From the Sector

Reset
1053 results
B.I.G. YARNS awarded HPR status for second European plant © Beaulieu International Group
B.I.G. YARNS awarded HPR status for second European plant.
07.09.2021

B.I.G. YARNS awarded HPR status for second European plant

  • FM Global ‘Highly Protected Risk’ Achievement Award for Komen site, Belgium
  • Completes HPR Award status for B.I.G. YARNS’ European production facilities
  • Fifth plant in Beaulieu International Group to attain HPR Award

B.I.G. YARNS is proud to announce the attainment of a FM Global ‘Highly Protected Risk’ Achievement Award (HPR Award) for its yarn production facility in Komen, Belgium.

The HPR Award is assigned by insurer FM Global, Beaulieu International Group’s insurance partner of the past five years in its on-going dedication to property loss prevention. A worldwide team of engineers focuses on providing assistance and protection of B.I.G.’s assets, helping the Group to achieve a higher level of risk protection. The FM Global assessment considers implementation of measures to protect against fire, natural hazard, mechanical breakdown of machinery and also cyber risks. The local team worked diligently over the last five years to implement all the FM Global recommendations.

  • FM Global ‘Highly Protected Risk’ Achievement Award for Komen site, Belgium
  • Completes HPR Award status for B.I.G. YARNS’ European production facilities
  • Fifth plant in Beaulieu International Group to attain HPR Award

B.I.G. YARNS is proud to announce the attainment of a FM Global ‘Highly Protected Risk’ Achievement Award (HPR Award) for its yarn production facility in Komen, Belgium.

The HPR Award is assigned by insurer FM Global, Beaulieu International Group’s insurance partner of the past five years in its on-going dedication to property loss prevention. A worldwide team of engineers focuses on providing assistance and protection of B.I.G.’s assets, helping the Group to achieve a higher level of risk protection. The FM Global assessment considers implementation of measures to protect against fire, natural hazard, mechanical breakdown of machinery and also cyber risks. The local team worked diligently over the last five years to implement all the FM Global recommendations.

Emmanuel Colchen, General Manager B.I.G. YARNS, comments: “Achieving the prestigious HPR Award recognizes the commitment of the teams at B.I.G. YARNS and the wider Beaulieu International Group to proactive risk management and contingency planning to ensure the safety and protection of our workplaces. Safeguarding property is a key element in enabling us to provide business continuity for our customers in demanding sectors like automotive, commercial contract and residential flooring.”

B.I.G. YARNS’ Komen production facility is the fifth plant at B.I.G. to receive HPR status - the highest level a plant can achieve for fire risk prevention and protection.

The Yarns division of Beaulieu International Group achieved HPR status for its other European site in Comines, France, in 2017.

(c) Oerlikon. Oerlikon Nonwoven OSR spunmelt technology
Oerlikon Nonwoven OSR spunmelt technology
03.09.2021

Oerlikon Nonwoven at INDEX: Focus on nonwoven products

„Your reliable partner in the nonwoven industry“ – the slogan speaks for itself: Oerlikon Nonwoven is exhibiting at the world’s leading nonwovens trade fair – the INDEX in Geneva, Switzerland (October 19-22, 2021) – with one of the market’s broadest portfolios. The Neumünster-based systems constructor will be focusing on market- and customer-oriented system solutions for filtration, hygiene, medical, geotextile and other industrial applications. Trade fair visitors can delve deep into the company’s comprehensive product and process know-how both live at trade fair stand no. 2314 and via the INDEX online platform.

  • Nonwovens for filtration, insulation and sorption applications
  • Comprehensive spunbond portfolio
  • Quality Sized Right-Technology: spunmelt systems for the hygiene and medical market
  • Wipes using Oerlikon's Phantom technology
  • Airlaid technology for sustainable nonwovens

„Your reliable partner in the nonwoven industry“ – the slogan speaks for itself: Oerlikon Nonwoven is exhibiting at the world’s leading nonwovens trade fair – the INDEX in Geneva, Switzerland (October 19-22, 2021) – with one of the market’s broadest portfolios. The Neumünster-based systems constructor will be focusing on market- and customer-oriented system solutions for filtration, hygiene, medical, geotextile and other industrial applications. Trade fair visitors can delve deep into the company’s comprehensive product and process know-how both live at trade fair stand no. 2314 and via the INDEX online platform.

  • Nonwovens for filtration, insulation and sorption applications
  • Comprehensive spunbond portfolio
  • Quality Sized Right-Technology: spunmelt systems for the hygiene and medical market
  • Wipes using Oerlikon's Phantom technology
  • Airlaid technology for sustainable nonwovens
More information:
Oerlikon Nonwoven INDEX
Source:

Oerlikon

Sappi with new print products at the FESPA Global Print Expo 2021 (c) Sappi Europe
02.09.2021

Sappi with new print products at the FESPA Global Print Expo 2021

Sappi will be presenting its inkjet papers for large-format applications alongside its new Fusion Nature Plus containerboard and a variety of silicone-based papers at the FESPA Global Print Expo from 12-15 October 2021 in Amsterdam.

The new Transjet Tacky Industrial is a coated sublimation paper for digital transfer printing – specially developed for high-speed inkjet printing on highly elastic textiles. Also new in the portfolio is the Basejet uncoated sublimation paper, designed for the digital printing of fashion and home textiles, especially light-coloured designs.
Papers consist of 100% recyclable pulp and are FSC-certified.

In Amsterdam, Sappi will also be demonstrating its inkjet papers for large-format applications. Scrolljet is suitable for outdoor applications including City Light and Mega Light systems. It stands out thanks its enhanced whiteness, high colour density and good line sharpness, alongside tear resistance and UV print protection. For indoor graphics and posters, Swiss Matt reveals its unique advantages of accuracy and pin-sharp lines.

Sappi will be presenting its inkjet papers for large-format applications alongside its new Fusion Nature Plus containerboard and a variety of silicone-based papers at the FESPA Global Print Expo from 12-15 October 2021 in Amsterdam.

The new Transjet Tacky Industrial is a coated sublimation paper for digital transfer printing – specially developed for high-speed inkjet printing on highly elastic textiles. Also new in the portfolio is the Basejet uncoated sublimation paper, designed for the digital printing of fashion and home textiles, especially light-coloured designs.
Papers consist of 100% recyclable pulp and are FSC-certified.

In Amsterdam, Sappi will also be demonstrating its inkjet papers for large-format applications. Scrolljet is suitable for outdoor applications including City Light and Mega Light systems. It stands out thanks its enhanced whiteness, high colour density and good line sharpness, alongside tear resistance and UV print protection. For indoor graphics and posters, Swiss Matt reveals its unique advantages of accuracy and pin-sharp lines.

Sappi's new Fusion Nature Plus is all about corrugated packaging, POS displays, shelf-ready packaging and carrier bags.

The products from the Silicone Base Papers range – for self-adhesive applications such as car wrapping, outdoor advertising and office materials – complete this year’s Sappi FESPA Global Print Expo portfolio.

01.09.2021

CELLIANT® viscose - Kelheim Fibres and Hologenix® partnering

Kelheim Fibres, a leading manufacturer of viscose specialty fibers, and Hologenix®, creators of CELLIANT®, a responsive textile using infrared technology, partnered to create CELLIANT® viscose, a combination of nature and performance.

CELLIANT viscose in blends with cotton, regular viscose, MicroModal®, lyocell and wool offers a range of varieties. Among the many applications, it is especially suitable for performance wear, luxury loungewear, casual wear, bedding, towels and beauty.

CELLIANT viscose features natural, ethically sourced minerals embedded into plant-based fibers to create infrared products that capture and convert body heat into infrared, improving cellular oxygenation.

Kelheim’s flexible technology permits targeted interventions in the viscose fiber process and delivers this fiber that provides full functionality without the need for any additional processing steps, while impressing with a softer feel and cost and time savings compared to coated fabrics.

Kelheim Fibres, a leading manufacturer of viscose specialty fibers, and Hologenix®, creators of CELLIANT®, a responsive textile using infrared technology, partnered to create CELLIANT® viscose, a combination of nature and performance.

CELLIANT viscose in blends with cotton, regular viscose, MicroModal®, lyocell and wool offers a range of varieties. Among the many applications, it is especially suitable for performance wear, luxury loungewear, casual wear, bedding, towels and beauty.

CELLIANT viscose features natural, ethically sourced minerals embedded into plant-based fibers to create infrared products that capture and convert body heat into infrared, improving cellular oxygenation.

Kelheim’s flexible technology permits targeted interventions in the viscose fiber process and delivers this fiber that provides full functionality without the need for any additional processing steps, while impressing with a softer feel and cost and time savings compared to coated fabrics.

Dominik Mayer, Kelheim’s Project Manager for Fibre & Application Development, and Courtney OKeefe, Hologenix’s Chief Supply Officer, will share the story behind the development of CELLIANT® viscose and how this first in-fiber sustainable solution on the market was developed. They will present at a webinar during the Dornbirn Global Fiber Conference Thursday, September 16, at 5:50 pm CEST.

Source:

Kelheim Fibres

01.09.2021

CHT Group generates 62% of 2020 sales with sustainable products

  • Sustainability Report 2020 published

As an internationally positioned company, the CHT Group is one of the leading suppliers of speciality chemicals. The company supplying chemical products for the most diverse applications and industries, presented their annual edition of the Sustainability Report, for the period January to December 2020,

The report has been prepared in accordance with the standards of the Global Reporting Initiative (GRI) and is based on the Core option. The focus is on human resources development, energy and water consumption as well as company-wide emissions and waste management.

Particularly noteworthy here is the group-wide reduction in specific resource consumption in the areas under review. In relation to the volume produced, for example, the following key figures show the reduction of environmental impacts:

  • Sustainability Report 2020 published

As an internationally positioned company, the CHT Group is one of the leading suppliers of speciality chemicals. The company supplying chemical products for the most diverse applications and industries, presented their annual edition of the Sustainability Report, for the period January to December 2020,

The report has been prepared in accordance with the standards of the Global Reporting Initiative (GRI) and is based on the Core option. The focus is on human resources development, energy and water consumption as well as company-wide emissions and waste management.

Particularly noteworthy here is the group-wide reduction in specific resource consumption in the areas under review. In relation to the volume produced, for example, the following key figures show the reduction of environmental impacts:

  • 21% share of renewable energies in total consumption
  • 440,000 EUR investment in environmental protection and nature conservation
  • 5.8% less energy consumption and less CO2 emission

62% of CHT Group's 2020 sales were generated with sustainable products. For this, 91% of the strategic raw material volume was sourced from suppliers classified as sustainable.

At the center of the report are the current working topics and outlooks that showcase CHT's commitment to sustainability and its innovative strength to achieve the United Nations Sustainable Development Goals (SDGs).

CHT considers 11 of the SDGs to be particularly relevant for the future of the Group of companies. For this reason, the recently revised global corporate strategy is directly geared to the Sustainable Development Goals of the United Nations.

The current edition of the report, which is published for the first time exclusively online in a resource-saving manner, is available here: https://sustainability-report.cht.com

More information:
CHT Group Sustainability Report
Source:

CHT Gruppe

Andritz AG. ANDRITZ Laroche Recycling Line
01.09.2021

ANDRITZ at INDEX20

International technology Group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at INDEX20 in Geneva, Switzerland, from October 19 to 22. The broad ANDRITZ product portfolio covers state-of-the-art nonwovens and textile production technologies such as air-through bonding, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, airlay, recycling, and natural fiber processing.

One highlight at INDEX will be the new member of the ANDRITZ Nonwoven division: ANDRITZ Laroche – a company that has been an important partner for ANDRITZ in the field of fiber preparation for drylaid nonwovens for over 10 years. ANDRITZ Laroche is a leading supplier of fiber processing technologies such as opening, blending and dosing, airlay web forming, textile waste recycling, and decortication of bast fibers.

International technology Group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at INDEX20 in Geneva, Switzerland, from October 19 to 22. The broad ANDRITZ product portfolio covers state-of-the-art nonwovens and textile production technologies such as air-through bonding, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, airlay, recycling, and natural fiber processing.

One highlight at INDEX will be the new member of the ANDRITZ Nonwoven division: ANDRITZ Laroche – a company that has been an important partner for ANDRITZ in the field of fiber preparation for drylaid nonwovens for over 10 years. ANDRITZ Laroche is a leading supplier of fiber processing technologies such as opening, blending and dosing, airlay web forming, textile waste recycling, and decortication of bast fibers.

One focus of this product range is complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end-uses. Customer awareness and regulations are pushing clothing brands to recycle their textile waste in their own products. Recycled fibers can also be used in the nonwovens industry for various applications, such as automotive, insulation, mattresses, and furniture felts.

Source:

Andritz AG

31.08.2021

DSM and SABIC: Creating recycled-based Dyneema®

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, and SABIC, a global leader in the chemical industry, announced a collaboration to create recycled-based Dyneema®. Through a joint pilot with multiple CirculariTeam® members, the manufacturing and usage of Dyneema® using mixed plastic waste as feedstock (via mass balance approach) will be successfully demonstrated. It is an important step toward the future goal of fully closing the loop by delivering Dyneema® made from ultra-high molecular weight polyethylene (UHMwPE) waste. This collaboration underlines DSM’s and SABIC’s efforts to accelerate a circular economy for materials.

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, and SABIC, a global leader in the chemical industry, announced a collaboration to create recycled-based Dyneema®. Through a joint pilot with multiple CirculariTeam® members, the manufacturing and usage of Dyneema® using mixed plastic waste as feedstock (via mass balance approach) will be successfully demonstrated. It is an important step toward the future goal of fully closing the loop by delivering Dyneema® made from ultra-high molecular weight polyethylene (UHMwPE) waste. This collaboration underlines DSM’s and SABIC’s efforts to accelerate a circular economy for materials.

By working together with members of CirculariTeam®, DSM will produce recycled-based Dyneema® made using SABIC’s certified circular ethylene as a pilot project in both a sailing rope and a pelagic trawl net application. The circular ethylene, from SABIC’s TRUCIRCLE™ portfolio, uses mixed plastic waste as feedstock (mass balance approach), which not only contributes to preventing valuable plastic from becoming waste and the avoidance of carbon emissions compared to incineration, but it will also help preserve fossil resources. These pilots are an important early-stage milestone in the journey toward making fully circular Dyneema® from HMPE post-production and post-consumer waste.

Jon Mitchell, Managing Director at Marlow Ropes: “We’re proud to be one of the first manufacturers to integrate recycled-based Dyneema® within our products and demonstrate the material’s feasibility. By collaborating with materials science pioneers such as DSM and SABIC, we are able to create products that not only deliver superlative functional performance but also have a lower environmental impact. Our products are trialed and tested by professional offshore sailing teams including 11th Hour Racing Team, a proud partner of ours at Marlow, with whom we share a progressive approach to seeking sustainable solutions: no more business as usual."

Klaus Walther, Managing Director at Gleistein: “Warm congratulations to DSM and SABIC for pushing the boundaries of science to deliver a truly unique product. We’re proud that our ropes can be produced from what once was typical household plastic waste. This is an important stepping stone towards becoming circular. It will enable our customer Maritiem BV to further develop high-tech fishing gear whilst contributing to the circular economy. Not to forget Cornelis Vrolijk Fishing Company, who again illustrate their commitment to Corporate Social Responsibility by introducing this concept in fishery.”

More information:
DSM Dyneema SABIC plastic waste
Source:

EMG for DSM

30.08.2021

Changes in the Rieter Board of Directors

  • Luc Tack und Stefaan Haspeslagh resign with immediate effect

The two members of the Board of Directors Luc Tack und Stefaan Haspeslagh announced on August 30, 2021, that they are resigning from the Board of Directors with immediate effect.

Rieter will inform the law enforcement authorities that there is no interest in continuing the criminal proceedings any further.

The Board of Directors welcomes the fact that a joint solution was found that is in the best interests of Rieter and Picanol, both of which are among the world’s leading textile machinery manufacturers.

According to Luc Tack, the Picanol Group (Belgium) will remain a shareholder of Rieter.

 

  • Luc Tack und Stefaan Haspeslagh resign with immediate effect

The two members of the Board of Directors Luc Tack und Stefaan Haspeslagh announced on August 30, 2021, that they are resigning from the Board of Directors with immediate effect.

Rieter will inform the law enforcement authorities that there is no interest in continuing the criminal proceedings any further.

The Board of Directors welcomes the fact that a joint solution was found that is in the best interests of Rieter and Picanol, both of which are among the world’s leading textile machinery manufacturers.

According to Luc Tack, the Picanol Group (Belgium) will remain a shareholder of Rieter.

 

Source:

Rieter Management AG

30.08.2021

Biden Administration Awards $6.5M Contract to US Cotton LLC

  • Ramping Up Production of American-Made Polyester Tipped Swabs

The Biden Administration has awarded a contract for $6.5 million to U.S. Cotton LLC, the largest manufacturer of cotton swabs in the United States, to increase domestic production capability for polyester tipped swabs for home testing kits and mass testing applications to fight the COVID-19 pandemic.  Since the beginning of the pandemic, U.S. Cotton has retooled operations to produce over 400 million COVID testing kit swabs.

The Department of Defense (DOD), in coordination with the Department of Health and Human Services (HHS), announced the award today as part of the administration’s broader effort to increase domestic production capability for essential medical supplies.

U.S. Cotton, based in Cleveland, Ohio, said the company will increase its production capacity from 92 million polyester swab tips per month to approximately 371 million polyester swab tips per month by May 2022 to support domestic COVID-19 testing. The DOD contract award was funded through the American Rescue Plan Act (ARPA) to support the domestic industry base expansion for critical medical resources.

  • Ramping Up Production of American-Made Polyester Tipped Swabs

The Biden Administration has awarded a contract for $6.5 million to U.S. Cotton LLC, the largest manufacturer of cotton swabs in the United States, to increase domestic production capability for polyester tipped swabs for home testing kits and mass testing applications to fight the COVID-19 pandemic.  Since the beginning of the pandemic, U.S. Cotton has retooled operations to produce over 400 million COVID testing kit swabs.

The Department of Defense (DOD), in coordination with the Department of Health and Human Services (HHS), announced the award today as part of the administration’s broader effort to increase domestic production capability for essential medical supplies.

U.S. Cotton, based in Cleveland, Ohio, said the company will increase its production capacity from 92 million polyester swab tips per month to approximately 371 million polyester swab tips per month by May 2022 to support domestic COVID-19 testing. The DOD contract award was funded through the American Rescue Plan Act (ARPA) to support the domestic industry base expansion for critical medical resources.

John Nims, President of U.S. Cotton said, “We are proud to be involved in a national effort to help deploy these testing kit swabs for the American people. These swabs are designed to make it easier for people at home to self-administer coronavirus tests and will also be used for mass testing applications, which is critically important. We greatly appreciate the collaboration with DOD and HHS to ramp up essential capacity of polyester-based synthetic swabs that will help in the fight against the pandemic.

“We continue to step up to meet our nation’s critical need for American-made coronavirus testing kit swabs on a massive scale. It is an honor to work with our government to help fight this pandemic and use our innovative technologies based here in the United States to fill a national and global demand for testing kits. I especially want to thank Senator Brown and Senator Portman for all their incredible support to help us retool and expand our operations in Cleveland. We can’t thank them enough for their tireless work and also want to recognize their hard working staff. As the Delta variant surges across the country, this timely investment will help in the fight against COVID by adding this much-needed, long-term surge capacity.”

Kim Glas, President and CEO of NCTO, said, “We want to sincerely thank President Biden, the Department of Defense, and the Department of Health and Human Services for leading this critical industrial expansion effort. We appreciate the administration’s commitment to expand the U.S. industrial base for these essential products.  We have a once-in-a-generation opportunity to onshore these critical supply chains long-term and we look forward to working with the administration and Congress to advance long-term solutions.”

More information:
corona virus NCTO
Source:

NCTO

(c) Autoneum
Claudia Güntert
27.08.2021

Autoneum appoints new Head of Corporate Communications

Claudia Güntert has been appointed Head of Corporate Communications at Autoneum as of November 1, 2021. She succeeds the Corporate Communications Head, Dr. Anahid Rickmann, who will be leaving the company per end of August 2021.

Claudia Güntert studied Jurisprudence at the University of Basel, Switzerland, as well as German and Eastern European Literature at the Universities of Basel and Zurich, Switzerland.

From 2008 to 2013, she was Marketing & Product Communications Manager at Von Roll Management AG in Wädenswil, Switzerland. She thereby gained broad experience in marketing and customer communications in the industry and a deep understanding of the industrial relations between suppliers and their customers. From 2013 until 2021, she was Head of Corporate Communications & Investor Relations at Von Roll Holding AG in Wädenswil and Breitenbach, Switzerland. In this leading position, she expanded her expertise in internal and external communication with a focus on company vision and strategy, branding, global change management, and social media presence. Claudia Güntert will report to Matthias Holzammer, CEO.

Claudia Güntert has been appointed Head of Corporate Communications at Autoneum as of November 1, 2021. She succeeds the Corporate Communications Head, Dr. Anahid Rickmann, who will be leaving the company per end of August 2021.

Claudia Güntert studied Jurisprudence at the University of Basel, Switzerland, as well as German and Eastern European Literature at the Universities of Basel and Zurich, Switzerland.

From 2008 to 2013, she was Marketing & Product Communications Manager at Von Roll Management AG in Wädenswil, Switzerland. She thereby gained broad experience in marketing and customer communications in the industry and a deep understanding of the industrial relations between suppliers and their customers. From 2013 until 2021, she was Head of Corporate Communications & Investor Relations at Von Roll Holding AG in Wädenswil and Breitenbach, Switzerland. In this leading position, she expanded her expertise in internal and external communication with a focus on company vision and strategy, branding, global change management, and social media presence. Claudia Güntert will report to Matthias Holzammer, CEO.

Dr. Anahid Rickmann leaves Autoneum at the end of August at her own request. After almost nine years of service, she has decided to take on a new professional challenge. Anahid Rickmann strategically realigned the Company's communications after it became independent in 2011 and significantly shaped Autoneum's external perception and reputation. Her particular achievements include the measurable success of external communications, brand positioning and the launch of Autoneum's corporate responsibility strategy. CEO Matthias Holzammer and the Board of Directors would like to thank Anahid Rickmann sincerely for her successful, always dedicated and loyal service to Autoneum and wish her the best for her personal and professional future.

For September and October 2021, Luzia Schoeck, Communications Manager, will act as interim Head of Corporate Communications.

More information:
Autoneum Autoneum Management AG
Source:

Autoneum

Graphical material: Borealis
26.08.2021

Drinking cups using chemically recycled polypropylene

Swiss dairy company Emmi is partnering with Borealis and Greiner Packaging to produce iced coffed drinking cups using chemically recycled polypropylene.

The cups are produced by Greiner Packaging and the chemically recycled material comes from Borealis, one of the world’s leading providers of advanced and circular polyolefin solutions based in Vienna, Austria.

Emmi, Switzerland’s largest milk processor is committed to climate protection and the circular economy. The dairy company has the stated goal to make all of its packaging 100% recyclable and is committed to various measures to promote circularity such as packaging that contains at least 30% recyclate by 2027.

Swiss dairy company Emmi is partnering with Borealis and Greiner Packaging to produce iced coffed drinking cups using chemically recycled polypropylene.

The cups are produced by Greiner Packaging and the chemically recycled material comes from Borealis, one of the world’s leading providers of advanced and circular polyolefin solutions based in Vienna, Austria.

Emmi, Switzerland’s largest milk processor is committed to climate protection and the circular economy. The dairy company has the stated goal to make all of its packaging 100% recyclable and is committed to various measures to promote circularity such as packaging that contains at least 30% recyclate by 2027.

From September 2021 Emmi will use at least 100 tonnes of plastic based on the recycled material each year. Chemical recycling renews plastic back to plastic creating recycled materials with a level of purity equivalent to fossil-fuel based PP and hence, fit for protective, food-safe and other demanding applications. In this way, Emmi is utilizing difficult to recycle feedstock preventing plastic waste that would be likely landfilled or incinerated. In the future, depending on the availability of suitable material, the amount of recycled plastic in packaging is to be further increased.

The new technology to recover the polypropylene is currently still in its infancy, where Greiner Packaging and Borealis are leading the way. Only limited quantities of chemically recycled polypropylene are currently available, and Emmi is one of only a few food manufacturers to have secured a share of the chemically recycled polypropylene plastic through its early commitment and long-standing collaboration with the development companies.

The chemically recycled material used for the cups consists entirely and solely of ISCC (International Sustainability & Carbon Certification) material, on a mass balance basis. Mass balance is a methodology that makes it possible to track the amount and sustainability characteristics of circular and/or bio-based content in the value chain and through each step of the process. This provides transparency ultimately also to the consumers, enabling them to know that the product they are buying is based on this renewable material.

More information:
Polypropylen Borealis
Source:

Borealis

3D-Lofter. Photo: (c) DiloGroup
26.08.2021

DiloGroup at INDEX

After a long break, the international nonwovens industry will meet again in Geneva, Switzerland, from October 19 to 22, 2021 on the occasion of INDEX. DiloGroup offers tailormade production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further by using the new needle pattern 8000X which is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

After a long break, the international nonwovens industry will meet again in Geneva, Switzerland, from October 19 to 22, 2021 on the occasion of INDEX. DiloGroup offers tailormade production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further by using the new needle pattern 8000X which is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

The “3D-Lofter” which was first presented during ITMA 2019 in Barcelona offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts are two examples for this technology which explores new application areas for needlefelts The 3D-Lofter technology may also be used “inverted” for filling up bad spots in web mats and thus achieves a better homogeneity of e. g. spunlace, thermobond or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

Apart from machines for needling technology we offer in cooperation with partner companies also production lines including thermobonding and hydroentangling components.

More information:
DiloGroup Dilo INDEX
Source:

DiloGroup

26.08.2021

Kelheim Fibres at Dornbirn GFC WEBINAR WEEK

  • Circular economy at Kelheim Fibres: Examples of innovation from raw material, product design and all the way to “end of life”

Kelheim Fibres, the world's first viscose fibre manufacturer with an EMAS-certified environmental management system, is continuously working on optimising its special fibres. These can be functionalised as needed - in many cases to save further processing steps (such as dyeing or coating) and thus energy, water and chemicals - and are completely biodegradable at the end of their product life in a short time (according to OECD Test 301 B).

Currently, the specialists in Kelheim are working on the development of alternative raw materials for the production of viscose fibres, such as recycled cellulose as well as other cellulose-containing starting materials. One approach to closing the product cycle in the textile sector is the use of pulp produced from recycled post-consumer waste materials.

  • Circular economy at Kelheim Fibres: Examples of innovation from raw material, product design and all the way to “end of life”

Kelheim Fibres, the world's first viscose fibre manufacturer with an EMAS-certified environmental management system, is continuously working on optimising its special fibres. These can be functionalised as needed - in many cases to save further processing steps (such as dyeing or coating) and thus energy, water and chemicals - and are completely biodegradable at the end of their product life in a short time (according to OECD Test 301 B).

Currently, the specialists in Kelheim are working on the development of alternative raw materials for the production of viscose fibres, such as recycled cellulose as well as other cellulose-containing starting materials. One approach to closing the product cycle in the textile sector is the use of pulp produced from recycled post-consumer waste materials.

In production, Kelheim Fibres focuses on resource conservation by minimising emissions and waste through closed-loop recovery systems, as well as through highly efficient energy generation and the corresponding operation of the plants.

Dr. Roland Scholz, Project Manager Fibre and Application Development at Kelheim Fibres, will present details of this on Wednesday, 15 September, at 5.50 p.m., in Hall B of the 60th Dornbirn GFC WEBINAR WEEK.


Translated with www.DeepL.com/Translator (free version)

Source:

Kelheim Fibres

(c) Autefa
25.08.2021

Swiss Textile Machinery: Top Technology for Nonwovens

Originally conceived as a low-cost, high-volume alternative to knitting and weaving, nonwovens was already expanding its market boundaries by the 1970s with new applications in ‘disposables’ such as diapers, hygiene and teabags.

In the past five decades, the nonwovens business has exploded in all directions, reaching a global market worth USD 40.5 billion in 2020, projected to grow to USD 53.5 billion by 2025. This annual growth rate of 5.7% (MarketsandMarkets, Nonwoven Fabric Market Report) is based on countless new applications and expansion into durable, as well as additional disposable, products.

Major growth drivers include the hygiene sector, and filtration media for power plants and air conditioning systems. Especially during the peak of the COVID pandemic in 2020 and 2021, demand in the hygiene sector multiplied. Worldwide capacities for both meltblown and spunlace production rocketed compared to a normal business year. Swiss Autefa Solutions, for example, significantly benefited from this trend, notably with the launch of a fully-automatic machine for producing face masks.

Originally conceived as a low-cost, high-volume alternative to knitting and weaving, nonwovens was already expanding its market boundaries by the 1970s with new applications in ‘disposables’ such as diapers, hygiene and teabags.

In the past five decades, the nonwovens business has exploded in all directions, reaching a global market worth USD 40.5 billion in 2020, projected to grow to USD 53.5 billion by 2025. This annual growth rate of 5.7% (MarketsandMarkets, Nonwoven Fabric Market Report) is based on countless new applications and expansion into durable, as well as additional disposable, products.

Major growth drivers include the hygiene sector, and filtration media for power plants and air conditioning systems. Especially during the peak of the COVID pandemic in 2020 and 2021, demand in the hygiene sector multiplied. Worldwide capacities for both meltblown and spunlace production rocketed compared to a normal business year. Swiss Autefa Solutions, for example, significantly benefited from this trend, notably with the launch of a fully-automatic machine for producing face masks.

The automotive industry is the second big growth area, with many new applications being pioneered. The trend to electric and hybrid vehicles has helped this, as nonwovens reinforced with carbon fibres are widely used as battery housings.

Swiss nonwovens competence
Innovative applications across all sectors have driven the rapid evolution of sophisticated nonwovens machinery. Today’s trends demand higher productivity, sustainability and Industry 4.0 compatibility – demonstrated by the full equipment portfolio of Swiss Textile Machinery member Autefa Solutions. With V-Jet Futura, the company recently sealed the link in its product range between web forming and drying technology. This latest Hydroentanglement Machine, together with the SQ-V Square Drum Dryer, embodies advanced technology combined with significant reductions in energy consumption compared to other process solutions.

A vital contribution to nonwovens production is offered by Rieter subsidiary Graf, a leading supplier of clothing and combs for carding and combing processes in spinning and nonwovens. Graf's Hipro card clothings – suitable for any man-made fibres in the nonwovens sector – are focussing on higher productivity. Their superior performance delivers up to 10% higher throughput and greater carding efficiency compared to conventional clothings. These reliable card clothing elements also ensure a consistently reproducible high web quality, as well as 20% fewer failures in the web, thanks to the precise fibre transfer to and from the cylinder.

Another constant trend in nonwovens today is the drive for better quality. Manufacturers want to take charge of contamination levels in their processes, as well as eradicating defects which may arise during production. Uster Technologies, a leading provider of quality management solutions from fibre to fabric, offers a combined solution to achieve both these required quality standards. At the fibre preparation stage, Uster Jossi Vision Shield N ensures the best possible initial inspection and removal of contamination. Then, at the end of the production sequence, Uster EVS Fabriq Vision N handles automated detection and marking of all the main defects caused during production. This combined solution avoids material waste and takes full advantage of the potential for process optimization.

Source:

Swiss Textile Machinery Association

25.08.2021

Stahl: Full integration of PielColor

  • Strengthening leather-finishing offering

Stahl announces plans to fully integrate its leather-finishing subsidiary, PielColor, into its core business by the end of 2021. The move will see PielColor’s products and expertise brought entirely in house, strengthening Stahl’s offering to its customers while improving the visibility and reach of the PielColor brand.

Stahl acquired PielColor, a company specializing in the manufacture and marketing of chemical products for leather finishing, in 2004. The subsidiary focuses on specific customer segments within the leather market, such as high-fashion brands, and is known by customers for its support-driven and solutions-oriented approach. PielColor also offers several innovative product lines, including a range of low-impact water-based topcoats, which it is able to tailor to its customers’ requirements.

  • Strengthening leather-finishing offering

Stahl announces plans to fully integrate its leather-finishing subsidiary, PielColor, into its core business by the end of 2021. The move will see PielColor’s products and expertise brought entirely in house, strengthening Stahl’s offering to its customers while improving the visibility and reach of the PielColor brand.

Stahl acquired PielColor, a company specializing in the manufacture and marketing of chemical products for leather finishing, in 2004. The subsidiary focuses on specific customer segments within the leather market, such as high-fashion brands, and is known by customers for its support-driven and solutions-oriented approach. PielColor also offers several innovative product lines, including a range of low-impact water-based topcoats, which it is able to tailor to its customers’ requirements.

In late 2020, the decision was taken to fully integrate PielColor, positioning it alongside Stahl as a core brand within the Stahl group. Full integration will strengthen Stahl’s position in the leather-finishing market by leveraging PielColor’s well-established reputation and extensive range of innovative responsible chemistry solutions. Marketing PielColor as a Stahl group brand will also drive the visibility and market reach of PielColor products, including in regions where they are less well established.

The integration program will continue to take place over the remainder of 2021, with all parts of the PielColor business expected to be fully operational under the new structure by the end of the year.

Source:

Stahl Holdings B.V.

Photo: Centa-Star
25.08.2021

CENTA-STAR introduces Product with CELLIANT®

Materials science innovation pioneer Hologenix, LLC, whose CELLIANT® infrared technology is an ingredient in brands across many categories, has another important partner, bedding specialist Centa-Star. Based in Stuttgart, Germany and available throughout Europe, Centa-Star has introduced a new line of “Regeneration” duvets and pillows infused with CELLIANT mineralized fibers.  

Regeneration products, thanks to CELLIANT, are thermo-regulating with maximum breathability, promoting stronger performance, faster recovery and better sleep.

CELLIANT thermo-reactive minerals absorb the body heat and convert it into infrared energy, which is reflected back to the body.  The resulting temporary increase in blood flow and local circulation helps regulate body temperature and increases tissue oxygen. This leads to a more restful, restorative sleep as well as faster recovery and stronger performance.

Materials science innovation pioneer Hologenix, LLC, whose CELLIANT® infrared technology is an ingredient in brands across many categories, has another important partner, bedding specialist Centa-Star. Based in Stuttgart, Germany and available throughout Europe, Centa-Star has introduced a new line of “Regeneration” duvets and pillows infused with CELLIANT mineralized fibers.  

Regeneration products, thanks to CELLIANT, are thermo-regulating with maximum breathability, promoting stronger performance, faster recovery and better sleep.

CELLIANT thermo-reactive minerals absorb the body heat and convert it into infrared energy, which is reflected back to the body.  The resulting temporary increase in blood flow and local circulation helps regulate body temperature and increases tissue oxygen. This leads to a more restful, restorative sleep as well as faster recovery and stronger performance.

Centa-Star Regeneration products are available online throughout Europe in selected department stores in Germany, Austria and Switzerland, including KaDeWe Berlin, Betten Rid in Munich, Karstadt or Kaufhof stores, in well-sorted furniture shops, in upscale specialist shops.

More information:
Centa-Star Bedding sleep industry
Source:

Sarah P. Fletcher Communications

GRAFE: Plagiarism Protection with Marking Substances in the Plastic Matrix (c) GRAFE Advanced Polymers GmbH
23.08.2021

GRAFE: Plagiarism Protection with Marking Substances in the Plastic Matrix

To ensure product protection and prevent brand piracy, GRAFE has developed a simple and elegant solution that also offers a high level of security. The basis is special markers. "The highly complex pigments with special physical properties designed for this purpose are used in minute quantities within the plastic matrix. With an appropriately calibrated detector, products equipped with them can thus be read and authenticated," explains Business Development Manager Florian Ludwig. At the same time no changes in properties can usually be observed. The detectors can use an LED display to check within seconds whether the unique marker is contained in the product and whether this item is the original product.

To ensure product protection and prevent brand piracy, GRAFE has developed a simple and elegant solution that also offers a high level of security. The basis is special markers. "The highly complex pigments with special physical properties designed for this purpose are used in minute quantities within the plastic matrix. With an appropriately calibrated detector, products equipped with them can thus be read and authenticated," explains Business Development Manager Florian Ludwig. At the same time no changes in properties can usually be observed. The detectors can use an LED display to check within seconds whether the unique marker is contained in the product and whether this item is the original product.

In general, there are two options: x ray and light fluorescence, i.e. fluorescent X-rays or light. With the first option, the base color has no influence (not even black) and the customer benefits from low addition dosage and batch price, but this method requires higher investment. "With light fluorescence, on the other hand, detection is done by a measuring device, which is preconfigured by our partner or by us directly. Different types are available, from handy hand-held measuring devices to stationary office solutions to inline spectrometers, in order to have a control take place directly during production," Ludwig explains. With this method, the masterbatch dosage is based on the base color, among otherv things. The method of operation is fast and simple, and the necessary investment is also manageable.

From injection molding and extrusion to transparent and fiber applications, almost all areas of plastics processing come into question.

Source:

GRAFE Advanced Polymers GmbH

Montalvo Attending Upcoming ICE Trade Show on October 19-21 (c) Montalvo
20.08.2021

Montalvo Attending Upcoming ICE Trade Show on October 19-21

Montalvo, an international specialists in web tension control, will be attending the upcoming ICE Trade Show in Orlando, Florida, on October 19-21, where Montalvo presents its latest products and web control solutions.

Visitors can get hands-on experience with a fully equipped and running machine featuring Montalvo’s industry-leading Load Cells, Controllers, Brakes, and more. At the show, visitors will also have the opportunity to see a full live demo line featuring Montalvo U4 Controller, M4 Tension Indicators, US4 Ultrasonic Sensor, and a V-Brake.

Montalvo, an international specialists in web tension control, will be attending the upcoming ICE Trade Show in Orlando, Florida, on October 19-21, where Montalvo presents its latest products and web control solutions.

Visitors can get hands-on experience with a fully equipped and running machine featuring Montalvo’s industry-leading Load Cells, Controllers, Brakes, and more. At the show, visitors will also have the opportunity to see a full live demo line featuring Montalvo U4 Controller, M4 Tension Indicators, US4 Ultrasonic Sensor, and a V-Brake.

Source:

Montalvo Corporation

(c) Brückner Trockentechnik GmbH & Co. KG
BRÜCKNER ECO-HEAT and ECO-AIR system on the stenter at FEINJERSEY
19.08.2021

Sustainable production technology from BRÜCKNER

  • Long-term partnership between the Austrian textile producer FEINJERSEY and the German textile machinery manufacturer BRÜCKNER

The Feinjersey Group is an internationally operating textile company and supplies the "global players" of the textile industry worldwide. The value chain of the company, which is based in Götzis, Austria, ranges from yarn processing to the finished product.

As a fully integrated production company, the internationally active textile company Feinjersey attaches great importance to a high quality standard and guarantees care at every step in the process chain. With approx. 250 employees and annual sales of around 45 million euros, the company knits, dyes and finishes top-quality knitted fabrics as well as elastic woven fabrics for a wide range of applications.

Products are made for the fashion, sports, workwear and technical textiles sectors. Among other things, fabrics for the automotive industry, laminating backings and coating substrate for artificial leather or foils, construction textiles or fabrics for medical technology are all produced.

  • Long-term partnership between the Austrian textile producer FEINJERSEY and the German textile machinery manufacturer BRÜCKNER

The Feinjersey Group is an internationally operating textile company and supplies the "global players" of the textile industry worldwide. The value chain of the company, which is based in Götzis, Austria, ranges from yarn processing to the finished product.

As a fully integrated production company, the internationally active textile company Feinjersey attaches great importance to a high quality standard and guarantees care at every step in the process chain. With approx. 250 employees and annual sales of around 45 million euros, the company knits, dyes and finishes top-quality knitted fabrics as well as elastic woven fabrics for a wide range of applications.

Products are made for the fashion, sports, workwear and technical textiles sectors. Among other things, fabrics for the automotive industry, laminating backings and coating substrate for artificial leather or foils, construction textiles or fabrics for medical technology are all produced.

The Austrian textile manufacturer has been certified with the Bluesign textile seal and ensures efficient use of resources with modern machinery. Water and energy consumption as well as pollutant emissions are to be reduced to a minimum.

In textile finishing in particular, the focus is on minimising energy consumption as this process is the most energy-intensive in the entire process chain. Feinjersey uses its own photovoltaic system for this purpose, as well as the heat recovery and exhaust air purification systems on the stenter frames. By using the waste heat from production, the company's buildings are heated. All six stenter frames at Feinjersey are made by BRÜCKNER and produce with three-stage heat recovery and exhaust air purification systems.

The latest BRÜCKNER line has a working width of 4.20 m and is mainly used for the finishing of high-ly elastic and extremely sensitive knitted fabric. In order to avoid yellowing on the fabric, the stenter is equipped with an indirect gas heating system. The knitting oil vapours coming from the fabric during the heat-setting process are extracted from the dryer and cleaned in a BRÜCK-NER ECO-AIR exhaust air cleaning system before being extracted to atmosphere. The complete exhaust air treat-ment on the newest stenter is carried out by a multistage BRÜCKNER ECO-HEAT and ECO-AIR system.

Source:

Brückner Trockentechnik GmbH & Co. KG

(c) lululemon
18.08.2021

Genomatica partners with lululemon bring bio-nylon to apparel

  • Renewably Sourced Materials to Help Replace Petrochemicals in Apparel for a Healthier Planet

lululemon athletica inc. (NASDAQ:LULU) announced a multi-year collaboration with sustainable materials leader Genomatica to bring renewably-sourced, bio-based materials into lululemon’s products. This represents lululemon’s first-ever equity investment in a sustainable materials company and Genomatica’s largest partnership within the retail industry. Together, the two companies will create a lower-impact, plant-based nylon to replace conventional nylon, which is the largest volume of synthetic material currently used to make lululemon products.

Genomatica uses biotechnology and fermentation to convert plant-based ingredients into widely used chemical building blocks, like those used to make nylon. These building blocks are converted to pellets and yarns, and the companies will be working closely with lululemon’s fabric supply chain to incorporate this material into future products. Through this collaboration, the companies seek to create positive change within the $22B global nylon market by building more sustainable supply chains.  

  • Renewably Sourced Materials to Help Replace Petrochemicals in Apparel for a Healthier Planet

lululemon athletica inc. (NASDAQ:LULU) announced a multi-year collaboration with sustainable materials leader Genomatica to bring renewably-sourced, bio-based materials into lululemon’s products. This represents lululemon’s first-ever equity investment in a sustainable materials company and Genomatica’s largest partnership within the retail industry. Together, the two companies will create a lower-impact, plant-based nylon to replace conventional nylon, which is the largest volume of synthetic material currently used to make lululemon products.

Genomatica uses biotechnology and fermentation to convert plant-based ingredients into widely used chemical building blocks, like those used to make nylon. These building blocks are converted to pellets and yarns, and the companies will be working closely with lululemon’s fabric supply chain to incorporate this material into future products. Through this collaboration, the companies seek to create positive change within the $22B global nylon market by building more sustainable supply chains.  

More information:
lululemon Genomatica bio-based nylon
Source:

Method Communications