From the Sector

Reset
2 results
Start of 3-years Interreg cross-border project AACOMA  is kicked-off (c) AMAC GmbH
AMAC-Standortkarte
13.05.2020

Start of 3-years Interreg cross-border project AACOMA is kicked-off

  • AACOMA - Accelerate advanced composite manufacturing
  • EMR Region Belgium, the Netherlands & Germany area hot spot for the future of lightweight materials and technologies

The Euregio Meuse-Rhine provides a huge potential with its many highly innovative, leading companies and especially SMEs which are active in the area of advanced material manufacturing in many industrial sectors, such as Automotive, Aerospace, Electronics, Building and Infrastructure, etc. The advanced material sector is growing, with a consolidated offer, ranging from raw material producers over technology development to production, research and development as well as industrial OEMs.

Interreg Euregio Meuse-Rhine invests EUR 96 million from the European Regional Development Fund (ERDF) in the period 2014-2020. Through the investments in cross-border projects, the European Union invests in the economic development, innovation, territorial development and social inclusion and education of this region.

Project

  • AACOMA - Accelerate advanced composite manufacturing
  • EMR Region Belgium, the Netherlands & Germany area hot spot for the future of lightweight materials and technologies

The Euregio Meuse-Rhine provides a huge potential with its many highly innovative, leading companies and especially SMEs which are active in the area of advanced material manufacturing in many industrial sectors, such as Automotive, Aerospace, Electronics, Building and Infrastructure, etc. The advanced material sector is growing, with a consolidated offer, ranging from raw material producers over technology development to production, research and development as well as industrial OEMs.

Interreg Euregio Meuse-Rhine invests EUR 96 million from the European Regional Development Fund (ERDF) in the period 2014-2020. Through the investments in cross-border projects, the European Union invests in the economic development, innovation, territorial development and social inclusion and education of this region.

Project

The Euregio Meuse-Rhine is a potential hot-spot for the further development of advanced material and process technologies. Technical Centers and Institutes around Aachen/Germany, Liège/Belgium and Eindhoven/The Netherlands were awarded with this new project AACOMA.

Innovative material design and advanced manufacturing provide large opportunities for SMEs. The AACOMA project kick-off took place in Aachen at the Campus of the RWTH University of technology in 1 Q 2020. The aim of the project, which is running for 3 years until 2023 with a budget of €3 Mio, is to connect SMEs with innovation hot-spots like institutes and technical centers.
Seven partners from all three regions will carry the project out: Centexbel is the project leader and gets support by University of Liège, Sirris and Flanders Make from Belgium, as well as Fontys University of Applied Science and AMIBM of Maastricht University in the Netherlands and AMAC in Germany.

Statements

Bernard Paquet, Project Coordinator from Centexbel/ Belgium stated:
“Centexbel, with a strong experience in textile and composites, will identify with its Interreg partners and an advisory board of international experts several demonstrators which will enable an accelerated advanced manufacturing of composite parts. This could include new materials and intermediates, high performance additives, bio-based products and new composites by additive manufacturing”.

Michael Effing, Managing Director of AMAC/ Germany said:
“The major goal of the project is to connect around 200 innovative SMEs with each other and establish the links to the world-class institutes in the EMR region. We will facilitate 6 roadshow events, addressing key topics like automated manufacturing, additive manufacturing or bio-based material systems combined with match making and training events. The first roadshow will be held on September 24, 2020 at the Aachen Campus of the RWTH University of Technology.”

Prof. Gunnar Seide from the AMIBM/The Netherlands continued:  
“Our AMIBM offers already an international master program on bio-based materials. The AACOMA project will be an important element for transborder research and will identify new players in the value chain coming from the EMR region. Innovative companies find markets for their new bio-based building blocks, chemicals and polymers. Their success stories and upcoming technological breakthroughs are needed for a sustainable future.”

 

12.03.2019

Recycling of Coated and Painted Textile and Plastic Materials

The EU-funded Project, in which Devan Chemicals is a key partner, held a kick off meeting end of February 2019 at the EU Commission in Brussels, Belgium. The project consortium, led by Belgian R&D centre CENTEXBEL, consists of 17 European partners from across the value chain including design, manufacturing, NGOs, and research and innovation.

The focus of the consortium is on coated and painted textiles and plastic materials which are currently not recyclable. Ambitious plastic recycling targets of 50% have been set by the European Plastics Industry, and to meet these targets, smart solutions to enable the circular use of textile and plastic parts with multi-layer coatings must be considered.

DECOAT has therefore been established to investigate triggerable smart polymer material systems and appropriate recycling processes. The solutions will be based on smart additives (like microcapsules or microwave triggered additives) that will enable the efficient of coatings and other finishes, activated by a specific trigger (heat, humidity, microwave, chemical) to permit recycling.        

The EU-funded Project, in which Devan Chemicals is a key partner, held a kick off meeting end of February 2019 at the EU Commission in Brussels, Belgium. The project consortium, led by Belgian R&D centre CENTEXBEL, consists of 17 European partners from across the value chain including design, manufacturing, NGOs, and research and innovation.

The focus of the consortium is on coated and painted textiles and plastic materials which are currently not recyclable. Ambitious plastic recycling targets of 50% have been set by the European Plastics Industry, and to meet these targets, smart solutions to enable the circular use of textile and plastic parts with multi-layer coatings must be considered.

DECOAT has therefore been established to investigate triggerable smart polymer material systems and appropriate recycling processes. The solutions will be based on smart additives (like microcapsules or microwave triggered additives) that will enable the efficient of coatings and other finishes, activated by a specific trigger (heat, humidity, microwave, chemical) to permit recycling.        

Devan’s specific role is in the development of microcapsules that will release its active core on application of a certain trigger (e.g. heat) at the end of life of the article. This active core material may be something that, for example, will promote the detachment of different coating layers (by separating them), opening the possibility for recyclability/re-use of the base materials. Different active core ingredients will be evaluated, and Devan will develop processes for each type of core ingredient and for each type of coating layer/matrix.

The bold aim of the four-year project is to decrease landfill by 75% of coated articles that are presently difficult to recycle, such as clothing, electronic goods and automotive components. A reduction in the carbon footprint by at least 30% for the considered products is aimed for. By enabling the recycling of such materials, DECOAT is expected to generate in the medium term a new market valued at over 150 million Euros in Europe.

More information:
Devan Chemicals NV Devan
Source:

Marketing Solutions NV