From the Sector

Reset
103 results
12.01.2021

Kelheim Fibres first viscose manufacturer worldwide with environmental management system validated to EMAS

  • The Bavarian Kelheim Fibres GmbH has become the first viscose fibre manufacturer worldwide to receive EMAS certification.

“Our aspiration is that our fibres offer an eco-friendly and high-performance alternative to synthetic materials”, says Craig Barker, CEO at Kelheim Fibres. “So, it’s not enough that our fibres are made from renewable resources and that they are fully biodegradable – our environmental awareness must include the whole production process and all that goes with it if we want to safeguard our credibility.

The EMAS certification proves that we take this responsibility seriously.” EMAS stands for “Eco Management and Audit Scheme” and is a standardised eco management certification system developed by the European Union. EMAS includes the globally applicable ISO 14001 standard and goes beyond its requirements by demanding more transparency and continuous improvement: Certified companies report in their annual EMAS Environmental Statement on their environmental goals and their progress in meeting them.

  • The Bavarian Kelheim Fibres GmbH has become the first viscose fibre manufacturer worldwide to receive EMAS certification.

“Our aspiration is that our fibres offer an eco-friendly and high-performance alternative to synthetic materials”, says Craig Barker, CEO at Kelheim Fibres. “So, it’s not enough that our fibres are made from renewable resources and that they are fully biodegradable – our environmental awareness must include the whole production process and all that goes with it if we want to safeguard our credibility.

The EMAS certification proves that we take this responsibility seriously.” EMAS stands for “Eco Management and Audit Scheme” and is a standardised eco management certification system developed by the European Union. EMAS includes the globally applicable ISO 14001 standard and goes beyond its requirements by demanding more transparency and continuous improvement: Certified companies report in their annual EMAS Environmental Statement on their environmental goals and their progress in meeting them.

During the audit preceding the certification, the independent environmental auditor thoroughly investigated all departments of the company, from the production itself to the company canteen. He found no non-conformances and was impressed by the competence and the high sense of responsibility among Kelheim’s employees. In contrast to the EU Ecolabel and similar certifications, EMAS does not apply to individual products or services, but certifies the complete environmental performance of the company. This benefits not only the protection of the environment and climate, but also the improvement of a company’s ecoefficiency.

Craig Barker: “An efficient environmental management system ensures that economy and ecology go hand in hand – that gives us a decisive competitive edge.”

Source:

Kelheim Fibres GmbH

Advanced Monforts automation is the key for Hamle (c) Monforts
07.12.2020

Advanced Monforts automation is the key for Hamle

  • Leading Turkish textile printing company Hamle has installed a new Monforts Thermex dyeing range as part of its ongoing strategy of continuous investment.

“Investment in new technology and capacity expansions are very important to us, in order to stay ahead in terms of sustainable, high quality production,” says general manager Gürkan Uzuner. “We carefully assess the benefits of each advanced new technology in order to thrive in a sector that is constantly changing.

“The Zara Group is a major European customer for us, along with well-known Turkish brands such as LCW and De-Facto, and it’s no accident that Çorlu, due to its proximity to Istanbul and the ease of supplying to Europe, has become the epicentre of Turkish textile production. The quality of textiles coming from the region is now very well proven.”

Integration

  • Leading Turkish textile printing company Hamle has installed a new Monforts Thermex dyeing range as part of its ongoing strategy of continuous investment.

“Investment in new technology and capacity expansions are very important to us, in order to stay ahead in terms of sustainable, high quality production,” says general manager Gürkan Uzuner. “We carefully assess the benefits of each advanced new technology in order to thrive in a sector that is constantly changing.

“The Zara Group is a major European customer for us, along with well-known Turkish brands such as LCW and De-Facto, and it’s no accident that Çorlu, due to its proximity to Istanbul and the ease of supplying to Europe, has become the epicentre of Turkish textile production. The quality of textiles coming from the region is now very well proven.”

Integration

Hamle’s plant in Çorlu already houses a Monforts ten-chamber Montex stenter and two Monforts sanforizing ranges on which the company carries out an extensive range of finishing processes. The new Thermex range further integrates a number of processes on technology all from a single supplier. The Thermex universal hotflue for continuous dyeing, condensing and thermosoling achieves unrivalled reliability even at maximum fabric speeds, for exceptional cost-effectiveness when dyeing both large and small batches of woven fabrics. The new range installed for Hamle benefits from the Econtrol® process* for reactive dyestuffs. This is quick and economical one-pass pad-dry and wash off process, with drying in the hot flue at 120-130°C and controlled humidity (25-30% by volume) to obtain fixation in 2-3 minutes.
Econtrol® ensures excellent reproducibility of all colours, improved dye penetration on difficult fabrics and no risk of the browning of cotton or other cellulose fibres due to the low fixation temperature.

As such, it is the ideal process for fast change technology and operational savings. “The new Thermex range has some very advanced automation features which ensure our machine operators have full control over the entire system,” Mr Uzuner concludes. “ As the Monforts representative in Turkey, Neotek has been our solution partner in the installation and commissioning and has been with us every step of the way.
.
* Econtrol® is a registered mark of DyStar Colours Distribution GmbH, Germany.

 

Source:

AWOL Media for Monforts

COBRA provides high-quality mass production for ARE Tahiti’s new composite canoes (c) COBRA
23.11.2020

COBRA provides high-quality mass production for ARE Tahiti’s new composite canoes

Cobra International, Chonburi, Thailand: COBRA International, one of the world’s largest OEM manufacturers of composite goods for Water Sports, Automotive, Marine and Civil Engineering, is pleased to confirm the shipment of its first 36 composite canoes to ARE Tahiti.

COBRA has collaborated with leading outrigger canoe brand ARE Tahiti to mass produce its new OC-1 canoe, ‘Mana’. Designed by former professional windsurfer Baptiste Gossein  (JP Australia and Neil Pryde), ‘Mana’ features a closed deck on which the paddler sits on top of the hull. Available in two models; a hybrid version weighing 12kg, using an 80:20 mix of E-glass and carbon fibre reinforcement fabrics, and the PRO model – a weight optimized, ultra-light, full carbon version that weighs as little as 9kg.   

“We required the best in composite construction for both models, a stunning final finish and a build rate that could keep up with our growing order book”, comments Baptiste Gossein.

Cobra International, Chonburi, Thailand: COBRA International, one of the world’s largest OEM manufacturers of composite goods for Water Sports, Automotive, Marine and Civil Engineering, is pleased to confirm the shipment of its first 36 composite canoes to ARE Tahiti.

COBRA has collaborated with leading outrigger canoe brand ARE Tahiti to mass produce its new OC-1 canoe, ‘Mana’. Designed by former professional windsurfer Baptiste Gossein  (JP Australia and Neil Pryde), ‘Mana’ features a closed deck on which the paddler sits on top of the hull. Available in two models; a hybrid version weighing 12kg, using an 80:20 mix of E-glass and carbon fibre reinforcement fabrics, and the PRO model – a weight optimized, ultra-light, full carbon version that weighs as little as 9kg.   

“We required the best in composite construction for both models, a stunning final finish and a build rate that could keep up with our growing order book”, comments Baptiste Gossein.

As with all of COBRA’s watersports’ projects, a perfect master model formed the basis of the mass production tooling and two sets of composite hull tooling were taken from the master plug allowing a build rate of up to 50 OC-1 canoes per month.

For the lay-up and construction process, COBRA’s high-performance PVC foam sandwich windsurf board construction provided a solid starting point.  Having selected vacuum consolidated epoxy wet layup for the mix of woven and stitched biaxial reinforcements, COBRA was able to build down to the customer’s weight target with the absolute minimum of waste and additional consumables.  Top and bottom sections of the hull were moulded separately then bonded together, with the smaller outrigger hull – known as the ‘ama’ – produced in the same way.  Prepreg carbon fibre and in-house split mould tooling was also used for the two ‘Iakos’ - the two cross beams that join the ama to the main hull. 

An in-mould applied finish coat was then used for the hybrid OC-1 while the PRO carbon fibre model benefits from COBRA’s ultra-light paint system.

“COBRA is able to provide mass production capability and rapid new model turnaround, as well as delivering consistently high quality. We are delighted with the first COBRA built OC-1s and have received exceptionally positive feedback from both customers and racers” comments Baptiste Gossein.

The next ARE project to enter mass production at COBRA will be the V-1 canoe. Similar to the OC-1 but an open boat that the paddler sits inside, the V-1 will have no rudder or steering system, requiring more finesse to manage underway.

“The OC-1 outrigger canoe is a superb example of our customer focused approach to production process development.  By working closely with Baptiste and the ARE team, COBRA is able to provide mass production capability and a rapid new model turnaround, as well as delivering consistently high quality.  This is a sector in which we expect to see significant expansion over the next few years”, comments Danu Chotikapanich, CEO, COBRA International.

Relanit 3.2 HS (c) Mayer & Cie
17.11.2020

Mayer & Cie. extends status in Turkey

In pandemic year 2020 circular knitting machine manufacturer Mayer & Cie. (MCT) has further improved its leading position in Turkey. So the country continues to be one of the company’s strongest and most consistent sales markets. Even in difficult years, the manufacturer and its longstanding Turkish representative Mayer Mümessillik have achieved positive results. The reasons for this year’s success, as Mayer & Cie. sees it, are the transfer of production to locations close to Europe, Turkey’s state-of-theart machinery and the increase in demand for comfortable clothing that is suitable as home office wear.

Turkish market is a growth market despite corona setback
“Compared to 2019, we anticipate a growth in the Turkish market even though the corona situation was a serious setback in the second quarter of 2020,” says Stefan Bühler, Mayer & Cie.’s regional sales manager for Turkey.

In pandemic year 2020 circular knitting machine manufacturer Mayer & Cie. (MCT) has further improved its leading position in Turkey. So the country continues to be one of the company’s strongest and most consistent sales markets. Even in difficult years, the manufacturer and its longstanding Turkish representative Mayer Mümessillik have achieved positive results. The reasons for this year’s success, as Mayer & Cie. sees it, are the transfer of production to locations close to Europe, Turkey’s state-of-theart machinery and the increase in demand for comfortable clothing that is suitable as home office wear.

Turkish market is a growth market despite corona setback
“Compared to 2019, we anticipate a growth in the Turkish market even though the corona situation was a serious setback in the second quarter of 2020,” says Stefan Bühler, Mayer & Cie.’s regional sales manager for Turkey.

Mayer & Cie. got off to a strong start on the Bosporus in the first quarter of 2020 with additional positive effects until mid-March. This was due to a desire for production locations close to Europe. In the second quarter, during the lockdown, demand largely ground to a halt. Government measures helped to cushion the downturn. Says Ahmet M. Öğretmen, general manager of MCT’s Turkish sales partner Mayer Mümessillik: “In the second quarter, GDP was down by about 10 percent, so we got off lightly.”

Since July 2020, orders for Mayer & Cie. circular knitting machines have bounced back again. Ahmet M. Öğretmen sees an interplay of reasons for this recovery. The main reason, he says, is the low exchange rate of the Turkish lira, which has boosted exports of ready-made textiles. The Turkish daily Hürriyet reports, with reference to the Turkish state news agency, 11 percent year-on-year growth in August 2020. The most important export markets, the newspaper says, are Germany, the UK and Spain. Between them, they account for around half of exports totalling € 1.27 billion.* “This demand must be fulfilled,” Öğretmen says. “That leads to investment in machinery by manufacturers.”

Relanit is synonymous with single jersey
The machines of choice for Turkish knitwear manufacturers are regularly Mayer & Cie. machines. The long-established German firm’s share of the Turkish market is substantially higher than in other markets. The manufacturer’s position is particularly strong in the market for plain single jersey fabrics, with the Relanit 3.2 HS being the machine of choice. It achieves an extraordinarily high level of productivity, especially in processing elastomer yarns. It also handles a wide range of yarns reliably.

“Interlock is Mayer & Cie.”
Mayer & Cie. is one of the leader in the second major circular knitting discipline, rib and interlock fabrics. The machines used for double jersey fabrics are the OV 3.2 QCe, the D4 2.2 II and the D4 3.2 II. The OV 3.2 QCe knits interlock, 8-lock structures, spacers and fine gauge with 3.2 systems. The D4 2.2 II is another stalwart for rib, 8-lock and interlock. The 8-lock D4 3.2 II is the machine of choice for firms that want to manufacture structures such as Piqué, Punto di Roma or Thermal in addition to interlock.

The MBF 3.2 is another top seller in Turkey. A three-thread fleece machine, it knits fabrics for sportsand leisurewear such as hoodies and is very much in keeping with the trend in home office year 2020. “Comfortable clothing is circular knitted,” says Ahmet M. Öğretmen, “and we benefit from that of course.”

One of the world’s most state-of-the-art machine parks are in Turkey
Another advantage is the modernity of the Turkish machine park, which is doubly attractive in view of Turkey’s weak currency. Says Mayer Mümessillik general manager Öğretmen: “In the past 10 to 20 years there has been very heavy investment in high-quality machines. As a consequence we have the world’s youngest and most up-to-date production facilities.” Combined with geographical proximity to the main export markets in Europe that should prove a growth driver in the years ahead – and keep demand for Mayer & Cie. machines brisk and high.

 

*More informationen here.

Source:

Mayer & Cie GmbH & Co. KG

04.11.2020

DyStar Exhibits at China Interdye 2020

Shanghai, China - DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation will exhibit in the 20th China International Dyestuff Industry, Pigments and Textile Chemicals Exhibition - China Interdye 2020. DyStar will showcase the latest product innovations at Hall 1 booth #A330.

The three-day annual event will be taking place at Shanghai World Expo Exhibition & Convention Center (SWEECC) and opens doors on 8th November. DyStar’s managers will be onsite to support visitors from production houses, manufacturers, and Brands and Retailers with essential information, helping them to make meaningful and notable decisions based on tangible benefits such as reduction of water, waste and energy consumption, thereby improving their end-products and quality.

Shanghai, China - DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation will exhibit in the 20th China International Dyestuff Industry, Pigments and Textile Chemicals Exhibition - China Interdye 2020. DyStar will showcase the latest product innovations at Hall 1 booth #A330.

The three-day annual event will be taking place at Shanghai World Expo Exhibition & Convention Center (SWEECC) and opens doors on 8th November. DyStar’s managers will be onsite to support visitors from production houses, manufacturers, and Brands and Retailers with essential information, helping them to make meaningful and notable decisions based on tangible benefits such as reduction of water, waste and energy consumption, thereby improving their end-products and quality.

DyStar’s sustainable solutions can further optimize productions, processes, and reduce costs. Some of these products and concepts are highlighted at the event as follows:
•    Recent launch of Cadira® Polyamide and Cadira Polyester/Cellulosic Exhaust
•    Total collection of eleven Cadira® modules
•    High Fast Dianix® XF2 Range
•    Sera® Wash M-VFN
•    Levafix® CA and Remazol® SAM offer

Despite a year full of global economic challenges, with the supply chain and stakeholders heavily strained by the global pandemic, DyStar is determined to support the industry and its customers. They can benefit from our legacy of innovations and product offerings, so that they can continue to drive sustainability and growth in their respective domains, contributing in a responsible and yet sustainable manner for a cleaner future.

Erstklassige Wischtücher mit Phantom-Technologie (c) Oerlikon Manmade Fibers
Phantom technology enables greater freedom for formulating continuous and discrete fibers allows for more flexible and absorbent structures and highly textured materials.
22.10.2020

First class wipes with Phantom technology

Neumünster – Success is built by connecting the right people with the right product. In a global marketplace, this means collaboration is just as important as competition. Companies need to focus on their strengths, while finding practical ways to innovate and expand upon their capabilities.

An exclusive license from Procter & Gamble offers the best for nonwovens

In order to do so, working together often makes the most sense. This is what motivated Procter & Gamble and Oerlikon Nonwoven – Teknoweb Materials to agree on an exclusive license agreement to market and sell the Phantom platform worldwide.

Neumünster – Success is built by connecting the right people with the right product. In a global marketplace, this means collaboration is just as important as competition. Companies need to focus on their strengths, while finding practical ways to innovate and expand upon their capabilities.

An exclusive license from Procter & Gamble offers the best for nonwovens

In order to do so, working together often makes the most sense. This is what motivated Procter & Gamble and Oerlikon Nonwoven – Teknoweb Materials to agree on an exclusive license agreement to market and sell the Phantom platform worldwide.

The patented process for hybrid nonwovens combines the best of both airlaid and spunmelt technologies to deliver new, flexible ways of creating wet and dry wipes. Phantom technology offers additional benefits by reducing resources and cost, while increasing overall performance. The exclusive license gives Oerlikon Nonwoven – Teknoweb Materials distribute this technology worldwide. In addition, Oerlikon Nonwoven – Teknoweb Materials have further refined the process into their own Levra technology – an entry-level option which offers tailored production volumes with lower investment costs but is still suitable to be upgraded to the premium Phantom model in the future.

Quality products that cost less

Essentially, Phantom technology was developed to produce hybrid substrates. The spunmelt and airlaid processes are merged into one step to combine cellulose fibers, long fibers such as cotton, or even powders with polymer fibers in unprecedented ways. This technology has clear advantages in terms of resources, performance, and cost compared to the previous processes on the market. By removing hydroentanglement, it is no longer necessary to dry the material. Adjusting the process can optimize relevant product characteristics such as softness, strength, dirt absorption, and liquid absorption. In the end, this even increases the quality of the product itself.

The greater freedom for formulating continuous and discrete fibers allows for more flexible and absorbent structures and highly textured materials. Wipes feel softer to the touch while providing more protection for the hands. Up to 90% of the material can consist of pulp fibers, although natural alternatives like cotton or synthetic fibers can be added to the mix.

Phantom technology has not only found a practical application in a variety of wipes – such as hygiene wipes, anti-bacterial wipes, surgical wipes, or industrial wipes – but also in absorbent cores, for instance indiapers or fempro products. With so many applications, Oerlikon Nonwoven – Teknoweb Materials are fully prepared to deliver Procter & Gamble’s innovative Phantom technology to the global nonwovens market.

Source:

Oerlikon Manmade Fibers

Moti Fabrics (Pvt) Ltd. Moves to Digital Production with Mimaki Tiger (c) Mimaki
The Tiger-1800B MkII, Mimaki’s flagship industrial volume textile printer
22.10.2020

Moti Fabrics (Pvt) Ltd. Moves to Digital Production with Mimaki Tiger

  •   Mimaki Tiger-1800B MkII Printers for Faster, High-Quality Textile Printing

Amsterdam - Mimaki Europe, a leading manufacturer of inkjet printers and cutting systems, announces today that Pakistani textile company, Moti Fabrics (Pvt) Ltd., is leveraging multiple Mimaki Tiger industrial textile printing units to take its business to the next level. As a result of on the outstanding performance and process optimisation delivered by the Mimaki digital printing equipment, the company has been able to adapt to changes in the textile industry and is now projected to reinforce its market position and expand its capabilities in high-quality textile production.

  •   Mimaki Tiger-1800B MkII Printers for Faster, High-Quality Textile Printing

Amsterdam - Mimaki Europe, a leading manufacturer of inkjet printers and cutting systems, announces today that Pakistani textile company, Moti Fabrics (Pvt) Ltd., is leveraging multiple Mimaki Tiger industrial textile printing units to take its business to the next level. As a result of on the outstanding performance and process optimisation delivered by the Mimaki digital printing equipment, the company has been able to adapt to changes in the textile industry and is now projected to reinforce its market position and expand its capabilities in high-quality textile production.

Headquartered in Faisalabad, Punjab province – the second largest textile hub in Pakistan –, Moti Fabrics (Pvt) Ltd. mainly serves the high fashion industry and uses its cutting-edge technology to print about 100,000 metres daily. Faced with recent challenges in the global textile market, management at Moti Fabrics (Pvt) Ltd. embarked on innovating the company’s business model, shifting from conventional to digital printing. In doing so, the company invested in Mimaki’s advanced industrial textile technology and installed three Mimaki Tiger-1800B MkII units. “We were – and still are – experiencing a massive transformation in the printing segment, with brands demanding high quality products delivered within short deadlines. This change in our customers’ requirements urged us to move to digital printing,” says Muhammad Asif, CEO at Moti Fabrics (Pvt) Ltd. “Our choice has already proved sound as our brand-new Tiger-1800B MkII printing systems have enabled us to cope with the high standards of the fashion industry in terms of both quality and delivery times. In addition, we have been able to gradually enhance our production processes in a cost-effective way.”

The Tiger-1800B MkII is Mimaki’s flagship industrial volume textile printer, available either in dye sublimation configuration for transfer printing or with reactive ink for direct-to-textile printing. Of the three Mimaki Tiger-1800B MkII solutions operating at Moti Fabrics (Pvt) Ltd., two are equipped with reactive inks, enabling the company to directly print onto natural fibres such as cotton and linen, as well as onto manufactured cellulose fibres, including rayon and nylon. The third Mimaki Tiger-1800B MkII features sublimation inks serves the ever-growing printed polyester market, allowing the company to strategically diversify its product portfolio.

“There are several features of the Tiger-1800B MkII that benefit our production and our business at large. The MAPS (Mimaki Advanced Pass System), just to name one, prevents banding and colour-shifting to deliver a higher standard of quality, while the NRS (Nozzle Recovery System) provides uninterrupted production, minimising downtime and ensuring superior results. The sticky belt system together with the large-size ink tanks (with a capacity of 10kg) and the high-performance software RIP TxLink3 are some of the other features that make these printers efficient, user-friendly and reliable,” says Asif.

Asif concludes, “Looking at the future, our aim is to set up a print department featuring only Mimaki’s technologies. We are already considering the next steps to make this possible, knowing that we can count on the support of Signtrade, Mimaki’s dealer in the region and our trustworthy partner.”

Moti Fabrics (Pvt) Ltd. was founded in 1992 by Muhammad Asif’s father Haji Muhammad Yousaf and his partner Haji Rasheed Ahmad. Established as a dyeing company, Moti Fabrics (Pvt) Ltd. was able to gradually diversify the business over the years to become an advanced textile printing specialist. Today, the company is an established provider to the high fashion industry in Pakistan and on an international level.

“The story of Moti Fabrics is incredibly inspiring. Belonging to a region with such rooted textile printing heritage, the company has been able to embrace a new, challenging business model in order to stay at pace with the changing demand from the textile industry and has succeeded,” comments Ronald van den Broek, General Sales Manager at Mimaki Europe. “Customers like Moti Fabrics make us proud as they demonstrate how our advanced Mimaki Tiger industrial textile series can be the enabling technology for those textile companies planning the shift from conventional to digital printing.”

World Cotton Day on 7 October Highlights the Importance of Cotton for Development Policy (c) pixabay
Cotton
07.10.2020

October, 7th: World Cotton Day

  • World Cotton Day on 7 October Highlights the Importance of Cotton for Development Policy

Bremen - Stemming from a 2019 initiative of the African Cotton-4 countries Benin, Burkina Faso, Chad and Mali, World Cotton Day will take place this year on 7 October. The event is organised by the Geneva-based World Trade Organisation (WTO) and is supported by the Food and Agriculture Organisation of the United Nations (FAO), the United Nations Conference on Trade and Development (UNCTAD), the International Trade Centre (ITC) and the International Cotton Secretariat (ICAC). The Bremen Cotton Exchange is also involved.

“Cotton is often underestimated because it is so natural. Behind it are millions of people, for example many farmers, field workers, employees in ginning factories, logistics providers and traders. We want to honour their achievements,” said the President of the Bremen Cotton Exchange, Stephanie Silber.

  • World Cotton Day on 7 October Highlights the Importance of Cotton for Development Policy

Bremen - Stemming from a 2019 initiative of the African Cotton-4 countries Benin, Burkina Faso, Chad and Mali, World Cotton Day will take place this year on 7 October. The event is organised by the Geneva-based World Trade Organisation (WTO) and is supported by the Food and Agriculture Organisation of the United Nations (FAO), the United Nations Conference on Trade and Development (UNCTAD), the International Trade Centre (ITC) and the International Cotton Secretariat (ICAC). The Bremen Cotton Exchange is also involved.

“Cotton is often underestimated because it is so natural. Behind it are millions of people, for example many farmers, field workers, employees in ginning factories, logistics providers and traders. We want to honour their achievements,” said the President of the Bremen Cotton Exchange, Stephanie Silber.

According to the WTO, the aim of World Cotton Day is to highlight the global economic importance of cotton and to raise awareness of the raw material by recognising the work of everyone involved in its cultivation, processing and trade. At the same time, within the framework of international cooperation, it is hoped that supporters and investors can be found to aid with technological and economic progress within the cotton value chain.

This time, the entire world cotton community will be involved in World Cotton Day on Wednesday, 7 October 2020. A wide variety of campaigns and events are taking place everywhere to draw attention to the importance of cotton and its possible uses.

Cotton is one of the most relevant agricultural raw materials in the world. Around 26 million tonnes of it are harvested annually. Approximately 150 million people in almost 80 countries around the world live from the cultivation of the natural fibre. A large number of these live in developing countries, where cotton cultivation is of particular importance as a cash crop.

Cotton is known as an agricultural product that is turned into a textile. The raw material is indispensable in fashion and clothing – and has been for thousands of years. But the use of cotton now goes far beyond textiles. For example, cosmetic products such as hand creams and hair shampoo are made from the oil of cotton seeds. The raw material is also used in the manufacture of banknotes, furniture and technical textiles, as well as in medical technology.

Against the background of the current discussion on sustainability and sustainable consumption, the role of natural fibres is becoming even more important. Cotton is biodegradable and a renewable resource. It can be grown again and again in agriculture through cultivation in crop rotation. This secures incomes and enables efficient value creation within the global production and processing chain.

The Bremen Cotton Exchange will actively support World Cotton Day with cross-media coverage. In addition, in time for World Cotton Day, three thematically different, emotionally appealing short films about cotton will be launched. They are aimed at consumers as customers of the textile and clothing trade and provide information about the benefits and properties of cotton and answer questions about its sustainability. In keeping with the times, they will be published via virtual media.

Monforts texCoat coating system (c) Monforts / AWOL Media
06.10.2020

Monforts at Innovate Textile & Apparel (ITA) 2020

During the Innovate Textile & Apparel (ITA) virtual textile machinery show which will run from October 15th-30th 2020, Monforts will be emphasising its leadership position in three key fields – advanced coating, denim finishing and fabric sanforizing.

With its multi-head capability, the latest Monforts texCoat coating system provides flexibility with an unprecedented range of options and a wide range of modules available.

Refinements
“Since we acquired the coating technology that our systems are based on we have made a lot of refinements and all of them are reflected in higher coating accuracy and the resulting quality of the treated fabrics,” says Monforts Head of Technical Textiles, Jürgen Hanel.
“Our systems have the shortest fabric path from the coating unit into the stenter and we have all variations of coating application systems too – and all of these options are available in wider widths, with the engineering and manufacturing from a single source here in Europe.”

During the Innovate Textile & Apparel (ITA) virtual textile machinery show which will run from October 15th-30th 2020, Monforts will be emphasising its leadership position in three key fields – advanced coating, denim finishing and fabric sanforizing.

With its multi-head capability, the latest Monforts texCoat coating system provides flexibility with an unprecedented range of options and a wide range of modules available.

Refinements
“Since we acquired the coating technology that our systems are based on we have made a lot of refinements and all of them are reflected in higher coating accuracy and the resulting quality of the treated fabrics,” says Monforts Head of Technical Textiles, Jürgen Hanel.
“Our systems have the shortest fabric path from the coating unit into the stenter and we have all variations of coating application systems too – and all of these options are available in wider widths, with the engineering and manufacturing from a single source here in Europe.”

CYD
Denim finishing is meanwhile a field in which Monforts has an undisputed lead and it has been working closely with its many partners in the key denim manufacturing countries of Bangladesh, Brazil, China, India, Mexico Pakistan and Turkey to develop advanced solutions. The latest of these is the CYD yarn dyeing system.
“CYD is based on the proven Econtrol® dyeing system for fabrics*,” explains Monforts Head of Denim Hans Wroblowski. “It integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity. The CYD system has been developed in response to a very strong market demand.”

Pre-shrinking
Monforts has also recently delivered a significant number of its latest Monfortex sanforizing lines to customers around the world.
Sanforizing is vital to final fabric quality, pre-shrinking it by compressing prior to washing, to limit any residual or further shrinkage in a made-up finished garment to less than 1%, for perfect comfort and fit over an extended lifetime.

As with industry-leading Montex stenters, Monfortex lines benefit from the latest Qualitex 800 control system which allows all parameters to be easily automated via the 24-inch colour touchscreen, including production speed, control of all fabric feed devices, rotation spray or steaming cylinder options, the width of the stretching field and the rubber belt pressure. Up to 10,000 separate process parameter records can be generated and stored by the data manager.

 

*Econtrol® is a registered mark of DyStar Colours Distribution GmbH, Germany.

Kooperation AMAC und FINNESTER (c) Finnester
Finnester’s innovative fire protection coatings in action
21.09.2020

Cooperation AMAC and FINNESTER

  • Finnish coating and gelcoat manufacturer Finnester strengthens its activities in the D-A-CH region with AMAC

As of September 15th 2020, the Finland-based coating and gelcoat manufacturer Finnester Coatings Oy strengthens its activities in German speaking countries, the so-called D- A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC.

Finnester is a pioneer in developing high-quality coatings and gelcoat for both urface spread as well as flame and thermal insulation of composite solutions in different fields of industries. Their portfolio comprises products based on Polyester coatings for fire and thermal protection as well as ceramifying polymers like HybridRED, compliant with the requirements of the standards e.g. EN45545-2. In
order to develop new business opportunities in the D-A-CH region for the endmarkets building and infrastructure, transportation, marine, industrial and electrical industries, Finnester is cooperating with AMAC to accelerate the process of locating suitable partnerships.

  • Finnish coating and gelcoat manufacturer Finnester strengthens its activities in the D-A-CH region with AMAC

As of September 15th 2020, the Finland-based coating and gelcoat manufacturer Finnester Coatings Oy strengthens its activities in German speaking countries, the so-called D- A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC.

Finnester is a pioneer in developing high-quality coatings and gelcoat for both urface spread as well as flame and thermal insulation of composite solutions in different fields of industries. Their portfolio comprises products based on Polyester coatings for fire and thermal protection as well as ceramifying polymers like HybridRED, compliant with the requirements of the standards e.g. EN45545-2. In
order to develop new business opportunities in the D-A-CH region for the endmarkets building and infrastructure, transportation, marine, industrial and electrical industries, Finnester is cooperating with AMAC to accelerate the process of locating suitable partnerships.

Ari Hokkanen, CEO of Finnester: “Finnester has developed unique high-quality coatings. The cooperation with AMAC will accelerate our growth ambitions and supports us in finding new business opportunities. We are happy to benefit from AMAC and Dr. Effing’s long-term experience as a pioneer in the composites industry and his high-quality network along the entire value chain.” Dr. Effing, CEO of AMAC GmbH confirms: “Fire-retardant coatings are very important to the composites industry in order to be successful especially in rail, fast ferry and building & infrastructure applications with their tough fire standards. The DACH region represents more than 30 % of the European market and is the key target for Finnester. I am looking forward to supporting Finnester with their unique offerings and connecting them with key players in the D-A-CH region.”

More information:
Finnester Coatings Oy AMAC
Source:

AMAC GmbH

 ATLAS: cutting-edge technology for sustainable vehicle acoustics (c) Autoneum Management AG
Messsystem ATLAS
27.08.2020

ATLAS: cutting-edge technology for sustainable vehicle acoustics

For more than 50 years, vehicle manufacturers have relied within their model development on Autoneum’s measuring systems for vehicle acoustics. With ATLAS, Autoneum has now added another particularly powerful device to the portfolio: Thanks to the efficient and reliable measurement methodology, noise-reducing vehicle components and materials can be analyzed and developed faster and with a significantly lower need for resources in the future.

For more than 50 years, vehicle manufacturers have relied within their model development on Autoneum’s measuring systems for vehicle acoustics. With ATLAS, Autoneum has now added another particularly powerful device to the portfolio: Thanks to the efficient and reliable measurement methodology, noise-reducing vehicle components and materials can be analyzed and developed faster and with a significantly lower need for resources in the future.

With the ongoing electrification of vehicles and trends like autonomous driving, future car generations will no longer be used solely for transport – remote working and recreation will equally play a key role. This requires a vehicle interior that is as noiseless as possible. In order to identify and insulate potential internal and external sound sources already in the pre-development of new models, car manufacturers around the world rely on Autoneum’s highly specialized measurement tools. The newly launched ATLAS – short for “Airborne Transmission Loss Analysis System” – measures the acoustic insulation and transmission loss of components such as carpets, inner dashes and floor insulators. This allows customers to assess noise-reducing parts within minutes and select acoustic components tailored to their needs.

ATLAS sets new testing standards in this regard. While developers previously had to analyze the NVH behavior (noise, vibration, harshness) of interior parts using material samples of around one square meter in size, ATLAS makes this process faster, cheaper and more environmentally-friendly. It enables measurements of small samples with a diameter of no more than ten centimeters, which substantially decreases the amount of material used. Thanks to its four highly sensitive microphones, only two trials are required to collect precise and valid test data, making the system developed at Autoneum’s research center in the Swiss city of Winterthur especially suitable for quality assurance and repeatability of the results obtained. Users also benefit from time savings of up to 50 percent compared to the previous testing standard.

Autoneum’s measurement systems represent the global industry standard and are used successfully by vehicle manufacturers, automotive suppliers and research institutions alike. The Company is therefore not only making a significant contribution to the mobility of the future with its noise-reducing products, but now with ATLAS as well.

Source:

Autoneum Management AG

New Monfortex line part of a long-term vision for Kettelhack (c) Monforts
The Monfortex sanforizing line with integrated Qualitex 800 control has now been operational at Kettelhack’s plant in Rheine, Westphalia, for a number of months.
24.08.2020

New Monfortex line part of a long-term vision for Kettelhack

  • Kettelhack GmbH – a German leader in the dyeing and finishing of monochrome fabrics for high-quality and durable workwear and bed linen – has this year retired its existing Monforts sanforizing line after 35 years of daily service, replacing it with a new one.

The first line was installed in 1985 during a decisive time for the company.

Taking the helm in the early 1980s, Jan Kettelhack – the current CEO, owner and great grandson of Heinrich Kettelhack who founded the company back in 1874 – made a number of decisions that have secured its success over the following decades.

In 1982 Kettelhack had to vacate its existing plant in the city of Rheine due to urban development restrictions and despite a general sense of crisis in the European textile industry at that time, opted to relocate and build a new highly automated plant that was not reliant on mechanical and personnel-intensive processes. This was aligned with a greater focus on competitive international sales.

  • Kettelhack GmbH – a German leader in the dyeing and finishing of monochrome fabrics for high-quality and durable workwear and bed linen – has this year retired its existing Monforts sanforizing line after 35 years of daily service, replacing it with a new one.

The first line was installed in 1985 during a decisive time for the company.

Taking the helm in the early 1980s, Jan Kettelhack – the current CEO, owner and great grandson of Heinrich Kettelhack who founded the company back in 1874 – made a number of decisions that have secured its success over the following decades.

In 1982 Kettelhack had to vacate its existing plant in the city of Rheine due to urban development restrictions and despite a general sense of crisis in the European textile industry at that time, opted to relocate and build a new highly automated plant that was not reliant on mechanical and personnel-intensive processes. This was aligned with a greater focus on competitive international sales.

From 1986, the company’s proficiency as a specialist in solid-colour textiles led to workwear textiles becoming a bedrock of the business. Continuous investments in machinery and technical equipment have resulted in a fully integrated and rationalised single source site dedicated solely to what the company does best – the expert dyeing and finishing of textiles.

Crucial process steps

These stages in the textile value-added chain, Jan Kettelhack has observed, are crucial to the quality of a final product in workwear – whether it stands the test in everyday use, how comfortable it is, and how many washes it can withstand.

Central to this is the sanforizing process, which pre-shrinks a fabric by compressing it prior to washing. This limits any residual or further shrinkage in a made-up finished garment to less than 1%, to ensure perfect comfort and fit over an extended lifetime.

“We certainly can’t complain about the performance of the old Monfortex sanforizing line which gave us so many uninterrupted years of service, but certain spare parts for it were becoming increasingly hard to source, the control unit was becoming a little unstable and we couldn’t risk potential interruptions to our production schedule,” says Kettelhack plant manager Hendrik Pleimann. “In many ways, the new Monfortex sanforizer is much the same as the old one in terms of its mechanical reliability and robust construction, but of course today’s drives are much more efficient, and when it comes to the automation features and control units – and the data we can generate and analyse for increasing efficiency – that’s a whole new world.”

Qualitex 800

The two-metres-wide Monfortex line benefits from the latest Qualitex 800 control system which allows all parameters to be easily automated via the 24-inch colour touchscreen, including production speed, control of all fabric feed devices, rotation spray or steaming cylinder options, the width of the stretching field and the rubber belt pressure.

The integrated Compactomat system allows a continuous indication and control of the shrinkage values and the temperatures of the shrinking cylinder and felt calender. Up to 10,000 separate process parameter records can be generated and stored by the data manager.

Full line management can be optimised via the batch-specific calculation of all process material consumption and water and electricity use, with any standstill times analysed and immediately corrected for the future.

Any further assistance required is available via Monforts Teleservice, with direct connection to technicians and virtual access to machine analysis.

Professional

Commissioning of the new Monfortex line at Kettelhack commenced in January and it was fully operational in a relatively short time.

“This was a very professional installation provided by the Monforts team with whom we have a very good relationship dating back many years, and everyone knew what was required from both sides,” says Mr Pleimann. “Our operators have found the new line very user friendly and we are very pleased with how everything proceeded so smoothly. An unexpected benefit is that the new line is also a lot quieter, of course, which is something our operatives are appreciating.”

Key features of the Monfortex line are the proven fabric preparation, weft straightening and spreading units, prior to the compressive shrinkage machine with a 750mm shrinking cylinder, and a felt calender equipped with 2,000mm diameter drying cylinder. The line also features an integrated automatic grinding unit.

Customer service

Kettelhack is processing primarily cotton and polyester woven fabrics, with lyocell becoming increasingly popular in workwear for its softness and comfort.

As part of its customer service, the company stocks more than a million metres of grey fabric and at least 1.2 million metres of finished and rolled standard fabric in its warehouse at any one time, with a further 750,000 metres permanently in production.

While a significant cost, this commitment ensures Kettelhack customers can be fully flexible and rely on it as a partner.

“As a family-run company with around a hundred employees, Kettelhack operates very differently to bigger businesses which have to constantly consider their immediate quarterly profits,” Mr Pleimann concludes. “The thinking at Kettelhack is in terms of the next twenty years and ensuring that the business will be just as successful for the next generation as it is today. We also have a very flat organisational structure in which everyone is involved and takes an active part, which makes it a very nice place to work.”

Source:

On behalf of A. Monforts Textilmaschinen GmbH & Co. KG by AWOL Media.

28.07.2020

Autoneum: Corona-related slump in revenue – bottom point overcome

The coronavirus pandemic and its massive impact on the automotive industry led to an un-precedented market slump in the first half of 2020 and a corresponding revenue decline at Autoneum. Revenue in local currencies fell by –32.7% compared to the prior-year period, and in Swiss francs by –36.8% to CHF 730.6 million. The turnaround program for the North American sites made further progress in the first six months and is showing the targeted results. However, they were clearly overcompensated by the massive impact of the corona-virus crisis, which led to a negative net result of CHF –54.9 million despite comprehensive cost flexibilization measures.

The coronavirus pandemic and its massive impact on the automotive industry led to an un-precedented market slump in the first half of 2020 and a corresponding revenue decline at Autoneum. Revenue in local currencies fell by –32.7% compared to the prior-year period, and in Swiss francs by –36.8% to CHF 730.6 million. The turnaround program for the North American sites made further progress in the first six months and is showing the targeted results. However, they were clearly overcompensated by the massive impact of the corona-virus crisis, which led to a negative net result of CHF –54.9 million despite comprehensive cost flexibilization measures.

Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production completely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.


 Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production com-pletely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.

Autoneum promptly responded to the pandemic-related market slump by adopting extensive cost-cutting measures in all regions. These include the reduction of employee costs by, among other things, adjusting time accounts, introducing short-time work at eligible locations and temporary layoffs as well as headcount reduction, mainly among temporary workers. In addition, operating expenditures were limited to the absolutely necessary. The investment volume for 2020, already reduced from previous years, was downsized even further. Autoneum continues to benefit in this regard from the high level of investments undertaken in recent years.

 Although the coronavirus crisis and the measures taken to contain it dominated Autoneum’s course of business in the first half of 2020, the Company achieved necessary operational and financial im-provements during this period. The comprehensive turnaround program for the North American sites made further progress and is on track. Efficiency improvements already achieved there had a posi-tive effect on the figures of the first half-year, but were significantly overcompensated by the substan-tial impact of the COVID-19 crisis. Savings and cost flexibilization measures taken immediately and implemented worldwide in view of the revenue loss could not offset the ongoing, capacity-related fixed costs. This led at the Group level to a negative EBIT of CHF –31.8 million (prior-year period: CHF 16.4 million), which equates to an EBIT margin of –4.4% (prior-year period: 1.4%). The net result decreased because of the severe revenue shortfall to CHF –54.9 million (prior-year period: CHF –6.0 million).

Outlook
For 2020 Autoneum expects revenue to develop at market level. Although customers’ production volumes should increase again in the second half of 2020 compared with the first semester, latest fore-casts indicate that they will remain clearly below the level of the second half of 2019. Immediately implemented and ongoing cost reduction measures as well as further operational optimizations also within the turnaround program in North America will lead to improvements in the second half of the year. Due to the current uncertainties, a reliable statement on the net result for the full year 2020 thus cannot be made. With regard to the mid-term targets, a recovery of the profitability level is expected, but it will largely depend on the market development.

Source:

Autoneum Management AG

Sustainable leadership for GtA with new Monforts Montex wide width lines (c) AWOL Media
GtA Managing Director Andreas Niess
27.07.2020

Sustainable leadership for GtA with new Monforts Montex wide width lines

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

Source:

AWOL Media for A. Monforts Textilmaschinen GmbH & Co. KG

Digitak services always in fashion with Mimaki sublimation and direct printing (c) Mimaki
Filippo Taccani, founder and owner at Digitak, in the company’s production department, surrounded by an arsenal of Mimaki’s printing solutions.
01.07.2020

Digitak services always in fashion with Mimaki sublimation and direct printing

  • Specialised in dye-sublimation printing, the Italian company has conquered the heights of the high fashion sector with its top-quality printed fabrics.
  • With its recent investment in a direct-to-fabric printing line, Digitak is preparing to expand its range of printed products, focusing on fabric differentiation.

Dye sublimation printing of high fashion designs is the beating heart of Digitak, an Italian company specialised in digital textile printing. Operating in the textile district of Lombardy, Italy, the company has established itself among the main suppliers in the world of high fashion and sportswear in just under 15 years.

  • Specialised in dye-sublimation printing, the Italian company has conquered the heights of the high fashion sector with its top-quality printed fabrics.
  • With its recent investment in a direct-to-fabric printing line, Digitak is preparing to expand its range of printed products, focusing on fabric differentiation.

Dye sublimation printing of high fashion designs is the beating heart of Digitak, an Italian company specialised in digital textile printing. Operating in the textile district of Lombardy, Italy, the company has established itself among the main suppliers in the world of high fashion and sportswear in just under 15 years.

Making production versatility one of the cornerstones of its philosophy, Digitak has continued to invest in technology, as well as research and development its product portfolio. This forward-thinking approach has enabled the company to guarantee innovative, personalised products with meticulous attention to detail, with the highest – almost obsessive – standards of quality and maximum design flexibility. Over the years, the extensive experience gained by the company’s management in the field of sublimation with traditional and digital techniques, combined with their investment decisions have allowed Digitak to enhance its production performance, gradually implementing higher quality standards and differentiating itself from the competition in the complex and competitive sector of high fashion. An important feat, which has not, however, dampened its enthusiasm and willingness to continue growing and exceeding its goals. The company’s latest investment in a direct-to-fabric digital printing line with pigment ink propels the company into a new and promising production dimension.

Sublimation printing specialists

Since Digitak’s establishment, Filippo Taccani, the founder and current owner of the company, had set himself a clear and ambitious objective: “I wanted to take up the challenge of operating digitally - printing fabrics using this innovative technology to create products on a par with those  I had achieved with traditional sublimation textile printing methods during my previous work experience.”

The purchase of a Mimaki JV4 plotter, one of the first to be installed in Italy, marked the beginning of Digitak’s adventure. “To start the business, I needed a printing system that could operate with dispersed inks to print on polyester and I found the JV4 to be the best option,” explains Taccani. “It was an excellent decision, because I used these plotters to build the company and its success.”

The first Mimaki plotter was in fact followed by a second and a third. When it bought the fifth, the company moved to an industrial unit in Tradate (Varese) – Digitak’s current site – which now houses around fifteen Mimaki JV33 plotters, in addition to three Mimaki TS500-1800 wide-format sublimation printers, and a Mimaki TS300P-1800 high-speed sublimation printer. This Mimaki powered production facility – which is one of the company’s core strengths – was recently expanded with the addition of a Mimaki TX300P-1800B belt-type hybrid printing system, together with a Mimaki TR300-1850C textile coater and a Mimaki Tiger-1800.

“Naturally, over the years, we have also tested printing systems from other suppliers, but we have always returned to Mimaki. With high fashion as our key market, we need to guarantee our customers the highest levels of quality and, to date, we have never found solutions that beat the quality of this Japanese brand’s technology.”

According to Taccani, the difference lies in the “calligraphy” of Mimaki’s machines, that is the line of the ink on the fabric: “Unlike its competitors, Mimaki has focused on the ‘waveforms’, i.e. the electronics associated with the print heads. This attention paid to the way the ink jet is managed from the print head has allowed Mimaki to achieve unparalleled levels of accuracy, an aspect that has given my company a clear competitive edge.”

Moreover, at Digitak, quality comes before quantity: “We prefer to dedicate an extra day to production to guarantee the customer a final product that fully meets requirements and expectations. Mimaki’s technology not only suits this business model bult on top quality, but it crucially enables it.”

Operational and creative flexibility

Digitak currently prints around 2,000 linear metres of fabric per day. Its portfolio ranges from clothing and scarves, to beach and swimwear, with related personalised accessories, to sportswear, with technical properties such as breathability, comfort, resistance to external agents. The company have even added customised outdoor furniture to their offering of diverse and creative products.
The company’s machines operate continuously, 24/7. During the day, the machines are mainly used to develop and produce samples and colour proofs, while the actual production is carried out at night. “Thanks to our technology, we have developed an extraordinary operational flexibility. The fact that we have so many plotters allows us to work on multiple designs at the same time and to launch projects that are also very different from one another,” explains Taccani. “There are also some other crucial factors that have contributed, and continue to contribute, to increasing our production efficiency. The reliability of Mimaki’s solutions and the remote monitoring option offered is key. Once the standard start-up monitoring has been carried out and the machines are found to be printing correctly, we can let them work overnight without an operator. This is a great benefit for people who, like us, manage such a large and diverse fleet of machines.”

Digitak takes the same approach to customer service. Faced with an increasingly demanding market in terms of creativity, precision and completeness of service, the company wants to guarantee flexibility and customisation. “We decided to set up a department dedicated to the pre-press stage, in charge of preparing and checking the files supplied by customers. Seldom do our teams not need to do some editing of the files supplied, even if it’s only to make small changes that are essential for the print document to be as suitable as possible and to achieve the best final result.”

Technologies of the future

With a view to further enhancing production and customer service, Taccani has chosen to take on a new challenge, switching things up with some of the most recent investments.

While maintaining the focus on dye sublimation printing, Taccani has focused on technological diversification by installing a direct-to-fabric digital printing line. This consists of a Mimaki TX300P-1800B printing system with pigment inks and a TR300-1850C coater from Mimaki’s TR series. “The market continues to evolve and now requires even more flexibility regarding both processes and the fabrics supplied. This means that great opportunities exist for a print shop capable of simultaneously producing the same design – with minimal colour adjustment – on different fabrics, guaranteeing similar and accurate results. And this is precisely the path we are taking,” says Taccani. “Why have we opted for Mimaki again? Well, I had an opportunity to try out their new pigment inks and I immediately realised that they are a generation ahead of the other pigments available on the market. The cyan is very clean, the black is deep and there is a very interesting fullness of colour, suitable not only for furnishings, but also for other applications in the clothing sector.”

With its pigment inks, the new direct-to-fabric printing line allows Digitak to explore other related market segments. Thanks to the innovative automatic belt system, the TX300P-1800B guarantees good productivity and high-quality results. A standard of quality that is also boosted by the TR300-1850C fabric pre-treatment system: “This coater is essential for ensuring the best possible preparation of fabrics for printing. In fact, we are able to treat fabrics to make them suitable for the type of print they are intended for, sanitise them for specific applications and, in some cases, even dye them, with excellent quality.”

According to Taccani, another beneficial factor of direct-to-fabric pigment printing technology is the eco-sustainability of the process and its lower environmental impact. “We are proud to be able to offer our customers excellent printing results using little water and printing in ‘green mode’, with both the technologies we have available. I consider them winning technologies for the future, as both dye sublimation printing and direct-to-fabric printing with pigment inks use little water while mainly requiring the use of energy. Therefore, if you use renewable energy, then you’re done.”

Digitak’s other trump card is the Tiger-1800 installed in 2019. With this industrial printing system, the company aims to increase production volumes while maintaining its high-quality standards and further optimising costs. “We are excited to have these promising technologies available to us in-house. We are currently experimenting with these solutions, testing new opportunities and evaluating which paths to take to stay ahead of the game,” concludes Taccani.

 

Source:

Mimaki Europe B.V.

Enormes Interesse an virtueller interpack von Markt- und Innovationsführer Sappi (c) Sappi Europe
Sappi successfully ran its virtual interpack 2020 conference from 6 to 31 May.
23.06.2020

Huge interest in virtual interpack conference from the market and innovation leader Sappi

Sustainable solutions that pack a punch  

With over 6,500 visitors and more than 2,000 participants at a total of 720 minutes of live presentation sessions and with many potential new customers in the live info chat, the virtual interpack conference organised by Sappi was a resounding success. Sappi presented its latest developments, future prospects and current range of packaging and speciality papers at the event. In addition to further networking opportunities, the visitors took full advantage of the chance to get in contact with the Sales team.

Sustainable solutions that pack a punch  

With over 6,500 visitors and more than 2,000 participants at a total of 720 minutes of live presentation sessions and with many potential new customers in the live info chat, the virtual interpack conference organised by Sappi was a resounding success. Sappi presented its latest developments, future prospects and current range of packaging and speciality papers at the event. In addition to further networking opportunities, the visitors took full advantage of the chance to get in contact with the Sales team.

  • For the packaging of the future: sustainable, high-quality paper
  • Second-generation barrier papers ensure optimal protection of goods as food packaging
  • Providing what the world wants: fully recyclable packaging

Based on the motto ‘Pro Planet: Paper Packaging – welcome to the new pack-age’, the market leader in functional paper packaging presented numerous opportunities at its virtual interpack 2020 conference for its customers to package their food or non-food products in sustainable, premium packaging. In doing so, the company is contributing to the UN’s sustainability objectives. With the Sappi Guard range, Sappi presented barrier papers that render additional special coatings and laminations redundant and can be recycled in the paper stream. Featuring integrated barriers, they ensure that the product quality of foods and other goods is preserved. The second generation of barrier papers, now even more environmentally friendly, was also introduced at the virtual event. Another area of focus of the virtual interpack event was sealable papers, suitable for a wide range of packaging applications in the food and non-food sectors.

Of course, the concept of sustainability was also a key issue at the conference. As a home-compostable paper, Algro Nature meets the current demand for fully recyclable packaging. Sappi thus remains true to its goal of presenting its customers with more and more environmentally friendly solutions for the benefit of people and the environment.

‘We were overwhelmed by the success of our first virtual interpack conference, but we look forward to having direct contact again in spring 2021 in Düsseldorf,’ says Thomas Kratochwill, Vice President Sales & Marketing Packaging and Speciality Papers at Sappi Europe, with regard to the delayed interpack conference.

Source:

Marketing Communications Specialist Speciality Papers
Sappi Europe

10.06.2020

“Autoneum Pure.”: new sustainability label for products

Technologies with an excellent environmental performance throughout the entire product life cycle – that is what “Autoneum Pure.” stands for. In future, components that meet the highest standards in terms of sustainability and eco-friendliness can be identified at a glance under this label. This also includes the innovation “Mono-Liner” for wheelhouse outer liners.

As innovation leader in acoustic and thermal management, Autoneum continuously invests in the development and production of resource-saving components that make cars lighter and thus more climate-friendly. In view of an increasing sustainability awareness and the correspondingly greater information needs on environmentally-friendly vehicle components, the Company has now launched Autoneum Pure. The label determines particularly sustainable technologies, thereby guiding car manufacturers in product selection for future models.

Technologies with an excellent environmental performance throughout the entire product life cycle – that is what “Autoneum Pure.” stands for. In future, components that meet the highest standards in terms of sustainability and eco-friendliness can be identified at a glance under this label. This also includes the innovation “Mono-Liner” for wheelhouse outer liners.

As innovation leader in acoustic and thermal management, Autoneum continuously invests in the development and production of resource-saving components that make cars lighter and thus more climate-friendly. In view of an increasing sustainability awareness and the correspondingly greater information needs on environmentally-friendly vehicle components, the Company has now launched Autoneum Pure. The label determines particularly sustainable technologies, thereby guiding car manufacturers in product selection for future models.

Autoneum Pure is based on a comprehensive set of criteria assessing the sustainability performance of a product in all four phases of its life cycle: material procurement, production, use and end of life. For example, components with a high content of recyclable materials or those that achieve significant weight savings compared to comparable standard components qualify for the “Autoneum Pure.” label. Autoneum already offers various multifunctional technologies that meet the high standards for Autoneum Pure products: Ultra-Silent for underbody systems or battery undercovers, Di-Light for carpet systems, Prime-Light and IFP-R2 for inner dashes and floor insulators as well as Hybrid-Acoustics PET for e-motor encapsulations and engine-mounted parts, which was launched in fall 2019.

With Mono-Liner, the latest innovation for wheelhouse outer liners is also included in the Autoneum Pure portfolio. Among other things, the Mono-Liner-based components convince thanks to their lightweight construction, thereby contributing to lower vehicle weight with correspondingly less fuel consumption and emissions. The excellent life cycle assessment is also based on their particularly resource-saving manufacturing: Production cut offs of the components, which consist to a large extent of recycled PET fibers, can be processed into pellets and completely returned to the manufacturing process as fibers. An SUV and a crossover model from a US vehicle manufacturer already benefit from Mono-Liner wheelhouse outer liners.

Anahid Rickmann, Head of Corporate Communications & Responsibility, explains: “With Autoneum Pure we are the first automotive supplier to establish a sustainability label in the field of acoustic and thermal management. Autoneum Pure is part of the Company's Advance Sustainability  Strategy 2025 and sets industry standards in product communication.”

Source:

Autoneum Holding AG

Flight Design selects Hexcel’s HexPly® M79 Carbon Fiber Prepregs for Ultralight Aircraft (c) Hexcel Corporation
30.04.2020

Flight Design selects Hexcel’s HexPly® M79 Carbon Fiber Prepregs for Ultralight Aircraft

STAMFORD – German ultralight aircraft specialist Flight Design has chosen Hexcel as its key supplier adopting low-temperature curing prepreg into its aircraft production. Hexcel’s HexPly® M79 Carbon Fiber prepregs deliver a more consistent final product by ensuring constant material quality and processing parameters and produce a lighter and stronger aircraft at a more competitive overall cost.

Flight Design has always relied heavily on composites for its aircrafts’ ultralight construction and turned to long-term composite materials partner Lange + Ritter, part of Hexcel’s European distribution network, when they began searching for a prepreg material solution. Hexcel and Lange + Ritter created several new product codes specifically for Flight Design and then supplied materials for initial handling trials and prototyping. Hexcel’s HexPly M79 low temperature curing out of autoclave solution was first used in the new F2 prototype. As part of its material supply package, Lange + Ritter also sent a team for on-site training and technical support, allowing the Flight Design production team to get up to speed with prepreg as quickly as possible.

STAMFORD – German ultralight aircraft specialist Flight Design has chosen Hexcel as its key supplier adopting low-temperature curing prepreg into its aircraft production. Hexcel’s HexPly® M79 Carbon Fiber prepregs deliver a more consistent final product by ensuring constant material quality and processing parameters and produce a lighter and stronger aircraft at a more competitive overall cost.

Flight Design has always relied heavily on composites for its aircrafts’ ultralight construction and turned to long-term composite materials partner Lange + Ritter, part of Hexcel’s European distribution network, when they began searching for a prepreg material solution. Hexcel and Lange + Ritter created several new product codes specifically for Flight Design and then supplied materials for initial handling trials and prototyping. Hexcel’s HexPly M79 low temperature curing out of autoclave solution was first used in the new F2 prototype. As part of its material supply package, Lange + Ritter also sent a team for on-site training and technical support, allowing the Flight Design production team to get up to speed with prepreg as quickly as possible.

HexPly M79 prepregs can be cured at temperatures as low as 70˚C for eight hours or 80˚C for four hours, reducing tooling costs and increasing build rates. When combined with Hexcel’s innovative air venting Grid Technology, HexPly M79 UD carbon tapes can also be laminated with reduced debulking steps to produce void contents <1% irrespective of laminate thickness. With consistently low void contents and improved mechanical properties, designers and engineers are able to further optimize highly loaded composite aerostructures.

As more and more of its composite aircraft parts are transferred to prepreg technology, Flight Design is seeing the benefits of its switch to HexPly M79. Lay-up is cleaner and more precise, low temperature oven curing is quick and energy efficient, and the manufacturing process consistently outputs exceptionally high-quality laminates and components. The long-term strategy is to integrate HexPly M79 across the range, with Hexcel materials lightening the ultralight aircraft at Flight Design even further.

“The materials and technology package from Hexcel and Lange + Ritter has been a big success for us at Flight Design,” comments Daniel Gunther, Managing Director at Flight Design. “When we took the decision to switch to prepreg, we looked at many options but only Hexcel and Lange + Ritter could offer us low temperature out-of-autoclave (OOA) curing, globally respected material quality and the customer service levels we were searching for.”

TexCoat F4 Baldwin's revolutionizing Textile finishing system (c) Baldwin
TexCoat F4 Baldwin's revolutionizing Textile finishing system
11.03.2020

Baldwin to introduce TexCoat G4 fabric finishing system at Techtextil North America

Non-contact precision spray technology enhances productivity, sustainability and process control

Baldwin Technology Company Inc. has announced that it will showcase the TexCoat G4 non-contact precision spray fabric finishing system at the Techtextil North America tradeshow, held from May 12 to 14, 2020, in Atlanta (booth #3048).

With extensive sustainability benefits, unprecedented tracking and process control, and industry 4.0 integration, the TexCoat G4 provides consistently high-quality fabric finishing, with no chemistry waste, as well as minimal water and energy consumption. 

Non-contact precision spray technology enhances productivity, sustainability and process control

Baldwin Technology Company Inc. has announced that it will showcase the TexCoat G4 non-contact precision spray fabric finishing system at the Techtextil North America tradeshow, held from May 12 to 14, 2020, in Atlanta (booth #3048).

With extensive sustainability benefits, unprecedented tracking and process control, and industry 4.0 integration, the TexCoat G4 provides consistently high-quality fabric finishing, with no chemistry waste, as well as minimal water and energy consumption. 

Baldwin’s innovative non-contact spray technology eliminates chemistry dilution in wet-on-wet processes. The TexCoat G4 consistently and uniformly sprays chemistry across the fabric surface and applies it only where needed, on one or both sides of the fabric. Customers can expect no bath contamination during the finishing process, as well as minimal downtime during changeovers, which are made easy with recipe management that includes automated chemistry and coverage selection.

The TexCoat G4 also enhances sustainability by wasting no chemistry during color, fabric or chemistry changeovers, and because only the required chemistry volume is applied to the fabric, wet pick-up levels can be reduced by up to 50 percent—leading to 50 percent less water and energy consumption. Furthermore, in single-side applications, drying steps can be eliminated for various textiles, including those that are back-coated and laminated, thereby streamlining and simplifying the production process.

More information:
Baldwin
Source:

Baldwin

Hero Banner (c) EFI GmbH
Hero Banner
27.02.2020

Fashion Enter Closes UK's Skills Gap with EFI Optitex 3D

Leading fashion and textile industry training centre offers UK professionals hands-on experience with 3D digital design tools
 
EFI™ Optitex®, Electronics For Imaging's global provider of integrated end-to-end 2D & 3D CAD/CAM software solutions for the fashion and apparel industry, today announced its partnership with Fashion Enter Ltd. (FEL), a UK training and technical skills development centre for the fashion and textile industry. FEL has implemented EFI Optitex 3D solutions into its course curriculum.
 
Established in 2006, London-based FEL is a veritable "all-in-one" technology hub for the fashion and textile industry, offering multiple training and technical skills development services encompassing the entire design to production cycle. A not for profit, social enterprise, FEL also provides apprenticeships and adult learning through an Educational Skills and Finding Agency- and Social Enterprise London-approved technical centre supported by Haringey Council, Mayor's Good Growth Fund and online fashion retailer ASOS®.
 

Leading fashion and textile industry training centre offers UK professionals hands-on experience with 3D digital design tools
 
EFI™ Optitex®, Electronics For Imaging's global provider of integrated end-to-end 2D & 3D CAD/CAM software solutions for the fashion and apparel industry, today announced its partnership with Fashion Enter Ltd. (FEL), a UK training and technical skills development centre for the fashion and textile industry. FEL has implemented EFI Optitex 3D solutions into its course curriculum.
 
Established in 2006, London-based FEL is a veritable "all-in-one" technology hub for the fashion and textile industry, offering multiple training and technical skills development services encompassing the entire design to production cycle. A not for profit, social enterprise, FEL also provides apprenticeships and adult learning through an Educational Skills and Finding Agency- and Social Enterprise London-approved technical centre supported by Haringey Council, Mayor's Good Growth Fund and online fashion retailer ASOS®.
 
To help lay the foundation for the UK's fashion and textile industry on its imminent journey towards digital transformation, FEL was determined to close the mounting skills gap in both industry and academia and offer UK professionals hands-on experience and exposure to 3D digital design tools. With a keen understanding of the market's growing need for speed, flexibility and shifting demands, in September 2019, FEL selected EFI Optitex as its 3D technology partner. FEL sought advanced 3D solutions that would enable innovative digital design courses, apprenticeships and bespoke training, including collaboration with leading fashion retailers such as Marks & Spencer®, ASOS, Next®, and many others.
 
After a short but highly intensive training period FEL implemented EFI Optitex 3D into its design and production processes, including pattern design and 3D tools for design and fitting. Since the recent implementation, FEL has already reaped the benefits of EFI Optitex 3D fully digital design, from sampling and grading, through to production. During a preliminary implementation phase, EFI Optitex 3D will enable FEL to deliver a wide range of accredited 3D design courses and forge collaborations with new customers, a result of EFI Optitex 3D's intuitive design tools, ease of use, and time and resource savings.

More information:
EFI Optitex
Source:

EFI GmbH