From the Sector

Reset
10 results
Messestand Foto: Messe Frankfurt / Jean-Luc Valentin
19.03.2024

Neues Techtextil Areal Nature Performance

In allen Anwendungsfeldern technischer Textilien und textiler Technologien gewinnt der Aspekt Nachhaltigkeit wachsende Bedeutung. Anlass für die internationale Leitmesse Techtextil für ihre Veranstaltung im April 2024 darauf einen besonderen Fokus zu setzen.

In allen Anwendungsfeldern technischer Textilien und textiler Technologien gewinnt der Aspekt Nachhaltigkeit wachsende Bedeutung. Anlass für die internationale Leitmesse Techtextil für ihre Veranstaltung im April 2024 darauf einen besonderen Fokus zu setzen.

Ob biobasierte, recycelte oder abbaubare Materialien, Kreislaufwirtschaft oder regeneratives Design: Die Entwicklung nachhaltiger Lösungen in der Textilindustrie schreitet zügig voran. Nachhaltige Produkte und Verfahren stehen heute in der Performance ihren herkömmlichen Konkurrenten in nichts nach und rechnen sich zunehmend auch ökonomisch. Mehr als 15 Prozent der Aussteller auf der Techtextil haben bereits natürliche Fasern und Materialien in ihrem Sortiment.
 
Auf dem Areal „Nature Performance“ in der Halle 9.1, Produktsegment Fibres & Yarns, präsentieren die teilnehmenden Aussteller alternative, recyclingfähige und nachhaltige Materialien, die über zukunftsfähige funktionale Eigenschaften verfügen. Das Spektrum reicht von Naturfasern und -Materialien bis zu biobasierten Fasern und Materialien. Im Zentrum der Ausstellerpräsentationen steht deren Performance für die verschiedensten Anwendungsbereiche von der Architektur, Bau, Mobilität und Medizin bis zur Bekleidungsindustrie.

Das Areal Nature Performance ist Teil des Econogy Angebots, das die Messe Frankfurt für ihre weltweiten Textilveranstaltungen eingeführt hat. Das neue Label fasst die zahlreichen Netzwerk- und Informationsformate zum Thema Nachhaltigkeit zusammen und schafft Transparenz durch einheitliche Bewertungskriterien. Der Begriff Econogy steht für die untrennbare Verbindung zwischen Ökonomie und Ökologie und gibt damit die Ausrichtung des zukunftsweisenden Leitthemas an.

Source:

Messe Frankfurt

ANDRITZ: New spunlace pilot line for natural and recycled fibers Photo: ANDRITZ
New ANDRITZ carding machine dedicated to natural and recycled fibers in the ANDRITZ Perfojet technical center in Montbonnot, France
07.07.2023

ANDRITZ: New spunlace pilot line for natural and recycled fibers

International technology group ANDRITZ has installed a new spunlace pilot line at its center of competence in Montbonnot, France. It allows customers and partners to conduct trials for producing nonwovens from recycled and/or natural fibers such as hemp, flax, and cotton.

The new pilot line features optimized web forming and entanglement for smooth processing of sensitive and irregular fibers. The innovative card set-up is designed to protect and maintain the quality of the fibers while achieving outstanding productivity rates.

Another special feature of this pilot line is the integrated ANDRITZ Metris digitalization system. It allows the operators to collect and analyze all useful data about the line’s capacity and performance. This is a perfect tool for optimizing costs, saving time and predicting maintenance.

International technology group ANDRITZ has installed a new spunlace pilot line at its center of competence in Montbonnot, France. It allows customers and partners to conduct trials for producing nonwovens from recycled and/or natural fibers such as hemp, flax, and cotton.

The new pilot line features optimized web forming and entanglement for smooth processing of sensitive and irregular fibers. The innovative card set-up is designed to protect and maintain the quality of the fibers while achieving outstanding productivity rates.

Another special feature of this pilot line is the integrated ANDRITZ Metris digitalization system. It allows the operators to collect and analyze all useful data about the line’s capacity and performance. This is a perfect tool for optimizing costs, saving time and predicting maintenance.

With the new line, the ANDRITZ Nonwoven team now operates two spunlace pilot lines at the Montbonnot technical center. The first line has optimized processes, for instance WetlaceTM, for processing various synthetic and man-made fibers. ANDRITZ process experts ensure that advanced technology and know-how are available under one roof at Montbonnot.

Source:

ANDRITZ AG

(c) Carsten Fulland, Zenvision
Finale Struktur als Buckyball mit den entwickelten Knoten und Pultrusions-Profilen
18.05.2023

DITF: Bioverbundwerkstoff auf der Architektur-Biennale

Die diesjährige Architektur-Biennale in Venedig sieht sich als „Laboratory of the Future“. Bioverbundwerkstoffe sind in der Architektur nicht nur Zukunftsmusik. Die Deutschen Institute für Textil- und Faserforschung (DITF) haben einen nachhaltigen Werkstoff für Stützprofile und Verbindungsknoten entwickelt, die während der Biennale vom 20. Mai bis 26. November im Palazzo Mora ausgestellt werden. Die ultraleichten Bauteile sind das Ergebnis eines Gemeinschaftsprojekts von Partnern aus Forschung und Industrie, das vom Bundesministerium für Ernährung und Landwirtschaft gefördert wurde. Sie werden zukünftig im Bereich der mobilen Architektur und bei Pavillons und Architekturen mit geringer Traglast eingesetzt.

Die DITF hatten die Aufgabe, für den Bioverbundwerkstoff geeignete Materialen auszuwählen und Fertigungsprozesse zu entwickeln. Um einen möglichst hohen Bioanteil zu erreichen, wurden Hanf- und Flachsfasern sowie ein Harzsystem verwendet, das auf epoxidiertem Leinsamenöl basiert. Diese natürlichen Ressourcen wurden sowohl im Pultrusionsverfahren als auch im Heißpressverfahren eingesetzt.

Die diesjährige Architektur-Biennale in Venedig sieht sich als „Laboratory of the Future“. Bioverbundwerkstoffe sind in der Architektur nicht nur Zukunftsmusik. Die Deutschen Institute für Textil- und Faserforschung (DITF) haben einen nachhaltigen Werkstoff für Stützprofile und Verbindungsknoten entwickelt, die während der Biennale vom 20. Mai bis 26. November im Palazzo Mora ausgestellt werden. Die ultraleichten Bauteile sind das Ergebnis eines Gemeinschaftsprojekts von Partnern aus Forschung und Industrie, das vom Bundesministerium für Ernährung und Landwirtschaft gefördert wurde. Sie werden zukünftig im Bereich der mobilen Architektur und bei Pavillons und Architekturen mit geringer Traglast eingesetzt.

Die DITF hatten die Aufgabe, für den Bioverbundwerkstoff geeignete Materialen auszuwählen und Fertigungsprozesse zu entwickeln. Um einen möglichst hohen Bioanteil zu erreichen, wurden Hanf- und Flachsfasern sowie ein Harzsystem verwendet, das auf epoxidiertem Leinsamenöl basiert. Diese natürlichen Ressourcen wurden sowohl im Pultrusionsverfahren als auch im Heißpressverfahren eingesetzt.

Die Verarbeitung von Naturfasern zu leistungsstarken Produkten ist anspruchsvoll, weil diese dicker, ungleichmäßiger, feuchter und auch empfindlicher sind als Hochleistungsfasern aus Glas, Carbon oder Aramid. Bisher wurden Naturfasern zum überwiegenden Teil mit erdölbasierten Harzen oder Harzen mit einem sehr geringen Bioanteil in der Pultrusion verarbeitet. Die daraus hergestellten Verbünde erreichten keine ausreichende Faser- Matrixhaftung, weshalb die mechanischen Eigen-schaften unbefriedigend waren. An den DITF konnten diese material- und prozessbedingten Probleme weitgehend gelöst werden. Hierbei war beispielsweise die Vortrocknung der Naturfaser-Rovings in der Pultrusion ein entscheidender Lösungsweg. Was bei den DITF im Labormaßstab gelang, ließ sich auch im Industriemaßstab umsetzen. Für den LightPRO Shell Pavillon, den Buckyball und für die Biennale-Ausstellung produzierte der Projektpartner CG-TEC insgesamt 800 Meter Rohrprofil, die als Stützelement verwendet wurden. Für den Knoten, der die Stützprofile verbindet, haben die Projektpartner ein Design entworfen, nach dessen Vorlage ein passendes Formwerkzeug für das Heißpressverfahren gefertigt wurde. Zum Projektende wurden an den DITF mit diesem Formwerkzeug über 60 Verbindungsknoten für den Buckyball hergestellt, von dem man jetzt einen Ausschnitt in Venedig besichtigen kann.

Praxistests haben gezeigt, dass der an den DITF entwickelte Bioverbundwerkstoff für vielfältige Anwendungen in der Architektur geeignet ist. Im Vergleich zu Glasfaserkunststoffen splittern Bioverbundwerkstoffe bei einem Crash nicht. Zudem sind sie ein nachhaltiger Baustoff. Sie verbrauchen bei ihrer Herstellung viel weniger Energie und binden langfristig eine große Menge Kohlenstoff. Sie bringen aufgrund ihrer geringen Dichte wenig Gewicht auf die Waage und sind daher für viele Anwendungen im Leichtbau geeignet. Ziel des Leichtbaus ist es, Rohstoffe, Energie und damit Kosten zu sparen. Der Einsatz von Bioverbundwerkstoffen bietet der Bauindustrie ein hohes Potenzial, neue ressourcenschonende Wege zu gehen.

Das Forschungsprojekt LeichtPRO wurde von der Fachagentur für Nachwachsende Rohstoffe (FNR) im Auftrag des Bundesministeriums für Ernährung und Landwirtschaft gefördert.

Foto: INNATEX – Internationale Fachmesse für nachhaltige Textilien
02.08.2022

50. INNATEX: Internationale Fachmesse für Green Fashion sieht erste Erholungszeichen

Die 50. INNATEX schloss am 31. Juli mit einem besseren Ergebnis, als viele Beteiligte erwartet hatten. Die Order und Publikumszahlen lagen zwar noch unter den Werten, die vor Corona als Standard galten, aber die Kurven steigen wieder und die Atmosphäre war so ausgelassen, wie man es bis 2019 von der internationalen Fachmesse für Naturtextilien kannte. Ein großer Teil der Labels und Institutionen berichtet von steigenden Reichweiten. All das unterstreicht die steigende Relevanz von Nachhaltigkeit in der Mode.

Rückkehr zur Naturfaser – am besten biozertifiziert
Zu den Trendthemen der Green-Fashion-Branche auf der INNATEX zählten Kreislaufwirtschaft, Naturfasern wie Leinen und Hanf, Pastellfarben und Transparenz entlang der Lieferketten. Die vom Deutschen Nachhaltigkeitspreis ausgezeichnete Online-Plattform Retraced bietet blockchain-basierte Lösungen für die Nachvollziehung bis zur Ressource. Axel Kolonko repräsentierte das Startup als einer von sieben Expert:innen in der erstmaligen Community Area und berichtete von hohem Interesse.

Die 50. INNATEX schloss am 31. Juli mit einem besseren Ergebnis, als viele Beteiligte erwartet hatten. Die Order und Publikumszahlen lagen zwar noch unter den Werten, die vor Corona als Standard galten, aber die Kurven steigen wieder und die Atmosphäre war so ausgelassen, wie man es bis 2019 von der internationalen Fachmesse für Naturtextilien kannte. Ein großer Teil der Labels und Institutionen berichtet von steigenden Reichweiten. All das unterstreicht die steigende Relevanz von Nachhaltigkeit in der Mode.

Rückkehr zur Naturfaser – am besten biozertifiziert
Zu den Trendthemen der Green-Fashion-Branche auf der INNATEX zählten Kreislaufwirtschaft, Naturfasern wie Leinen und Hanf, Pastellfarben und Transparenz entlang der Lieferketten. Die vom Deutschen Nachhaltigkeitspreis ausgezeichnete Online-Plattform Retraced bietet blockchain-basierte Lösungen für die Nachvollziehung bis zur Ressource. Axel Kolonko repräsentierte das Startup als einer von sieben Expert:innen in der erstmaligen Community Area und berichtete von hohem Interesse.

Die Pandemie und andere Problematiken sorgen für Planungsunsicherheiten
Aktuelle Themen und Herausforderungen, die bei den Lounge Talks in der Community Area und in der Messehalle besprochen wurden, gab es viele. Dazu zählen bevorstehende EU-Maßnahmen wie der Product Environmental Footprint, so Heike Hess vom Internationalen Verband der Naturtextilwirtschaft (IVN) und Schirmherr der INNATEX.

„Ein weiterer Aspekt ist die Engpass-Situation bei der Beschaffung,“ sagt Hess. „Das liegt an gestörten Lieferketten unter anderem durch Corona, Klimawandel und der internationalen politischen Krise, die der Krieg hervorruft. Die Knappheit für kleinere, konsequente Naturtextiler verschärft sich noch, weil große Konzerne auf den Nachhaltigkeitszug aufspringen und mit ihren Bestellmengen Vorrang haben. Für die daraus resultierende Planungsunsicherheit diskutieren wir derzeit Lösungen, darunter die strategische Netzwerkbildung, die Sicherung von Biofasern und Erschließung neuer Märkte durch globale Anbauprojekte.“

Alexander Hitzel, Projektleiter der INNATEX, resümiert: „Pandemie, Beschaffung, Inflation, steigende Energiepreise – es lässt sich einfach nicht voraussagen, was die nachhaltige Modeindustrie und andere Branchen in den nächsten Monaten erwartet, da muss man ehrlich sein. Aber diese 50. INNATEX gibt uns Zuversicht, dass Green Fashion wieder auf der Erfolgskurve ist.“

Die nächste INNATEX findet vom 21. bis 23. Januar 2023 statt.

(c) ANDRITZ AG
ANDRITZ neXline Spunlace eXcelle Line
09.11.2021

ANDRITZ to supply a high-speed spunlace line to Welspun, India

International technology group ANDRITZ has received an order from Welspun Advanced Materials, India, to deliver a complete neXline spunlace line for the production of nonwoven roll goods and wipes for their new plant in Hyderabad, Telangana. The line has a capacity of up to three tons per hour. Start-up of the line is scheduled for the fourth quarter of 2021.

The ANDRITZ high-capacity spunlace line will process various types of synthetic or natural fibers, such as polyester, viscose and cotton. The final products will have fabric weights ranging from 25 to 120 gsm, thus covering many applications. This neXline spunlace line also offers the option to integrate a third component from a selection of smart layers, enabling Welspun to also manufacture products for the health care and hygiene sectors.

International technology group ANDRITZ has received an order from Welspun Advanced Materials, India, to deliver a complete neXline spunlace line for the production of nonwoven roll goods and wipes for their new plant in Hyderabad, Telangana. The line has a capacity of up to three tons per hour. Start-up of the line is scheduled for the fourth quarter of 2021.

The ANDRITZ high-capacity spunlace line will process various types of synthetic or natural fibers, such as polyester, viscose and cotton. The final products will have fabric weights ranging from 25 to 120 gsm, thus covering many applications. This neXline spunlace line also offers the option to integrate a third component from a selection of smart layers, enabling Welspun to also manufacture products for the health care and hygiene sectors.

Welspun is the largest global exporter of home textiles. Innovation and quality lie at the heart of the company’s success, which already has nonwoven production lines in operation, including needlepunch and spunlace equipment. With its new plant in Telangana, Welspun will significantly increase its existing spunlace capacity and also maintain a broad range of applications as the final products are used in hygiene, home care and industrial cleaning. The new, advanced facility is a 100,000 sqm greenfield development that is part of a larger 1,500,000 sqm industrial complex also accommodating the Welspun floorings facility.

Source:

ANDRITZ AG

ANDRITZ receives order for an elliptical cylinder pre-needler (c) ANDRITZ
Elliptical cylinder pre-needler during assembly
19.04.2021

ANDRITZ receives order for an elliptical cylinder pre-needler

International technology Group ANDRITZ has received an order from Amarande SAS to supply an elliptical cylinder pre-needler for their plant in Lussac les Châteaux, France. This machine will process shoddy and natural fibers for the production of heavy felts. Installation and start-up of the machine are scheduled for the second quarter of 2021. The new needlepunch production line with the high-performance ANDRITZ cylinder pre-needler will allow Amarande to offer high-quality products and thus open up new market opportunities.

ANDRITZ offers a complete range of elliptical cylinder pre-needlers serving different weights, widths, speeds and punching capacity. Over the years they have become a must for production of heavy products, special applications and also for demanding applications like automotive. They are a key success factor in enabling the subsequent needling machines to process heavy batts smoothly and control the progressive draft through the consolidation process.  

International technology Group ANDRITZ has received an order from Amarande SAS to supply an elliptical cylinder pre-needler for their plant in Lussac les Châteaux, France. This machine will process shoddy and natural fibers for the production of heavy felts. Installation and start-up of the machine are scheduled for the second quarter of 2021. The new needlepunch production line with the high-performance ANDRITZ cylinder pre-needler will allow Amarande to offer high-quality products and thus open up new market opportunities.

ANDRITZ offers a complete range of elliptical cylinder pre-needlers serving different weights, widths, speeds and punching capacity. Over the years they have become a must for production of heavy products, special applications and also for demanding applications like automotive. They are a key success factor in enabling the subsequent needling machines to process heavy batts smoothly and control the progressive draft through the consolidation process.  

Established in 1990, Amarande is an important French producer of nonwovens, specialized in the production of felt and wadding from recycled textile and natural fibers (wool, cotton, hemp, flax, jute, etc.). The company operates in various markets such as furniture, green spaces, horticultural crops, and insulation.

Source:

ANDRITZ AG

MaruHachi/AMAC: High-temperature thermoplastic tapes and laminates (c) MaruHachi
16.02.2021

MaruHachi/AMAC: High-temperature thermoplastic tapes and laminates

With their recently installed high-temperature unidirectional tape line, Japan-based composites manufacturer MaruHachi enables new opportunities for high-end applications in demanding market segments like aerospace, automotive or others outperforming traditional materials based on PP and PA which are already widely available.

In the first phase, MaruHachi will produce up to 40 tons/year and focuses now specifically on high-temperature thermoplastic uni-directional (UD) tapes and multi-layer sheet laminates. The material is based on high-performance fibers like carbon, aramid, glass or natural fibers and the matrix can be high-performance polymers like PPS, PEEK or other higher temperature polymers, which are much tougher than epoxies and easy to recycle. With a width of 500 mm, a specific weight from 60 to 350 g/m2, depending on the chosen material, the lines can operate under temperatures up to 420 degrees Celsius. Working under these extremely high temperatures allows for better material properties of the final application, higher performance, increased resistance and integrated high-performance functionalities e.g. by overmoulding.

With their recently installed high-temperature unidirectional tape line, Japan-based composites manufacturer MaruHachi enables new opportunities for high-end applications in demanding market segments like aerospace, automotive or others outperforming traditional materials based on PP and PA which are already widely available.

In the first phase, MaruHachi will produce up to 40 tons/year and focuses now specifically on high-temperature thermoplastic uni-directional (UD) tapes and multi-layer sheet laminates. The material is based on high-performance fibers like carbon, aramid, glass or natural fibers and the matrix can be high-performance polymers like PPS, PEEK or other higher temperature polymers, which are much tougher than epoxies and easy to recycle. With a width of 500 mm, a specific weight from 60 to 350 g/m2, depending on the chosen material, the lines can operate under temperatures up to 420 degrees Celsius. Working under these extremely high temperatures allows for better material properties of the final application, higher performance, increased resistance and integrated high-performance functionalities e.g. by overmoulding.

Since 2017, MaruHachi Group is active in the European market in cooperation with Dr. Michael Effing,the CEO of AMAC GmbH, who advises and supports the company strategically. The established, family-owned MaruHachi Group has a strong history in automotive and medical textiles and has been active in the innovative composites market for more than 15 years.

Toshi Sugahara, CEO of MaruHachi: “For many years, we have already been cooperating with domestic and international partners on high-demand applications and therefore, MaruHachi decided now to invest over 1 million EUR in this new line in phase 1, including a funding participation from the Japanese government NEDO. New developments in phase 2 will be be undertaken by end of 2021 on the downstream technologies like the automated preforming and consolidation. With our new products, we want to contribute to significant weight reductions of the final products, thus improve energy efficiency while offering a cost-efficient and high-quality solution.”

Dr. Effing, CEO of AMAC GmbH confirms: „The focus on the niche of high-temperature products based on PPS and PEEK allows MaruHachi on very demanding high-end applications such as structural frames on space and aircrafts, aircraft seats or engine components etc. The tapes are fully recyclable and can be processed e.g. with high-speed with laser-based tape placement machines and robots.”

Source:

AMAC GmbH

27.01.2021

Rieter: First Information on the Financial Year 2020

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

As expected, as a consequence of the economic effects of the COVID-19 pandemic, the Rieter Group closed the 2020 financial year with considerably lower sales than in the previous year. According to the first, as yet unaudited figures, total sales of CHF 573.0 million were achieved, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million).

Order Intake by Business Group
All three business groups were affected by the slump in demand in the second quarter of 2020 due to the COVID-19 pandemic. Despite the recovery in order intake in the third and fourth quarters of 2020, the weak second quarter was only partially offset.

The Business Group Machines & Systems was particularly hard hit by the effects of the pandemic, with a year-on-year decline of 35%. The Business Groups Components and After Sales each recorded a 24% reduction in order intake.*

Sales by Business Group
The exceptional market situation in 2020 gave rise to a significant decline in sales in all three business groups. Accordingly, reluctance to invest and deferred deliveries by customers caused sales in the Business Group Machines & Systems to decline by 24% compared to the previous year.

Due to COVID-19, a large number of spinning mills stopped production worldwide. This led to low demand for spare parts and wear parts, especially in the second and third quarters of 2020. Accordingly, compared to the previous year, sales in the Business Groups Components and After Sales fell by 24% and 27% respectively in the 2020 financial year.*

Sales by Region
With the exception of Turkey, all regions were affected by the low demand as a consequence of the COVID-19 pandemic.*

EBIT Margin and Net Profit
In the 2020 financial year, Rieter anticipates an EBIT margin of around -15% (2019: 11.2%) and net profit of around -16% of sales (2019: 6.9%). As of December 31, 2020, Rieter had liquid funds of exceeding CHF 280 million and unused credit lines in the mid three-digit million range.

First Half of 2021 Still Heavily Impacted by the COVID-19 Pandemic
Thanks to the improved capacity utilization, Rieter is planning short-time working in only a few areas in the first half of 2021. Nevertheless, Rieter expects sales in the first half of 2021 to be below the break-even point.*

Change to the Group Executive Committee
With effect from March 1, 2021, the Board of Directors of Rieter Holding Ltd. has appointed Roger Albrecht as Head of the Business Group Machines & Systems and a member of the Group Executive Committee.*

Annual General Meeting April 15, 2021
The 2021 Annual General Meeting of Rieter Holding Ltd. will take place in Winterthur on April 15, 2021.*


*See attached document for more information.

Source:

Rieter Management AG

Flax for Composites: Woven tapes made of natural fibres by vombaur (c) Elke Wetzig, Wikimedia
Lightweight, firm, sustainable: Flax tape by vombaur
02.12.2020

Flax for Composites: Woven tapes made of natural fibres by vombaur

Flax has accompanied people for thousands of years, in linen fabrics, in ropes, as insulation material. And until the present day. With woven tapes made of flax, vombaur makes the functional and ecological advantages of natural fibres available for lightweight design.

Lightweight and firm
Flax fibres are particularly rigid and tear-proof. Textiles made of the natural material therefore give natural fibre reinforced plastic (NFP) special stability. Additionally, flax has a low density. The components thus combine high rigidity and strength with low weight. Another functional plus: natural fibre reinforced plastics are less prone to splintering than glass fibre reinforced plastics.

Sustainable material
The cultivation of flax binds CO2 and the production of NFP generates 33 percent lower CO2 emissions than conventional fibre reinforced plastics. The energy consumption is 40 percent lower. This reduces production costs and improves the material's CO2 footprint. Punch-packing arguments for natural fibre tapes – like flax tape by vombaur – in lightweight design applications.

Flax has accompanied people for thousands of years, in linen fabrics, in ropes, as insulation material. And until the present day. With woven tapes made of flax, vombaur makes the functional and ecological advantages of natural fibres available for lightweight design.

Lightweight and firm
Flax fibres are particularly rigid and tear-proof. Textiles made of the natural material therefore give natural fibre reinforced plastic (NFP) special stability. Additionally, flax has a low density. The components thus combine high rigidity and strength with low weight. Another functional plus: natural fibre reinforced plastics are less prone to splintering than glass fibre reinforced plastics.

Sustainable material
The cultivation of flax binds CO2 and the production of NFP generates 33 percent lower CO2 emissions than conventional fibre reinforced plastics. The energy consumption is 40 percent lower. This reduces production costs and improves the material's CO2 footprint. Punch-packing arguments for natural fibre tapes – like flax tape by vombaur – in lightweight design applications.

Circular Economy
Circular Economy – this also works in lightweight design. The number of recycling cycles without loss of quality is higher for natural fibre reinforced plastics than for glass or carbon fibre reinforced plastics: the thermoplastic matrix of the composite can be melted and recycled after a product life cycle. The natural fibres can "live on" in other products – injection moulded products for example.

Versatile applications
"Composites from our flax tapes are used to reinforce high-tech skis as well as for extruding state-of-the-art window sections – the applications are countless," explains Tomislav Josipovic, Sales Manager with vombaur. "As a development partner, we support applications for the automotive, wind energy, construction, sports and many other industries with our composite textiles."

More information:
vombaur Naturfasern Composites
Source:

stotz-design.com

INNATEX feiert über zwei Dekaden Sustainable Fashion (c) INNATEX – Internationale Fachmesse für nachhaltige Textilien
©INNATEX Pressefotos
19.07.2019

INNATEX feiert über zwei Dekaden Sustainable Fashion

  • „Green Fashion grows here“

Frankfurt am Main - Unter diesem Titel findet vom 27. bis 29. Juli 2019 die INNATEX mit rund 300 Brands in Hofheim-Wallau statt. Das Motto weist auf die Geschichte der Naturtextil-Branche hin, die die Fachmesse für nachhaltige Mode und Accessoires seit 1997 begleitet. Einmal mehr präsentieren sich im Messecenter Rhein-Main unterschiedliche Vertreter der Branche: Pionier-Marken gestalten die Entwicklung von Ecofashion genauso wie Newcomer, digitale Tools von Start-ups genauso wie altbekannte Institutionen, zu denen allen voran der Internationale Verband der Naturtextilwirtschaft (IVN) zählt.

Expertenvorträge betrachten die Industrie aus der Vogelperspektive

  • „Green Fashion grows here“

Frankfurt am Main - Unter diesem Titel findet vom 27. bis 29. Juli 2019 die INNATEX mit rund 300 Brands in Hofheim-Wallau statt. Das Motto weist auf die Geschichte der Naturtextil-Branche hin, die die Fachmesse für nachhaltige Mode und Accessoires seit 1997 begleitet. Einmal mehr präsentieren sich im Messecenter Rhein-Main unterschiedliche Vertreter der Branche: Pionier-Marken gestalten die Entwicklung von Ecofashion genauso wie Newcomer, digitale Tools von Start-ups genauso wie altbekannte Institutionen, zu denen allen voran der Internationale Verband der Naturtextilwirtschaft (IVN) zählt.

Expertenvorträge betrachten die Industrie aus der Vogelperspektive

Der IVN, Herausgeber anerkannter Standards für nachhaltige Textil- und Lederprodukte (Naturtextil BEST, GOTS, Naturleder IVN) und Schirmherr der INNATEX, wird 20. Das Jubiläum ist Anlass für eine intensive Präsenz des Verbands auf der Messe. Sowohl Heike Hess, Geschäftsführerin des IVN, als auch Norbert Henzel, Diplom-Chemiker an der Universität Oldenburg, halten jeweils einen Talk und erzählen, was hinter den Kulissen der Modewelt passiert. Zu den Inhalten zählen der aktuelle Status und Neuigkeiten bezüglich nachhaltiger Textilsiegel, Schlaglichter auf den Entwicklungsprozess nachhaltiger Mode in den letzten 20 Jahren und künftige Herausforderungen.

Die Zukunft der Industrie sieht Heike Hess generell optimistisch: „Das Bewusstsein verändert sich, egal wo man hinschaut – ob im Bereich der Ernährung, Literatur oder Mode“, stellt die Geschäftsführerin des 1999 gegründeten Pionierverbands fest. „Der Verbraucher versteht den Sinn von Ecofashion. Nun müssen wir noch wirksamer vermitteln, dass nachhaltige Kleidung – also solche, die ohne schädliche Substanzen auskommt und von deren Herstellung Menschen leben können – mehr kostet als 3,75 Euro. Das zahlt man oft schon für ein Brot.“

Digitale Lösungen erleichtern Management-Prozesse und Netzwerkpflege

Die INNATEX hat eine Partnerschaft mit Fashion Cloud geschlossen. Das gemeinsame Projekt INNATEX ONLINE bietet Ausstellern der INNATEX und XOOM Berlin eine vergünstigte Premium-Mitgliedschaft bei Fashion Cloud an. Die Online-Plattform verbindet über 350 Marken und 5000 Händler aus der Modebranche. Mit der App OrderWriter organisieren Einkäufer mobil ihre Orderprozesse, verwalten Informationen und Materialien, überblicken Budgets und Kapazitäten. In Hofheim-Wallau halten nun René Schnellen, Co-Founder, und Kathrin Ranegger, Business Development Manager, ihren Talk über die Digitalisierung, das Produkt, Features, Vorteile gleich zweimal, jeweils am Samstag und am Sonntag.

Modenschauen, Netzwerkveranstaltungen, die Buyer’s Lounge und die Abendveranstaltung INNATEX Night, die auch das Jubliäum des IVN feiert, runden das Programm ab.

DesignDiscoveries: Hohe Nachhaltigkeits-Standards und sehr viel Leidenschaft

Ein weiteres Highlight sind die DesignDiscoveries. Jede INNATEX stellt eine kuratierte Auswahl an Marken vor, die soziale und umweltfreundliche Maßstäbe erfüllen und in den Bereichen Design und Qualität überzeugen. Jüngster Newcomer ist das Berliner Streetwear-Label Sam Lang mit seinem konzeptionellen, „genderless“ Design. Die Kollektion zeichnet sich durch grafische Muster sowie eine innovative Silhouette und Faltenlegung aus. Das Label für Damenmode Nudo aus Barcelona verbindet natürliche Textilien mit urbanem Chic und fairer Produktion in Europa.

Ecocape entwickelt eine Form von Outdoor-Mantel für Frauen, der funktionale Aspekte vereint, aber im Gegensatz zur sportlichen Windjacke einen eleganten Look hat. Zu den Materialien des in Deutschland hergestellten Capes gehört recyceltes Polyester. Das Label Klaamotte versieht seine Business-Hemden mit einem QR-Code, über den sich der konsequent durchdachte Herstellungsprozess nachverfolgen lässt. Bald soll eine Linie mit feinen, subtil humorvollen Mustern erscheinen.

Die Taschen und Accessoires von UlSto bestehen unter anderem aus nachhaltig geerntetem Kork und Filz aus recyceltem PET. Mit einem minimalistischem, zeitlosen Designansatz sollen die Produkte den Konsumenten im Sinne von Slow Fashion lange begleiten. Die Marken Ethnotek und N’GO Shoes stehen vor allem für Schuhe und Taschen mit gemusterten Stoffen, die von Kunsthandwerkern aus Vietnam gefertigt werden.

Die Kleinen kommen wie bei jeder INNATEX auch nicht zu kurz: Elodiee aus Dänemark entwickelt minimalistische Einteiler aus zertifizierter Baumwolle für Babys, Kinder und Frauen. Organic Cotton verwendet auch das Label Kidsbury für seine Kinderkollektionen. Das Produkt-Portfolio reicht von Jumpsuits über Leggings zu Sweatshirts.