From the Sector

Reset
193 results
Meltblown Vliesstoffanlagen von Oerlikon Nonwoven (c) Oerlikon Manmade fibers
Meltblown Vliesstoffanlagen von Oerlikon Nonwoven
02.04.2020

Oerlikon Nonwoven large-scale meltblown sold to Asia

a leading Asian large-scale manufacturer of manmade fibers and polymers has invested in a new Oerlikon Nonwoven meltblown system. The recently-signed contract comprises a 2-beam system for manufacturing filtration nonwovens – predominantly for medical products such as face masks – with a nominal capacity of up to 1,200 tons of nonwovens a year. The commercial production launch has been scheduled for the fourth quarter of 2020.

The 2-beam system has an operating width of 1.6 meters and is equipped with the new patented Oerlikon Nonwoven electro-charging unit. The Oerlikon Nonwoven meltblown technology is recognized by the market as being the technically most efficient method for producing highly-separating filter media made from manmade fibers, particularly in conjunction with electrostatic charging and with extremely low-pressure loss. Electro-charging the filter nonwovens allows the manufacture of sophisticated EPA- and HEPA-class filter media as well as media that comply with the requirements of N95-, FFP2- and FFP3-class respiratory masks.

a leading Asian large-scale manufacturer of manmade fibers and polymers has invested in a new Oerlikon Nonwoven meltblown system. The recently-signed contract comprises a 2-beam system for manufacturing filtration nonwovens – predominantly for medical products such as face masks – with a nominal capacity of up to 1,200 tons of nonwovens a year. The commercial production launch has been scheduled for the fourth quarter of 2020.

The 2-beam system has an operating width of 1.6 meters and is equipped with the new patented Oerlikon Nonwoven electro-charging unit. The Oerlikon Nonwoven meltblown technology is recognized by the market as being the technically most efficient method for producing highly-separating filter media made from manmade fibers, particularly in conjunction with electrostatic charging and with extremely low-pressure loss. Electro-charging the filter nonwovens allows the manufacture of sophisticated EPA- and HEPA-class filter media as well as media that comply with the requirements of N95-, FFP2- and FFP3-class respiratory masks.

The demand for filtration nonwovens for medical applications has risen tremendously across the globe since the outbreak of the Sars-CoV-2 (coronavirus) epidemic, presenting all manufacturers with huge challenges. A meltblown system will be commissioning at the site of a leading Western European nonwovens producers as early as the second quarter of 2020. This system will be deployed exclusively in the manufacture of nonwovens for respiratory masks.

Due to the current state of emergency with regards to the local supply of face masks, Oerlikon Nonwoven is currently using its own laboratory system to produce electrostatically-charged filter media which are being sent to local small businesses and companies for the manufacture of face masks. 

 

More information:
Oerlikon Nonwoven
Source:

Oerlikon Manmade fibers

Face Mask Production in Denim Expert Ltd (c) Denim Expert Ltd
Face Mask Production in Denim Expert Ltd
26.03.2020

Denim Expert Ltd are producing facing mask for safety issue

  • Bangladeshi supplier offers production capacity to produce face masks and PPE on a non-profit basis
  • Reaching out to global agencies to build partnerships to help tackle COVID-19 crisis
  • “Now is the time for our whole industry to stand together”

A leading Bangladeshi garment manufacturer is offering the manufacturing capacity of his world-class facility for the production of protective face masks and Personal Protective Equipment (PPE) on a non-profit basis to help tackle the COVID-19 global pandemic.

Denim Expert Limited Managing Director, Mostafiz Uddin, has reached out to the global community including brands & retailers, governments, embassies, donors, development agencies, global apparel associations and bodies in these unprecedented times.

Mr. Uddin is offering the capacity, skills and production expertise of his factory and wants to develop partnerships to meet much-needed short-term demand for masks and PPE in the battle against COVID-19.

  • Bangladeshi supplier offers production capacity to produce face masks and PPE on a non-profit basis
  • Reaching out to global agencies to build partnerships to help tackle COVID-19 crisis
  • “Now is the time for our whole industry to stand together”

A leading Bangladeshi garment manufacturer is offering the manufacturing capacity of his world-class facility for the production of protective face masks and Personal Protective Equipment (PPE) on a non-profit basis to help tackle the COVID-19 global pandemic.

Denim Expert Limited Managing Director, Mostafiz Uddin, has reached out to the global community including brands & retailers, governments, embassies, donors, development agencies, global apparel associations and bodies in these unprecedented times.

Mr. Uddin is offering the capacity, skills and production expertise of his factory and wants to develop partnerships to meet much-needed short-term demand for masks and PPE in the battle against COVID-19.

Those willing to partner with him and wishing to utilize his production capacity would only be asked to provide fabrics and raw materials as well as meeting workers’ wages.

More information:
Denim Expert Ltd.
Source:

Denim Expert Ltd

Logo Vivolo
Vivolo presents SS2021 Collection
23.03.2020

Vivolo presents its SS2021 collection

Labels and small accessories stand together for the company’s great passion for leather, featuring a mix of eclectic inspirations, complemented by a variety of solutions and with a new exclusive Green Book, with a very sustainable approach.

Labels and small accessories stand together for the company’s great passion for leather, featuring a mix of eclectic inspirations, complemented by a variety of solutions and with a new exclusive Green Book, with a very sustainable approach.

A creative selection of proposals enriched with a new line of completely green products defines the SS2021 collection by Vivolo. Sustainability is the running theme, thanks to the development of concepts that focus on the combination of zero-impact processing techniques and state-of-the-art materials, bringing to life RE Vivolo.
This special Green Book gathers a selection of products that provide a sustainable interpretation of the beauty of Vivolos work. The selection of specific raw materials defines five micro-areas in terms of options: leather (recycled, solvent-free and vegetable-tanned), eco-leather (solventfree and jacron), technical solutions (silicon and recycled post-industrial polyurethane), fabrics (organic cotton, recycled cotton, felt obtained from the recycling of post-consumer plastic materials) and the brand new plant-based options (Apple Skin, Piñatex® and Bananatex®). In parallel with this eco-line, the collection presents the evolution of more classical option.
The heritage style results in the selection of new designs, made thanks to an combination heat embossing and hand painting enhancing the quality of leather through the creation of miniature works of art. An additional highlight is the embroidery section.
Technical inspirations remain the most direct expression of the research by the inhouse R&D team. From the use of high-performance materials to the implementation of ideal processing techniques, the mood emphasizes the high-tech character of these options, through mirrored, reflective and  iridescent finishings along with a fluorescent color palette. Silicon and polyurethane make again in this season their appearance.

The collection comes to a close with the accessories – patches as well as  drawstrings, puller, buttons and cord stoppers, along with many others – conceived to become the added detail to embellish and enhance outerwear and knitwear. Once again, Vivolo proves its ability in  interpreting a style that transcends time, representative of the Made in Italy tradition along with an unparalleled approach to production.

More information:
Vivolo Leather
Source:

Vivolo

Sappi at FESPA Global Print Expo (c) Sappi Europe
Sappi at FESPA Global Print Expo
20.02.2020

Sappi at FESPA Global Print Expo

Captivating colours, optimum cost efficiency and a sustainable value chain: these are some of the typical features of Sappi’s Inkjet and Dye Sublimation Papers. The global manufacturer will showcase its diverse, high-quality product ranges at FESPA Madrid, in hall 3, stand D30.

  • Transjet Drive dye sublimation paper tailored to industrial printing machines with a glue-belt system
  • Scrolljet, a large inkjet paper, with impressively razor-sharp lines
  • Digitally printed corrugated board with Fusion Topliner for consumer goods packing and displays

Eye-catching posters, textiles with excellent prints and labels that stand out clearly, this is how brand owners, advertising companies and retailers draw attention to themselves and their products. The comprehensive range of Sappi’s Dye Sublimation Papers, Inkjet Papers and Silicone Base Papers form the perfect basis for impressive brand communication. Customers and potential customers can come and convince themselves at this year’s FESPA event in Madrid, which takes place from 24 to 27 March.

Captivating colours, optimum cost efficiency and a sustainable value chain: these are some of the typical features of Sappi’s Inkjet and Dye Sublimation Papers. The global manufacturer will showcase its diverse, high-quality product ranges at FESPA Madrid, in hall 3, stand D30.

  • Transjet Drive dye sublimation paper tailored to industrial printing machines with a glue-belt system
  • Scrolljet, a large inkjet paper, with impressively razor-sharp lines
  • Digitally printed corrugated board with Fusion Topliner for consumer goods packing and displays

Eye-catching posters, textiles with excellent prints and labels that stand out clearly, this is how brand owners, advertising companies and retailers draw attention to themselves and their products. The comprehensive range of Sappi’s Dye Sublimation Papers, Inkjet Papers and Silicone Base Papers form the perfect basis for impressive brand communication. Customers and potential customers can come and convince themselves at this year’s FESPA event in Madrid, which takes place from 24 to 27 March.

Paper with impressive sustainable qualities
At its large exhibition stand in the Digital Printing hall, Sappi will showcase its Transjet range, which represents highest quality and optimal cost efficiency, offering also environmental advantages, such as low ink consumption and low transfer times. Minimal shrinkage of high elastic textiles is one of the key features of the Sportsline tacky grades. The special Transjet Drive, its extremely smooth backside and fast ink drying on the printable side, allow more efficient production on high-speed printers with glue belt systems. Sappi stands for much more than just the highest paper quality. Professional support through a special team of technical application engineers, Digital Solutions assist customers from their initial product idea to final production ensuring impressive results.

Differentiation through precision and sharpness
With its range of Inkjet papers, Sappi will demonstrate its considerable expertise in large format digital printing in Madrid. At the heart of the exhibition presentation is Scrolljet, a multi-layered coated paper for a wide range of outdoor applications, such as city light and mega light scrolling systems. DT-Plot and Swiss Matt are the best choice for graphic drawings and poster printing due to their exceptional colour results and the high precision and sharpness of the print.

Everything from a single, innovative source
When it comes to making classic packaging, shelf-ready packaging and POS displays stand out from the rest, marketing managers, brand owners and designers can always count on Fusion Topliner with its high degree of whiteness. As the topliner reproduces colours brilliantly and can be processed excellently, products made with this clearly stand out and attract attention. The product range presented by the paper and paperboard specialist is topped off by Silicone Base Papers for self-adhesive applications such as car wrapping, outdoor advertising and office supplies. This makes Sappi a versatile, long-term partner on which customers can rely. Sappi’s paper and paperboard thus go far beyond FESPA 2020: “Where colour comes alive.”

More information:
Sappi Europe Fespa Global Expo
Source:

Sappi Europe

Sicomin Launches New Bio Systems at JEC World 2020. (c) Sicomin
Sicomin Launches New Bio Systems at JEC World 2020.
17.02.2020

Sicomin Launches New Bio Systems at JEC World 2020.

Sicomin continues to assert itself as the leading formulator and supplier of high-performance, bio-based epoxy resin systems with the launch of new bioresins at JEC World 2020, Hall 6, Booth 43. The group will unveil a variety of products that are each available in industrial quantities for series production within Automotive, Wind Energy and Civil Engineering.

Sicomin continues to assert itself as the leading formulator and supplier of high-performance, bio-based epoxy resin systems with the launch of new bioresins at JEC World 2020, Hall 6, Booth 43. The group will unveil a variety of products that are each available in industrial quantities for series production within Automotive, Wind Energy and Civil Engineering.

Bio Fire Retardant Epoxy Gelcoat for Wind Energy and Infrastructure
Sicomin will showcase SGi 128, an innovative intumescent epoxy gelcoat developed specifically for fire retardant coating applications for critical components found in the Wind Energy and Civil Engineering markets.
SGi 128 Gelcoat is produced with 38% of its carbon content derived from non-oil sources and is a halogen free gelcoat that provides outstanding fire protection for epoxy laminates and extremely low smoke toxicity. Available with both fast and slow hardeners, this easy to apply epoxy system forms a much tougher and waterproof part surface than traditional intumescent coatings. Sicomin’s SGi 128 is available in industrial volumes with short lead times and has been successfully tested to EN 13501 (EUROCLASS B-S1-d0) and ASTM E84 (Class A).

NEW Bio Resin for HP-RTM processing for Automotive
Sicomin’s new bio-resin specifically formulated for HP-RTM processing, SR GreenPoxy® 28, is the sixth product in Sicomin’s renowned GreenPoxy® range. SR GreenPoxy® 28 is a fast cycle, low toxicity, third generation bio-based formulation aimed specifically at the HP-RTM moulding processes used for both high performance Automotive structural parts and aesthetic carbon fibre components. The new formulation has been optimized for fast production cycle times and superior mechanical performance and is a more sustainable alternative to traditional resins providing exceptional performance and quality for high volume programmes.

GreenPoxy® InfuGreen 810 on display with the GREENBOATS Flax 27 Daysailer on the JEC Planets
With very low viscosity at room temperature, InfuGreen 810 has been formulated to support manufacturers seeking bio-based alternatives for producing parts using injection or infusion techniques. Produced with 38% plant-based carbon content, InfuGreen 810 holds the DNV GL certification, providing extra assurance of the product’s quality, efficiency and safety standards. This high-performance epoxy infusion system is demonstrated at JEC World through the display of the GREENBOATS Flax 27 daysailer on the JEC Planets.

More information:
JEC World Sicomin
Source:

100percentmarketing

Bremer Baumwollbörse, Bremer Rathaus (c) Bremen Cotton Exchange
Bremer Baumwollbörse, Bremer Rathaus
10.02.2020

International Cotton Conference Bremen 2020: keynotes

Focus on Sustainability and Climate Change

Passion for Cotton: The 35th International Cotton Conference Bremen starts on 25 March in the Hanseatic city’s historic Town Hall. But before subject-specific questions are discussed in depth in the individual sessions, the concise and inspiring keynotes by leading business experts from science and industry will draw attention to the current trends and challenges in the industry at the start of the conference. A large part of the presentations is shaped by the current discussion on environmental and sustainability issues and the resulting consequences for the global economy.

Climate Change and Sustainability

“Climate change - a storm in a teacup?” asks Kai Hughes, Executive Director of the International Cotton Advisory Committee, Washington D.C., USA, in a provocative speech. The aim of his presentation is to work out the challenges of climate change especially for agriculture and cotton production. This should form the basis for later discussion on concrete approaches and solutions within the cotton community.

Focus on Sustainability and Climate Change

Passion for Cotton: The 35th International Cotton Conference Bremen starts on 25 March in the Hanseatic city’s historic Town Hall. But before subject-specific questions are discussed in depth in the individual sessions, the concise and inspiring keynotes by leading business experts from science and industry will draw attention to the current trends and challenges in the industry at the start of the conference. A large part of the presentations is shaped by the current discussion on environmental and sustainability issues and the resulting consequences for the global economy.

Climate Change and Sustainability

“Climate change - a storm in a teacup?” asks Kai Hughes, Executive Director of the International Cotton Advisory Committee, Washington D.C., USA, in a provocative speech. The aim of his presentation is to work out the challenges of climate change especially for agriculture and cotton production. This should form the basis for later discussion on concrete approaches and solutions within the cotton community.

With his lecture “The HUGO BOSS sustainability programme ... and what our customer has to do with it” Andreas Streubig, Director of Global Sustainability at Hugo Boss AG, Metzingen, Germany, rolls up the textile value chain from a different angle, starting at the consumer level. As a representative of a premium brand for women's and men's clothing, Streubig discusses sustainability as a strategic element of the corporate strategy and provides information on how elements of the strategy are being implemented at Hugo Boss.

Rüdiger Senft, Head of Sustainability at Commerzbank, Frankfurt am Main, Germany, looks at the changing role of banks in financing the cotton market. In addition to a general introduction to the topic of sustainability and banking regulation, Senft's presentation deals with the financing of the cotton trade from a social and ecological point of view.
The opening session on 25 March is hosted by Bill Ballenden, founder and owner of Dragontree, Swindon, UK, an online auction platform for the cotton trade. As a former cotton manager for Louis Dreyfus in Europe and Asia, Bill Ballenden has many years of experience in the industry.

Cross-Cutting Issues: Digitalisation, Gender, Value Chains

The subsequent session in the conference programme with the headline “A Wider View” is devoted to currently defining trends and important cross-cutting issues in the industry. This goes far beyond classic cotton themes.

A lecture by Mark Messura, Senior Vice President, Global Supply Chain Marketing for Cotton Incorporated, Cary, North Carolina, deals with the role of cotton in an increasingly digitally controlled supply chain. Significant keywords here are faster delivery times, vertical integration, transparency and traceability.

The presentation by Roger Gilmartin, Managing Director of Tri-Blend Consulting, Charlotte, USA, entitled “The secret recipe for timely, cost-optimised and high-quality cotton clothing” promises exciting and enlightening insights. Tri-Blend Consulting conducts studies on the performance of different cotton varieties during the entire consumption process to the finished yarn and evaluates them from an economic point of view.

Amy Jackson, from the Better Cotton Initiative, London, UK, presents ICA Liverpool's “Women in Cotton” initiative. With this commitment, the initiative aims to increase the influence of women in the cotton industry and give them a stronger voice, for example by building networks in cooperation.

Navdeep Singh Sodhi, International Strategic Management Consultant at the Gherzi Textile Organisation, Switzerland, gives an insight into the current development of the value chain for cotton, textiles and clothing in Africa. Looking ahead to the coming decades, also in view of population growth, Africa is seen as having a high potential for building economic structures to improve income and prosperity.

Thomas Schneider, Professor at the University of Applied Sciences in Berlin and active in the field of production planning and control, textile materials and materials testing will host the session. A leading light in his field, Thomas Schneider has more than 30 years of experience in scientific and application-oriented research in the textile and fibre sector, including at the Fibre Institute Bremen e.V.

Source:

Bremer Baumwollbörse

The Oerlikon Nonwoven electro-charging unit (c) Oerlikon Nonwoven
The Oerlikon Nonwoven electro-charging unit
23.01.2020

Oerlikon Nonwoven showcases convincing meltblown and spunbond technology

The Oerlikon Nonwoven experts will be presenting efficient solutions and comprehensive technology know-how for challenging filtration tasks to an international trade audience at the FiltXPO 2020 in Chicago, USA (Stand # 420), taking place between February 26 and 28.

Meltblown technology is one of the most efficient methods for producing very fine and highly-separating filter media made from manmade fibers. New, unique and highly-sophisticated filter media are easy to manufacture thanks to Oerlikon Nonwoven’s optimized meltblown technology. This process is characterized by its constant melt pressure distribution and consistent dwell time across the entire width of the spinning beam, Furthermore, the novel guidance and distribution of the process air outside the coathanger distributor offered by the Oerlikon Nonwoven technology prevents so-called hotspots, which overall ensures particularly homogeneous nonwoven properties and basis weights even in the case of delicate raw materials.

The Oerlikon Nonwoven experts will be presenting efficient solutions and comprehensive technology know-how for challenging filtration tasks to an international trade audience at the FiltXPO 2020 in Chicago, USA (Stand # 420), taking place between February 26 and 28.

Meltblown technology is one of the most efficient methods for producing very fine and highly-separating filter media made from manmade fibers. New, unique and highly-sophisticated filter media are easy to manufacture thanks to Oerlikon Nonwoven’s optimized meltblown technology. This process is characterized by its constant melt pressure distribution and consistent dwell time across the entire width of the spinning beam, Furthermore, the novel guidance and distribution of the process air outside the coathanger distributor offered by the Oerlikon Nonwoven technology prevents so-called hotspots, which overall ensures particularly homogeneous nonwoven properties and basis weights even in the case of delicate raw materials.

The Oerlikon Nonwoven charging unit stands out against other concepts currently available on the market. Users can freely choose from a large number of variation possibilities and set the optimum charging method depending on the filter application, allowing the Oerlikon Nonwoven charging unit to also be used for the manufacture of EPA- and HEPA-class filter media.

The new forming section ensures improved nonwoven formation evenness across the entire width, even in the case of high spinning speeds, special polymers and polymer combinations. In addition to this, the newly-designed system also ensures that nonwovens only require minimal edge trimming at the end of the production process. The newly-developed mixedfiber technology enables the combining of various filament cross-sections and polymers, in order to set ideal filtering and pleating performances, for example.

 

More information:
Oerlikon Nonwoven Filtxpo
Source:

Oerlikon Nonwoven

 TOPIC OF THE SEASON: Responsible Future (c) Premium Exhibitions GmbH
Alina Hahn, Marie Sandmann, Maren Wiebus, Damien Winpenny, Marie-Luise Patzelt
21.11.2019

TOPIC OF THE SEASON: Responsible Future

Sustainability is part of SEEK’s internal make-up and has always been part of the team and community experience. Over 80 sustainable brands make up the brand portfolio, including players like Veja, Dedicated and Kings of Indigo. Experts will be sharing their experiences on this market-defining topic as well, with a host of live podcasts, talks and panel discussions, and will be shaping SEEK’s programme of content.
 
BIG PLAYER: the new SEEK Culture

 
SEEK is Europe’s most successful trade show for pop, street and sneaker culture. This is where the key players meet, where the looks of tomorrow are showcased, modelled and retold, where classics are celebrated, authenticity rules the roost and where icons take their positions alongside shooting stars. SEEK is essential participation for anyone looking to curate a modern, youthful and relevant range.

The shift from a niche event to a large trade show is now complete with a new logo and campaign design. SEEK has emerged from its transformation to reveal that its content and visual look are as relevant as ever!  

Sustainability is part of SEEK’s internal make-up and has always been part of the team and community experience. Over 80 sustainable brands make up the brand portfolio, including players like Veja, Dedicated and Kings of Indigo. Experts will be sharing their experiences on this market-defining topic as well, with a host of live podcasts, talks and panel discussions, and will be shaping SEEK’s programme of content.
 
BIG PLAYER: the new SEEK Culture

 
SEEK is Europe’s most successful trade show for pop, street and sneaker culture. This is where the key players meet, where the looks of tomorrow are showcased, modelled and retold, where classics are celebrated, authenticity rules the roost and where icons take their positions alongside shooting stars. SEEK is essential participation for anyone looking to curate a modern, youthful and relevant range.

The shift from a niche event to a large trade show is now complete with a new logo and campaign design. SEEK has emerged from its transformation to reveal that its content and visual look are as relevant as ever!  

Together with creative agencies Karl Anders and Haebmau, the SEEK team has been working for weeks on the brand’s new branding. The result: a visual concept with a strong message.

“The handshake is the right imagery and commitment to our stance and that of the SEEK community.”

“SEEK stands for strength and business just as much as for communality and good vibes! ‘Get Along’ articulates a feeling of agreement, of moving forward and getting to grips with things. We all want to shape a positive future for our industry – as partners and by joining forces.”, explains Fashion Director Maren Wiebus.

CREATIVE CONNECTION: Karl Anders and Haebmau
 
The Hamburg-based agency Karl Anders, which was established by Claudia Fischer-Appelt and Lars Kreyenhagen, was commissioned to come up with the creative concept and design language for the logo and campaign.

“With the new look we are entering a new era for SEEK as a brand. Lots of brands have chosen a design using Helvetica in recent years,” says Claudia Fischer-Appelt, Creative Director at Karl Anders. “We are now signalling a clear shift in another direction. Confident, bold and independent. With the logo we are inviting the viewer to play with the linear layout in their head; we are breaking viewing habits, making a statement and revving things up a gear. SEEK, there it is.”
 
The artwork is the result of a process of in-depth debate with the SEEK brand that took place over several weeks both within the team and also with the support of lifestyle agency Haebmau. Workshops, research and analyses ultimately led to a new, strong brand identity. SEEK is focussed on both established and new players and stands for the WE.

“I have known SEEK since it was in its infancy, so to me it was always like a little brother of the large, successful PREMIUM. Quirky and different, always interesting but somehow not quite so imposing,” says Markus Bublitz, Executive Creative Director at Haebmau. “SEEK today is more grown-up, confident and sharper. Thanks to its position in the market, which it has conquered over the years, it no longer needs to please everyone but can afford to be controversial. This can offer space for new, creative ideas.”

SEEK is edgy, clean-cut and unpolished.

We are all about statement design, new classics, denim and sportswear. SEEK is the trade show event for the fashion community. SEEK knows who calls the shots; it boosts sales and is the place for the next generation of decision-makers to get together. Unlike all the others, SEEK is unconventional and the antidote to boring.

Source:

Premium Exhibitions GmbH

(c) CHT-Gruppe
21.11.2019

BeSoEFFECTIVE communication concept of the CHT Group is honoured with the GWA Effie Award 2019

Since 2018 the CHT Group has broken new ground in communication with BeSoEFFECTIVE. Complex chemical interrelations are translated into simple and hardly technical words in combination with stylistically clear pictures.

The Best Solutions ”BeSo“ were specifically tailored to the communication with the target group of textile brands and retailers and do therefore not only appeal classic B2B clients but are also visible and comprehensible for end consumers of textile goods. The agency RTS Rieger Team from Leinfelden-Echterdingen that had already supported the new brand identity of the CHT Group in 2017 assisted CHT again in developing and creating the BeSoEFFECTIVE concept. One year after its publication, the communication concept has now achieved great success. BeSoEffective was honoured with the GWA Effie Award 2019 in bronze in Frankfurt am Main on 14th November.

Since 2018 the CHT Group has broken new ground in communication with BeSoEFFECTIVE. Complex chemical interrelations are translated into simple and hardly technical words in combination with stylistically clear pictures.

The Best Solutions ”BeSo“ were specifically tailored to the communication with the target group of textile brands and retailers and do therefore not only appeal classic B2B clients but are also visible and comprehensible for end consumers of textile goods. The agency RTS Rieger Team from Leinfelden-Echterdingen that had already supported the new brand identity of the CHT Group in 2017 assisted CHT again in developing and creating the BeSoEFFECTIVE concept. One year after its publication, the communication concept has now achieved great success. BeSoEffective was honoured with the GWA Effie Award 2019 in bronze in Frankfurt am Main on 14th November.

Since 1981 the Effie has been awarded for efficiency in marketing communication by the Gesamtverband Kommunikationsagenturen GWA (general association of communication agencies). It’s not exclusively the convincing look or content of campaigns that is honoured by the jury of experts with the GWA Effie Award but it’s rather the proven success and efficiency of such ideas and campaigns. By using the BeSoEFFECTIVE communication the CHT Group has so far increased the brands’ & retailers’ demand for innovative effects by about 30 %.

with CHT products are put in a nutshell by BeSoEFFECTIVE. The brand promise BeSo (”Best Solution“) is supplemented by an effect name deriving from the corresponding functionality – BeSoCOOL, BeSoFRESH or BeSoSMOOTH. Thus, each effect of the portfolio is given a uniform yet individual branding and a clear structure. The functionality of each effect is supplemented by pronounced and symbolic pictures which visually stress the benefits.

Eric Knehr, Head of Brand & Retail Service of the CHT Group states: “To us its of utmost importance to speak our target group’s language. Therefore, our BeSoEFFECTIVE campaign focuses on a clear communication with unique pictures and a uniform effect branding. Our customers’ positive reactions and this award prove, that our strong concept optimally supports our daily work as well as market and customer demands. However, it also puts the excellent performance of our innovative and sustainable effects into the right light."

More information:
CHT Gruppe Effi
Source:

CHT Germany GmbH

Bemberg™ presents the original material for modern living © GB Network
20.11.2019

Bemberg™ presents the original material for modern living

  • Première Vision New York - 21st to 22nd of January 2020.

Bemberg™ is pleased to present a full range of new fabric innovations at Première Vision New York. Made by Asahi Kasei, the company is the sole maker of this one-of-a-kind, matchless, high-tech natural material, with a unique and precious touch and feel.

During this edition of Première Vision New York attendees will discover a full range of new fabric innovations from international partners.

Bemberg™ proposal will especially focus on Velutine Evo for shell fabrics, the new technically advanced finishing refinement technology developed in the Japanese laboratories of Asahi Kasei that offers a premium finish to the best qualities of the classic Bemberg™ peach skin touch. As part of the company’s continuous innovation, Velutine Evo brings better environmental, energy and water profiles for the benefit of Bemberg™ partners in the manufacture of their ranges. It sets a new benchmark for everyday luxury with a new generation of fibrillation technology.

The unique circularity of Bemberg™

  • Première Vision New York - 21st to 22nd of January 2020.

Bemberg™ is pleased to present a full range of new fabric innovations at Première Vision New York. Made by Asahi Kasei, the company is the sole maker of this one-of-a-kind, matchless, high-tech natural material, with a unique and precious touch and feel.

During this edition of Première Vision New York attendees will discover a full range of new fabric innovations from international partners.

Bemberg™ proposal will especially focus on Velutine Evo for shell fabrics, the new technically advanced finishing refinement technology developed in the Japanese laboratories of Asahi Kasei that offers a premium finish to the best qualities of the classic Bemberg™ peach skin touch. As part of the company’s continuous innovation, Velutine Evo brings better environmental, energy and water profiles for the benefit of Bemberg™ partners in the manufacture of their ranges. It sets a new benchmark for everyday luxury with a new generation of fibrillation technology.

The unique circularity of Bemberg™

Bemberg™ is made from a cotton linter bio-utility material, a natural derived source, and a truly unique one in the smart fiber arena that doesn’t deplete forestry resources. And apart from the exquisite and precious touch of Bemberg™ fabrics, visitors will see the unique circularity of Bemberg™ from its source, manufacture and end-of-life credentials, supported by the LCA study, signed by ICEA and validated by Paolo Masoni, confirming a new quality profile and standard with a more responsible and unique position today. Full GRS certification, Oeko-Tex 100, ISO 14001, & Eco-Mark. Bemberg™ also has a new Compostability Certification.

The Innovhub-SSI report confirms Bemberg™ filaments disintegrate at 100% value Twithin the limits specified by the UNI EN 13432, point A.3.1 for disintegration in composting. Also, a new Ecotoxicity metric to EN 13432:2000 Annex E, the compost obtained from the Bemberg™ filaments according to ISO 16929:2013 revealed no ecotoxicity effect.  The Bemberg™ filaments tested for heavy metals and other toxic hazardous substances and was found to comply with tests specified by the UNI EN 13432, for the substances listed in table A.1.

(c) closed
Gilberto Calzolari
14.11.2019

Premium Brands choosing Responsible Innovation for the Wardrobe of Tomorrow

C.L.A.S.S. discloses five key and influencing brands with unique outfits already available in the market, that demonstrate how smart materials are able to deliver eco hi-tech valuable innovations. 

Five, completely different, contemporary lifestyles!

C.L.A.S.S. discloses five key and influencing brands with unique outfits already available in the market, that demonstrate how smart materials are able to deliver eco hi-tech valuable innovations. 

Five, completely different, contemporary lifestyles!

Among the first adopters of E.C.O. Kosmos shines Gilberto Calzolari, a luxury prêt-à-porter brand Made in Italy with a responsible soul, whose style is represented by the demi-couture dress: fresh, glamorous and romantic. Precious fabrics, complemented by the highest quality in production techniques and tailoring craftsmanship, bear the hallmarks of a brand with a strong identity that is in tune with the needs of contemporary living and reclaims the values of environmental sustainability as well as elegance and excellence typical of luxury Made in Italy. Supported by the CNMI Fashion Trust due to its environmental committment and unique design, the brand chose two materials of the E.C.O. KOSMOS cross-collection for the SS 2020 presented during MFW: the E.C.O. AURORA 50% AMNI SOUL ECO® -50% Standard 100 by OEKO-TEX® certified Cotton canvas and the E.C.O. SONICA Newlife™ stretch satin.

Closed: the German brand, founded in1978, focuses on great designs, small details and pure quality to create understated and advanced denim looks totally handmade in Italy. Closed selected the new amazing Candiani ReLast line, the range of market fresh responsible denim products whose objective is to introduce a 100% transformed innovative solution. The partnership between ROICA™ and Candiani generated a very special ROICA™ yarn realized only for Candiani. A premium stretch yarn that is boasting a GRS (Global Recycled Standard) version 4 certification, thanks to its high percentage of recycled content and appropriated process of transformation.

Within the premium brand adoptions of Bemberg™ shines Martin Greenfield, one of the world's most renowned tailor company. The company, founded in 1977 by Martin Greenfield, realizes hand tailored men’s clothing to meet the requirements of innovative designers, specialty retailers, costume designers, stylists and individuals. For finest made-to-order as well as made-to-measure suits,100% built by hand in their Brooklyn Factory, they choose Bemberg™ Yarn Dyed Lining produced in Italy and Japan for its soft versatility, unique precious touch and exquisite comfort.

My.Suit: Since My.Suit was founded in 2008 in NYC, their philosophy has been simple: provide their clients with a better way to buy a suit.  Their made-to-measure suits and tuxedos offer a better fit than traditional off-the-rack alternatives by accommodating as many different body types as possible, and can be made in a variety of fabric and style options to suit individual needs.  My.Suit utilizes a vertical business model: fabric mill, suit manufacturing, and retail locations, to provide a quick delivery time at an attractive price point. My.Suit has been using Bemberg™ lining to add style and comfort to their suit jackets for over a decade.  With a wide range of colors and designs, Bemberg lining complements their extensive fabric selection and helps us to create visually stunning suits that feel great and provides a personalized option to their clients.

un-sanctioned™ is an innovation-driven performance running apparel brand newly launched in September, 2019; founded on the belief that it’s time for running to give back to the environment all runners take so much joy from.  In partnership with Miti-Spa, un-sanctioned™ has developed and launched with two initial sustainable performance running fabrics called [ BottleKnit™ ] — a 100% recycled polyester made from plastic bottles. And [ WasteKnit™] — a 100% upcycled polyamide made from industrial waste blended with ROICA™ EF yarn for uncompromising smart stretch performance.

More information:
Fashion Mode CLASS
Source:

© 2019 GB Network Marketing & Communication

When innovation meets passion: Canclini 1925 weaves Italian excellence through quality, style and service. (c) Canclini
18.09.2019

When innovation meets passion: Canclini 1925 weaves Italian excellence through quality, style and service.

Artisan craft, experience and high eco-technological specialization: the great tradition of fabrics for shirts which styles the future.

Search for quality, the ability to interpret elegance and a product inspired by tradition, though always trendy: these are the distinctive traits which define the vocation of Canclini 1925, a point of reference worldwide for shirt fabric manufacturing. This expertise is implemented through dynamic creativity and 100% Made in Italy artisan  craft. These are the foundations which make the history and capability of Canclini 1925 unique, as standard bearer for everlasting style.

All this results from an authentic family tradition which, for three generations, has been the driving force of the company, shaping each collection. This passion is at the service of tireless search in terms of style and technology which underlies the whole Canclini 1925 innovative approach. The goal is to offer, through its fabrics, an inimitable experience, “creating wellbeing” and emotion through touch alone, respecting the environment and humans.

Artisan craft, experience and high eco-technological specialization: the great tradition of fabrics for shirts which styles the future.

Search for quality, the ability to interpret elegance and a product inspired by tradition, though always trendy: these are the distinctive traits which define the vocation of Canclini 1925, a point of reference worldwide for shirt fabric manufacturing. This expertise is implemented through dynamic creativity and 100% Made in Italy artisan  craft. These are the foundations which make the history and capability of Canclini 1925 unique, as standard bearer for everlasting style.

All this results from an authentic family tradition which, for three generations, has been the driving force of the company, shaping each collection. This passion is at the service of tireless search in terms of style and technology which underlies the whole Canclini 1925 innovative approach. The goal is to offer, through its fabrics, an inimitable experience, “creating wellbeing” and emotion through touch alone, respecting the environment and humans.

Founded in 1925, Canclini has always been a company able to combine extraordinary creativity and product care, established as a silk factory in the Como region. This tradition was renewed in the 1960s with the shift to the cotton sector, aiming more and more at customer service, developing a partnership and trust relation. Working with Canclini 1925 means reaching into the tradition of a family which has always been passionate about its work, dynamic, creative and focused on continuous innovation.

These are distinctive and qualifying elements in the Canclini 1925 approach. An approach which, in line with the research and development pathway on which the company has always invested substantial resources, also involves considerable attention the topic of environmental and social accountability. This commitment is confirmed by numerous and prestigious certifications in the company portfolio, starting from the careful selection of raw materials to its social commitment. More specifically, Canclini 1925 has been awarded the GOTS (Global Organic Textile Standard), SUPIMA COTTON (the Pima “Gossypium Barbadense” cotton, classified as Extra-long Staple) certifications, following the Standard 100 by OECO-TEX®, BCI (Better Cotton Initiative) and GRS (Global Recycle Standard). A comprehensive range of tools which, combined with its in-house know-how and expertise capital, enhances the portfolio of Canclini 1925 branded innovations.

This accountability approach also encompasses the social area with the association “Un sorriso in più” (“One extra smile”). Founded and managed by the company, it is a non-profit organisation engaged in projects which include assistance in nursing homes to elderly persons without family ties, as well as in the support to children living difficult and disadvantaged family situations, focusing its activity on “human life quality”. The uniqueness generated by this meeting between tradition and innovation is the driving force behind corporate research, as well as the truly distinctive reason for its style and technology development. The high-performance looms and technologies used make the company strong and flexible enough for contemporary market requirements. The trademark passion of the Canclini family completes the picture within which the company operates, true to an approach which is at the same time artisan and high-tech, a point of reference in Italy and worldwide.

Thanks to its substantial manufacturing capacity, Canclini today is present on all of the most influential shirt markets worldwide, and – with its new Blue 1925 line - also in the denim world. In this way the company has succeeded in positioning itself among major players in textile manufacturing, authentically Italian because of its farsighted  business vision, care for details and production flexibility. It is the approach which – over the years - has allowed the group to take over important enterprises in the sector, for example Hausmann-Moos and Profilo Tessile, Maglificio Mida and Grandi & Rubinelli.
According to Simone Canclini, CEO of Canclini 1925: “What characterises the Canclini 1925 spirit is first and foremost genuine passion driven by our inspiring principles: quality, style and service. These elements have allowed us to become and remain a point of reference worldwide, to rediscover the everyday – basic and exciting – emotion of choosing a special shirt”.

(c) PFAFF Industriesysteme und Maschinen GmbH
23.08.2019

PFAFF INDUSTRIAL on FILTECH fair 2019 in Cologne

Production units with latest joining technologies for the filtration industry

The core competence of PFAFF Industriesysteme und Maschinen GmbH is the joining of flexible materials. The company not only masters industrial sewing applications, but has also been an innovation leader in textile welding applications for decades. Depending on the material and customer requirements, customer solutions are implemented using the ULTRASONIC, HOT-AIR or HOT WEDGE welding methods. In addition to the classical industries such as 'clothing, shoes, home and car upholstery', the company has made a name for itself as a specialist supplier of production solutions for the filter industry. Whether it be filters for dry filtration (dust removal, air conditioning and ventilation technology) or for liquid filtration, such as pleating filters, tube filters, stocking filters, pocket filters, bag filters, etc., the articles must first be assembled. In close dialogue with the customer, PFAFF defines the right joining technology and implements this in the machine or production line.

Production units with latest joining technologies for the filtration industry

The core competence of PFAFF Industriesysteme und Maschinen GmbH is the joining of flexible materials. The company not only masters industrial sewing applications, but has also been an innovation leader in textile welding applications for decades. Depending on the material and customer requirements, customer solutions are implemented using the ULTRASONIC, HOT-AIR or HOT WEDGE welding methods. In addition to the classical industries such as 'clothing, shoes, home and car upholstery', the company has made a name for itself as a specialist supplier of production solutions for the filter industry. Whether it be filters for dry filtration (dust removal, air conditioning and ventilation technology) or for liquid filtration, such as pleating filters, tube filters, stocking filters, pocket filters, bag filters, etc., the articles must first be assembled. In close dialogue with the customer, PFAFF defines the right joining technology and implements this in the machine or production line.

With the brands PFAFF INDUSTRIAL and KSL, the company has the necessary experience in process engineering, electrical engineering, automation technology and robotics to meet customer requirements for reliable, partly fully automatic solutions. A fully automatic production line for the manufacture of filter bags (with longitudinal seams) for an Asian customer is currently being manufactured in Kaiserslautern/Germany. At the heart of the system are the exchangeable hot-wedge welding and 3-thread chainstitch sewing units. Depending on the application, these can be implemented in the manufacturing process in just a few minutes. The raw material is unrolled, precisely formed and quickly and reliably fed to the sewing or welding unit. After joining, the 'tubes' are cut (filter length selectable via display) and automatically ejected. Optionally, the parts can be labelled using a printer. Depending on the material, the plant reaches a production speed of 10m/min.

More information:
Pfaff Industrial
Source:

PFAFF Industriesysteme und Maschinen GmbH

Archroma: New Formaldehyde-Free* Low Temperature Curing Binder © Archroma
Screen capture of Archroma’s video on Archroma's Cool Print system based on the new Helizarin® LTC New, a formaldehyde-free* low temperature curing liquid binder for pigment printing on all kinds of fibers.
22.07.2019

Archroma: New Formaldehyde-Free* Low Temperature Curing Binder

  • For Soft Vibrant And Durable Pigment Prints

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals towards sustainable solutions, has recently launched at the ITMA exhibition its new Helizarin® LTC New liq, a formaldehyde-free* low temperature curing binder for pigment printing on all kinds of fibers.

Prints are increasingly popular in apparel and interior textiles, as they allow us to express ourselves through vibrant colors and patterns. Consumers are especially drawn to the soft touch of an elegantly printed fabric.

Creating soft and vibrant prints can however be challenging for textile manufacturers: Pigment printing is usually applied to the fabric with a binder that often contains formaldehyde, needs a high temperature for curing, and can make the fabric harsh to the touch.

That is why Archroma developed its new Helizarin® LTC New to allow textile manufacturers to address these challenges.

  • For Soft Vibrant And Durable Pigment Prints

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals towards sustainable solutions, has recently launched at the ITMA exhibition its new Helizarin® LTC New liq, a formaldehyde-free* low temperature curing binder for pigment printing on all kinds of fibers.

Prints are increasingly popular in apparel and interior textiles, as they allow us to express ourselves through vibrant colors and patterns. Consumers are especially drawn to the soft touch of an elegantly printed fabric.

Creating soft and vibrant prints can however be challenging for textile manufacturers: Pigment printing is usually applied to the fabric with a binder that often contains formaldehyde, needs a high temperature for curing, and can make the fabric harsh to the touch.

That is why Archroma developed its new Helizarin® LTC New to allow textile manufacturers to address these challenges.

The innovation was developed in compliance with “The Archroma Way: safe, efficient, enhanced, it’s our nature”. The approach finds its origin in Archroma’s deep belief that it is possible to make the textile industry sustainable, economically and ecologically.

Helizarin® LTC New is a binder designed for low temperature curing or no curing. This allows to reduce the fixation temperature and time compared to conventional pigment printing processes. In addition, manufacturers will not experience the change of shades that sometimes occur with high temperature processes.

When using Helizarin® LTC New, textile manufacturers can therefore improve the productivity of their printing process and reduce their energy consumption.

Helizarin® LTC New is also a welcome solution for textile manufacturers who do not have curing equipment, since it offers similar to better fastness than commodity binders that have been treated through a full process, and excellent fastness on synthetic fibers such as polyester and polyamide.

When it comes to the final result on the fabric, Helizarin® LTC New allows the creation of soft and durable prints for premium quality articles.

The new product will be the core of Archroma's Cool Print, a complete formaldehyde-free* system that keeps printed textiles soft and durable, and the planet cooler.

The system, which combines Helizarin® LTC New with Luprintol® softening and fixing auxiliaries and Printofix® pigment preparations, allows manufacturers to realize potential savings of up to 30% in processing time, 45% in energy consumption and 44% CO2 emissions – compared to benchmark pigment printing.

Helizarin® LTC New, as well as the Cool Print system, is formaldehyde free* and registered under REACH. It can be used in line with the ZDHC & bluesign® requirements, is compliant with the Oeko-Tex Std 100 Class 1 standard for baby wear, and with the MRSL of the most major brands.

“Helizarin® LTC New was developed by Archroma’s R&D team together with experts at our Global Competence Center for Printing, based in Barcelona, Spain”, says Joaquin Femat, Head of Business Development for Printing, Brand & Performance Textile Specialties, at Archroma. “As The Archroma Way is based on Safe, Efficient and Enhanced as its three pillars, we designed an innovation that offers our customers a balanced combination of resource optimization, safe handling, and controlled effluent. Because it’s our nature!”
 

More information:
Archroma Helizarin Farben
Source:

EMG

(c) HEXCEL
27.06.2019

HEXCEL ANNOUNCES OFFICIAL OPENING OF FAHCCT LABORATORY IN SHANGHAI

Hexcel, Progen and Future Aerospace today celebrated the official opening of their new joint venture laboratory and materials testing facility in Shanghai, China.

Future Aerospace Hexcel Commercial Composite Testing Limited (FAHCCT) will provide China with a world-class aerospace standard materials testing laboratory that provides technical services including support with materials qualification for commercial aircraft programs. Planned activities at the site will include mechanical and chemical testing of composite laminate specimens (including fatigue performance), material qualifications, and provision of support for customer supply chains in China.

Hexcel, Progen and Future Aerospace today celebrated the official opening of their new joint venture laboratory and materials testing facility in Shanghai, China.

Future Aerospace Hexcel Commercial Composite Testing Limited (FAHCCT) will provide China with a world-class aerospace standard materials testing laboratory that provides technical services including support with materials qualification for commercial aircraft programs. Planned activities at the site will include mechanical and chemical testing of composite laminate specimens (including fatigue performance), material qualifications, and provision of support for customer supply chains in China.

More information:
Hexcel
Source:

AGENCE APOCOPE

15.05.2019

Industry veteran, Chris Govier joins Kornit Digital as Managing Director, Europe

Govier plans to scale the organization and take customer focus to the next level to drive growth
Kornit Digital, (NASDAQ: KRNT), a global market leader in digital textile printing technology, announced today that Chris Govier has been named Managing Director at Kornit Digital Europe GmbH.

Govier is a proven leader who brings broad experience of supporting customers with industrial digital transformation, a proven record of driving growth, and solid experience building and managing world class teams. In his new role, Govier will oversee Kornit Digital’s operations in Europe, the Middle East and Africa (EMEA) and will be instrumental in scaling up Kornit’s business.

Govier previously served in sales and general management roles at Xerox Corporation, and holds a BA from the University of Wellington, New Zealand.

Govier plans to scale the organization and take customer focus to the next level to drive growth
Kornit Digital, (NASDAQ: KRNT), a global market leader in digital textile printing technology, announced today that Chris Govier has been named Managing Director at Kornit Digital Europe GmbH.

Govier is a proven leader who brings broad experience of supporting customers with industrial digital transformation, a proven record of driving growth, and solid experience building and managing world class teams. In his new role, Govier will oversee Kornit Digital’s operations in Europe, the Middle East and Africa (EMEA) and will be instrumental in scaling up Kornit’s business.

Govier previously served in sales and general management roles at Xerox Corporation, and holds a BA from the University of Wellington, New Zealand.

Commenting on the appointment, Gilad Yron, Kornit Digital’s Executive Vice President of Global Business, said, “I welcome Chris on board as the new Managing Director of Kornit Digital Europe. He brings with him solid experience in the analog-digital transition in industrial print and deep regional understanding. Europe has traditionally been a strong performer for Kornit, and Chris’ expertise will help us grow the organization to the next level.”

“This is an incredibly exciting time to join Kornit Digital – their technology, coupled with a passion and drive will significantly disrupt the textile printing industry.” said Chris Govier. “EMEA represents a huge opportunity and I look forward to building on the fantastic success achieved so far.”

Source:

Kornit Digital Europe GmbH

18.04.2019

Kornit Digital Unveils the Kornit Presto System, a Solution for Digital Direct-to-Fabric Printing

The innovative technology addresses the growing need for on-demand textile design and production

Kornit Digital, a global market leader in digital textile printing innovation, has announced the introduction of the new Kornit Presto, the only industrial single-step solution for direct-to-fabric printing. The Kornit Presto solution eliminates the need for pre and post treatment of fabric and allows for high-quality printing on a broad variety of fabric types and applications. The Kornit Presto does not consume water in the printing process, making it a environmentally friendly solution.

The new Kornit Presto comes with the NeoPigment Robusto, a Pigment-based ink. Implemented into the Kornit NeoPigmentTM process, the Robusto provides above industry standard wash and rub results and exceptional color fastness across a wide fabric and application range. The Robusto enjoys faster physical and chemical bonding characteristics, enabling a significantly shorter curing time, while providing quality and a wide color gamut.

The innovative technology addresses the growing need for on-demand textile design and production

Kornit Digital, a global market leader in digital textile printing innovation, has announced the introduction of the new Kornit Presto, the only industrial single-step solution for direct-to-fabric printing. The Kornit Presto solution eliminates the need for pre and post treatment of fabric and allows for high-quality printing on a broad variety of fabric types and applications. The Kornit Presto does not consume water in the printing process, making it a environmentally friendly solution.

The new Kornit Presto comes with the NeoPigment Robusto, a Pigment-based ink. Implemented into the Kornit NeoPigmentTM process, the Robusto provides above industry standard wash and rub results and exceptional color fastness across a wide fabric and application range. The Robusto enjoys faster physical and chemical bonding characteristics, enabling a significantly shorter curing time, while providing quality and a wide color gamut.

The Kornit Presto solution suits a wide range of business and application needs in a variety of industry segments, including fast growing segments within the on-demand fashion and home décor markets. It is a highly productive solution, available in multiple configurations and able to print 450 square meters per hour.

Gart Davis, CEO at Spoonflower, the world’s first web-based service for custom, on-demand fabric and design creation and a long-time Kornit customer, commented, “We were thrilled to be able to test the new system and found the Presto to be in a class by itself; it prints beautifully on all kinds of fabrics, in a single-step, with an environmentally friendly dry process, and now at a multiple of productivity.  Our partnership with Kornit continues to be fundamental to our mission to make custom fabric accessible to designers, creative individuals and small businesses all over the world. We can’t wait to get going.”

 

More information:
Kornit Digital Direct
Source:

Kornit Digital Ltd.

(c) GARMON CHEMICALS
10.04.2019

Garmon launches white&green line at the Amsterdam Kingpins Show.

Garmon Chemicals confirms itself as a pioneer in chemistry specifically applied to garment treatment, at the forefront in terms of product research and active promotion on the sustainable issue. The Dutch show is the ideal stage to present a preview of the latest innovation born out of Garmon’s volcanic R&D department. It is Avol Lime, the revolutionary and ecologicallyadvanced neutralizing agent. Used in combination with Avol Oxy White (the bleaching agent that represents the safe alternative to potassium permanganate), it allows to obtain a fully safe and sustainable bleaching process.

white&green: solutions for eco-bleaching
white&green is the ultimate solution to obtain a safe and sustainable jeans discoloration process. The new line provides two avant-garde solutions: two highly performant products, both representing a safe and conscious alternative.
Two souls presenting unique characteristics:

The “white” soul

Garmon Chemicals confirms itself as a pioneer in chemistry specifically applied to garment treatment, at the forefront in terms of product research and active promotion on the sustainable issue. The Dutch show is the ideal stage to present a preview of the latest innovation born out of Garmon’s volcanic R&D department. It is Avol Lime, the revolutionary and ecologicallyadvanced neutralizing agent. Used in combination with Avol Oxy White (the bleaching agent that represents the safe alternative to potassium permanganate), it allows to obtain a fully safe and sustainable bleaching process.

white&green: solutions for eco-bleaching
white&green is the ultimate solution to obtain a safe and sustainable jeans discoloration process. The new line provides two avant-garde solutions: two highly performant products, both representing a safe and conscious alternative.
Two souls presenting unique characteristics:

The “white” soul

  • the hightest level of whiteness
  • superior bright shades
  • stylish vintage looks
  • extraordinary contrasts

The “green” soul

  • safe alternative to dangerous products
  • significant energy savings
  • classified in ZDHC gateway (from level 1)
  • greenofchange® approved
More information:
Garmon Chemicals
Source:

GARMON CHEMICALS

02.04.2019

Kornit Digital Reinvents Industrial Polyester Printing

  • New game-changing Kornit NeoPoly Technology with industry-first innovation for industrial polyester printing that prevents dye migration.
  • New Kornit Avalanche Poly Pro system unveiled at events during April, commercially available immediately.

Kornit Digital Ltd. (NASDAQ: KRNT), a global market leader in digital textile printing innovation, unveiled the game-changing Kornit NeoPoly Technology, which is the industry’s first digital, industrial process for high-quality printing on polyester.

Polyester is the second largest category in the overall T-shirt market, it is key in the sport segment, and is growing in the athleisure and functional apparel segments. Currently polyester is printed predominantly by analog solutions, which creates major technological, cost and sustainability challenges.  

The new ground-breaking Kornit NeoPoly Technology addresses these challenges with a new process and ink set implemented in the renowned Kornit NeoPigmentTM process. Kornit’s new process handles polyester applications without compromising on design, run size, substrate or labor.

  • New game-changing Kornit NeoPoly Technology with industry-first innovation for industrial polyester printing that prevents dye migration.
  • New Kornit Avalanche Poly Pro system unveiled at events during April, commercially available immediately.

Kornit Digital Ltd. (NASDAQ: KRNT), a global market leader in digital textile printing innovation, unveiled the game-changing Kornit NeoPoly Technology, which is the industry’s first digital, industrial process for high-quality printing on polyester.

Polyester is the second largest category in the overall T-shirt market, it is key in the sport segment, and is growing in the athleisure and functional apparel segments. Currently polyester is printed predominantly by analog solutions, which creates major technological, cost and sustainability challenges.  

The new ground-breaking Kornit NeoPoly Technology addresses these challenges with a new process and ink set implemented in the renowned Kornit NeoPigmentTM process. Kornit’s new process handles polyester applications without compromising on design, run size, substrate or labor.

The breakthrough technological innovation is achieved by an innovative ink set and a physical and chemical process specifically developed for low temperature curing, and polyester enhancing functionalities developed to maintain fabric characteristics and provide superior fastness. This unique process prevents dye migration on polyester.  The inks are Oeko-Tex and Eco-Passport certified and do not contain PVCs or other toxic ingredients.

The first system equipped with the Kornit NeoPoly Technology is the new Kornit Avalanche Poly Pro, a member of Kornit’s world-class reliable, highly productive industrial platform. The single-step Poly Pro is the perfect system for the industry, enabling easy and cost effective short-runs and on-demand printing on polyester garments.

More information:
Kornit Digital
Source:

Kornit Digital Ltd.

12.03.2019

JEC WORLD 2019: 3 winners of the Startup Booster competition

JEC WORLD 2019 is turning Paris into the composites capital of the world.

As well as dozens of conferences, composites circles and live demos, plus hundreds of other events, the first day of the show was marked by the announcement of the three winners of the largest international startup competition in the composites field!

In the last three years, 270 projects have been picked out from over 30 countries, with 30 finalists and a total of nine winners.

THREE WINNERS
Ten finalists selected from 120 entries pitched to an international jury. The pitch session opened with an inspiring speech by Enrico Palermo, President of The Spaceship Company. He introduced the next generation of reusable space vehicles and their impact on costs, safety and the environment during the launch into space.
The programme incited enthusiasm from Peter Hopwood, founder of Hopwood Communications, who encouraged the finalists to develop their stage presence and galvanise their pitches.

At the afternoon’s award ceremony, three competitors were selected for the following prizes:

JEC WORLD 2019 is turning Paris into the composites capital of the world.

As well as dozens of conferences, composites circles and live demos, plus hundreds of other events, the first day of the show was marked by the announcement of the three winners of the largest international startup competition in the composites field!

In the last three years, 270 projects have been picked out from over 30 countries, with 30 finalists and a total of nine winners.

THREE WINNERS
Ten finalists selected from 120 entries pitched to an international jury. The pitch session opened with an inspiring speech by Enrico Palermo, President of The Spaceship Company. He introduced the next generation of reusable space vehicles and their impact on costs, safety and the environment during the launch into space.
The programme incited enthusiasm from Peter Hopwood, founder of Hopwood Communications, who encouraged the finalists to develop their stage presence and galvanise their pitches.

At the afternoon’s award ceremony, three competitors were selected for the following prizes:

AIRGO DESIGN (Singapore)
World's first full composite economy class passenger seat developer.
www.airgodesign.com

AREVO (USA)
Delivering the future of composite manufacturing today through breakthrough advancements in software, materials, and robotics. Through enabling the 3D printing of large, mass-produced parts and structures, AREVO is revolutionizing mainstream manufacturing and the global supply chain.
www.arevo.com

WOODOO (France)
Augmented wood.
https://woodoo.fr

The public vote: LAVOISIER COMPOSITES (France)
New generation of material entirely sourced from the French aerospace transformation sector.
www.lavoisier-composites.com

More information:
JEC World
Source:

Apocope Agency