From the Sector

Reset
50 results
© Natalie Wunder
From left: Patrick Engel (STFI), Caspar Böhme (Sumo), Ilka Kaczmarek (KF), Dr. Marina Crnoja-Cosic (KF)
22.06.2022

Kelheim Fibres wins Techtextil Innovation Award

The viscose specialities manufacturer Kelheim Fibres has won the Techtextil Award in the "New Concept" category for their project "Cellulose-based nonwovens for highly absorbent reusable products".
This award is intended to make cutting-edge developments visible, promote unconventional thinking and intensify the dialogue between researchers, manufacturers.

The starting point for the innovation was the search for a washable and thus reusable absorbent pad made of completely bio-based materials for the cloth diaper of the Berlin-based start-up Sumo.
Two main requirements of the application are obvious: A fast and efficient liquid distribution and high absorbency should minimise rewetting and leakage. Both are ensured by speciality viscose fibres from Kelheim, which have been making this essential contribution to absorbent hygiene products such as tampons for many years. The obvious solution was therefore to optimally utilise the synergies between knitted and woven structures with nonwovens.

The viscose specialities manufacturer Kelheim Fibres has won the Techtextil Award in the "New Concept" category for their project "Cellulose-based nonwovens for highly absorbent reusable products".
This award is intended to make cutting-edge developments visible, promote unconventional thinking and intensify the dialogue between researchers, manufacturers.

The starting point for the innovation was the search for a washable and thus reusable absorbent pad made of completely bio-based materials for the cloth diaper of the Berlin-based start-up Sumo.
Two main requirements of the application are obvious: A fast and efficient liquid distribution and high absorbency should minimise rewetting and leakage. Both are ensured by speciality viscose fibres from Kelheim, which have been making this essential contribution to absorbent hygiene products such as tampons for many years. The obvious solution was therefore to optimally utilise the synergies between knitted and woven structures with nonwovens.

In doing so, the advantages of nonwovens in combination with speciality viscose fibres in terms of absorbency (through e.g. more open-pored structures) have been perfectly transferred from the field of disposable to the world of reusable products. For reusable products, however, there is another challenge to overcome: they must remain stable during washing and over several cycles of use. To ensure this, an innovative nonwoven construction was developed in close cooperation with the STFI. These nonwovens can be used as a stand-alone solution or integrated into a textile structure.

Source:

Kelheim Fibres

(c) Freudenberg Performance Materials Holding SE & Co. KG
21.06.2022

Freudenberg endorses further products with ECO-CHECK label

Freudenberg Performance Materials (Freudenberg) is endorsing further sustainable products with its ECO-CHECK label introduced last year. These products comply with various environmental criteria. With immediate effect, five more solutions bear the label making the company’s commitment to sustainability visible.

Leather goods
The newly-endorsed ECO-CHECK products include one Evolon® microfilament textile application. This is a reinforcement material for leather goods that is manufactured with no solvent and no binder. It contains up to 80 percent recycled PET and is suitable for a broad range of applications. The material is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria.

Freudenberg Performance Materials (Freudenberg) is endorsing further sustainable products with its ECO-CHECK label introduced last year. These products comply with various environmental criteria. With immediate effect, five more solutions bear the label making the company’s commitment to sustainability visible.

Leather goods
The newly-endorsed ECO-CHECK products include one Evolon® microfilament textile application. This is a reinforcement material for leather goods that is manufactured with no solvent and no binder. It contains up to 80 percent recycled PET and is suitable for a broad range of applications. The material is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria.

Healthcare applications
In the field of healthcare, the bio-based M 1714 wound pad with superior absorption for more challenging wounds has now been endorsed with the ECO-CHECK label. The dressing consists of a mix of bio-based fibers derived from natural sources and exhibits a smooth wound contact layer. The product has been evaluated for industrial compostability and conforms to ISO 13432.

Architectural applications
The sustainable TF 400 Eco F mesh fabric for textile architecture from Mehler Texnologies® now also bears the ECO-CHECK label. Its yarn is made of 100% recycled PET bottles and its characteristics are very similar to those of conventional mesh fabrics. In 2021, it was awarded first place by the Architectural Membrane Association (AMA) in the “product” category in recognition of its properties.

Shoes
In the shoe industry, the binder-free strobel insoles have been endorsed as particularly sustainable. They contain a high percentage of recycled green bottle flakes. Moreover, the insoles themselves are fully recyclable.

Filtration applications
The two layered, needle-punched nonwoven filter medium that has just been endorsed with the ECO-CHECK label has impressive sustainability characteristics. Made entirely of polyester, more than half the fibers consist of recycled material.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

Photo: Devan Chemicals NV
15.06.2022

Devan expands cooling technology range

At Heimtextil Frankfurt 2022, Devan, will launch novel technologies to the Home Textiles market. The first innovation is a range of bio-based and biodegradable microcapsules. With increased sustainability and circularity requirements in Europe and beyond, Devan is pushing the limits further of its encapsulation methods, also in terms of wash durability. The capsules are biodegradable and hence no harm for risk of microplastics. The new R-Vital NTL range includes evergreen Aloe Vera, waste-material based avocado seed oil with very high hydration abilities! and Vitamine E.

Devan, as part of the Pulcra Chemicals Group, co-launches the new Pulcra TEC-SU, a new biobased C0 DWR. This hydrophobic agent has a bio-content above 60% and contains no APEO or formaldehyde. It keeps performing very good after multiple washings.

At Heimtextil Frankfurt 2022, Devan, will launch novel technologies to the Home Textiles market. The first innovation is a range of bio-based and biodegradable microcapsules. With increased sustainability and circularity requirements in Europe and beyond, Devan is pushing the limits further of its encapsulation methods, also in terms of wash durability. The capsules are biodegradable and hence no harm for risk of microplastics. The new R-Vital NTL range includes evergreen Aloe Vera, waste-material based avocado seed oil with very high hydration abilities! and Vitamine E.

Devan, as part of the Pulcra Chemicals Group, co-launches the new Pulcra TEC-SU, a new biobased C0 DWR. This hydrophobic agent has a bio-content above 60% and contains no APEO or formaldehyde. It keeps performing very good after multiple washings.

The Devan bio-based thermoregulation range, like Tones of Cool Bio which is already several years on the market, is having a positive effect on carbon footprint. Devan is now expanding its cooling range with a specific foam-solution. In the Home Textile industry new (bio)foam types are introduced the last 1,5 years to comply with the EU GreenDeal and circularity / recycling requirements. A good enough reason for Devan to develop a foam-specific cooling system. After all, research shows that our bedroom interiors get warmer every year, partly due to better insulation but also due to global warming. On top of that Devan thermoregulation solutions can save Energy and Water during application: low curing solutions are available next to cooling products to that can be applied, using less water.

 

Source:

Devan Chemicals NV

Natural fibers combined with bio-derived epoxy resins provide sustainable options for Industrial markets (c) Hexcel
Hexcel HexPly® Nature Range
11.05.2022

Hexcel Launches HexPly® Nature Range

  • Natural fibers combined with bio-derived epoxy resins provide sustainable options for Industrial markets

Hexcel has developed a new product range that combines Hexcel resin systems made with bio-derived resin content with natural fiber reinforcements to create material solutions for Automotive, Winter Sports, Marine and Wind Energy applications.

HexPly Nature Range includes proven resins such as HexPly M49, M78.1-LT and M79 but with bio-derived epoxy resin content. The excellent resin characteristics remain unchanged in the new Nature Range products, maintaining high mechanical performance and consistent processing properties.
In addition, the HexPly Nature Range provides prepreg options with natural fiber reinforcements that can be seamlessly integrated into existing production processes.

Hexcel worked with TÜV Austria to provide independent, high-quality measurement and assessment of the bio-content of HexPly Nature Range products. TÜV Austria’s OK biobased certification uses a standardized measurement of the biobased carbon content enabling transparency and easy like-for-like comparison between products.

  • Natural fibers combined with bio-derived epoxy resins provide sustainable options for Industrial markets

Hexcel has developed a new product range that combines Hexcel resin systems made with bio-derived resin content with natural fiber reinforcements to create material solutions for Automotive, Winter Sports, Marine and Wind Energy applications.

HexPly Nature Range includes proven resins such as HexPly M49, M78.1-LT and M79 but with bio-derived epoxy resin content. The excellent resin characteristics remain unchanged in the new Nature Range products, maintaining high mechanical performance and consistent processing properties.
In addition, the HexPly Nature Range provides prepreg options with natural fiber reinforcements that can be seamlessly integrated into existing production processes.

Hexcel worked with TÜV Austria to provide independent, high-quality measurement and assessment of the bio-content of HexPly Nature Range products. TÜV Austria’s OK biobased certification uses a standardized measurement of the biobased carbon content enabling transparency and easy like-for-like comparison between products.

At JEC World in Paris on May 3-5, Hexcel presented an alpine ski produced by the Tecnica Group Ski Excellence Center which produces skis for Blizzard and for Nordica using HexPly Nature Range M78.1-LT UD flax fiber prepreg. In addition to providing a bio-based material solution, the natural fiber-reinforced prepreg also offers the potential to improve impact performance and vibration damping in the ski.

Claude Despierres, VP of Sales and Marketing – Industrial at Hexcel, said, “Our new HexPly Nature Range forms an important part of providing customers with biobased, TÜV-certified material options based on our established prepreg resin systems. Marine, winter sports, wind energy and automotive manufacturers can now have the choice to switch from petroleum-based material solutions to Hexcel HexPly Nature Range with no compromise in performance or process efficiency.”

More information:
Hexcel’s HexPly® JEC World
Source:

Hexcel

(c) Reifenhäuser
01.04.2022

Reifenhäuser Reicofil showed sustainable Nonwovens at IDEA 22

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwoven-film composites with low grammage
For the medical sector, Reicofil showcased its leading solutions for high-barrier medical protective clothing and - together with its sister business unit Reifenhäuser Cast Sheet Coating - the pioneering Ultrathin Coating production process, which enables customers to produce film-nonwoven-composites more cost-effectively and thus competitively.

Smart digitization
With the c.Hub, the new data platform of the Reifenhäuser Group, Reicofil offers its customers a digitization solution that is tailored to the requirements of nonwovens production.

More information:
Reifenhäuser IDEA nonwovens digital
Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

Beaulieu International Group
24.03.2022

Beaulieu Fibres International at IDEA®22

  • Complete fibre portfolio for geotextiles, hygiene & wipes, floor coverings, automotive, upholstery, filtration, RTM and construction
  • Increasing nonwoven & engineered fabric performance with new fibres that reduce carbon footprint & support design for recycling
  • Exploring new possibilities for collaboration using BFI’s expertise, pilot line and equipment

 Beaulieu Fibres International, the largest and most differentiated European staple fibre producer, turns the spotlight on future-focused solutions for nonwovens & engineered fabrics at IDEA®22, 28-31 March. A key priority is innovation in polyolefin and BICO fibres to advance sustainable design, end-of-life recyclability, and resource and carbon footprint reduction for industrial and hygiene applications.

Sustainability is key to Beaulieu Fibre International’s long-term strategy, and the company is heavily focused on defining its green portfolio to support evolution in diverse market applications.

  • Complete fibre portfolio for geotextiles, hygiene & wipes, floor coverings, automotive, upholstery, filtration, RTM and construction
  • Increasing nonwoven & engineered fabric performance with new fibres that reduce carbon footprint & support design for recycling
  • Exploring new possibilities for collaboration using BFI’s expertise, pilot line and equipment

 Beaulieu Fibres International, the largest and most differentiated European staple fibre producer, turns the spotlight on future-focused solutions for nonwovens & engineered fabrics at IDEA®22, 28-31 March. A key priority is innovation in polyolefin and BICO fibres to advance sustainable design, end-of-life recyclability, and resource and carbon footprint reduction for industrial and hygiene applications.

Sustainability is key to Beaulieu Fibre International’s long-term strategy, and the company is heavily focused on defining its green portfolio to support evolution in diverse market applications.

Bio-based fibres
From June 2022, Beaulieu Fibres International will offer ISCC+ certification on mono-PP and BICO PP/PE fibres. The fibres will be offered in 1,3-8,9 dtex and will be available with all the main available finish classes (ie. hydrophilic, hydrophobic, etc.) suitable for the main carding and consolidation technologies. These drop-in solutions with no loss in quality will support customers looking to reduce reliance on virgin fossil carbon in their nonwoven and engineered fibre applications. The bio-based fibres enable customers to contribute to the transition towards a circular economy.

Achieving material savings
For customers in industrial segments like geotextiles, high-tenacity HT8 staple fibres enable customers to achieve nonwovens for construction projects with high mechanical performance but with 15% less weight. The durability of the fibres means that customers can use less raw material for a longer service lifetime, supporting more sustainable design in addition to resource reduction.
For hygiene nonwovens, the Meralux fibres provide significant sustainable design advantages. Meralux fibres deliver substantial sustainability benefits including around 55% savings in raw materials, with equivalent carbon emission savings. These emission savings are thanks to weight reduction in nonwovens with the same coverage level and also the higher recyclability of PP/PE compared to BICO materials.

Source:

Beaulieu International Group

(c) Dubai Museum of the Future
02.03.2022

Sicomin supports Dubai's Museum of the Future with fire-retardant epoxy solutions

Sicomin supported the build of Dubai’s Museum of the Future and supplied its bio-based intumescent gelcoat as well as fire-retardant laminating resins for the production of over 200 double curved panels making up the interior of the Museum’s entrance lobby.

The Museum of the Future, a new addition to Dubai’s skyline by architects Killa Design, engineers Buro Happold and contractor BAM International, opened last week on 22nd February 2022 and features a large percentage of composite materials in the interior construction.

Advanced Fiberglass Industries (AFI) manufactured 230 double curved interior panels, a double-helix DNA structure staircase that scales the full seven levels of the museum and 228 GRP oval shaped light structures for the museums car parking area.

Sicomin supported the build of Dubai’s Museum of the Future and supplied its bio-based intumescent gelcoat as well as fire-retardant laminating resins for the production of over 200 double curved panels making up the interior of the Museum’s entrance lobby.

The Museum of the Future, a new addition to Dubai’s skyline by architects Killa Design, engineers Buro Happold and contractor BAM International, opened last week on 22nd February 2022 and features a large percentage of composite materials in the interior construction.

Advanced Fiberglass Industries (AFI) manufactured 230 double curved interior panels, a double-helix DNA structure staircase that scales the full seven levels of the museum and 228 GRP oval shaped light structures for the museums car parking area.

Adaptable mould technology from Danish company Adapa, was introduced by Advanced Fiberglass Industries, Dubai (AFI) to ensure that the interior panels could be delivered in line with the project schedule. As well as allowing each panel shape to be rapidly configured without the machining of traditional moulds, the adaptive mould technology massively reduced waste generated in the moulding process, contributing to the building’s low carbon LEED platinum credentials.

With a challenging structural and fire safety specification defined, Sicomin’s bio-based SGi128 intumescent gelcoat and SR1122 fire retardant laminating epoxy were chosen for the panels, an additional advantage being that in addition to high fire properties, SGi 128 is also formulated with over 30% carbon from renewable sources, reducing the final carbon footprint significantly.  

Sicomin worked alongside the panel manufacturer, providing technical support for the fire test panels and the initial Adapa moulding trials.

Source:

Sicomin / 100% Marketing

Soul Comfort by RIRI (c) Riri Group
09.02.2022

Riri Group presents its new collection SS 2023 at Première Vision Paris

For over 80 years Riri Group has established itself as a leading point of reference for the creation of details of style providing high-end fashion brands with top quality accessories – which now include zippers, buttons, metal components and fashion jewels.

All things style and sustainability: This year Première Vision Paris (08 – 10 February) will be once more the stage to show off the results. The new Spring/Summer 2023 line is inspired by three distinct eras and paths, but at the same time it conveys a total synergy and integration between the various divisions of the Group, coordinated and harmonised as well as united by their common interest in nature and sustainability.

For over 80 years Riri Group has established itself as a leading point of reference for the creation of details of style providing high-end fashion brands with top quality accessories – which now include zippers, buttons, metal components and fashion jewels.

All things style and sustainability: This year Première Vision Paris (08 – 10 February) will be once more the stage to show off the results. The new Spring/Summer 2023 line is inspired by three distinct eras and paths, but at the same time it conveys a total synergy and integration between the various divisions of the Group, coordinated and harmonised as well as united by their common interest in nature and sustainability.

SOUL COMFORT
Off-the-grid essentials between relaxation and style
Sparked from the contemporary need to balance happiness and security, while enriched by an aesthetic and provocative approach, this line embodies all the value and potential of a sustainabilityoriented communication for each and every product, as pieces feature the relevant information on the zip tape and on the button application support. This line presents softer colours that encompass a wide range of styles, including floral, summer satin and semi-transparency, accompanied by innovative yarns and sustainable materials, such as hemp, linen, silk, certified organic cotton, recycled nylon and bio-based polyester. The line also features stainless steel products, including mono-material buttons and zipper chains or the use of aluminium chains that stand out for their particular lightness.

OUTDOOR EXPRESSION
To always stand out
Inspired by nature and outdoor activities, in this section the focus is on attire codes that become the means through which everyone can express and enhance their look in every context, even when immersed in the surrounding environment. Coloured stripes and rubberized soft touch materials are the two essential concepts, combined with bright and flashy colours. The Storm Evo zip, reversed coated nylon zips (among which the one with the reflector catches the eye), and the recycled nylon buttons are back.

WISE EXCLUSIVITY
Smart and sustainable luxury
Each creation in this line is studied down to the smallest detail, to achieve luxury products that increase their value over time thanks to their sustainable process and long life cycle, achieved through multiple possibilities for use in different ways and areas. We find here the use of diamond, recreated in the laboratory with more sustainable techniques, but also zips with elegant and refined lines, the use of stainless steel and PVD and finally, the use of precious galvanic finishes on buttons, but also on chains and pullers. This path shows the important role collaboration plays between the divisions of the Riri Group, making it possible to create something unique and valuable.

Source:

Menabò Group srl

27.01.2022

Radici Yarn certified to ISO 50001 Energy Management Systems

Over 400 employees work hard every day to improve the environmental performance of Radici Yarn’s site. Through teamwork and continuous improvement in energy efficiency, Radici Yarn has obtained ISO 50001 Energy Management Systems certification, which attests to the organization’s commitment to contain and progressively reduce energy consumption.

Radici Yarn, one of the companies in the RadiciGroup Advanced Textile Solutions Business Area, is engaged in the production and sale of polyamide 6 polymer, PA6 and PA66 continuous filament and staple yarn, and other synthetic fibres, including products made of recycled or bio-based materials.

All the processes - polymerization and spinning (Villa d'Ogna plant), as well as warping and draw-warping (Ardesio plant) - are run under constant monitoring with the goal of achieving maximum energy efficiency and lower consumption. Both sites are powered by two hydroelectric power plants owned by Geogreen, a RadiciGroup partner and energy supplier. The share of energy consumption from renewable sources and reduced environmental impact (natural gas) sources  is constantly increasing.

Over 400 employees work hard every day to improve the environmental performance of Radici Yarn’s site. Through teamwork and continuous improvement in energy efficiency, Radici Yarn has obtained ISO 50001 Energy Management Systems certification, which attests to the organization’s commitment to contain and progressively reduce energy consumption.

Radici Yarn, one of the companies in the RadiciGroup Advanced Textile Solutions Business Area, is engaged in the production and sale of polyamide 6 polymer, PA6 and PA66 continuous filament and staple yarn, and other synthetic fibres, including products made of recycled or bio-based materials.

All the processes - polymerization and spinning (Villa d'Ogna plant), as well as warping and draw-warping (Ardesio plant) - are run under constant monitoring with the goal of achieving maximum energy efficiency and lower consumption. Both sites are powered by two hydroelectric power plants owned by Geogreen, a RadiciGroup partner and energy supplier. The share of energy consumption from renewable sources and reduced environmental impact (natural gas) sources  is constantly increasing.

The energy issue has always been a priority for Radici Yarn, whose products serve numerous sectors, including automotive, clothing and furnishings.

"Already at the beginning of the 1990s, Radici Yarn started investing in cogeneration, the simultaneous production of electricity and steam,” pointed out Laura Ravasio, energy manager of Radici Yarn SpA. “We have recently started up an advanced trigeneration plant – a highly efficient system that produces not only electricity and steam, but also chilled water for our production processes. One of the first results recorded in 2021 was a 30% reduction in water consumption. Thus, ISO 50001 certification seemed like the next logical step to take in formalizing a long-term approach to energy.”

The ISO 50001 certification, which is voluntary and valid for a period of three years, was added to the ISO 14001 Environmental and ISO 9001 Quality Management system certifications previously achieved by Radici Yarn.

Source:

RadiciGroup

04.01.2022

AMSilk & Mercedes-Benz: Sustainable car door pulls

  • AMSilk Partners with Mercedes-Benz to Present a Sustainable Bio-Based Product
  • The use of a biotechnology-based and certified-vegan silk-like fabric marks a first in the automotive sector

AMSilk GmbH (“AMSilk”), a leader in supplying innovative high-performance bio-based silk materials, announced a partnership with Mercedes-Benz, for the development of novel, sustainable car door pulls, as part of the car manufacturer’s latest technology programme, the VISION EQXX.

The new concept car, VISION EQXX, features innovative interior materials, revealing a way forward for luxury design that conserves resources and is in balance with nature. Among the organic interior design features are new door pulls made from AMSilk’s Biosteel® fiber. This high-strength, certified-vegan, silk-like fabric is made using AMSilk’s proprietary biotechnology expertise. AMSilk is the world’s first industrial supplier of vegan silk biopolymers which are 100% biodegradable, recyclable, renewable and zero-waste.

  • AMSilk Partners with Mercedes-Benz to Present a Sustainable Bio-Based Product
  • The use of a biotechnology-based and certified-vegan silk-like fabric marks a first in the automotive sector

AMSilk GmbH (“AMSilk”), a leader in supplying innovative high-performance bio-based silk materials, announced a partnership with Mercedes-Benz, for the development of novel, sustainable car door pulls, as part of the car manufacturer’s latest technology programme, the VISION EQXX.

The new concept car, VISION EQXX, features innovative interior materials, revealing a way forward for luxury design that conserves resources and is in balance with nature. Among the organic interior design features are new door pulls made from AMSilk’s Biosteel® fiber. This high-strength, certified-vegan, silk-like fabric is made using AMSilk’s proprietary biotechnology expertise. AMSilk is the world’s first industrial supplier of vegan silk biopolymers which are 100% biodegradable, recyclable, renewable and zero-waste.

Marking a first in the automotive sector, AMSilk’s Biosteel® provides a solution to the car industry whose need to replace petroleum-based content by natural, bio-based materials is increasingly growing.
This new project is the most efficient electric vehicle Mercedes-Benz has ever built and marks a new expression of efficiency and sustainability in interior design. The all-electric VISION EQXX was unveiled in a digital world premiere on the “Mercedes me” media online platform.

Ulrich Scherbel, Chief Executive Officer of AMSilk said: “We are extremely proud to partner with Mercedes-Benz on the technology programme VISION EQXX, providing sustainable interior design solutions from our best-in-class bio-based fibers. Amid a fresh wave of ambitious climate pledges, we are proud to be playing a leading role in providing solutions for a zero-waste future.”

Source:

Optimum Strategic Communications for AMSilk GmbH

Political Tailwind for Alternative Carbon Sources (c) Renewable Carbon Initiative
European Policy under the new green deal
22.12.2021

Political Tailwind for Alternative Carbon Sources

  • More than 30 leading pioneers of the chemical and material sector welcome the latest political papers from Brussels, Berlin and Düsseldorf

The political situation for renewable carbon from biomass, CO2 and recycling for the defossilisation of the chemical and materials industry has begun to shift fundamentally in Europe. For the first time, important policy papers from Brussels and Germany take into consideration that the term decarbonisation alone is not sufficient, and that there are important industrial sectors with a permanent and even growing carbon demand. Finally, the need for a sustainable coverage of this carbon demand and the realisation of sustainable carbon cycles have been identified on the political stage. They are elemental to the realisation of a sustainable chemical and derived materials industry.

  • More than 30 leading pioneers of the chemical and material sector welcome the latest political papers from Brussels, Berlin and Düsseldorf

The political situation for renewable carbon from biomass, CO2 and recycling for the defossilisation of the chemical and materials industry has begun to shift fundamentally in Europe. For the first time, important policy papers from Brussels and Germany take into consideration that the term decarbonisation alone is not sufficient, and that there are important industrial sectors with a permanent and even growing carbon demand. Finally, the need for a sustainable coverage of this carbon demand and the realisation of sustainable carbon cycles have been identified on the political stage. They are elemental to the realisation of a sustainable chemical and derived materials industry.

The goal is to create sustainable carbon cycles. This requires comprehensive carbon management of renewable sources, which includes carbon from biomass, carbon from Carbon Capture and Utilisation (CCU) – the industrial use of CO2 as an integral part – as well as mechanical and chemical recycling. And only the use of all alternative carbon streams enables a true decoupling of the chemical and materials sector from additional fossil carbon from the ground. Only in this way can the chemical industry stay the backbone of modern society and transform into a sustainable sector that enables the achievement of global climate goals. The Renewable Carbon Initiative’s (RCI) major aim is to support the smart transition from fossil to renewable carbon: utilising carbon from biomass, CO2 and recycling instead of additional fossil carbon from the ground. This is crucial because 72% of the human-made greenhouse gas emissions are directly linked to additional fossil carbon. The RCI supports all renewable carbon sources available, but the political support is fragmented and differs between carbon from biomass, recycling or carbon capture and utilisation (CCU). Especially CCU has so far not been a strategic objective in the Green Deal and Fit-for-55.

This will change fundamentally with the European Commission's communication paper on “Sustainable Carbon Cycles” published on 15 December. The position in the paper represents an essential step forward that shows embedded carbon has reached the political mainstream – supported by recent opinions from members of the European parliament and also, apparently, by the upcoming IPCC assessment report 6. Now, CCU becomes a recognised and credible solution for sustainable carbon cycles and a potentially sustainable option for the chemical and  material industries. Also, in the political discussions in Brussels, the term “defossilation” is appearing more and more often, complementing or replacing the term decarbonisation in those areas where carbon is indispensable. MEP Maria da Graça Carvahlo is among a number of politicians in Brussels who perceive CCU as an important future industry, putting it on the political map and creating momentum for CCU. This includes the integration of CCU into the new Carbon Removal Regime and the Emission Trading System (ETS).

As the new policy documents are fully in line with the strategy of the RCI, the more than 30 member companies of the initiative are highly supportive of this new development and are ready to support policy-maker with data and detailed suggestions for active support and the realisation of sustainable carbon cycles and a sound carbon management. The recent political papers of relevance are highlighted in the following.

Brussels: Communication paper on “Sustainable Carbon Cycles”
On 15 December, the European Commission has published the communication paper “Sustainable Carbon Cycles” . For the first time, the importance of carbon in different industrial sectors is clearly stated. One of the key statements in the paper is the full recognition of CCU for the first time as a solution for the circular economy, which includes CCU-based fuels as well. The communication paper distinguishes between bio-based CO2, fossil CO2 and CO2 from direct air capture when addressing carbon removal and it also announces detailed monitoring of the different CO2 streams. Not only CCU, but also carbon from the bioeconomy is registered as an important pillar for the future. Here, the term carbon farming has been newly introduced, which refers to improved land management practices that result in an increase of carbon sequestration in living biomass, dead organic matter or soils by enhancing carbon capture or reducing the release of carbon. Even though the list of nature-based carbon storage technologies is non-exhaustive in our view, we strongly support the paper’s idea to deem sustainable land and forest management as a basis for the bioeconomy more important than solely considering land use as a carbon sink. Surprisingly, chemical recycling, which is also an alternative carbon source that substitutes additional fossil carbon from the ground (i.e. carbon from crude oil, natural gas or from coal), is completely absent from the communication paper.

Berlin: Coalition paper of the new German Government: “Dare more progress – alliance for freedom, justice and sustainability”
The whole of Europe is waiting to see how the new German government of Social Democrats, Greens and Liberals will shape the German climate policy. The new reform agenda focuses in particular on solar and wind energy as well as especially hydrogen. Solar energy is to be expanded to 200 GW by 2030 and two percent of the country's land is to be designated for onshore wind energy. A hydrogen grid infrastructure is to be created for green hydrogen, which will form the backbone of the energy system of the future – and is also needed for e-fuels and sustainable chemical industry, a clear commitment to CCU. There is a further focus on the topic of circular economy and recycling. A higher recycling quota and a product-specific minimum quota for the use of recyclates and secondary raw materials should be established at European level. In the coalition paper, there is also a clear commitment to chemical recycling to be found. A significant change for the industry is planned to occur in regards to the so-called “plastic tax” of 80 cents per kilogram of non-recycled plastic packaging. This tax has been implemented by the EU, but most countries are not passing on this tax to the manufacturers and distributors, or only to a limited extent. The new German government now plans to fully transfer this tax over to the industry.

Düsseldorf: Carbon can protect the climate – Carbon Management Strategy North Rhine-Westphalia (NRW)
Lastly, the RCI highly welcomes North Rhine-Westphalia (NRW, Germany) as the first region worldwide to adopt a comprehensive carbon management strategy, a foundation for the transformation from using additional fossil carbon from the ground to the utilisation of renewable carbon from biomass, CO2 and recycling. For all three alternative carbon streams, separate detailed strategies are being developed to achieve the defossilisation of the industry. This is all the more remarkable as North Rhine-Westphalia is the federal state with the strongest industry in Germany, in particular the chemical industry. And it is here, of all places, that a first master plan for the conversion of industry from fossil carbon to biomass, CO2 and recycling is implemented. If successful, NRW could become a global leader in sustainable carbon
management and the region could become a blueprint for many industrial regions.

15.12.2021

AFRY & Infinited Fiber: Bio-based textile fibers from waste

Finland-based circular fashion and textile technology group Infinited Fiber Company has selected AFRY as the main engineering partner for its new flagship factory for producing regenerated textile fibers for leading fashion and apparel brands.

More than 92 million tonnes of textile waste are produced globally every year, with much of it ending up in landfills or incinerators. At the same time, textile fiber demand is increasing rapidly. Infinited Fiber Company’s technology turns cellulose-based raw materials, like cotton-rich textile waste, into a premium regenerated textile fiber that goes by the name Infinna™. The technology, which can be licensed for both new factories and to retrofit existing pulp or viscose production units, offers a solution for eliminating waste and reducing the textile industry’s burden on limited virgin resources.

Finland-based circular fashion and textile technology group Infinited Fiber Company has selected AFRY as the main engineering partner for its new flagship factory for producing regenerated textile fibers for leading fashion and apparel brands.

More than 92 million tonnes of textile waste are produced globally every year, with much of it ending up in landfills or incinerators. At the same time, textile fiber demand is increasing rapidly. Infinited Fiber Company’s technology turns cellulose-based raw materials, like cotton-rich textile waste, into a premium regenerated textile fiber that goes by the name Infinna™. The technology, which can be licensed for both new factories and to retrofit existing pulp or viscose production units, offers a solution for eliminating waste and reducing the textile industry’s burden on limited virgin resources.

Infinited Fiber Company currently operates pilot plants in Finland and has announced plans to build a flagship factory there to meet the strong demand from international clothing brands. The flagship factory will be the first of its kind in the world and will use post-consumer textile waste as feedstock. Production is scheduled to begin in 2024. In Finland, the national-level collection of textile waste will begin in 2023, and in the EU, the collection of textile waste will become mandatory in 2025, which will facilitate raw material supply.

The annual production capacity of the plant is planned at 30,000 tonnes of Infinna fiber, which corresponds to the amount of fiber needed for about 100 million t-shirts. Infinited Fiber Company has already sold a significant portion of future production through multi-year sales deals with global fashion brands, who see its regenerated Infinna fiber as an important part of their own circular economy strategies.

AFRY’s assignment includes the basic engineering of the new factory to support the final investment decision. In this basic engineering phase, AFRY will design the combination of several technology and equipment deliveries into one viable plant. AFRY will also provide its AFRY Smart Site services for the digitalization of the factory, utilizing Industry 4.0 technologies to optimize and digitally connect all the factory's processes and operations.

10.11.2021

New JEC Group Publication

  • COMPOSITES SUSTAINABILITY REPORT 2021  

JEC Group in collaboration with EuCIA has published the first edition of the Composites Sustainability report 2021. This report seeks to give highlights about the part composite materials are playing in creating the sustainable European economy of the future.   

The contents of the book are comprehensive: starting with discussions around the widely recognised Life  Cycle  Assessment  methodology  for  calculating  the  environmental  impact  of  products,  it then 
moves through a series of analyses and case studies presenting the Circular Economy approach and ranging from raw materials (including bio-based) to industrial components.    

  • COMPOSITES SUSTAINABILITY REPORT 2021  

JEC Group in collaboration with EuCIA has published the first edition of the Composites Sustainability report 2021. This report seeks to give highlights about the part composite materials are playing in creating the sustainable European economy of the future.   

The contents of the book are comprehensive: starting with discussions around the widely recognised Life  Cycle  Assessment  methodology  for  calculating  the  environmental  impact  of  products,  it then 
moves through a series of analyses and case studies presenting the Circular Economy approach and ranging from raw materials (including bio-based) to industrial components.    

The purpose of the work, rather than results, which quickly become obsolete, is to give examples of approaches contributing to and moving towards sustainability. To do so, JEC Group has arbitrarily split
the value chain into five parts:
• Background, LCA, circular economy ;  
• Concept, design, raw materials ;  
• Production, processes, waste ;  
• Recycling, recovery ;
• Applications. 
 
The book “Composites sustainability Report 2021” is for sale online.

08.11.2021

Composites Evolution showcased prepregs and new thermoplastic unidirectional tapes

Composites Evolution exhibited at the Advanced Engineering 2021 show on 3rd - 4th November highlighting its range of prepreg and introducing a new thermoplastic tape manufacturing capability.

Composites Evolution is a developer, manufacturer and supplier of prepregs for the production of lightweight structures from composite materials. A flexible approach allows Composites Evolution to offer short lead times and low minimum order quantities, while decades of combined expertise ensure that in-depth technical support is on-hand when customers need it.

Showcased was a battery box from a high-performance luxury electric vehicle manufactured from Evopreg® PFC bio-based, fire-resistant prepreg, a rear wing from a Ginetta G56 GTA GT4 race car utilising Evopreg® ampliTex™ natural fibre prepreg, and parts fabricated from the company’s newly-launched Evopreg® PA thermoplastic tape range.

Composites Evolution exhibited at the Advanced Engineering 2021 show on 3rd - 4th November highlighting its range of prepreg and introducing a new thermoplastic tape manufacturing capability.

Composites Evolution is a developer, manufacturer and supplier of prepregs for the production of lightweight structures from composite materials. A flexible approach allows Composites Evolution to offer short lead times and low minimum order quantities, while decades of combined expertise ensure that in-depth technical support is on-hand when customers need it.

Showcased was a battery box from a high-performance luxury electric vehicle manufactured from Evopreg® PFC bio-based, fire-resistant prepreg, a rear wing from a Ginetta G56 GTA GT4 race car utilising Evopreg® ampliTex™ natural fibre prepreg, and parts fabricated from the company’s newly-launched Evopreg® PA thermoplastic tape range.

Composites Evolution has a family of specialist prepregs for various applications, including Evopreg® EPC epoxy component prepregs which are a range of pre-impregnated fabrics suitable for moulding into high-performance, lightweight, structural components; Evopreg® EPT epoxy tooling prepregs which have been designed to help composite tooling manufacturers improve the flexibility and efficiency of their tooling manufacturing processes; and Evopreg® PFC fire-retardant prepregs a 100% bio-derived alternative to phenolics for applications where fire performance is a critical requirement.

Evopreg® ampliTex™ combines Composite Evolution’s high-performance Evopreg® epoxy resin systems with Bcomp’s award-winning ampliTex™ flax reinforcements, to deliver a family of materials which offer outstanding performance for component applications.

Composites Evolution launched their new range of Evopreg® PA Thermoplastic Tapes at Advanced Engineering; these are manufactured from polyamide-6 (PA6) polymer with unidirectional carbon fibre and are suitable for automated tape laying, winding and compression moulding into high-performance, lightweight components.

Source:

Composites Evolution Ltd

12.10.2021

DSM to showcase armor solutions made with Dyneema® at Milipol Paris 2021

DSM, the inventor and manufacturer of Dyneema®, will be exhibiting at one of the leading events for homeland security and safety, Milipol Paris 2021, from October 19-22.

The performance characteristics of Dyneema® make it ideal for a variety of applications, including soft and hard armor ballistics to protect against today’s advanced and emerging threats. In addition, Dyneema® combines next-generation fiber technology and unidirectional engineering to deliver armor solutions with unmatched ballistic stopping power in a lightweight and flexible composite.

By implementing Dyneema®, body armor manufacturers are able to use less material in the development of their ballistic vests, plates and helmets. This leads to weight savings upwards of 30 percent when compared to competitive materials, without impacting ballistic performance. The lightweight construction of armor made with Dyneema® also mitigates injuries associated with the cumulative effects of daily armor use – while improving situational awareness, as well as cognitive and tactical performance.

DSM, the inventor and manufacturer of Dyneema®, will be exhibiting at one of the leading events for homeland security and safety, Milipol Paris 2021, from October 19-22.

The performance characteristics of Dyneema® make it ideal for a variety of applications, including soft and hard armor ballistics to protect against today’s advanced and emerging threats. In addition, Dyneema® combines next-generation fiber technology and unidirectional engineering to deliver armor solutions with unmatched ballistic stopping power in a lightweight and flexible composite.

By implementing Dyneema®, body armor manufacturers are able to use less material in the development of their ballistic vests, plates and helmets. This leads to weight savings upwards of 30 percent when compared to competitive materials, without impacting ballistic performance. The lightweight construction of armor made with Dyneema® also mitigates injuries associated with the cumulative effects of daily armor use – while improving situational awareness, as well as cognitive and tactical performance.

While decreasing the load on the wearer, Dyneema® is simultaneously able to reduce the impact of material manufacturing on our planet. In line with DSM’s commitment to protect people and the environment they live in, we have developed the first-ever bio-based ultra-high molecular weight polyethylene fiber and unidirectional (UD) material. Bio-based Dyneema® boasts the same exact performance as conventional Dyneema® with a carbon footprint that is 90 percent lower than generic HMPE.

Source:

DSM Protective Materials / EMG

29.09.2021

The Renewable Materials Conference 2022

  • 10–12 May 2022, Cologne, Germany (hybrid)
  • The unique concept of presenting all renewable material solutions at one event hits the mark: bio-based, CO2-based and recycled are the only alternatives to fossil-based chemicals and materials

Ready-to-use fossil-free sustainable material solutions with a low carbon footprint are in fast-growing demand. Innovative brand owners are keeping an eye out for such solutions, in particular those that will soon reach the mainstream.

  • 10–12 May 2022, Cologne, Germany (hybrid)
  • The unique concept of presenting all renewable material solutions at one event hits the mark: bio-based, CO2-based and recycled are the only alternatives to fossil-based chemicals and materials

Ready-to-use fossil-free sustainable material solutions with a low carbon footprint are in fast-growing demand. Innovative brand owners are keeping an eye out for such solutions, in particular those that will soon reach the mainstream.

For the second time, nova-Institute presents numerous market highlights from bio- and CO2-based chemicals and materials as well as from chemical recycling: All material solutions based on renewable carbon. Together, there is sufficient potential to completely replace petrochemicals by 2050. To tackle climate change at its roots, all additional fossil carbon from the ground must be substituted with renewable alternatives. Over the course of three days, participants will get a comprehensive overview of the latest developments in the renewable material sector, with a focus on industry-ready solutions from a wide spectrum of sustainable raw materials and technologies.

In 2021, the new concept of the Renewable Materials Conference generated an outstanding response, which exceeded all expectations: 420 online participants witnessed a firework of innovations of non-fossil material. 60 speakers, 11 panel discussions, 500 public posts and 1,500 networking activities were proof of the lively exchange during the three conference days.

In 2022, nova-Institute plans to host the conference physically in the heart of Germany's fourth largest city, Cologne, just a few hours away from France, Belgium and the Netherlands. Expected are 400 participants on-site and many more online. On-site, the conference will be accompanied by a large exhibition where companies and institutes can showcase their recent developments. The supporting program, networking activities and many secluded spots at the location offers excellent opportunities to make new business contacts and refresh old ones.

The focus of the conference: All material solutions based on renewable carbon – avoiding the use of additional fossil carbon. The entire spectrum of renewable materials is covered: bio-based, CO2- based and recycled.

The program includes a diverse range of bio-based materials such as bio-based polymers, plastics and biocomposites (first and second generation, biowaste), CO2-based materials (from fossil and biogenic point sources, atmosphere) as well as mechanically and chemically recycled materials.

Source:

nova-Institut GmbH

15.09.2021

Kelheim Fibres Innovative Viscose Specialities at INDEX20

Not only since 2021 has sustainability been a topic high on society’s agenda. And yet the importance of sustainability for consumers and companies has once again increased sharply as a result of the Corona pandemic, as numerous studies confirm. Then why is it often so difficult to implement this conviction in everyday life? One of the biggest obstacles to sustainable consumer behaviour is the lack of availability of alternatives.

In addition to changing consumer demands, the EU Commission's recent decision on the single-use plastics directive is also prompting many nonwovens manufacturers to look at alternative solutions. Kelheim Fibres is exhibiting at this year's INDEX in Geneva and online with bio-based fibers that offer an alternative to synthetic materials in a wide range of applications. The Bavarians have decades of experience in the nonwovens and hygiene sectors and work on individual customer-specific innovations.

Not only since 2021 has sustainability been a topic high on society’s agenda. And yet the importance of sustainability for consumers and companies has once again increased sharply as a result of the Corona pandemic, as numerous studies confirm. Then why is it often so difficult to implement this conviction in everyday life? One of the biggest obstacles to sustainable consumer behaviour is the lack of availability of alternatives.

In addition to changing consumer demands, the EU Commission's recent decision on the single-use plastics directive is also prompting many nonwovens manufacturers to look at alternative solutions. Kelheim Fibres is exhibiting at this year's INDEX in Geneva and online with bio-based fibers that offer an alternative to synthetic materials in a wide range of applications. The Bavarians have decades of experience in the nonwovens and hygiene sectors and work on individual customer-specific innovations.

"We want to make it easy for consumers to choose an environmentally friendly option. That’s the case when bio-based solutions offer the same performance as synthetic products," said Matthew North, Commercial Director at Kelheim Fibres." Our fibre technology allows us to create just that: unlike natural fibres, which are available already in fibre form and can only be treated on the surface, we can engineer the properties of our fibres they need for specific applications by specifically intervening in the production process. That way we combine nature - our fibres are made of wood pulp - with performance."

Kelheim's special fibres are made of wood pulp from sustainably managed sources, are produced in Kelheim in an environmentally friendly way and are fully biodegradable at the end of their product life. Kelheim Fibres is the first viscose fibre manufacturer in the world with an EMAS validated Environmental Management System and was awarded a dark green/light green shirt in the most recent Canopy HotButton-Ranking.

More information:
Kelheim Fibres viscose fibers
Source:

Kelheim Fibres GmbH

Graphical material: Borealis
26.08.2021

Drinking cups using chemically recycled polypropylene

Swiss dairy company Emmi is partnering with Borealis and Greiner Packaging to produce iced coffed drinking cups using chemically recycled polypropylene.

The cups are produced by Greiner Packaging and the chemically recycled material comes from Borealis, one of the world’s leading providers of advanced and circular polyolefin solutions based in Vienna, Austria.

Emmi, Switzerland’s largest milk processor is committed to climate protection and the circular economy. The dairy company has the stated goal to make all of its packaging 100% recyclable and is committed to various measures to promote circularity such as packaging that contains at least 30% recyclate by 2027.

Swiss dairy company Emmi is partnering with Borealis and Greiner Packaging to produce iced coffed drinking cups using chemically recycled polypropylene.

The cups are produced by Greiner Packaging and the chemically recycled material comes from Borealis, one of the world’s leading providers of advanced and circular polyolefin solutions based in Vienna, Austria.

Emmi, Switzerland’s largest milk processor is committed to climate protection and the circular economy. The dairy company has the stated goal to make all of its packaging 100% recyclable and is committed to various measures to promote circularity such as packaging that contains at least 30% recyclate by 2027.

From September 2021 Emmi will use at least 100 tonnes of plastic based on the recycled material each year. Chemical recycling renews plastic back to plastic creating recycled materials with a level of purity equivalent to fossil-fuel based PP and hence, fit for protective, food-safe and other demanding applications. In this way, Emmi is utilizing difficult to recycle feedstock preventing plastic waste that would be likely landfilled or incinerated. In the future, depending on the availability of suitable material, the amount of recycled plastic in packaging is to be further increased.

The new technology to recover the polypropylene is currently still in its infancy, where Greiner Packaging and Borealis are leading the way. Only limited quantities of chemically recycled polypropylene are currently available, and Emmi is one of only a few food manufacturers to have secured a share of the chemically recycled polypropylene plastic through its early commitment and long-standing collaboration with the development companies.

The chemically recycled material used for the cups consists entirely and solely of ISCC (International Sustainability & Carbon Certification) material, on a mass balance basis. Mass balance is a methodology that makes it possible to track the amount and sustainability characteristics of circular and/or bio-based content in the value chain and through each step of the process. This provides transparency ultimately also to the consumers, enabling them to know that the product they are buying is based on this renewable material.

More information:
Polypropylen Borealis
Source:

Borealis

(c) lululemon
18.08.2021

Genomatica partners with lululemon bring bio-nylon to apparel

  • Renewably Sourced Materials to Help Replace Petrochemicals in Apparel for a Healthier Planet

lululemon athletica inc. (NASDAQ:LULU) announced a multi-year collaboration with sustainable materials leader Genomatica to bring renewably-sourced, bio-based materials into lululemon’s products. This represents lululemon’s first-ever equity investment in a sustainable materials company and Genomatica’s largest partnership within the retail industry. Together, the two companies will create a lower-impact, plant-based nylon to replace conventional nylon, which is the largest volume of synthetic material currently used to make lululemon products.

Genomatica uses biotechnology and fermentation to convert plant-based ingredients into widely used chemical building blocks, like those used to make nylon. These building blocks are converted to pellets and yarns, and the companies will be working closely with lululemon’s fabric supply chain to incorporate this material into future products. Through this collaboration, the companies seek to create positive change within the $22B global nylon market by building more sustainable supply chains.  

  • Renewably Sourced Materials to Help Replace Petrochemicals in Apparel for a Healthier Planet

lululemon athletica inc. (NASDAQ:LULU) announced a multi-year collaboration with sustainable materials leader Genomatica to bring renewably-sourced, bio-based materials into lululemon’s products. This represents lululemon’s first-ever equity investment in a sustainable materials company and Genomatica’s largest partnership within the retail industry. Together, the two companies will create a lower-impact, plant-based nylon to replace conventional nylon, which is the largest volume of synthetic material currently used to make lululemon products.

Genomatica uses biotechnology and fermentation to convert plant-based ingredients into widely used chemical building blocks, like those used to make nylon. These building blocks are converted to pellets and yarns, and the companies will be working closely with lululemon’s fabric supply chain to incorporate this material into future products. Through this collaboration, the companies seek to create positive change within the $22B global nylon market by building more sustainable supply chains.  

More information:
lululemon Genomatica bio-based nylon
Source:

Method Communications

Photo: norda: DSMPMPR010
14.07.2021

norda™: Flagship product with DSM’s bio-based Dyneema® fiber

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, confirmed the introduction of the first seamless trail running shoe made with bio-based Dyneema® fiber by norda™, a Canadian shoe brand.

Designed for runners by runners, norda™ was founded under the mission to empower athletes to unlock their peak potential through innovation and cutting-edge technology. The brand’s flagship product, norda™001, utilizes bio-based Dyneema® fiber to enhance performance and sustainability in a lightweight construction.

The shoe upper is seamlessly constructed with Dyneema® fabric, which benefits from the intrinsic properties of Dyneema®, the world’s strongest fiber™. Dyneema® fiber is engineered at the molecular level to provide high strength, low weight, waterproof and breathable properties – fusing the technical performance of ultra-light materials with aesthetic design that does not sacrifice strength or durability.

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, confirmed the introduction of the first seamless trail running shoe made with bio-based Dyneema® fiber by norda™, a Canadian shoe brand.

Designed for runners by runners, norda™ was founded under the mission to empower athletes to unlock their peak potential through innovation and cutting-edge technology. The brand’s flagship product, norda™001, utilizes bio-based Dyneema® fiber to enhance performance and sustainability in a lightweight construction.

The shoe upper is seamlessly constructed with Dyneema® fabric, which benefits from the intrinsic properties of Dyneema®, the world’s strongest fiber™. Dyneema® fiber is engineered at the molecular level to provide high strength, low weight, waterproof and breathable properties – fusing the technical performance of ultra-light materials with aesthetic design that does not sacrifice strength or durability.

In addition to the increased foot stability and wearer comfort of the upper, Dyneema® fibers are also used to increase abrasion resistance and stretch in the shoe laces – providing four times the level of strength when compared to standard lace materials like nylon and polyester.

“When we set out to create the norda™ 001, our mission was to design an ultra-strong and durable high performance trail running shoe, and do it as sustainably as possible,” states Willamina and Nick Martire, Co-Founders, norda™. “To achieve our goal, we had to look outside of the standard materials used by the footwear industry. We realized the properties of bio-based Dyneema® beat everything available today.”

In line with DSM’s commitment to protect people and the environment they live in, bio-based Dyneema® boasts the same exact performance as conventional Dyneema® with a carbon footprint that is 90 percent lower than generic HMPE. Sourced from renewable, bio-based feedstock, DSM’s latest advancement in fiber technology uses the mass balance approach to further reduce the reliance on fossil fuel based resources, while still contributing to a more circular economy.

Source:

EMG for DSM