From the Sector

Reset
4 results
28.12.2023

ITMA ASIA + CITME: A success for VDMA member companies

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

Source:

VDMA e. V.
Textile Machinery

(c) VDMA
Chairperson and Vice Chairpersons of the VDMA Textile Machinery: Verena Thies, Dr. Janpeter Horn, Regina Brückner.
31.03.2022

VDMA: Dr. Janpeter Horn New Chairperson of Textile Machinery Association

Dr. Janpeter Horn, Managing Director of August Herzog Maschinenfabrik, is the new Chairperson of the VDMA Textile Machinery. Dr. Horn was elected at the members’ meeting of the Association in Leonberg. The new Executive Board is completed with Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik and Ms. Verena Thies, Managing Shareholder of Thies Textilmaschinen, who were elected as Vice Chairpersons.

After his election, Dr. Horn stated: “I am pleased to have Ms. Brückner and Ms. Thies by my side. Both have been serving on the Executive Board of the VDMA Textile Machinery as well as the European Committee of Textile Machinery Manufacturers CEMATEX for many years. With this team, we are well prepared to effectively represent the interests of the industry at national and international level.”

Based in Oldenburg, Northern Germany, Herzog is a company with a long tradition and at the same time the most innovative developer and manufacturer of braiding and winding machinery. Worldwide references in braiding and winding technique confirm the company’s technical and quality leadership.

Dr. Janpeter Horn, Managing Director of August Herzog Maschinenfabrik, is the new Chairperson of the VDMA Textile Machinery. Dr. Horn was elected at the members’ meeting of the Association in Leonberg. The new Executive Board is completed with Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik and Ms. Verena Thies, Managing Shareholder of Thies Textilmaschinen, who were elected as Vice Chairpersons.

After his election, Dr. Horn stated: “I am pleased to have Ms. Brückner and Ms. Thies by my side. Both have been serving on the Executive Board of the VDMA Textile Machinery as well as the European Committee of Textile Machinery Manufacturers CEMATEX for many years. With this team, we are well prepared to effectively represent the interests of the industry at national and international level.”

Based in Oldenburg, Northern Germany, Herzog is a company with a long tradition and at the same time the most innovative developer and manufacturer of braiding and winding machinery. Worldwide references in braiding and winding technique confirm the company’s technical and quality leadership.

The new Executive Board of the VDMA Textile Machinery for the legislative period until 2026 is composed of:

  • Dr. Janpeter Horn (Chairperson), August Herzog Maschinenfabrik
  • Regina Brückner (Vice Chairperson), BRÜCKNER Trockentechnik
  • Verena Thies (Vice Chairperson), THIES
  • Peter D. Dornier, Lindauer DORNIER
  • Stefan Flöth, A. Monforts Textilmaschinen
  • Arno Gärtner, KARL MAYER STOLL Textilmaschinenfabrik
  • Markus Kleindorp, MEMMINGER-IRO
  • Andreas Lukas, ANDRITZ Küsters
  • Benjamin Mayer, Mayer & Cie.
  • Dr. Jörg Morgner, Temafa Maschinenfabrik
  • Benjamin Reiners, Reiners + Fürst
  • Dr. Uwe Rondé, Saurer Group
  • Eric Schöller, Groz-Beckert
  • Georg Stausberg, Oerlikon Textile
  • Heinrich Trützschler, Trützschler Group
Source:

VDMA e. V.
Textilmaschinen

(c) Hochschule Reutlingen. Von links nach rechts: Dieter Herrmann, Prof. Dr. Jochen Strähle, Prof. Dr. Ulrich Scholze, Prof. Dr. Hendrik Brumme (alle Hochschule Reutlingen), Dipl.-Ing. (FH) Peter D. Dornier, Wolfgang Schöffl und Zaim Goganov (M.Sc.) (alle Lindauer DORNIER GmbH).
19.11.2021

Hochmoderne, neue Webmaschine für die Fakultät Textil & Design

Die Firma Lindauer DORNIER GmbH spendete der Fakultät Textil & Design der Hochschule Reutlingen eine neue Hochleistungs-Luftdüsenwebmaschine. Das Familienunternehmen mit Sitz in Lindau am Bodensee zählt weltweit zu den Technologieführern im Bereich Textilmaschinenbau.

Die gespendete Maschine verfügt über die hochmoderne, patentierte Antriebstechnik und ist eine wertvolle Ergänzung des weltweit einzigartigen Maschinenparks der Fakultät Textil & Design im Bereich der textilen Lehre. Inhaber und Geschäftsführungsvorsitzender, Dipl.-Ing. (FH) Peter D. Dornier, übergab “das Geschenk“ persönlich und betonte dabei, die seit Jahrzehnten und bereits zu Zeiten der Gründung der Lindauer DORNIER GmbH in den 50er-Jahren bestehende, vertrauensvolle Partnerschaft mit der Fakultät Textil & Design und deren Vorgängerorganisationen.

Studierende der Fakultät Textil & Design erhalten an der neuen Luftwebmaschine Praxis-Unterricht auf dem neuesten Stand der Technik.

Die Firma Lindauer DORNIER GmbH spendete der Fakultät Textil & Design der Hochschule Reutlingen eine neue Hochleistungs-Luftdüsenwebmaschine. Das Familienunternehmen mit Sitz in Lindau am Bodensee zählt weltweit zu den Technologieführern im Bereich Textilmaschinenbau.

Die gespendete Maschine verfügt über die hochmoderne, patentierte Antriebstechnik und ist eine wertvolle Ergänzung des weltweit einzigartigen Maschinenparks der Fakultät Textil & Design im Bereich der textilen Lehre. Inhaber und Geschäftsführungsvorsitzender, Dipl.-Ing. (FH) Peter D. Dornier, übergab “das Geschenk“ persönlich und betonte dabei, die seit Jahrzehnten und bereits zu Zeiten der Gründung der Lindauer DORNIER GmbH in den 50er-Jahren bestehende, vertrauensvolle Partnerschaft mit der Fakultät Textil & Design und deren Vorgängerorganisationen.

Studierende der Fakultät Textil & Design erhalten an der neuen Luftwebmaschine Praxis-Unterricht auf dem neuesten Stand der Technik.

Das Schussgarn wird mittels Luftstrahl ins Webfach eingetragen. Eine Technik, die insbesondere bei hohen Schusseintragsfrequenzen elektronische Regelungen für Luftdrücke und Blaszeiten der Luftdüsen im Millisekundenbereich für einen stabilen Maschinenlauf und eine hohe Gewebequalität erfordert. Die Webmaschine verfügt über die weltweit einzigartige und patentierte Antriebstechnik DORNIER SyncroDrive®. Zwei servogeregelte Motoren sorgen hier für den separaten Antrieb von Webmaschine und Fachbildeeinrichtung mit elektronischer Synchronisierung. Das Ergebnis ist die Minimierung der Gleichlaufschwankungen und die Schwingungsreduktion und damit die Maximierung der Konstanz der Gewebequalität.

Die konsequente, konstruktive Umsetzung physikalisch-technischer Zusammenhänge wird in dieser Maschine an einer Vielzahl von Einzelheiten erfahrbar und begreifbar. Damit wird die Theorie aus der Vorlesung in idealer Weise eindrücklich unterstützt und ergänzt.

In einer, nach aktuellen Verordnungen, klein gehaltenen Feierstunde brachten der Präsident der Hochschule Reutlingen, Prof. Dr. Hendrik Brumme und der Leiter des Fachgebiets Weberei, Prof. Dr.-Ing. Ulrich Scholze der Firma Lindauer DORNIER den Dank für die Spende zum Ausdruck. Dipl.-Ing (FH) Peter D. Dornier wünschte sich in seiner kurzen Rede eine interdisziplinäre Nutzung der Webmaschine durch Textiltechnologie sowie Design-Studierende und zeigte die vielversprechenden Chancen der Textiltechnologie für die Gestaltung einer nachhaltigeren Zukunft auf.
Die großzügige Spende ist ein Meilenstein in der langjährigen Beziehung zwischen der Fakultät Textil & Design und der Firma DORNIER, deren Inhaber sich auch als Stiftungspräsident der Walter-Reiners-Stiftung stark für den textilen Nachwuchs engagiert.

Ergänzt wurde die Spende der Webmaschine mit dem von der Kuenzel GmbH, Münchberg, kostenlos überlassenen Webblatt, sowie der gestifteten Webkette und Schussgarne durch die Zweigart & Sawitzki GmbH & Co.KG, Sindelfingen.

Source:

Hochschule Reutlingen

Virtual RISE Conference Highlights (c) INDA
RISE 2021 Award Winner Canopy
06.10.2021

Virtual RISE Conference Highlights

  • Next-Gen Technologies for Nonwovens/Engineered Materials
  • Canopy Respirator from Canopy Wins Innovation Award

145 professionals in product development, material science, and new technologies convened for the 11th conference edition of RISE®—Research, Innovation & Science for Engineered Fabrics, held virtually, Sept. 28-30. The event was co-organized by INDA, the Association of the Nonwoven Fabrics Industry, The Nonwovens Institute, and North Carolina State University.

The program focused on Nonwoven Material Science Developments, Sustainability, Increasing Circularity, Promising Innovations, Process Innovations, Material Innovations, Government/NGO Challenges to Single-Use Plastics, Machine-Assisted-Learning Development of Biopolymers, and Market Intelligence and Economic Insights.

Participants praised the high-quality program content, in-depth round table discussions, networking and Q&A’s where participants ask expert speakers questions pertaining to their focused presentations.

Highlights among the 26 presentations included

  • Next-Gen Technologies for Nonwovens/Engineered Materials
  • Canopy Respirator from Canopy Wins Innovation Award

145 professionals in product development, material science, and new technologies convened for the 11th conference edition of RISE®—Research, Innovation & Science for Engineered Fabrics, held virtually, Sept. 28-30. The event was co-organized by INDA, the Association of the Nonwoven Fabrics Industry, The Nonwovens Institute, and North Carolina State University.

The program focused on Nonwoven Material Science Developments, Sustainability, Increasing Circularity, Promising Innovations, Process Innovations, Material Innovations, Government/NGO Challenges to Single-Use Plastics, Machine-Assisted-Learning Development of Biopolymers, and Market Intelligence and Economic Insights.

Participants praised the high-quality program content, in-depth round table discussions, networking and Q&A’s where participants ask expert speakers questions pertaining to their focused presentations.

Highlights among the 26 presentations included

  • Sustainable Solutions for our Plastic Planet Predicament, by Marc A. Hillmyer, Ph.D., McKnight Presidential Endowed Chair, University of Minnesota;
  • Closed-Loop Recycling Pilot of Single-Use Face Masks by Peter Dziezok, Ph.D., Director of Open Innovation, Proctor & Gamble;
  • Innovating a Sustainable Future for Nonwovens: A European Perspective, by Matt Tipper, Ph.D., CEO, Nonwovens Innovation & Research Institute (NIRI);
  • Phantom Platform: The Polyolefin-cellulose Coformed Substrates Technology, by Fabio Zampollo, CEO and Founder of Teknoweb Materials; 
  • Guiding Environmentally Sustainable Innovations – From Reactive to Proactive Life Cycle Management, by Valentina Prado, Ph.D., Senior Sustainability Analyst, EarthShift Global LLC;  
  • High-Loft, Ultra-Soft Hygiene Solutions, Paul E. Rollin, Ph.D., Senior Principal Scientist – Global Hygiene, Propylene-Vistamaxx-Adhesion (PVA) Global Technology, ExxonMobil Chemical Company;
  • Canadian Plastic Policy Update, by Karyn M. Schmidt, Senior Director, Regulatory & Technical Affairs, American Chemistry Council (ACC).

Other highlights included the announcement of Canopy Respirator as the winner of this year’s RISE® Innovation Award winner. The annual award recognizes innovation in areas within and on the periphery of the nonwovens industry which use advanced science and engineering principles to develop unique or intricate solutions to problems and advance the usage of nonwovens.

RISE® Innovation Award Winner
The RISE® Innovation Award was presented to Canopy for their Canopy Respirator. The productis an innovative respirator that is fully mechanical, non-electrostatic, with a filter designed for superior breathability while offering the wearer facial transparency. The breakthrough respirator features 5.5mm water column resistance at 85 liters (3 cubic feet) per minute, 2-way filtration, and a pleated filter that contains over 500 square centimeters of surface area. The patented Canopy respirator resists fluids, and eliminates fogging of eyeglasses.

Source:

INDA, Association of the Nonwoven Fabrics Industry