From the Sector

Reset
 Radici: Mehr Nachhaltigkeit auf der Piste (c) RadiciGroup
Die RadiciGroup und DKB präsentieren den ersten „zirkulären“ Skianzug
01.12.2021

Radici: The sustainability our mountains deserve

  • RadiciGroup and DKB introduce the first “circular” ski suit
  • A garment made of yarn obtained from recycled materials and designed with end-of-life recyclability in mind, without compromising style, design and technical performance.
  • RadiciGroup Ski Club athletes will be the first ambassadors of this sustainability project

The first truly sustainable ski suit, featuring Italian style and design and a zero-kilometre supply chain, is finally here. Two Bergamo companies of excellence played the leading roles in the conception and realization of this highly innovative fashion-sport garment: RadiciGroup, a world leading producer of chemical intermediates, polyamide polymers, high-performance engineering polymers and advanced textile solutions, and DKB, a company specializing in technical sportswear with the same brand name.

  • RadiciGroup and DKB introduce the first “circular” ski suit
  • A garment made of yarn obtained from recycled materials and designed with end-of-life recyclability in mind, without compromising style, design and technical performance.
  • RadiciGroup Ski Club athletes will be the first ambassadors of this sustainability project

The first truly sustainable ski suit, featuring Italian style and design and a zero-kilometre supply chain, is finally here. Two Bergamo companies of excellence played the leading roles in the conception and realization of this highly innovative fashion-sport garment: RadiciGroup, a world leading producer of chemical intermediates, polyamide polymers, high-performance engineering polymers and advanced textile solutions, and DKB, a company specializing in technical sportswear with the same brand name.

The ski suit, consisting of jacket and trousers, is fashioned with a fabric made of RENYCLE, a RadiciGroup yarn obtained from mechanically recycled polyamide (nylon), which affords notable savings in energy and water consumption, as well as lower CO2 emissions. In addition, the suit’s padding and numerous accessories, such as zippers, Velcro, buttons and thread, are also made of polyamide.

This achievement was made possible by the great teamwork of RadiciGroup and DKB on the research and development of chemically compatible materials that can be used in special applications requiring high technical performance. The end result is an almost mono-material garment that significantly facilitates end-of-life recycling. It can be more easily converted into polymers for use in the manufacture of ski boot components and bindings, in addition to applications in the automotive and furnishing industries, or in any other sector requiring the characteristics of high performance polyamides.

The ski suit by RadiciGroup is thus an all-round application of ecodesign and circular economy principles to fashion and garment making, which justifies the claim “Una sostenibilità all’altezza delle nostre montagne” [Sustainability worthy of our mountains] written in a logo patch on the inside of the jacket.

“I am particularly proud of this achievement, a synthesis of my passion and effort,” said Angelo Radici, president of RadiciGroup. “I’ve always loved mountaineering and skiing, and, together with my collaborators, I work hard at our company day in and day out to find innovative solutions that improve the sustainability of our industry. This ski suit is concrete proof of the fact that textiles and apparel can be made sustainable without compromising on comfort, design, looks or performance. I will never get tired of repeating that collaboration among the firms along the production chain is crucial to manufacturing goods with an ecodesign approach, considering their end-of-life recyclability and, thus, potentially giving them unlimited durability. Upstream producers, like us, gladly share our know-how in materials chemistry and experience in recycling with our downstream partners, so that, together, we can find sustainable and viable solutions in the various sectors where we operate.”

Source:

RadiciGroup

RGE Gives Sustainable Fashion a Boost with New Partnerships in Singapore (c) RGE Group
From Left to Right: Tey Wei Lin, President of RGE, Sim Ann, Senior Minister of State for Foreign Affairs and National Development, Low Yen Ling, Minister of State for Trade & Industry and Culture, Community and Youth, and Wilson Teo, President of TaFF after signing of strategic partnership between TaFF and RGE to advocate sustainable industry practices within Singapore and the region, through programme implementation, research, and education
01.12.2021

RGE Gives Sustainable Fashion a Boost

  • RGE has formalised two new partnerships in Singapore to advance sustainable fashion.

The first is a three-year strategic partnership with the Textile & Fashion Federation (TaFF) to advocate sustainable industry practices within Singapore and the region, through programme implementation, research, and education. The second is a five-year research collaboration with Nanyang Technological University, Singapore (NTU Singapore) on innovation in textile recycling technology.

The partnership with TaFF on its fashion sustainability programme was officially launched today. Through industry talent development and capacity building, raising corporate and consumer awareness, and innovation promotion, TaFF seeks to galvanise the fashion ecosystem towards redefining sustainable fashion.

  • RGE has formalised two new partnerships in Singapore to advance sustainable fashion.

The first is a three-year strategic partnership with the Textile & Fashion Federation (TaFF) to advocate sustainable industry practices within Singapore and the region, through programme implementation, research, and education. The second is a five-year research collaboration with Nanyang Technological University, Singapore (NTU Singapore) on innovation in textile recycling technology.

The partnership with TaFF on its fashion sustainability programme was officially launched today. Through industry talent development and capacity building, raising corporate and consumer awareness, and innovation promotion, TaFF seeks to galvanise the fashion ecosystem towards redefining sustainable fashion.

Wilson Teo, President of TaFF, said, “Our strategic partnership with RGE marks a step forward for TaFF to expand our sustainability ecosystem throughout the fashion value chain, from materials, manufacturing, brands and technology to solutions. We have set up a Steering Committee that spans across the value chain, as a model for the industry. Together with our collaborators, we will continue to equip enterprises in the journey of sustainability. We will also work with communities to build awareness in responsible consumption and recycling.”

RGE has committed to provide nearly S$3 million funding over three years to support TaFF’s fashion sustainability programme. In addition, RGE’s Vice Chairman Bey Soo Khiang joins the programme’s Steering Committee as its Vice Chairperson.

Tey Wei Lin, President of RGE, said, “As a Singapore-based company and the world’s largest viscose producer, our business is well-positioned to support the country’s desire to advance sustainable development and to create a green economy. Our collaboration with TaFF and NTU is an investment of financial and other resources to create meaningful impact, not just within Singapore but also in the region. As part of our US$200 million investment commitment into next-generation textile fibre innovation and technology, we seek to work with innovators, industry partners, research institutions and academia to scale up solutions that will deliver cleaner and more circular cellulosic textile fibre to the masses at affordable prices.”

The launch of TaFF’s fashion sustainability programme follows the roll-out of the Enterprise Sustainability Programme (ESP) by Enterprise Singapore on 1 October 2021, which supports enterprises in their sustainability initiatives and helps them capture new opportunities in the green economy.

“Industry partnerships are pertinent to uplift capabilities of enterprises. We are very encouraged by TaFF’s efforts to drive sustainability in the textile and fashion sector as trade associations and chambers play a key role in strengthening sector-specific capabilities,” said Alan Yeo, Director of Retail & Design at Enterprise Singapore. “Collaborations with corporate partners such as RGE will also help accelerate this process. This is a good start and we hope to eventually see more companies across all sectors start to integrate sustainability alongside their growth.”

The launch event was graced by Minister of State for Trade and Industry Low Yen Ling, TaFF’s patron and Senior Minister of State for National Development and Foreign Affairs Sim Ann, CEO of Enterprise Singapore Png Cheong Boon, as well senior representatives from TaFF and RGE.

The official launch of the research collaboration with NTU is expected to take place next year. A key desired outcome from the collaboration is to complement RGE’s pilot urban-fit textile recycling plant in Singapore.

30.11.2021

Lenzing Managing Board proposes dividend of EUR 4.35

The Managing Board of Lenzing AG, a leading manufacturer of specialty fibers made from the renewable raw material wood, has resolved to propose to the Annual General Meeting a dividend of EUR 4.35 for the 2021 financial year. This dividend proposal reflects the suspended dividends from 2019 and 2020.

The total dividend payout to shareholders will amount to about EUR 115,492,500, subject to the acceptance of the proposal by the Supervisory Board at its meeting scheduled for March 09, 2022 for the purpose of approving the consolidated financial statements as well as the approval granted by Lenzing AG shareholders at the Annual General Meeting on April 26, 2022.

The Annual Report of the Lenzing AG for the 2021 financial year will be published on March 10, 2022.

The Managing Board of Lenzing AG, a leading manufacturer of specialty fibers made from the renewable raw material wood, has resolved to propose to the Annual General Meeting a dividend of EUR 4.35 for the 2021 financial year. This dividend proposal reflects the suspended dividends from 2019 and 2020.

The total dividend payout to shareholders will amount to about EUR 115,492,500, subject to the acceptance of the proposal by the Supervisory Board at its meeting scheduled for March 09, 2022 for the purpose of approving the consolidated financial statements as well as the approval granted by Lenzing AG shareholders at the Annual General Meeting on April 26, 2022.

The Annual Report of the Lenzing AG for the 2021 financial year will be published on March 10, 2022.

More information:
Lenzing AG dividend
Source:

Lenzing AG

30.11.2021

Koketa is including US-made Acteev® in leggings and undergarments

Koketa, a brand of premium womenswear based in Peru, has begun sampling leggings, undergarments and workout wear featuring Acteev® Protect fabric. Produced by U.S. manufacturer Ascend Performance Materials, Acteev incorporates the odor-fighting and mildew-destroying antimicrobial benefits of zinc ions embedded into the matrix of superior nylon yarns and fabrics.

“When it comes to what’s closest to your most vulnerable skin, being safe and sanitary is a top priority,” said Juan Daniel Del Carpio, commercial director for Koketa. “The Koketa woman wants beauty, comfort and protection, and a partnership with Acteev makes it easier than ever for us to deliver all three.”

Koketa garments with Acteev feature Koketa’s signature innovative styles, including unique knit patterns, on-trend colors and flattering silhouettes. The Acteev fabric is buttery-soft and breathable yet long-lasting and resistant to pilling.

Koketa, a brand of premium womenswear based in Peru, has begun sampling leggings, undergarments and workout wear featuring Acteev® Protect fabric. Produced by U.S. manufacturer Ascend Performance Materials, Acteev incorporates the odor-fighting and mildew-destroying antimicrobial benefits of zinc ions embedded into the matrix of superior nylon yarns and fabrics.

“When it comes to what’s closest to your most vulnerable skin, being safe and sanitary is a top priority,” said Juan Daniel Del Carpio, commercial director for Koketa. “The Koketa woman wants beauty, comfort and protection, and a partnership with Acteev makes it easier than ever for us to deliver all three.”

Koketa garments with Acteev feature Koketa’s signature innovative styles, including unique knit patterns, on-trend colors and flattering silhouettes. The Acteev fabric is buttery-soft and breathable yet long-lasting and resistant to pilling.

Additionally, clothing made with Acteev is resistant to unwanted odors, keeping garments as fresh after 100 washes as they are on day one. The active ingredient – labeled safe by the U.S. Food and Drug Administration – targets the bacteria and microbes that can cause odor, mildew and discoloration.

“Zinc is nature’s safeguard,” said Juan Toro, global principal business development leader for Acteev in the Americas. “It is a mineral needed for human health, and we have harnessed its power to protect the garments in a natural, sustainable way.”

Source:

Ascend Performance Materials / EMG

(c) Huntsman Corporation
30.11.2021

Huntsman presents High-Performance Solutions and Protection Effects at Performance Days

Huntsman Textile Effects is bringing its complete end-to-end suite of high-performance solutions for sports apparel to Performance Days Digital Fair from December 1 to 2, 2021 virtually.

Driven by growing consumer interest in active and healthy lifestyles, coupled with the growing number of national sports participation programs that promote healthy living, the global sportwear market shows no signs of slowing. Brands that aim to satisfy this high-growth market need to be able to produce performance apparel that not only delivers sought-after functional capabilities and desirable aesthetics, but also comes with low environmental impact.

Huntsman will introduce the latest addition to the third generation of its revolutionary AVITERA® SE polyreactive dye range at Performance Days. AVITERA® ROSE SE delivers bluish-red shades while reducing the water and energy required for production by up to 50% and increasing mill output by up to 25% or more. It also significantly outperforms available dyeing technologies for cellulosic fibers and blends in terms of value, reducing recipe costs, minimizing processing costs and eliminating reprocessing.

Huntsman Textile Effects is bringing its complete end-to-end suite of high-performance solutions for sports apparel to Performance Days Digital Fair from December 1 to 2, 2021 virtually.

Driven by growing consumer interest in active and healthy lifestyles, coupled with the growing number of national sports participation programs that promote healthy living, the global sportwear market shows no signs of slowing. Brands that aim to satisfy this high-growth market need to be able to produce performance apparel that not only delivers sought-after functional capabilities and desirable aesthetics, but also comes with low environmental impact.

Huntsman will introduce the latest addition to the third generation of its revolutionary AVITERA® SE polyreactive dye range at Performance Days. AVITERA® ROSE SE delivers bluish-red shades while reducing the water and energy required for production by up to 50% and increasing mill output by up to 25% or more. It also significantly outperforms available dyeing technologies for cellulosic fibers and blends in terms of value, reducing recipe costs, minimizing processing costs and eliminating reprocessing.

Also in the spotlight are eco-friendly solutions for the challenges of achieving full whites and consistent shades on recycled polyester (rPET) with right-first-time quality. Huntsman’s rPET processing solutions include pre-treatment chemicals, fluorescent whitening agents, state-of-the-art washfast dyes, and finishing solutions for high-performance protection and comfort.

In partnership with Sciessent, Huntsman is also bringing revolutionary antimicrobial and odor-control solutions to Performance Days. These include Sciessent’s Agion Active® X2, a next-generation odor-control solution that combines advanced technologies to both capture and fight odor-causing bacteria for garments that smell fresh for longer and need less frequent washing. The partners are also previewing a new solution: Sciessent’s NOBO™, a cost-effective odor adsorber that provides odor control on virtually any fabric.

Other featured innovations include Teflon Eco Dry with Zelan™ R2 Plus technology. A breakthrough in sustainable water repellency, it contains 30% renewably sourced plant-based raw materials and meets or exceeds performance levels possible with traditional fluorinated technologies. Another exciting Huntsman solution is the new PHOBOL® Extender UXN – a product that optimizes water-repellent finishes for long-lasting fabric protection. It is free from butanone oxime, which has recently been re-classified in Europe and restricted above certain limits in products by bluesign®.

Source:

Huntsman Corporation

(c) Huntsman Corporation
29.11.2021

Huntsman’s AVITERA® SE Rose delivers Sustainability and Performance

Huntsman Textile Effects has released the latest addition to the third generation of its revolutionary AVITERA® SE polyreactive dye range with the introduction of AVITERA® ROSE SE for brilliant bluish-red shades. The innovative new dye significantly outperforms the available dyeing technologies for cellulosic fibers and blends, delivering substantial water and energy savings, exceptional overall fastness, and reduced costs.

AVITERA® ROSE SE slashes the water and energy required for production by up to 50% thanks to its unique low-temperature and high-speed wash-off technology. It further delivers excellent right-first-time performance, with outstanding compatibility, levelling properties, and on-tone build-up. The cost-effective formulation reduces recipe costs for medium-dark shades while both minimizing processing costs and eliminating reprocessing. It also increases mill output by up to 25% or more.

Huntsman Textile Effects has released the latest addition to the third generation of its revolutionary AVITERA® SE polyreactive dye range with the introduction of AVITERA® ROSE SE for brilliant bluish-red shades. The innovative new dye significantly outperforms the available dyeing technologies for cellulosic fibers and blends, delivering substantial water and energy savings, exceptional overall fastness, and reduced costs.

AVITERA® ROSE SE slashes the water and energy required for production by up to 50% thanks to its unique low-temperature and high-speed wash-off technology. It further delivers excellent right-first-time performance, with outstanding compatibility, levelling properties, and on-tone build-up. The cost-effective formulation reduces recipe costs for medium-dark shades while both minimizing processing costs and eliminating reprocessing. It also increases mill output by up to 25% or more.

Using AVITERA® ROSE SE, brands can stand out with brilliant bluish-red textile products in a broader shade gamut. The dyes offer very good light fastness levels for classic bluish trichromatic element, with exceptional overall fastness performance. Products dyed with AVITERA® ROSE SE have the highest chlorine resistance, tailormade for stringent Japanese and US laundering requirements, and are suitable for use with Huntsman’s HIGH IQ® Lasting Color Eco color-retention program. With minimal chance of cross-staining, they are ideal for red-white striped cotton knit fabric.

AVITERA® ROSE SE is fully compliant with the most stringent industry and brand-specific restricted substance lists. It is bluesign® approved and is suitable for STANDARD 100 by OEKO-TEX® certified textile products.

Launched by Huntsman Textile Effects in 2010, the first-generation AVITERA® SE dyes set the benchmark for sustainability in the textile industry. The second generation expanded the range’s color palette from the palest to the deepest and darkest shades. The third generation further enhances the economic sustainability of the AVITERA® range while delivering unrivalled environmental benefits, outstanding operational performance, and attractive textiles with exceptional overall fastness.

TBWA\Helsinki: Finnish webstore replaced its products with friends to the lonely (c) TBWA\Helsinki
26.11.2021

TBWA\Helsinki: Finnish webstore replaced its products with friends to the lonely

Black Friday is known as the world's largest shopping event, which is constantly growing in size. Rather than offering highly promoted sales, a Finnish clothing company Pure Waste joined forces with HelsinkiMissio, an NGO battling loneliness in Finland. On Black Friday, instead of buying clothes anyone can donate a friend to people suffering from loneliness.

A Global survey shows that over a third of adults experience feelings of loneliness worldwide. Many who feel lonely try to cope by shopping, which in fact has been proven to aggravate loneliness and can even cause feelings of depression.1

This is why HelsinkiMissio, a Finnish NGO battling loneliness, and Pure Waste, a Finnish clothing manufacturer, joined forces on Black Friday. All Pure Waste’s products on their webstore have been replaced with a chance to donate for HelsinkiMissio’s important work against loneliness.

Black Friday is known as the world's largest shopping event, which is constantly growing in size. Rather than offering highly promoted sales, a Finnish clothing company Pure Waste joined forces with HelsinkiMissio, an NGO battling loneliness in Finland. On Black Friday, instead of buying clothes anyone can donate a friend to people suffering from loneliness.

A Global survey shows that over a third of adults experience feelings of loneliness worldwide. Many who feel lonely try to cope by shopping, which in fact has been proven to aggravate loneliness and can even cause feelings of depression.1

This is why HelsinkiMissio, a Finnish NGO battling loneliness, and Pure Waste, a Finnish clothing manufacturer, joined forces on Black Friday. All Pure Waste’s products on their webstore have been replaced with a chance to donate for HelsinkiMissio’s important work against loneliness.

“Black Friday is known as the biggest commercial event, but for lonely people it can actually be the darkest day of the year. This is why we wanted to shed light on this issue precisely today. We hope that together with Pure Waste we’re able to raise awareness on the issue and furthermore help lonely people”, says Tuula Colliander, Executive Director from HelsinkiMissio.

Black Friday stunt is executed together with Pure Waste, a Finland-based clothing manufacturer that has never taken part to Black Friday due to their values. The company, also known as a pioneer in textile recycling, makes its clothing from 100% recycled cotton, utilizing cutting waste from the textile industry.


1 Pieters, Rik: Bidirectional Dynamics of Materialism and Loneliness: Not Just a Vicious Cycle. Journal of Consumer Research Volume 40, Issue 4, 1 December 2013, Pages 615–631.

Source:

TBWA\Helsinki

Indorama Ventures launches the industry's first report on contributions to UN Sustainable Development Goals (c) Indorama Ventures Public Company Limited
SDGs Report Cover
24.11.2021

Indorama Ventures launches the industry's first report on contributions to UN Sustainable Development Goals

Indorama Ventures Public Company Limited (IVL), a world-class sustainable chemical company, introduced the first independent Sustainable Development Goals (SDGs) Report developed by the private sector in Thailand. The report provides details of the company’s sustainability strategy, aligned with the United Nation’s SDGs.

Renaud Meyer, UN Development Programme (UNDP) Resident Representative to Thailand, said, “We support countries in achieving the UN Sustainable Development Goals through integrated solutions. Achieving the goals at global level requires the partnership of governments, private sector, civil society and citizens alike to make sure we leave a better planet for future generations. The Sustainable Development Goals Report developed by the private sector is one way to urge more constructive collaboration among sectors.”  

Indorama Ventures Public Company Limited (IVL), a world-class sustainable chemical company, introduced the first independent Sustainable Development Goals (SDGs) Report developed by the private sector in Thailand. The report provides details of the company’s sustainability strategy, aligned with the United Nation’s SDGs.

Renaud Meyer, UN Development Programme (UNDP) Resident Representative to Thailand, said, “We support countries in achieving the UN Sustainable Development Goals through integrated solutions. Achieving the goals at global level requires the partnership of governments, private sector, civil society and citizens alike to make sure we leave a better planet for future generations. The Sustainable Development Goals Report developed by the private sector is one way to urge more constructive collaboration among sectors.”  

The report presents IVL’s progress in achieving the UN Sustainable Development Goals. The company outlined five focus areas for contributing to the SDGs: Recycling and the Circular Economy, Climate Change and Energy, Environmental Stewardship, Health Safety and Well-being, and CSR and Collaborations. IVL believes it can have the greatest impact on these areas while also growing its business and bringing about constructive change. Activities in these five areas help IVL align with 13 of the 17 SDGs, totaling 39 targets.

Yash Lohia, Chief Sustainability Officer at Indorama Ventures, said, “Businesses can make a significant contribution to achieving the UN Sustainable Development Goals. IVL, as a responsible industry leader, is committed to contributing to the SDGs and addressing the world's environmental and economic concerns. We need to be accountable to our stakeholders, including our 25,000 employees and their families, our customers and industry partners. Furthermore, we believe that complying with the SDGs will provide us with considerable business prospects.

Marchi & Fildi Group presents the selection of metalloplastic yarns with GRS certification of its Gleaming line, coming from 100% post-consumer recycled polyester (c) Marchi & Fildi Group
Linea Gleaming
24.11.2021

Italian spinning group launches new metalloplastic yarns

  • Marchi & Fildi Group presents the selection of metalloplastic yarns with GRS certification of its Gleaming line, coming from 100% post-consumer recycled polyester

With the goal to expand the offer of yarns coming from recycled raw materials for a textile more attentive to the consumption of resources, the MFT division of the Marchi & Fildi Group completes the range of metalloplastic yarns of its Gleaming collection with the insertion of 100% recycled polyester yarns coming from post-consumer material and with the GRS (Global Recycle Standard) certification.
Starting from recycled polyester with traceable origin, in compliance with environmental and social criteria extended to all the phases of the supply chain, metalloplastic yarns are obtained with the same esthetic features and performance, compared to similar products based on virgin raw materials.

  • Marchi & Fildi Group presents the selection of metalloplastic yarns with GRS certification of its Gleaming line, coming from 100% post-consumer recycled polyester

With the goal to expand the offer of yarns coming from recycled raw materials for a textile more attentive to the consumption of resources, the MFT division of the Marchi & Fildi Group completes the range of metalloplastic yarns of its Gleaming collection with the insertion of 100% recycled polyester yarns coming from post-consumer material and with the GRS (Global Recycle Standard) certification.
Starting from recycled polyester with traceable origin, in compliance with environmental and social criteria extended to all the phases of the supply chain, metalloplastic yarns are obtained with the same esthetic features and performance, compared to similar products based on virgin raw materials.

“Thanks to our commitment in the research of materials, we are able to propose metalloplastic yarns produced with 100% recycled material; the film used for the production of flat yarns, too, is in recycled polyester, with a quality level that is suitable for cutting – the Company explains -. Till now it was possible to find in the market only metalloplastic yarns with not recycled polyester flat yarn, twisted with certified fibers. This represents an important step forward to implement a circular economy possibility for this kind of products too”.

The Gleaming yarns GRS certified can be supplied in gold and silver, colors and transparent, in various counts, widths and types; they are suitable for use in flat and circular knitting, weaving, hosiery and as a component in fancy yarns.

The Gleaming line, with a wide selection of yarns in stock service, represents a completion of the offer of the Marchi & Fildi Group. The Gleaming yarns are offered in different thicknesses, widths and types with both metallized and transparent, iridescent, refracting and phosphorescent effects. The collection also includes items with special features of resistance to chemical and dyeing treatments. The Gleaming metalloplastic yarns find application in the world of fashion and furniture, for creative and fancy yarns and fabrics, accessories and decorations. Products with refractive features are also used in technical items like uniforms and workwear, sport garments and accessories, external ribbons and labels.

Source:

Marchi & Fildi Group

ISKO champions circularity and biodiversity at the Circular Fashion Summit 2021 (c) ISKO
Denim by ISKO
24.11.2021

ISKO champions circularity and biodiversity at the Circular Fashion Summit 2021

  • The leading denim ingredient brand joins lablaco’s virtual reality Circular Fashion Summit 2021 as an Innovation Partner

ISKO continues to reaffirm its commitment towards circularity by participating as an Innovation Partner in the Circular Fashion Summit 2021 by lablaco. The summit will bring together leaders of change across design, technology and sustainability to share knowledge and take action towards creating a circular future for fashion. The event will be held in a VR version of the Grand Palais Éphémère in Paris and will take place on 9-12 December.

ISKO’s approach to circularity is built on creating a future where no virgin resources are needed to produce beautiful durable and high performing woven fabrics To achieve this, the leading denim ingredient brand is working to remove its reliance on fossil fuels and virgin materials by employing only renewable energy and by setting the challenging target of using 100% recycled or reused materials.

  • The leading denim ingredient brand joins lablaco’s virtual reality Circular Fashion Summit 2021 as an Innovation Partner

ISKO continues to reaffirm its commitment towards circularity by participating as an Innovation Partner in the Circular Fashion Summit 2021 by lablaco. The summit will bring together leaders of change across design, technology and sustainability to share knowledge and take action towards creating a circular future for fashion. The event will be held in a VR version of the Grand Palais Éphémère in Paris and will take place on 9-12 December.

ISKO’s approach to circularity is built on creating a future where no virgin resources are needed to produce beautiful durable and high performing woven fabrics To achieve this, the leading denim ingredient brand is working to remove its reliance on fossil fuels and virgin materials by employing only renewable energy and by setting the challenging target of using 100% recycled or reused materials.

This impressive goal is possible thanks to the cutting edge technologies ISKO is working with such as a one of a kind process which fully separates and recycles cotton and polyester blends at scale, and collaborative partnerships with MoRe Research that are aimed at discovering new possibilities for cellulose based materials. ISKO’s new generation of R TWO™50+ fabrics are also playing a role in moving towards this goal. E ngineered for nature’ they use a minimum of 50% pre and post consumer recycled blend reducing carbon and water footprints by 45% and 65% respectively, and are all GRS certified ISKO also believes that the transition to a circular economy cannot happen without addressing the impact on biodiversity and our ecology. Tackling the over-sourcing of raw materials is key, as the extraction of new natural resources and the impact on carbon emissions in processing them contributes to more than 90% of biodiversity loss.

Source:

Menabò Group

22.11.2021

Sappi invests in Kirkniemi Mill on decarbonisation journey

Sappi has approved an investment in Kirkniemi Mill in Lohja, Finland which enables a switch in its energy sourcing to renewable bioenergy. With this investment the mill’s direct fossil greenhouse gas emissions will reduce by ca. 90 percent, which is equivalent to 230 000 tons of carbon dioxide annually.

The project, set for completion in early 2023, will contribute significantly to Sappi Europe’s decarbonisation roadmap by exiting coal at one of its last facilities partially using this fuel type. Biomass will then be used in Kirkniemi’s multi-fuel boiler, built in 2015. The move advances Sappi towards its 2025 targets which include reducing specific greenhouse gas emissions (scope 1 and 2) by 25 percent and increasing renewable energy share to 50 percent in Europe compared to 2019.

The investment will establish the equipment needed to receive, store and handle woody biomass like the bark, sawdust and wood chips used for biofuel production. Such biomass types are by-products from the forest-based industry and utilising them for energy production derives further value from the forest resource.

Sappi has approved an investment in Kirkniemi Mill in Lohja, Finland which enables a switch in its energy sourcing to renewable bioenergy. With this investment the mill’s direct fossil greenhouse gas emissions will reduce by ca. 90 percent, which is equivalent to 230 000 tons of carbon dioxide annually.

The project, set for completion in early 2023, will contribute significantly to Sappi Europe’s decarbonisation roadmap by exiting coal at one of its last facilities partially using this fuel type. Biomass will then be used in Kirkniemi’s multi-fuel boiler, built in 2015. The move advances Sappi towards its 2025 targets which include reducing specific greenhouse gas emissions (scope 1 and 2) by 25 percent and increasing renewable energy share to 50 percent in Europe compared to 2019.

The investment will establish the equipment needed to receive, store and handle woody biomass like the bark, sawdust and wood chips used for biofuel production. Such biomass types are by-products from the forest-based industry and utilising them for energy production derives further value from the forest resource.

In addition to increasing share of renewable energy, Sappi’s mills are also focused on reducing energy consumption. Sappi Kirkniemi Mill is party to Finland’s National Energy Efficiency Agreement and consistently reaches their energy saving targets. Kirkniemi’s ISO 50001 certification provides further evidence of the mill’s systematic improvement in energy efficiency.

Source:

Sappi Europe

(c) ANDRITZ
ANDRITZ Laroche textile recycling line
22.11.2021

ANDRITZ at Techtextil India 2021

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

Textil-recycling Technologies
Recently, ANDRITZ acquired Laroche SAS, a leading supplier of fiber processing technologies such as opening, blending, dosing, airlay web forming, textile waste recycling, and decortication of bast fibers. The product portfolio further complements and increases the ANDRITZ Nonwoven product range. One focus of this product range lies on complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end uses.

Needlepunch Technologies
Driven by the dynamic market for durable nonwovens, ANDRITZ has developed an elliptical pre-cylinder tacker – the PA3000. With this modern machine, ANDRITZ is responding to customer demands for higher capacities and lighter products. The PA3000 is an optimized cylinder pre-needleloom, which offers greater speeds and widths and has been specially developed for lighter webs. There is no friction between the web and the rolls, and there are no issues with the visual appearance.

ANDRITZ is also focusing on its latest needling technology for producing veloured felts, mainly for applications in the automotive industry.

In addition, ANDRITZ will be presenting the next generation of its batt-forming technology, the ProWin system. ProWin is a further development of ProDynTM and ProWidTM, which have achieved a high level of acceptance on the market with around 200 systems installed. This technology improves the current weight-profiling options and increases the actual production capacity.

Production of Bio-Wipes
For many years now, ANDRITZ has offered different nonwoven processes, such as spunlace and Wetlace, with one goal in mind: reduction and elimination of plastic raw materials while maintaining the high quality of the desired product properties. The latest development in this field is the ANDRITZ neXline wetlace CP line. This is a fully engineered production line, combining the benefits of wetlaid and drylaid technologies to produce a new generation of biodegradable wipes. This process achieves high performance entirely with plastic-free raw materials. The added benefit of using a blend of fibers, like wood pulp, short-cut cellulosic fibers, viscose, cotton, hemp, bamboo, or linen, without chemical additives, results in a 100% sustainable fabric.

22.11.2021

ECOSENSOR™ by Asahi Kasei Advance launches its FW 22/23 fabric collection

For its FW 22/23 collection, ECOSENSOR™ by Asahi Kasei Advance presents a high-tech fabric collection, which implements a new generation of values, with the aim of keeping nature, body and mind in harmony.

ECOSENSOR™’s new references meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Furthermore, they are made with certified ingredients, through a completely traceable and transparent production process and supply chain. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™’ stands out as a unique eco-high-tech performance proposition in its market.

The whole collection is focused on advanced technology and environmental responsibility. Thanks to ECOSENSOR™ by Asahi Kasei Advance’s unique value-chain based on recycling technology, most part of its yarns are certified by the renowned GRS (Global Recycled Standard). Even the dyeing and finishing phases - key moments for  performance wear - have been certified by international labels such as bluesign® and OEKO-TEX® Standard 100.

For its FW 22/23 collection, ECOSENSOR™ by Asahi Kasei Advance presents a high-tech fabric collection, which implements a new generation of values, with the aim of keeping nature, body and mind in harmony.

ECOSENSOR™’s new references meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Furthermore, they are made with certified ingredients, through a completely traceable and transparent production process and supply chain. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™’ stands out as a unique eco-high-tech performance proposition in its market.

The whole collection is focused on advanced technology and environmental responsibility. Thanks to ECOSENSOR™ by Asahi Kasei Advance’s unique value-chain based on recycling technology, most part of its yarns are certified by the renowned GRS (Global Recycled Standard). Even the dyeing and finishing phases - key moments for  performance wear - have been certified by international labels such as bluesign® and OEKO-TEX® Standard 100.

Among the compositions of the fabrics, dominant are the recycled polyamide (58%) and polyester (39%) yarns. The stretch component present in 22 articles of the collection is based on ROICA™ EF by Asahi Kasei - the sustainable recycled stretch yarn made from pre-consumer waste. In addition, 8 fabrics of the FW22/23 collection are made of Bemberg™ by Asahi Kasei - the high-tech yarn born from the transformation of cotton linters through a fully circular, transparent and traceable process with an amazing precious hand, optimal moisture management characteristics,  whose end of life guarantees its biodegradability and it also carries GRS certification.

Featuring a total of 36 fabrics, the collection is composed of:

  • 7 outerwear fabric
  • 22 sportswear fabrics
  • 7 innerwear fabrics
Source:

GB Network

(c) Indorama Ventures
18.11.2021

Indorama Ventures included in the Dow Jones Sustainability Indices (DJSI)

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical company, announced its inclusion in the Dow Jones Sustainability World Index (DJSI World) and the Dow Jones Sustainability Emerging Markets Index (DJSI Emerging Markets) for the third and fifth consecutive year respectively. The successive years of DJSI inclusion reflect IVL’s strong commitment to sustainability with globally recognized industry best-in-class practices.

This year, 139 chemical companies were selected from more than 11,000 companies from 61 industries and about 5,300 companies eligible for S&P Global ESG indices. IVL ranked in the 97th percentile with full scores in the areas of environmental and social compliance, enabling policies through industry associations, human rights protections in the workplace and value chain, and sustainable water management including forecasting potential water related risks in operations.

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical company, announced its inclusion in the Dow Jones Sustainability World Index (DJSI World) and the Dow Jones Sustainability Emerging Markets Index (DJSI Emerging Markets) for the third and fifth consecutive year respectively. The successive years of DJSI inclusion reflect IVL’s strong commitment to sustainability with globally recognized industry best-in-class practices.

This year, 139 chemical companies were selected from more than 11,000 companies from 61 industries and about 5,300 companies eligible for S&P Global ESG indices. IVL ranked in the 97th percentile with full scores in the areas of environmental and social compliance, enabling policies through industry associations, human rights protections in the workplace and value chain, and sustainable water management including forecasting potential water related risks in operations.

Yash Lohia, Chief Sustainability Officer at Indorama Ventures, said, "As a global leader, this is an important milestone in our operations as we transform the chemical industry. Our inclusion in the DJSI for the fifth year running is a tribute to how IVL’s operations are contributing to a more sustainable future. Our strategy includes focusing on climate action, aligning with the world's net zero ambitions, strengthening the circular economy and PET recycling with our ambitious targets, and enhancing shared value with our stakeholders.”

The Dow Jones Sustainability Indices (DJSI) are a global benchmark for sustainability-driven companies, evaluating material governance & economic, environmental and social factors.

Source:

Indorama Ventures Public Company Limited

(c) JEC Group
16.11.2021

JEC Forum DACH: Latest news about the event

JEC Forum DACH will open its doors from November 23 – 24, 2021, the promise of a two-days gathering around business meetings and conferences. JEC Forum DACH will offer actors of the composites profession in the region the opportunity to exchange and learn about current and future developments of the industry through a rich program of conferences, the JEC Composites Startup Booster, and the AVK Innovation Awards. It also includes pre-arranged Business Meetings between sponsors and attendees as well as sponsors’ workshops.

CONFERENCES, KEYNOTES, AND MARKET OVERVIEW
JEC Forum DACH will feature cutting-edge live conferences with experts from the industry as well as
exclusive keynotes organized by the AVK.

MEETINGS PROGRAM
In  order  to  help  the  sponsors  to  save  time  and  establish  connections  with  real-interest business partners, JEC Group has developed a Business Meetings program: an efficient facilitator to connect precise needs to corresponding offers. These one-to-one meetings will be held on the sponsors’ booths during the two days of the event.

JEC Forum DACH will open its doors from November 23 – 24, 2021, the promise of a two-days gathering around business meetings and conferences. JEC Forum DACH will offer actors of the composites profession in the region the opportunity to exchange and learn about current and future developments of the industry through a rich program of conferences, the JEC Composites Startup Booster, and the AVK Innovation Awards. It also includes pre-arranged Business Meetings between sponsors and attendees as well as sponsors’ workshops.

CONFERENCES, KEYNOTES, AND MARKET OVERVIEW
JEC Forum DACH will feature cutting-edge live conferences with experts from the industry as well as
exclusive keynotes organized by the AVK.

MEETINGS PROGRAM
In  order  to  help  the  sponsors  to  save  time  and  establish  connections  with  real-interest business partners, JEC Group has developed a Business Meetings program: an efficient facilitator to connect precise needs to corresponding offers. These one-to-one meetings will be held on the sponsors’ booths during the two days of the event.

FEATURED SPONSORS’ WORKSHOPS
JEC Forum DACH will host 9 sponsors’ workshops during the two days: CMS SPA, Elantas Europe S.r.l., Kisling AG, Kroenert GmbH & Co KG, Maschinenfabrik Herbert MEYER GmbH, Netzsch Process Intelligence GmbH and Schwarzpunkt (part of Helvoet Group), Saertex GmbH & Co KG and SVT, Trima Spol Sro and Walter Mäder AG will present their know-how and technology during 30 minutes’ presentations in front of the attendees as well as in livestreaming.

FOSTERING ENTREPRENEURSHIP WITH THE JEC COMPOSITES STARTUP BOOSTER
JEC Composites Startup Booster is the leading startup competition in the world of composites.
It enables the community to find and assess innovations with a potential impact on their respective industries. The competition will be held at JEC Forum DACH for the first time with the pitches’ session on November 23rd at 2:15pm followed by the Awards ceremony at 6:15 pm.
The finalists are: ANYBRID (Germany), CARBON CLEANUP (Austria), CARBON-DRIVE (Germany), FIBRECOAT (Germany), and TOUCH SENSITY (France).

CELEBRATING INNOVATION WITH THE AVK INNOVATION AWARDS
This year at JEC Forum DACH, JEC Group and AVK will co-organize the AVK Innovation Award.
One of the goals of the AVK Innovation Awards is to give prominence to the innovations and the companies/institutions behind them, thus publicizing their performance throughout the industry. These awards will celebrate innovations in fiber-reinforced plastics (FRP) / composites during the Awards ceremony on Tuesday 23rd, at 6:15pm.

Full program and speakers list here.

Source:

JEC Group

Mahlo: Two heads of subsidiaries celebrate anniversaries (c) Mahlo
Michel Bruni, CEO of Mahlo Italia
16.11.2021

Mahlo: Two heads of subsidiaries celebrate anniversaries

At the subsidiaries of the German Mahlo GmbH + Co KG, two branch managers are celebrating anniversaries this year. Alan Lavore, CEO of Mahlo America Inc., has been with the machine builder for 25 years. Michel Bruni, CEO of Mahlo Italia, has been part of the Mahlo family for 40 years.

Bruni began his career at Mahlo in 1981 as a service technician in the French branch Mahlo Ouest. Just one year later, he moved to Mahlo Italia, where he was appointed branch manager in 1996. He still holds this position today. Bruni is also sales manager for the Benelux countries, the Maghreb countries and Madagascar. The Mahlo Italia CEO's recipe for success includes expertise paired with experience and passion. To remain loyal to a company for so many years also testifies to a special relationship. "Then as now, I work with a dynamic and committed team. We also have a very good relationship with the employees of the parent company in Germany," says Bruni.

At the subsidiaries of the German Mahlo GmbH + Co KG, two branch managers are celebrating anniversaries this year. Alan Lavore, CEO of Mahlo America Inc., has been with the machine builder for 25 years. Michel Bruni, CEO of Mahlo Italia, has been part of the Mahlo family for 40 years.

Bruni began his career at Mahlo in 1981 as a service technician in the French branch Mahlo Ouest. Just one year later, he moved to Mahlo Italia, where he was appointed branch manager in 1996. He still holds this position today. Bruni is also sales manager for the Benelux countries, the Maghreb countries and Madagascar. The Mahlo Italia CEO's recipe for success includes expertise paired with experience and passion. To remain loyal to a company for so many years also testifies to a special relationship. "Then as now, I work with a dynamic and committed team. We also have a very good relationship with the employees of the parent company in Germany," says Bruni.

The culture and integrity with which business is conducted in the family-owned company were among the reasons why Mahlo America Inc. CEO Alan Lavore has also been with Mahlo for 25 years. "I just love working with all the great people at Mahlo." Lavore joined Mahlo in 1996 as a territory sales manager and took over as CEO in 2005. During this time, he drove the company's expansion from a textile specialist to a supplier for various production sectors such as film, paper, coating and converting or nonwovens.

More information:
Mahlo nonwovens Automation
Source:

Mahlo GmbH + Co. KG

16.11.2021

RGE: Second Annual Update on Textile Fibre Innovation and Technology

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Amid the COVID-19 pandemic continuing to restrict travel and collaboration, RGE persisted in building upon existing partnerships, while entering into new agreements. Sateri strengthened its strategic collaboration with Infinited Fiber Company, participating in the company’s EUR30 million funding round, which attracted new and existing investors such as H&M Group, Adidas, BESTSELLER and Zalando.

New partnerships formed by RGE included a five-year textile recycling research collaboration with Nanyang Technological University Singapore, and a three-year strategic partnership with the Textile and Fashion Federation Singapore which seeks, among others goals, to advance research and innovation in circular economy approaches to fashion waste in Asia.

RGE’s in-house R&D team has made good progress in advancing its textile-to-textile project, focusing on producing quality viscose using recycled cotton textiles as feedstock. To support plans to build a textile recycling facility in Indonesia, and as part of commercial feasibility analysis, studies examining the availability of textile waste and textile recycling landscapes in China, Indonesia, Sri Lanka and Bangladesh were completed.

Sateri remains on track in developing a product with 50 per cent recycled content by 2023, and to reach 100 per cent by 2030. It also aims for 20 per cent of its feedstock to contain alternative or recycled materials by 2025. In this similar vein, APR will source 20 per cent of its feedstock from alternative or recycled materials by 2030.

Source:

RGE / Omnicom Public Relations Group

16.11.2021

Gina Tricot and We aRe SpinDye in a resource-efficient collaboration

Gina Tricot releases its first collection that has been produced with We aRe SpinDye. The collection is part of Gina Tricot's innovation program Gina Lab. and consists of a coat, shirt, trousers and two bags colored with We aRe SpinDye's method.

With the collaboration, Gina Tricot continues to focus on sustainability, now with the coloring process at the center. Of all the resources that arise during the entire lifespan of a garment - from the production of raw materials, to recycling, 80% is used during the production phase itself. To maximize the effects of the sustainability changeover, an increased focus is required on the entire production process and in particular on the most resource-intensive of them all: the dyeing.

Gina Tricot releases its first collection that has been produced with We aRe SpinDye. The collection is part of Gina Tricot's innovation program Gina Lab. and consists of a coat, shirt, trousers and two bags colored with We aRe SpinDye's method.

With the collaboration, Gina Tricot continues to focus on sustainability, now with the coloring process at the center. Of all the resources that arise during the entire lifespan of a garment - from the production of raw materials, to recycling, 80% is used during the production phase itself. To maximize the effects of the sustainability changeover, an increased focus is required on the entire production process and in particular on the most resource-intensive of them all: the dyeing.

One of Gina Tricot's focus is to explore new methods and technologies in sustainability, which makes the collaboration with We aRe Spin Dye feel just right for us. Together we get a product with more durable and circular fibers, in addition with a more sustainable textile production with a focus on minimal water use. We are extremely proud of this collaboration. says Emma Garrote, Global Production & Sustainability Manager at Gina Tricot.

Gina Tricot is a shining example of an agile organization with short decision-making processes. They have managed to enthuse both the design and production department. It has been crucial to reach the launch of this collection that takes place today, says Andreas Andrén, CEO of We aRe SpinDye®.

Gina Tricot
Gina Tricot is a Swedish fashion brand that offers fashion to women in over 30 countries. Today, Gina Tricot has over 160 stores around Sweden, Norway, Denmark and Finland, as well as e-commerce throughout Europe. With around 1,900 employees, 98% of these are girls. For Gina Tricot, it is important to build pride from the inside out, we are a company that chooses to invest in and highlight women.

We aRe Spin Dye
The company is a Swedish cleantech company that provides and offers a process and platform for production and quality control that enables players in the fashion and clothing industry to significantly reduce their environmental impact. The company's business concept is to establish a new, sustainable and transparent standard for dyeing synthetic textiles in the fashion and apparel industry in a simple and user-friendly way.

More information:
We are SpinDye We aRe Spin Dye
Source:

We aRe SpinDye

(c) Avgol
15.11.2021

Avgol at Hygienix™ 2021 with biotransformation technology in nonwovens

Avgol, an Indorama Ventures company and manufacturer of high-performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s Hygienix™ event.

Nick Carter, Vice President, Nonwovens Marketing at Avgol, will be a guest speaker at the event, giving a presentation alongside Dr. DeeAnn Nelson, R&D and Innovation Manager with Avgol in North America, on ‘Biotransformation Technology in Polyolefin Fibers and Nonwoven Fabrics, Focus on Fugitive Used Articles’. “Today, the word “sustainability” does not have a unified meaning in the industries we serve,” said Nick. “Perform a regional analysis on any given customer or consumer, delve into a legislative body or advocacy group’s positioning and you will find each are likely to use the word ‘sustainable’ with varying interpretations, implementations, and implications.

The Avgol presentation, part of the Product & Process Innovation in AHPs series, will take place at 2pm on Tuesday, November 16.

Avgol, an Indorama Ventures company and manufacturer of high-performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s Hygienix™ event.

Nick Carter, Vice President, Nonwovens Marketing at Avgol, will be a guest speaker at the event, giving a presentation alongside Dr. DeeAnn Nelson, R&D and Innovation Manager with Avgol in North America, on ‘Biotransformation Technology in Polyolefin Fibers and Nonwoven Fabrics, Focus on Fugitive Used Articles’. “Today, the word “sustainability” does not have a unified meaning in the industries we serve,” said Nick. “Perform a regional analysis on any given customer or consumer, delve into a legislative body or advocacy group’s positioning and you will find each are likely to use the word ‘sustainable’ with varying interpretations, implementations, and implications.

The Avgol presentation, part of the Product & Process Innovation in AHPs series, will take place at 2pm on Tuesday, November 16.

From their base at the tabletop event, Nick and the Avgol team will be discussing the global challenge of eliminating incineration, chemical treatment, landfill, dumping and, in particular, fugitive material pollution from non-woven products.

“Following our recent success at Index 20, we will be sharing insight to our research and development strategy with Hygienix attendees, addressing the degradation performance of our products and the path forward for the industry in terms of the use of new bio-colorants, biosurfactants and new technologies. Of course, we will also be demonstrating our latest Forward Innovative Thinking (FITTM) range of hygiene materials too, including natureFITTM”, says Nick Carter.

natureFIT™ is the newest innovation in the Avgol™ technology platform, designed to imbue nonwoven fabrics with additional qualities and benefits that anticipate the shifting demands of the consumer-led retail space. The suite of fabric solutions is focused on replacing elements of spun melt fabric design, where possible, with natural alternatives. The advanced technology affords product designers a significant reduction in polymer consumption to reduce environmental impact while simultaneously enhancing softness and conformability.

Hygienix™ runs from 15 – 18 November 2021 at the Westin Kierland Resort in Scottsdale, Arizona, USA.

More information:
Avgol Hygienix™ 2021 nonwovens
Source:

Avgol / PHD Marketing Ltd

15.11.2021

Kelheim Fibres once again finishes high in Canopy's Hot Button Ranking

In the Canopy’s 2021 Hot Button Ranking, Kelheim Fibres once again occupies a leading position: With a increase of 2.5 points in the evaluation, the Bavarian viscose speciality fibre manufacturer tied for third place out of around 40 viscose fibre manufacturers worldwide and a dark green/green shirt for the second year running. The Hot Button Report not only stands for responsible raw material sourcing - it is an overall sustainability indicator for viscose fibre producers.

Especially in the areas of transparency and procurement, the NGO Canopy, which is committed to the preservation of ancient and endangered forests, awarded Kelheim Fibres top points: Kelheim Fibres is the only EMAS-certified viscose fibre manufacturer worldwide and publishes all environmentally relevant data publicly.

Kelheim Fibres also gained points in the area of "Next Generation Solutions" - the use of alternative raw materials in fibre production. Together with the Swedish textile recycling company Renewcell, the fibre experts are planning to realise the large-scale production of high-quality viscose fibres from up to 10,000 tonnes of the 100% textile recyclate Circulose® per year.

In the Canopy’s 2021 Hot Button Ranking, Kelheim Fibres once again occupies a leading position: With a increase of 2.5 points in the evaluation, the Bavarian viscose speciality fibre manufacturer tied for third place out of around 40 viscose fibre manufacturers worldwide and a dark green/green shirt for the second year running. The Hot Button Report not only stands for responsible raw material sourcing - it is an overall sustainability indicator for viscose fibre producers.

Especially in the areas of transparency and procurement, the NGO Canopy, which is committed to the preservation of ancient and endangered forests, awarded Kelheim Fibres top points: Kelheim Fibres is the only EMAS-certified viscose fibre manufacturer worldwide and publishes all environmentally relevant data publicly.

Kelheim Fibres also gained points in the area of "Next Generation Solutions" - the use of alternative raw materials in fibre production. Together with the Swedish textile recycling company Renewcell, the fibre experts are planning to realise the large-scale production of high-quality viscose fibres from up to 10,000 tonnes of the 100% textile recyclate Circulose® per year.

Source:

Kelheim Fibres GmbH