From the Sector

Reset
16 results
28.07.2023

RadiciGroup: Bibs made from recyclable materials for UCI Cycling World Championships

On the occasion of the 2023 UCI Cycling World Championships, the Union Cycliste Internationale chose Santini to make the bibs from recyclable materials. The UCI's partner brought together a pool of companies, all in the Bergamo area (Italy): RadiciGroup, Sitip, EFI Reggiani and Acerbis.

In 2022, the Union Cycliste Internationale released the UCI Climate Action Charter, which lays out an action plan to advance the environmental sustainability of the sport with a specific principle to reduce waste and accelerate the transition to a circular economy. This year, the UCI Cycling World Championships, which will be held from 3 to 13 August, are bringing together most of the cycling disciplines in a single location: Glasgow and across Scotland.

On the occasion of the 2023 UCI Cycling World Championships, the Union Cycliste Internationale chose Santini to make the bibs from recyclable materials. The UCI's partner brought together a pool of companies, all in the Bergamo area (Italy): RadiciGroup, Sitip, EFI Reggiani and Acerbis.

In 2022, the Union Cycliste Internationale released the UCI Climate Action Charter, which lays out an action plan to advance the environmental sustainability of the sport with a specific principle to reduce waste and accelerate the transition to a circular economy. This year, the UCI Cycling World Championships, which will be held from 3 to 13 August, are bringing together most of the cycling disciplines in a single location: Glasgow and across Scotland.

To mark the occasion, the UCI turned to its Official Partner, Santini, to make the bibs that the staff (judges, volunteers, commissaires etc.) and accredited photographers wear throughout the event. The bibs are "eco-designed", which means they are specifically created to have a second life after use. Once the event is over, the bibs could be collected and sent to RadiciGroup and transformed into new material, to be then processed by Acerbis to create X-Elite handguards for mountain bikes. This project is a concrete example of the circular economy at work, allowing 100% of the materials used to be recovered.

To optimise the production cycle of the bibs for the 2023 UCI Cycling World Championships, the products must be eco-friendly from the very first phase. The fabrics were therefore made from Italian nylon yarn produced by RadiciGroup. The choice of nylon – an infinitely recyclable thermoplastic material – is intertwined with UCI's sustainability goals for "limited-use" garments: RadiciGroup was able to channel its know-how and expertise in the field of chemistry to create "circular" bibs, working alongside the other partners. As the innovative yarn selected by RadiciGroup allows for easy and high-quality printing, the fabric is also customisable. The yarn is then provided to Sitip to create the "ARAS NG" warp-knitted fabric (95 g/100 m2): a recyclable single-fibre material made from 100% polyamide. The resulting fabric is the first nylon of its kind, designed to meet the transfer printing needs of the third project partner, EFI Reggiani, as well as the recyclability standards requested by RadiciGroup. The choice of fabric was born from extensive applied research, in which EFI Reggiani tested a wide range of fabrics to find the best colour results and the best resistance to rubbing and perspiration, which is vital for the bibs' intended use. In addition to using the new GOTS-certified EFI Reggiani IRIS Plus water-based inks, EFI Reggiani opted for a printing solution on transfer paper that does not consume water and requires a minimal amount of energy per square metre. Finally, the white fabric from Sitip and the transfer paper printed by EFI Reggiani arrived at Santini, who were responsible for transferring all the graphics for the 2023 UCI Cycling World Championships bibs from the paper onto the fabric. Santini also took care to assemble the garments using only thread and components made from nylon or chemically similar materials, allowing the bibs to enter the recycling process at the end of their lives without any further processing.                   

Source:

RadiciGroup

09.06.2023

EFI Reggiani showcases its innovations at ITMA 2023

At ITMA 2023, EFI™ Reggiani is presenting its sustainable Reggiani ecoTERRA pigment printing line up, the high-speed EFI Reggiani HYPER and Reggiani BOLT XS direct-to-fabric printing solutions, and EFI Inèdit end-to-end digital textile workflows.

At ITMA 2023, EFI™ Reggiani is presenting its sustainable Reggiani ecoTERRA pigment printing line up, the high-speed EFI Reggiani HYPER and Reggiani BOLT XS direct-to-fabric printing solutions, and EFI Inèdit end-to-end digital textile workflows.

The EFI Reggiani ecoTERRA solution is an all-in-one solution for water-based pigment printing that requires no ancillary equipment for pre- and post-treatment. By reducing water, energy and chemicals consumption in the overall process, customers can now obtain a sustainable, direct-to-fabric printing solution. For the first time at ITMA, EFI Reggiani is presenting its full ecoTERRA line up of four models, including a 340 printing width, with speeds ranging from 150 to 600 sqm/hour. This allows customers to choose the best TCO/ROI based on output volume and speed range.
 
Reggiani ecoTERRA water-based pigment inks deliver excellent wet and dry fastness properties, sharpness in detail, and durability while also ensuring printhead longevity with reduced maintenance costs. Thanks to the enhanced polymerisation and finishing unit, EFI Reggiani ecoTERRA also provides an enhanced tactile experience and fabric softness.
 
In addition to highlighting EFI Reggiani’s sustainable product offering, the company will also demonstrate the significant productivity and efficiency advantages offered by its portfolio of high-speed, high-performance digital textile printers at ITMA 2023. Attendees will discover how mass production can transition to a digital, on-demand workflow with the high speeds and high print quality of the EFI Reggiani HYPER scanning printer and the next-generation EFI Reggiani BOLT XS single-pass textile printer.

Visitors to the booth also will see EFI Reggiani’s new proprietary end-to-end digital printing workflow and the latest enhancements to EFI Inèdit digital textile software. Inèdit, now part of EFI Reggiani, is one of the leading developers of raster image processors (RIPs) and related software for digital industrial textile printing. The EFI Reggiani end-to-end workflow with Inèdit integration boosts productivity and production capabilities for digital textile print operations while ensuring maximum security for customer’s designs thanks to two-level encryption.
 
EFI Reggiani QUERY, the user-friendly, advanced data analysis tool to measure printer performance, keep track of real costs per metre, and monitor water and energy consumption, will also be demonstrated.

(c) EFI GmbH
30.12.2022

EFI Reggiani with textile printing solutions at India ITME 2022

Textile companies could take full advantage of expanded print opportunities with EFI™ Reggiani textile solutions presented at the 8-13 December India ITME Exhibition in Greater Noida.

The EFI Reggiani TERRA Silver printer was shown at ITME 2022: a solution to enter the industrial printing segment with a short, smart and green process. The EFI Reggiani TERRA Solution eliminates the need for steaming or washing on direct-to-textile applications, using a greener, more efficient polymerisation process that takes place as the printed textile goes through the printer’s on-board dryer. As a result, users can achieve superior printing results while using less time, water, and energy.

The EFI Reggiani exhibit at ITME was also promoting:

Textile companies could take full advantage of expanded print opportunities with EFI™ Reggiani textile solutions presented at the 8-13 December India ITME Exhibition in Greater Noida.

The EFI Reggiani TERRA Silver printer was shown at ITME 2022: a solution to enter the industrial printing segment with a short, smart and green process. The EFI Reggiani TERRA Solution eliminates the need for steaming or washing on direct-to-textile applications, using a greener, more efficient polymerisation process that takes place as the printed textile goes through the printer’s on-board dryer. As a result, users can achieve superior printing results while using less time, water, and energy.

The EFI Reggiani exhibit at ITME was also promoting:

  •  EFI Reggiani HYPER printer, a scanning printer available in 1.8-metre, 2.4-metre or 3.4-metre widths that prints at up to 20 linear metres per minute peak speed, making it the fastest textile scanning printer on the market;
  • Mezzera Concord, the continuous rope washing line from the specialist in washing solutions that transports fabric by overflow for tensionless running with an independent squeezing mangle for each channel;
  • One of the industry’s broadest line-ups of high-end, superior-quality textile inks, including EFI Reggiani AQUA and EFI Reggiani Diamond reactive, IRIS dye-sublimation, ARIA direct disperse, FUOCO acid, and GEA and TERRA pigment inks; and
  • Inèdit, recently acquired by EFI Reggiani, a developer of raster image processors (RIPs) and related software for digital industrial textile printing with their product portfolio that features proven, highly advanced workflow solutions for textile profiling, calibration, design integration and much more.
Source:

EFI GmbH

Foto: EFI Reggiani
27.07.2022

EFI Reggiani: Grundsteinlegung für neuen Textilcampus

EFI™ Reggiani, der Unternehmensbereich für industriellen Textildruck des Drucktechnologieunternehmens Electronics For Imaging, Inc. (EFI), hat den Grundstein für einen neuen Textilcampus gelegt. Der neue 20.000 Quadratmeter große Campus im italienischen Comun Nuovo, Bergamo, soll bis Mitte des Jahres 2023 fertiggestellt sein.

EFI™ Reggiani, der Unternehmensbereich für industriellen Textildruck des Drucktechnologieunternehmens Electronics For Imaging, Inc. (EFI), hat den Grundstein für einen neuen Textilcampus gelegt. Der neue 20.000 Quadratmeter große Campus im italienischen Comun Nuovo, Bergamo, soll bis Mitte des Jahres 2023 fertiggestellt sein.

Die neue Anlage wurde unter Berücksichtigung der ökologischen Nachhaltigkeit und des Wohlbefindens der Mitarbeiter entworfen: die Installation von 400 Kilowatt-Solarzellen ist geplant. Diese sollen 60 % des gesamten Energiebedarfs der Einrichtung decken. Zudem soll das Gebäude von einer umfassenden Isolierung profitieren, um Heiz- und Kühlkosten zu senken. Zahlreiche Oberlichter sorgen im Gebäude für eine bessere natürliche Beleuchtung und verringern so den Einsatz von künstlichem Licht. Bei der Planung wurde den Grünflächen auf dem Campus Priorität eingeräumt. Sie werden ca. 20 % der Gesamtfläche ausmachen.
 
Das 3.000 Quadratmeter große Democenter in der neuen Anlage ist fast doppelt so groß wie das derzeitige EFI Reggiani-Democenter im italienischen Grassobbio. Es dient als Hightech-Ausstellungsfläche für die EFI Reggiani Drucker sowie für die Produkte von Mezzera zur Vor- und Nachbehandlung und für Produkte von Jaeggli zur Garnbehandlung. Im Democenter wird auch das vor Kurzem von EFI Reggiani erworbene Portfolio von Inèdit Raster Image Processing (RIP)- und Workflow-Softwarelösungen vorgestellt werden.

More information:
EFI Reggiani EFI
Source:

EFI Reggiani

(c) EFI
19.07.2022

EFI™ Reggiani: New textile campus to accommodate ongoing growth

EFI™ Reggiani, the industrial textile printing business of printing technology company Electronics For Imaging, Inc. (EFI), has broken ground on a new textile campus to accommodate ongoing growth. The new 20,000-square-metre campus in Comun Nuovo, Bergamo, Italy, is expected to be completed midyear in 2023.

EFI™ Reggiani, the industrial textile printing business of printing technology company Electronics For Imaging, Inc. (EFI), has broken ground on a new textile campus to accommodate ongoing growth. The new 20,000-square-metre campus in Comun Nuovo, Bergamo, Italy, is expected to be completed midyear in 2023.

Sustainability and employee well-being at the centre
The new facility was designed with environmental sustainability and employee well-being in mind. That focus includes plans to install 400 kilowatts of solar panels supplying 60% of the facility’s total energy requirements. Moreover, the building will benefit from superior thermal insulation that will ensure a reduction in heating and cooling costs. Numerous skylights in the facility will provide better natural lighting and a reduction in artificial lighting usage.
 
Green space on the campus was a priority in the design process, covering an estimated 20% of the total area. For a more welcoming work environment, the campus will also feature a canteen and gymnasium for employee use.
 
A 3,000-square-metre demo centre in the new facility will be nearly twice as large as the current EFI Reggiani demo centre in Grassobbio, Italy, offering a high-end, high-tech showcase for state-of-the-art EFI Reggiani printers, as well as Mezzera pre- and post-treatment and Jaeggli yarn treatment products. The demo centre will also feature EFI Reggiani’s recently acquired portfolio of Inèdit raster image processing (RIP) and workflow software solutions.
 
Transforming the textile industry through innovation in green
Since the launch of its first analogue printer, to its newest digital solutions, EFI Reggiani has at its core a heritage and expertise that have contributed to the transformation of the textile industry worldwide. With its total commitment to providing “Innovation in Green,” EFI Reggiani’s leadership is the result of extensive research targeted at improving productivity, quality and sustainability in its customers’ operations. The company is focused on optimising the textile manufacturing process – and reducing energy use, water consumption and overall environmental impact – to ensure customers’ business growth and profitability.
 
Over the years, EFI Reggiani’s product portfolio has continued to expand, ranging from rotary and flatbed printing machines, to scanning/multi-pass digital printers, to fast digital textile printers.

Source:

EFI

07.06.2022

EFI confirms Acquisition of Inèdit Software for textile printing

Electronics For Imaging, Inc. announced that it has acquired Inèdit Software S.L., a developer of raster image processors (RIPs) and related software for digital industrial textile printing. The acquisition extends EFI’s strategy to accelerate digital transformation in industrial print through investments that advance the company’s presence and capabilities in Packaging & Corrugated, Display Graphics, Textile, and Building Materials/Décor applications. Inèdit will be integrated into the Reggiani textile business.

Electronics For Imaging, Inc. announced that it has acquired Inèdit Software S.L., a developer of raster image processors (RIPs) and related software for digital industrial textile printing. The acquisition extends EFI’s strategy to accelerate digital transformation in industrial print through investments that advance the company’s presence and capabilities in Packaging & Corrugated, Display Graphics, Textile, and Building Materials/Décor applications. Inèdit will be integrated into the Reggiani textile business.

Similar to EFI’s Fiery® digital front end and RIP technologies for the digital commercial and industrial printing markets, Inèdit’s neoStampa product is a recognized benchmark solution for RIPs in digital textile printing. The Inèdit product portfolio features advanced workflow solutions for textile profiling, calibration, design integration and much more. Inèdit’s RIP technology is employed across the worldwide textile industry and is one of the leading RIPs used to drive EFI Reggiani digital printers and other digital industrial textile printer brands. As part of EFI Reggiani, Inèdit will continue to support products for a broad range of digital printers.

Source:

EFI

22.02.2022

Baldwin partners with Blutec S.A. de C.V. to serve Mexico’s textile industry

Baldwin Technology Company Inc. has forged a new partnership with Blutec S.A. de C.V., which now represents Baldwin’s full range of innovative spray systems and corona/plasma treaters for wovens, knits and nonwovens in Mexico.

Blutec is a leading agency in the textile sector, representing many of the most reputable textile machinery manufacturers worldwide. Present in the Mexican market for more than 25 years, Blutec is committed to collaborating with companies on the forefront of textile manufacturing technology, including Brückner, Mahlo, EFI Reggiani, Ferraro and, now, Baldwin.

Baldwin Technology Company Inc. has forged a new partnership with Blutec S.A. de C.V., which now represents Baldwin’s full range of innovative spray systems and corona/plasma treaters for wovens, knits and nonwovens in Mexico.

Blutec is a leading agency in the textile sector, representing many of the most reputable textile machinery manufacturers worldwide. Present in the Mexican market for more than 25 years, Blutec is committed to collaborating with companies on the forefront of textile manufacturing technology, including Brückner, Mahlo, EFI Reggiani, Ferraro and, now, Baldwin.

Baldwin’s precision spray systems for finishing and remoistening use non-contact spray technology to provide optimal controlled coverage of the exact amount of liquids needed to achieve the specific characteristics of the fabric—saving customers time, money and valuable resources. Because only the required amounts of water and chemicals are applied, water consumption can be reduced by up to 50%, contributing to considerably improved productivity in the finishing process.
In addition, these solutions can process a wide range of low-viscosity water-based chemicals—such as softeners, antimicrobial agents, durable water repellents, flame retardants and more—for woven fabrics, knitted textiles and nonwovens.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

20.12.2021

EFI: New Innovations in Digital Textile at EFI Reggiani Open House

During an expansive, three-day Electronics For Imaging, Inc. open house this month at the company’s EFI™ Reggiani industrial textile printer facility, textile and apparel manufacturers witnessed first-hand the market-leading innovations that provide users with new opportunities. The December open house, which drew more than 70 attendees from over 23 different European, South American, and Middle Eastern countries, featured informative sessions with product experts on a diverse range of topics, covering new and trending market applications for textile manufacturers.

Attendees witnessed live demonstrations of eight advanced digital printers during the open house, including the new EFI Reggiani HYPER, EFI Reggiani TERRA Silver scanning/multi-pass printer, and EFI Reggiani BLAZE as well as the EFI Reggiani BOLT – the award-winning single-pass offering that is the one of the fastest digital textile printers.

During an expansive, three-day Electronics For Imaging, Inc. open house this month at the company’s EFI™ Reggiani industrial textile printer facility, textile and apparel manufacturers witnessed first-hand the market-leading innovations that provide users with new opportunities. The December open house, which drew more than 70 attendees from over 23 different European, South American, and Middle Eastern countries, featured informative sessions with product experts on a diverse range of topics, covering new and trending market applications for textile manufacturers.

Attendees witnessed live demonstrations of eight advanced digital printers during the open house, including the new EFI Reggiani HYPER, EFI Reggiani TERRA Silver scanning/multi-pass printer, and EFI Reggiani BLAZE as well as the EFI Reggiani BOLT – the award-winning single-pass offering that is the one of the fastest digital textile printers.

EFI Reggiani HYPER – a fast scanning digital printer
The new EFI Reggiani HYPER is a scanning printer available in 1.8-metre, 2.4-metre or 3.4-metre widths. The Reggiani HYPER model targets the industrial high-speed segment of the multi-pass textile printing sector.

With an up to eight-colour configuration, it prints at speeds up to 13 linear metres per minute in two-pass production mode. The new printer is suitable for high-quality production on knitted or woven fabrics and is designed with smart technology that enables it to be integrated into Industry 4.0 projects.

Sustainable direct-to-textile printing with the EFI Reggiani TERRA Silver
The new-version TERRA Silver printer is part of EFI’s complete TERRA line-up of pigment ink printer solutions. It allows print service providers to enter the world of industrial textile with a short, smart and green production process.
The printer also features:

  • A new recirculating ink system for superior reliability and minimum maintenance
  • Several printing modes to ensure maximum flexibility in terms of design capability
  • New, real-time image processing that eliminates time spent in image pre-calculations
  • A user friendly, intuitive interface
  • A more-efficient polymerisation process that takes place as printed textile goes through the printer’s on-board dryer.

EFI Reggiani BLAZE, an ideal entry solution for industrial textile printing
The EFI Reggiani BLAZE printer is designed to give textile companies the opportunity to enter the digital textile printing market with a compact solution. The new, 1.8-metre-wide printer offers an innovative, low-maintenance, continuous recirculation ink system equipped with a level sensor and degassing as well as a print head crash protective system for longer printhead life and superior uptime.

The upgraded EFI Reggiani BOLT – one of the fastest digital textile printers
In 2021, the EFI Reggiani BOLT received a combination of hardware and software enhancements that minimise artifacts, compensating for missing nozzles that may occur over time and enhancing uniformity to deliver smoother solid colours. The upgrade also delivers improved quality and smoother gradients, plus it enables faster printhead replacement and drastically increases file processing speed by up to 200% for large, complex files.

Source:

EFI GmbH

13.10.2021

Launch of EFI Reggiani TERRA Silver

  • EFI Reggiani TERRA Silver Makes Debut at Fespa Global Print Expo 2021 for a Short, Smart and Green Process
  • The new, industrial, entry-level EFI™ Reggiani TERRA Silver textile printer from Electronics For Imaging, Inc. is making its debut at the Fespa Global Print Expo 2021 tradeshow, 12-15 October at RAI Amsterdam.
  • The EFI Reggiani TERRA Silver uses unique TERRA pigment ink for high-quality, highly sustainable direct-to-textile printing without steaming or washing.       

“This is one of the first trade shows to return after the pandemic, and we are very excited to again meet customers in person and showcase an innovative offering that delivers superior printing results while using less time, water and energy,” said EFI Reggiani Vice President and General Manager Adele Genoni. “We are introducing this advanced EFI Reggiani TERRA Silver solution to the many print service providers at Fespa, presenting them with an ideal path to enter the industrial textile segment with a short, smart and green production process.”

  • EFI Reggiani TERRA Silver Makes Debut at Fespa Global Print Expo 2021 for a Short, Smart and Green Process
  • The new, industrial, entry-level EFI™ Reggiani TERRA Silver textile printer from Electronics For Imaging, Inc. is making its debut at the Fespa Global Print Expo 2021 tradeshow, 12-15 October at RAI Amsterdam.
  • The EFI Reggiani TERRA Silver uses unique TERRA pigment ink for high-quality, highly sustainable direct-to-textile printing without steaming or washing.       

“This is one of the first trade shows to return after the pandemic, and we are very excited to again meet customers in person and showcase an innovative offering that delivers superior printing results while using less time, water and energy,” said EFI Reggiani Vice President and General Manager Adele Genoni. “We are introducing this advanced EFI Reggiani TERRA Silver solution to the many print service providers at Fespa, presenting them with an ideal path to enter the industrial textile segment with a short, smart and green production process.”

The new-version TERRA Silver printer is part of EFI’s complete TERRA line-up of pigment ink printer solutions. It is a 180-cm wide printer that can print up to 190 sqm per hour with eight dual-channel printheads. The printer also features:

•    A new recirculating ink system for superior reliability and minimum maintenance
•    Several printing modes to ensure maximum flexibility in terms of design capability
•    New, real-time image processing that eliminates time spent in image pre-calculations
•    A user friendly, intuitive interface
•    A more-efficient polymerisation process that takes place as printed textile goes through the printer’s on-board dryer.

In Fespa stand 1-G71, attendees can see the EFI Reggiani TERRA Silver print smoothly and precisely on knitted and woven fabrics. The printer’s quality is evident in its high-uniformity printing modes, and it delivers numerous features that enhance the production process, including an accurate WYSIWYG interface and flexible queue management.
 
EFI Reggiani is also a leading developer of textile inks. The EFI Reggiani TERRA pigment inks used on the Silver model deliver excellent wet and dry fastness properties and remarkable sharpness in detail. Designed to leverage EFI Reggiani digital printers’ market-proven industrial performance capabilities, these eco-friendly, water-based inks provide an extraordinary level of print durability and yield longer print head life with reduced maintenance costs. The high-performance digital pigment inks also use an innovative binder technology for fast, sustainable, and cost-competitive industrial textile printing on the widest range of fabrics. Users also gain superior print definition and colour intensity.
 
This year, EFI Reggiani celebrates 75 years of heritage and innovation in the textile world. Always committed to deliver to the market new cutting-edge technologies, EFI Reggiani has world-class products offering boosted uptime and reliability, high performance throughput, and remarkable printing uniformity and accuracy – all while helping customers increase the sustainability of their textile manufacturing activities. Green EFI Reggiani processes give users fast, complete and sustainable solutions across a broad range of textile applications.
 
In this 75th anniversary year, EFI Reggiani has also launched several other ground-breaking solutions, such as EFI Reggiani HYPER, the fastest scanning digital printer on the market, and the EFI Reggiani BLAZE, an industrial entry-level, easy-to-use printer designed to give new textile companies the opportunity to adopt digital inkjet production with a compact solution to blaze a successful path into the industry.

Source:

Electronics For Imaging, Inc.

16.09.2021

EFI Reggiani: Neuer digitaler Textildrucker mit Scanfunktion

Electronics For Imaging, Inc. bringt heute seinen dritten neuen digitalen Textildrucker des Jahres 2021 auf den Markt, der einen hohen realen Produktionsdurchsatz für einen digitalen Textildrucker mit Scanfunktion liefert. Mit einer Konfiguration von bis zu acht Farben druckt der EFI Reggiani HYPER bis zu 13 laufende Meter pro Minute im Produktionsmodus mit zwei Durchgängen und ist damit einer der schnellsten Textildruckern mit Scanfunktion auf dem Markt. Der neue Drucker eignet sich für die Produktion auf gestrickten oder gewebten Textilien und ist mit einer intelligenten Technologie ausgestattet, die es ermöglicht, ihn in Industrie 4.0 Projekte zu integrieren.

EFI präsentiert den neuen EFI Reggiani HYPER Drucker auf der Messe TME Exhibition Textile Machinery Fair, die vom 8. bis zum 11. September im Istanbul Expo Center stattfindet.

Electronics For Imaging, Inc. bringt heute seinen dritten neuen digitalen Textildrucker des Jahres 2021 auf den Markt, der einen hohen realen Produktionsdurchsatz für einen digitalen Textildrucker mit Scanfunktion liefert. Mit einer Konfiguration von bis zu acht Farben druckt der EFI Reggiani HYPER bis zu 13 laufende Meter pro Minute im Produktionsmodus mit zwei Durchgängen und ist damit einer der schnellsten Textildruckern mit Scanfunktion auf dem Markt. Der neue Drucker eignet sich für die Produktion auf gestrickten oder gewebten Textilien und ist mit einer intelligenten Technologie ausgestattet, die es ermöglicht, ihn in Industrie 4.0 Projekte zu integrieren.

EFI präsentiert den neuen EFI Reggiani HYPER Drucker auf der Messe TME Exhibition Textile Machinery Fair, die vom 8. bis zum 11. September im Istanbul Expo Center stattfindet.

Source:

EFI GmbH

08.09.2021

EFI Reggiani Launches the Fastest High-Quality Scanning Digital Textile Printer in the Market

  • New HYPER model produces extraordinary printing quality at unparalleled speed, approaching single-pass throughput

Electronics For Imaging, Inc. is launching its third new digital textile printer of 2021, delivering the world’s highest real production throughput for a scanning digital textile printer. The EFI™ Reggiani HYPER is a scanning printer available in 1.8-metre, 2.4-metre or 3.4-metre widths. With an up to eight-colour configuration, the EFI Reggiani HYPER prints at up to 13 linear metres per minute in two-pass production mode, making it the fastest textile scanning printer on the market. The new printer is suitable for high-quality production on knitted or woven fabrics and is designed with smart technology that enables it to be integrated into Industry 4.0 projects.

  • New HYPER model produces extraordinary printing quality at unparalleled speed, approaching single-pass throughput

Electronics For Imaging, Inc. is launching its third new digital textile printer of 2021, delivering the world’s highest real production throughput for a scanning digital textile printer. The EFI™ Reggiani HYPER is a scanning printer available in 1.8-metre, 2.4-metre or 3.4-metre widths. With an up to eight-colour configuration, the EFI Reggiani HYPER prints at up to 13 linear metres per minute in two-pass production mode, making it the fastest textile scanning printer on the market. The new printer is suitable for high-quality production on knitted or woven fabrics and is designed with smart technology that enables it to be integrated into Industry 4.0 projects.

The new EFI Reggiani HYPER targets the industrial high-speed segment of the multi-pass textile printing sector. Not only is it the fastest multi-pass printer that EFI Reggiani has ever developed, but the fastest of its kind in the market, offering extraordinary printing quality with unmatched productivity.
 
The HYPER’s superfast carriage with 72 printheads can print two passes with production quality at speeds up to 13 metres per minute for a 1.5-metre-wide roll, or up to 10 metres per minute for a 3-metre-wide roll. On a 3.4-metre Reggiani HYPER printer, users can print a pair of 1.5-metre-wide rolls in parallel, delivering a total throughput of up to 20 metres per minute, which is comparable to some single-pass printers currently in the market.
 
The printer is powered by EFI Reggiani genuine inks, with high-quality formulas developed to ensure the best performance in terms of runnability and longer printhead life while producing astonishing colour depth and brightness, as well as excellent fastness properties.       

 

24.06.2021

The EFI Reggiani BOLT delivers higher Image Quality

Electronics For Imaging, Inc. has enhanced its fastest digital textile printer, the EFI™ Reggiani BOLT. The upgrade is a combination of hardware and software enhancements that will minimise artefacts, compensating for missing nozzles that may occur over time and enhancing uniformity to deliver smoother solid colours. The upgrade also delivers improved quality and smoother gradients, plus it enables faster printhead replacement and drastically increases file processing speed by up to 200% for large, complex files.

Now available globally, the EFI Reggiani BOLT upgrade features hardware and software enhancements for improved overall performance, printing quality, uniformity, and increased user friendliness including:

Electronics For Imaging, Inc. has enhanced its fastest digital textile printer, the EFI™ Reggiani BOLT. The upgrade is a combination of hardware and software enhancements that will minimise artefacts, compensating for missing nozzles that may occur over time and enhancing uniformity to deliver smoother solid colours. The upgrade also delivers improved quality and smoother gradients, plus it enables faster printhead replacement and drastically increases file processing speed by up to 200% for large, complex files.

Now available globally, the EFI Reggiani BOLT upgrade features hardware and software enhancements for improved overall performance, printing quality, uniformity, and increased user friendliness including:

  • Nozzle out and uniformity compensation features that improve solid colour appearance and enhance overall printing quality
  • Increased performance and improved processing speed for large, complex files
  • Integration of a new digital camera that both provides for precise and consistent print results and shortens the time for print head replacement and alignment
  • An enhanced user interface – based on EFI Fiery Command WorkStation® 6.0 – that is easier to use
  • Fiery Smart Ink Estimator, a key tool to help determine job profitability based on accurate calculation of ink costs prior to printing.
11.06.2021

EFI Reggiani introduces Textile Digital Printer

The new, industrial, entry-level EFI™ Reggiani BLAZE scanning printer from Electronics For Imaging, Inc. is making its debut at the ITMA Asia tradeshow, 12-16 June in Shanghai, China. The high-quality printer is an easy-to-use, smart solution to help textile companies blaze their successful trail into the world of efficient, sustainable industrial inkjet printing. It is equipped with EFI Reggiani’s state-of-the-art technology, offering high quality, reliability and flexibility on the widest variety of designs.

The new, industrial, entry-level EFI™ Reggiani BLAZE scanning printer from Electronics For Imaging, Inc. is making its debut at the ITMA Asia tradeshow, 12-16 June in Shanghai, China. The high-quality printer is an easy-to-use, smart solution to help textile companies blaze their successful trail into the world of efficient, sustainable industrial inkjet printing. It is equipped with EFI Reggiani’s state-of-the-art technology, offering high quality, reliability and flexibility on the widest variety of designs.

Cutting-edge technology in a compact footprint
The EFI Reggiani BLAZE printer is designed to give textile companies the opportunity to enter the digital textile printing market with a compact solution. The new, 1.8-metre wide printer offers an innovative, low-maintenance, continuous recirculation ink system equipped with a level sensor and degassing as well as a printhead crash protective system for longer printhead life and superior uptime.
 
Thanks to its cutting-edge printhead reliability and low maintenance costs for a competitive TCO (total cost of ownership), the BLAZE printer can produce up to 125 linear metres per hour with a printing resolution up to 600x1200 dots per inch (dpi). The printer – which delivers excellent productivity as one of the fastest digital inkjet solutions in its class – has eight 300-dpi dual channel printheads and can print in up to eight colours with full variable drop size.

Flexible fabric feed and handling for higher productivity
The EFI Reggiani BLAZE is equipped with a continuous and switchable belt washing unit to remove water and fabric hairs. An embedded device for adhesive application offers the possibility to use thermoplastic, resin and permanent adhesives.
 
The printer also includes other features for enhanced productivity and value, including a 400-mm roll unwinder, expandable shafts, an air gun and a pneumatic bar for standard fabrics.

Efficient software and electronics technology
The Reggiani BLAZE printer offers a friendly and intuitive user interface with real-time image processing and flexible queue management. The software also runs a WYSIWYG (What You See Is What You Get) job editor, as well as tools to accurately predict printing speed and ink usage.

EFI Reggiani TERRA Silver enhancement
EFI has also released an enhanced version of the EFI Reggiani TERRA Silver printer, a 1.8-metre wide printer operating with EFI Reggiani’s unique TERRA pigment ink with binder solution for high-quality, highly sustainable, direct-to-textile printing without steaming or washing.

Features:

  • A new recirculating ink system for superior reliability and minimum maintenance at start up and during production
  • Several printing modes to ensure maximum flexibility in terms of design capability
  • New, real-time image processing that eliminates time spent in image pre-calculations
  • A user friendly, intuitive interface
  • A more-efficient polymerisation process that takes place as printed textile goes through the printer’s on-board dryer.
03.06.2021

EFI Reggiani celebrates 75 years in the textile world

This year, EFI™ Reggiani celebrates 75 years of heritage, innovation and glamour in the textile world. As part of its anniversary celebration, the textile technology innovator is revealing the imminent launch of three new digital textile printers.

Reggiani Tessile – which was one of the largest fabric manufacturing companies in Italy – created the company to meet its needs in machinery development. Then known as Reggiani Macchine, the company grew tremendously over five decades thanks to continuous product innovation and close customer relationships.

From the creation of its first traditional printer to its latest technological innovations, EFI Reggiani’s tradition and dedication to its products have contributed to the global transformation of the textile market. EFI Reggiani solutions are used in high-quality, highly productive operations in all of the world’s major textile manufacturing centres. New EFI Reggiani innovations also help facilitate the spread and localisation of industrial textile manufacturing closer to end users in new geographic markets.

This year, EFI™ Reggiani celebrates 75 years of heritage, innovation and glamour in the textile world. As part of its anniversary celebration, the textile technology innovator is revealing the imminent launch of three new digital textile printers.

Reggiani Tessile – which was one of the largest fabric manufacturing companies in Italy – created the company to meet its needs in machinery development. Then known as Reggiani Macchine, the company grew tremendously over five decades thanks to continuous product innovation and close customer relationships.

From the creation of its first traditional printer to its latest technological innovations, EFI Reggiani’s tradition and dedication to its products have contributed to the global transformation of the textile market. EFI Reggiani solutions are used in high-quality, highly productive operations in all of the world’s major textile manufacturing centres. New EFI Reggiani innovations also help facilitate the spread and localisation of industrial textile manufacturing closer to end users in new geographic markets.

In the growing industrial, entry-level segment of the market, EFI Reggiani is strengthening its multi-pass offering by introducing two new scanning machines, which will help facilitate customers’ needs to manufacture closer to the end consumer. The pair of scanning printers EFI Reggiani is bringing to market in 2021 will enable new customers to take their first steps in industrial textile digital printing.

Source:

EFI

11.01.2021

EFI Reggiani: Neue Perspektiven für den russischen Textilmarkt

Gemeinsam mit seinem Partner Nissa Distribution™ hat EFI™ Reggiani in Russland drei neue Verkaufsverträge für die Lieferung und Installation von industriellen Lösungen für den industriellen Textildirekt- und Sublimationsdruck abgeschlossen. Durch diese Verkäufe werden drei führende russische Textilfabrikanten, D-TEX Digital Textile Printing, MIRtex und Sima-Land, über die produktiven und nachhaltigen digitalen Lösungen von EFI Reggiani verfügen.

EFI Reggiani ist seit langem in Russland präsent und beliefert wichtige Kunden mit Digitaldruckern mit wasserbasierten Tinten, analogen Druckern sowie Vor- und Nachbehandlungsgeräten. EFI Reggiani hat seine Präsenz mit Nissa Distribution, einem wertvollen lokalen Partner, weiter ausgebaut.

Größere Nachhaltigkeit und höhere Produktivität für den russischen Markt
EFI Reggiani entwickelt, fertigt, verkauft, installiert und wartet weltweit fortschrittliche Lösungen für industrielle Textilmaschinen und arbeitet dabei eng mit Partnern wie Nissa zusammen.

Gemeinsam mit seinem Partner Nissa Distribution™ hat EFI™ Reggiani in Russland drei neue Verkaufsverträge für die Lieferung und Installation von industriellen Lösungen für den industriellen Textildirekt- und Sublimationsdruck abgeschlossen. Durch diese Verkäufe werden drei führende russische Textilfabrikanten, D-TEX Digital Textile Printing, MIRtex und Sima-Land, über die produktiven und nachhaltigen digitalen Lösungen von EFI Reggiani verfügen.

EFI Reggiani ist seit langem in Russland präsent und beliefert wichtige Kunden mit Digitaldruckern mit wasserbasierten Tinten, analogen Druckern sowie Vor- und Nachbehandlungsgeräten. EFI Reggiani hat seine Präsenz mit Nissa Distribution, einem wertvollen lokalen Partner, weiter ausgebaut.

Größere Nachhaltigkeit und höhere Produktivität für den russischen Markt
EFI Reggiani entwickelt, fertigt, verkauft, installiert und wartet weltweit fortschrittliche Lösungen für industrielle Textilmaschinen und arbeitet dabei eng mit Partnern wie Nissa zusammen.

Seit 2018 sind Nissa Distribution und deren Tochtergesellschaft Nissa Stensart™ Vertriebshändler von EFI Reggiani Produkten in Russland. Das Produktportfolio von Stensart umfasst die größte Bandbreite an Geräten für die Vorbereitung, den Druck und die Veredelung von Textilien und erfüllt die anspruchsvollen Anforderungen für eine erfolgreiche Produktion in den verschiedenen Textilmarktsegmenten.

Die jüngsten Ergebnisse der Zusammenarbeit von EFI Reggiani, Nissa Distribution und Nissa Stensart sind der Abschluss von drei Verträgen für die digitalen Textildrucker EFI Reggiani POWER und EFI Reggiani NEXT.
 
Neue POWER Installationen
Die ersten EFI Reggiani Digitaldrucker POWER 180 und POWER 240 in Russland wurden kürzlich an D-TEXDigital Textile Printing in Stupino in der Oblast Moskau und an MIRtex in Furnmanov, Russland, verkauft. Die Unternehmen, die Produkte aus Naturfasern und Strickwaren bedrucken und herstellen, gehören zu den größten umfassenden Textilherstellern, die Russland und die Gemeinschaft Unabhängiger Staaten (GUS) beliefern.

Die EFI Reggiani POWER 180 und POWER 240 sind industrielle Digitaldruckmaschinen für den Direktdruck auf Stoff, Maschenware und Textilien mit einer Breite von 1,8 Metern bzw. 2,4 Metern.

NEXT: die digitale Innovation von Sima-Land
Der erste EFI Reggiani NEXT 340 Drucker Russlands wird bei einem der größten Textilgroßhändler des Landes, Sima-Land, installiert. Das in Jekaterinburg ansässige Unternehmen bietet über eine Million verschiedene Produkte an, darunter Deko-Textilien für Heim und Büro sowie Herren-, Damen- und Kinderbekleidung.

Beim EFI Reggiani NEXT 340 handelt es sich um eine 3,4 Meter breite, bandlose, industrielle Digitaldruckmaschine für den Direkt- und Sublimationsdruck.

efi (c) EFI
07.10.2020

EFI Reggiani to participate in Innovate Textile & Apparel Virtual Trade Show

EFI™ Reggiani, a leading developer and manufacturer of cutting-edge technologies and sustainable solutions for the textile industry, will take part in the World Textile Information Network (WTiN) Innovate Textile & Apparel Virtual Trade Show from October 15 to 30.

Like many industry groups around the world that have begun re-thinking tradeshows out of concern for public health, WTiN launched the tradeshow as an online event designed to reconnect innovation in the value chain.

EFI Reggiani textile solutions to be featured at the event include a complete range of digital and analogue printers and pre- and post-treatment lines. Plus, the event’s display of EFI Reggiani technologies will also feature one of the industry’s broadest line-ups of high-end, superior-quality textile inks, together with short, sustainable processes – such as pigment and direct sublimation printing – as well as greener, eco-friendly denim dyeing solutions.

EFI™ Reggiani, a leading developer and manufacturer of cutting-edge technologies and sustainable solutions for the textile industry, will take part in the World Textile Information Network (WTiN) Innovate Textile & Apparel Virtual Trade Show from October 15 to 30.

Like many industry groups around the world that have begun re-thinking tradeshows out of concern for public health, WTiN launched the tradeshow as an online event designed to reconnect innovation in the value chain.

EFI Reggiani textile solutions to be featured at the event include a complete range of digital and analogue printers and pre- and post-treatment lines. Plus, the event’s display of EFI Reggiani technologies will also feature one of the industry’s broadest line-ups of high-end, superior-quality textile inks, together with short, sustainable processes – such as pigment and direct sublimation printing – as well as greener, eco-friendly denim dyeing solutions.

During the Innovate tradeshow, EFI Reggiani will also take part in the 20 October “Clash of the Titans” roundtable chaired by WTiN, which will bring together industry leaders to debate the future of textile inkjet printing.