From the Sector

Reset
439 results
26.03.2024

BVMed-Positionspapier zur Europawahl

Der Bundesverband Medizintechnologie (BVMed) fordert in seinem Positionspapier zur Europawahl am 9. Juni 2024 einen eigenen Gesundheitsausschuss im Europäischen Parlament, um den gestiegenen Stellenwert der Gesundheitsthemen abzubilden. Unter dem Titel „Medizintechnik-Standort Europa stärken“ ist es für den deutschen Medizintechnik-Verband besonders wichtig, dass Europa Lehren aus der Corona-Pandemie zieht, die Resilienz des Gesundheitssystems stärkt und damit die medizinische Versorgung krisenfest gestaltet. „Wir brauchen als MedTech-Branche vor allem einen einheitlichen regulatorischen Rahmen – ohne zusätzliche oder gar weitergehende Standards in den einzelnen Mitgliedsstaaten“, so BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll.

Der Bundesverband Medizintechnologie (BVMed) fordert in seinem Positionspapier zur Europawahl am 9. Juni 2024 einen eigenen Gesundheitsausschuss im Europäischen Parlament, um den gestiegenen Stellenwert der Gesundheitsthemen abzubilden. Unter dem Titel „Medizintechnik-Standort Europa stärken“ ist es für den deutschen Medizintechnik-Verband besonders wichtig, dass Europa Lehren aus der Corona-Pandemie zieht, die Resilienz des Gesundheitssystems stärkt und damit die medizinische Versorgung krisenfest gestaltet. „Wir brauchen als MedTech-Branche vor allem einen einheitlichen regulatorischen Rahmen – ohne zusätzliche oder gar weitergehende Standards in den einzelnen Mitgliedsstaaten“, so BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll.

Um ein widerstandsfähiges Gesundheitssystem zu schaffen, fordert der BVMed attraktive Rahmenbedingungen für lokale Produktion und die Stärkung der Resilienz der Lieferketten. Eine „digitale Bestandsplattform für versorgungskritische Medizinprodukte und Arzneimittel“ könne zudem dazu beitragen, dass kritische Produkte uneingeschränkt zur Verfügung stehen. Sinnvoll sei auch eine „Whitelist für kritische Rohstoffe unter dem Critical Raw Materials Act“. Bei der Erarbeitung von politischen Maßnahmen zur Verbesserung der Effizienz und Integrität von Lieferketten müssen alle relevanten Stakeholder einbezogen werden – „inklusive der Medizintechnikbranche“, heißt es im BVMed-Europapapier.

Beim Thema Nachhaltigkeit spricht sich der MedTech-Verband dafür aus, die Vorgaben des europäischen Green Deals am Wohl der Patient:innen auszurichten. „Neue oder geänderte Regulierungen dürfen niemals die Versorgung von Patient:innen gefährden“, heißt es im Positionspapier. Da Produktänderungen zeit- und ressourcenintensiv sowie in der EU-Medizinprodukte-Verordnung (MDR) streng reguliert seien, benötigen umwelt- und nachhaltigkeitsbezogene Regulierungen, die Auswirkungen auf die Gesundheitsversorgung haben, angemessene Ausnahmeregelungen und Übergangsfristen.

Ein wichtiges Anliegen sind dem BVMed die Verbesserungen der MDR, um einen effizienten regulatorischen Rahmen für Medizinprodukte zu schaffen, der die Patient:innenversorgung gewährleistet. Der BVMed fordert daher unter anderem die Abschaffung der fünfjährigen Re-Zertifizierungs-Pflicht, die Einführung eines Fast-Track-Verfahrens für innovative Produkte, Orphan Devices und Nischenprodukte, die Steigerung der Effizienz, der Transparenz und der Berechenbarkeit des MDR-Systems sowie die Zusammenführung der Verantwortung im System über eine zu schaffende Governance-Struktur. Doppelregulierungen müssten durch die Harmonisierung der Anforderungen in verschiedenen Rechtsakten verhindert werden.

Ein weiterer Schwerpunkt der Positionen des deutschen MedTech-Verbandes ist es, Innovationen voranzutreiben und Digitalisierung zu forcieren. Der Europäische Raum für Gesundheitsdaten (EHDS) lege die Grundlage für den Datenaustausch und die Datennutzung für Unternehmen. Der Artificial Intelligence Act (AI-Act) solle bessere Möglichkeiten für die KI-Entwicklung schaffen, bringe aber auch neue Pflichten für Medizinprodukte mit sich, die effizient mit der bestehenden MDR in Einklang gebracht werden müssten. Der BVMed setzt sich für die Schaffung eines echten Binnenmarkts für digitale Gesundheitslösungen mit europaweiten Zulassungen und einheitlichen Standards für Datensicherheit aus. Der EHDS müsse allen Stakeholdern einen gleichberechtigten mit geringem bürokratischem Aufwand bieten. Außerdem müsste die Interoperabilität von Daten auf der Grundlage von international anerkannten Standards ausgebaut werden – „bei weitgehendem Verzicht auf nationale Besonderheiten bei Datenstandards“.

Schließlich sei es auf europäischer Ebene wichtig, Handel auszubauen, Fachkräfte zu sichern und Exporte zu stärken. Tendenzen der Renationalisierung und des Protektionismus erschwerten Europa die Handelsbeziehungen mit Drittstaaten und sorgen für erhebliche Marktzugangshürden. „Eine offene Handelspolitik ist jedoch für die exportstarke Medizintechnik-Branche ein entscheidender Faktor. Damit die Industrie so stark bleibt, bedarf es zudem der Sicherung des nötigen Fachkräftebedarfes“, heißt es in dem BVMed-Papier.

 

Source:

Bundesverband Medizintechnologie e.V.

26.03.2024

CARBIOS joins Paris Good Fashion

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS will be particularly involved in the association's project to set up a working group dedicated to the development of a "fiber-to-fiber" industry, one of Paris Good Fashion's top priorities over the next five years. While only 1% of textiles are currently recycled fiber-to-fiber (circular), this working group will identify levers for significantly increasing the share of recycled fibers in the industry.  Polyester currently follows a linear model from which we need to break out: virgin polyester is made from petroleum, and recycled polyester from PET bottles. After use, most of these products end their lives in landfill or incineration. A circular, "fiber-to-fiber" industry will give new life to textiles and reduce the environmental impact associated to their end-of-life management.

Source:

Carbios

25.03.2024

SGL Carbon: CEO Dr. Torsten Derr will not extend contract

The CEO of SGL Carbon SE, Dr. Torsten Derr, informed the Chairman of the Supervisory Board today that he will not extend his contract, which expires on May 31, 2025. Dr. Derr will continue his duties until the new CEO is appointed, at the latest until May 31, 2025.

“SGL Carbon is once again a strong and stable company whose profitable development I will continue to work on with all my strength until the last day. But even without me, my colleague on the Board of Management, Thomas Dippold, and the team will continue to develop the company successfully. The last almost four years have always been the achievement of the entire SGL team. SGL Carbon is now sailing in stable waters and my transformation work will therefore be completed shortly,” explains Dr. Torsten Derr.

The CEO of SGL Carbon SE, Dr. Torsten Derr, informed the Chairman of the Supervisory Board today that he will not extend his contract, which expires on May 31, 2025. Dr. Derr will continue his duties until the new CEO is appointed, at the latest until May 31, 2025.

“SGL Carbon is once again a strong and stable company whose profitable development I will continue to work on with all my strength until the last day. But even without me, my colleague on the Board of Management, Thomas Dippold, and the team will continue to develop the company successfully. The last almost four years have always been the achievement of the entire SGL team. SGL Carbon is now sailing in stable waters and my transformation work will therefore be completed shortly,” explains Dr. Torsten Derr.

“We are grateful to Dr. Derr for talking to us early on and in a spirit of trust. This will allow us to take our time in arranging his succession. SGL Carbon can look back on three successful financial years, is financially strong and relies on a broad-based management team that continues to drive forward the expansion of the business in strong growth markets. In our appreciative discussions, Dr. Derr has promised to complete all important projects with his usual commitment until the handover of the CEO position,” says Prof. Dr. Frank Richter.

The Supervisory Board will immediately begin the search for a successor to Dr. Torsten Derr.

More information:
SGL Carbon SE CEO management
Source:

SGL Carbon SE

(c) TMAS
25.03.2024

TMAS: Microfactory for filter bags in Sweden

ACG Kinna Automatic and ACG Nyström – members of TMAS, the Swedish textile machinery association – have delivered the first microfactory for the production of fully finished filter bags to an international filtration industry customer, in cooperation with JUKI Central Europe.

The microfactory’s configuration is based on two separate interconnecting modules – the Smart Filter Line (SFL) and the Filtermaster 2.0. The SFL handles the fabric feeding from rolls and its folding prior to seam construction, which can either be by automatic sewing, welding or with sewing and taping, depending on specifications. Very rapid changeover of the modular seaming methods can be achieved during product changes. The specific size of the now fully-tubular fabric is then precisely cut to size for each individual unit and further folded ready to be fed into the Filtermaster 2.0. The Filtermaster 2.0 then automatically attaches the reinforcement, bottom and snap rings onto the filter tube with a second Juki sewing head on a robotic arm, to form the fully finished filter bag ready for packaging.

ACG Kinna Automatic and ACG Nyström – members of TMAS, the Swedish textile machinery association – have delivered the first microfactory for the production of fully finished filter bags to an international filtration industry customer, in cooperation with JUKI Central Europe.

The microfactory’s configuration is based on two separate interconnecting modules – the Smart Filter Line (SFL) and the Filtermaster 2.0. The SFL handles the fabric feeding from rolls and its folding prior to seam construction, which can either be by automatic sewing, welding or with sewing and taping, depending on specifications. Very rapid changeover of the modular seaming methods can be achieved during product changes. The specific size of the now fully-tubular fabric is then precisely cut to size for each individual unit and further folded ready to be fed into the Filtermaster 2.0. The Filtermaster 2.0 then automatically attaches the reinforcement, bottom and snap rings onto the filter tube with a second Juki sewing head on a robotic arm, to form the fully finished filter bag ready for packaging.

Filter bags are employed in a wide range of industrial processes and while they may be largely under the radar as products, they represent a pretty significant percentage of overall technical textiles production.
They are used in foundries, smelters, incinerators, asphalt plants and energy production plants. Other key manufacturing fields – often where dust is generated – include the production of timber, textiles, composites, waste handling and minerals, in addition to chemicals, food production, pharmaceuticals, electronics and agriculture.

As a further example of the scale of the industry and the high volumes of fabrics involved, one supplier has delivered a single order of 30,000 filter bags to be used for flue gas cleaning at a European power plant. The bags can also be anywhere up to twelve metres in length and frequently have to be replaced.

Source:

Textile Machinery Association of Sweden

25.03.2024

Texhibition Istanbul: Fifth edition successfully concluded

The fifth edition of the Texhibition Istanbul Fabric and Textile Accessories Fair from 6 to 8 March 2024, organised by İTKİB Fuarcılık A.Ş. in cooperation with the Istanbul Textile Exporters Association (İTHİB), presented 557 exhibitors showcasing the entire range of the textile supplying section: from woven and knitted fabrics to accessories and artificial leather. A new addition was a separate hall for yarns and denim, the BlueBlackDenim hall. With this trade fair, Texhibition has more than doubled its floor space compared to the last event to 35,000 square metres.

Exhibitors
Texhibition Istanbul acts as a central point of contact for the entire international industry, with a clear focus on quality, innovation and the latest trends like the denim companies Bossa, Çalık, İsko, İskur and Kipaş at the BlueBlackDenim Hall.

Yarn companies such as Aksa, Diktaş, Ensar, Karafiber, Kaplanlar, Korteks, Migiteks, Sasa, Tepar showed the production power of the yarn sector, where the product quality, design and workmanship came together.

The fifth edition of the Texhibition Istanbul Fabric and Textile Accessories Fair from 6 to 8 March 2024, organised by İTKİB Fuarcılık A.Ş. in cooperation with the Istanbul Textile Exporters Association (İTHİB), presented 557 exhibitors showcasing the entire range of the textile supplying section: from woven and knitted fabrics to accessories and artificial leather. A new addition was a separate hall for yarns and denim, the BlueBlackDenim hall. With this trade fair, Texhibition has more than doubled its floor space compared to the last event to 35,000 square metres.

Exhibitors
Texhibition Istanbul acts as a central point of contact for the entire international industry, with a clear focus on quality, innovation and the latest trends like the denim companies Bossa, Çalık, İsko, İskur and Kipaş at the BlueBlackDenim Hall.

Yarn companies such as Aksa, Diktaş, Ensar, Karafiber, Kaplanlar, Korteks, Migiteks, Sasa, Tepar showed the production power of the yarn sector, where the product quality, design and workmanship came together.

In addition to well-known companies such as Almodo, Bahariye, BTD, Can Textile, Iskur, Kipaş, Menderes, Söktaş, Yünsa, Zorlu, İpeker a large number of other export-oriented companies from the segments of textiles (woven fabrics, knitting) presented their latest designs and products.

Visitors
25,752 visitors came from over 112 countries, 41.8% from the European Union (including Germany, Italy, the Netherlands, Spain, Romania etc.) and Great Britain, Ukraine,26.5% from Asia (including Russia etc.), 14.8% from the Middle East (including Jordan, United Arab Emirates, Saudi Arabia) 10.7% from North Africa (including Algeria, Tunisia etc.), 3.1% from North America (United States, Canada), 3.1% from South America and other countries.

American buyers from the USA and Canada in particular, but also a large number of Mexican and Colombian buyers took advantage of the numerous match-making opportunities at Texhibition. Many B2B meetings took place and led to numerous orders being placed, including from key accounts such as Alexander Wang, Asos, Forever 21, Sainsbury's, Veronica Beard etc.

More information:
Texhibition Istanbul Yarns Denim
Source:

JANDALI

HEREWEAR is winner of the Cellulose Fibre Innovation of the Year Photo: DITF
The Flexidress in its various forms
22.03.2024

HEREWEAR is winner of the Cellulose Fibre Innovation of the Year

At the "International Conference on Cellulose Fibers 2024" in Cologne, Germany, the Nova Institute for Ecology and Innovation awarded first place in the Innovation Prize to the project partners of the EU-funded HEREWEAR project. They presented a dress made of cellulose fibers, which is entirely made of straw pulp.

HEREWEAR is an EU-wide research project that brings together partners from research and industry. They are working to establish a European circular economy for locally produced textiles and clothing made from bio-based raw materials.
The HEREWEAR consortium consists of small and medium-sized enterprises and research institutions. HEREWEAR covers all the necessary expertise and infrastructure from academic and applied research and industry from nine EU countries.

The HEREWEAR approach includes technical and ecological innovations in the production of fibers, yarns, fabrics, knitwear and garments, as well as the use of regional value chains and the circular development of fashion items.

At the "International Conference on Cellulose Fibers 2024" in Cologne, Germany, the Nova Institute for Ecology and Innovation awarded first place in the Innovation Prize to the project partners of the EU-funded HEREWEAR project. They presented a dress made of cellulose fibers, which is entirely made of straw pulp.

HEREWEAR is an EU-wide research project that brings together partners from research and industry. They are working to establish a European circular economy for locally produced textiles and clothing made from bio-based raw materials.
The HEREWEAR consortium consists of small and medium-sized enterprises and research institutions. HEREWEAR covers all the necessary expertise and infrastructure from academic and applied research and industry from nine EU countries.

The HEREWEAR approach includes technical and ecological innovations in the production of fibers, yarns, fabrics, knitwear and garments, as well as the use of regional value chains and the circular development of fashion items.

New technologies for wet and melt spinning of cellulose and bio-based polyesters, e.g. PLA, from which yarns and fabrics are produced, form the technical basis. Coating and dyeing processes have been developed and tested as part of the project. In addition to reducing the carbon footprint of the product, another environmental goal is to reduce the release of microfibers throughout the textile manufacturing process and life cycle.

Improving the sustainability and recyclability of the developed garments is ensured by design for circularity and digitally networked production means. On-demand production is realized in so-called "microfactories", which are individualized and produce only for actual demand. This production method can be achieved through regional, networked value chains and enables the traceability of materials and manufacturing processes.

The dress presented at the award ceremony is an example of the cooperation and the different qualifications of the project partners: TNO (Netherlands Organization for Applied Scientific Research) provided sustainably produced pulp. The HighPerCell fibers were produced in DITF's spinning facilities. At the same time, designers from the fashion label Vretena created the design for the flexible, two-piece dress, which can be knitted without cutting waste. DITF textile experts worked with the designers to develop the knitting pattern. DITF textile engineers and technicians produced the knitted fabric and assembled the dress at the institutes’ technical center. DITF computer scientists and engineers created the "value chain" and "digital twins" for digital traceability of the production processes.

The innovation prize was awarded to the HEREWEAR consortiu for their joint achievement. Representatives of DITF Denkendorf and Vretena accepted the award on behalf of the EU project partners.

Source:

Deutsche Institute für Textil- und Faserforschung (DITF)

Collaboration between IHKIB and WRAP (c) IHKIB
18.03.2024

Collaboration between IHKIB and WRAP

In a move to enhance the global competitiveness of the Turkish apparel industry, the Istanbul Apparel Exporters' Association (IHKIB) has entered into a collaborative agreement with the Worldwide Responsible Accredited Production (WRAP).

IHKIB, representing 80% of Türkiye's apparel exports, aims to facilitate and guide its members in navigating new markets and staying abreast of sectoral developments.
WRAP, a US-based non-profit organization, focuses on promoting safe, lawful, humane, and ethical working conditions within the textile and apparel industry.

In a move to enhance the global competitiveness of the Turkish apparel industry, the Istanbul Apparel Exporters' Association (IHKIB) has entered into a collaborative agreement with the Worldwide Responsible Accredited Production (WRAP).

IHKIB, representing 80% of Türkiye's apparel exports, aims to facilitate and guide its members in navigating new markets and staying abreast of sectoral developments.
WRAP, a US-based non-profit organization, focuses on promoting safe, lawful, humane, and ethical working conditions within the textile and apparel industry.

Mr. Selcuk Mehmet Kaya, Chairman of the International Relations and Sustainability Committee of IHKIB, and Mr. Avedis Seferian, President and CEO of WRAP, officially inked a collaboration agreement on March 8, 2024, marking a significant step towards fostering business relations between Türkiye and the USA. The agreement focuses on a pilot project developed by IHKIB and WRAP, aiming to identify leading Turkish apparel companies exporting to the USA and encouraging these facilities to attain WRAP certification. In return, WRAP will provide in-person and virtual training at no charge to guide these facilities through the certification process. The project seeks to strengthen business ties between Türkiye and the USA, creating additional opportunities for mutual cooperation between the parties in both countries.

Source:

IHKIB - Istanbul Apparel Exporters’ Association

13.03.2024

Rieter: Successful financial year 2023

  • Sales of CHF 1 418.6 million in the 2023 financial year
  • Order intake of CHF 541.8 million in the 2023 financial year; order backlog of around CHF 650 million as of December 31, 2023
  • EBIT margin of 7.2%
  • “Next Level” performance program on track
  • Proposed dividend of CHF 3.00 per share
  • Outlook 2024 with sales of around CHF 1 billion

The Rieter Group closed the 2023 financial year with slightly lower sales of CHF 1 418.6 million (2022: CHF 1 510.9 million), down 6% on the previous year. In line with expectations, the order intake of CHF 541.8 million was considerably below the prior year period (2022: CHF 1 157.3 million). In a challenging business environment, Rieter generated an EBIT margin of 7.2%. Implementation of the “Next Level” performance program to increase profitability is proceeding according to plan.

  • Sales of CHF 1 418.6 million in the 2023 financial year
  • Order intake of CHF 541.8 million in the 2023 financial year; order backlog of around CHF 650 million as of December 31, 2023
  • EBIT margin of 7.2%
  • “Next Level” performance program on track
  • Proposed dividend of CHF 3.00 per share
  • Outlook 2024 with sales of around CHF 1 billion

The Rieter Group closed the 2023 financial year with slightly lower sales of CHF 1 418.6 million (2022: CHF 1 510.9 million), down 6% on the previous year. In line with expectations, the order intake of CHF 541.8 million was considerably below the prior year period (2022: CHF 1 157.3 million). In a challenging business environment, Rieter generated an EBIT margin of 7.2%. Implementation of the “Next Level” performance program to increase profitability is proceeding according to plan.

Outlook 2024
Markets remain under pressure from the economic slowdown, high inflation rates and noticeably dampened consumer sentiment. Customers are reluctant to place orders due to financing challenges. The first signs of a recovery in the 2024 financial year have emerged in the key markets of China and India. Rieter expects demand to increase in the coming months.
For the full year 2024, Rieter anticipates sales in the region of CHF 1 billion and a positive EBIT margin of up to 4%.

Source:

Rieter Management AG

(c) GFA and PDS Ventures
13.03.2024

GFA and PDS Ventures: Funding programme for fashion innovation

Global Fashion Agenda (GFA) has collaborated with PDS Ventures to launch a new Trailblazer Programme. The new initiative seeks to identify early-stage innovators and support them on their journey to scale.

Global Fashion Agenda (GFA) has collaborated with PDS Ventures to launch a new Trailblazer Programme. The new initiative seeks to identify early-stage innovators and support them on their journey to scale.

As part of the Trailblazer Programme, PDS Ventures will award one innovator a significant investment of up to USD 200,000* to accelerate the company’s growth and positive impact in the fashion industry. The winner will also receive commercial and operational support from PDS Group’s Positive Materials - a textile company and strategic research partner supporting the development and acceleration of low impact textile innovation through collaboration between early-stage start-ups, supply chain partners and brands. Further scaling opportunities will be gained through access to PDS Limited’s extensive global supply chain.
 
GFA and PDS Ventures are presenting an open call for solution providers addressing different challenges across the fashion value chain to apply for the programme. Applicants will be reviewed and shortlisted by an esteemed Jury including representatives from GFA, PDS Ventures, Massachusetts Institute of Technology (MIT), Ralph Lauren Corporation, Fashion For Good and H&M Group. Eight shortlisted innovations will be enrolled in a group of Trailblazers, receiving feedback and investment pitch training from industry experts and PDS representatives.     
 
Each shortlisted innovator will then pitch for a potential investment, with the winning Trailblazer being revealed at GFA’s Global Fashion Summit: Copenhagen Edition 2024 - an international forum for sustainability in fashion, on 22-23 May at the Copenhagen Concert Hall. All shortlisted Trailblazers will also have the opportunity to showcase their businesses within an exhibit at the Summit to connect with other key industry stakeholders and potential investors.
 
The Trailblazer Programme corresponds with the theme of the upcoming Global Fashion Summit - ‘Unlocking The Next Level’. Inspired by a significant milestone, 2024 marks 15 years since the inaugural Global Fashion Summit was hosted in 2009. This pivotal anniversary offers a special moment to not only take stock of the evolution of the sector and the progress made so far, but, most importantly, look ahead at what actions must urgently be implemented in the near term, and the gaps that must be filled to accelerate industry transformation.

Source:

Global Fashion Agenda

adidas: Y-3 and Real Madrid launch Travel Collection (c) adidas AG
08.03.2024

adidas: Y-3 and Real Madrid launch Travel Collection

Having recently celebrated the club’s 120th anniversary with a special kit for the 2021/2022 season, this year, Y-3 and Real Madrid have come together once again to bring Yohji Yamamoto’s perspective to the club with a seven-piece travel collection.

Inspired by the signature monochromatic color palette of both Real Madrid and Y-3, the travel collection itself consists of a sleek and elegant selection of pieces in all black. Crafted at the intersection of tailoring and athletic-wear, the suite of pieces includes a short sleeve polo, a long sleeve polo, a pair of shorts, a pair of track pants, a track top, a coach jacket, and a premium faux leather jacket – each made with soft sporting fabrics and finished with collaborative details such as Yohji Yamamoto’s recognizable handwritten signature script wordmark and the Real Madrid crest.

Accompanying the launch of the travel collection is a campaign shot by trailblazing London-based photographer Gabriel Moses featuring past and present Real Madrid icons including Naomie Feller, Jude Bellingham, David Alaba, Misa Rodríguez, and Zinedine Zidane.

Having recently celebrated the club’s 120th anniversary with a special kit for the 2021/2022 season, this year, Y-3 and Real Madrid have come together once again to bring Yohji Yamamoto’s perspective to the club with a seven-piece travel collection.

Inspired by the signature monochromatic color palette of both Real Madrid and Y-3, the travel collection itself consists of a sleek and elegant selection of pieces in all black. Crafted at the intersection of tailoring and athletic-wear, the suite of pieces includes a short sleeve polo, a long sleeve polo, a pair of shorts, a pair of track pants, a track top, a coach jacket, and a premium faux leather jacket – each made with soft sporting fabrics and finished with collaborative details such as Yohji Yamamoto’s recognizable handwritten signature script wordmark and the Real Madrid crest.

Accompanying the launch of the travel collection is a campaign shot by trailblazing London-based photographer Gabriel Moses featuring past and present Real Madrid icons including Naomie Feller, Jude Bellingham, David Alaba, Misa Rodríguez, and Zinedine Zidane.

More information:
adidas Y-3
Source:

adidas AG

BVMed: Umfrage zur Stärkung der deutschen Wirtschaft (c) BVMed
08.03.2024

BVMed: Umfrage zur Stärkung der deutschen Wirtschaft

Der Abbau von Bürokratie, die Förderung des Mittelstands und die Senkung der Energiesteuern sind für die Deutschen die überragenden Themen, um die Wirtschaft zu entlasten. Das ergab eine repräsentative Befragung des Meinungsforschungsunternehmens Civey im Auftrag des Bundesverbandes Medizintechnologie (BVMed). „Der Wirtschaftsstandort Deutschland verliert im internationalen Wettbewerb an Boden. Wir müssen jetzt gegensteuern und geeignete Maßnahmen ergreifen, um insbesondere die stark mittelständisch geprägte Medizintechnik-Branche zu fördern und von Bürokratie zu entlasten. Dafür hat die Bevölkerung ein gutes Gespür“, kommentiert BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll.

Der Abbau von Bürokratie, die Förderung des Mittelstands und die Senkung der Energiesteuern sind für die Deutschen die überragenden Themen, um die Wirtschaft zu entlasten. Das ergab eine repräsentative Befragung des Meinungsforschungsunternehmens Civey im Auftrag des Bundesverbandes Medizintechnologie (BVMed). „Der Wirtschaftsstandort Deutschland verliert im internationalen Wettbewerb an Boden. Wir müssen jetzt gegensteuern und geeignete Maßnahmen ergreifen, um insbesondere die stark mittelständisch geprägte Medizintechnik-Branche zu fördern und von Bürokratie zu entlasten. Dafür hat die Bevölkerung ein gutes Gespür“, kommentiert BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll.

Gefragt nach geeigneten Maßnahmen zur Stärkung der deutschen Wirtschaft nennen 84 Prozent der Deutschen den Abbau von Bürokratie, 62 Prozent die Förderung des Mittelstandes und 60 Prozent die Senkung der Energiesteuern. 41 Prozent sprechen sich für eine bessere Förderung von Innovationen und 33 Prozent für die Senkung der Unternehmenssteuern aus. Es folgen der Ausbau der steuerlichen Forschungsförderung (22 Prozent), die Stärkung der Gesundheitswirtschaft (21 Prozent) und ein erleichterter Zugriff auf Forschungsdaten (15 Prozent).

Während die Werte bei Frauen und Männer sowie Ost- und West-Deutschen ähnlich hoch sind, unterscheiden sich die Antworten nach Altersgruppen sehr stark. Die mit Abstand höchsten Werte gibt es in der Bevölkerungsgruppe zwischen 30 und 39 Jahren. Hier wünschen sich beispielsweise 58 Prozent eine bessere Förderung von Innovationen. Den höchsten Wert zum Abbau von Bürokratie gibt es bei Arbeiter:innen mit 92 Prozent und Beamt:innen mit 87 Prozent.

Der BVMed fordert seit langem ein zwischen Wirtschafts-, Forschungs- und Gesundheitspolitik abgestimmtes Maßnahmenpaket zur im Koalitionsvertrag von 2021 vorgesehenen Stärkung des Medizintechnik-Standorts Deutschlands. Zu den Forderungen des deutschen Medizintechnik-Verbandes gehören eine beauftragte Person der Bundesregierung für die industrielle Gesundheitswirtschaft, eine Stärkung der Resilienz und der Lieferketten, ein Belastungsmoratorium und Entbürokratisierungs-Offensive für die KMU-geprägte Branche, Fast-Track-Verfahren für Innovationen mit klaren Fristen sowie einfache Anerkennungsverfahren für benötigte Fachkräfte.

Source:

BVMed | Bundesverband Medizintechnologie e.V.

05.03.2024

Denim Expert's Goal: 100% wastewater recycling

The announcement of a new effluent treatment plant (ETP) marks a milestone in Denim Expert's journey towards sustainability. This upcoming facility is a testament to the company's dedication to reducing its ecological footprint and safeguarding local ecosystems through advanced water management techniques.

The new Effluent Treatment Plant (ETP) being developed by Denim Expert strives for 100% wastewater recycling. As the ETP rises from concept to reality, Denim Expert embarks on a transition towards its next horizon: aligning with the Zero Discharge of Hazardous Chemicals (ZDHC) Wastewater Guidelines Version 2.0.

The announcement of a new effluent treatment plant (ETP) marks a milestone in Denim Expert's journey towards sustainability. This upcoming facility is a testament to the company's dedication to reducing its ecological footprint and safeguarding local ecosystems through advanced water management techniques.

The new Effluent Treatment Plant (ETP) being developed by Denim Expert strives for 100% wastewater recycling. As the ETP rises from concept to reality, Denim Expert embarks on a transition towards its next horizon: aligning with the Zero Discharge of Hazardous Chemicals (ZDHC) Wastewater Guidelines Version 2.0.

Denim Expert's proactive approach to sustainability has been recognized on a global scale. The company has been named 'New Champion' by the World Economic Forum and has partnered with organizations such as the Sustainable Apparel Coalition (SAC), the United Nations Framework Convention on Climate Change (UNFCCC), and the Ellen MacArthur Foundation's Jeans Redesign program. As one of the first factories to join the Partnership for Cleaner Textile (PaCT) and in the process of implementing the 3E program, Denim Expert is dedicated to achieving 100% water reuse and full reliance on solar energy, further solidifying its commitment to driving positive environmental change.

05.03.2024

Over 330 exhibitors at Intertextile Shanghai Home Textiles

From 6 – 8 March 2024, over 330 exhibitors from seven countries and regions will convene at of Intertextile Shanghai Home Textiles – Spring Edition to highlight a variety of home textile products. Buyers will be able to source the latest bedding, duvets, pillows, towels, carpets, rugs and many more.

Highlighted exhibitors

From 6 – 8 March 2024, over 330 exhibitors from seven countries and regions will convene at of Intertextile Shanghai Home Textiles – Spring Edition to highlight a variety of home textile products. Buyers will be able to source the latest bedding, duvets, pillows, towels, carpets, rugs and many more.

Highlighted exhibitors

  • Bedding – GSI Creos Corporation, Jjiangyin Hongliu Bedsheet Co Ltd, Zhejiang Eider Warmth New Material Co Ltd
  • Down – Anhui Million Feather Co Ltd, Hangzhou Gaga Home Textiles Co Ltd, Shanghai Donglong Home Textile Products Co Ltd
  • Functional pillow & mattress – Changshu Dafa Warp Knitting Co Ltd, Chuzhou Bray Smart Home Appliances Co Ltd, Zhangjiagang Coolest Life Technology
  • Floor – Amore Textile (Suzhou) Co Ltd, Jingyi Fur Products Co Ltd, Shaoxing Jiaohui Home Textile Co Ltd
  • Quilt fillings – Pujiang Boyue Home Textile Co Ltd, Pujiang Huayu Hometextile Co Ltd
  • Textile design – Tela’s Design Lda
  • Towelling – Nantong Dadong Co Ltd, Sunvim Group Co Ltd
  • Loungewear & bath – Suzhou Huazhong Knitting Co Ltd, Zhejiang Demu Textile Technology Co Ltd
  • Upholstery fabrics – Changshu Xinghan Hometextiles Co Ltd, Jiangsu First Home Textile Co Ltd, Shaoxing Chengchong Imp & Exp Co Ltd
  • Home textile technologies – Nantong Mingxing Science & Technology Development Co Ltd, Sichuan Chnki Sewing Machine Co Ltd

Fringe programme
Complementing the exhibitor lineup, Intertextile Shanghai Home Textiles will feature events to keep attendees up-to-date with emerging developments, trends, and important intuition.
For example, one of the most essential yet often overlooked foundations for sustaining wellness is quality sleep. Throughout day one and two at the Bedding Seminar Area, sleep technology will again be a key topic of discussion, guaranteeing comprehensive insights on sleep quality while tapping into associated business prospects.
Traditional Chinese medicine will also take the spotlight, with talks linking various health issues to remedies. Crossover subjects include topical therapy’s role in a better night’s sleep as well as innovations blending medicinal properties with textile design.
An increasing number of people are choosing to use natural materials and green textiles for their bedrooms and throughout their homes. For this reason, the seminars falling under the "Textiles & Technology" theme will shed light on sustainability and what’s next in the industry.

Source:

Messe Frankfurt (HK) Ltd

Borealis celebrates 30th anniversary (c) Borealis
05.03.2024

Borealis celebrates 30th anniversary

Borealis is commemorating its thirtieth year of operations. Born of a merger between Statoil and Neste, Borealis has expanded from its early Nordic roots to become one of the top polyolefins players. Its dedication to value creation through innovation has produced proprietary and transformative technologies which benefit society and accelerate the transition to a circular economy. The company is regularly ranked as Austria's top innovator in the European Patent Index and holds an extensive patent portfolio of around 8,900 granted patents. In Europe in particular, Borealis has for decades bolstered the industrial landscape by investing in its capital assets, and by providing thousands of jobs.

Borealis is commemorating its thirtieth year of operations. Born of a merger between Statoil and Neste, Borealis has expanded from its early Nordic roots to become one of the top polyolefins players. Its dedication to value creation through innovation has produced proprietary and transformative technologies which benefit society and accelerate the transition to a circular economy. The company is regularly ranked as Austria's top innovator in the European Patent Index and holds an extensive patent portfolio of around 8,900 granted patents. In Europe in particular, Borealis has for decades bolstered the industrial landscape by investing in its capital assets, and by providing thousands of jobs.

Innovations
Borealis uses technological innovation to add value to polyolefin-based applications, ensure that production processes are made more resource efficient, and to accelerate plastics circularity. Borstar®, the multi-modal proprietary technology for the manufacture of polyethylene (PE) and polypropylene (PP), has been a mainstay of Borealis success since the start-up of the first Borstar PE plant in Porvoo, Finland in 1995. Borstar has since been joined by other technology brands, like Borlink™, an innovation for the power cable industry; Borstar® Nextension Technology, an innovation that among other benefits facilitates the production of monomaterial applications designed for recycling; or the Borcycle™ M technology for mechanical recycling, which breathes new life into polyolefin-based, post-consumer waste, transforming it into applications with a lower carbon footprint.

Global Expansion
With the strong support of its two majority shareholders OMV (Austria) and The Abu Dhabi National Oil Company (ADNOC, UAE), Borealis continues to expand its global footprint. The joint venture Borouge, established in 1998 in the UAE, and listed on the Abu Dhabi Securities Exchange (ADX) since 2022, is one of the largest integrated polyolefin complexes. It is currently the site of the company’s largest-ever growth project: Borouge 4, the new USD 6.2 billion facility in Ruwais, which will serve customers in the Middle East and Asia. In North America, the Baystar™ joint venture, founded in 2017 and operated with partner TotalEnergies, entailed the construction of a new ethane cracker as well as the most advanced Borstar plant ever built outside of Europe. The PE Borstar 3G plant in Pasadena, Texas was started up in late 2023 and has brought Borstar to this continent for the first time. Borealis’ commitment to Europe as a production location is evidenced by the new, world-scale propane dehydrogenation (PDH) plant currently under construction at Borealis operations in Kallo, Belgium.

More information:
Borealis polyolefins Recycling
Source:

Borealis

01.03.2024

Re:NewCell’s bankruptcy application approved

Re:NewCell AB announced that the Stockholm District Court has decided to approve the previously communicated bankruptcy application and has declared the company bankrupt.

The appointed bankruptcy trustee is lawyer Lars-Henrik Andersson at Cirio Advokatbyrå.

February,25 the Board of Directors had decided to file for bankruptcy of Re:NewCell AB at the Stockholm District Court. The reason for the decision to file for bankruptcy was that Re:NewCell has not been able to secure sufficient financing to complete the strategic review, announced on 20 November 2023, with satisfactory result.

As part of the strategic review, Re:NewCell has had well advanced negotiations with its two largest shareholders, H&M and Girindus, its existing lenders BNP Paribas, European Investment Bank, Finnvera (as partial guarantor), Nordea, AB Svensk Exportkredit and potential new investors as well as other stakeholders regarding long-term financing solutions. These discussions have not resulted in a solution which would provide Re:NewCell with the necessary liquidity and capital to ensure its operations going forward.

Re:NewCell AB announced that the Stockholm District Court has decided to approve the previously communicated bankruptcy application and has declared the company bankrupt.

The appointed bankruptcy trustee is lawyer Lars-Henrik Andersson at Cirio Advokatbyrå.

February,25 the Board of Directors had decided to file for bankruptcy of Re:NewCell AB at the Stockholm District Court. The reason for the decision to file for bankruptcy was that Re:NewCell has not been able to secure sufficient financing to complete the strategic review, announced on 20 November 2023, with satisfactory result.

As part of the strategic review, Re:NewCell has had well advanced negotiations with its two largest shareholders, H&M and Girindus, its existing lenders BNP Paribas, European Investment Bank, Finnvera (as partial guarantor), Nordea, AB Svensk Exportkredit and potential new investors as well as other stakeholders regarding long-term financing solutions. These discussions have not resulted in a solution which would provide Re:NewCell with the necessary liquidity and capital to ensure its operations going forward.

"I regret to inform that we have been forced to take this decision to file for bankruptcy. As we have a strong belief in the company’s long-term potential, we have together with our advisors spent very substantial time and efforts into trying to secure the necessary liquidity, capital and ownership structure for the company to secure its future. As part of the negotiations, we have had intense dialogues with both current main owners, new investors and our banks, as well as other stakeholders. However, these discussions have not been successful. This is a sad day for the environment, our employees, our shareholders, and our other stakeholders, and it is a testament to the lack of leadership and necessary pace of change in the fashion industry” says Chairman of the Board of Directors, Michael Berg.

More information:
Renewcell bankruptcy
Source:

Renewcell

01.03.2024

Autoneum: New Business Unit for Commercial Vehicles

Autoneum has established a new Business Unit Commercial Vehicles to expand its existing truck business and to increase revenue and profitability in this vehicle segment as part of the Group’s strategic focus on profitable growth. To begin with, the Business Unit will focus on the commercial vehicles business in Europe and South America, as these two regions have a comparable customer base. The Business Unit is responsible for the global commercial vehicles business development, while its financial results will be consolidated within the Business Groups.

Autoneum has established a new Business Unit Commercial Vehicles to expand its existing truck business and to increase revenue and profitability in this vehicle segment as part of the Group’s strategic focus on profitable growth. To begin with, the Business Unit will focus on the commercial vehicles business in Europe and South America, as these two regions have a comparable customer base. The Business Unit is responsible for the global commercial vehicles business development, while its financial results will be consolidated within the Business Groups.

The new Business Unit focuses primarily on the business with components for medium and heavy trucks as well as agricultural commercial vehicles. Following the acquisition of Borgers Automotive in April last year, Autoneum has significantly expanded its product and technology portfolio for these vehicle segments. In combination with the Company’s global presence and diversified customer structure, this provides an ideal basis for future profitable growth. Autoneum already operates plants which manufacture products for the exterior and interior of commercial vehicles in Belgium, Czech Republic, France, Germany and Poland, as well as in Brazil. With the creation of a dedicated Business Unit Commercial Vehicles, Autoneum aims to leverage its existing production footprint in order to further grow the business worldwide.

As with the product portfolio for light vehicles, Autoneum’s multifunctional, lightweight and sustainable systems and components are suitable for commercial vehicles of all drive types. Autoneum is therefore well positioned for the expected increase in electric models due to more stringent environmental regulations.

More information:
Autoneum Automotive acoustic
Source:

Autoneum

(c) Premium Exhibitions GmbH
01.03.2024

SEEK and Berlin Fashion Week share dates

SEEK announces a new and earlier date for the upcoming Spring/Summer 2025 edition. SEEK will take place on the 2nd and 3rd of July 2024. The new platform, THE JUNCTION, connecting the neighboring UNION Showroom at Kühlaus will open its doors from the 30th of June until the 3rd of July. Berlin Fashion Week plans its shows, showrooms and events to take place from the 1st until the 4th of July. The 8th edition of the 202030 - The Berlin Fashion Summit will inform and animate on the same days as SEEK.

"The past few days we have had productive and most importantly very friendly conversations. The result: Your (the industry’s) wish is our command - for the first time Berlin Fashion Week, UNION showroom, 202030 - The Berlin Fashion Summit, THE JUNCTION and SEEK will take place at the same time. Together we want to activate: brands, stores and the city." Marie-Luise Patzelt, SEEK

SEEK announces a new and earlier date for the upcoming Spring/Summer 2025 edition. SEEK will take place on the 2nd and 3rd of July 2024. The new platform, THE JUNCTION, connecting the neighboring UNION Showroom at Kühlaus will open its doors from the 30th of June until the 3rd of July. Berlin Fashion Week plans its shows, showrooms and events to take place from the 1st until the 4th of July. The 8th edition of the 202030 - The Berlin Fashion Summit will inform and animate on the same days as SEEK.

"The past few days we have had productive and most importantly very friendly conversations. The result: Your (the industry’s) wish is our command - for the first time Berlin Fashion Week, UNION showroom, 202030 - The Berlin Fashion Summit, THE JUNCTION and SEEK will take place at the same time. Together we want to activate: brands, stores and the city." Marie-Luise Patzelt, SEEK

Source:

Premium Exhibitions GmbH

CARBIOS and Landbell Group: Collaboration for biorecycling plant (c) Landbell Group / CARBIOS
01.03.2024

CARBIOS and Landbell Group: Collaboration for biorecycling plant

CARBIOS and Landbell Group, a global operator of more than 40 producer responsibility organizations (PROs) and a provider of closed-loop recycling solutions, announce the signing of a non-binding Memorandum of Understanding for the sourcing, preparation and recycling of post-consumer PET waste using CARBIOS’ biorecycling technology at its first commercial plant in Longlaville from 2026.  

The partnership will leverage Landbell Group’s expertise and network in the sourcing of PET packaging and textile waste which will be prepared for biorecycling. Thanks to CARBIOS’ highly selective enzyme, less sorting and washing is required compared to current recycling technologies, offering future savings in energy and water use. From 2026, Landbell Group will supply CARBIOS with 15 kt/year of PET flakes, ensuring a steady supply chain for sustainable PET production. These flakes will serve as essential feedstock for CARBIOS’ production of food-grade PTA and MEG, further re-polymerized into PET.

CARBIOS and Landbell Group, a global operator of more than 40 producer responsibility organizations (PROs) and a provider of closed-loop recycling solutions, announce the signing of a non-binding Memorandum of Understanding for the sourcing, preparation and recycling of post-consumer PET waste using CARBIOS’ biorecycling technology at its first commercial plant in Longlaville from 2026.  

The partnership will leverage Landbell Group’s expertise and network in the sourcing of PET packaging and textile waste which will be prepared for biorecycling. Thanks to CARBIOS’ highly selective enzyme, less sorting and washing is required compared to current recycling technologies, offering future savings in energy and water use. From 2026, Landbell Group will supply CARBIOS with 15 kt/year of PET flakes, ensuring a steady supply chain for sustainable PET production. These flakes will serve as essential feedstock for CARBIOS’ production of food-grade PTA and MEG, further re-polymerized into PET.

Through the partnership with Landbell Group in Germany, the supply of multilayer trays through the CITEO tender in France  and the MoU with Indorama Ventures, CARBIOS will have sourced over 70% of its feedstock required for the 50kt/year capacity when its first commercial plant in Longlaville, France, will operate at full capacity. Close to the borders with Belgium, Germany and Luxembourg, the plant’s location is strategic for nearby waste supplies.

Through this partnership with CARBIOS, Landbell Group will ensure that the problematic PET fractions such as multilayered, colored and opaque trays from packaging waste and polyester textile waste are redirected towards recycling. In this way, Landbell Group strengthens its commitment to the development of recycling solutions to enable a circular economy.

26.02.2024

AkzoNobel: Full-year 2023 results

Highlights Q4 2023 (compared with Q4 2022)

  • Revenue in constant currencies up 4% on higher volumes and pricing (reported revenue -3%)
  • Operating income improved to €214 million (2022: €103 million)
  • Adjusted operating income at €221 million (2022: €126 million); ROS at 8.7% (2022: 4.8%); €244 million before €23 million negative impact from hyperinflation accounting
  • Net cash from operating activities positive €574 million (2022: €291 million)

Highlights full-year 2023 (compared with full-year 2022)

Highlights Q4 2023 (compared with Q4 2022)

  • Revenue in constant currencies up 4% on higher volumes and pricing (reported revenue -3%)
  • Operating income improved to €214 million (2022: €103 million)
  • Adjusted operating income at €221 million (2022: €126 million); ROS at 8.7% (2022: 4.8%); €244 million before €23 million negative impact from hyperinflation accounting
  • Net cash from operating activities positive €574 million (2022: €291 million)

Highlights full-year 2023 (compared with full-year 2022)

  • Revenue in constant currencies up 5% driven by pricing (reported revenue -2%)
  • Operating income improved to €1,029 million (2022: €708 million)
  • Adjusted operating income at €1,074 million (2022: €789 million), despite €77 million adverse
  • currency effects from translation; ROS at 10.1% (2022: 7.3%)
  • Adjusted EBITDA at €1,429 million (2022: €1,157 million), despite €92 million adverse currency
  • effects from translation
  • Net cash from operating activities positive €1,126 million (2022: €263 million)
  • Net debt to EBITDA leverage ratio improved to 2.7 (2022: 3.8)
  • Final dividend proposed of €1.54 per share (2022: €1.54)

Outlook mid-term
For the mid-term, AkzoNobel aims to expand profitability to deliver an adjusted EBITDA margin of above 16% and a return on investment between 16% and 19%, underpinned by organic growth and industrial excellence. The company aims to lower its leverage to around 2 times in the mid-term, while remaining committed to retaining a strong investment grade credit rating.

More information:
AkzoNobel financial year 2023
Source:

AkzoNobel

19.02.2024

Lectra: Financial statements for 2023

  • Revenues: 477.6 million euros (-6%)
  • EBITDA before non-recurring items: 79.0 million euros (-15%)
  • Net income: 32.6 million euros (-26%)
  • Free cash flow before non-recurring items: 45.3 million euros
  • Dividend: €0.36 per share

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the consolidated financial statements for the fiscal year 2023. Audit procedures have been performed by the Statutory Auditors.

Currency changes between 2022 and 2023 mechanically decreased revenues and EBITDA before non-recurring items by 3.9 million euros (-3%) and 1.7 million euros (-8%) respectively in Q4, and by 11.2 million euros (-2%) and 4.8 million euros (-6%) respectively in the year, at actual exchange rates compared to like-for-like figures.

  • Revenues: 477.6 million euros (-6%)
  • EBITDA before non-recurring items: 79.0 million euros (-15%)
  • Net income: 32.6 million euros (-26%)
  • Free cash flow before non-recurring items: 45.3 million euros
  • Dividend: €0.36 per share

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the consolidated financial statements for the fiscal year 2023. Audit procedures have been performed by the Statutory Auditors.

Currency changes between 2022 and 2023 mechanically decreased revenues and EBITDA before non-recurring items by 3.9 million euros (-3%) and 1.7 million euros (-8%) respectively in Q4, and by 11.2 million euros (-2%) and 4.8 million euros (-6%) respectively in the year, at actual exchange rates compared to like-for-like figures.

OUTLOOK
While the 2023 full-year results were affected by the adverse environment, they also attest to the substantial improvement in the fundamentals of the Group's business model, which will have a positive impact on 2024 results. Persistent macroeconomic and geopolitical uncertainties could nevertheless continue to weigh on investment decisions by the Group's customers.

While the most recent indicators seem to suggest that the situation is unlikely to deteriorate further, the timing and magnitude of a rebound in new system orders remain uncertain.

Outlook for 2024
To facilitate analysis, the accounts of Lectra excluding the Launchmetrics acquisition ("Lectra 2023 Scope") will be analysed separately from the Launchmetrics accounts in 2024.

The Group has based its 2024 objectives on the exchange rates in effect on December 29, 2023, in particular $1.10/€1. When converting 2023 results using the exchange rates retained for 2024, 2023 revenues are mechanically reduced by 4.7 million euros (to 472.9 million euros) and 2023 EBITDA before non-recurring items is reduced by 2.2 million euros (to 76.8 million euros). Thus, for the Lectra 2023 Scope, the comparisons between 2024 and 2023 printed below are based on constant exchange rates.

At this early stage of 2024, continuing low visibility regarding orders and revenues from new systems makes it impossible to predict the actual timing and scale of the future rebound in this area. On the other hand, visibility is high for recurring revenues, which accounted for 68% of total revenues in 2023 and will continue to grow in 2024.

In light of the above, Lectra has set as its objective for 2024, for the Lectra 2023 Scope, to achieve revenues in the range of 480 to 530 million euros (+2% to +12%) and EBITDA before non-recurring items in the range of 85 to 107 million euros (+10% to +40%).

The low end of the revenues range is based on the absence of a rebound in new systems orders, which would remain stable in 2024 relative to 2023, with a 6% decline in revenues from perpetual software licenses, equipment and accompanying software and non-recurring services, as the order backlog was lower on December 31, 2023 than a year before.

The high end of the revenues range reflects a gradual rebound in new systems orders, which at year-end 2024 would be back to year-end 2022 level.
 
In addition, Launchmetrics revenues (for the consolidation period from January 23 to December 31) are projected to be in the range of 42 to 46 million euros, with an EBITDA margin before non-recurring items of more than 15% (assuming an exchange rate of $1.10/€1).