by AZL´s engineering team. The reference designs will encompass a variety of pressure vessel configurations and will consider a diverse range of materials and production concep ts.

With the scheduled project start in October 2023, and a project timeline of approximately nine months, AZL encourages companies active across the composite value chain to participate. Companies interested in participating or seeking further information should reach out directly to the AZL expert team.

Source:

Aachener Zentrum für integrativen Leichtbau

Manel Echevarria Photo Ananas Anam
Manel Echevarria
06.09.2023

Ananas Anam: Manel Echevarria new CEO

Ananas Anam, the provider of innovative low-impact textile solutions made from pineapple leaf waste, announced the appointment of Manel Echevarria as the new CEO. The Spanish executive who had previously worked as CEO for Grupo Excens Sports and Lacoste Iberia, as well as in senior executive roles for Swarovski and MontBlanc, will lead the global business from its European research and production site near Barcelona in Spain.

At the beginning of the year, the company reported the successful closing of a funding round led by HALTRA Group, a family-backed sustainable investment firm in Luxembourg and a group of strategic investors, including the French Compagnie Fruitière, one of the leading producers in Europe and major fruit producer in the Africa-Caribbean-Pacific region, as well the global automotive technology supplier Forvia, and Asahi Kasei Corp, a leading Japanese multinational group working in innovative materials and technologies.

Ananas Anam, the provider of innovative low-impact textile solutions made from pineapple leaf waste, announced the appointment of Manel Echevarria as the new CEO. The Spanish executive who had previously worked as CEO for Grupo Excens Sports and Lacoste Iberia, as well as in senior executive roles for Swarovski and MontBlanc, will lead the global business from its European research and production site near Barcelona in Spain.

At the beginning of the year, the company reported the successful closing of a funding round led by HALTRA Group, a family-backed sustainable investment firm in Luxembourg and a group of strategic investors, including the French Compagnie Fruitière, one of the leading producers in Europe and major fruit producer in the Africa-Caribbean-Pacific region, as well the global automotive technology supplier Forvia, and Asahi Kasei Corp, a leading Japanese multinational group working in innovative materials and technologies.

“The appointment of Manel Echevarria as a seasoned CEO with an impressive track-record in the fashion and luxury industry marks another important milestone in setting Ananas Anam up for the next phase of growth” says Dr. Christian Kurtzke, Chairman of Ananas Anam. “Following our investment in the development of an impressive portfolio of next-generation innovative biodegradable, traceable and sustainable materials, and into the setup of its network of strategic partners on the supply and shareholder side, Manel will provide the leadership for driving growth and industrial scale of this pioneering sustainability brand amidst a continued challenging global market environment in fashion, interiors and automotive.”

With Ananas Anam’s core portfolio of innovative materials, the company has successfully collaborated with well-known brands including Nike, Hugo Boss, H&M, Paul Smith and Cat Footwear and sustainable-fashion pioneers like Ecoalf to drive innovation in footwear, as well as with fashion brands like Carolina Herrera in the area of bags and accessories, substituting animal leather in the product design with its vegan, cruelty-free, low-impact and sustainable pineapple leaf fibre based textiles. In July 2023, at the Premiere Vision exhibition in Paris, the company presented the next generation of Piñatex as well as its breakthrough innovation Piñayarn as a biodegradable, traceable and sustainable yarn, and introducing Anam PALF, as a commercially available premium textile grade pineapple leaf fibre, opening up a world of new applications and markets.

“Driving the sustainability transformation in fashion, as well as in interiors and automotive has become a key priority on the agenda of brands and OEMs around the world,” says Manel Echevarria, CEO Ananas Anam. “I am proud to have the opportunity to lead the company in this decisive time, and I am looking forward to collaborating with our exceptional Spanish founder, Dr Carmen Hijosa, and Josep Taylor in Spain, with Bruno de Penanster and his team in the UK, as well as with Chuck Lazaro and his team in the Philippines to turn this amazing sustainability ambition and purpose into a reality.”

Source:

Ananas Anam

ZwissTex integrates Kornit Technology in Production Photo: Kornit / ZwissTex
06.09.2023

ZwissTex integrates Kornit Technology in Production

Germany-based ZwissTex is a leading manufacturer of textiles with over 150 years of experience, creating innovative and sustainable textile solutions for the automotive and apparel industries. The company also operates in Mexico, to specifically serve the automotive sector across North American Free Trade Agreement (NAFTA) markets. Via OEMs, ZwissTex supplies German automakers including Volkswagen Auto Group, BMW, and Mercedes, as well as American manufacturers in select cases.

Unlike other Kornit customers, ZwissTex had no previous experience printing their own materials, and saw Kornit’s sustainable, single-step, Presto MAX S production system as an effective means of increasing their product capabilities.

Germany-based ZwissTex is a leading manufacturer of textiles with over 150 years of experience, creating innovative and sustainable textile solutions for the automotive and apparel industries. The company also operates in Mexico, to specifically serve the automotive sector across North American Free Trade Agreement (NAFTA) markets. Via OEMs, ZwissTex supplies German automakers including Volkswagen Auto Group, BMW, and Mercedes, as well as American manufacturers in select cases.

Unlike other Kornit customers, ZwissTex had no previous experience printing their own materials, and saw Kornit’s sustainable, single-step, Presto MAX S production system as an effective means of increasing their product capabilities.

“Our textiles were not classically printed in the past, and we did not produce any classical textiles in fashion, which is why we didn’t have any printing experience internally,” said Ralph Moldan, Technical Specialist at ZwissTex, as the system was being installed in their facility. “The only option was to find a system that would enable us to implement the areas in which we are active on the market easily and quickly, without requiring a lot of printing experience.”

One benefit of integrating Kornit technology into the ZwissTex production ecosystem: applying ink only where it is needed and seen, rather than to the full surface of each material. This translates to both reducing the company’s carbon footprint, and minimizing materials waste for a more cost-effective operation.

Prior to making the decision to invest in Kornit, ZwissTex conducted a series of tests and consultations, evaluating possible applications for different materials and engaging with their own key clients to ensure these finished products would meet their rigorous quality and durability standards. This included presenting Kornit-decorated samples at the Techtextil 2022 exhibition in Frankfurt.

Moldan found Kornit’s production capabilities opened new doors to customization of interior areas, a market that continues to grow. He anticipates this technology will create new opportunities with customers they could not reach previously, including new opportunities in sectors such as motor homes, airlines, and aircraft outfitters.

Source:

Kornit Digital

BAE: ‘Best of Bangladesh Europe’ in Amsterdam Photo: Bangladesh Apparel Exchange
06.09.2023

BAE: ‘Best of Bangladesh Europe’ in Amsterdam

On 5th September 2023, the Amsterdam: Best of Bangladesh Europe’ started in the venue of Wastergas in Amsterdam. The 2-day nation branding event was organized by Bangladesh Apparel Exchange (BAE), with support from the Embassy of Bangladesh, Ministry of Commerce, Export Promotion Bureau (EPB) of Bangladesh and in association with PDS.

Tipu Munshi, MP, Commerce Minister, Government of the People’s Republic of Bangladesh; Michiel Sweers, Vice Minister of Foreign Economic Relations, Kingdom of the Netherlands; Shahriar Alam, MP, State Minister for Foreign Affairs, Government of the People’s Republic of Bangladesh; Md Siddiqur Rahman,  Former president of BGMEA; M Riaz Hamidullah, Ambassador of Bangladesh to the Netherlands; Leslie Johnston, Chief Executive Officer, Laudes Foundation; Pallak Seth, Founder & Vice Chairman, PDS Limited; and Mostafiz Uddin, Founder & CEO, Bangladesh Apparel Exchange; attended the inaugural ceremony of the ‘Best of Bangladesh’.

On 5th September 2023, the Amsterdam: Best of Bangladesh Europe’ started in the venue of Wastergas in Amsterdam. The 2-day nation branding event was organized by Bangladesh Apparel Exchange (BAE), with support from the Embassy of Bangladesh, Ministry of Commerce, Export Promotion Bureau (EPB) of Bangladesh and in association with PDS.

Tipu Munshi, MP, Commerce Minister, Government of the People’s Republic of Bangladesh; Michiel Sweers, Vice Minister of Foreign Economic Relations, Kingdom of the Netherlands; Shahriar Alam, MP, State Minister for Foreign Affairs, Government of the People’s Republic of Bangladesh; Md Siddiqur Rahman,  Former president of BGMEA; M Riaz Hamidullah, Ambassador of Bangladesh to the Netherlands; Leslie Johnston, Chief Executive Officer, Laudes Foundation; Pallak Seth, Founder & Vice Chairman, PDS Limited; and Mostafiz Uddin, Founder & CEO, Bangladesh Apparel Exchange; attended the inaugural ceremony of the ‘Best of Bangladesh’.

Three MoU were signed in the inaugural for the development of the industries of Bangladesh.
The 1st MoU was signed between Bangladesh Apparel Exchange and Eindhoven International Project Office (EIPO). The 2nd MoU was signed between Bangladesh Apparel Exchange and Apparel Impact Institution. The 3rd MoU was signed between Bangladesh Apparel Exchange and Oxfam.
More than 35 companies from various fields, including apparel, textiles, agriculture, handicrafts, and other sectors, participated in the initiative.

The event held six interactive panel sessions on the topics "Bangladesh – Perspectives from an Emerging Economy", "Sustainable Sourcing Realities: Challenges, Achievements & Next Steps”, “Empowering the Future: Advancing Safety & Well-being for Garments Workforce in Bangladesh", "Bangladesh Agro-Food: A Next Opportunity for Collaboration", "Impact Investing - The Next Frontier", and “Sustainable Synergy: Circular Economy, Climate Action & Bangladesh’s Future".

A Bangladesh Innovation Runway was presented by Pacific Jeans at the event. The Bangladesh Innovation Runway showcased the ability of the country in producing high end, sustainable and innovative apparel products.

Source:

Bangladesh Apparel Exchange

Photo: MeineRaumluft
06.09.2023

OETI and MeineRaumluft join forces

OETI - Institute for Ecology, Technology and Innovation’ (or OETI for short), is now working with the independent platform ‘MeineRaumluft’.

OETI and MeineRaumluft will work closely together to make a sustainable contribution to optimising the indoor climate. Starting this autumn, they will implement a groundbreaking initiative in Austria. The primary objective of this initiative is to raise awareness of the significance of indoor air as a factor for health and productivity in work and office environments. This message will be conveyed by means of precise measurements, knowledge sharing as well as practical recommendations

OETI has a great deal of expertise in the field of indoor air measurements and certifications. The accredited institution is certified for emission testing according to ISO 16000 parts 2, 3, 6, 9 and 11 as well as EN 16516. OETI also sets standards for indoor air quality with its CLEANAIR certification.

OETI - Institute for Ecology, Technology and Innovation’ (or OETI for short), is now working with the independent platform ‘MeineRaumluft’.

OETI and MeineRaumluft will work closely together to make a sustainable contribution to optimising the indoor climate. Starting this autumn, they will implement a groundbreaking initiative in Austria. The primary objective of this initiative is to raise awareness of the significance of indoor air as a factor for health and productivity in work and office environments. This message will be conveyed by means of precise measurements, knowledge sharing as well as practical recommendations

OETI has a great deal of expertise in the field of indoor air measurements and certifications. The accredited institution is certified for emission testing according to ISO 16000 parts 2, 3, 6, 9 and 11 as well as EN 16516. OETI also sets standards for indoor air quality with its CLEANAIR certification.

More information:
OETI indoor climate
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

05.09.2023

Beaulieu International Group at International Conference on Geosynthetics

Beaulieu International Group will turn the spotlight on geotextile products with sustainability benefits to support progress in resilient civil engineering projects at the 12th ICG Rome from 18th -21st September 2023, presenting options to target fossil carbon reduction by choosing PP-based staple fibres or woven geotextiles that are among the lowest in carbon footprint for geosynthetics.

For manufacturers of nonwoven geotextiles, Beaulieu Fibres International (BFI) offers PP fibres with > 25% carbon footprint reduction compared to the European standard PP fibres, generating 1.48 kg CO2/kg PP fibres. A step further is to accelerate the replacement of fossil carbon in engineered fibre applications by choosing its ISCC Plus certified bio-attributed MONO-PP with a negative carbon footprint.

For construction projects, nonwoven geotextiles made with high-tenacity HT8 fibres are proven to secure a longer service lifetime and reduce the environmental impact, as they offer high mechanical performance at a reduced weight.

Beaulieu International Group will turn the spotlight on geotextile products with sustainability benefits to support progress in resilient civil engineering projects at the 12th ICG Rome from 18th -21st September 2023, presenting options to target fossil carbon reduction by choosing PP-based staple fibres or woven geotextiles that are among the lowest in carbon footprint for geosynthetics.

For manufacturers of nonwoven geotextiles, Beaulieu Fibres International (BFI) offers PP fibres with > 25% carbon footprint reduction compared to the European standard PP fibres, generating 1.48 kg CO2/kg PP fibres. A step further is to accelerate the replacement of fossil carbon in engineered fibre applications by choosing its ISCC Plus certified bio-attributed MONO-PP with a negative carbon footprint.

For construction projects, nonwoven geotextiles made with high-tenacity HT8 fibres are proven to secure a longer service lifetime and reduce the environmental impact, as they offer high mechanical performance at a reduced weight.

Beaulieu Technical Textiles' (BTT) woven geotextiles provide a wide range of functions, including separation, filtration, reinforcement and erosion control, and are among the most sustainable in the industry. Depending on weight, the carbon footprint of its woven geotextiles (m²) ranges between 0.37 and 1.40 kg CO2 eq./m². They also minimize the use of natural resources for more sustainable infrastructure development. Case studies such as at the Ostend-Bruges airport highlight significant CO2 reduction on the jobsite by replacing the transport of 960 trucks of gravel with 3 trucks of woven geotextiles, and by extending the runway’s life span.

The ICG launch of its new line Terralys MF woven filtration geotextiles with monofilament boosts the performance of a common solution in building layers that require high water flow rates. High-tenacity extruded polypropylene tapes and monofilaments are interwoven to form dimensionally stable and highly permeable geotextiles. These new filtration geotextiles provide greater resistance to dirt and biological clogging. They allow water to travel freely while reducing soil erosion when employed as a separation and stabilizing layer.

As of September 2023, all PP staple fibres and woven geotextiles will have Environmental Product Declarations (EPD) based on LCAs. Each EPD is an essential tool for communicating and reporting on the sustainability performance and helps carbon-conscious customers in their purchasing and decision making. Registered EPDs are globally recognized, publicly available and free to download through EPD Libraries.

Source:

Beaulieu International Group

04.09.2023

Spinnova reviews strategy: New licensing models

Spinnova has decided to evaluate its existing strategy to prioritise areas that in the short- to medium-term deliver the fastest time to positive cashflow generation and that create the most value for the company’s stakeholders.
 


The company expects to conclude the assessment of its strategy in the coming months, after which the results will be presented in more detail including key actions and any changes to medium- and long-term business targets. Financial guidance for full year 2023 is unchanged.

Spinnova has decided to evaluate its existing strategy to prioritise areas that in the short- to medium-term deliver the fastest time to positive cashflow generation and that create the most value for the company’s stakeholders.
 


The company expects to conclude the assessment of its strategy in the coming months, after which the results will be presented in more detail including key actions and any changes to medium- and long-term business targets. Financial guidance for full year 2023 is unchanged.

Spinnova’s unique sustainable technology is a key differentiator. To recognize the value of its technology offering, the company has decided to review opportunities to expand the licensing of its technology to new customers. In the future, Spinnova sees great potential in developing circular raw materials such as textile waste and agricultural waste, as well as recycled SPINNOVA® fibre. Initial tests show that refining these raw materials into micro fibrillated cellulose (MFC) may be more efficient than refining other raw materials Spinnova has worked with. The company has received significant interest from customers wanting to build plants that convert multiple circular raw materials into SPINNOVA® fibre.

Together with Suzano, Spinnova is gathering the learnings from the first Woodspin plant to support the decision making for the next Woodspin factory investment. At the same time Spinnova continues to further develop the technology concept to reduce capital expenditure per tonne of fibre produced compared to the first Woodspin plant. While Suzano develops its MFC process it is expected that the first Woodspin facility will mainly be used for R&D to test new MFC batches and that commercial production volumes will be limited in the short term. The market opportunity and ambition level with Suzano to scale Woodspin’s production capacity remains unchanged

Spinnova will continue to have the option to invest into all future Woodspin and Respin plants, as per the respective joint venture agreements. The company will evaluate whether it participates in these investments based on the value it creates for Spinnova’s shareholders compared to other opportunities to invest Spinnova’s capital. Regardless of whether Spinnova invests its own capital into future plants, Spinnova will continue to be the exclusive technology provider to Woodspin and Respin, and they will continue to be important technology customers of Spinnova.

More information:
Spinnova strategy paper licensing
Source:

Spinnova

SETEX (c) SETEX Schermuly textile computer GmbH
04.09.2023

Elvaston takes over majority stake in SETEX

SETEX Schermuly textile computer GmbH, a global leader in manufacturing process management software and textile machinery controls, is pleased to announce the transfer of a majority stake to Elvaston Capital Management GmbH.

Private equity partner Elvaston has established the overarching Textile Solutions Holding GmbH. This company will manage a portfolio of technology companies that ensure seamless integration along the textile process chain and introduce unique market functionalities.

The current company owners of SETEX, Christoph and Oliver Schermuly, will continue their roles as managing directors.

SETEX is convinced that this step will further expand SETEX's competitiveness and growth potential.

SETEX Schermuly textile computer GmbH, a global leader in manufacturing process management software and textile machinery controls, is pleased to announce the transfer of a majority stake to Elvaston Capital Management GmbH.

Private equity partner Elvaston has established the overarching Textile Solutions Holding GmbH. This company will manage a portfolio of technology companies that ensure seamless integration along the textile process chain and introduce unique market functionalities.

The current company owners of SETEX, Christoph and Oliver Schermuly, will continue their roles as managing directors.

SETEX is convinced that this step will further expand SETEX's competitiveness and growth potential.

Source:

SETEX Schermuly textile computer GmbH

01.09.2023

OEKO-TEX® Annual Report 2022/2023: 21% growth

The international OEKO-TEX® Association, offering collaborative solutions for partners in the textile and leather industry, has once again recorded positive business development. Overall, OEKO-TEX® issued more than 43,000 certificates and labels between July 1, 2022, and June 30, 2023 - an increase of 21% compared to the previous financial year. The MADE IN GREEN product label recorded the strongest growth of 52%. OEKO-TEX® continues to drive urgently needed change through cooperation and joint action - with their services and at the organizational level.

The international OEKO-TEX® Association, offering collaborative solutions for partners in the textile and leather industry, has once again recorded positive business development. Overall, OEKO-TEX® issued more than 43,000 certificates and labels between July 1, 2022, and June 30, 2023 - an increase of 21% compared to the previous financial year. The MADE IN GREEN product label recorded the strongest growth of 52%. OEKO-TEX® continues to drive urgently needed change through cooperation and joint action - with their services and at the organizational level.

For their two new certifications, OEKO-TEX® focused on cooperation with numerous parties along the global supply chain. Launched in November 2022, OEKO-TEX® RESPONSIBLE BUSINESS addresses the increasing global expectations and due diligence requirements. The tool and certification supports textile and leather companies in preventing negative effects from their own business operations, supply chains and broader business relationships. Companies working with OEKO-TEX® ORGANIC COTTON benefit from a global network of certified companies to facilitate sourcing of chemicals, materials and business partners - from cultivation to finished product.

At the organisational level, OEKO-TEX® is focusing on partnerships with multi-stakeholder initiatives to include as many different perspectives as possible and allow all parties to benefit. Working with ZDHC to promote sustainable chemical management and becoming an ISEAL community member are just two of many collaborations for OEKO-TEX®, which is striving to address the industry's most pressing challenges.

Meanwhile, the Association’s core business advances. For example, based on industry developments and scientific findings, OEKO-TEX® issued a general ban on the use of per- and polyfluorinated alkyl substances (PFAS/PFC) in textiles, leather and shoes certified by STANDARD 100, ORGANIC COTTON, LEATHER STANDARD and ECO PASSPORT. OEKO-TEX® also surpassed the milestone of 1,000 STeP certified production facilities. OEKO-TEX® is in a strong position to continue its work - enabling the industry and consumers to make more responsible decisions through partnership and education.

Source:

Oeko-Tex GmbH

31.08.2023

Lenzing's Indonesian site turns into a supplier of specialty viscose fibers

The Lenzing Group, a leading provider of specialty fibers for the textile and nonwoven industries, has made significant technical improvements to its Purwakarta site (PT. South Pacific Viscose). Lenzing has invested more than EUR 100 million since 2021 to convert existing production capacity to specialty viscose. With the imminent completion of the investment, Lenzing is in a better position to serve the strongly growing demand for specialty fibers.

Lenzing is striving for certification according to the standard of the internationally recognized EU Ecolabel1. The product portfolio would thus include LENZING™ ECOVERO™ branded fibers for textiles and VEOCEL™ branded fibers for nonwoven applications. In the course of these substantial investments, Lenzing has set the goal of significantly reducing emissions at the site. Moreover, the site started to obtain renewable grid electricity and promotes a changeover to biomass in line with Lenzing's goals of reducing carbon emissions per ton of product by 50 percent by 2030 and achieving carbon-neutral production by 2050.

The Lenzing Group, a leading provider of specialty fibers for the textile and nonwoven industries, has made significant technical improvements to its Purwakarta site (PT. South Pacific Viscose). Lenzing has invested more than EUR 100 million since 2021 to convert existing production capacity to specialty viscose. With the imminent completion of the investment, Lenzing is in a better position to serve the strongly growing demand for specialty fibers.

Lenzing is striving for certification according to the standard of the internationally recognized EU Ecolabel1. The product portfolio would thus include LENZING™ ECOVERO™ branded fibers for textiles and VEOCEL™ branded fibers for nonwoven applications. In the course of these substantial investments, Lenzing has set the goal of significantly reducing emissions at the site. Moreover, the site started to obtain renewable grid electricity and promotes a changeover to biomass in line with Lenzing's goals of reducing carbon emissions per ton of product by 50 percent by 2030 and achieving carbon-neutral production by 2050.

“Demand for specialty fibers with low environmental impacts continues to grow structurally. We see enormous growth potential in Asia in particular. Through our investments in Indonesia and also at other Lenzing sites worldwide, we are in a better position to serve this growing demand. At the same time, we continue working tirelessly to make the industries in which we operate even more sustainable and to drive the transformation of the textile business model from linear to circular,” says Stephan Sielaff, Chief Executive Officer of the Lenzing Group.

More information:
Lenzing speciality fibers indonesia
Source:

Lenzing AG

TCO 21XL (c) Trützschler Group SE
31.08.2023

TCO 21XL: 12 heads boost production

TRÜTZSCHLER Spinning presents an innovation for the textile machinery market: the high-performance comber TCO 21XL with 12 combing heads. For many decades, eight combing heads has been considered state-of-the-art in the spinning industry. Now, Trützschler’s advanced technology and engineering proves that it is possible to build a heavy-duty comber that maximizes productivity by 50 % and saves space without compromising on quality.

They say two heads are better than one, so just imagine what 12 heads can do! That’s the simple but effective idea behind the TCO 21XL. Increasing the number of combing heads by 50 % makes it possible to increase productivity by 50 %, enabling rates of up to 150 kg/h. As a result, two TCO 21XL combers offer the same production capacity as three conventional combers. And that means companies that buy and operate two machines instead of three can achieve significant benefits in terms of their price-performance-ratio (cost/kg). The costs of running the machines are broken down into 12 instead of eight heads, making the machine more cost-effective over its entire operating life.

TRÜTZSCHLER Spinning presents an innovation for the textile machinery market: the high-performance comber TCO 21XL with 12 combing heads. For many decades, eight combing heads has been considered state-of-the-art in the spinning industry. Now, Trützschler’s advanced technology and engineering proves that it is possible to build a heavy-duty comber that maximizes productivity by 50 % and saves space without compromising on quality.

They say two heads are better than one, so just imagine what 12 heads can do! That’s the simple but effective idea behind the TCO 21XL. Increasing the number of combing heads by 50 % makes it possible to increase productivity by 50 %, enabling rates of up to 150 kg/h. As a result, two TCO 21XL combers offer the same production capacity as three conventional combers. And that means companies that buy and operate two machines instead of three can achieve significant benefits in terms of their price-performance-ratio (cost/kg). The costs of running the machines are broken down into 12 instead of eight heads, making the machine more cost-effective over its entire operating life.

50 % higher productivity is great – and it can be even greater if the machine is operated with JUMBO cans. The can changer needs to keep up with the extra performance, and JUMBO cans can easily collect the additional output of the TCO 21XL because they feature a 1200 mm diameter. This makes it possible to minimize non-productive time when changing cans. Anybody who is planning a new spinning mill knows that every square meter of space adds to the overall costs. The new TCO 21XL comber offers huge benefits in this regard because 25 % less floor space is required to operate same number of combing heads. This reduces the initial building costs, while also decreasing operating costs related to lighting, air conditioning and other overheads.

Source:

Trützschler Group SE

31.08.2023

Renewcell’s CEO Patrik Lundström with new shares

Re:NewCell AB’s Chief Executive Officer, Patrik Lundström, has today exercised 6,970 warrants of series 2019/2023 in the Company for subscription of 453,050 new shares in the Company at a subscription price of SEK 48.43 per share. Patrik Lundström has previously exercised 3,494 warrants of series 2019/2023 for the subscription of 227,110 new shares in the Company. All warrants of series 2019/2023 have thus been exercised.

On 27 July 2023, Patrik Lundström sold shares in the Company for the purpose of using the sale proceeds in connection with an exercise of warrants of series 2019/2023 and intends to sell additional existing shares to enable payment of all shares that have been subscribed for today. The Board of Directors of the Company has resolved to extend the period for payment of the new shares up to and including 19 October 2023 to enable an orderly divestment.

Re:NewCell AB’s Chief Executive Officer, Patrik Lundström, has today exercised 6,970 warrants of series 2019/2023 in the Company for subscription of 453,050 new shares in the Company at a subscription price of SEK 48.43 per share. Patrik Lundström has previously exercised 3,494 warrants of series 2019/2023 for the subscription of 227,110 new shares in the Company. All warrants of series 2019/2023 have thus been exercised.

On 27 July 2023, Patrik Lundström sold shares in the Company for the purpose of using the sale proceeds in connection with an exercise of warrants of series 2019/2023 and intends to sell additional existing shares to enable payment of all shares that have been subscribed for today. The Board of Directors of the Company has resolved to extend the period for payment of the new shares up to and including 19 October 2023 to enable an orderly divestment.

More information:
Renewcell shares
Source:

Renewcell

30.08.2023

Autoneum: Half-Year Results 2023

Autoneum's consolidated revenue increased by 24.1% from CHF 888.7 million to CHF 1 102.6 million in the first half of 2023. The Group grew significantly both organically, thanks to a market recovery in Europe and North America, and inorganically, through the acquisition of the traditional German company Borgers. All business units improved their profitability compared to the prior-year period. EBIT adjusted for special effects increased by CHF 33.0 million to CHF 45.0 million and the EBIT margin rose from 1.4% to 4.1% compared to the prior-year period. EBIT rose by CHF 78.5 million to CHF 84.9 million in the same period, with an increase in EBIT margin of 7.0 percentage points to 7.7%. Autoneum achieved a solid net result of CHF 57.8 million. Business Group North America nearly reached break-even point before special effects. As planned, the Borgers units, consolidated for the first time in the second quarter, made a positive contribution to the overall result from day one.

Autoneum's consolidated revenue increased by 24.1% from CHF 888.7 million to CHF 1 102.6 million in the first half of 2023. The Group grew significantly both organically, thanks to a market recovery in Europe and North America, and inorganically, through the acquisition of the traditional German company Borgers. All business units improved their profitability compared to the prior-year period. EBIT adjusted for special effects increased by CHF 33.0 million to CHF 45.0 million and the EBIT margin rose from 1.4% to 4.1% compared to the prior-year period. EBIT rose by CHF 78.5 million to CHF 84.9 million in the same period, with an increase in EBIT margin of 7.0 percentage points to 7.7%. Autoneum achieved a solid net result of CHF 57.8 million. Business Group North America nearly reached break-even point before special effects. As planned, the Borgers units, consolidated for the first time in the second quarter, made a positive contribution to the overall result from day one.

Economic conditions in the automotive supply industry improved in the first half of 2023 compared to the prior-year period. There was a slight easing of supply chains and a rise in production volumes among vehicle manufacturers already in the first quarter of 2023. This was especially true in markets that had previously been heavily impacted by supply chain bottlenecks.

Global automobile production climbed by 11.8%* compared with the prior-year period, although consumer demand was somewhat dampened by high vehicle prices in some markets. In this improved market environment and supported by the acquisition of the automotive business from Borgers, a long-standing German company, as of April 1, 2023, Autoneum increased its revenue and net result substantially in the first six months compared with the same period of the previous year.

  • Positive revenue development supported by inorganic growth
  • Significant improvement of operational profitability and solid net profit
  • Equity ratio influenced by the acquisition of Borgers Automotive
  • Creation of a capital band
  • Business Groups
  • Integration of Borgers automotive business
  • Working on behalf of electromobility with sustainable noise absorption in underbody
  • shields
  • Change to the Group Executive Board
  • SBTi recognizes Autoneum’s science-based targets

Outlook unchanged
According to the current S&P market forecasts, it is expected that global automobile production will climb by 5.7%* in 2023 compared with 2022. Autoneum anticipates that production volumes in the various regions will develop in line with the forecasts. Customer negotiations are ongoing and Autoneum expects that the increase in costs for raw materials, energy, transportation and staff will be completely offset in the second half of the year. Based on the forecast market development and the renegotiated customer agreements, Autoneum confirms the outlook that it published in March 2023. The Company expects total revenue of CHF 2.4 to 2.5 billion at unchanged exchange rates for the financial year 2023, an EBIT margin of 3.5% to 4.5% excluding one-time effects and a free cash flow in the higher double-digit millions, excluding acquisition-related net cash outflows.

For more information, see attached document.

*Source: S&P market forecast – August 15, 2023

Source:

Autoneum Management AG

Jeff Journey joins BW Packaging as Vice President of Aftermarket (c) Barry-Wehmiller
Jeff Journey, Vice President of Aftermarket
30.08.2023

Jeff Journey joins BW Packaging as Vice President of Aftermarket

BW Packaging, Barry-Wehmiller’s global team of packaging professionals, announces that Jeff Journey has joined the company as the Vice President of Aftermarket. In his new role, he will work with BW Packaging divisional aftermarket leaders and digital innovation teams to drive strategic plans that leverage technology, tools and business process optimization to create new value for customers.

Journey also will review BW Packaging’s existing portfolio of aftermarket products and services —including the rapid delivery of spare and replacement parts, customer and field service programs, and operator training (in-house and onsite) — and will determine how best to maximize these solutions.

Journey brings a wealth of expertise to his new position. Recently, he served as a key leader at Thermo Fisher Scientific’s Life Sciences group, spearheading strategy, innovation, marketing and sales for the $300M-plus global service and support business. Under his guidance, Thermo Fisher underwent a successful digital transformation of its service model, resulting in improved instrument uptime and service contract revenue.

BW Packaging, Barry-Wehmiller’s global team of packaging professionals, announces that Jeff Journey has joined the company as the Vice President of Aftermarket. In his new role, he will work with BW Packaging divisional aftermarket leaders and digital innovation teams to drive strategic plans that leverage technology, tools and business process optimization to create new value for customers.

Journey also will review BW Packaging’s existing portfolio of aftermarket products and services —including the rapid delivery of spare and replacement parts, customer and field service programs, and operator training (in-house and onsite) — and will determine how best to maximize these solutions.

Journey brings a wealth of expertise to his new position. Recently, he served as a key leader at Thermo Fisher Scientific’s Life Sciences group, spearheading strategy, innovation, marketing and sales for the $300M-plus global service and support business. Under his guidance, Thermo Fisher underwent a successful digital transformation of its service model, resulting in improved instrument uptime and service contract revenue.

Source:

Barry-Wehmiller